[ 0.000000] Linux version 2.6.36 (twb@dali) (gcc version 4.5.1 (Debian 4.5.1-7) ) #1 SMP Sat Oct 23 16:33:41 EST 2010 [ 0.000000] Command line: BOOT_IMAGE=vmlinuz.ricer~ [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f690000 (usable) [ 0.000000] BIOS-e820: 000000003f690000 - 000000003f69e000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f69e000 - 000000003f6e0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f6e0000 - 000000003f700000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3f690 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask 0C0000000 write-back [ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable [ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000003f690000 [ 0.000000] 0000000000 - 003f600000 page 2M [ 0.000000] 003f600000 - 003f690000 page 4k [ 0.000000] kernel direct mapping tables up to 3f690000 @ 16000-19000 [ 0.000000] ACPI: RSDP 00000000000fbf40 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 000000003f690100 0006C (v01 _ASUS_ Notebook 03001004 MSFT 00000097) [ 0.000000] ACPI: FACP 000000003f690290 000F4 (v04 A_M_I_ OEMFACP 03001004 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000003f690490 08C4F (v02 A1414 A1414000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 000000003f69e000 00040 [ 0.000000] ACPI: APIC 000000003f690390 0005C (v02 A_M_I_ OEMAPIC 03001004 MSFT 00000097) [ 0.000000] ACPI: MCFG 000000003f6903f0 0003C (v01 A_M_I_ OEMMCFG 03001004 MSFT 00000097) [ 0.000000] ACPI: ECDT 000000003f690430 00055 (v01 A_M_I_ OEMECDT 03001004 MSFT 00000097) [ 0.000000] ACPI: OEMB 000000003f69e040 00061 (v01 A_M_I_ AMI_OEM 03001004 MSFT 00000097) [ 0.000000] ACPI: HPET 000000003f6990e0 00038 (v01 A_M_I_ OEMHPET 03001004 MSFT 00000097) [ 0.000000] ACPI: GSCI 000000003f69e0b0 02024 (v01 A_M_I_ GMCHSCI 03001004 MSFT 00000097) [ 0.000000] ACPI: SSDT 000000003f6a0c80 004F0 (v01 PmRef CpuPm 00003000 INTL 20060113) [ 0.000000] ACPI: SLIC 000000003f699120 00176 (v01 _ASUS_ Notebook 03001004 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880001e00000-ffff880002bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f690 [ 0.000000] On node 0 totalpages: 259615 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3927 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3495 pages used for memmap [ 0.000000] DMA32 zone: 252137 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000 [ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3f700000 (gap: 3f700000:bf700000) [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880001600000 s78016 r8192 d24384 u1048576 [ 0.000000] pcpu-alloc: s78016 r8192 d24384 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] early_res array is doubled to 64 at [17000 - 177ff] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256064 [ 0.000000] Kernel command line: root=/dev/sda2 acpi_osi=Linux ro quiet BOOT_IMAGE=vmlinuz.ricer~ [ 0.000000] ACPI: Added _OSI(Linux) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Subtract (33 early reservations) [ 0.000000] #1 [0001000000 - 0001538c44] TEXT DATA BSS [ 0.000000] #2 [000009fc00 - 0000100000] BIOS reserved [ 0.000000] #3 [0001539000 - 0001539287] BRK [ 0.000000] #4 [0000010000 - 0000012000] TRAMPOLINE [ 0.000000] #5 [0000012000 - 0000016000] ACPI WAKEUP [ 0.000000] #6 [0000016000 - 0000017000] PGTABLE [ 0.000000] #7 [00015392c0 - 000153a2c0] BOOTMEM [ 0.000000] #8 [0001538c80 - 0001538d40] BOOTMEM [ 0.000000] #9 [0001d3b000 - 0001d3c000] BOOTMEM [ 0.000000] #10 [0001d3c000 - 0001d3d000] BOOTMEM [ 0.000000] #11 [0001e00000 - 0002c00000] MEMMAP 0 [ 0.000000] #12 [000153a2c0 - 00015522c0] BOOTMEM [ 0.000000] #13 [00015522c0 - 000156a2c0] BOOTMEM [ 0.000000] #14 [000156b000 - 000156c000] BOOTMEM [ 0.000000] #15 [0001538d40 - 0001538d81] BOOTMEM [ 0.000000] #16 [0001538dc0 - 0001538e03] BOOTMEM [ 0.000000] #17 [000156a2c0 - 000156a4f0] BOOTMEM [ 0.000000] #18 [0001538e40 - 0001538e60] BOOTMEM [ 0.000000] #19 [0001538e80 - 0001538ec3] BOOTMEM [ 0.000000] #20 [0001538f00 - 0001538f43] BOOTMEM [ 0.000000] #21 [0001600000 - 000161b000] BOOTMEM [ 0.000000] #22 [0001700000 - 000171b000] BOOTMEM [ 0.000000] #23 [0001538f80 - 0001538f88] BOOTMEM [ 0.000000] #24 [0001538fc0 - 0001538fc8] BOOTMEM [ 0.000000] #25 [000156a500 - 000156a508] BOOTMEM [ 0.000000] #26 [000156a540 - 000156a550] BOOTMEM [ 0.000000] #27 [000156a580 - 000156a6c0] BOOTMEM [ 0.000000] #28 [000156a6c0 - 000156a720] BOOTMEM [ 0.000000] #29 [000156a740 - 000156a7a0] BOOTMEM [ 0.000000] #30 [000156c000 - 0001574000] BOOTMEM [ 0.000000] #31 [000171b000 - 000181b000] BOOTMEM [ 0.000000] #32 [0001574000 - 00015f4000] BOOTMEM [ 0.000000] Memory: 1016752k/1038912k available (3331k kernel code, 452k absent, 21708k reserved, 1329k data, 364k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:512 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1666.451 MHz processor. [ 0.010011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3332.90 BogoMIPS (lpj=16664510) [ 0.010021] pid_max: default: 32768 minimum: 301 [ 0.010069] Mount-cache hash table entries: 256 [ 0.010279] CPU: Physical Processor ID: 0 [ 0.010284] CPU: Processor Core ID: 0 [ 0.010288] mce: CPU supports 5 MCE banks [ 0.010299] CPU0: Thermal monitoring enabled (TM2) [ 0.010304] using mwait in idle threads. [ 0.010308] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver. [ 0.010319] ... version: 3 [ 0.010322] ... bit width: 40 [ 0.010325] ... generic registers: 2 [ 0.010328] ... value mask: 000000ffffffffff [ 0.010332] ... max period: 000000007fffffff [ 0.010335] ... fixed-purpose events: 3 [ 0.010338] ... event mask: 0000000700000003 [ 0.010382] ACPI: Core revision 20100702 [ 0.030083] Setting APIC routing to flat [ 0.030437] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.131421] CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a [ 0.140000] Booting Node 0, Processors #1 Ok. [ 0.300027] Brought up 2 CPUs [ 0.300036] Total of 2 processors activated (6665.81 BogoMIPS). [ 0.303320] regulator: core version 0.5 [ 0.303320] NET: Registered protocol family 16 [ 0.303320] ACPI: bus type pci registered [ 0.303320] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.303320] PCI: not using MMCONFIG [ 0.303320] PCI: Using configuration type 1 for base access [ 0.303320] bio: create slab at 0 [ 0.303320] ACPI: EC: EC description table is found, configuring boot EC [ 0.310832] ACPI: Executed 1 blocks of module-level executable AML code [ 0.331440] ACPI: SSDT 000000003f6a0190 00326 (v01 PmRef Cpu0Ist 00003000 INTL 20060113) [ 0.332184] ACPI: Dynamic OEM Table Load: [ 0.332191] ACPI: SSDT (null) 00326 (v01 PmRef Cpu0Ist 00003000 INTL 20060113) [ 0.332695] ACPI: SSDT 000000003f6a0550 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20060113) [ 0.333336] ACPI: Dynamic OEM Table Load: [ 0.333342] ACPI: SSDT (null) 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20060113) [ 0.334003] ACPI: SSDT 000000003f6a00e0 000AB (v01 PmRef Cpu1Ist 00003000 INTL 20060113) [ 0.334668] ACPI: Dynamic OEM Table Load: [ 0.334675] ACPI: SSDT (null) 000AB (v01 PmRef Cpu1Ist 00003000 INTL 20060113) [ 0.334931] ACPI: SSDT 000000003f6a04c0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060113) [ 0.335580] ACPI: Dynamic OEM Table Load: [ 0.335586] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060113) [ 0.336008] ACPI: Interpreter enabled [ 0.336015] ACPI: (supports S0 S3 S4 S5) [ 0.336062] ACPI: Using IOAPIC for interrupt routing [ 0.336133] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.337422] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.380940] ACPI: BIOS _OSI(Linux) query honored via cmdline [ 0.383442] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.383574] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.383783] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.384181] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.384188] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.384195] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.384201] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.384207] pci_root PNP0A08:00: host bridge window [mem 0x3f700000-0xfed8ffff] [ 0.384281] pci 0000:00:02.0: reg 10: [mem 0xf7e00000-0xf7e7ffff] [ 0.384290] pci 0000:00:02.0: reg 14: [io 0xdc00-0xdc07] [ 0.384300] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref] [ 0.384309] pci 0000:00:02.0: reg 1c: [mem 0xf7d00000-0xf7dfffff] [ 0.384360] pci 0000:00:02.1: reg 10: [mem 0xf7e80000-0xf7efffff] [ 0.384468] pci 0000:00:1b.0: reg 10: [mem 0xf7cf8000-0xf7cfbfff 64bit] [ 0.384533] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.384541] pci 0000:00:1b.0: PME# disabled [ 0.384632] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.384639] pci 0000:00:1c.0: PME# disabled [ 0.384730] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.384737] pci 0000:00:1c.1: PME# disabled [ 0.384831] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.384838] pci 0000:00:1c.3: PME# disabled [ 0.384912] pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f] [ 0.384996] pci 0000:00:1d.1: reg 20: [io 0xd480-0xd49f] [ 0.385080] pci 0000:00:1d.2: reg 20: [io 0xd800-0xd81f] [ 0.385165] pci 0000:00:1d.3: reg 20: [io 0xd880-0xd89f] [ 0.385237] pci 0000:00:1d.7: reg 10: [mem 0xf7cf7c00-0xf7cf7fff] [ 0.385316] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.385324] pci 0000:00:1d.7: PME# disabled [ 0.385555] pci 0000:00:1f.2: reg 10: [io 0xd080-0xd087] [ 0.385568] pci 0000:00:1f.2: reg 14: [io 0xd000-0xd003] [ 0.385580] pci 0000:00:1f.2: reg 18: [io 0xcc00-0xcc07] [ 0.385592] pci 0000:00:1f.2: reg 1c: [io 0xc880-0xc883] [ 0.385605] pci 0000:00:1f.2: reg 20: [io 0xc800-0xc81f] [ 0.385617] pci 0000:00:1f.2: reg 24: [mem 0xf7cf7800-0xf7cf7bff] [ 0.385654] pci 0000:00:1f.2: PME# supported from D3hot [ 0.385661] pci 0000:00:1f.2: PME# disabled [ 0.385738] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 0.385827] pci 0000:00:1c.0: PCI bridge to [bus 04-04] [ 0.385835] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.385842] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.385853] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.385949] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x0000ffff 64bit] [ 0.386045] pci 0000:02:00.0: supports D1 [ 0.386049] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.386058] pci 0000:02:00.0: PME# disabled [ 0.400026] pci 0000:00:1c.1: PCI bridge to [bus 02-03] [ 0.400034] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 0.400042] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff] [ 0.400052] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref] [ 0.400153] pci 0000:01:00.0: reg 10: [mem 0xf7fc0000-0xf7ffffff 64bit] [ 0.400172] pci 0000:01:00.0: reg 18: [io 0xec00-0xec7f] [ 0.400262] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.400270] pci 0000:01:00.0: PME# disabled [ 0.420022] pci 0000:00:1c.3: PCI bridge to [bus 01-01] [ 0.420030] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.420038] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff] [ 0.420048] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.420128] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.420136] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.420144] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.420157] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.420163] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.420169] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.420175] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.420181] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.420187] pci 0000:00:1e.0: bridge window [mem 0x3f700000-0xfed8ffff] (subtractive decode) [ 0.420212] pci_bus 0000:00: on NUMA node 0 [ 0.420221] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.420492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.420574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.420637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.434081] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.434218] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.434350] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.434482] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.434613] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.434746] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.434877] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 0.435009] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.435239] SCSI subsystem initialized [ 0.435244] libata version 3.00 loaded. [ 0.435285] PCI: Using ACPI for IRQ routing [ 0.435285] PCI: pci_cache_line_size set to 64 bytes [ 0.435285] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.435285] reserve RAM buffer: 000000003f690000 - 000000003fffffff [ 0.435285] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.435285] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.435285] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.440025] Switching to clocksource tsc [ 0.440075] pnp: PnP ACPI init [ 0.440101] ACPI: bus type pnp registered [ 0.443171] pnp: PnP ACPI: found 13 devices [ 0.443177] ACPI: ACPI bus type pnp unregistered [ 0.443204] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.443212] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.443229] system 00:08: [io 0x025c-0x025f] has been reserved [ 0.443235] system 00:08: [io 0x0380-0x0383] has been reserved [ 0.443241] system 00:08: [io 0x0400-0x041f] has been reserved [ 0.443247] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.443253] system 00:08: [io 0x0800-0x087f] has been reserved [ 0.443259] system 00:08: [io 0x0480-0x04bf] has been reserved [ 0.443266] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.443272] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.443279] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved [ 0.443285] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.443291] system 00:08: [mem 0xfff00000-0xffffffff] could not be reserved [ 0.443303] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.443310] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.443320] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.443331] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.443337] system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved [ 0.443343] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.443350] system 00:0c: [mem 0x00100000-0x3f6fffff] could not be reserved [ 0.443356] system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved [ 0.450404] pci 0000:00:1c.0: BAR 14: assigned [mem 0x3f700000-0x3f8fffff] [ 0.450414] pci 0000:00:1c.0: BAR 15: assigned [mem 0x3f900000-0x3fafffff 64bit pref] [ 0.450422] pci 0000:00:1c.3: BAR 15: assigned [mem 0x3fb00000-0x3fcfffff 64bit pref] [ 0.450430] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.450437] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] [ 0.450442] pci 0000:00:1c.0: PCI bridge to [bus 04-04] [ 0.450448] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.450457] pci 0000:00:1c.0: bridge window [mem 0x3f700000-0x3f8fffff] [ 0.450465] pci 0000:00:1c.0: bridge window [mem 0x3f900000-0x3fafffff 64bit pref] [ 0.450477] pci 0000:02:00.0: BAR 0: assigned [mem 0xf8000000-0xf800ffff 64bit] [ 0.450491] pci 0000:02:00.0: BAR 0: set to [mem 0xf8000000-0xf800ffff 64bit] (PCI address [0xf8000000-0xf800ffff] [ 0.450498] pci 0000:00:1c.1: PCI bridge to [bus 02-03] [ 0.450503] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.450511] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff] [ 0.450519] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref] [ 0.450529] pci 0000:00:1c.3: PCI bridge to [bus 01-01] [ 0.450535] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.450543] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff] [ 0.450551] pci 0000:00:1c.3: bridge window [mem 0x3fb00000-0x3fcfffff 64bit pref] [ 0.450561] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.450565] pci 0000:00:1e.0: bridge window [io disabled] [ 0.450572] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.450578] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.450598] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.450611] alloc irq_desc for 16 on node -1 [ 0.450615] alloc kstat_irqs on node -1 [ 0.450629] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.450638] pci 0000:00:1c.0: setting latency timer to 64 [ 0.450651] pci 0000:00:1c.1: enabling device (0106 -> 0107) [ 0.450658] alloc irq_desc for 17 on node -1 [ 0.450661] alloc kstat_irqs on node -1 [ 0.450670] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.450678] pci 0000:00:1c.1: setting latency timer to 64 [ 0.450691] alloc irq_desc for 19 on node -1 [ 0.450695] alloc kstat_irqs on node -1 [ 0.450703] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.450710] pci 0000:00:1c.3: setting latency timer to 64 [ 0.450722] pci 0000:00:1e.0: setting latency timer to 64 [ 0.450730] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.450735] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.450740] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.450746] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.450751] pci_bus 0000:00: resource 8 [mem 0x3f700000-0xfed8ffff] [ 0.450757] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.450762] pci_bus 0000:04: resource 1 [mem 0x3f700000-0x3f8fffff] [ 0.450768] pci_bus 0000:04: resource 2 [mem 0x3f900000-0x3fafffff 64bit pref] [ 0.450774] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.450779] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff] [ 0.450785] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref] [ 0.450791] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.450796] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff] [ 0.450802] pci_bus 0000:01: resource 2 [mem 0x3fb00000-0x3fcfffff 64bit pref] [ 0.450808] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.450813] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.450818] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.450823] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff] [ 0.450829] pci_bus 0000:05: resource 8 [mem 0x3f700000-0xfed8ffff] [ 0.450886] NET: Registered protocol family 2 [ 0.450976] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.451346] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.452716] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.453419] TCP: Hash tables configured (established 131072 bind 65536) [ 0.453425] TCP reno registered [ 0.453434] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.453453] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.453623] pci 0000:00:02.0: Boot video device [ 0.453778] PCI: CLS 32 bytes, default 64 [ 0.454520] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.456958] Btrfs loaded [ 0.456969] msgmni has been set to 1985 [ 0.457300] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.457307] io scheduler noop registered [ 0.457370] io scheduler cfq registered (default) [ 0.457628] intel_idle: MWAIT substates: 0x20220 [ 0.457633] intel_idle: v0.4 model 0x1C [ 0.457636] intel_idle: lapic_timer_reliable_states 0x6 [ 0.457647] Marking TSC unstable due to TSC halts in idle states deeper than C2 [ 0.457718] Switching to clocksource hpet [ 0.457892] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.462541] ACPI: Lid Switch [LID] [ 0.462648] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.462657] ACPI: Sleep Button [SLPB] [ 0.462741] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.462749] ACPI: Power Button [PWRB] [ 0.462836] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.462844] ACPI: Power Button [PWRF] [ 0.462914] ACPI: acpi_idle yielding to intel_idle [ 0.475825] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.475831] ACPI: Thermal Zone [TZ00] (43 C) [ 0.476175] Linux agpgart interface v0.103 [ 0.476254] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset [ 0.476635] agpgart-intel 0000:00:00.0: detected 8188K stolen memory [ 0.489490] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.489569] [drm] Initialized drm 1.1.0 20060810 [ 0.489606] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.489615] i915 0000:00:02.0: setting latency timer to 64 [ 0.535458] alloc irq_desc for 40 on node -1 [ 0.535465] alloc kstat_irqs on node -1 [ 0.535481] i915 0000:00:02.0: irq 40 for MSI/MSI-X [ 0.535498] [drm] set up 7M of stolen space [ 0.642030] [drm] initialized overlay support [ 1.381438] Console: switching to colour frame buffer device 128x37 [ 1.387905] fb0: inteldrmfb frame buffer device [ 1.387910] drm: registered panic notifier [ 1.392829] ACPI Warning: _BQC returned an invalid level (20100702/video-634) [ 1.395700] acpi device:0d: registered as cooling_device2 [ 1.395876] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 1.395887] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.395927] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.396069] ahci 0000:00:1f.2: version 3.0 [ 1.396092] alloc irq_desc for 21 on node -1 [ 1.396096] alloc kstat_irqs on node -1 [ 1.396110] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.396163] alloc irq_desc for 41 on node -1 [ 1.396167] alloc kstat_irqs on node -1 [ 1.396180] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 1.396257] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode [ 1.396265] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 1.396273] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.396465] scsi0 : ahci [ 1.396648] scsi1 : ahci [ 1.396777] scsi2 : ahci [ 1.396907] scsi3 : ahci [ 1.397317] ata1: SATA max UDMA/133 abar m1024@0xf7cf7800 port 0xf7cf7900 irq 41 [ 1.397322] ata2: DUMMY [ 1.397326] ata3: DUMMY [ 1.397329] ata4: DUMMY [ 1.397588] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.414721] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.414733] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.414795] rtc_cmos 00:03: RTC can wake from S4 [ 1.414858] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.414895] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.414977] coretemp coretemp.0: Unable to read TjMax from CPU. [ 1.414987] coretemp coretemp.0: Using relative temperature scale! [ 1.415169] cpuidle: using governor ladder [ 1.415347] cpuidle: using governor menu [ 1.415658] TCP cubic registered [ 1.415785] PM: Checking image partition /dev/sda3 [ 1.740121] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.741066] ACPI Error: Attempt to CreateField of length zero (20100702/dsopcode-529) [ 1.741079] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE1.IATA] (Node ffff88003f02a500), AE_AML_OPERAND_VALUE [ 1.741096] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE1.PRT0._GTF] (Node ffff88003f02a3e8), AE_AML_OPERAND_VALUE [ 1.741114] ata1.00: _GTF evaluation failed (AE 0x3004) [ 1.741124] ata1.00: ATA-8: G.SKILL 64GB SSD, 02.10104, max UDMA/100 [ 1.741130] ata1.00: 125206528 sectors, multi 0: LBA [ 1.742000] ACPI Error: Attempt to CreateField of length zero (20100702/dsopcode-529) [ 1.742012] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE1.IATA] (Node ffff88003f02a500), AE_AML_OPERAND_VALUE [ 1.742028] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE1.PRT0._GTF] (Node ffff88003f02a3e8), AE_AML_OPERAND_VALUE [ 1.742046] ata1.00: _GTF evaluation failed (AE 0x3004) [ 1.742057] ata1.00: configured for UDMA/100 [ 1.760341] scsi 0:0:0:0: Direct-Access ATA G.SKILL 64GB SSD 02.1 PQ: 0 ANSI: 5 [ 1.760667] sd 0:0:0:0: [sda] 125206528 512-byte logical blocks: (64.1 GB/59.7 GiB) [ 1.760821] sd 0:0:0:0: [sda] Write Protect is off [ 1.760828] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.760885] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.658291] sda: sda1 sda2 sda3 sda4 [ 2.658824] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.658852] PM: Resume from partition 8:3 [ 2.658856] PM: Checking hibernation image. [ 2.660368] PM: Error -22 checking image file [ 2.660372] PM: Resume from disk failed. [ 2.660756] rtc_cmos 00:03: setting system clock to 2011-01-06 14:07:40 UTC (1294322860) [ 2.661196] device label dali devid 1 transid 452637 /dev/root [ 2.700813] VFS: Mounted root (btrfs filesystem) readonly on device 0:10. [ 2.700862] Freeing unused kernel memory: 364k freed [ 3.018738] NET: Registered protocol family 1 [ 3.239736] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.244280] ACPI: WMI: Mapper loaded [ 3.249662] ACPI: AC Adapter [AC0] (off-line) [ 3.415197] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.415223] atl1c 0000:01:00.0: setting latency timer to 64 [ 3.477380] ACPI: Battery Slot [BAT0] (battery present) [ 3.495450] eeepc_laptop: Eee PC Hotkey Driver [ 3.495615] eeepc_laptop: Hotkey init flags 0x41 [ 3.496446] eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling anyway [ 3.500076] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 3.511418] eeepc_laptop: PANELPOWER (4000000) not reported by BIOS, enabling anyway [ 3.540191] eeepc_laptop: TPD (8000000) not reported by BIOS, enabling anyway [ 3.540200] eeepc_laptop: Get control methods supported: 0xe101703 [ 3.540288] eeepc_laptop: Backlight controlled by ACPI video driver [ 3.540413] input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input6 [ 3.559207] Registered led device: eeepc::touchpad [ 3.570766] atl1c 0000:01:00.0: version 1.0.1.0-NAPI [ 3.621028] usbcore: registered new interface driver usbfs [ 3.621078] usbcore: registered new interface driver hub [ 3.624036] usbcore: registered new device driver usb [ 3.638569] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.643647] cfg80211: Calling CRDA to update world regulatory domain [ 3.662948] alloc irq_desc for 23 on node -1 [ 3.662957] alloc kstat_irqs on node -1 [ 3.662978] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.663031] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.663041] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.663065] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 3.663114] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 3.663135] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.667023] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 3.672903] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7cf7c00 [ 3.688454] uhci_hcd: USB Universal Host Controller Interface driver [ 3.700948] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.701008] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.701015] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.701020] usb usb1: Product: EHCI Host Controller [ 3.701025] usb usb1: Manufacturer: Linux 2.6.36 ehci_hcd [ 3.701029] usb usb1: SerialNumber: 0000:00:1d.7 [ 3.701298] hub 1-0:1.0: USB hub found [ 3.701315] hub 1-0:1.0: 8 ports detected [ 3.702150] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.702168] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.702175] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.702190] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.702238] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 [ 3.702340] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.702347] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.702353] usb usb2: Product: UHCI Host Controller [ 3.702357] usb usb2: Manufacturer: Linux 2.6.36 uhci_hcd [ 3.702361] usb usb2: SerialNumber: 0000:00:1d.0 [ 3.702573] hub 2-0:1.0: USB hub found [ 3.702588] hub 2-0:1.0: 2 ports detected [ 3.702740] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.702753] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.702760] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.702773] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.702832] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480 [ 3.702910] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.702916] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.702921] usb usb3: Product: UHCI Host Controller [ 3.702925] usb usb3: Manufacturer: Linux 2.6.36 uhci_hcd [ 3.702930] usb usb3: SerialNumber: 0000:00:1d.1 [ 3.703116] hub 3-0:1.0: USB hub found [ 3.703131] hub 3-0:1.0: 2 ports detected [ 3.703366] alloc irq_desc for 18 on node -1 [ 3.703373] alloc kstat_irqs on node -1 [ 3.703390] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.703405] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.703414] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.703432] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 3.703495] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 [ 3.703590] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.703598] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.703606] usb usb4: Product: UHCI Host Controller [ 3.703612] usb usb4: Manufacturer: Linux 2.6.36 uhci_hcd [ 3.703618] usb usb4: SerialNumber: 0000:00:1d.2 [ 3.703901] hub 4-0:1.0: USB hub found [ 3.703915] hub 4-0:1.0: 2 ports detected [ 3.704079] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 3.704099] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 3.704108] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.704129] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 3.704198] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880 [ 3.704290] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.704298] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.704305] usb usb5: Product: UHCI Host Controller [ 3.704311] usb usb5: Manufacturer: Linux 2.6.36 uhci_hcd [ 3.704317] usb usb5: SerialNumber: 0000:00:1d.3 [ 3.706129] hub 5-0:1.0: USB hub found [ 3.706151] hub 5-0:1.0: 2 ports detected [ 3.862688] alloc irq_desc for 22 on node -1 [ 3.862696] alloc kstat_irqs on node -1 [ 3.862718] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 3.862804] alloc irq_desc for 42 on node -1 [ 3.862811] alloc kstat_irqs on node -1 [ 3.862832] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X [ 3.862889] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 3.880333] ath9k 0000:02:00.0: enabling device (0000 -> 0002) [ 3.880353] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.880377] ath9k 0000:02:00.0: setting latency timer to 64 [ 3.930500] ath: EEPROM regdomain: 0x60 [ 3.930506] ath: EEPROM indicates we should expect a direct regpair map [ 3.930512] ath: Country alpha2 being used: 00 [ 3.930516] ath: Regpair used: 0x60 [ 3.936195] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 3.936809] Registered led device: ath9k-phy0::radio [ 3.936864] Registered led device: ath9k-phy0::assoc [ 3.936920] Registered led device: ath9k-phy0::tx [ 3.936982] Registered led device: ath9k-phy0::rx [ 3.937000] phy0: Atheros AR9285 Rev:2 mem=0xffffc90020e20000, irq=17 [ 3.960385] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 4.080134] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 4.234476] usb 1-6: New USB device found, idVendor=13d3, idProduct=5111 [ 4.234490] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=2 [ 4.234496] usb 1-6: Product: USB2.0 UVC VGA WebCam [ 4.234500] usb 1-6: Manufacturer: Image Processor [ 4.234504] usb 1-6: SerialNumber: USB2.0 UVC VGA WebCam [ 4.237387] WARNING! power/level is deprecated; use power/control instead [ 4.265099] Linux video capture interface: v2.00 [ 4.283238] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5111) [ 4.454139] usbcore: registered new interface driver uvcvideo [ 4.454146] USB Video Class driver (v0.1.0) [ 4.572712] btrfs: use ssd allocation scheme [ 4.572720] btrfs: use compression [ 4.666781] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04731/0xa40000/0xa0000 [ 4.737610] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 4.920051] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 5.101322] usb 5-1: New USB device found, idVendor=0b05, idProduct=1788 [ 5.101332] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.101341] usb 5-1: Product: BT-270 [ 5.101346] usb 5-1: Manufacturer: Broadcom Corp [ 5.101352] usb 5-1: SerialNumber: 1C4BD605DE97 [ 5.325478] Bluetooth: Core ver 2.15 [ 5.326075] NET: Registered protocol family 31 [ 5.326082] Bluetooth: HCI device and connection manager initialized [ 5.326090] Bluetooth: HCI socket layer initialized [ 5.339115] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 5.341862] usbcore: registered new interface driver btusb [ 5.380053] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 5.520104] usb 4-1: device descriptor read/64, error -71 [ 5.760115] usb 4-1: device descriptor read/64, error -71 [ 5.828159] fuse init (API version 7.15) [ 5.990099] usb 4-1: new full speed USB device using uhci_hcd and address 3 [ 5.995991] alloc irq_desc for 43 on node -1 [ 5.996000] alloc kstat_irqs on node -1 [ 5.996029] atl1c 0000:01:00.0: irq 43 for MSI/MSI-X [ 6.096070] NET: Registered protocol family 17 [ 6.120109] usb 4-1: device descriptor read/64, error -71 [ 6.360127] usb 4-1: device descriptor read/64, error -71 [ 6.590156] usb 4-1: new full speed USB device using uhci_hcd and address 4 [ 7.010317] usb 4-1: device not accepting address 4, error -71 [ 7.024912] Bluetooth: L2CAP ver 2.15 [ 7.024920] Bluetooth: L2CAP socket layer initialized [ 7.034841] Bluetooth: RFCOMM socket layer initialized [ 7.034850] Bluetooth: RFCOMM ver 1.11 [ 7.082095] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.082103] Bluetooth: BNEP filters: protocol multicast [ 7.097087] Bluetooth: SCO (Voice Link) ver 0.6 [ 7.097094] Bluetooth: SCO socket layer initialized [ 7.130128] usb 4-1: new full speed USB device using uhci_hcd and address 5 [ 7.456191] sshd (1053): /proc/1053/oom_adj is deprecated, please use /proc/1053/oom_score_adj instead. [ 7.550067] usb 4-1: device not accepting address 5, error -71 [ 7.552547] hub 4-0:1.0: unable to enumerate USB device on port 1 [ 13.940296] wlan0: authenticate with 00:1b:fc:06:4a:9d (try 1) [ 13.942342] wlan0: authenticated [ 13.959230] wlan0: associate with 00:1b:fc:06:4a:9d (try 1) [ 13.962073] wlan0: RX AssocResp from 00:1b:fc:06:4a:9d (capab=0x411 status=0 aid=3) [ 13.962084] wlan0: associated