| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <137dfad4a093ea0ac80396f5eb7fbf0c382be698.1294314772.git.viresh.kumar@st.com>
Date: Thu, 6 Jan 2011 17:29:10 +0530
From: Viresh Kumar <viresh.kumar@...com>
To: <akpm@...ux-foundation.org>, <linux-kernel@...r.kernel.org>,
<linux-pci@...r.kernel.org>
Cc: <linux-arm-kernel@...ts.infradead.org>,
Pratyush Anand <pratyush.anand@...com>,
Viresh Kumar <viresh.kumar@...com>
Subject: [PATCH V2] ST SPEAr: PCIE gadget suppport
From: Pratyush Anand <pratyush.anand@...com>
This is a configurable gadget. can be configured by sysfs interface. Any
IP available at PCIE bus can be programmed to be used by host
controller.It supoorts both INTX and MSI.
By default, gadget is configured for INTX and SYSRAM1 is mapped to BAR0
with size 0x1000
Changes since V1:
- __iomem added for register addresses
- kerneldoc comment removed whereever not required.
- help node moved from sysfs to documentation/misc-devices
- strict_strtoul used instead of sscanf
Signed-off-by: Pratyush Anand <pratyush.anand@...com>
Signed-off-by: Viresh Kumar <viresh.kumar@...com>
---
Documentation/misc-devices/spear-pcie-gadget.txt | 125 ++++
drivers/misc/Kconfig | 10 +
drivers/misc/Makefile | 1 +
drivers/misc/spear13xx_pcie_gadget.c | 856 ++++++++++++++++++++++
4 files changed, 992 insertions(+), 0 deletions(-)
create mode 100644 Documentation/misc-devices/spear-pcie-gadget.txt
create mode 100644 drivers/misc/spear13xx_pcie_gadget.c
diff --git a/Documentation/misc-devices/spear-pcie-gadget.txt b/Documentation/misc-devices/spear-pcie-gadget.txt
new file mode 100644
index 0000000..8ade869
--- /dev/null
+++ b/Documentation/misc-devices/spear-pcie-gadget.txt
@@ -0,0 +1,125 @@
+Spear PCIE Gadget Driver:
+
+Author
+=============
+pratyush anand (pratyush.anand@...com)
+
+Location
+============
+driver/misc/spear13xx_pcie_gadget.c
+
+Supported Chip:
+===================
+SPEAr1300
+SPEAr1310
+
+Menuconfig option:
+==========================
+Device Drivers
+ Misc devices
+ PCIE gadget support for SPEAr13XX platform
+purpose
+===========
+This driver has several nodes which can read/written by sysfs interface.
+Its main purpose is to configure selceted dual mode pcie controller as device
+and then program its various registers to configure it as a prticular device
+type. This driver can be used to show spear's pcie device capability.
+
+Description of different nodes:
+=================================
+
+read behaviour of nodes:
+------------------------------
+link :gives ltssm status.
+int_type :type of supported interrupt
+no_of_msi read :zero if MSI is not enabled by host.A positive value is the
+ number of MSI vector granted.
+vendor_id :returns programmed vendor id (hex)
+device_id :returns programmed device id(hex)
+bar0_size: :retruns size of bar0 in hex.
+bar0_address :returns address of bar0 mapped area in hex.
+bar0_rw_offset :returns offset of bar0 for which bar0_data will return value.
+bar0_data :returns data at bar0_rw_offset.
+
+write behaviour of nodes:
+------------------------------
+link :write UP to enable ltsmm DOWN to disable
+int_type :write interrupt type to be configured and (int_type could be
+ INTA, MSI or NO_INT).select MSI only when you have programmed
+ no_of_msi node.
+no_of_msi :number of MSI vector needed.
+inta :write 1 to assert INTA and 0 to de-assert.
+send_msi :write MSI vector to be send.
+vendor_id :write vendor id(hex) to be programmed.
+device_id :write device id(hex) to be programmed.
+bar0_size :write size of bar0 in hex. default bar0 size is 1000 (hex)
+ bytes.
+bar0_address :write address of bar0 mapped area in hex. (default mapping of
+ bar0 is SYSRAM1(E0800000).Aalways program bar size before bar
+ address. kernel might modify bar size and address to align. So
+ read back bar size and address after writing to cross check.
+bar0_rw_offset :write offset of bar0 for which bar0_data will write value.
+bar0_data :write data to be written at bar0_rw_offset.
+
+Node programming example
+===========================
+Programm all PCIE registers in such a way that when this device is connected
+to the pcie host, then host sees this device as 1MB RAM.
+
+program vendor id as 0x104a
+# echo 104A >> sys/devices/platform/pcie-gadget-spear.0/vendor_id
+
+program device id as 0xCD80
+# echo CD80 >> sys/devices/platform/pcie-gadget-spear.0/device_id
+
+program BAR0 size as 1MB
+# echo 100000 >> sys/devices/platform/pcie-gadget-spear.0/bar0_size
+
+check for programmed bar0 size
+# cat sys/devices/platform/pcie-gadget-spear.0/bar0_size
+
+program BAR0 Address as DDR (0x2100000).this is the physical address of
+memroy, which is to be made visible to pcie host.Similarly any other ip can
+also be made visible to pcie host.e.g if you program base address of UART as
+BAR0 address then when this device will be connected to a host, it will be
+seen as UART.
+# echo 2100000 >> sys/devices/platform/pcie-gadget-spear.0/bar0_address
+
+program interrupt type : INTA
+# echo INTA >> sys/devices/platform/pcie-gadget-spear.0/int_type
+
+go for link up now.
+# echo UP >> sys/devices/platform/pcie-gadget-spear.0/link
+
+It will have to be insured that, once link up is done on gadget then only host
+is started and start to search pcie devices on its port.
+
+/*wait till link is up*/
+# cat sys/devices/platform/pcie-gadget-spear.0/link
+wait till it returns UP.
+
+To assert INTA
+# echo 1 >> sys/devices/platform/pcie-gadget-spear.0/inta
+
+To de-assert INTA
+# echo 0 >> sys/devices/platform/pcie-gadget-spear.0/inta
+
+if MSI is to be used as interrupt, program no of msi vector needed (say4)
+# echo 4 >> sys/devices/platform/pcie-gadget-spear.0/no_of_msi
+
+select MSI as interrupt type
+# echo MSI >> sys/devices/platform/pcie-gadget-spear.0/int_type
+
+go for link up now
+# echo UP >> sys/devices/platform/pcie-gadget-spear.0/link
+
+wait till link is up
+# cat sys/devices/platform/pcie-gadget-spear.0/link
+wait till it returns UP.
+
+wait till msi is enabled
+# cat sys/devices/platform/pcie-gadget-spear.0/no_of_msi
+Should return 4 (number of requested MSI vector)
+
+to send msi vector 2
+# echo 2 >> sys/devices/platform/pcie-gadget-spear.0/send_msi
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4d073f1..c364a9b 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -394,6 +394,16 @@ config DS1682
This driver can also be built as a module. If so, the module
will be called ds1682.
+config SPEAR13XX_PCIE_GADGET
+ bool "PCIE gadget support for SPEAr13XX platform"
+ depends on ARCH_SPEAR13XX
+ default n
+ help
+ This option enables gadget support for PCIE controller. If
+ board file defines any controller as PCIE endpoint then a sysfs
+ entry will be created for that controller. User can use these
+ sysfs node to configure PCIE EP as per his requirements.
+
config TI_DAC7512
tristate "Texas Instruments DAC7512"
depends on SPI && SYSFS
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 98009cc..c489536 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/
obj-$(CONFIG_HMC6352) += hmc6352.o
obj-y += eeprom/
obj-y += cb710/
+obj-$(CONFIG_SPEAR13XX_PCIE_GADGET) += spear13xx_pcie_gadget.o
obj-$(CONFIG_VMWARE_BALLOON) += vmw_balloon.o
obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o
obj-$(CONFIG_PCH_PHUB) += pch_phub.o
diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
new file mode 100644
index 0000000..63f45b1
--- /dev/null
+++ b/drivers/misc/spear13xx_pcie_gadget.c
@@ -0,0 +1,856 @@
+/*
+ * drivers/misc/spear13xx_pcie_gadget.c
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Pratyush Anand<pratyush.anand@...com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci_regs.h>
+#include <linux/platform_device.h>
+#include <mach/misc_regs.h>
+#include <mach/pcie.h>
+
+#define IN0_MEM_SIZE (200 * 1024 * 1024 - 1)
+/* In current implementation address translation is done using IN0 only.
+ * So IN1 start address and IN0 end address has been kept same
+*/
+#define IN1_MEM_SIZE (0 * 1024 * 1024 - 1)
+#define IN_IO_SIZE (20 * 1024 * 1024 - 1)
+#define IN_CFG0_SIZE (12 * 1024 * 1024 - 1)
+#define IN_CFG1_SIZE (12 * 1024 * 1024 - 1)
+#define IN_MSG_SIZE (12 * 1024 * 1024 - 1)
+/* Keep default BAR size as 4K*/
+/* AORAM would be mapped by default*/
+#define INBOUND_ADDR_MASK (SPEAR13XX_SYSRAM1_SIZE - 1)
+
+#define INT_TYPE_NO_INT 0
+#define INT_TYPE_INTX 1
+#define INT_TYPE_MSI 2
+struct spear_pcie_gadget_config {
+ void __iomem *base;
+ void __iomem *va_app_base;
+ void __iomem *va_dbi_base;
+ char int_type[10];
+ unsigned long requested_msi;
+ u32 configured_msi;
+ u32 bar0_size;
+ u32 bar0_rw_offset;
+ u32 va_bar0_address;
+};
+
+static void enable_dbi_access(struct pcie_app_reg __iomem *app_reg)
+{
+ /* Enable DBI access */
+ writel(readl(&app_reg->slv_armisc) | (1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_armisc);
+ writel(readl(&app_reg->slv_awmisc) | (1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_awmisc);
+
+}
+
+static void disable_dbi_access(struct pcie_app_reg __iomem *app_reg)
+{
+ /* disable DBI access */
+ writel(readl(&app_reg->slv_armisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_armisc);
+ writel(readl(&app_reg->slv_awmisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
+ &app_reg->slv_awmisc);
+
+}
+
+static void spear_dbi_read_reg(struct spear_pcie_gadget_config *config,
+ int where, int size, u32 *val)
+{
+ struct pcie_app_reg __iomem *app_reg
+ = (struct pcie_app_reg __iomem *) config->va_app_base;
+ u32 va_address;
+
+ /* Enable DBI access */
+ enable_dbi_access(app_reg);
+
+ va_address = (u32)config->va_dbi_base + (where & ~0x3);
+
+ *val = readl(va_address);
+
+ if (size == 1)
+ *val = (*val >> (8 * (where & 3))) & 0xff;
+ else if (size == 2)
+ *val = (*val >> (8 * (where & 3))) & 0xffff;
+
+ /* Disable DBI access */
+ disable_dbi_access(app_reg);
+}
+
+static void spear_dbi_write_reg(struct spear_pcie_gadget_config *config,
+ int where, int size, u32 val)
+{
+ struct pcie_app_reg __iomem *app_reg
+ = (struct pcie_app_reg __iomem *) config->va_app_base;
+ u32 va_address;
+
+ /* Enable DBI access */
+ enable_dbi_access(app_reg);
+
+ va_address = (u32)config->va_dbi_base + (where & ~0x3);
+
+ if (size == 4)
+ writel(val, va_address);
+ else if (size == 2)
+ writew(val, va_address + (where & 2));
+ else if (size == 1)
+ writeb(val, va_address + (where & 3));
+
+ /* Disable DBI access */
+ disable_dbi_access(app_reg);
+}
+
+#define PCI_FIND_CAP_TTL 48
+
+static int pci_find_own_next_cap_ttl(struct spear_pcie_gadget_config *config,
+ u32 pos, int cap, int *ttl)
+{
+ u32 id;
+
+ while ((*ttl)--) {
+ spear_dbi_read_reg(config, pos, 1, &pos);
+ if (pos < 0x40)
+ break;
+ pos &= ~3;
+ spear_dbi_read_reg(config, pos + PCI_CAP_LIST_ID, 1, &id);
+ if (id == 0xff)
+ break;
+ if (id == cap)
+ return pos;
+ pos += PCI_CAP_LIST_NEXT;
+ }
+ return 0;
+}
+
+static int pci_find_own_next_cap(struct spear_pcie_gadget_config *config,
+ u32 pos, int cap)
+{
+ int ttl = PCI_FIND_CAP_TTL;
+
+ return pci_find_own_next_cap_ttl(config, pos, cap, &ttl);
+}
+
+static int pci_find_own_cap_start(struct spear_pcie_gadget_config *config,
+ u8 hdr_type)
+{
+ u32 status;
+
+ spear_dbi_read_reg(config, PCI_STATUS, 2, &status);
+ if (!(status & PCI_STATUS_CAP_LIST))
+ return 0;
+
+ switch (hdr_type) {
+ case PCI_HEADER_TYPE_NORMAL:
+ case PCI_HEADER_TYPE_BRIDGE:
+ return PCI_CAPABILITY_LIST;
+ case PCI_HEADER_TYPE_CARDBUS:
+ return PCI_CB_CAPABILITY_LIST;
+ default:
+ return 0;
+ }
+
+ return 0;
+}
+
+/*
+ * Tell if a device supports a given PCI capability.
+ * Returns the address of the requested capability structure within the
+ * device's PCI configuration space or 0 in case the device does not
+ * support it. Possible values for @cap:
+ *
+ * %PCI_CAP_ID_PM Power Management
+ * %PCI_CAP_ID_AGP Accelerated Graphics Port
+ * %PCI_CAP_ID_VPD Vital Product Data
+ * %PCI_CAP_ID_SLOTID Slot Identification
+ * %PCI_CAP_ID_MSI Message Signalled Interrupts
+ * %PCI_CAP_ID_CHSWP CompactPCI HotSwap
+ * %PCI_CAP_ID_PCIX PCI-X
+ * %PCI_CAP_ID_EXP PCI Express
+ */
+static int pci_find_own_capability(struct spear_pcie_gadget_config *config,
+ int cap)
+{
+ u32 pos;
+ u32 hdr_type;
+
+ spear_dbi_read_reg(config, PCI_HEADER_TYPE, 1, &hdr_type);
+
+ pos = pci_find_own_cap_start(config, hdr_type);
+ if (pos)
+ pos = pci_find_own_next_cap(config, pos, cap);
+
+ return pos;
+}
+
+static irqreturn_t spear_pcie_gadget_irq(int irq, void *dev_id)
+{
+ return 0;
+}
+
+static ssize_t pcie_gadget_show_link(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+ struct pcie_app_reg __iomem *app_reg =
+ (struct pcie_app_reg __iomem *)config->va_app_base;
+
+ if (readl(&app_reg->app_status_1) & ((u32)1 << XMLH_LINK_UP_ID))
+ return sprintf(buf, "UP");
+ else
+ return sprintf(buf, "DOWN");
+}
+
+static ssize_t pcie_gadget_store_link(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+ struct pcie_app_reg __iomem *app_reg =
+ (struct pcie_app_reg __iomem *)config->va_app_base;
+ char link[10];
+
+ if (strlen(buf) >= 10)
+ return -EINVAL;
+
+ if (sscanf(buf, "%s", link) != 1)
+ return -EINVAL;
+
+ if (!strcmp(link, "UP"))
+ writel(readl(&app_reg->app_ctrl_0) | (1 << APP_LTSSM_ENABLE_ID),
+ &app_reg->app_ctrl_0);
+ else
+ writel(readl(&app_reg->app_ctrl_0)
+ & ~(1 << APP_LTSSM_ENABLE_ID),
+ &app_reg->app_ctrl_0);
+ return count;
+}
+
+static DEVICE_ATTR(link, S_IWUSR | S_IRUGO, pcie_gadget_show_link,
+ pcie_gadget_store_link);
+
+static ssize_t pcie_gadget_show_int_type(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s", config->int_type);
+}
+
+static ssize_t pcie_gadget_store_int_type(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+ char int_type[10];
+ u32 cap, vec, flags;
+ unsigned long vector;
+
+ if (strlen(buf) >= 10)
+ return -EINVAL;
+
+ if (sscanf(buf, "%s", int_type) != 1)
+ return -EINVAL;
+
+ if (!strcmp(int_type, "INTA"))
+ spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
+
+ else if (!strcmp(int_type, "MSI")) {
+ vector = config->requested_msi;
+ vec = 0;
+ while (vector > 1) {
+ vector /= 2;
+ vec++;
+ }
+ spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 0);
+ cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
+ spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
+ flags &= ~PCI_MSI_FLAGS_QMASK;
+ flags |= vec << 1;
+ spear_dbi_write_reg(config, cap + PCI_MSI_FLAGS, 1, flags);
+ } else
+ return -EINVAL;
+
+ strcpy(config->int_type, int_type);
+
+ return count;
+}
+
+static DEVICE_ATTR(int_type, S_IWUSR | S_IRUGO, pcie_gadget_show_int_type,
+ pcie_gadget_store_int_type);
+
+static ssize_t pcie_gadget_show_no_of_msi(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+ struct pcie_app_reg __iomem *app_reg =
+ (struct pcie_app_reg __iomem *)config->va_app_base;
+ u32 cap, vector, vec, flags;
+
+ if ((readl(&app_reg->msg_status) & (1 << CFG_MSI_EN_ID))
+ != (1 << CFG_MSI_EN_ID))
+ vector = 0;
+ else {
+ cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
+ spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
+ flags &= ~PCI_MSI_FLAGS_QSIZE;
+ vec = flags >> 4;
+ vector = 1;
+ while (vec--)
+ vector *= 2;
+ }
+ config->configured_msi = vector;
+
+ return sprintf(buf, "%u", vector);
+}
+
+static ssize_t pcie_gadget_store_no_of_msi(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+
+ if (strict_strtoul(buf, 0, &config->requested_msi))
+ return -EINVAL;
+ if (config->requested_msi > 32)
+ config->requested_msi = 32;
+
+ return count;
+}
+
+static DEVICE_ATTR(no_of_msi, S_IWUSR | S_IRUGO, pcie_gadget_show_no_of_msi,
+ pcie_gadget_store_no_of_msi);
+
+static ssize_t pcie_gadget_store_inta(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+ struct pcie_app_reg __iomem *app_reg =
+ (struct pcie_app_reg __iomem *)config->va_app_base;
+ unsigned long en;
+
+ if (strict_strtoul(buf, 0, &en))
+ return -EINVAL;
+
+ if (en)
+ writel(readl(&app_reg->app_ctrl_0) | (1 << SYS_INT_ID),
+ &app_reg->app_ctrl_0);
+ else
+ writel(readl(&app_reg->app_ctrl_0) & ~(1 << SYS_INT_ID),
+ &app_reg->app_ctrl_0);
+
+ return count;
+}
+
+static DEVICE_ATTR(inta, S_IWUSR, NULL, pcie_gadget_store_inta);
+
+static ssize_t pcie_gadget_store_send_msi(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+ struct pcie_app_reg __iomem *app_reg =
+ (struct pcie_app_reg __iomem *)config->va_app_base;
+ unsigned long vector;
+ u32 ven_msi;
+
+ if (strict_strtoul(buf, 0, &vector))
+ return -EINVAL;
+
+ if (!config->configured_msi)
+ return -EINVAL;
+
+ if (vector >= config->configured_msi)
+ return -EINVAL;
+
+ ven_msi = readl(&app_reg->ven_msi_1);
+ ven_msi &= ~VEN_MSI_FUN_NUM_MASK;
+ ven_msi |= 0 << VEN_MSI_FUN_NUM_ID;
+ ven_msi &= ~VEN_MSI_TC_MASK;
+ ven_msi |= 0 << VEN_MSI_TC_ID;
+ ven_msi &= ~VEN_MSI_VECTOR_MASK;
+ ven_msi |= vector << VEN_MSI_VECTOR_ID;
+
+ /*generating interrupt for msi vector*/
+ ven_msi |= VEN_MSI_REQ_EN;
+ writel(ven_msi, &app_reg->ven_msi_1);
+ /*need to wait till this bit is cleared, it is not cleared
+ * autometically[Bug RTL] TBD*/
+ udelay(1);
+ ven_msi &= ~VEN_MSI_REQ_EN;
+ writel(ven_msi, &app_reg->ven_msi_1);
+
+ return count;
+}
+
+static DEVICE_ATTR(send_msi, S_IWUSR, NULL, pcie_gadget_store_send_msi);
+
+static ssize_t pcie_gadget_show_vendor_id(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+ u32 id;
+
+ spear_dbi_read_reg(config, PCI_VENDOR_ID, 2, &id);
+
+ return sprintf(buf, "%x", id);
+}
+
+static ssize_t pcie_gadget_store_vendor_id(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+ unsigned long id;
+
+ if (strict_strtoul(buf, 0, &id))
+ return -EINVAL;
+
+ spear_dbi_write_reg(config, PCI_VENDOR_ID, 2, id);
+
+ return count;
+}
+
+static DEVICE_ATTR(vendor_id, S_IWUSR | S_IRUGO, pcie_gadget_show_vendor_id,
+ pcie_gadget_store_vendor_id);
+
+static ssize_t pcie_gadget_show_device_id(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+ u32 id;
+
+ spear_dbi_read_reg(config, PCI_DEVICE_ID, 2, &id);
+
+ return sprintf(buf, "%x", id);
+}
+
+static ssize_t pcie_gadget_store_device_id(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+ unsigned long id;
+
+ if (strict_strtoul(buf, 0, &id))
+ return -EINVAL;
+
+ spear_dbi_write_reg(config, PCI_DEVICE_ID, 2, id);
+
+ return count;
+}
+
+static DEVICE_ATTR(device_id, S_IWUSR | S_IRUGO, pcie_gadget_show_device_id,
+ pcie_gadget_store_device_id);
+
+static ssize_t pcie_gadget_show_bar0_size(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%x", config->bar0_size);
+}
+
+static ssize_t pcie_gadget_store_bar0_size(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+ unsigned long size;
+ u32 pos, pos1;
+ u32 no_of_bit = 0;
+
+ if (strict_strtoul(buf, 0, &size))
+ return -EINVAL;
+ /* as per PCIE specs, min bar size supported is 128 bytes. But
+ * our controller supports min as 256*/
+ if (size <= 0x100)
+ size = 0x100;
+ /* max bar size is 1MB*/
+ else if (size >= 0x100000)
+ size = 0x100000;
+ else {
+ pos = 0;
+ pos1 = 0;
+ while (pos < 21) {
+ pos = find_next_bit((unsigned long *)&size, 21, pos);
+ if (pos != 21)
+ pos1 = pos + 1;
+ pos++;
+ no_of_bit++;
+ }
+ if (no_of_bit == 2)
+ pos1--;
+
+ size = 1 << pos1;
+ }
+ config->bar0_size = size;
+ spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, size - 1);
+
+ return count;
+}
+
+static DEVICE_ATTR(bar0_size, S_IWUSR | S_IRUGO, pcie_gadget_show_bar0_size,
+ pcie_gadget_store_bar0_size);
+
+static ssize_t pcie_gadget_show_bar0_address(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+ struct pcie_app_reg __iomem *app_reg =
+ (struct pcie_app_reg __iomem *)config->va_app_base;
+
+ u32 address = readl(&app_reg->pim0_mem_addr_start);
+
+ return sprintf(buf, "%x", address);
+}
+
+static ssize_t pcie_gadget_store_bar0_address(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+ struct pcie_app_reg __iomem *app_reg =
+ (struct pcie_app_reg __iomem *)config->va_app_base;
+ unsigned long address;
+
+ if (strict_strtoul(buf, 0, &address))
+ return -EINVAL;
+
+ address &= ~(config->bar0_size - 1);
+ if (config->va_bar0_address)
+ iounmap((void *)config->va_bar0_address);
+ config->va_bar0_address = (u32)ioremap(address, config->bar0_size);
+ if (!config->va_bar0_address)
+ return -ENOMEM;
+
+ writel(address, &app_reg->pim0_mem_addr_start);
+
+ return count;
+}
+
+static DEVICE_ATTR(bar0_address, S_IWUSR | S_IRUGO,
+ pcie_gadget_show_bar0_address, pcie_gadget_store_bar0_address);
+
+static ssize_t pcie_gadget_show_bar0_rw_offset(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%x", config->bar0_rw_offset);
+}
+
+static ssize_t pcie_gadget_store_bar0_rw_offset(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+ unsigned long offset;
+
+ if (strict_strtoul(buf, 0, &offset))
+ return -EINVAL;
+
+ if (offset % 4)
+ return -EINVAL;
+
+ config->bar0_rw_offset = offset;
+
+ return count;
+}
+
+static DEVICE_ATTR(bar0_rw_offset, S_IWUSR | S_IRUGO,
+ pcie_gadget_show_bar0_rw_offset, pcie_gadget_store_bar0_rw_offset);
+
+static ssize_t pcie_gadget_show_bar0_data(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+ u32 data;
+
+ if (!config->va_bar0_address)
+ return -ENOMEM;
+
+ data = readl(config->va_bar0_address + config->bar0_rw_offset);
+
+ return sprintf(buf, "%x", data);
+}
+
+static ssize_t pcie_gadget_store_bar0_data(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct spear_pcie_gadget_config *config = dev_get_drvdata(dev);
+ unsigned long data;
+
+ if (strict_strtoul(buf, 0, &data))
+ return -EINVAL;
+
+ if (!config->va_bar0_address)
+ return -ENOMEM;
+
+ writel(data, config->va_bar0_address + config->bar0_rw_offset);
+
+ return count;
+}
+
+static DEVICE_ATTR(bar0_data, S_IWUSR | S_IRUGO,
+ pcie_gadget_show_bar0_data, pcie_gadget_store_bar0_data);
+
+static struct attribute *pcie_gadget_attributes[] = {
+ &dev_attr_link.attr,
+ &dev_attr_int_type.attr,
+ &dev_attr_no_of_msi.attr,
+ &dev_attr_inta.attr,
+ &dev_attr_send_msi.attr,
+ &dev_attr_vendor_id.attr,
+ &dev_attr_device_id.attr,
+ &dev_attr_bar0_size.attr,
+ &dev_attr_bar0_address.attr,
+ &dev_attr_bar0_rw_offset.attr,
+ &dev_attr_bar0_data.attr,
+ NULL
+};
+
+static const struct attribute_group pcie_gadget_attr_group = {
+ .attrs = pcie_gadget_attributes,
+};
+
+static void spear13xx_pcie_device_init(struct spear_pcie_gadget_config *config)
+{
+ struct pcie_app_reg __iomem *app_reg =
+ (struct pcie_app_reg __iomem *)config->va_app_base;
+
+ /*setup registers for outbound translation */
+
+ writel(config->base, &app_reg->in0_mem_addr_start);
+ writel(app_reg->in0_mem_addr_start + IN0_MEM_SIZE,
+ &app_reg->in0_mem_addr_limit);
+ writel(app_reg->in0_mem_addr_limit + 1, &app_reg->in1_mem_addr_start);
+ writel(app_reg->in1_mem_addr_start + IN1_MEM_SIZE,
+ &app_reg->in1_mem_addr_limit);
+ writel(app_reg->in1_mem_addr_limit + 1, &app_reg->in_io_addr_start);
+ writel(app_reg->in_io_addr_start + IN_IO_SIZE,
+ &app_reg->in_io_addr_limit);
+ writel(app_reg->in_io_addr_limit + 1, &app_reg->in_cfg0_addr_start);
+ writel(app_reg->in_cfg0_addr_start + IN_CFG0_SIZE,
+ &app_reg->in_cfg0_addr_limit);
+ writel(app_reg->in_cfg0_addr_limit + 1, &app_reg->in_cfg1_addr_start);
+ writel(app_reg->in_cfg1_addr_start + IN_CFG1_SIZE,
+ &app_reg->in_cfg1_addr_limit);
+ writel(app_reg->in_cfg1_addr_limit + 1, &app_reg->in_msg_addr_start);
+ writel(app_reg->in_msg_addr_start + IN_MSG_SIZE,
+ &app_reg->in_msg_addr_limit);
+
+ writel(app_reg->in0_mem_addr_start, &app_reg->pom0_mem_addr_start);
+ writel(app_reg->in1_mem_addr_start, &app_reg->pom1_mem_addr_start);
+ writel(app_reg->in_io_addr_start, &app_reg->pom_io_addr_start);
+
+ /*setup registers for inbound translation */
+
+ /* Keep AORAM mapped at BAR0 as default */
+ config->bar0_size = INBOUND_ADDR_MASK + 1;
+ spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, INBOUND_ADDR_MASK);
+ spear_dbi_write_reg(config, PCI_BASE_ADDRESS_0, 4, 0xC);
+ config->va_bar0_address = (u32)ioremap(SPEAR13XX_SYSRAM1_BASE,
+ config->bar0_size);
+
+ writel(SPEAR13XX_SYSRAM1_BASE, &app_reg->pim0_mem_addr_start);
+ writel(0, &app_reg->pim1_mem_addr_start);
+ writel(INBOUND_ADDR_MASK + 1, &app_reg->mem0_addr_offset_limit);
+
+ writel(0x0, &app_reg->pim_io_addr_start);
+ writel(0x0, &app_reg->pim_io_addr_start);
+ writel(0x0, &app_reg->pim_rom_addr_start);
+
+ writel(DEVICE_TYPE_EP | (1 << MISCTRL_EN_ID)
+ | ((u32)1 << REG_TRANSLATION_ENABLE),
+ &app_reg->app_ctrl_0);
+ /* disable all rx interrupts */
+ writel(0, &app_reg->int_mask);
+
+ /* Select INTA as default*/
+ spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
+}
+
+static int __devinit spear_pcie_gadget_probe(struct platform_device *pdev)
+{
+ struct resource *res0, *res1;
+ struct spear_pcie_gadget_config *config;
+ unsigned int status = 0;
+ int irq;
+ struct clk *clk;
+
+ /* get resource for application registers*/
+
+ res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res0) {
+ dev_err(&pdev->dev, "no resource defined\n");
+ return -EBUSY;
+ }
+ if (!request_mem_region(res0->start, resource_size(res0),
+ pdev->name)) {
+ dev_err(&pdev->dev, "pcie gadget region already claimed\n");
+ return -EBUSY;
+ }
+ /* get resource for dbi registers*/
+
+ res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res1) {
+ dev_err(&pdev->dev, "no resource defined\n");
+ goto err_rel_res0;
+ }
+ if (!request_mem_region(res1->start, resource_size(res1),
+ pdev->name)) {
+ dev_err(&pdev->dev, "pcie gadget region already claimed\n");
+ goto err_rel_res0;
+ }
+
+ config = kzalloc(sizeof(*config), GFP_KERNEL);
+ if (!config) {
+ dev_err(&pdev->dev, "out of memory\n");
+ status = -ENOMEM;
+ goto err_rel_res;
+ }
+
+ config->va_app_base = (void __iomem *)ioremap(res0->start,
+ resource_size(res0));
+ if (!config->va_app_base) {
+ dev_err(&pdev->dev, "ioremap fail\n");
+ status = -ENOMEM;
+ goto err_kzalloc;
+ }
+
+ config->base = (void __iomem *)res1->start;
+
+ config->va_dbi_base = (void __iomem *)ioremap(res1->start,
+ resource_size(res1));
+ if (!config->va_dbi_base) {
+ dev_err(&pdev->dev, "ioremap fail\n");
+ status = -ENOMEM;
+ goto err_iounmap_app;
+ }
+
+ dev_set_drvdata(&pdev->dev, config);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no update irq?\n");
+ status = irq;
+ goto err_iounmap;
+ }
+
+ status = request_irq(irq, spear_pcie_gadget_irq, 0, pdev->name, NULL);
+ if (status) {
+ dev_err(&pdev->dev, "pcie gadget interrupt IRQ%d already \
+ claimed\n", irq);
+ goto err_get_irq;
+ }
+ /* Register sysfs hooks */
+ status = sysfs_create_group(&pdev->dev.kobj, &pcie_gadget_attr_group);
+ if (status)
+ goto err_irq;
+
+ /* init basic pcie application registers*/
+ /* do not enable clock if it is PCIE0.Ideally , all controller should
+ * have been independent from others with respect to clock. But PCIE1
+ * and 2 depends on PCIE0.So PCIE0 clk is provided during board init.*/
+ if (pdev->id == 1) {
+ /* Ideally CFG Clock should have been also enabled here. But
+ * it is done currently during board init routne*/
+ clk = clk_get_sys("pcie1", NULL);
+ if (!clk) {
+ pr_err("%s:couldn't get clk for pcie1\n", __func__);
+ goto err_irq;
+ }
+ if (clk_enable(clk)) {
+ pr_err("%s:couldn't enable clk for pcie1\n", __func__);
+ goto err_irq;
+ }
+ } else if (pdev->id == 2) {
+ /* Ideally CFG Clock should have been also enabled here. But
+ * it is done currently during board init routne*/
+ clk = clk_get_sys("pcie2", NULL);
+ if (!clk) {
+ pr_err("%s:couldn't get clk for pcie2\n", __func__);
+ goto err_irq;
+ }
+ if (clk_enable(clk)) {
+ pr_err("%s:couldn't enable clk for pcie2\n", __func__);
+ goto err_irq;
+ }
+ }
+ spear13xx_pcie_device_init(config);
+
+ return 0;
+err_irq:
+ free_irq(irq, NULL);
+err_get_irq:
+ dev_set_drvdata(&pdev->dev, NULL);
+err_iounmap:
+ iounmap(config->va_dbi_base);
+err_iounmap_app:
+ iounmap(config->va_app_base);
+err_kzalloc:
+ kfree(config);
+err_rel_res:
+ release_mem_region(res1->start, resource_size(res1));
+err_rel_res0:
+ release_mem_region(res0->start, resource_size(res0));
+ return status;
+}
+
+static int __devexit spear_pcie_gadget_remove(struct platform_device *pdev)
+{
+ struct resource *res0, *res1;
+ struct spear_pcie_gadget_config *config;
+ int irq;
+
+ res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ irq = platform_get_irq(pdev, 0);
+ config = dev_get_drvdata(&pdev->dev);
+
+ free_irq(irq, NULL);
+ dev_set_drvdata(&pdev->dev, NULL);
+ iounmap(config->va_dbi_base);
+ iounmap(config->va_app_base);
+ kfree(config);
+ release_mem_region(res1->start, resource_size(res1));
+ release_mem_region(res0->start, resource_size(res0));
+ sysfs_remove_group(&pdev->dev.kobj, &pcie_gadget_attr_group);
+
+ return 0;
+}
+
+static void spear_pcie_gadget_shutdown(struct platform_device *pdev)
+{
+}
+
+static struct platform_driver spear_pcie_gadget_driver = {
+ .probe = spear_pcie_gadget_probe,
+ .remove = spear_pcie_gadget_remove,
+ .shutdown = spear_pcie_gadget_shutdown,
+ .driver = {
+ .name = "pcie-gadget-spear",
+ .bus = &platform_bus_type
+ },
+};
+
+static int __init spear_pcie_gadget_init(void)
+{
+ return platform_driver_register(&spear_pcie_gadget_driver);
+}
+module_init(spear_pcie_gadget_init);
+
+static void __exit spear_pcie_gadget_exit(void)
+{
+ platform_driver_unregister(&spear_pcie_gadget_driver);
+}
+module_exit(spear_pcie_gadget_exit);
+
+MODULE_ALIAS("pcie-gadget-spear");
+MODULE_AUTHOR("Pratyush Anand");
+MODULE_LICENSE("GPL");
--
1.7.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists