| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1296205202-3799-1-git-send-email-tomoya-linux@dsn.okisemi.com>
Date: Fri, 28 Jan 2011 18:00:01 +0900
From: Tomoya MORINAGA <tomoya-linux@....okisemi.com>
To: Greg Kroah-Hartman <gregkh@...e.de>,
Alan Cox <alan@...ux.intel.com>,
Ben Dooks <ben-linux@...ff.org>,
Mike Frysinger <vapier@...too.org>,
Feng Tang <feng.tang@...el.com>, linux-kernel@...r.kernel.org
Cc: qi.wang@...el.com, yong.y.wang@...el.com, joel.clark@...el.com,
kok.howg.ewe@...el.com, toshiharu-linux@....okisemi.com,
Tomoya MORINAGA <tomoya-linux@....okisemi.com>
Subject: [PATCH 1/2] pch_uart: support new device ML7213
Support ML7213 device of OKI SEMICONDUCTOR.
ML7213 is companion chip of Intel Atom E6xx series for IVI(In-Vehicle Infotainment).
ML7213 is completely compatible for Intel EG20T PCH.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@....okisemi.com>
---
drivers/serial/Kconfig | 5 +++++
drivers/serial/pch_uart.c | 27 +++++++++++++++++++--------
2 files changed, 24 insertions(+), 8 deletions(-)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index c1df767..3d836f0 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1595,4 +1595,9 @@ config SERIAL_PCH_UART
This driver is for PCH(Platform controller Hub) UART of Intel EG20T
which is an IOH(Input/Output Hub) for x86 embedded processor.
Enabling PCH_DMA, this PCH UART works as DMA mode.
+
+ This driver also can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/
+ Output Hub) which is for IVI(In-Vehicle Infotainment) use.
+ ML7213 is companion chip for Intel Atom E6xx series.
+ ML7213 is completely compatible for Intel EG20T PCH.
endmenu
diff --git a/drivers/serial/pch_uart.c b/drivers/serial/pch_uart.c
index 70a6145..3b2fb93 100644
--- a/drivers/serial/pch_uart.c
+++ b/drivers/serial/pch_uart.c
@@ -40,10 +40,11 @@ enum {
#define PCH_UART_DRIVER_DEVICE "ttyPCH"
-#define PCH_UART_NR_GE_256FIFO 1
-#define PCH_UART_NR_GE_64FIFO 3
-#define PCH_UART_NR_GE (PCH_UART_NR_GE_256FIFO+PCH_UART_NR_GE_64FIFO)
-#define PCH_UART_NR PCH_UART_NR_GE
+/* Set the max number of UART port
+ * Intel EG20T PCH: 4 port
+ * OKI SEMICONDUCTOR ML7213 IOH: 3 port
+*/
+#define PCH_UART_NR 4
#define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1))
#define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1))
@@ -192,6 +193,8 @@ enum {
#define PCH_UART_HAL_LOOP (PCH_UART_MCR_LOOP)
#define PCH_UART_HAL_AFE (PCH_UART_MCR_AFE)
+#define PCI_VENDOR_ID_ROHM 0x10DB
+
struct pch_uart_buffer {
unsigned char *buf;
int size;
@@ -1249,7 +1252,7 @@ static struct uart_driver pch_uart_driver = {
};
static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
- int port_type)
+ const struct pci_device_id *id)
{
struct eg20t_port *priv;
int ret;
@@ -1258,6 +1261,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
unsigned char *rxbuf;
int fifosize, base_baud;
static int num;
+ int port_type = id->driver_data;
priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL);
if (priv == NULL)
@@ -1269,11 +1273,11 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
switch (port_type) {
case PORT_UNKNOWN:
- fifosize = 256; /* UART0 */
+ fifosize = 256; /* EG20T/ML7213: UART0 */
base_baud = 1843200; /* 1.8432MHz */
break;
case PORT_8250:
- fifosize = 64; /* UART1~3 */
+ fifosize = 64; /* EG20T:UART1~3 ML7213: UART1~2*/
base_baud = 1843200; /* 1.8432MHz */
break;
default:
@@ -1307,6 +1311,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
pci_set_drvdata(pdev, priv);
pch_uart_hal_request(pdev, fifosize, base_baud);
+
ret = uart_add_one_port(&pch_uart_driver, &priv->port);
if (ret < 0)
goto init_port_hal_free;
@@ -1384,6 +1389,12 @@ static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = {
.driver_data = PCH_UART_2LINE},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814),
.driver_data = PCH_UART_2LINE},
+ {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027),
+ .driver_data = PCH_UART_8LINE},
+ {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028),
+ .driver_data = PCH_UART_2LINE},
+ {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029),
+ .driver_data = PCH_UART_2LINE},
{0,},
};
@@ -1397,7 +1408,7 @@ static int __devinit pch_uart_pci_probe(struct pci_dev *pdev,
if (ret < 0)
goto probe_error;
- priv = pch_uart_init_port(pdev, id->driver_data);
+ priv = pch_uart_init_port(pdev, id);
if (!priv) {
ret = -EBUSY;
goto probe_disable_device;
--
1.6.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists