[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20110131154626.GD3819@enneenne.com>
Date: Mon, 31 Jan 2011 16:46:26 +0100
From: Rodolfo Giometti <giometti@...eenne.com>
To: Anton Vorontsov <cbouatmailru@...il.com>
Cc: Grazvydas Ignotas <notasas@...il.com>,
linux-kernel@...r.kernel.org,
Pali Rohár <pali.rohar@...il.com>
Subject: Re: Fwd: [PATCH] bq27x00_battery: Some fixes
On Mon, Jan 31, 2011 at 04:54:17PM +0300, Anton Vorontsov wrote:
> The same is for this patch.
>
> Comments, Reviewed-by or Acked-by?
>
> p.s. FWIW, I already asked Pali to factor out bq27x00_battery_time()
> fix to a separate patch.
>
> ----- Forwarded message from Pali Rohár <pali.rohar@...il.com> -----
>
> Date: Wed, 26 Jan 2011 21:42:39 +0100
> From: Pali Rohár <pali.rohar@...il.com>
> To: Anton Vorontsov <cbouatmailru@...il.com>
> Cc: David Woodhouse <dwmw2@...radead.org>
> Subject: Re: [PATCH] bq27x00_battery
>
> This patch fix reporting correct (devided by resistor sense) values on
> bq27000/bq27200 batteries.
>
> Signed-off-by: Pali Rohár <pali.rohar@...il.com>
> Tested-by: Pali Rohár <pali.rohar@...il.com>
>
> --- a/drivers/power/bq27x00_battery.c 2011-01-26 21:30:40.000000000 +0100
> +++ b/drivers/power/bq27x00_battery.c 2011-01-26 21:32:34.000000000 +0100
> @@ -37,10 +37,11 @@
> #define BQ27x00_REG_TTF 0x18
> #define BQ27x00_REG_TTECP 0x26
>
> +#define BQ27000_RS 20 /* Resistor sense */
> #define BQ27000_REG_RSOC 0x0B /* Relative State-of-Charge */
> #define BQ27000_FLAG_CHGS BIT(7)
>
> -#define BQ27500_REG_SOC 0x2c
> +#define BQ27500_REG_SOC 0x2C
> #define BQ27500_FLAG_DSC BIT(0)
> #define BQ27500_FLAG_FC BIT(9)
>
> @@ -112,7 +113,7 @@ static int bq27x00_battery_temperature(s
> }
>
> /*
> - * Return the battery Voltage in milivolts
> + * Return the battery Voltage in µV
> * Or < 0 if something fails.
> */
> static int bq27x00_battery_voltage(struct bq27x00_device_info *di)
> @@ -130,7 +131,7 @@ static int bq27x00_battery_voltage(struc
> }
Ok, but I think we should change the function name adding _mV...
>
> /*
> - * Return the battery average current
> + * Return the battery average current in µA
> * Note that current can be negative signed as well
> * Or 0 if something fails.
> */
> @@ -149,6 +150,7 @@ static int bq27x00_battery_current(struc
> if (di->chip == BQ27500) {
> /* bq27500 returns signed value */
> curr = (int)(s16)curr;
> + curr *= 1000;
> } else {
> ret = bq27x00_read(BQ27x00_REG_FLAGS, &flags, 0, di);
> if (ret < 0) {
> @@ -159,9 +161,10 @@ static int bq27x00_battery_current(struc
> dev_dbg(di->dev, "negative current!\n");
> curr = -curr;
> }
> + curr = curr * 3570 / BQ27000_RS;
> }
>
> - return curr * 1000;
> + return curr;
> }
And here _mA.
> /*
> @@ -233,7 +236,7 @@ static int bq27x00_battery_time(struct b
> }
>
> if (tval == 65535)
> - return -ENODATA;
> + tval = 0;
>
> val->intval = tval * 60;
> return 0;
>
> ----- End forwarded message -----
Ciao,
Rodolfo
--
GNU/Linux Solutions e-mail: giometti@...eenne.com
Linux Device Driver giometti@...ux.it
Embedded Systems phone: +39 349 2432127
UNIX programming skype: rodolfo.giometti
Freelance ICT Italia - Consulente ICT Italia - www.consulenti-ict.it
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists