| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1296026490-14665-1-git-send-email-hs@denx.de>
Date: Wed, 26 Jan 2011 08:21:30 +0100
From: Heiko Schocher <hs@...x.de>
To: linuxppc-dev@...ts.ozlabs.org
Cc: Heiko Schocher <hs@...x.de>, linux-fbdev@...r.kernel.org,
devicetree-discuss@...abs.org, Ben Dooks <ben@...tec.co.uk>,
Vincent Sanders <vince@...tec.co.uk>,
Samuel Ortiz <sameo@...ux.intel.com>,
linux-kernel@...r.kernel.org, Randy Dunlap <rdunlap@...otime.net>,
Paul Mundt <lethal@...ux-sh.org>
Subject: [PATCH 3/4 v5] video, sm501: add OF binding to support SM501
- add binding to OF, compatible name "smi,sm501"
Signed-off-by: Heiko Schocher <hs@...x.de>
cc: linux-fbdev@...r.kernel.org
cc: devicetree-discuss@...abs.org
cc: Ben Dooks <ben@...tec.co.uk>
cc: Vincent Sanders <vince@...tec.co.uk>
cc: Samuel Ortiz <sameo@...ux.intel.com>
cc: linux-kernel@...r.kernel.org
cc: Randy Dunlap <rdunlap@...otime.net>
cc: Paul Mundt <lethal@...ux-sh.org>
---
- changes since v1:
add Ben Dooks, Vincent Sanders and Samuel Ortiz to cc, as suggested from
Paul Mundt.
- changes since v2:
add comments from Randy Dunlap:
- move parameter documentation to Documentation/fb/sm501.txt
- changes since v3:
- rebased against v2.6.38-rc2
- split in 3 patches
- of support patch
- get rid of "#if defined(CONFIG_PPC_MPC52xx)" usage
hide this in DTS, as Paul suggested.
- i/o routine patch
- edid support patch
- changes since v4
replace remaining CONFIG_PPC_MPC52xx with CONFIG_OF, as
it is no longer MPC52xx only.
- changes since v5
free edid_data after its usage, as it is no longer needed,
suggested from Paul Mundt. Also fall back to default if
kmemdup(edid_data) fails.
./scripts/checkpatch.pl 0003-video-sm501-add-OF-binding-to-support-SM501.patch
total: 0 errors, 0 warnings, 132 lines checked
0003-video-sm501-add-OF-binding-to-support-SM501.patch has no obvious style problems and is ready for submission.
Documentation/powerpc/dts-bindings/sm501.txt | 34 +++++++++++++++++++++
drivers/mfd/sm501.c | 9 +++++-
drivers/video/sm501fb.c | 42 ++++++++++++++++++++++++--
3 files changed, 81 insertions(+), 4 deletions(-)
create mode 100644 Documentation/powerpc/dts-bindings/sm501.txt
diff --git a/Documentation/powerpc/dts-bindings/sm501.txt b/Documentation/powerpc/dts-bindings/sm501.txt
new file mode 100644
index 0000000..7d319fb
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/sm501.txt
@@ -0,0 +1,34 @@
+* SM SM501
+
+The SM SM501 is a LCD controller, with proper hardware, it can also
+drive DVI monitors.
+
+Required properties:
+- compatible : should be "smi,sm501".
+- reg : contain two entries:
+ - First entry: System Configuration register
+ - Second entry: IO space (Display Controller register)
+- interrupts : SMI interrupt to the cpu should be described here.
+- interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+
+Optional properties:
+- mode : select a video mode:
+ <xres>x<yres>[-<bpp>][@<refresh>]
+- edid : verbatim EDID data block describing attached display.
+ Data from the detailed timing descriptor will be used to
+ program the display controller.
+- little-endian: availiable on big endian systems, to
+ set different foreign endian.
+- big-endian: availiable on little endian systems, to
+ set different foreign endian.
+
+Example for MPC5200:
+ display@1,0 {
+ compatible = "smi,sm501";
+ reg = <1 0x00000000 0x00800000
+ 1 0x03e00000 0x00200000>;
+ interrupts = <1 1 3>;
+ mode = "640x480-32@60";
+ edid = [edid-data];
+ };
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 558d5f3..df3702c 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -1377,7 +1377,7 @@ static int __devinit sm501_init_dev(struct sm501_devdata *sm)
sm501_register_gpio(sm);
}
- if (pdata->gpio_i2c != NULL && pdata->gpio_i2c_nr > 0) {
+ if (pdata && pdata->gpio_i2c != NULL && pdata->gpio_i2c_nr > 0) {
if (!sm501_gpio_isregistered(sm))
dev_err(sm->dev, "no gpio available for i2c gpio.\n");
else
@@ -1422,6 +1422,7 @@ static int __devinit sm501_plat_probe(struct platform_device *dev)
sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+
if (sm->io_res == NULL || sm->mem_res == NULL) {
dev_err(&dev->dev, "failed to get IO resource\n");
ret = -ENOENT;
@@ -1735,10 +1736,16 @@ static struct pci_driver sm501_pci_driver = {
MODULE_ALIAS("platform:sm501");
+static struct of_device_id __devinitdata of_sm501_match_tbl[] = {
+ { .compatible = "smi,sm501", },
+ { /* end */ }
+};
+
static struct platform_driver sm501_plat_driver = {
.driver = {
.name = "sm501",
.owner = THIS_MODULE,
+ .of_match_table = of_sm501_match_tbl,
},
.probe = sm501_plat_probe,
.remove = sm501_plat_remove,
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index d60b2a2..92b001d 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -1729,6 +1729,15 @@ static int sm501fb_init_fb(struct fb_info *fb,
FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT |
FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
+#if defined(CONFIG_OF)
+#ifdef __BIG_ENDIAN
+ if (of_get_property(info->dev->parent->of_node, "little-endian", NULL))
+ fb->flags |= FBINFO_FOREIGN_ENDIAN;
+#else
+ if (of_get_property(info->dev->parent->of_node, "big-endian", NULL))
+ fb->flags |= FBINFO_FOREIGN_ENDIAN;
+#endif
+#endif
/* fixed data */
fb->fix.type = FB_TYPE_PACKED_PIXELS;
@@ -1765,14 +1774,17 @@ static int sm501fb_init_fb(struct fb_info *fb,
fb->var.xres_virtual = fb->var.xres;
fb->var.yres_virtual = fb->var.yres;
} else {
- if (info->edid_data)
+ if (info->edid_data) {
ret = fb_find_mode(&fb->var, fb, fb_mode,
fb->monspecs.modedb,
fb->monspecs.modedb_len,
&sm501_default_mode, default_bpp);
- else
+ /* edid_data is no longer needed, free it */
+ kfree(info->edid_data);
+ } else {
ret = fb_find_mode(&fb->var, fb,
NULL, NULL, 0, NULL, 8);
+ }
switch (ret) {
case 1:
@@ -1933,8 +1945,32 @@ static int __devinit sm501fb_probe(struct platform_device *pdev)
}
if (info->pdata == NULL) {
- dev_info(dev, "using default configuration data\n");
+ int found = 0;
+#if defined(CONFIG_OF)
+ struct device_node *np = pdev->dev.parent->of_node;
+ const u8 *prop;
+ const char *cp;
+ int len;
+
info->pdata = &sm501fb_def_pdata;
+ if (np) {
+ /* Get EDID */
+ cp = of_get_property(np, "mode", &len);
+ if (cp)
+ strcpy(fb_mode, cp);
+ prop = of_get_property(np, "edid", &len);
+ if (prop && len == EDID_LENGTH) {
+ info->edid_data = kmemdup(prop, EDID_LENGTH,
+ GFP_KERNEL);
+ if (info->edid_data)
+ found = 1;
+ }
+ }
+#endif
+ if (!found) {
+ dev_info(dev, "using default configuration data\n");
+ info->pdata = &sm501fb_def_pdata;
+ }
}
/* probe for the presence of each panel */
--
1.7.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists