| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Pine.LNX.4.64.1012302028100.13281@axis700.grange>
Date: Thu, 30 Dec 2010 20:38:43 +0100 (CET)
From: Guennadi Liakhovetski <g.liakhovetski@....de>
To: Alberto Panizzo <alberto.panizzo@...il.com>
cc: Mauro Carvalho Chehab <mchehab@...radead.org>,
Hans Verkuil <hverkuil@...all.nl>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Magnus Damm <damm@...nsource.se>,
Márton Németh <nm127@...email.hu>,
linux-media@...r.kernel.org,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/3] mx3_camera: Support correctly the YUV222 and BAYER
configurations of CSI
On Sat, 18 Dec 2010, Guennadi Liakhovetski wrote:
> Alberto
>
> it would be slowly on the time to address my comments and submit updates.
> While at it, also, please update the subject - you probably meant "YUV422"
> or "YUV444" there, also below:
Ok, I'm dropping this patch
Alberto, I've applied and pushed your other 2 patches from this series,
but I've dropped this one. The reason is not (only), that you didn't reply
to my two last mails with update-requests. But because of that I took the
time today to look deeper into detail at this patch. And as a result, I
don't think it is correct.
Currently the mx3_camera driver transfers data from video clients (camera
sensors) only in one mode - as raw data, 1-to-1. This is extablished in
the way, how it creates format translation tables during the initial
negotiation with client drivers in mx3_camera_get_formats().
Your patch is trying to add support for specific modes on CSI, but is only
doing this in the transfer part of the driver, and not in the negotiation
part. So, if you really need native support for various pixel formats,
this is a wrong way to do this. If you only want to transfer data from
your sensor into RAM and the current driver is failing for you, then this
is a wrong way to do this, and the bug has to be found and fixed, while
maintaining the present pass-through only model.
Thanks
Guennadi
> On Wed, 1 Dec 2010, Guennadi Liakhovetski wrote:
>
> > On Sun, 28 Nov 2010, Alberto Panizzo wrote:
> >
> > > This patch is tested and works with the OV2640 camera that output
> > > YUV422 (UYVY) and RGB565 data.
> > >
> > > The YUV422 format is managed to be converted in IPU internal YUV444 format
> > > so this stream could be used in the future to feed directly other IPU
> > > blocks.
> > > The RGB565 format is managed as GENERIC and can be moved only from CSI
> > > to memory.
> > >
> > > Signed-off-by: Alberto Panizzo <maramaopercheseimorto@...il.com>
> > > ---
> > >
> > > Before applying, please give me feedback if this break in some way other
> > > pixel formats!
> > >
> > >
> > > drivers/media/video/mx3_camera.c | 126 +++++++++++++++++++++++++++++++++-----
> > > 1 files changed, 110 insertions(+), 16 deletions(-)
> > >
> > > diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
> > > index 29c5fc3..6811d6f 100644
> > > --- a/drivers/media/video/mx3_camera.c
> > > +++ b/drivers/media/video/mx3_camera.c
> > > @@ -55,6 +55,31 @@
> > > #define CSI_SENS_CONF_EXT_VSYNC_SHIFT 15
> > > #define CSI_SENS_CONF_DIVRATIO_SHIFT 16
> > >
> > > +/*
> > > + * IPU support the following data formatting (44.1.1.3 Data Flows and Formats):
> > > + * 1 YUV 4:4:4 or RGBâ8 bits per color component
> > > + * 2 YUV 4:4:4 or RGBâ10 bits per color component
>
> don't know what characters are those. Please, replace with ASCII.
>
> Thanks
> Guennadi
>
> > > + * 3 Generic data (from sensor to the system memory only)
> > > + * The formats 1 and 2 are aligned in words of 32 bits, 3 is free and not
> > > + * recognized by IPU blocks.
> > > + *
> > > + * Taking the value of SENS_DATA_FORMAT and DATA_WIDTH, the CSI tries to
> > > + * align (or rearrange) the sampled data to fit the IPU supported formats
> > > + * as follows:
> > > + * - CSI_SENS_CONF_DATA_FMT_RGB_YUV444: It consider the pixel as a sequence of
> > > + * 3 components of width DATA_WIDTH aligning these to a 32 bit word.
> > > + * The CSI output in this case can feed other IPU blocks.
> > > + * - CSI_SENS_CONF_DATA_FMT_YUV422: It consider the pixel as a sequence of
> > > + * 2 components of width DATA_WIDTH were the first is the alternating U V
> >
> > s/were/where/
> >
> > > + * components and the second is Y. It construct the YUV444 word repeating
> > > + * the previous U, V samples aligning the results to a 32 bit word.
> > > + * The CSI output in this case can feed other IPU blocks.
> > > + * - CSI_SENS_CONF_DATA_FMT_BAYER: No rework is performed in this case.
> > > + * The sensor data is given as is, considering _every sample_ as a pixel
> > > + * data. This format (combined with the GENERIC IPU pixel formats) can
> > > + * carry all the other sensor pixel formats to the system memory.
> > > + * The CSI output in this case _can not_ feed other IPU blocks.
> > > + */
> > > #define CSI_SENS_CONF_DATA_FMT_RGB_YUV444 (0UL << CSI_SENS_CONF_DATA_FMT_SHIFT)
> > > #define CSI_SENS_CONF_DATA_FMT_YUV422 (2UL << CSI_SENS_CONF_DATA_FMT_SHIFT)
> > > #define CSI_SENS_CONF_DATA_FMT_BAYER (3UL << CSI_SENS_CONF_DATA_FMT_SHIFT)
> > > @@ -323,14 +348,12 @@ static enum pixel_fmt fourcc_to_ipu_pix(__u32 fourcc)
> > > {
> > > /* Add more formats as need arises and test possibilities appear... */
> > > switch (fourcc) {
> > > - case V4L2_PIX_FMT_RGB565:
> > > - return IPU_PIX_FMT_RGB565;
> > > case V4L2_PIX_FMT_RGB24:
> > > return IPU_PIX_FMT_RGB24;
> > > + case V4L2_PIX_FMT_UYVY:
> > > + return IPU_PIX_FMT_UYVY;
> > > + case V4L2_PIX_FMT_RGB565:
> > > case V4L2_PIX_FMT_RGB332:
> > > - return IPU_PIX_FMT_RGB332;
> > > - case V4L2_PIX_FMT_YUV422P:
> > > - return IPU_PIX_FMT_YVU422P;
> > > default:
> > > return IPU_PIX_FMT_GENERIC;
> > > }
> >
> > Ok, so far mx3_camera has only been used with mt9m022 and mt9t031 sensors
> > (from what I can see in the mainline), both are bayer. It can also work
> > with monochrome cameras, and that would be the IPU_PIX_FMT_GENERIC case
> > too. So, I wouldn't mind removing the rest, and only adding / fixing what
> > you've now tested / implemented with your omnivision sensor. If anyone is
> > using mx3_camera with any other formats and thinks, that they work -
> > please, shout now. I'll probably also post a separate mail with this
> > warning.
> >
> > > @@ -358,9 +381,25 @@ static void mx3_videobuf_queue(struct videobuf_queue *vq,
> > >
> > > /* This is the configuration of one sg-element */
> > > video->out_pixel_fmt = fourcc_to_ipu_pix(fourcc);
> > > - video->out_width = icd->user_width;
> > > - video->out_height = icd->user_height;
> > > - video->out_stride = icd->user_width;
> > > +
> > > + if (video->out_pixel_fmt == IPU_PIX_FMT_GENERIC) {
> > > + /*
> > > + * IPU_PIX_FMT_GENERIC transport bytes, not pixels. So convert
> > > + * video->out_width and stride to the correct unit.
> > > + */
> > > + int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
> > > + icd->current_fmt->host_fmt);
> > > + BUG_ON(bytes_per_line <= 0);
> > > +
> > > + video->out_width = bytes_per_line;
> > > + video->out_height = icd->user_height;
> > > + video->out_stride = bytes_per_line;
> > > + } else {
> > > + /* For IPU known formats the pixel unit is OK */
> > > + video->out_width = icd->user_width;
> > > + video->out_height = icd->user_height;
> > > + video->out_stride = icd->user_width;
> > > + }
> > >
> > > #ifdef DEBUG
> > > /* helps to see what DMA actually has written */
> > > @@ -730,18 +769,68 @@ static int mx3_camera_get_formats(struct soc_camera_device *icd, unsigned int id
> > > if (xlate) {
> > > xlate->host_fmt = fmt;
> > > xlate->code = code;
> > > + dev_dbg(dev, "Providing format %c%c%c%c in pass-through mode\n",
> > > + (xlate->host_fmt->fourcc >> (0*8)) & 0xFF,
> > > + (xlate->host_fmt->fourcc >> (1*8)) & 0xFF,
> > > + (xlate->host_fmt->fourcc >> (2*8)) & 0xFF,
> > > + (xlate->host_fmt->fourcc >> (3*8)) & 0xFF);
> > > xlate++;
> > > - dev_dbg(dev, "Providing format %x in pass-through mode\n",
> > > - xlate->host_fmt->fourcc);
> >
> > make it even simpler: s/xlate->host_fmt/fmt/g
> >
> > > }
> > >
> > > return formats;
> > > }
> > >
> > > +static int samples_per_pixel(enum v4l2_mbus_pixelcode mcode)
> > > +{
> > > + switch (mcode) {
> > > + case V4L2_MBUS_FMT_YUYV8_2X8:
> > > + case V4L2_MBUS_FMT_YVYU8_2X8:
> > > + case V4L2_MBUS_FMT_VYUY8_2X8:
> > > + case V4L2_MBUS_FMT_YVYU10_2X10:
> > > + case V4L2_MBUS_FMT_YUYV10_2X10:
> > > + case V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE:
> > > + case V4L2_MBUS_FMT_RGB444_2X8_PADHI_BE:
> > > + case V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE:
> > > + case V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE:
> > > + case V4L2_MBUS_FMT_RGB565_2X8_LE:
> > > + case V4L2_MBUS_FMT_RGB565_2X8_BE:
> > > + case V4L2_MBUS_FMT_BGR565_2X8_LE:
> > > + case V4L2_MBUS_FMT_BGR565_2X8_BE:
> > > + return 2;
> > > + case V4L2_MBUS_FMT_SBGGR8_1X8:
> > > + case V4L2_MBUS_FMT_SBGGR10_1X10:
> > > + case V4L2_MBUS_FMT_GREY8_1X8:
> > > + case V4L2_MBUS_FMT_Y10_1X10:
> > > + case V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE:
> > > + case V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE:
> >
> > Are these two really 1 sample per pixel?
> >
> > > + case V4L2_MBUS_FMT_SGRBG8_1X8:
> > > + return 1;
> > > + default:
> > > + /* Add other pixel codes as needed */
> > > + return 0;
> > > + }
> > > +}
> >
> > Let's just do the following:
> >
> > s32 soc_mbus_samples_per_pixel(const struct soc_mbus_pixelfmt *mf)
> > {
> > switch (mf->packing) {
> > case SOC_MBUS_PACKING_NONE:
> > case SOC_MBUS_PACKING_EXTEND16:
> > return 1;
> > case SOC_MBUS_PACKING_2X8_PADHI:
> > case SOC_MBUS_PACKING_2X8_PADLO:
> > return 2;
> > }
> > return -EINVAL;
> > }
> > EXPORT_SYMBOL(soc_mbus_samples_per_pixel);
> >
> > in drivers/media/video/soc_mediabus.c, agree?
> >
> > > +
> > > static void configure_geometry(struct mx3_camera_dev *mx3_cam,
> > > - unsigned int width, unsigned int height)
> > > + unsigned int width, unsigned int height,
> > > + enum v4l2_mbus_pixelcode code)
> > > {
> > > u32 ctrl, width_field, height_field;
> > > + const struct soc_mbus_pixelfmt *fmt;
> > > +
> > > + fmt = soc_mbus_get_fmtdesc(code);
> > > + BUG_ON(!fmt);
> > > +
> > > + if (fourcc_to_ipu_pix(fmt->fourcc) == IPU_PIX_FMT_GENERIC) {
> > > + /*
> > > + * As we don't have an IPU native format, the CSI will be
> > > + * configured to output BAYER and here we need to convert
> > > + * geometry unit from pixels to samples.
> > > + * TODO: Support vertical down sampling (YUV420)
> > > + */
> > > + width = width * samples_per_pixel(code);
> > > + BUG_ON(!width);
> > > + }
> >
> > width *= soc_mbus_samples_per_pixel(fmt);
> > BUG_ON((int)width < 0);
> >
> > >
> > > /* Setup frame size - this cannot be changed on-the-fly... */
> > > width_field = width - 1;
> > > @@ -850,7 +939,7 @@ static int mx3_camera_set_crop(struct soc_camera_device *icd,
> > > return ret;
> > > }
> > >
> > > - configure_geometry(mx3_cam, mf.width, mf.height);
> > > + configure_geometry(mx3_cam, mf.width, mf.height, mf.code);
> > > }
> > >
> > > dev_dbg(icd->dev.parent, "Sensor cropped %dx%d\n",
> > > @@ -893,7 +982,7 @@ static int mx3_camera_set_fmt(struct soc_camera_device *icd,
> > > * mxc_v4l2_s_fmt()
> > > */
> > >
> > > - configure_geometry(mx3_cam, pix->width, pix->height);
> > > + configure_geometry(mx3_cam, pix->width, pix->height, xlate->code);
> > >
> > > mf.width = pix->width;
> > > mf.height = pix->height;
> > > @@ -1112,10 +1201,15 @@ static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
> > > (3 << CSI_SENS_CONF_DATA_FMT_SHIFT) |
> > > (3 << CSI_SENS_CONF_DATA_WIDTH_SHIFT));
> > >
> > > - /* TODO: Support RGB and YUV formats */
> > > + /* TODO: Support RGB_YUV444 formats */
> > >
> > > - /* This has been set in mx3_camera_activate(), but we clear it above */
> > > - sens_conf |= CSI_SENS_CONF_DATA_FMT_BAYER;
> > > + switch (xlate->code) {
> > > + case V4L2_MBUS_FMT_UYVY8_2X8:
> > > + sens_conf |= CSI_SENS_CONF_DATA_FMT_YUV422;
> > > + break;
> > > + default:
> > > + sens_conf |= CSI_SENS_CONF_DATA_FMT_BAYER;
> > > + }
> > >
> > > if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
> > > sens_conf |= 1 << CSI_SENS_CONF_PIX_CLK_POL_SHIFT;
> > > --
> > > 1.6.3.3
> >
> > If after all the above changed your set up still works, we're cool!;)
> >
> > Thanks
> > Guennadi
> > ---
> > Guennadi Liakhovetski, Ph.D.
> > Freelance Open-Source Software Developer
> > http://www.open-technology.de/
> >
>
> ---
> Guennadi Liakhovetski, Ph.D.
> Freelance Open-Source Software Developer
> http://www.open-technology.de/
>
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists