Message-ID: <D6D887BA8C9DFF48B5233887EF04654105C1251712@bgsmsx502.gar.corp.intel.com>
Date:	Mon, 3 Jan 2011 17:23:19 +0530
From:	"R, Durgadoss" <durgadoss.r@...el.com>
To:	"Yu, Fenghua" <fenghua.yu@...el.com>,
	"khali@...ux-fr.org" <khali@...ux-fr.org>,
	Guenter Roeck <guenter.roeck@...csson.com>,
	"Brown, Len" <len.brown@...el.com>,
	"mingo@...hat.com" <mingo@...hat.com>,
	"hpa@...or.com" <hpa@...or.com>
CC:	"x86@...nel.org" <x86@...nel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"lm-sensors@...sensors.org" <lm-sensors@...sensors.org>
Subject: Patch[2/2]:hwmon:Adding_Threshold_Support_to_Coretemp.c

Hi,

I am submitting a patch to enable core thermal threshold
Support to coretemp.c. There are two core thermal thresholds
available through sysfs interfaces temp1_max and temp1_max_hyst.
The temp1_max_alarm is set when temperature reaches or crosses
above temp1_max or drops below temp1_max_hyst.

This patch is generated against stable Linux-2.6 kernel.

Kindly review and merge.
----------------------------------------------------------------
From: Durgadoss R <durgadoss.r@...el.com>

Date: Sun, 19 Dec 2010 22:44:54 +0530
Subject: [PATCH 2/2] hwmon:Adding_Threshold_Support_to_Coretemp

This patch adds core thermal thresholds support to coretemp.
These thresholds can be configured via the sysfs interfaces temp1_max
and temp1_max_hyst. An interrupt is generated when CPU temperature
goes above temp1_max or drops below temp1_max_hyst.

Signed-off-by: Durgadoss R <durgadoss.r@...el.com>

---
 Documentation/hwmon/coretemp |    8 ++
 drivers/hwmon/coretemp.c     |  214 ++++++++++++++++++++++++++++++++++++++----
 2 files changed, 202 insertions(+), 20 deletions(-)

diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp
index 25568f8..615fdbe 100644
--- a/Documentation/hwmon/coretemp
+++ b/Documentation/hwmon/coretemp
@@ -29,6 +29,14 @@ the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
 
 temp1_input	 - Core temperature (in millidegrees Celsius).
 temp1_max	 - All cooling devices should be turned on (on Core2).
+		   Initialized with IA32_TEMPERATURE_TARGET if supported,
+		   otherwise initialized with (tjmax - 20). When the CPU
+		   temperature reaches this temperature, an interrupt is
+		   generated and temp1_max_alarm is set.
+temp1_max_hyst	 - If the CPU temperature falls below than temperature,
+		   an interrupt is generated and temp1_max_alarm is reset.
+temp1_max_alarm - Set if the temperature reaches or exceeds temp1_max.
+		   Reset if the temperature drops to or below temp1_max_hyst.
 temp1_crit	 - Maximum junction temperature (in millidegrees Celsius).
 temp1_crit_alarm - Set when Out-of-spec bit is set, never clears.
 		   Correct CPU operation is no longer guaranteed.
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 42de98d..025902f 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -36,11 +36,12 @@
 #include <asm/msr.h>
 #include <asm/processor.h>
 #include <asm/smp.h>
+#include <asm/mce.h>
 
 #define DRVNAME	"coretemp"
 
-typedef enum { SHOW_TEMP, SHOW_TJMAX, SHOW_TTARGET, SHOW_LABEL,
-		SHOW_NAME } SHOW;
+enum attributes { SHOW_TEMP, SHOW_TJMAX, CORE_TTARGET, CORE_TMIN, SHOW_LABEL,
+		SHOW_NAME, SHOW_CRIT_ALARM, SHOW_MAX_ALARM } attrs;
 
 /*
  * Functions declaration
@@ -59,9 +60,14 @@ struct coretemp_data {
 	int temp;
 	int tjmax;
 	int ttarget;
-	u8 alarm;
+	int tmin;
+	u8 max_alarm;
+	u8 crit_alarm;
 };
 
+static void update_alarm(struct coretemp_data *data);
+static int set_core_threshold(struct coretemp_data *data, int temp, int thres);
+
 /*
  * Sysfs stuff
  */
@@ -83,9 +89,15 @@ static ssize_t show_name(struct device *dev, struct device_attribute
 static ssize_t show_alarm(struct device *dev, struct device_attribute
 			  *devattr, char *buf)
 {
-	struct coretemp_data *data = coretemp_update_device(dev);
-	/* read the Out-of-spec log, never clear */
-	return sprintf(buf, "%d\n", data->alarm);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct coretemp_data *data = dev_get_drvdata(dev);
+
+	update_alarm(data);
+	if (attr->index == SHOW_CRIT_ALARM)
+		/* read the Out-of-spec log, never clear */
+		return sprintf(buf, "%d\n", data->crit_alarm);
+
+	return sprintf(buf, "%d\n", data->max_alarm);
 }
 
 static ssize_t show_temp(struct device *dev,
@@ -93,33 +105,67 @@ static ssize_t show_temp(struct device *dev,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct coretemp_data *data = coretemp_update_device(dev);
-	int err;
+	int err = -EINVAL;
 
-	if (attr->index == SHOW_TEMP)
+	switch (attr->index) {
+	case SHOW_TEMP:
 		err = data->valid ? sprintf(buf, "%d\n", data->temp) : -EAGAIN;
-	else if (attr->index == SHOW_TJMAX)
+		break;
+	case SHOW_TJMAX:
 		err = sprintf(buf, "%d\n", data->tjmax);
-	else
+		break;
+	case CORE_TTARGET:
 		err = sprintf(buf, "%d\n", data->ttarget);
+		break;
+	case CORE_TMIN:
+		err = sprintf(buf, "%d\n", data->tmin);
+		break;
+	}
+
 	return err;
 }
 
+
+static ssize_t store_temp(struct device *dev,
+		struct device_attribute *devattr, const char *buf, size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct coretemp_data *data = dev_get_drvdata(dev);
+	unsigned long val;
+	int err;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+
+	err = set_core_threshold(data, val, attr->index);
+
+	return err ? err : count;
+}
+
 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL,
 			  SHOW_TEMP);
 static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp, NULL,
 			  SHOW_TJMAX);
-static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL,
-			  SHOW_TTARGET);
-static DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp,
+						store_temp, CORE_TTARGET);
+static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_temp,
+						store_temp, CORE_TMIN);
+static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL,
+							SHOW_CRIT_ALARM);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL,
+							SHOW_MAX_ALARM);
 static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_name, NULL, SHOW_LABEL);
 static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, SHOW_NAME);
 
 static struct attribute *coretemp_attributes[] = {
 	&sensor_dev_attr_name.dev_attr.attr,
 	&sensor_dev_attr_temp1_label.dev_attr.attr,
-	&dev_attr_temp1_crit_alarm.attr,
+	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
 	&sensor_dev_attr_temp1_crit.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
 	NULL
 };
 
@@ -127,6 +173,26 @@ static const struct attribute_group coretemp_group = {
 	.attrs = coretemp_attributes,
 };
 
+static void update_alarm(struct coretemp_data *data)
+{
+	u32 eax, edx;
+
+	rdmsr_on_cpu(data->id, MSR_IA32_THERM_STATUS, &eax, &edx);
+
+	/* Update the critical temperature alarm */
+	data->crit_alarm = (eax >> 5) & 1;
+
+	/* Temperature reached threshold1 */
+	if (eax & THERM_LOG_THRESHOLD1)
+		data->max_alarm = 1;
+	/* Temperature reached threshold0 */
+	else if (eax & THERM_LOG_THRESHOLD0)
+		data->max_alarm = 0;
+	/* If none of these cases, don't update max_alarm */
+
+	return;
+}
+
 static struct coretemp_data *coretemp_update_device(struct device *dev)
 {
 	struct coretemp_data *data = dev_get_drvdata(dev);
@@ -138,7 +204,6 @@ static struct coretemp_data *coretemp_update_device(struct device *dev)
 
 		data->valid = 0;
 		rdmsr_on_cpu(data->id, MSR_IA32_THERM_STATUS, &eax, &edx);
-		data->alarm = (eax >> 5) & 1;
 		/* update only if data has been valid */
 		if (eax & 0x80000000) {
 			data->temp = data->tjmax - (((eax >> 16)
@@ -298,6 +363,106 @@ static void __devinit get_ucode_rev_on_cpu(void *edx)
 	rdmsr(MSR_IA32_UCODE_REV, eax, *(u32 *)edx);
 }
 
+/* Platform thermal Interrupt Handler */
+static int coretemp_interrupt(__u64 msr_val)
+{
+
+	if (msr_val & THERM_LOG_THRESHOLD0) {
+		if (!(msr_val & THERM_STATUS_THRESHOLD0))
+			pr_info("%s:Lower Threshold Reached\n", __func__);
+		/* Reset the Threshold0 interrupt */
+		wrmsrl(MSR_IA32_THERM_STATUS, msr_val & ~THERM_LOG_THRESHOLD0);
+	}
+
+	if (msr_val & THERM_LOG_THRESHOLD1) {
+		if (msr_val & THERM_STATUS_THRESHOLD1)
+			pr_info("%s:Upper Threshold Reached\n", __func__);
+		/* Reset the Threshold1 interrupt */
+		wrmsrl(MSR_IA32_THERM_STATUS, msr_val & ~THERM_LOG_THRESHOLD1);
+	}
+
+	return 0;
+}
+
+static void configure_apic(void *info)
+{
+	u32 l;
+	int *flag = (int *)info;
+
+	l = apic_read(APIC_LVTTHMR);
+
+	if (*flag)	/* Non-Zero flag Masks the APIC */
+		apic_write(APIC_LVTTHMR, l | APIC_LVT_MASKED);
+	else		/* Zero flag UnMasks the APIC */
+		apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+}
+
+static int set_core_threshold(struct coretemp_data *data, int temp, int thres)
+{
+	u32 eax, edx;
+	int diff;
+	int flag = 1;
+
+	if (temp > data->tjmax)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+
+	diff = (data->tjmax - temp)/1000;
+
+	/* Mask the APIC */
+	smp_call_function_single(data->id, &configure_apic, &flag, 1);
+
+	rdmsr_on_cpu(data->id, MSR_IA32_THERM_INTERRUPT, &eax, &edx);
+
+	if (thres == CORE_TMIN) {
+		eax = (eax & ~THERM_MASK_THRESHOLD0) |
+					(diff << THERM_SHIFT_THRESHOLD0);
+		data->tmin = temp;
+	} else {
+		eax = (eax & ~THERM_MASK_THRESHOLD1) |
+					(diff << THERM_SHIFT_THRESHOLD1);
+		data->ttarget = temp;
+	}
+
+	wrmsr_on_cpu(data->id, MSR_IA32_THERM_INTERRUPT, eax, edx);
+
+	/* Unmask the APIC */
+	flag = 0;
+	smp_call_function_single(data->id, &configure_apic, &flag, 1);
+
+	mutex_unlock(&data->update_lock);
+	return 0;
+}
+
+static int __devinit config_thresh_intrpt(struct coretemp_data *data,
+								int enable)
+{
+	u32 eax, edx;
+	int flag = 1; /* Non-Zero Flag masks the apic */
+
+	smp_call_function_single(data->id, &configure_apic, &flag, 1);
+
+	rdmsr_on_cpu(data->id, MSR_IA32_THERM_INTERRUPT, &eax, &edx);
+
+	if (enable) {
+		eax |= (THERM_INT_THRESHOLD0_ENABLE |
+						THERM_INT_THRESHOLD1_ENABLE);
+		platform_thermal_notify = coretemp_interrupt;
+	} else {
+		eax &= (~(THERM_INT_THRESHOLD0_ENABLE |
+						THERM_INT_THRESHOLD1_ENABLE));
+		platform_thermal_notify = NULL;
+	}
+
+	wrmsr_on_cpu(data->id, MSR_IA32_THERM_INTERRUPT, eax, edx);
+
+	flag = 0; /*Flag should be zero to unmask the apic */
+	smp_call_function_single(data->id, &configure_apic, &flag, 1);
+
+	return 0;
+}
+
 static int __devinit coretemp_probe(struct platform_device *pdev)
 {
 	struct coretemp_data *data;
@@ -351,6 +516,10 @@ static int __devinit coretemp_probe(struct platform_device *pdev)
 	}
 
 	data->tjmax = get_tjmax(c, data->id, &pdev->dev);
+	/* Initialize ttarget value. If IA32_TEMPERATURE_TARGET is
+	 * supported, this value will be over written below
+	 */
+	data->ttarget = data->tjmax - 20000;
 	platform_set_drvdata(pdev, data);
 
 	/*
@@ -368,13 +537,18 @@ static int __devinit coretemp_probe(struct platform_device *pdev)
 		} else {
 			data->ttarget = data->tjmax -
 					(((eax >> 8) & 0xff) * 1000);
-			err = device_create_file(&pdev->dev,
-					&sensor_dev_attr_temp1_max.dev_attr);
-			if (err)
-				goto exit_free;
 		}
 	}
 
+	/* Enable threshold interrupt support */
+	config_thresh_intrpt(data, 1);
+
+	/* Set Initial Core thresholds.
+	 * The lower and upper threshold values here are assumed
+	 */
+	set_core_threshold(data, 0, CORE_TMIN);
+	set_core_threshold(data, data->ttarget, CORE_TTARGET);
+
 	if ((err = sysfs_create_group(&pdev->dev.kobj, &coretemp_group)))
 		goto exit_dev;
 
@@ -404,7 +578,7 @@ static int __devexit coretemp_remove(struct platform_device *pdev)
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&pdev->dev.kobj, &coretemp_group);
-	device_remove_file(&pdev->dev, &sensor_dev_attr_temp1_max.dev_attr);
+	config_thresh_intrpt(data, 0);
 	platform_set_drvdata(pdev, NULL);
 	kfree(data);
 	return 0;
-- 
1.6.5.2


Download attachment "0002-hwmon-Adding_Threshold_Support_to_Coretemp.patch" of type "application/octet-stream" (10983 bytes)

View attachment "ATT00001..txt" of type "text/plain" (156 bytes)

Powered by blists - more mailing lists