| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 11 Jan 2011 16:27:26 -0700
From: Grant Likely <grant.likely@...retlab.ca>
To: Sebastian Andrzej Siewior <bigeasy@...utronix.de>
Cc: Benjamin Herrenschmidt <benh@...nel.crashing.org>, x86@...nel.org,
linux-kernel@...r.kernel.org, sodaville@...utronix.de,
Sebastian Andrzej Siewior <sebastian@...akpoint.cc>,
devicetree-discuss@...ts.ozlabs.org
Subject: Re: [PATCH v2 07/15] of: move of_irq_map_pci() into generic code
On Tue, Jan 04, 2011 at 03:27:54PM +0100, Sebastian Andrzej Siewior wrote:
> From: Sebastian Andrzej Siewior <sebastian@...akpoint.cc>
>
> There is a tiny difference between PPC32 and PPC64. Microblaze uses the
> PPC32 variant.
Mostly looks good, but breaks both Sparc and microblaze which is kind
of important to fix before I merge it. :-)
Sparc
-----
CC drivers/of/of_pci.o
/home/grant/hacking/linux-2.6/drivers/of/of_pci.c: In function 'of_irq_map_pci':
/home/grant/hacking/linux-2.6/drivers/of/of_pci.c:20: error: implicit declaration of function 'of_irq_map_one'
/home/grant/hacking/linux-2.6/drivers/of/of_pci.c:44: error: implicit declaration of function 'pci_bus_to_OF_node'
/home/grant/hacking/linux-2.6/drivers/of/of_pci.c:44: warning: assignment makes pointer from integer without a cast
/home/grant/hacking/linux-2.6/drivers/of/of_pci.c:78: error: implicit declaration of function 'of_irq_map_raw'
make[3]: *** [drivers/of/of_pci.o] Error 1
Microblaze
----------
CC arch/microblaze/kernel/prom.o
In file included from /home/grant/hacking/linux-2.6/arch/microblaze/include/asm/pci.h:23,
from /home/grant/hacking/linux-2.6/include/linux/pci.h:1230,
from /home/grant/hacking/linux-2.6/arch/microblaze/kernel/prom.c:23:
/home/grant/hacking/linux-2.6/arch/microblaze/include/asm/pci-bridge.h: In function 'pci_bus_to_OF_node':
/home/grant/hacking/linux-2.6/arch/microblaze/include/asm/pci-bridge.h:117: error: implicit declaration of function 'pci_device_to_OF_node'
/home/grant/hacking/linux-2.6/arch/microblaze/include/asm/pci-bridge.h:117: warning: return makes pointer from integer without a cast
make[2]: *** [arch/microblaze/kernel/prom.o] Error 1
make[1]: *** [arch/microblaze/kernel] Error 2
make: *** [sub-make] Error 2
>
> Cc: devicetree-discuss@...ts.ozlabs.org
> Cc: Benjamin Herrenschmidt <benh@...nel.crashing.org>
> Signed-off-by: Sebastian Andrzej Siewior <sebastian@...akpoint.cc>
> ---
> arch/microblaze/include/asm/pci-bridge.h | 10 ++++
> arch/microblaze/include/asm/prom.h | 15 -----
> arch/microblaze/kernel/prom_parse.c | 77 ---------------------------
> arch/microblaze/pci/pci-common.c | 1 +
> arch/powerpc/include/asm/pci-bridge.h | 10 ++++
> arch/powerpc/include/asm/prom.h | 15 -----
> arch/powerpc/kernel/pci-common.c | 1 +
> arch/powerpc/kernel/prom_parse.c | 84 ------------------------------
> drivers/of/Makefile | 1 +
> drivers/of/of_pci.c | 80 ++++++++++++++++++++++++++++
> include/linux/of_pci.h | 20 +++++++
> 11 files changed, 123 insertions(+), 191 deletions(-)
> create mode 100644 drivers/of/of_pci.c
> create mode 100644 include/linux/of_pci.h
>
> diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
> index 0c68764..0808217 100644
> --- a/arch/microblaze/include/asm/pci-bridge.h
> +++ b/arch/microblaze/include/asm/pci-bridge.h
> @@ -109,6 +109,16 @@ static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
> return bus->sysdata;
> }
>
> +static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
> +{
> + struct pci_controller *host;
> +
> + if (bus->self)
> + return pci_device_to_OF_node(bus->self);
> + host = pci_bus_to_host(bus);
> + return host ? host->dn : NULL;
> +}
> +
> static inline int isa_vaddr_is_ioport(void __iomem *address)
> {
> /* No specific ISA handling on ppc32 at this stage, it
> diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
> index bdc3831..aa3ab12 100644
> --- a/arch/microblaze/include/asm/prom.h
> +++ b/arch/microblaze/include/asm/prom.h
> @@ -67,21 +67,6 @@ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
> /* Get the MAC address */
> extern const void *of_get_mac_address(struct device_node *np);
>
> -/**
> - * of_irq_map_pci - Resolve the interrupt for a PCI device
> - * @pdev: the device whose interrupt is to be resolved
> - * @out_irq: structure of_irq filled by this function
> - *
> - * This function resolves the PCI interrupt for a given PCI device. If a
> - * device-node exists for a given pci_dev, it will use normal OF tree
> - * walking. If not, it will implement standard swizzling and walk up the
> - * PCI tree until an device-node is found, at which point it will finish
> - * resolving using the OF tree walking.
> - */
> -struct pci_dev;
> -struct of_irq;
> -extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
> -
> #endif /* __ASSEMBLY__ */
> #endif /* __KERNEL__ */
>
> diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c
> index 99d9b61..306f41d 100644
> --- a/arch/microblaze/kernel/prom_parse.c
> +++ b/arch/microblaze/kernel/prom_parse.c
> @@ -2,88 +2,11 @@
>
> #include <linux/kernel.h>
> #include <linux/string.h>
> -#include <linux/pci_regs.h>
> #include <linux/module.h>
> #include <linux/ioport.h>
> #include <linux/etherdevice.h>
> #include <linux/of_address.h>
> #include <asm/prom.h>
> -#include <asm/pci-bridge.h>
> -
> -#ifdef CONFIG_PCI
> -int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
> -{
> - struct device_node *dn, *ppnode;
> - struct pci_dev *ppdev;
> - u32 lspec;
> - u32 laddr[3];
> - u8 pin;
> - int rc;
> -
> - /* Check if we have a device node, if yes, fallback to standard OF
> - * parsing
> - */
> - dn = pci_device_to_OF_node(pdev);
> - if (dn)
> - return of_irq_map_one(dn, 0, out_irq);
> -
> - /* Ok, we don't, time to have fun. Let's start by building up an
> - * interrupt spec. we assume #interrupt-cells is 1, which is standard
> - * for PCI. If you do different, then don't use that routine.
> - */
> - rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
> - if (rc != 0)
> - return rc;
> - /* No pin, exit */
> - if (pin == 0)
> - return -ENODEV;
> -
> - /* Now we walk up the PCI tree */
> - lspec = pin;
> - for (;;) {
> - /* Get the pci_dev of our parent */
> - ppdev = pdev->bus->self;
> -
> - /* Ouch, it's a host bridge... */
> - if (ppdev == NULL) {
> - struct pci_controller *host;
> - host = pci_bus_to_host(pdev->bus);
> - ppnode = host ? host->dn : NULL;
> - /* No node for host bridge ? give up */
> - if (ppnode == NULL)
> - return -EINVAL;
> - } else
> - /* We found a P2P bridge, check if it has a node */
> - ppnode = pci_device_to_OF_node(ppdev);
> -
> - /* Ok, we have found a parent with a device-node, hand over to
> - * the OF parsing code.
> - * We build a unit address from the linux device to be used for
> - * resolution. Note that we use the linux bus number which may
> - * not match your firmware bus numbering.
> - * Fortunately, in most cases, interrupt-map-mask doesn't
> - * include the bus number as part of the matching.
> - * You should still be careful about that though if you intend
> - * to rely on this function (you ship a firmware that doesn't
> - * create device nodes for all PCI devices).
> - */
> - if (ppnode)
> - break;
> -
> - /* We can only get here if we hit a P2P bridge with no node,
> - * let's do standard swizzling and try again
> - */
> - lspec = pci_swizzle_interrupt_pin(pdev, lspec);
> - pdev = ppdev;
> - }
> -
> - laddr[0] = (pdev->bus->number << 16)
> - | (pdev->devfn << 8);
> - laddr[1] = laddr[2] = 0;
> - return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
> -}
> -EXPORT_SYMBOL_GPL(of_irq_map_pci);
> -#endif /* CONFIG_PCI */
>
> void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
> unsigned long *busno, unsigned long *phys, unsigned long *size)
> diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
> index e363615..1e01a12 100644
> --- a/arch/microblaze/pci/pci-common.c
> +++ b/arch/microblaze/pci/pci-common.c
> @@ -29,6 +29,7 @@
> #include <linux/slab.h>
> #include <linux/of.h>
> #include <linux/of_address.h>
> +#include <linux/of_pci.h>
>
> #include <asm/processor.h>
> #include <asm/io.h>
> diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
> index 51e9e6f..edeb80f 100644
> --- a/arch/powerpc/include/asm/pci-bridge.h
> +++ b/arch/powerpc/include/asm/pci-bridge.h
> @@ -171,6 +171,16 @@ static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
> return bus->sysdata;
> }
>
> +static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
> +{
> + struct pci_controller *host;
> +
> + if (bus->self)
> + return pci_device_to_OF_node(bus->self);
> + host = pci_bus_to_host(bus);
> + return host ? host->dn : NULL;
> +}
> +
> static inline int isa_vaddr_is_ioport(void __iomem *address)
> {
> /* No specific ISA handling on ppc32 at this stage, it
> diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
> index ae26f2e..01c3302 100644
> --- a/arch/powerpc/include/asm/prom.h
> +++ b/arch/powerpc/include/asm/prom.h
> @@ -73,21 +73,6 @@ static inline int of_node_to_nid(struct device_node *device) { return 0; }
> #endif
> #define of_node_to_nid of_node_to_nid
>
> -/**
> - * of_irq_map_pci - Resolve the interrupt for a PCI device
> - * @pdev: the device whose interrupt is to be resolved
> - * @out_irq: structure of_irq filled by this function
> - *
> - * This function resolves the PCI interrupt for a given PCI device. If a
> - * device-node exists for a given pci_dev, it will use normal OF tree
> - * walking. If not, it will implement standard swizzling and walk up the
> - * PCI tree until an device-node is found, at which point it will finish
> - * resolving using the OF tree walking.
> - */
> -struct pci_dev;
> -struct of_irq;
> -extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
> -
> extern void of_instantiate_rtc(void);
>
> /* These includes are put at the bottom because they may contain things
> diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
> index 10a44e6..eb341be 100644
> --- a/arch/powerpc/kernel/pci-common.c
> +++ b/arch/powerpc/kernel/pci-common.c
> @@ -22,6 +22,7 @@
> #include <linux/init.h>
> #include <linux/bootmem.h>
> #include <linux/of_address.h>
> +#include <linux/of_pci.h>
> #include <linux/mm.h>
> #include <linux/list.h>
> #include <linux/syscalls.h>
> diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
> index 88334af..306f41d 100644
> --- a/arch/powerpc/kernel/prom_parse.c
> +++ b/arch/powerpc/kernel/prom_parse.c
> @@ -2,95 +2,11 @@
>
> #include <linux/kernel.h>
> #include <linux/string.h>
> -#include <linux/pci_regs.h>
> #include <linux/module.h>
> #include <linux/ioport.h>
> #include <linux/etherdevice.h>
> #include <linux/of_address.h>
> #include <asm/prom.h>
> -#include <asm/pci-bridge.h>
> -
> -#ifdef CONFIG_PCI
> -int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
> -{
> - struct device_node *dn, *ppnode;
> - struct pci_dev *ppdev;
> - u32 lspec;
> - u32 laddr[3];
> - u8 pin;
> - int rc;
> -
> - /* Check if we have a device node, if yes, fallback to standard OF
> - * parsing
> - */
> - dn = pci_device_to_OF_node(pdev);
> - if (dn) {
> - rc = of_irq_map_one(dn, 0, out_irq);
> - if (!rc)
> - return rc;
> - }
> -
> - /* Ok, we don't, time to have fun. Let's start by building up an
> - * interrupt spec. we assume #interrupt-cells is 1, which is standard
> - * for PCI. If you do different, then don't use that routine.
> - */
> - rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
> - if (rc != 0)
> - return rc;
> - /* No pin, exit */
> - if (pin == 0)
> - return -ENODEV;
> -
> - /* Now we walk up the PCI tree */
> - lspec = pin;
> - for (;;) {
> - /* Get the pci_dev of our parent */
> - ppdev = pdev->bus->self;
> -
> - /* Ouch, it's a host bridge... */
> - if (ppdev == NULL) {
> -#ifdef CONFIG_PPC64
> - ppnode = pci_bus_to_OF_node(pdev->bus);
> -#else
> - struct pci_controller *host;
> - host = pci_bus_to_host(pdev->bus);
> - ppnode = host ? host->dn : NULL;
> -#endif
> - /* No node for host bridge ? give up */
> - if (ppnode == NULL)
> - return -EINVAL;
> - } else
> - /* We found a P2P bridge, check if it has a node */
> - ppnode = pci_device_to_OF_node(ppdev);
> -
> - /* Ok, we have found a parent with a device-node, hand over to
> - * the OF parsing code.
> - * We build a unit address from the linux device to be used for
> - * resolution. Note that we use the linux bus number which may
> - * not match your firmware bus numbering.
> - * Fortunately, in most cases, interrupt-map-mask doesn't include
> - * the bus number as part of the matching.
> - * You should still be careful about that though if you intend
> - * to rely on this function (you ship a firmware that doesn't
> - * create device nodes for all PCI devices).
> - */
> - if (ppnode)
> - break;
> -
> - /* We can only get here if we hit a P2P bridge with no node,
> - * let's do standard swizzling and try again
> - */
> - lspec = pci_swizzle_interrupt_pin(pdev, lspec);
> - pdev = ppdev;
> - }
> -
> - laddr[0] = (pdev->bus->number << 16)
> - | (pdev->devfn << 8);
> - laddr[1] = laddr[2] = 0;
> - return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
> -}
> -EXPORT_SYMBOL_GPL(of_irq_map_pci);
> -#endif /* CONFIG_PCI */
>
> void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
> unsigned long *busno, unsigned long *phys, unsigned long *size)
> diff --git a/drivers/of/Makefile b/drivers/of/Makefile
> index 7888155..4dcb177 100644
> --- a/drivers/of/Makefile
> +++ b/drivers/of/Makefile
> @@ -8,3 +8,4 @@ obj-$(CONFIG_OF_GPIO) += gpio.o
> obj-$(CONFIG_OF_I2C) += of_i2c.o
> obj-$(CONFIG_OF_SPI) += of_spi.o
> obj-$(CONFIG_OF_MDIO) += of_mdio.o
> +obj-$(CONFIG_PCI) += of_pci.o
> diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
> new file mode 100644
> index 0000000..dd862d2
> --- /dev/null
> +++ b/drivers/of/of_pci.c
> @@ -0,0 +1,80 @@
> +#include <linux/kernel.h>
> +#include <linux/of_pci.h>
> +#include <asm/prom.h>
> +
> +int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
> +{
> + struct device_node *dn, *ppnode;
> + struct pci_dev *ppdev;
> + u32 lspec;
> + __be32 lspec_be;
> + __be32 laddr[3];
> + u8 pin;
> + int rc;
> +
> + /* Check if we have a device node, if yes, fallback to standard OF
> + * parsing
> + */
> + dn = pci_device_to_OF_node(pdev);
> + if (dn) {
> + rc = of_irq_map_one(dn, 0, out_irq);
> + if (!rc)
> + return rc;
> + }
> +
> + /* Ok, we don't, time to have fun. Let's start by building up an
> + * interrupt spec. we assume #interrupt-cells is 1, which is standard
> + * for PCI. If you do different, then don't use that routine.
> + */
> + rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
> + if (rc != 0)
> + return rc;
> + /* No pin, exit */
> + if (pin == 0)
> + return -ENODEV;
> +
> + /* Now we walk up the PCI tree */
> + lspec = pin;
> + for (;;) {
> + /* Get the pci_dev of our parent */
> + ppdev = pdev->bus->self;
> +
> + /* Ouch, it's a host bridge... */
> + if (ppdev == NULL) {
> + ppnode = pci_bus_to_OF_node(pdev->bus);
> +
> + /* No node for host bridge ? give up */
> + if (ppnode == NULL)
> + return -EINVAL;
> + } else {
> + /* We found a P2P bridge, check if it has a node */
> + ppnode = pci_device_to_OF_node(ppdev);
> + }
> +
> + /* Ok, we have found a parent with a device-node, hand over to
> + * the OF parsing code.
> + * We build a unit address from the linux device to be used for
> + * resolution. Note that we use the linux bus number which may
> + * not match your firmware bus numbering.
> + * Fortunately, in most cases, interrupt-map-mask doesn't
> + * include the bus number as part of the matching.
> + * You should still be careful about that though if you intend
> + * to rely on this function (you ship a firmware that doesn't
> + * create device nodes for all PCI devices).
> + */
> + if (ppnode)
> + break;
> +
> + /* We can only get here if we hit a P2P bridge with no node,
> + * let's do standard swizzling and try again
> + */
> + lspec = pci_swizzle_interrupt_pin(pdev, lspec);
> + pdev = ppdev;
> + }
> +
> + lspec_be = cpu_to_be32(lspec);
> + laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
> + laddr[1] = laddr[2] = cpu_to_be32(0);
> + return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq);
> +}
> +EXPORT_SYMBOL_GPL(of_irq_map_pci);
> diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
> new file mode 100644
> index 0000000..9b0ba67
> --- /dev/null
> +++ b/include/linux/of_pci.h
> @@ -0,0 +1,20 @@
> +#ifndef __OF_PCI_H
> +#define __OF_PCI_H
> +
> +#include <linux/pci.h>
> +
> +/**
> + * of_irq_map_pci - Resolve the interrupt for a PCI device
> + * @pdev: the device whose interrupt is to be resolved
> + * @out_irq: structure of_irq filled by this function
> + *
> + * This function resolves the PCI interrupt for a given PCI device. If a
> + * device-node exists for a given pci_dev, it will use normal OF tree
> + * walking. If not, it will implement standard swizzling and walk up the
> + * PCI tree until an device-node is found, at which point it will finish
> + * resolving using the OF tree walking.
> + */
> +struct pci_dev;
> +struct of_irq;
> +int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
> +#endif
> --
> 1.7.3.2
>
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss@...ts.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists