| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1295843342-1122-8-git-send-email-bigeasy@linutronix.de>
Date: Mon, 24 Jan 2011 09:58:55 +0530
From: Sebastian Andrzej Siewior <bigeasy@...utronix.de>
To: linux-kernel@...r.kernel.org
Cc: sodaville@...utronix.de, x86@...nel.org,
devicetree-discuss@...ts.ozlabs.org,
Sebastian Andrzej Siewior <sebastian@...akpoint.cc>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>
Subject: [PATCH OF 07/14] of: move of_irq_map_pci() into generic code
From: Sebastian Andrzej Siewior <sebastian@...akpoint.cc>
There is a tiny difference between PPC32 and PPC64. Microblaze uses the
PPC32 variant.
Cc: devicetree-discuss@...ts.ozlabs.org
Cc: Benjamin Herrenschmidt <benh@...nel.crashing.org>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@...akpoint.cc>
---
arch/microblaze/include/asm/pci-bridge.h | 12 ++++
arch/microblaze/include/asm/prom.h | 15 -----
arch/microblaze/kernel/prom_parse.c | 77 ---------------------------
arch/microblaze/pci/pci-common.c | 1 +
arch/powerpc/include/asm/pci-bridge.h | 10 ++++
arch/powerpc/include/asm/prom.h | 15 -----
arch/powerpc/kernel/pci-common.c | 1 +
arch/powerpc/kernel/prom_parse.c | 84 ------------------------------
drivers/of/Kconfig | 6 ++
drivers/of/Makefile | 1 +
drivers/of/of_pci.c | 80 ++++++++++++++++++++++++++++
include/linux/of_pci.h | 20 +++++++
12 files changed, 131 insertions(+), 191 deletions(-)
create mode 100644 drivers/of/of_pci.c
create mode 100644 include/linux/of_pci.h
diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
index 0c68764..c2a40a4 100644
--- a/arch/microblaze/include/asm/pci-bridge.h
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -104,11 +104,22 @@ struct pci_controller {
int global_number; /* PCI domain number */
};
+#ifdef CONFIG_PCI
static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
{
return bus->sysdata;
}
+static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
+{
+ struct pci_controller *host;
+
+ if (bus->self)
+ return pci_device_to_OF_node(bus->self);
+ host = pci_bus_to_host(bus);
+ return host ? host->dn : NULL;
+}
+
static inline int isa_vaddr_is_ioport(void __iomem *address)
{
/* No specific ISA handling on ppc32 at this stage, it
@@ -116,6 +127,7 @@ static inline int isa_vaddr_is_ioport(void __iomem *address)
*/
return 0;
}
+#endif
/* These are used for config access before all the PCI probing
has been done. */
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index 2e72af0..d0890d3 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -64,21 +64,6 @@ extern void kdump_move_device_tree(void);
/* CPU OF node matching */
struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
-/**
- * of_irq_map_pci - Resolve the interrupt for a PCI device
- * @pdev: the device whose interrupt is to be resolved
- * @out_irq: structure of_irq filled by this function
- *
- * This function resolves the PCI interrupt for a given PCI device. If a
- * device-node exists for a given pci_dev, it will use normal OF tree
- * walking. If not, it will implement standard swizzling and walk up the
- * PCI tree until an device-node is found, at which point it will finish
- * resolving using the OF tree walking.
- */
-struct pci_dev;
-struct of_irq;
-extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
-
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c
index 9ae24f4..47187cc 100644
--- a/arch/microblaze/kernel/prom_parse.c
+++ b/arch/microblaze/kernel/prom_parse.c
@@ -2,88 +2,11 @@
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/pci_regs.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/etherdevice.h>
#include <linux/of_address.h>
#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-
-#ifdef CONFIG_PCI
-int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
-{
- struct device_node *dn, *ppnode;
- struct pci_dev *ppdev;
- u32 lspec;
- u32 laddr[3];
- u8 pin;
- int rc;
-
- /* Check if we have a device node, if yes, fallback to standard OF
- * parsing
- */
- dn = pci_device_to_OF_node(pdev);
- if (dn)
- return of_irq_map_one(dn, 0, out_irq);
-
- /* Ok, we don't, time to have fun. Let's start by building up an
- * interrupt spec. we assume #interrupt-cells is 1, which is standard
- * for PCI. If you do different, then don't use that routine.
- */
- rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
- if (rc != 0)
- return rc;
- /* No pin, exit */
- if (pin == 0)
- return -ENODEV;
-
- /* Now we walk up the PCI tree */
- lspec = pin;
- for (;;) {
- /* Get the pci_dev of our parent */
- ppdev = pdev->bus->self;
-
- /* Ouch, it's a host bridge... */
- if (ppdev == NULL) {
- struct pci_controller *host;
- host = pci_bus_to_host(pdev->bus);
- ppnode = host ? host->dn : NULL;
- /* No node for host bridge ? give up */
- if (ppnode == NULL)
- return -EINVAL;
- } else
- /* We found a P2P bridge, check if it has a node */
- ppnode = pci_device_to_OF_node(ppdev);
-
- /* Ok, we have found a parent with a device-node, hand over to
- * the OF parsing code.
- * We build a unit address from the linux device to be used for
- * resolution. Note that we use the linux bus number which may
- * not match your firmware bus numbering.
- * Fortunately, in most cases, interrupt-map-mask doesn't
- * include the bus number as part of the matching.
- * You should still be careful about that though if you intend
- * to rely on this function (you ship a firmware that doesn't
- * create device nodes for all PCI devices).
- */
- if (ppnode)
- break;
-
- /* We can only get here if we hit a P2P bridge with no node,
- * let's do standard swizzling and try again
- */
- lspec = pci_swizzle_interrupt_pin(pdev, lspec);
- pdev = ppdev;
- }
-
- laddr[0] = (pdev->bus->number << 16)
- | (pdev->devfn << 8);
- laddr[1] = laddr[2] = 0;
- return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
-}
-EXPORT_SYMBOL_GPL(of_irq_map_pci);
-#endif /* CONFIG_PCI */
void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
unsigned long *busno, unsigned long *phys, unsigned long *size)
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index e363615..1e01a12 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -29,6 +29,7 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_pci.h>
#include <asm/processor.h>
#include <asm/io.h>
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 51e9e6f..edeb80f 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -171,6 +171,16 @@ static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
return bus->sysdata;
}
+static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
+{
+ struct pci_controller *host;
+
+ if (bus->self)
+ return pci_device_to_OF_node(bus->self);
+ host = pci_bus_to_host(bus);
+ return host ? host->dn : NULL;
+}
+
static inline int isa_vaddr_is_ioport(void __iomem *address)
{
/* No specific ISA handling on ppc32 at this stage, it
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index d727575..c189aa5 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -70,21 +70,6 @@ static inline int of_node_to_nid(struct device_node *device) { return 0; }
#endif
#define of_node_to_nid of_node_to_nid
-/**
- * of_irq_map_pci - Resolve the interrupt for a PCI device
- * @pdev: the device whose interrupt is to be resolved
- * @out_irq: structure of_irq filled by this function
- *
- * This function resolves the PCI interrupt for a given PCI device. If a
- * device-node exists for a given pci_dev, it will use normal OF tree
- * walking. If not, it will implement standard swizzling and walk up the
- * PCI tree until an device-node is found, at which point it will finish
- * resolving using the OF tree walking.
- */
-struct pci_dev;
-struct of_irq;
-extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
-
extern void of_instantiate_rtc(void);
/* These includes are put at the bottom because they may contain things
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 10a44e6..eb341be 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -22,6 +22,7 @@
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/of_address.h>
+#include <linux/of_pci.h>
#include <linux/mm.h>
#include <linux/list.h>
#include <linux/syscalls.h>
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index c2b7a07..47187cc 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -2,95 +2,11 @@
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/pci_regs.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/etherdevice.h>
#include <linux/of_address.h>
#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-
-#ifdef CONFIG_PCI
-int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
-{
- struct device_node *dn, *ppnode;
- struct pci_dev *ppdev;
- u32 lspec;
- u32 laddr[3];
- u8 pin;
- int rc;
-
- /* Check if we have a device node, if yes, fallback to standard OF
- * parsing
- */
- dn = pci_device_to_OF_node(pdev);
- if (dn) {
- rc = of_irq_map_one(dn, 0, out_irq);
- if (!rc)
- return rc;
- }
-
- /* Ok, we don't, time to have fun. Let's start by building up an
- * interrupt spec. we assume #interrupt-cells is 1, which is standard
- * for PCI. If you do different, then don't use that routine.
- */
- rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
- if (rc != 0)
- return rc;
- /* No pin, exit */
- if (pin == 0)
- return -ENODEV;
-
- /* Now we walk up the PCI tree */
- lspec = pin;
- for (;;) {
- /* Get the pci_dev of our parent */
- ppdev = pdev->bus->self;
-
- /* Ouch, it's a host bridge... */
- if (ppdev == NULL) {
-#ifdef CONFIG_PPC64
- ppnode = pci_bus_to_OF_node(pdev->bus);
-#else
- struct pci_controller *host;
- host = pci_bus_to_host(pdev->bus);
- ppnode = host ? host->dn : NULL;
-#endif
- /* No node for host bridge ? give up */
- if (ppnode == NULL)
- return -EINVAL;
- } else
- /* We found a P2P bridge, check if it has a node */
- ppnode = pci_device_to_OF_node(ppdev);
-
- /* Ok, we have found a parent with a device-node, hand over to
- * the OF parsing code.
- * We build a unit address from the linux device to be used for
- * resolution. Note that we use the linux bus number which may
- * not match your firmware bus numbering.
- * Fortunately, in most cases, interrupt-map-mask doesn't include
- * the bus number as part of the matching.
- * You should still be careful about that though if you intend
- * to rely on this function (you ship a firmware that doesn't
- * create device nodes for all PCI devices).
- */
- if (ppnode)
- break;
-
- /* We can only get here if we hit a P2P bridge with no node,
- * let's do standard swizzling and try again
- */
- lspec = pci_swizzle_interrupt_pin(pdev, lspec);
- pdev = ppdev;
- }
-
- laddr[0] = (pdev->bus->number << 16)
- | (pdev->devfn << 8);
- laddr[1] = laddr[2] = 0;
- return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
-}
-EXPORT_SYMBOL_GPL(of_irq_map_pci);
-#endif /* CONFIG_PCI */
void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
unsigned long *busno, unsigned long *phys, unsigned long *size)
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 3c6e100..c71cff1 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -69,4 +69,10 @@ config OF_MDIO
help
OpenFirmware MDIO bus (Ethernet PHY) accessors
+config OF_PCI
+ def_tristate PCI
+ depends on PCI && !SPARC
+ help
+ OpenFirmware PCI bus accessors
+
endmenu # OF
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index 3ab21a0..f7861ed 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_OF_I2C) += of_i2c.o
obj-$(CONFIG_OF_NET) += of_net.o
obj-$(CONFIG_OF_SPI) += of_spi.o
obj-$(CONFIG_OF_MDIO) += of_mdio.o
+obj-$(CONFIG_OF_PCI) += of_pci.o
diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
new file mode 100644
index 0000000..dd862d2
--- /dev/null
+++ b/drivers/of/of_pci.c
@@ -0,0 +1,80 @@
+#include <linux/kernel.h>
+#include <linux/of_pci.h>
+#include <asm/prom.h>
+
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+{
+ struct device_node *dn, *ppnode;
+ struct pci_dev *ppdev;
+ u32 lspec;
+ __be32 lspec_be;
+ __be32 laddr[3];
+ u8 pin;
+ int rc;
+
+ /* Check if we have a device node, if yes, fallback to standard OF
+ * parsing
+ */
+ dn = pci_device_to_OF_node(pdev);
+ if (dn) {
+ rc = of_irq_map_one(dn, 0, out_irq);
+ if (!rc)
+ return rc;
+ }
+
+ /* Ok, we don't, time to have fun. Let's start by building up an
+ * interrupt spec. we assume #interrupt-cells is 1, which is standard
+ * for PCI. If you do different, then don't use that routine.
+ */
+ rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
+ if (rc != 0)
+ return rc;
+ /* No pin, exit */
+ if (pin == 0)
+ return -ENODEV;
+
+ /* Now we walk up the PCI tree */
+ lspec = pin;
+ for (;;) {
+ /* Get the pci_dev of our parent */
+ ppdev = pdev->bus->self;
+
+ /* Ouch, it's a host bridge... */
+ if (ppdev == NULL) {
+ ppnode = pci_bus_to_OF_node(pdev->bus);
+
+ /* No node for host bridge ? give up */
+ if (ppnode == NULL)
+ return -EINVAL;
+ } else {
+ /* We found a P2P bridge, check if it has a node */
+ ppnode = pci_device_to_OF_node(ppdev);
+ }
+
+ /* Ok, we have found a parent with a device-node, hand over to
+ * the OF parsing code.
+ * We build a unit address from the linux device to be used for
+ * resolution. Note that we use the linux bus number which may
+ * not match your firmware bus numbering.
+ * Fortunately, in most cases, interrupt-map-mask doesn't
+ * include the bus number as part of the matching.
+ * You should still be careful about that though if you intend
+ * to rely on this function (you ship a firmware that doesn't
+ * create device nodes for all PCI devices).
+ */
+ if (ppnode)
+ break;
+
+ /* We can only get here if we hit a P2P bridge with no node,
+ * let's do standard swizzling and try again
+ */
+ lspec = pci_swizzle_interrupt_pin(pdev, lspec);
+ pdev = ppdev;
+ }
+
+ lspec_be = cpu_to_be32(lspec);
+ laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
+ laddr[1] = laddr[2] = cpu_to_be32(0);
+ return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq);
+}
+EXPORT_SYMBOL_GPL(of_irq_map_pci);
diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
new file mode 100644
index 0000000..9b0ba67
--- /dev/null
+++ b/include/linux/of_pci.h
@@ -0,0 +1,20 @@
+#ifndef __OF_PCI_H
+#define __OF_PCI_H
+
+#include <linux/pci.h>
+
+/**
+ * of_irq_map_pci - Resolve the interrupt for a PCI device
+ * @pdev: the device whose interrupt is to be resolved
+ * @out_irq: structure of_irq filled by this function
+ *
+ * This function resolves the PCI interrupt for a given PCI device. If a
+ * device-node exists for a given pci_dev, it will use normal OF tree
+ * walking. If not, it will implement standard swizzling and walk up the
+ * PCI tree until an device-node is found, at which point it will finish
+ * resolving using the OF tree walking.
+ */
+struct pci_dev;
+struct of_irq;
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
+#endif
--
1.7.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists