[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20110124225323.GA5701@morell.nvidia.com>
Date: Mon, 24 Jan 2011 14:53:23 -0800
From: rmorell@...dia.com
To: Alan Stern <stern@...land.harvard.edu>
Cc: David Brownell <dbrownell@...rs.sourceforge.net>,
Greg Kroah-Hartman <gregkh@...e.de>,
Benoit Goby <benoit@...roid.com>,
Sarah Sharp <sarah.a.sharp@...ux.intel.com>,
Matthew Wilcox <willy@...ux.intel.com>,
Ming Lei <tom.leiming@...il.com>,
Jacob Pan <jacob.jun.pan@...el.com>,
Oliver Neukum <oliver@...kum.org>,
Olof Johansson <olof@...om.net>,
Erik Gilling <konkers@...roid.com>,
Colin Cross <ccross@...roid.com>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-tegra@...r.kernel.org" <linux-tegra@...r.kernel.org>
Subject: Re: [PATCH 2/2] USB: ehci: tegra: Align DMA transfers to 32 bytes
On Mon, Jan 24, 2011 at 08:36:55AM -0800, Alan Stern wrote:
> On Thu, 20 Jan 2011, Robert Morell wrote:
>
> > The Tegra2 USB controller doesn't properly deal with misaligned DMA
> > buffers, causing corruption. This is especially prevalent with USB
> > network adapters, where skbuff alignment is often in the middle of a
> > 4-byte dword.
> >
> > To avoid this, allocate a temporary buffer for the DMA if the provided
> > buffer isn't sufficiently aligned.
> >
> > Signed-off-by: Robert Morell <rmorell@...dia.com>
> > ---
> > drivers/usb/host/ehci-tegra.c | 92 +++++++++++++++++++++++++++++++++++++++++
> > 1 files changed, 92 insertions(+), 0 deletions(-)
> >
> > diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
> > index 2341904..7cdfc65 100644
> > --- a/drivers/usb/host/ehci-tegra.c
> > +++ b/drivers/usb/host/ehci-tegra.c
> > @@ -32,6 +32,8 @@
> > #define TEGRA_USB_USBMODE_HOST (3 << 0)
> > #define TEGRA_USB_PORTSC1_PTC(x) (((x) & 0xf) << 16)
> >
> > +#define TEGRA_USB_DMA_ALIGN 32
> > +
> > struct tegra_ehci_context {
> > bool valid;
> > u32 command;
> > @@ -461,6 +463,94 @@ static int tegra_ehci_bus_resume(struct usb_hcd *hcd)
> > }
> > #endif
> >
> > +struct temp_buffer {
> > + void *kmalloc_ptr;
> > + void *old_xfer_buffer;
> > + u8 data[0];
> > +};
> > +
> > +static void free_temp_buffer(struct urb *urb, int status)
> > +{
> > + enum dma_data_direction dir;
> > + struct temp_buffer *temp;
> > +
> > + if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER))
> > + return;
> > +
> > + dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
> > +
> > + temp = container_of(urb->transfer_buffer, struct temp_buffer,
> > + data);
> > +
> > + if (dir == DMA_FROM_DEVICE && !status)
> > + memcpy(temp->old_xfer_buffer, temp->data,
> > + urb->transfer_buffer_length);
>
> Even if status is nonzero, there may be valid data in the buffer. You
> should skip that test.
Thanks for looking, Alan. I added that test based on earlier feedback.
I think the big concern here is security: if the URB fails in such a way
that the buffer is not overwritten, then we may copy out freed kernel
data to userspace.
Are there specific status codes that I can check for here? I guess the
only other option is to remove the direction check from the alloc path
or alloc with GFP_ZERO.
Thanks,
Robert
> No other problems that I can see.
>
> Alan Stern
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists