| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <AANLkTim4N9n5XY5ecso-b3w6pOFY6JMn5O9TKrvoqs1b@mail.gmail.com>
Date: Mon, 24 Jan 2011 15:47:37 +0800
From: Hui Zhu <teawater@...il.com>
To: linux-kernel@...r.kernel.org
Cc: gdb@...rceware.org, hellogcc@...elists.org
Subject: Re: [PATCH] Built kernel without -O2 option
https://lkml.org/lkml/2010/11/28/211
Update follow kernel trunk.
I built and use it in i386 and x86_64 with 2.6.38-rc2+.
And I will put new patch in here and
http://code.google.com/p/kgtp/downloads/list
Thanks,
Hui
Signed-off-by: Hui Zhu <teawater@...il.com>
---
---
Makefile | 2 ++
arch/x86/crypto/Makefile | 6 ++++++
arch/x86/include/asm/page_64_types.h | 4 ++++
arch/x86/include/asm/uaccess_32.h | 4 ++++
arch/x86/kernel/Makefile | 9 +++++++++
arch/x86/kvm/Makefile | 6 ++++++
arch/x86/lib/Makefile | 4 ++++
arch/x86/power/Makefile | 4 ++++
crypto/Makefile | 4 ++++
drivers/char/mwave/Makefile | 4 ++++
drivers/gpu/drm/i915/Makefile | 4 ++++
drivers/gpu/drm/i915/i915_drv.h | 4 ++++
drivers/gpu/drm/nouveau/Makefile | 4 ++++
drivers/gpu/drm/radeon/Makefile | 4 ++++
drivers/infiniband/hw/qib/Makefile | 4 ++++
drivers/net/can/sja1000/Makefile | 4 ++++
drivers/staging/comedi/drivers/Makefile | 4 ++++
drivers/staging/et131x/et1310_address_map.h | 8 ++++++++
drivers/staging/rtl8187se/ieee80211/ieee80211.h | 8 ++++++++
drivers/staging/wlags49_h2/wl_internal.h | 9 ++++++++-
drivers/usb/gadget/f_loopback.c | 2 ++
drivers/usb/gadget/f_sourcesink.c | 2 ++
drivers/usb/gadget/g_zero.h | 2 ++
drivers/usb/host/Makefile | 4 ++++
fs/Makefile | 5 +++++
include/linux/pagemap.h | 2 ++
init/Kconfig | 1 +
kernel/Makefile | 4 ++++
kernel/kfifo.c | 3 +++
lib/Kconfig.debug | 8 ++++++++
lib/raid6/Makefile | 6 ++++++
mm/Makefile | 6 ++++++
mm/memory.c | 6 ++++++
mm/mincore.c | 2 ++
mm/percpu.c | 4 ++++
mm/rmap.c | 2 ++
net/mac80211/cfg.c | 2 ++
net/mac80211/iface.c | 8 ++++++++
net/mac80211/mesh.h | 2 ++
net/mac80211/rx.c | 8 ++++++++
net/mac80211/sta_info.c | 2 ++
net/mac80211/status.c | 2 ++
net/mac80211/tx.c | 4 ++++
net/netfilter/nf_conntrack_pptp.c | 3 ++-
44 files changed, 188 insertions(+), 2 deletions(-)
--- a/Makefile
+++ b/Makefile
@@ -541,8 +541,10 @@ all: vmlinux
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
KBUILD_CFLAGS += -Os
else
+ifndef CONFIG_CC_CLOSE_OPTIMIZATION
KBUILD_CFLAGS += -O2
endif
+endif
include $(srctree)/arch/$(SRCARCH)/Makefile
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -2,6 +2,12 @@
# Arch-specific CryptoAPI modules.
#
+ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+CFLAGS_fpu.o += -O2
+CFLAGS_aesni-intel_glue.o += -O2
+CFLAGS_ghash-clmulni-intel_glue.o += -O2
+endif
+
obj-$(CONFIG_CRYPTO_FPU) += fpu.o
obj-$(CONFIG_CRYPTO_AES_586) += aes-i586.o
--- a/arch/x86/include/asm/page_64_types.h
+++ b/arch/x86/include/asm/page_64_types.h
@@ -1,7 +1,11 @@
#ifndef _ASM_X86_PAGE_64_DEFS_H
#define _ASM_X86_PAGE_64_DEFS_H
+#ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+#define THREAD_ORDER 2
+#else
#define THREAD_ORDER 1
+#endif
#define THREAD_SIZE (PAGE_SIZE << THREAD_ORDER)
#define CURRENT_MASK (~(THREAD_SIZE - 1))
--- a/arch/x86/include/asm/uaccess_32.h
+++ b/arch/x86/include/asm/uaccess_32.h
@@ -209,7 +209,11 @@ static inline unsigned long __must_check
if (likely(sz == -1 || sz >= n))
n = _copy_from_user(to, from, n);
else
+#ifndef CONFIG_CC_CLOSE_OPTIMIZATION
copy_from_user_overflow();
+#else
+ n = -EFAULT;
+#endif
return n;
}
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -31,6 +31,15 @@ GCOV_PROFILE_hpet.o := n
GCOV_PROFILE_tsc.o := n
GCOV_PROFILE_paravirt.o := n
+ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+CFLAGS_process_$(BITS).o += -O2
+CFLAGS_entry_$(BITS).o += -O2
+CFLAGS_traps.o += -O2
+CFLAGS_i387.o += -O2
+CFLAGS_xsave.o += -O2
+CFLAGS_hpet.o += -O2
+endif
+
obj-y := process_$(BITS).o signal.o entry_$(BITS).o
obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
obj-y += time.o ioport.o ldt.o dumpstack.o
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -5,6 +5,12 @@ CFLAGS_x86.o := -I.
CFLAGS_svm.o := -I.
CFLAGS_vmx.o := -I.
+ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+CFLAGS_x86.o += -O2
+CFLAGS_emulate.o += -O2
+CFLAGS_svm.o += -O2
+endif
+
kvm-y += $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
coalesced_mmio.o irq_comm.o eventfd.o \
assigned-dev.o)
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -2,6 +2,10 @@
# Makefile for x86 specific library files.
#
+ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+CFLAGS_memmove_64.o += -O2
+endif
+
inat_tables_script = $(srctree)/arch/x86/tools/gen-insn-attr-x86.awk
inat_tables_maps = $(srctree)/arch/x86/lib/x86-opcode-map.txt
quiet_cmd_inat_tables = GEN $@
--- a/arch/x86/power/Makefile
+++ b/arch/x86/power/Makefile
@@ -3,5 +3,9 @@
nostackp := $(call cc-option, -fno-stack-protector)
CFLAGS_cpu.o := $(nostackp)
+ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+CFLAGS_cpu.o += -O2
+endif
+
obj-$(CONFIG_PM_SLEEP) += cpu.o
obj-$(CONFIG_HIBERNATION) += hibernate_$(BITS).o hibernate_asm_$(BITS).o
--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -2,6 +2,10 @@
# Cryptographic API
#
+ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+CFLAGS_xor.o += -O2
+endif
+
obj-$(CONFIG_CRYPTO) += crypto.o
crypto-y := api.o cipher.o compress.o
--- a/drivers/char/mwave/Makefile
+++ b/drivers/char/mwave/Makefile
@@ -4,6 +4,10 @@
# See the README file in this directory for more info. <paulsch@...ibm.com>
#
+ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+CFLAGS_smapi.o += -O2
+endif
+
obj-$(CONFIG_MWAVE) += mwave.o
mwave-y := mwavedd.o smapi.o tp3780i.o 3780i.o
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -2,6 +2,10 @@
# Makefile for the drm device driver. This driver provides support for the
# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
+ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+CFLAGS_i915_gem.o += -O2
+endif
+
ccflags-y := -Iinclude/drm
i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o \
i915_debugfs.o \
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1221,7 +1221,11 @@ extern int intel_setup_gmbus(struct drm_
extern void intel_teardown_gmbus(struct drm_device *dev);
extern void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed);
extern void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit);
+#ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+static inline bool intel_gmbus_is_forced_bit(struct i2c_adapter *adapter)
+#else
extern inline bool intel_gmbus_is_forced_bit(struct i2c_adapter *adapter)
+#endif
{
return container_of(adapter, struct intel_gmbus, adapter)->force_bit;
}
--- a/drivers/gpu/drm/nouveau/Makefile
+++ b/drivers/gpu/drm/nouveau/Makefile
@@ -2,6 +2,10 @@
# Makefile for the drm device driver. This driver provides support for the
# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
+ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+CFLAGS_nv50_instmem.o += -O2
+endif
+
ccflags-y := -Iinclude/drm
nouveau-y := nouveau_drv.o nouveau_state.o nouveau_channel.o nouveau_mem.o \
nouveau_object.o nouveau_irq.o nouveau_notifier.o \
--- a/drivers/gpu/drm/radeon/Makefile
+++ b/drivers/gpu/drm/radeon/Makefile
@@ -2,6 +2,10 @@
# Makefile for the drm device driver. This driver provides support for the
# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
+ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+CFLAGS_radeon_gem.o += -O2
+endif
+
ccflags-y := -Iinclude/drm
hostprogs-y := mkregtable
--- a/drivers/infiniband/hw/qib/Makefile
+++ b/drivers/infiniband/hw/qib/Makefile
@@ -1,5 +1,9 @@
obj-$(CONFIG_INFINIBAND_QIB) += ib_qib.o
+ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+CFLAGS_qib_iba7322.o += -O2
+endif
+
ib_qib-y := qib_cq.o qib_diag.o qib_dma.o qib_driver.o qib_eeprom.o \
qib_file_ops.o qib_fs.o qib_init.o qib_intr.o qib_keys.o \
qib_mad.o qib_mmap.o qib_mr.o qib_pcie.o qib_pio_copy.o \
--- a/drivers/net/can/sja1000/Makefile
+++ b/drivers/net/can/sja1000/Makefile
@@ -2,6 +2,10 @@
# Makefile for the SJA1000 CAN controller drivers.
#
+ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+CFLAGS_kvaser_pci.o += -O2
+endif
+
obj-$(CONFIG_CAN_SJA1000) += sja1000.o
obj-$(CONFIG_CAN_SJA1000_ISA) += sja1000_isa.o
obj-$(CONFIG_CAN_SJA1000_PLATFORM) += sja1000_platform.o
--- a/drivers/staging/comedi/drivers/Makefile
+++ b/drivers/staging/comedi/drivers/Makefile
@@ -1,6 +1,10 @@
# Makefile for individual comedi drivers
#
+ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+CFLAGS_cb_pcidas64.o += -O2
+endif
+
# Comedi "helper" modules
obj-$(CONFIG_COMEDI) += pcm_common.o
--- a/drivers/staging/et131x/et1310_address_map.h
+++ b/drivers/staging/et131x/et1310_address_map.h
@@ -212,12 +212,20 @@ struct global_regs { /* Location: */
#define INDEX10(x) ((x) & ET_DMA10_MASK)
#define INDEX4(x) ((x) & ET_DMA4_MASK)
+#ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+static inline void add_10bit(u32 *v, int n)
+#else
extern inline void add_10bit(u32 *v, int n)
+#endif
{
*v = INDEX10(*v + n) | (*v & ET_DMA10_WRAP);
}
+#ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+static inline void add_12bit(u32 *v, int n)
+#else
extern inline void add_12bit(u32 *v, int n)
+#endif
{
*v = INDEX12(*v + n) | (*v & ET_DMA12_WRAP);
}
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
@@ -1221,7 +1221,11 @@ static inline void *ieee80211_priv(struc
return ((struct ieee80211_device *)netdev_priv(dev))->priv;
}
+#ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+static inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+#else
extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+#endif
{
/* Single white space is for Linksys APs */
if (essid_len == 1 && essid[0] == ' ')
@@ -1263,7 +1267,11 @@ extern inline int ieee80211_is_valid_mod
return 0;
}
+#ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+static inline int ieee80211_get_hdrlen(u16 fc)
+#else
extern inline int ieee80211_get_hdrlen(u16 fc)
+#endif
{
int hdrlen = 24;
--- a/drivers/staging/wlags49_h2/wl_internal.h
+++ b/drivers/staging/wlags49_h2/wl_internal.h
@@ -1022,8 +1022,11 @@ static inline void wl_unlock(struct wl_p
/********************************************************************/
/* Interrupt enable disable functions */
/********************************************************************/
-
+#ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+static inline void wl_act_int_on(struct wl_private *lp)
+#else
extern inline void wl_act_int_on(struct wl_private *lp)
+#endif
{
/*
* Only do something when the driver is handling
@@ -1035,7 +1038,11 @@ extern inline void wl_act_int_on(struct
}
}
+#ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+static inline void wl_act_int_off(struct wl_private *lp)
+#else
extern inline void wl_act_int_off(struct wl_private *lp)
+#endif
{
/*
* Only do something when the driver is handling
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -376,10 +376,12 @@ int __init loopback_add(struct usb_compo
sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
/* support OTG systems */
+#ifdef CONFIG_USB_OTG
if (gadget_is_otg(cdev->gadget)) {
loopback_driver.descriptors = otg_desc;
loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
+#endif
return usb_add_config(cdev, &loopback_driver, loopback_bind_config);
}
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -526,10 +526,12 @@ int __init sourcesink_add(struct usb_com
sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
/* support OTG systems */
+#ifdef CONFIG_USB_OTG
if (gadget_is_otg(cdev->gadget)) {
sourcesink_driver.descriptors = otg_desc;
sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
+#endif
return usb_add_config(cdev, &sourcesink_driver, sourcesink_bind_config);
}
--- a/drivers/usb/gadget/g_zero.h
+++ b/drivers/usb/gadget/g_zero.h
@@ -10,7 +10,9 @@
/* global state */
extern unsigned buflen;
+#ifdef CONFIG_USB_OTG
extern const struct usb_descriptor_header *otg_desc[];
+#endif
/* common utilities */
struct usb_request *alloc_ep_req(struct usb_ep *ep);
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -4,6 +4,10 @@
ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
+ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+CFLAGS_ehci-hcd.o += -O2
+endif
+
isp1760-y := isp1760-hcd.o isp1760-if.o
fhci-y := fhci-hcd.o fhci-hub.o fhci-q.o
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -13,6 +13,11 @@ obj-y := open.o read_write.o file_table.
pnode.o drop_caches.o splice.o sync.o utimes.o \
stack.o fs_struct.o statfs.o
+ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+CFLAGS_compat_ioctl.o += -O2
+CFLAGS_binfmt_elf.o += -O2
+endif
+
ifeq ($(CONFIG_BLOCK),y)
obj-y += buffer.o bio.o block_dev.o direct-io.o mpage.o ioprio.o
else
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -289,8 +289,10 @@ static inline pgoff_t linear_page_index(
unsigned long address)
{
pgoff_t pgoff;
+#ifdef CONFIG_HUGETLBFS
if (unlikely(is_vm_hugetlb_page(vma)))
return linear_hugepage_index(vma, address);
+#endif
pgoff = (address - vma->vm_start) >> PAGE_SHIFT;
pgoff += vma->vm_pgoff;
return pgoff >> (PAGE_CACHE_SHIFT - PAGE_SHIFT);
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -886,6 +886,7 @@ endif
config CC_OPTIMIZE_FOR_SIZE
bool "Optimize for size"
+ depends on !CC_CLOSE_OPTIMIZATION
default y
help
Enabling this option will pass "-Os" instead of "-O2" to gcc
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -2,6 +2,10 @@
# Makefile for the linux kernel.
#
+ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+CFLAGS_sched.o += -O2
+endif
+
obj-y = sched.o fork.o exec_domain.o panic.o printk.o \
cpu.o exit.o itimer.o time.o softirq.o resource.o \
sysctl.o sysctl_binary.o capability.o ptrace.o timer.o user.o \
--- a/kernel/kfifo.c
+++ b/kernel/kfifo.c
@@ -402,6 +402,9 @@ unsigned int __kfifo_max_r(unsigned int
return max;
return len;
}
+#ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+EXPORT_SYMBOL(__kfifo_max_r);
+#endif
#define __KFIFO_PEEK(data, out, mask) \
((data)[(out) & (mask)])
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -136,6 +136,14 @@ config DEBUG_SECTION_MISMATCH
- Enable verbose reporting from modpost to help solving
the section mismatches reported.
+config CC_CLOSE_OPTIMIZATION
+ bool "Close GCC optimization"
+ default n
+ help
+ Enabling this option will let gcc build kernel without "-O2".
+
+ If unsure, say N.
+
config DEBUG_KERNEL
bool "Kernel debugging"
help
--- a/lib/raid6/Makefile
+++ b/lib/raid6/Makefile
@@ -1,3 +1,9 @@
+ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+CFLAGS_mmx.o += -O2
+CFLAGS_sse1.o += -O2
+CFLAGS_sse2.o += -O2
+endif
+
obj-$(CONFIG_RAID6_PQ) += raid6_pq.o
raid6_pq-y += algos.o recov.o tables.o int1.o int2.o int4.o \
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -2,6 +2,12 @@
# Makefile for the linux memory manager.
#
+ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+CFLAGS_slob.o += -O2
+CFLAGS_slab.o += -O2
+CFLAGS_slub.o += -O2
+endif
+
mmu-y := nommu.o
mmu-$(CONFIG_MMU) := fremap.o highmem.o madvise.o memory.o mincore.o \
mlock.o mmap.o mprotect.o mremap.o msync.o rmap.o \
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1317,8 +1317,10 @@ struct page *follow_page(struct vm_area_
spin_unlock(&mm->page_table_lock);
wait_split_huge_page(vma->anon_vma, pmd);
} else {
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
page = follow_trans_huge_pmd(mm, address,
pmd, flags);
+#endif
spin_unlock(&mm->page_table_lock);
goto out;
}
@@ -2775,7 +2777,9 @@ static int do_swap_page(struct mm_struct
if (ksm_might_need_to_copy(page, vma, address)) {
swapcache = page;
+#ifdef CONFIG_KSM
page = ksm_does_need_to_copy(page, vma, address);
+#endif
if (unlikely(!page)) {
ret = VM_FAULT_OOM;
@@ -3314,11 +3318,13 @@ int handle_mm_fault(struct mm_struct *mm
pmd_t orig_pmd = *pmd;
barrier();
if (pmd_trans_huge(orig_pmd)) {
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
if (flags & FAULT_FLAG_WRITE &&
!pmd_write(orig_pmd) &&
!pmd_trans_splitting(orig_pmd))
return do_huge_pmd_wp_page(mm, vma, address,
pmd, orig_pmd);
+#endif
return 0;
}
}
--- a/mm/mincore.c
+++ b/mm/mincore.c
@@ -155,10 +155,12 @@ static void mincore_pmd_range(struct vm_
do {
next = pmd_addr_end(addr, end);
if (pmd_trans_huge(*pmd)) {
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
if (mincore_huge_pmd(vma, pmd, addr, next, vec)) {
vec += (next - addr) >> PAGE_SHIFT;
continue;
}
+#endif
/* fall through */
}
if (pmd_none_or_clear_bad(pmd))
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -1886,7 +1886,11 @@ void __init percpu_init_late(void)
int *map;
const size_t size = PERCPU_DYNAMIC_EARLY_SLOTS * sizeof(map[0]);
+#ifdef CONFIG_CC_CLOSE_OPTIMIZATION
+ BUG_ON(size > PAGE_SIZE);
+#else
BUILD_BUG_ON(size > PAGE_SIZE);
+#endif
map = pcpu_mem_alloc(size);
BUG_ON(!map);
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -515,6 +515,7 @@ int page_referenced_one(struct page *pag
referenced++;
if (unlikely(PageTransHuge(page))) {
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
pmd_t *pmd;
spin_lock(&mm->page_table_lock);
@@ -524,6 +525,7 @@ int page_referenced_one(struct page *pag
pmdp_clear_flush_young_notify(vma, address, pmd))
referenced++;
spin_unlock(&mm->page_table_lock);
+#endif
} else {
pte_t *pte;
spinlock_t *ptl;
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -699,6 +699,7 @@ static void sta_apply_parameters(struct
params->ht_capa,
&sta->sta.ht_cap);
+#ifdef CONFIG_MAC80211_MESH
if (ieee80211_vif_is_mesh(&sdata->vif) && params->plink_action) {
switch (params->plink_action) {
case PLINK_ACTION_OPEN:
@@ -709,6 +710,7 @@ static void sta_apply_parameters(struct
break;
}
}
+#endif
}
static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -620,8 +620,10 @@ static void ieee80211_teardown_sdata(str
__skb_queue_purge(&sdata->fragments[i].skb_list);
sdata->fragment_next = 0;
+#ifdef CONFIG_MAC80211_MESH
if (ieee80211_vif_is_mesh(&sdata->vif))
mesh_rmc_free(sdata);
+#endif
flushed = sta_info_flush(local, sdata);
WARN_ON(flushed);
@@ -797,7 +799,9 @@ static void ieee80211_iface_work(struct
case NL80211_IFTYPE_MESH_POINT:
if (!ieee80211_vif_is_mesh(&sdata->vif))
break;
+#ifdef CONFIG_MAC80211_MESH
ieee80211_mesh_rx_queued_mgmt(sdata, skb);
+#endif
break;
default:
WARN(1, "frame for unexpected interface type");
@@ -818,7 +822,9 @@ static void ieee80211_iface_work(struct
case NL80211_IFTYPE_MESH_POINT:
if (!ieee80211_vif_is_mesh(&sdata->vif))
break;
+#ifdef CONFIG_MAC80211_MESH
ieee80211_mesh_work(sdata);
+#endif
break;
default:
break;
@@ -872,8 +878,10 @@ static void ieee80211_setup_sdata(struct
ieee80211_ibss_setup_sdata(sdata);
break;
case NL80211_IFTYPE_MESH_POINT:
+#ifdef CONFIG_MAC80211_MESH
if (ieee80211_vif_is_mesh(&sdata->vif))
ieee80211_mesh_init_sdata(sdata);
+#endif
break;
case NL80211_IFTYPE_MONITOR:
sdata->dev->type = ARPHRD_IEEE80211_RADIOTAP;
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -189,8 +189,10 @@ int ieee80211_fill_mesh_addresses(struct
int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr,
struct ieee80211_sub_if_data *sdata, char *addr4or5,
char *addr6);
+#ifdef CONFIG_MAC80211_MESH
int mesh_rmc_check(u8 *addr, struct ieee80211s_hdr *mesh_hdr,
struct ieee80211_sub_if_data *sdata);
+#endif
bool mesh_matches_local(struct ieee802_11_elems *ie,
struct ieee80211_sub_if_data *sdata);
void mesh_ids_set_default(struct ieee80211_if_mesh *mesh);
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -453,6 +453,14 @@ static int ieee80211_get_mmie_keyidx(str
}
+#ifndef CONFIG_MAC80211_MESH
+static int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr,
+ struct ieee80211_sub_if_data *sdata)
+{
+ return 0;
+}
+#endif
+
static ieee80211_rx_result
ieee80211_rx_mesh_check(struct ieee80211_rx_data *rx)
{
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -470,8 +470,10 @@ int sta_info_insert_rcu(struct sta_info
rcu_read_lock();
mutex_unlock(&local->sta_mtx);
+#ifdef CONFIG_MAC80211_MESH
if (ieee80211_vif_is_mesh(&sdata->vif))
mesh_accept_plinks_update(sdata);
+#endif
return 0;
out_free:
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -247,8 +247,10 @@ void ieee80211_tx_status(struct ieee8021
}
rate_control_tx_status(local, sband, sta, skb);
+#ifdef CONFIG_MAC80211_MESH
if (ieee80211_vif_is_mesh(&sta->sdata->vif))
ieee80211s_update_metric(local, sta, skb);
+#endif
if (!(info->flags & IEEE80211_TX_CTL_INJECTED) && acked)
ieee80211_frame_acked(sta, skb);
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1638,6 +1638,7 @@ static void ieee80211_xmit(struct ieee80
hdr = (struct ieee80211_hdr *) skb->data;
info->control.vif = &sdata->vif;
+#ifdef CONFIG_MAC80211_MESH
if (ieee80211_vif_is_mesh(&sdata->vif) &&
ieee80211_is_data(hdr->frame_control) &&
!is_multicast_ether_addr(hdr->addr1))
@@ -1646,6 +1647,7 @@ static void ieee80211_xmit(struct ieee80
rcu_read_unlock();
return;
}
+#endif
ieee80211_set_qos_hdr(local, skb);
ieee80211_tx(sdata, skb, false);
@@ -2322,7 +2324,9 @@ struct sk_buff *ieee80211_beacon_get_tim
*pos++ = WLAN_EID_SSID;
*pos++ = 0x0;
+#ifdef CONFIG_MAC80211_MESH
mesh_mgmt_ies_add(skb, sdata);
+#endif
} else {
WARN_ON(1);
goto out;
--- a/net/netfilter/nf_conntrack_pptp.c
+++ b/net/netfilter/nf_conntrack_pptp.c
@@ -67,7 +67,8 @@ void
struct nf_conntrack_expect *exp) __read_mostly;
EXPORT_SYMBOL_GPL(nf_nat_pptp_hook_expectfn);
-#if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG)
+#if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG) \
+ || defined(CONFIG_CC_CLOSE_OPTIMIZATION)
/* PptpControlMessageType names */
const char *const pptp_msg_name[] = {
"UNKNOWN_MESSAGE",
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists