Message-ID: <20110113025646.GB27381@tux1.beaverton.ibm.com>
Date:	Wed, 12 Jan 2011 18:56:46 -0800
From:	"Darrick J. Wong" <djwong@...ibm.com>
To:	Jens Axboe <axboe@...nel.dk>
Cc:	"Theodore Ts'o" <tytso@....edu>, Neil Brown <neilb@...e.de>,
	Andreas Dilger <adilger.kernel@...ger.ca>,
	Jan Kara <jack@...e.cz>, Mike Snitzer <snitzer@...hat.com>,
	linux-kernel <linux-kernel@...r.kernel.org>,
	Keith Mannthey <kmannth@...ibm.com>,
	Mingming Cao <cmm@...ibm.com>, Tejun Heo <tj@...nel.org>,
	linux-ext4@...r.kernel.org, Ric Wheeler <rwheeler@...hat.com>,
	Christoph Hellwig <hch@....de>, Josef Bacik <josef@...hat.com>
Subject: [PATCH v7.1] block: Coordinate flush requests

On certain types of storage hardware, flushing the write cache takes a
considerable amount of time.  Typically, these are simple storage systems with
write cache enabled and no battery to save that cache during a power failure.
When we encounter a system with many I/O threads that try to flush the cache,
performance is suboptimal because each of those threads issues its own flush
command to the drive instead of trying to coordinate the flushes, thereby
wasting execution time.

Instead of each thread initiating its own flush, we now try to detect the
situation where multiple threads are issuing flush requests.  The first thread
to enter blkdev_issue_flush becomes the owner of the flush, and all threads
that enter blkdev_issue_flush before the flush finishes are queued up to wait
for the next flush.  When that first flush finishes, one of those sleeping
threads is woken up to perform the next flush and then wake up the other
threads which are asleep waiting for the second flush to finish.

In the single-threaded case, the thread will simply issue the flush and exit.

To test the performance of this latest patch, I created a spreadsheet
reflecting the performance numbers I obtained with the same ffsb fsync-happy
workload that I've been running all along:  http://tinyurl.com/6xqk5bs

The second tab of the workbook provides easy comparisons of the performance
before and after adding flush coordination to the block layer.  Variations in
the runs were never more than about 5%, so the slight performance increases and
decreases are negligible.  It is expected that devices with low flush times
should not show much change, whether the low flush times are due to the lack of
write cache or the controller having a battery and thereby ignoring the flush
command.

Notice that the elm3b231_ipr, elm3b231_bigfc, elm3b57, elm3c44_ssd,
elm3c44_sata_wc, and elm3c71_scsi profiles showed large performance increases
from flush coordination.  These 6 configurations all feature large write caches
without battery backups, and fairly high (or at least non-zero) average flush
times, as was discovered when I studied the v6 patch.

Unfortunately, there is one very odd regression: elm3c44_sas.  This profile is
a couple of battery-backed RAID cabinets striped together with raid0 on md.  I
suspect that there is some sort of problematic interaction with md, because
running ffsb on the individual hardware arrays produces numbers similar to
elm3c71_extsas.  elm3c71_extsas uses the same type of hardware array as does
elm3c44_sas, in fact.

FYI, the flush coordination patch shows performance improvements both with and
without Christoph's patch that issues pure flushes directly.  The spreadsheet
only captures the performance numbers collected without Christoph's patch.

Signed-off-by: Darrick J. Wong <djwong@...ibm.com>
---

 block/blk-flush.c     |  137 +++++++++++++++++++++++++++++++++++++++++--------
 block/genhd.c         |   12 ++++
 include/linux/genhd.h |   15 +++++
 3 files changed, 143 insertions(+), 21 deletions(-)

diff --git a/block/blk-flush.c b/block/blk-flush.c
index 2402a34..d6c9931 100644
--- a/block/blk-flush.c
+++ b/block/blk-flush.c
@@ -201,6 +201,60 @@ static void bio_end_flush(struct bio *bio, int err)
 	bio_put(bio);
 }
 
+static int blkdev_issue_flush_now(struct block_device *bdev,
+		gfp_t gfp_mask, sector_t *error_sector)
+{
+	DECLARE_COMPLETION_ONSTACK(wait);
+	struct bio *bio;
+	int ret = 0;
+
+	bio = bio_alloc(gfp_mask, 0);
+	bio->bi_end_io = bio_end_flush;
+	bio->bi_bdev = bdev;
+	bio->bi_private = &wait;
+
+	bio_get(bio);
+	submit_bio(WRITE_FLUSH, bio);
+	wait_for_completion(&wait);
+
+	/*
+	 * The driver must store the error location in ->bi_sector, if
+	 * it supports it. For non-stacked drivers, this should be
+	 * copied from blk_rq_pos(rq).
+	 */
+	if (error_sector)
+		*error_sector = bio->bi_sector;
+
+	if (!bio_flagged(bio, BIO_UPTODATE))
+		ret = -EIO;
+
+	bio_put(bio);
+	return ret;
+}
+
+struct flush_completion_t *alloc_flush_completion(gfp_t gfp_mask)
+{
+	struct flush_completion_t *t;
+
+	t = kzalloc(sizeof(*t), gfp_mask);
+	if (!t)
+		return t;
+
+	init_completion(&t->ready);
+	init_completion(&t->finish);
+	kref_init(&t->ref);
+
+	return t;
+}
+
+void free_flush_completion(struct kref *ref)
+{
+	struct flush_completion_t *f;
+
+	f = container_of(ref, struct flush_completion_t, ref);
+	kfree(f);
+}
+
 /**
  * blkdev_issue_flush - queue a flush
  * @bdev:	blockdev to issue flush for
@@ -216,18 +270,22 @@ static void bio_end_flush(struct bio *bio, int err)
 int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask,
 		sector_t *error_sector)
 {
-	DECLARE_COMPLETION_ONSTACK(wait);
+	struct flush_completion_t *flush, *new_flush;
 	struct request_queue *q;
-	struct bio *bio;
+	struct gendisk *disk;
 	int ret = 0;
 
-	if (bdev->bd_disk == NULL)
+	disk = bdev->bd_disk;
+	if (disk == NULL)
 		return -ENXIO;
 
 	q = bdev_get_queue(bdev);
 	if (!q)
 		return -ENXIO;
 
+	if (!(q->flush_flags & REQ_FLUSH))
+		return -ENXIO;
+
 	/*
 	 * some block devices may not have their queue correctly set up here
 	 * (e.g. loop device without a backing file) and so issuing a flush
@@ -237,27 +295,64 @@ int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask,
 	if (!q->make_request_fn)
 		return -ENXIO;
 
-	bio = bio_alloc(gfp_mask, 0);
-	bio->bi_end_io = bio_end_flush;
-	bio->bi_bdev = bdev;
-	bio->bi_private = &wait;
-
-	bio_get(bio);
-	submit_bio(WRITE_FLUSH, bio);
-	wait_for_completion(&wait);
+	/* coordinate flushes */
+	new_flush = alloc_flush_completion(gfp_mask);
+	if (!new_flush)
+		return -ENOMEM;
+
+again:
+	spin_lock(&disk->flush_flag_lock);
+	if (disk->in_flush) {
+		/* Flush in progress */
+		kref_get(&disk->next_flush->ref);
+		flush = disk->next_flush;
+		ret = atomic_read(&flush->waiters);
+		atomic_inc(&flush->waiters);
+		spin_unlock(&disk->flush_flag_lock);
 
-	/*
-	 * The driver must store the error location in ->bi_sector, if
-	 * it supports it. For non-stacked drivers, this should be
-	 * copied from blk_rq_pos(rq).
-	 */
-	if (error_sector)
-               *error_sector = bio->bi_sector;
+		/*
+		 * If there aren't any waiters, this thread will be woken
+		 * up to start the next flush.
+		 */
+		if (!ret) {
+			wait_for_completion(&flush->ready);
+			kref_put(&flush->ref, free_flush_completion);
+			goto again;
+		}
 
-	if (!bio_flagged(bio, BIO_UPTODATE))
-		ret = -EIO;
+		/* Otherwise, just wait for this flush to end. */
+		ret = wait_for_completion_killable(&flush->finish);
+		if (!ret)
+			ret = flush->ret;
+		kref_put(&flush->ref, free_flush_completion);
+		kref_put(&new_flush->ref, free_flush_completion);
+	} else {
+		/* no flush in progress */
+		flush = disk->next_flush;
+		disk->next_flush = new_flush;
+		disk->in_flush = 1;
+		spin_unlock(&disk->flush_flag_lock);
+
+		ret = blkdev_issue_flush_now(bdev, gfp_mask, error_sector);
+		flush->ret = ret;
+
+		/* Wake up the thread that starts the next flush. */
+		spin_lock(&disk->flush_flag_lock);
+		disk->in_flush = 0;
+		/*
+		 * This line must be between the zeroing of in_flush and the
+		 * spin_unlock because we don't want the next-flush thread to
+		 * start messing with pointers until we're safely out of this
+		 * section.  It must be the first complete_all, because on some
+		 * fast devices, the next flush finishes (and frees
+		 * next_flush!) before the second complete_all finishes!
+		 */
+		complete_all(&new_flush->ready);
+		spin_unlock(&disk->flush_flag_lock);
 
-	bio_put(bio);
+		complete_all(&flush->finish);
+		kref_put(&flush->ref, free_flush_completion);
+	}
 	return ret;
 }
 EXPORT_SYMBOL(blkdev_issue_flush);
diff --git a/block/genhd.c b/block/genhd.c
index 5fa2b44..d239eda 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -1009,6 +1009,7 @@ static void disk_release(struct device *dev)
 	disk_replace_part_tbl(disk, NULL);
 	free_part_stats(&disk->part0);
 	free_part_info(&disk->part0);
+	kref_put(&disk->next_flush->ref, free_flush_completion);
 	kfree(disk);
 }
 struct class block_class = {
@@ -1177,17 +1178,24 @@ EXPORT_SYMBOL(alloc_disk);
 struct gendisk *alloc_disk_node(int minors, int node_id)
 {
 	struct gendisk *disk;
+	struct flush_completion_t *t;
+
+	t = alloc_flush_completion(GFP_KERNEL);
+	if (!t)
+		return NULL;
 
 	disk = kmalloc_node(sizeof(struct gendisk),
 				GFP_KERNEL | __GFP_ZERO, node_id);
 	if (disk) {
 		if (!init_part_stats(&disk->part0)) {
+			kfree(t);
 			kfree(disk);
 			return NULL;
 		}
 		disk->node_id = node_id;
 		if (disk_expand_part_tbl(disk, 0)) {
 			free_part_stats(&disk->part0);
+			kfree(t);
 			kfree(disk);
 			return NULL;
 		}
@@ -1200,6 +1208,10 @@ struct gendisk *alloc_disk_node(int minors, int node_id)
 		device_initialize(disk_to_dev(disk));
 		INIT_WORK(&disk->async_notify,
 			media_change_notify_thread);
+
+		disk->in_flush = 0;
+		spin_lock_init(&disk->flush_flag_lock);
+		disk->next_flush = t;
 	}
 	return disk;
 }
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 7a7b9c1..564a1d1 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -16,6 +16,16 @@
 
 #ifdef CONFIG_BLOCK
 
+struct flush_completion_t {
+	struct completion ready;
+	struct completion finish;
+	int ret;
+	atomic_t waiters;
+	struct kref ref;
+};
+extern struct flush_completion_t *alloc_flush_completion(gfp_t gfp_mask);
+extern void free_flush_completion(struct kref *ref);
+
 #define kobj_to_dev(k)		container_of((k), struct device, kobj)
 #define dev_to_disk(device)	container_of((device), struct gendisk, part0.__dev)
 #define dev_to_part(device)	container_of((device), struct hd_struct, __dev)
@@ -178,6 +188,11 @@ struct gendisk {
 	struct blk_integrity *integrity;
 #endif
 	int node_id;
+
+	/* flush coordination */
+	spinlock_t flush_flag_lock;
+	int in_flush;
+	struct flush_completion_t *next_flush;
 };
 
 static inline struct gendisk *part_to_disk(struct hd_struct *part)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists