| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20110106002306.397303678@clark.site>
Date: Wed, 05 Jan 2011 16:23:20 -0800
From: Greg KH <gregkh@...e.de>
To: linux-kernel@...r.kernel.org, stable@...nel.org
Cc: stable-review@...nel.org, torvalds@...ux-foundation.org,
akpm@...ux-foundation.org, alan@...rguk.ukuu.org.uk,
Ivo van Doorn <IvDoorn@...il.com>,
Helmut Schaa <helmut.schaa@...glemail.com>,
"John W. Linville" <linville@...driver.com>
Subject: [101/152] rt2x00: Fix max TX power settings
2.6.36-stable review patch. If anyone has any objections, please let us know.
------------------
From: Ivo van Doorn <ivdoorn@...il.com>
commit 8d1331b37d5b656a7a8e561f8e9d7661dd00c910 upstream.
During initialization each driver reads the default TX power
for each individual channel. However mac80211 only accepts the
maximum value (which is also handled as default value).
As a result, the TX power of the device was being limited to
the default value, which is often quite low compared to the
real maximum acceptable value.
This patch allows each driver to set the maximum value on a
per-channel basis which is forwarded to mac80211. The default
value will be preserved for now, in case we want to update
mac80211 to differentiate between the maximum and default txpower.
This fixes bug complaining about limited TX power values like:
https://bugzilla.kernel.org/show_bug.cgi?id=16358
Signed-off-by: Ivo van Doorn <IvDoorn@...il.com>
Acked-by: Helmut Schaa <helmut.schaa@...glemail.com>
Signed-off-by: John W. Linville <linville@...driver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...e.de>
---
drivers/net/wireless/rt2x00/rt2400pci.c | 6 ++-
drivers/net/wireless/rt2x00/rt2500pci.c | 12 ++++--
drivers/net/wireless/rt2x00/rt2500usb.c | 12 ++++--
drivers/net/wireless/rt2x00/rt2800.h | 7 +++
drivers/net/wireless/rt2x00/rt2800lib.c | 59 ++++++++++++++++++--------------
drivers/net/wireless/rt2x00/rt2x00.h | 5 +-
drivers/net/wireless/rt2x00/rt2x00dev.c | 2 -
drivers/net/wireless/rt2x00/rt61pci.c | 12 ++++--
drivers/net/wireless/rt2x00/rt73usb.c | 12 ++++--
9 files changed, 82 insertions(+), 45 deletions(-)
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1488,8 +1488,10 @@ static int rt2400pci_probe_hw_mode(struc
spec->channels_info = info;
tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
- for (i = 0; i < 14; i++)
- info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+ for (i = 0; i < 14; i++) {
+ info[i].max_power = TXPOWER_FROM_DEV(MAX_TXPOWER);
+ info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+ }
return 0;
}
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1802,12 +1802,16 @@ static int rt2500pci_probe_hw_mode(struc
spec->channels_info = info;
tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
- for (i = 0; i < 14; i++)
- info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+ for (i = 0; i < 14; i++) {
+ info[i].max_power = MAX_TXPOWER;
+ info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+ }
if (spec->num_channels > 14) {
- for (i = 14; i < spec->num_channels; i++)
- info[i].tx_power1 = DEFAULT_TXPOWER;
+ for (i = 14; i < spec->num_channels; i++) {
+ info[i].max_power = MAX_TXPOWER;
+ info[i].default_power1 = DEFAULT_TXPOWER;
+ }
}
return 0;
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1705,12 +1705,16 @@ static int rt2500usb_probe_hw_mode(struc
spec->channels_info = info;
tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
- for (i = 0; i < 14; i++)
- info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+ for (i = 0; i < 14; i++) {
+ info[i].max_power = MAX_TXPOWER;
+ info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+ }
if (spec->num_channels > 14) {
- for (i = 14; i < spec->num_channels; i++)
- info[i].tx_power1 = DEFAULT_TXPOWER;
+ for (i = 14; i < spec->num_channels; i++) {
+ info[i].max_power = MAX_TXPOWER;
+ info[i].default_power1 = DEFAULT_TXPOWER;
+ }
}
return 0;
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -1841,6 +1841,13 @@ struct mac_iveiv_entry {
#define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00)
/*
+ * EEPROM Maximum TX power values
+ */
+#define EEPROM_MAX_TX_POWER 0x0027
+#define EEPROM_MAX_TX_POWER_24GHZ FIELD16(0x00ff)
+#define EEPROM_MAX_TX_POWER_5GHZ FIELD16(0xff00)
+
+/*
* EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
* This is delta in 40MHZ.
* VALUE: Tx Power dalta value (MAX=4)
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1120,27 +1120,27 @@ static void rt2800_config_channel_rf2xxx
* double meaning, and we should set a 7DBm boost flag.
*/
rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
- (info->tx_power1 >= 0));
+ (info->default_power1 >= 0));
- if (info->tx_power1 < 0)
- info->tx_power1 += 7;
+ if (info->default_power1 < 0)
+ info->default_power1 += 7;
rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
- TXPOWER_A_TO_DEV(info->tx_power1));
+ TXPOWER_A_TO_DEV(info->default_power1));
rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
- (info->tx_power2 >= 0));
+ (info->default_power2 >= 0));
- if (info->tx_power2 < 0)
- info->tx_power2 += 7;
+ if (info->default_power2 < 0)
+ info->default_power2 += 7;
rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
- TXPOWER_A_TO_DEV(info->tx_power2));
+ TXPOWER_A_TO_DEV(info->default_power2));
} else {
rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
- TXPOWER_G_TO_DEV(info->tx_power1));
+ TXPOWER_G_TO_DEV(info->default_power1));
rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
- TXPOWER_G_TO_DEV(info->tx_power2));
+ TXPOWER_G_TO_DEV(info->default_power2));
}
rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
@@ -1180,13 +1180,11 @@ static void rt2800_config_channel_rf3xxx
rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr);
- rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
- TXPOWER_G_TO_DEV(info->tx_power1));
+ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, info->default_power1);
rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
rt2800_rfcsr_read(rt2x00dev, 13, &rfcsr);
- rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER,
- TXPOWER_G_TO_DEV(info->tx_power2));
+ rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, info->default_power2);
rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
@@ -2516,6 +2514,13 @@ int rt2800_validate_eeprom(struct rt2x00
default_lna_gain);
rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_MAX_TX_POWER, &word);
+ if (rt2x00_get_field16(word, EEPROM_MAX_TX_POWER_24GHZ) == 0xff)
+ rt2x00_set_field16(&word, EEPROM_MAX_TX_POWER_24GHZ, MAX_G_TXPOWER);
+ if (rt2x00_get_field16(word, EEPROM_MAX_TX_POWER_5GHZ) == 0xff)
+ rt2x00_set_field16(&word, EEPROM_MAX_TX_POWER_5GHZ, MAX_A_TXPOWER);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_MAX_TX_POWER, word);
+
return 0;
}
EXPORT_SYMBOL_GPL(rt2800_validate_eeprom);
@@ -2755,9 +2760,10 @@ int rt2800_probe_hw_mode(struct rt2x00_d
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
struct channel_info *info;
- char *tx_power1;
- char *tx_power2;
+ char *default_power1;
+ char *default_power2;
unsigned int i;
+ unsigned short max_power;
u16 eeprom;
/*
@@ -2871,21 +2877,26 @@ int rt2800_probe_hw_mode(struct rt2x00_d
spec->channels_info = info;
- tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
- tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_MAX_TX_POWER, &eeprom);
+ max_power = rt2x00_get_field16(eeprom, EEPROM_MAX_TX_POWER_24GHZ);
+ default_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
+ default_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
for (i = 0; i < 14; i++) {
- info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]);
- info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]);
+ info[i].max_power = max_power;
+ info[i].default_power1 = TXPOWER_G_FROM_DEV(default_power1[i]);
+ info[i].default_power2 = TXPOWER_G_FROM_DEV(default_power2[i]);
}
if (spec->num_channels > 14) {
- tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1);
- tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
+ max_power = rt2x00_get_field16(eeprom, EEPROM_MAX_TX_POWER_5GHZ);
+ default_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1);
+ default_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
for (i = 14; i < spec->num_channels; i++) {
- info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]);
- info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]);
+ info[i].max_power = max_power;
+ info[i].default_power1 = TXPOWER_A_FROM_DEV(default_power1[i]);
+ info[i].default_power2 = TXPOWER_A_FROM_DEV(default_power2[i]);
}
}
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -212,8 +212,9 @@ struct channel_info {
unsigned int flags;
#define GEOGRAPHY_ALLOWED 0x00000001
- short tx_power1;
- short tx_power2;
+ short max_power;
+ short default_power1;
+ short default_power2;
};
/*
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -710,7 +710,7 @@ static int rt2x00lib_probe_hw_modes(stru
for (i = 0; i < spec->num_channels; i++) {
rt2x00lib_channel(&channels[i],
spec->channels[i].channel,
- spec->channels_info[i].tx_power1, i);
+ spec->channels_info[i].max_power, i);
}
/*
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2661,13 +2661,17 @@ static int rt61pci_probe_hw_mode(struct
spec->channels_info = info;
tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
- for (i = 0; i < 14; i++)
- info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+ for (i = 0; i < 14; i++) {
+ info[i].max_power = MAX_TXPOWER;
+ info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+ }
if (spec->num_channels > 14) {
tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
- for (i = 14; i < spec->num_channels; i++)
- info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+ for (i = 14; i < spec->num_channels; i++) {
+ info[i].max_power = MAX_TXPOWER;
+ info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+ }
}
return 0;
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2091,13 +2091,17 @@ static int rt73usb_probe_hw_mode(struct
spec->channels_info = info;
tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
- for (i = 0; i < 14; i++)
- info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+ for (i = 0; i < 14; i++) {
+ info[i].max_power = MAX_TXPOWER;
+ info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+ }
if (spec->num_channels > 14) {
tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
- for (i = 14; i < spec->num_channels; i++)
- info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+ for (i = 14; i < spec->num_channels; i++) {
+ info[i].max_power = MAX_TXPOWER;
+ info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+ }
}
return 0;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists