Message-Id: <1296568063-12010-3-git-send-email-aghayal@codeaurora.org>
Date:	Tue,  1 Feb 2011 19:17:38 +0530
From:	Anirudh Ghayal <aghayal@...eaurora.org>
To:	linux-kernel@...r.kernel.org
Cc:	linux-input@...r.kernel.org, rtc-linux@...glegroups.com,
	linux-arm-msm@...r.kernel.org, Trilok Soni <tsoni@...eaurora.org>,
	Dmitry Torokhov <dmitry.torokhov@...il.com>
Subject: [RFC v2 PATCH 2/7] input: pm8058_keypad: Qualcomm PMIC8058 keypad controller driver

From: Trilok Soni <tsoni@...eaurora.org>

Add Qualcomm PMIC8058 based keypad controller driver
supporting upto 18x8 matrix configuration.

Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>
Signed-off-by: Trilok Soni <tsoni@...eaurora.org>
---
Changes from v1:
Addressed review comments from Dmitry.
Race condition handling in suspend/resume
Statically allocate keycode array.

 drivers/input/keyboard/Kconfig           |   11 +
 drivers/input/keyboard/Makefile          |    1 +
 drivers/input/keyboard/pmic8058-keypad.c |  754 ++++++++++++++++++++++++++++++
 include/linux/input/pmic8058-keypad.h    |   53 +++
 4 files changed, 819 insertions(+), 0 deletions(-)
 create mode 100644 drivers/input/keyboard/pmic8058-keypad.c
 create mode 100644 include/linux/input/pmic8058-keypad.h

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 4175073..e85fe36 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -370,6 +370,17 @@ config KEYBOARD_PXA930_ROTARY
 	  To compile this driver as a module, choose M here: the
 	  module will be called pxa930_rotary.
 
+config KEYBOARD_PMIC8058
+	tristate "Qualcomm PMIC8058 keypad support"
+	depends on PMIC8058
+	help
+	  Say Y here if you want to enable the driver for the PMIC8058
+	  keypad provided as a reference design from Qualcomm. This is intended
+	  to support upto 18x8 matrix based keypad design.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called pmic8058-keypad.
+
 config KEYBOARD_SAMSUNG
 	tristate "Samsung keypad support"
 	depends on SAMSUNG_DEV_KEYPAD
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 4e5571b..23e82cf 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_KEYBOARD_OMAP4)		+= omap4-keypad.o
 obj-$(CONFIG_KEYBOARD_OPENCORES)	+= opencores-kbd.o
 obj-$(CONFIG_KEYBOARD_PXA27x)		+= pxa27x_keypad.o
 obj-$(CONFIG_KEYBOARD_PXA930_ROTARY)	+= pxa930_rotary.o
+obj-$(CONFIG_KEYBOARD_PMIC8058)		+= pmic8058-keypad.o
 obj-$(CONFIG_KEYBOARD_QT2160)		+= qt2160.o
 obj-$(CONFIG_KEYBOARD_SAMSUNG)		+= samsung-keypad.o
 obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
diff --git a/drivers/input/keyboard/pmic8058-keypad.c b/drivers/input/keyboard/pmic8058-keypad.c
new file mode 100644
index 0000000..9f641a1
--- /dev/null
+++ b/drivers/input/keyboard/pmic8058-keypad.c
@@ -0,0 +1,754 @@
+/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/bitops.h>
+#include <linux/mfd/pmic8058.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+
+#include <linux/input/pmic8058-keypad.h>
+
+#define PM8058_MAX_ROWS		18
+#define PM8058_MAX_COLS		8
+#define PM8058_ROW_SHIFT	3
+#define PM8058_MATRIX_MAX_SIZE	(PM8058_MAX_ROWS * PM8058_MAX_COLS)
+
+#define PM8058_MIN_ROWS		5
+#define PM8058_MIN_COLS		5
+
+#define MAX_SCAN_DELAY		128
+#define MIN_SCAN_DELAY		1
+
+/* in nanoseconds */
+#define MAX_ROW_HOLD_DELAY	122000
+#define MIN_ROW_HOLD_DELAY	30500
+
+#define MAX_DEBOUNCE_TIME	20
+#define MIN_DEBOUNCE_TIME	5
+
+#define KEYP_CTRL			0x148
+
+#define KEYP_CTRL_EVNTS			BIT(0)
+#define KEYP_CTRL_EVNTS_MASK		0x3
+
+#define KEYP_CTRL_SCAN_COLS_SHIFT	5
+#define KEYP_CTRL_SCAN_COLS_MIN		5
+#define KEYP_CTRL_SCAN_COLS_BITS	0x3
+
+#define KEYP_CTRL_SCAN_ROWS_SHIFT	2
+#define KEYP_CTRL_SCAN_ROWS_MIN		5
+#define KEYP_CTRL_SCAN_ROWS_BITS	0x7
+
+#define KEYP_CTRL_KEYP_EN		BIT(7)
+
+#define KEYP_SCAN			0x149
+
+#define KEYP_SCAN_READ_STATE		BIT(0)
+#define KEYP_SCAN_DBOUNCE_SHIFT		1
+#define KEYP_SCAN_PAUSE_SHIFT		3
+#define KEYP_SCAN_ROW_HOLD_SHIFT	6
+
+#define KEYP_TEST			0x14A
+
+#define KEYP_TEST_CLEAR_RECENT_SCAN	BIT(6)
+#define KEYP_TEST_CLEAR_OLD_SCAN	BIT(5)
+#define KEYP_TEST_READ_RESET		BIT(4)
+#define KEYP_TEST_DTEST_EN		BIT(3)
+#define KEYP_TEST_ABORT_READ		BIT(0)
+
+#define KEYP_TEST_DBG_SELECT_SHIFT	1
+
+/* bits of these registers represent
+ * '0' for key press
+ * '1' for key release
+ */
+#define KEYP_RECENT_DATA		0x14B
+#define KEYP_OLD_DATA			0x14C
+
+#define KEYP_CLOCK_FREQ			32768
+
+/**
+ * struct pmic8058_kp - internal keypad data structure
+ * @pdata - keypad platform data pointer
+ * @input - input device pointer for keypad
+ * @key_sense_irq - key press/release irq number
+ * @key_stuck_irq - key stuck notification irq number
+ * @keycodes - array to hold the key codes
+ * @dev - parent device pointer
+ * @keystate - present key press/release state
+ * @stuckstate - present state when key stuck irq
+ * @pm_chip - parent MFD core device
+ * @ctrl_reg - control register value
+ */
+struct pmic8058_kp {
+	const struct pmic8058_keypad_data *pdata;
+	struct input_dev *input;
+	int key_sense_irq;
+	int key_stuck_irq;
+
+	unsigned short keycodes[PM8058_MATRIX_MAX_SIZE];
+
+	struct device *dev;
+	u16 keystate[PM8058_MAX_ROWS];
+	u16 stuckstate[PM8058_MAX_ROWS];
+
+	struct pm8058_chip	*pm_chip;
+
+	u8			ctrl_reg;
+};
+
+static int pmic8058_kp_write_u8(struct pmic8058_kp *kp,
+				 u8 data, u16 reg)
+{
+	int rc;
+
+	rc = pm8058_write(kp->pm_chip, reg, &data, 1);
+	if (rc < 0)
+		dev_warn(kp->dev, "Error writing pmic8058: %X - ret %X\n",
+				reg, rc);
+	return rc;
+}
+
+static int pmic8058_kp_read(struct pmic8058_kp *kp,
+				 u8 *data, u16 reg, unsigned num_bytes)
+{
+	int rc;
+
+	rc = pm8058_read(kp->pm_chip, reg, data, num_bytes);
+	if (rc < 0)
+		dev_warn(kp->dev, "Error reading pmic8058: %X - ret %X\n",
+				reg, rc);
+
+	return rc;
+}
+
+static int pmic8058_kp_read_u8(struct pmic8058_kp *kp,
+				 u8 *data, u16 reg)
+{
+	int rc;
+
+	rc = pmic8058_kp_read(kp, data, reg, 1);
+	if (rc < 0)
+		dev_warn(kp->dev, "Error reading pmic8058: %X - ret %X\n",
+				reg, rc);
+	return rc;
+}
+
+static u8 pmic8058_col_state(struct pmic8058_kp *kp, u8 col)
+{
+	/* all keys pressed on that particular row? */
+	if (col == 0x00)
+		return 1 << kp->pdata->num_cols;
+	else
+		return col & ((1 << kp->pdata->num_cols) - 1);
+}
+
+/*
+ * Synchronous read protocol for RevB0 onwards:
+ *
+ * 1. Write '1' to ReadState bit in KEYP_SCAN register
+ * 2. Wait 2*32KHz clocks, so that HW can successfully enter read mode
+ *    synchronously
+ * 3. Read rows in old array first if events are more than one
+ * 4. Read rows in recent array
+ * 5. Wait 4*32KHz clocks
+ * 6. Write '0' to ReadState bit of KEYP_SCAN register so that hw can
+ *    synchronously exit read mode.
+ */
+static int pmic8058_chk_sync_read(struct pmic8058_kp *kp)
+{
+	int rc;
+	u8 scan_val;
+
+	rc = pmic8058_kp_read_u8(kp, &scan_val, KEYP_SCAN);
+	if (rc < 0)
+		return rc;
+
+	scan_val |= 0x1;
+
+	rc = pmic8058_kp_write_u8(kp, scan_val, KEYP_SCAN);
+	if (rc < 0)
+		return rc;
+
+	/* 2 * 32KHz clocks */
+	udelay((2 * DIV_ROUND_UP(USEC_PER_SEC, KEYP_CLOCK_FREQ)) + 1);
+
+	return rc;
+}
+
+static int pmic8058_kp_read_data(struct pmic8058_kp *kp, u16 *state,
+					u16 data_reg, int read_rows)
+{
+	int rc, row;
+	u8 new_data[PM8058_MAX_ROWS];
+
+	rc = pmic8058_kp_read(kp, new_data, data_reg, read_rows);
+
+	if (!rc) {
+		for (row = 0; row < kp->pdata->num_rows; row++) {
+			dev_dbg(kp->dev, "new_data[%d] = %d\n", row,
+						new_data[row]);
+			state[row] = pmic8058_col_state(kp, new_data[row]);
+		}
+	}
+
+	return rc;
+}
+
+static int pmic8058_kp_read_matrix(struct pmic8058_kp *kp, u16 *new_state,
+					 u16 *old_state)
+{
+	int rc, read_rows;
+	u8 scan_val;
+
+	read_rows = kp->pdata->num_rows;
+
+	pmic8058_chk_sync_read(kp);
+
+	if (old_state) {
+		rc = pmic8058_kp_read_data(kp, old_state, KEYP_OLD_DATA,
+						read_rows);
+		if (rc < 0)
+			return rc;
+	}
+
+	rc = pmic8058_kp_read_data(kp, new_state, KEYP_RECENT_DATA,
+					 read_rows);
+	if (rc < 0)
+		return rc;
+
+	/* 4 * 32KHz clocks */
+	udelay((4 * DIV_ROUND_UP(USEC_PER_SEC, KEYP_CLOCK_FREQ)) + 1);
+
+	rc = pmic8058_kp_read_u8(kp, &scan_val, KEYP_SCAN);
+	if (rc < 0)
+		return rc;
+	scan_val &= 0xFE;
+	rc = pmic8058_kp_write_u8(kp, scan_val, KEYP_SCAN);
+	if (rc < 0)
+		return rc;
+
+	return rc;
+}
+
+static void __pmic8058_kp_scan_matrix(struct pmic8058_kp *kp, u16 *new_state,
+					 u16 *old_state)
+{
+	int row, col, code;
+
+	for (row = 0; row < kp->pdata->num_rows; row++) {
+		int bits_changed = new_state[row] ^ old_state[row];
+
+		if (!bits_changed)
+			continue;
+
+		for (col = 0; col < kp->pdata->num_cols; col++) {
+			if (!(bits_changed & (1 << col)))
+				continue;
+
+			dev_dbg(kp->dev, "key [%d:%d] %s\n", row, col,
+					!(new_state[row] & (1 << col)) ?
+					"pressed" : "released");
+
+			code = MATRIX_SCAN_CODE(row, col, PM8058_ROW_SHIFT);
+			input_event(kp->input, EV_MSC, MSC_SCAN, code);
+			input_report_key(kp->input,
+					kp->keycodes[code],
+					!(new_state[row] & (1 << col)));
+
+			input_sync(kp->input);
+		}
+	}
+}
+
+static bool pmic8058_detect_ghost_keys(struct pmic8058_kp *kp, u16 *new_state)
+{
+	int row, found_first = -1;
+	u16 check, row_state;
+
+	check = 0;
+	for (row = 0; row < kp->pdata->num_rows; row++) {
+		row_state = (~new_state[row]) &
+				 ((1 << kp->pdata->num_cols) - 1);
+
+		if (hweight16(row_state) > 1) {
+			if (found_first == -1)
+				found_first = row;
+			if (check & row_state) {
+				dev_dbg(kp->dev, "detected ghost key on row[%d]"
+					 " and row[%d]\n", found_first, row);
+				return true;
+			}
+		}
+		check |= row_state;
+	}
+	return false;
+}
+
+static int pmic8058_kp_scan_matrix(struct pmic8058_kp *kp, unsigned int events)
+{
+	u16 new_state[PM8058_MAX_ROWS];
+	u16 old_state[PM8058_MAX_ROWS];
+	int rc;
+
+	switch (events) {
+	case 0x1:
+		rc = pmic8058_kp_read_matrix(kp, new_state, NULL);
+		if (rc < 0)
+			return rc;
+
+		/* detecting ghost key is not an error */
+		if (pmic8058_detect_ghost_keys(kp, new_state))
+			return 0;
+		__pmic8058_kp_scan_matrix(kp, new_state, kp->keystate);
+		memcpy(kp->keystate, new_state, sizeof(new_state));
+	break;
+	case 0x3: /* two events - eventcounter is gray-coded */
+		rc = pmic8058_kp_read_matrix(kp, new_state, old_state);
+		if (rc < 0)
+			return rc;
+
+		__pmic8058_kp_scan_matrix(kp, old_state, kp->keystate);
+		__pmic8058_kp_scan_matrix(kp, new_state, old_state);
+		memcpy(kp->keystate, new_state, sizeof(new_state));
+	break;
+	case 0x2:
+		dev_dbg(kp->dev, "Some key events were lost\n");
+		rc = pmic8058_kp_read_matrix(kp, new_state, old_state);
+		if (rc < 0)
+			return rc;
+		__pmic8058_kp_scan_matrix(kp, old_state, kp->keystate);
+		__pmic8058_kp_scan_matrix(kp, new_state, old_state);
+		memcpy(kp->keystate, new_state, sizeof(new_state));
+	break;
+	default:
+		rc = -EINVAL;
+	}
+	return rc;
+}
+
+/*
+ * NOTE: We are reading recent and old data registers blindly
+ * whenever key-stuck interrupt happens, because events counter doesn't
+ * get updated when this interrupt happens due to key stuck doesn't get
+ * considered as key state change.
+ *
+ * We are not using old data register contents after they are being read
+ * because it might report the key which was pressed before the key being stuck
+ * as stuck key because it's pressed status is stored in the old data
+ * register.
+ */
+static irqreturn_t pmic8058_kp_stuck_irq(int irq, void *data)
+{
+	u16 new_state[PM8058_MAX_ROWS];
+	u16 old_state[PM8058_MAX_ROWS];
+	int rc;
+	struct pmic8058_kp *kp = data;
+
+	rc = pmic8058_kp_read_matrix(kp, new_state, old_state);
+	if (rc < 0) {
+		dev_err(kp->dev, "failed to read keypad matrix\n");
+		return IRQ_HANDLED;
+	}
+
+	__pmic8058_kp_scan_matrix(kp, new_state, kp->stuckstate);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pmic8058_kp_irq(int irq, void *data)
+{
+	struct pmic8058_kp *kp = data;
+	u8 ctrl_val, events;
+	int rc;
+
+	rc = pmic8058_kp_read(kp, &ctrl_val, KEYP_CTRL, 1);
+	if (rc < 0) {
+		dev_err(kp->dev, "failed to read keyp_ctrl register\n");
+		return IRQ_HANDLED;
+	}
+
+	events = ctrl_val & KEYP_CTRL_EVNTS_MASK;
+
+	rc = pmic8058_kp_scan_matrix(kp, events);
+	if (rc < 0)
+		dev_err(kp->dev, "failed to scan matrix\n");
+
+	return IRQ_HANDLED;
+}
+
+static int pmic8058_kpd_init(struct pmic8058_kp *kp)
+{
+	int bits, rc, cycles;
+	u8 scan_val = 0, ctrl_val = 0;
+	static const u8 row_bits[] = {
+		0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 7, 7, 7,
+	};
+
+	/* Find column bits */
+	if (kp->pdata->num_cols < KEYP_CTRL_SCAN_COLS_MIN)
+		bits = 0;
+	else
+		bits = kp->pdata->num_cols - KEYP_CTRL_SCAN_COLS_MIN;
+	ctrl_val = (bits & KEYP_CTRL_SCAN_COLS_BITS) <<
+		KEYP_CTRL_SCAN_COLS_SHIFT;
+
+	/* Find row bits */
+	if (kp->pdata->num_rows < KEYP_CTRL_SCAN_ROWS_MIN)
+		bits = 0;
+	else
+		bits = row_bits[kp->pdata->num_rows - KEYP_CTRL_SCAN_ROWS_MIN];
+
+	ctrl_val |= (bits << KEYP_CTRL_SCAN_ROWS_SHIFT);
+
+	rc = pmic8058_kp_write_u8(kp, ctrl_val, KEYP_CTRL);
+	if (rc < 0)
+		return rc;
+
+	bits = (kp->pdata->debounce_ms / 5) - 1;
+
+	scan_val |= (bits << KEYP_SCAN_DBOUNCE_SHIFT);
+
+	bits = fls(kp->pdata->scan_delay_ms) - 1;
+	scan_val |= (bits << KEYP_SCAN_PAUSE_SHIFT);
+
+	/* Row hold time is a multiple of 32KHz cycles. */
+	cycles = (kp->pdata->row_hold_ns * KEYP_CLOCK_FREQ) / NSEC_PER_SEC;
+
+	scan_val |= (cycles << KEYP_SCAN_ROW_HOLD_SHIFT);
+
+	rc = pmic8058_kp_write_u8(kp, scan_val, KEYP_SCAN);
+
+	return rc;
+}
+
+static int pmic8058_kp_enable(struct pmic8058_kp *kp)
+{
+	int rc;
+
+	kp->ctrl_reg |= KEYP_CTRL_KEYP_EN;
+
+	rc = pmic8058_kp_write_u8(kp, kp->ctrl_reg, KEYP_CTRL);
+	if (rc < 0)
+		return rc;
+
+	return rc;
+}
+
+static int pmic8058_kp_disable(struct pmic8058_kp *kp)
+{
+	int rc;
+
+	kp->ctrl_reg &= ~KEYP_CTRL_KEYP_EN;
+
+	rc = pmic8058_kp_write_u8(kp, kp->ctrl_reg, KEYP_CTRL);
+	if (rc < 0)
+		return rc;
+
+	return rc;
+}
+
+static int pmic8058_kp_open(struct input_dev *dev)
+{
+	struct pmic8058_kp *kp = input_get_drvdata(dev);
+
+	return pmic8058_kp_enable(kp);
+}
+
+static void pmic8058_kp_close(struct input_dev *dev)
+{
+	struct pmic8058_kp *kp = input_get_drvdata(dev);
+
+	pmic8058_kp_disable(kp);
+}
+
+/*
+ * keypad controller should be initialized in the following sequence
+ * only, otherwise it might get into FSM stuck state.
+ *
+ * - Initialize keypad control parameters, like no. of rows, columns,
+ *   timing values etc.,
+ * - configure rows and column gpios pull up/down.
+ * - set irq edge type.
+ * - enable the keypad controller.
+ */
+static int __devinit pmic8058_kp_probe(struct platform_device *pdev)
+{
+	struct pmic8058_keypad_data *pdata = pdev->dev.platform_data;
+	const struct matrix_keymap_data *keymap_data;
+	struct pmic8058_kp *kp;
+	int rc;
+	u8 ctrl_val;
+	struct pm8058_chip	*pm_chip;
+
+	pm_chip = platform_get_drvdata(pdev);
+	if (pm_chip == NULL) {
+		dev_err(&pdev->dev, "no parent data passed in\n");
+		return -EINVAL;
+	}
+
+	/* Check PMIC8058 version. 1.0 version is not supported */
+	if (pm8058_rev(pm_chip) == PM_8058_REV_1p0) {
+		dev_err(&pdev->dev, "PMIC8058 1.0 version is not supported\n");
+		return -ENODEV;
+	}
+
+	if (!pdata || !pdata->num_cols || !pdata->num_rows ||
+		pdata->num_cols > PM8058_MAX_COLS ||
+		pdata->num_rows > PM8058_MAX_ROWS ||
+		pdata->num_cols < PM8058_MIN_COLS ||
+		pdata->num_rows < PM8058_MIN_ROWS) {
+		dev_err(&pdev->dev, "invalid platform data\n");
+		return -EINVAL;
+	}
+
+	if (!pdata->scan_delay_ms || pdata->scan_delay_ms > MAX_SCAN_DELAY
+		|| pdata->scan_delay_ms < MIN_SCAN_DELAY ||
+		!is_power_of_2(pdata->scan_delay_ms)) {
+		dev_err(&pdev->dev, "invalid keypad scan time supplied\n");
+		return -EINVAL;
+	}
+
+	if (!pdata->row_hold_ns || pdata->row_hold_ns > MAX_ROW_HOLD_DELAY ||
+		pdata->row_hold_ns < MIN_ROW_HOLD_DELAY ||
+		((pdata->row_hold_ns % MIN_ROW_HOLD_DELAY) != 0)) {
+		dev_err(&pdev->dev, "invalid keypad row hold time supplied\n");
+		return -EINVAL;
+	}
+
+	if (!pdata->debounce_ms ||
+		((pdata->debounce_ms % 5) != 0) ||
+		pdata->debounce_ms > MAX_DEBOUNCE_TIME ||
+		pdata->debounce_ms < MIN_DEBOUNCE_TIME) {
+		dev_err(&pdev->dev, "invalid debounce time supplied\n");
+		return -EINVAL;
+	}
+
+	keymap_data = pdata->keymap_data;
+	if (!keymap_data) {
+		dev_err(&pdev->dev, "no keymap data supplied\n");
+		return -EINVAL;
+	}
+
+	kp = kzalloc(sizeof(*kp), GFP_KERNEL);
+	if (!kp)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, kp);
+
+	kp->pdata	= pdata;
+	kp->dev		= &pdev->dev;
+	kp->pm_chip	= pm_chip;
+
+	kp->input = input_allocate_device();
+	if (!kp->input) {
+		dev_err(&pdev->dev, "unable to allocate input device\n");
+		rc = -ENOMEM;
+		goto err_alloc_device;
+	}
+
+	kp->key_sense_irq = platform_get_irq(pdev, 0);
+	if (kp->key_sense_irq < 0) {
+		dev_err(&pdev->dev, "unable to get keypad sense irq\n");
+		rc = -ENXIO;
+		goto err_get_irq;
+	}
+
+	kp->key_stuck_irq = platform_get_irq(pdev, 1);
+	if (kp->key_stuck_irq < 0) {
+		dev_err(&pdev->dev, "unable to get keypad stuck irq\n");
+		rc = -ENXIO;
+		goto err_get_irq;
+	}
+
+	kp->input->name = pdata->input_name ? : "PMIC8058 keypad";
+	kp->input->phys = pdata->input_phys_device ? : "pmic8058_keypad/input0";
+
+	kp->input->dev.parent	= &pdev->dev;
+
+	kp->input->id.bustype	= BUS_I2C;
+	kp->input->id.version	= 0x0001;
+	kp->input->id.product	= 0x0001;
+	kp->input->id.vendor	= 0x0001;
+
+	kp->input->evbit[0]	= BIT_MASK(EV_KEY);
+
+	if (pdata->rep)
+		__set_bit(EV_REP, kp->input->evbit);
+
+	kp->input->keycode	= kp->keycodes;
+	kp->input->keycodemax	= PM8058_MATRIX_MAX_SIZE;
+	kp->input->keycodesize	= sizeof(kp->keycodes);
+	kp->input->open		= pmic8058_kp_open;
+	kp->input->close	= pmic8058_kp_close;
+
+	matrix_keypad_build_keymap(keymap_data, PM8058_ROW_SHIFT,
+					kp->input->keycode, kp->input->keybit);
+
+	input_set_capability(kp->input, EV_MSC, MSC_SCAN);
+	input_set_drvdata(kp->input, kp);
+
+	/* initialize keypad state */
+	memset(kp->keystate, 0xff, sizeof(kp->keystate));
+	memset(kp->stuckstate, 0xff, sizeof(kp->stuckstate));
+
+	rc = pmic8058_kpd_init(kp);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "unable to initialize keypad controller\n");
+		goto err_kpd_init;
+	}
+
+	rc = request_any_context_irq(kp->key_sense_irq, pmic8058_kp_irq,
+				 IRQF_TRIGGER_RISING, "pmic-keypad", kp);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "failed to request keypad sense irq\n");
+		goto err_req_sense_irq;
+	}
+
+	rc = request_any_context_irq(kp->key_stuck_irq, pmic8058_kp_stuck_irq,
+				 IRQF_TRIGGER_RISING, "pmic-keypad-stuck", kp);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "failed to request keypad stuck irq\n");
+		goto err_req_stuck_irq;
+	}
+
+	rc = pmic8058_kp_read_u8(kp, &ctrl_val, KEYP_CTRL);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "failed to read KEYP_CTRL register\n");
+		goto err_pmic_reg_read;
+	}
+
+	kp->ctrl_reg = ctrl_val;
+
+	rc = input_register_device(kp->input);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "unable to register keypad input device\n");
+		goto err_reg_input_dev;
+	}
+
+	device_init_wakeup(&pdev->dev, pdata->wakeup);
+
+	return 0;
+
+err_reg_input_dev:
+err_pmic_reg_read:
+	free_irq(kp->key_stuck_irq, NULL);
+err_req_stuck_irq:
+	free_irq(kp->key_sense_irq, NULL);
+err_req_sense_irq:
+err_kpd_init:
+err_get_irq:
+	input_free_device(kp->input);
+err_alloc_device:
+	kfree(kp);
+	return rc;
+}
+
+static int __devexit pmic8058_kp_remove(struct platform_device *pdev)
+{
+	struct pmic8058_kp *kp = platform_get_drvdata(pdev);
+
+	device_init_wakeup(&pdev->dev, 0);
+	free_irq(kp->key_stuck_irq, NULL);
+	free_irq(kp->key_sense_irq, NULL);
+	input_unregister_device(kp->input);
+	kfree(kp);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pmic8058_kp_suspend(struct device *dev)
+{
+	struct pmic8058_kp *kp = dev_get_drvdata(dev);
+	struct input_dev *input_dev = kp->input;
+
+	if (device_may_wakeup(dev)) {
+		enable_irq_wake(kp->key_sense_irq);
+	} else {
+		mutex_lock(&input_dev->mutex);
+
+		if (input_dev->users)
+			pmic8058_kp_disable(kp);
+
+		mutex_unlock(&input_dev->mutex);
+	}
+
+	return 0;
+}
+
+static int pmic8058_kp_resume(struct device *dev)
+{
+	struct pmic8058_kp *kp = dev_get_drvdata(dev);
+	struct input_dev *input_dev = kp->input;
+
+	if (device_may_wakeup(dev)) {
+		disable_irq_wake(kp->key_sense_irq);
+	} else {
+		mutex_lock(&input_dev->mutex);
+
+		if (input_dev->users)
+			pmic8058_kp_enable(kp);
+
+		mutex_unlock(&input_dev->mutex);
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops pm8058_kp_pm_ops = {
+	.suspend	= pmic8058_kp_suspend,
+	.resume		= pmic8058_kp_resume,
+};
+#endif
+
+static struct platform_driver pmic8058_kp_driver = {
+	.probe		= pmic8058_kp_probe,
+	.remove		= __devexit_p(pmic8058_kp_remove),
+	.driver		= {
+		.name = "pm8058-keypad",
+		.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm = &pm8058_kp_pm_ops,
+#endif
+	},
+};
+
+static int __init pmic8058_kp_init(void)
+{
+	return platform_driver_register(&pmic8058_kp_driver);
+}
+module_init(pmic8058_kp_init);
+
+static void __exit pmic8058_kp_exit(void)
+{
+	platform_driver_unregister(&pmic8058_kp_driver);
+}
+module_exit(pmic8058_kp_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("PMIC8058 keypad driver");
+MODULE_VERSION("1.0");
+MODULE_ALIAS("platform:pmic8058_keypad");
+MODULE_AUTHOR("Trilok Soni <tsoni@...eaurora.org>");
diff --git a/include/linux/input/pmic8058-keypad.h b/include/linux/input/pmic8058-keypad.h
new file mode 100644
index 0000000..f5acfb9
--- /dev/null
+++ b/include/linux/input/pmic8058-keypad.h
@@ -0,0 +1,53 @@
+/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef __PMIC8058_KEYPAD_H__
+#define __PMIC8058_KEYPAD_H__
+
+#include <linux/input/matrix_keypad.h>
+
+/**
+ * struct pmic8058_keypad_data - platform data for keypad
+ * @keymap_data - matrix keymap data
+ * @input_name - input device name
+ * @input_phys_device - input device name
+ * @num_cols - number of columns of keypad
+ * @num_rows - number of row of keypad
+ * @debounce_ms - debounce period in milliseconds
+ * @scan_delay_ms - scan delay in milliseconds
+ * @row_hold_ns - row hold period in nanoseconds
+ * @wakeup - configure keypad as wakeup
+ * @rep - enable or disable key repeat bit
+ */
+struct pmic8058_keypad_data {
+	const struct matrix_keymap_data *keymap_data;
+
+	const char *input_name;
+	const char *input_phys_device;
+
+	unsigned int num_cols;
+	unsigned int num_rows;
+
+	unsigned int debounce_ms;
+	unsigned int scan_delay_ms;
+	unsigned int row_hold_ns;
+
+	bool wakeup;
+	bool rep;
+};
+
+#endif /*__PMIC8058_KEYPAD_H__ */
-- 
1.7.3.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists