| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1294352605-31906-4-git-send-email-gregkh@suse.de>
Date: Thu, 6 Jan 2011 14:22:53 -0800
From: Greg Kroah-Hartman <gregkh@...e.de>
To: linux-kernel@...r.kernel.org
Cc: Alan Cox <alan@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...e.de>
Subject: [PATCH 04/36] n_gsm: clean up printks
From: Alan Cox <alan@...ux.intel.com>
[Original From Ken Mills but I redid it using pr_ helpers instead]
Also fix up coding style, there are two warnings left but that is where
the CodingStyle tools blow up because they cannot handle
if (blah) {
foo
} else switch (x) {
case 1:
}
Signed-off-by: Alan Cox <alan@...ux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...e.de>
---
drivers/tty/n_gsm.c | 154 +++++++++++++++++++++++++++------------------------
1 files changed, 81 insertions(+), 73 deletions(-)
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 5256087..11a25fa 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -19,7 +19,7 @@
*
* TO DO:
* Mostly done: ioctls for setting modes/timing
- * Partly done: hooks so you can pull off frames to non tty devs
+ * Partly done: hooks so you can pull off frames to non tty devs
* Restart DLCI 0 when it closes ?
* Test basic encoding
* Improve the tx engine
@@ -73,8 +73,10 @@ module_param(debug, int, 0600);
#define T2 (2 * HZ)
#endif
-/* Semi-arbitary buffer size limits. 0710 is normally run with 32-64 byte
- limits so this is plenty */
+/*
+ * Semi-arbitary buffer size limits. 0710 is normally run with 32-64 byte
+ * limits so this is plenty
+ */
#define MAX_MRU 512
#define MAX_MTU 512
@@ -290,7 +292,7 @@ static spinlock_t gsm_mux_lock;
#define MDM_DV 0x40
#define GSM0_SOF 0xF9
-#define GSM1_SOF 0x7E
+#define GSM1_SOF 0x7E
#define GSM1_ESCAPE 0x7D
#define GSM1_ESCAPE_BITS 0x20
#define XON 0x11
@@ -433,61 +435,63 @@ static void gsm_print_packet(const char *hdr, int addr, int cr,
if (!(debug & 1))
return;
- printk(KERN_INFO "%s %d) %c: ", hdr, addr, "RC"[cr]);
+ pr_info("%s %d) %c: ", hdr, addr, "RC"[cr]);
switch (control & ~PF) {
case SABM:
- printk(KERN_CONT "SABM");
+ pr_cont("SABM");
break;
case UA:
- printk(KERN_CONT "UA");
+ pr_cont("UA");
break;
case DISC:
- printk(KERN_CONT "DISC");
+ pr_cont("DISC");
break;
case DM:
- printk(KERN_CONT "DM");
+ pr_cont("DM");
break;
case UI:
- printk(KERN_CONT "UI");
+ pr_cont("UI");
break;
case UIH:
- printk(KERN_CONT "UIH");
+ pr_cont("UIH");
break;
default:
if (!(control & 0x01)) {
- printk(KERN_CONT "I N(S)%d N(R)%d",
- (control & 0x0E) >> 1, (control & 0xE)>> 5);
+ pr_cont("I N(S)%d N(R)%d",
+ (control & 0x0E) >> 1, (control & 0xE) >> 5);
} else switch (control & 0x0F) {
- case RR:
- printk("RR(%d)", (control & 0xE0) >> 5);
- break;
- case RNR:
- printk("RNR(%d)", (control & 0xE0) >> 5);
- break;
- case REJ:
- printk("REJ(%d)", (control & 0xE0) >> 5);
- break;
- default:
- printk(KERN_CONT "[%02X]", control);
+ case RR:
+ pr_cont("RR(%d)", (control & 0xE0) >> 5);
+ break;
+ case RNR:
+ pr_cont("RNR(%d)", (control & 0xE0) >> 5);
+ break;
+ case REJ:
+ pr_cont("REJ(%d)", (control & 0xE0) >> 5);
+ break;
+ default:
+ pr_cont("[%02X]", control);
}
}
if (control & PF)
- printk(KERN_CONT "(P)");
+ pr_cont("(P)");
else
- printk(KERN_CONT "(F)");
+ pr_cont("(F)");
if (dlen) {
int ct = 0;
while (dlen--) {
- if (ct % 8 == 0)
- printk(KERN_CONT "\n ");
- printk(KERN_CONT "%02X ", *data++);
+ if (ct % 8 == 0) {
+ pr_cont("\n");
+ pr_debug(" ");
+ }
+ pr_cont("%02X ", *data++);
ct++;
}
}
- printk(KERN_CONT "\n");
+ pr_cont("\n");
}
@@ -526,11 +530,13 @@ static void hex_packet(const unsigned char *p, int len)
{
int i;
for (i = 0; i < len; i++) {
- if (i && (i % 16) == 0)
- printk("\n");
- printk("%02X ", *p++);
+ if (i && (i % 16) == 0) {
+ pr_cont("\n");
+ pr_debug("");
+ }
+ pr_cont("%02X ", *p++);
}
- printk("\n");
+ pr_cont("\n");
}
/**
@@ -680,7 +686,7 @@ static void gsm_data_kick(struct gsm_mux *gsm)
}
if (debug & 4) {
- printk("gsm_data_kick: \n");
+ pr_debug("gsm_data_kick:\n");
hex_packet(gsm->txframe, len);
}
@@ -1233,7 +1239,7 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
}
/**
- * gsm_control_transmit - send control packet
+ * gsm_control_transmit - send control packet
* @gsm: gsm mux
* @ctrl: frame to send
*
@@ -1363,7 +1369,7 @@ static void gsm_dlci_close(struct gsm_dlci *dlci)
{
del_timer(&dlci->t1);
if (debug & 8)
- printk("DLCI %d goes closed.\n", dlci->addr);
+ pr_debug("DLCI %d goes closed.\n", dlci->addr);
dlci->state = DLCI_CLOSED;
if (dlci->addr != 0) {
struct tty_struct *tty = tty_port_tty_get(&dlci->port);
@@ -1394,7 +1400,7 @@ static void gsm_dlci_open(struct gsm_dlci *dlci)
/* This will let a tty open continue */
dlci->state = DLCI_OPEN;
if (debug & 8)
- printk("DLCI %d goes open.\n", dlci->addr);
+ pr_debug("DLCI %d goes open.\n", dlci->addr);
wake_up(&dlci->gsm->event);
}
@@ -1496,29 +1502,29 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int len)
unsigned int modem = 0;
if (debug & 16)
- printk("%d bytes for tty %p\n", len, tty);
+ pr_debug("%d bytes for tty %p\n", len, tty);
if (tty) {
switch (dlci->adaption) {
- /* Unsupported types */
- /* Packetised interruptible data */
- case 4:
- break;
- /* Packetised uininterruptible voice/data */
- case 3:
- break;
- /* Asynchronous serial with line state in each frame */
- case 2:
- while (gsm_read_ea(&modem, *data++) == 0) {
- len--;
- if (len == 0)
- return;
- }
- gsm_process_modem(tty, dlci, modem);
- /* Line state will go via DLCI 0 controls only */
- case 1:
- default:
- tty_insert_flip_string(tty, data, len);
- tty_flip_buffer_push(tty);
+ /* Unsupported types */
+ /* Packetised interruptible data */
+ case 4:
+ break;
+ /* Packetised uininterruptible voice/data */
+ case 3:
+ break;
+ /* Asynchronous serial with line state in each frame */
+ case 2:
+ while (gsm_read_ea(&modem, *data++) == 0) {
+ len--;
+ if (len == 0)
+ return;
+ }
+ gsm_process_modem(tty, dlci, modem);
+ /* Line state will go via DLCI 0 controls only */
+ case 1:
+ default:
+ tty_insert_flip_string(tty, data, len);
+ tty_flip_buffer_push(tty);
}
tty_kref_put(tty);
}
@@ -1656,7 +1662,7 @@ static void gsm_queue(struct gsm_mux *gsm)
if (gsm->fcs != GOOD_FCS) {
gsm->bad_fcs++;
if (debug & 4)
- printk("BAD FCS %02x\n", gsm->fcs);
+ pr_debug("BAD FCS %02x\n", gsm->fcs);
return;
}
address = gsm->address >> 1;
@@ -1890,7 +1896,7 @@ static void gsm1_receive(struct gsm_mux *gsm, unsigned char c)
gsm->state = GSM_DATA;
break;
case GSM_DATA: /* Data */
- if (gsm->count > gsm->mru ) { /* Allow one for the FCS */
+ if (gsm->count > gsm->mru) { /* Allow one for the FCS */
gsm->state = GSM_OVERRUN;
gsm->bad_size++;
} else
@@ -2085,7 +2091,7 @@ static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len)
return -ENOSPC;
}
if (debug & 4) {
- printk("-->%d bytes out\n", len);
+ pr_debug("-->%d bytes out\n", len);
hex_packet(data, len);
}
gsm->tty->ops->write(gsm->tty, data, len);
@@ -2142,7 +2148,7 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp,
char flags;
if (debug & 4) {
- printk("Inbytes %dd\n", count);
+ pr_debug("Inbytes %dd\n", count);
hex_packet(cp, count);
}
@@ -2159,7 +2165,7 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp,
gsm->error(gsm, *dp, flags);
break;
default:
- printk(KERN_ERR "%s: unknown flag %d\n",
+ WARN_ONCE("%s: unknown flag %d\n",
tty_name(tty, buf), flags);
break;
}
@@ -2354,7 +2360,7 @@ static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm,
int need_restart = 0;
/* Stuff we don't support yet - UI or I frame transport, windowing */
- if ((c->adaption !=1 && c->adaption != 2) || c->k)
+ if ((c->adaption != 1 && c->adaption != 2) || c->k)
return -EOPNOTSUPP;
/* Check the MRU/MTU range looks sane */
if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8)
@@ -2448,7 +2454,7 @@ static int gsmld_ioctl(struct tty_struct *tty, struct file *file,
c.i = 1;
else
c.i = 2;
- printk("Ftype %d i %d\n", gsm->ftype, c.i);
+ pr_debug("Ftype %d i %d\n", gsm->ftype, c.i);
c.mru = gsm->mru;
c.mtu = gsm->mtu;
c.k = 0;
@@ -2742,14 +2748,15 @@ static int __init gsm_init(void)
/* Fill in our line protocol discipline, and register it */
int status = tty_register_ldisc(N_GSM0710, &tty_ldisc_packet);
if (status != 0) {
- printk(KERN_ERR "n_gsm: can't register line discipline (err = %d)\n", status);
+ pr_err("n_gsm: can't register line discipline (err = %d)\n",
+ status);
return status;
}
gsm_tty_driver = alloc_tty_driver(256);
if (!gsm_tty_driver) {
tty_unregister_ldisc(N_GSM0710);
- printk(KERN_ERR "gsm_init: tty allocation failed.\n");
+ pr_err("gsm_init: tty allocation failed.\n");
return -EINVAL;
}
gsm_tty_driver->owner = THIS_MODULE;
@@ -2760,7 +2767,7 @@ static int __init gsm_init(void)
gsm_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
gsm_tty_driver->subtype = SERIAL_TYPE_NORMAL;
gsm_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV
- | TTY_DRIVER_HARDWARE_BREAK;
+ | TTY_DRIVER_HARDWARE_BREAK;
gsm_tty_driver->init_termios = tty_std_termios;
/* Fixme */
gsm_tty_driver->init_termios.c_lflag &= ~ECHO;
@@ -2771,10 +2778,11 @@ static int __init gsm_init(void)
if (tty_register_driver(gsm_tty_driver)) {
put_tty_driver(gsm_tty_driver);
tty_unregister_ldisc(N_GSM0710);
- printk(KERN_ERR "gsm_init: tty registration failed.\n");
+ pr_err("gsm_init: tty registration failed.\n");
return -EBUSY;
}
- printk(KERN_INFO "gsm_init: loaded as %d,%d.\n", gsm_tty_driver->major, gsm_tty_driver->minor_start);
+ pr_debug("gsm_init: loaded as %d,%d.\n",
+ gsm_tty_driver->major, gsm_tty_driver->minor_start);
return 0;
}
@@ -2782,10 +2790,10 @@ static void __exit gsm_exit(void)
{
int status = tty_unregister_ldisc(N_GSM0710);
if (status != 0)
- printk(KERN_ERR "n_gsm: can't unregister line discipline (err = %d)\n", status);
+ pr_err("n_gsm: can't unregister line discipline (err = %d)\n",
+ status);
tty_unregister_driver(gsm_tty_driver);
put_tty_driver(gsm_tty_driver);
- printk(KERN_INFO "gsm_init: unloaded.\n");
}
module_init(gsm_init);
--
1.7.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists