[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1294453211-26439-2-git-send-email-youquan.song@intel.com>
Date: Sat, 8 Jan 2011 10:20:10 +0800
From: Youquan Song <youquan.song@...el.com>
To: linux-kernel@...r.kernel.org, hpa@...ux.intel.com,
suresh.b.siddha@...el.com
Cc: yong.y.wang@...ux.intel.com, joe@...ches.com, jbaron@...hat.com,
arjan@...ux.intel.com, trenn@...e.de, kent.liu@...el.com,
chaohong.guo@...el.com,
Youquan Song <youquan.song@...ux.intel.com>,
Youquan Song <youquan.song@...el.com>
Subject: [PATCH v3 1/2] apic: Fix error interrupt report at all APs
Recently, customer report that once machine boot, there are many error interrupt
reported with exact number of all APs.
The root cause is Local APIC will generate error interrupt when it detect
the illegal vector (one in 0 ~ 15) in an interrupt message received or
interrupt generate from local vector table or self IPI. SDM3A.chapter 10.
AP LAPIC thermal sensor register will be reset to 0x10000, if thermal throttling
interrupt take over by BIOS, it need restore AP with the thermal sensor register
value of geting from BSP, otherwise cause system issue. If BIOS does not take
over the thermal interrupt, The restore value will be CPU rest value of 0x10000,
which means the interrupt vector is zero. After writing 0x10000 to thermal
sensor LVT, the processor will recieve the error interrupt report if the APIC
error interrupt is also set.
This patch add check the BIOS whether take over the thermal interrupt by look
at interrupt delivery mode not fixed mode(BIOS handle will be SMI mode) before
restore AP's thermal LVT. So the agony noise of error interrupt will dismiss
when boot on machine that BIOS does not handle thermal interrupt..
Signed-off-by: Youquan Song <youquan.song@...el.com>
Acked-by: Suresh Siddha <suresh.b.siddha@...el.com>
Acked-by: Yong Wang <yong.y.wang@...el.com>
---
arch/x86/include/asm/apicdef.h | 1 +
arch/x86/kernel/cpu/mcheck/therm_throt.c | 12 +++++++-----
2 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index a859ca4..1495098 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -85,6 +85,7 @@
#define APIC_DM_INIT 0x00500
#define APIC_DM_STARTUP 0x00600
#define APIC_DM_EXTINT 0x00700
+#define APIC_DM_MASK 0x00700
#define APIC_VECTOR_MASK 0x000FF
#define APIC_ICR2 0x310
#define GET_APIC_DEST_FIELD(x) (((x) >> 24) & 0xFF)
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 4b68326..22a3b4f 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -405,18 +405,20 @@ void intel_init_thermal(struct cpuinfo_x86 *c)
*/
rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+ h = lvtthmr_init;
/*
* The initial value of thermal LVT entries on all APs always reads
* 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI
* sequence to them and LVT registers are reset to 0s except for
* the mask bits which are set to 1s when APs receive INIT IPI.
- * Always restore the value that BIOS has programmed on AP based on
- * BSP's info we saved since BIOS is always setting the same value
- * for all threads/cores
+ * If BIOS take over the thermal interrupt and set its interrupt
+ * delivery mode to SMI not fixed, it restore the value that BIOS has
+ * programmed on AP based on BSP's info we saved since BIOS is always
+ * setting the same value for all threads/cores.
*/
- apic_write(APIC_LVTTHMR, lvtthmr_init);
+ if (h & APIC_DM_MASK)
+ apic_write(APIC_LVTTHMR, lvtthmr_init);
- h = lvtthmr_init;
if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
printk(KERN_DEBUG
--
1.6.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists