| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20110125161052.GA20105@aepfle.de>
Date: Tue, 25 Jan 2011 17:10:52 +0100
From: Olaf Hering <olaf@...fle.de>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org
Subject: [PATCH] crash_dump: export is_kdump_kernel to modules, consolidate
elfcorehdr_addr, setup_elfcorehdr and saved_max_pfn
The Xen PV drivers in a crashed HVM guest can not connect to the dom0
backend drivers because both frontend and backend drivers are still in
connected state. To run the connection reset function only in case of a
crashdump, the is_kdump_kernel() function needs to be available for the
PV driver modules.
Consolidate elfcorehdr_addr, setup_elfcorehdr and saved_max_pfn into
kernel/crash_dump.c Also export elfcorehdr_addr to make
is_kdump_kernel() usable for modules.
Leave 'elfcorehdr' as early_param(). This changes powerpc from
__setup() to early_param(). It adds an address range check from x86
also on ia64 and powerpc.
Signed-off-by: Olaf Hering <olaf@...fle.de>
---
arch/arm/kernel/crash_dump.c | 3 ---
arch/arm/kernel/setup.c | 24 ------------------------
arch/ia64/kernel/crash_dump.c | 3 ---
arch/ia64/kernel/efi.c | 1 +
arch/ia64/kernel/setup.c | 18 ------------------
arch/powerpc/kernel/crash_dump.c | 17 -----------------
arch/sh/kernel/crash_dump.c | 22 ----------------------
arch/x86/kernel/crash_dump_32.c | 3 ---
arch/x86/kernel/crash_dump_64.c | 3 ---
arch/x86/kernel/e820.c | 1 +
arch/x86/kernel/setup.c | 22 ----------------------
include/linux/bootmem.h | 4 ----
kernel/Makefile | 1 +
kernel/crash_dump.c | 33 +++++++++++++++++++++++++++++++++
mm/bootmem.c | 8 --------
15 files changed, 36 insertions(+), 127 deletions(-)
--- linux-2.6.38.rc.orig/arch/arm/kernel/crash_dump.c
+++ linux-2.6.38.rc/arch/arm/kernel/crash_dump.c
@@ -18,9 +18,6 @@
#include <linux/uaccess.h>
#include <linux/io.h>
-/* stores the physical address of elf header of crash image */
-unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
-
/**
* copy_oldmem_page() - copy one page from old kernel memory
* @pfn: page frame number to be copied
--- linux-2.6.38.rc.orig/arch/arm/kernel/setup.c
+++ linux-2.6.38.rc/arch/arm/kernel/setup.c
@@ -765,30 +765,6 @@ static void __init reserve_crashkernel(v
static inline void reserve_crashkernel(void) {}
#endif /* CONFIG_KEXEC */
-/*
- * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
- * is_kdump_kernel() to determine if we are booting after a panic. Hence
- * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
- */
-
-#ifdef CONFIG_CRASH_DUMP
-/*
- * elfcorehdr= specifies the location of elf core header stored by the crashed
- * kernel. This option will be passed by kexec loader to the capture kernel.
- */
-static int __init setup_elfcorehdr(char *arg)
-{
- char *end;
-
- if (!arg)
- return -EINVAL;
-
- elfcorehdr_addr = memparse(arg, &end);
- return end > arg ? 0 : -EINVAL;
-}
-early_param("elfcorehdr", setup_elfcorehdr);
-#endif /* CONFIG_CRASH_DUMP */
-
static void __init squash_mem_tags(struct tag *tag)
{
for (; tag->hdr.size; tag = tag_next(tag))
--- linux-2.6.38.rc.orig/arch/ia64/kernel/crash_dump.c
+++ linux-2.6.38.rc/arch/ia64/kernel/crash_dump.c
@@ -13,9 +13,6 @@
#include <asm/page.h>
#include <asm/uaccess.h>
-/* Stores the physical address of elf header of crash image. */
-unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
-
/**
* copy_oldmem_page - copy one page from "oldmem"
* @pfn: page frame number to be copied
--- linux-2.6.38.rc.orig/arch/ia64/kernel/efi.c
+++ linux-2.6.38.rc/arch/ia64/kernel/efi.c
@@ -23,6 +23,7 @@
*/
#include <linux/module.h>
#include <linux/bootmem.h>
+#include <linux/crash_dump.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
--- linux-2.6.38.rc.orig/arch/ia64/kernel/setup.c
+++ linux-2.6.38.rc/arch/ia64/kernel/setup.c
@@ -479,25 +479,7 @@ static __init int setup_nomca(char *s)
}
early_param("nomca", setup_nomca);
-/*
- * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
- * is_kdump_kernel() to determine if we are booting after a panic. Hence
- * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
- */
#ifdef CONFIG_CRASH_DUMP
-/* elfcorehdr= specifies the location of elf core header
- * stored by the crashed kernel.
- */
-static int __init parse_elfcorehdr(char *arg)
-{
- if (!arg)
- return -EINVAL;
-
- elfcorehdr_addr = memparse(arg, &arg);
- return 0;
-}
-early_param("elfcorehdr", parse_elfcorehdr);
-
int __init reserve_elfcorehdr(u64 *start, u64 *end)
{
u64 length;
--- linux-2.6.38.rc.orig/arch/powerpc/kernel/crash_dump.c
+++ linux-2.6.38.rc/arch/powerpc/kernel/crash_dump.c
@@ -28,9 +28,6 @@
#define DBG(fmt...)
#endif
-/* Stores the physical address of elf header of crash image. */
-unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
-
#ifndef CONFIG_RELOCATABLE
void __init reserve_kdump_trampoline(void)
{
@@ -72,20 +69,6 @@ void __init setup_kdump_trampoline(void)
}
#endif /* CONFIG_RELOCATABLE */
-/*
- * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
- * is_kdump_kernel() to determine if we are booting after a panic. Hence
- * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
- */
-static int __init parse_elfcorehdr(char *p)
-{
- if (p)
- elfcorehdr_addr = memparse(p, &p);
-
- return 1;
-}
-__setup("elfcorehdr=", parse_elfcorehdr);
-
static int __init parse_savemaxmem(char *p)
{
if (p)
--- linux-2.6.38.rc.orig/arch/sh/kernel/crash_dump.c
+++ linux-2.6.38.rc/arch/sh/kernel/crash_dump.c
@@ -9,28 +9,6 @@
#include <linux/io.h>
#include <asm/uaccess.h>
-/* Stores the physical address of elf header of crash image. */
-unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
-
-/*
- * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
- * is_kdump_kernel() to determine if we are booting after a panic. Hence
- * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
- *
- * elfcorehdr= specifies the location of elf core header
- * stored by the crashed kernel.
- */
-static int __init parse_elfcorehdr(char *arg)
-{
- if (!arg)
- return -EINVAL;
-
- elfcorehdr_addr = memparse(arg, &arg);
-
- return 0;
-}
-early_param("elfcorehdr", parse_elfcorehdr);
-
/**
* copy_oldmem_page - copy one page from "oldmem"
* @pfn: page frame number to be copied
--- linux-2.6.38.rc.orig/arch/x86/kernel/crash_dump_32.c
+++ linux-2.6.38.rc/arch/x86/kernel/crash_dump_32.c
@@ -14,9 +14,6 @@
static void *kdump_buf_page;
-/* Stores the physical address of elf header of crash image. */
-unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
-
static inline bool is_crashed_pfn_valid(unsigned long pfn)
{
#ifndef CONFIG_X86_PAE
--- linux-2.6.38.rc.orig/arch/x86/kernel/crash_dump_64.c
+++ linux-2.6.38.rc/arch/x86/kernel/crash_dump_64.c
@@ -10,9 +10,6 @@
#include <linux/uaccess.h>
#include <linux/io.h>
-/* Stores the physical address of elf header of crash image. */
-unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
-
/**
* copy_oldmem_page - copy one page from "oldmem"
* @pfn: page frame number to be copied
--- linux-2.6.38.rc.orig/arch/x86/kernel/e820.c
+++ linux-2.6.38.rc/arch/x86/kernel/e820.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
+#include <linux/crash_dump.h>
#include <linux/bootmem.h>
#include <linux/pfn.h>
#include <linux/suspend.h>
--- linux-2.6.38.rc.orig/arch/x86/kernel/setup.c
+++ linux-2.6.38.rc/arch/x86/kernel/setup.c
@@ -601,28 +601,6 @@ void __init reserve_standard_io_resource
}
-/*
- * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
- * is_kdump_kernel() to determine if we are booting after a panic. Hence
- * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
- */
-
-#ifdef CONFIG_CRASH_DUMP
-/* elfcorehdr= specifies the location of elf core header
- * stored by the crashed kernel. This option will be passed
- * by kexec loader to the capture kernel.
- */
-static int __init setup_elfcorehdr(char *arg)
-{
- char *end;
- if (!arg)
- return -EINVAL;
- elfcorehdr_addr = memparse(arg, &end);
- return end > arg ? 0 : -EINVAL;
-}
-early_param("elfcorehdr", setup_elfcorehdr);
-#endif
-
static __init void reserve_ibft_region(void)
{
unsigned long addr, size = 0;
--- linux-2.6.38.rc.orig/include/linux/bootmem.h
+++ linux-2.6.38.rc/include/linux/bootmem.h
@@ -19,10 +19,6 @@ extern unsigned long min_low_pfn;
*/
extern unsigned long max_pfn;
-#ifdef CONFIG_CRASH_DUMP
-extern unsigned long saved_max_pfn;
-#endif
-
#ifndef CONFIG_NO_BOOTMEM
/*
* node_bootmem_map is a map pointer - the bits represent all physical
--- linux-2.6.38.rc.orig/kernel/Makefile
+++ linux-2.6.38.rc/kernel/Makefile
@@ -107,6 +107,7 @@ obj-$(CONFIG_PERF_EVENTS) += perf_event.
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_USER_RETURN_NOTIFIER) += user-return-notifier.o
obj-$(CONFIG_PADATA) += padata.o
+obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y)
# According to Alan Modra <alan@...uxcare.com.au>, the -fno-omit-frame-pointer is
--- /dev/null
+++ linux-2.6.38.rc/kernel/crash_dump.c
@@ -0,0 +1,33 @@
+#include <linux/crash_dump.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+/*
+ * If we have booted due to a crash, max_pfn will be a very low value. We need
+ * to know the amount of memory that the previous kernel used.
+ */
+unsigned long saved_max_pfn;
+
+/*
+ * stores the physical address of elf header of crash image
+ *
+ * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
+ * is_kdump_kernel() to determine if we are booting after a panic. Hence put
+ * it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
+ */
+unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
+EXPORT_SYMBOL_GPL(elfcorehdr_addr);
+
+/*
+ * elfcorehdr= specifies the location of elf core header stored by the crashed
+ * kernel. This option will be passed by kexec loader to the capture kernel.
+ */
+static int __init setup_elfcorehdr(char *arg)
+{
+ char *end;
+ if (!arg)
+ return -EINVAL;
+ elfcorehdr_addr = memparse(arg, &end);
+ return end > arg ? 0 : -EINVAL;
+}
+early_param("elfcorehdr", setup_elfcorehdr);
--- linux-2.6.38.rc.orig/mm/bootmem.c
+++ linux-2.6.38.rc/mm/bootmem.c
@@ -27,14 +27,6 @@ unsigned long max_low_pfn;
unsigned long min_low_pfn;
unsigned long max_pfn;
-#ifdef CONFIG_CRASH_DUMP
-/*
- * If we have booted due to a crash, max_pfn will be a very low value. We need
- * to know the amount of memory that the previous kernel used.
- */
-unsigned long saved_max_pfn;
-#endif
-
#ifndef CONFIG_NO_BOOTMEM
bootmem_data_t bootmem_node_data[MAX_NUMNODES] __initdata;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists