linux-kernel - [PATCH v6 0/3]mmc: implement eMMC4.4 standard HW reset feature

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20101227101305.GA20143@intel.com>
Date:	Mon, 27 Dec 2010 18:13:05 +0800
From:	Chuanxiao Dong <chuanxiao.dong@...el.com>
To:	linux-mmc@...r.kernel.org
Cc:	linux-kernel@...r.kernel.org, cjb@...top.org,
	akpm@...ux-foundation.org
Subject: [PATCH v6 0/3]mmc: implement eMMC4.4 standard HW reset feature

Hi all,
   This is the version 6 of hardware reset feature implementation. When eMMC
   card cannot response any command, signal RST_n can help to reset eMMC
   card.

   patch1: enable HW reset capability if card supports.
   patch2: do hardware reset if card occurs read/write/erase timeout
   patch3: implement hwreset_emmc and reinit_emmc callbacks. In this patch,
   hwreset_emmc callback will pull up/down the corresponded GPIO line number
   to trigger RST_n signal.

   change log:
   1. Move hardware_reset callback to mmc_bus_ops so that all kinds of host
   controller can use hardware_reset callback to trigger RST_n signal.
   Different host controller only needs to provide a GPIO line number to
   this callback.
   2. Add GPIO pull up/down part in hardware_reset callback.
   3. Remove reset_emmc callback in sdhci_ops.

Thanks
Chuanxiao
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/