[<prev] [next>] [day] [month] [year] [list]
Message-ID: <1296768277.3022.498.camel@mulgrave.site>
Date: Thu, 03 Feb 2011 15:24:37 -0600
From: James Bottomley <James.Bottomley@...e.de>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-scsi <linux-scsi@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: [GIT PULL] SCSI fixes for 2.6.38-rc3
This is a set of misc fixes; mostly in mpt2sas, although there's a SCSI
scatterlist compile issue and a fix to the libsas error handler as well.
The patch is available here:
master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git
The short change log is:
David Dillow (1):
fix incorrect value of SCSI_MAX_SG_CHAIN_SEGMENTS due to include file ordering
James Bottomley (1):
libsas: fix runaway error handler problem
Kashyap, Desai (6):
mpt2sas: fix Integrated Raid unsynced on shutdown problem
mpt2sas: Kernel Panic during Large Topology discovery
mpt2sas: Fix the race between broadcast asyn event and scsi command completion
mpt2sas: Correct resizing calculation for max_queue_depth
mpt2sas: fix internal device reset for older firmware prior to MPI Rev K
mpt2sas: Fix device removal handshake for zoned devices
NickCheng (1):
arcmsr: Fix the issue of system hangup after commands timeout on ARC-1200
and the diffstat:
drivers/scsi/arcmsr/arcmsr.h | 11 ++-
drivers/scsi/arcmsr/arcmsr_attr.c | 2 +-
drivers/scsi/arcmsr/arcmsr_hba.c | 114 ++++++++++++----------------------
drivers/scsi/libsas/sas_scsi_host.c | 1 +
drivers/scsi/mpt2sas/mpt2sas_base.c | 19 ++++--
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 64 +++++++++++++++----
include/scsi/scsi.h | 1 +
7 files changed, 117 insertions(+), 95 deletions(-)
The full diff is below.
James
---
diff --git a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h
index 475c31a..77b26f5 100644
--- a/drivers/scsi/arcmsr/arcmsr.h
+++ b/drivers/scsi/arcmsr/arcmsr.h
@@ -2,7 +2,7 @@
*******************************************************************************
** O.S : Linux
** FILE NAME : arcmsr.h
-** BY : Erich Chen
+** BY : Nick Cheng
** Description: SCSI RAID Device Driver for
** ARECA RAID Host adapter
*******************************************************************************
@@ -46,8 +46,12 @@
struct device_attribute;
/*The limit of outstanding scsi command that firmware can handle*/
#define ARCMSR_MAX_OUTSTANDING_CMD 256
-#define ARCMSR_MAX_FREECCB_NUM 320
-#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.15 2010/02/02"
+#ifdef CONFIG_XEN
+ #define ARCMSR_MAX_FREECCB_NUM 160
+#else
+ #define ARCMSR_MAX_FREECCB_NUM 320
+#endif
+#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.15 2010/08/05"
#define ARCMSR_SCSI_INITIATOR_ID 255
#define ARCMSR_MAX_XFER_SECTORS 512
#define ARCMSR_MAX_XFER_SECTORS_B 4096
@@ -60,7 +64,6 @@ struct device_attribute;
#define ARCMSR_MAX_HBB_POSTQUEUE 264
#define ARCMSR_MAX_XFER_LEN 0x26000 /* 152K */
#define ARCMSR_CDB_SG_PAGE_LENGTH 256
-#define SCSI_CMD_ARECA_SPECIFIC 0xE1
#ifndef PCI_DEVICE_ID_ARECA_1880
#define PCI_DEVICE_ID_ARECA_1880 0x1880
#endif
diff --git a/drivers/scsi/arcmsr/arcmsr_attr.c b/drivers/scsi/arcmsr/arcmsr_attr.c
index a4e04c5..acdae33 100644
--- a/drivers/scsi/arcmsr/arcmsr_attr.c
+++ b/drivers/scsi/arcmsr/arcmsr_attr.c
@@ -2,7 +2,7 @@
*******************************************************************************
** O.S : Linux
** FILE NAME : arcmsr_attr.c
-** BY : Erich Chen
+** BY : Nick Cheng
** Description: attributes exported to sysfs and device host
*******************************************************************************
** Copyright (C) 2002 - 2005, Areca Technology Corporation All rights reserved
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index 1cadcd6..984bd52 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -2,7 +2,7 @@
*******************************************************************************
** O.S : Linux
** FILE NAME : arcmsr_hba.c
-** BY : Erich Chen
+** BY : Nick Cheng
** Description: SCSI RAID Device Driver for
** ARECA RAID Host adapter
*******************************************************************************
@@ -76,7 +76,7 @@ MODULE_DESCRIPTION("ARECA (ARC11xx/12xx/16xx/1880) SATA/SAS RAID Host Bus Adapte
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION(ARCMSR_DRIVER_VERSION);
static int sleeptime = 10;
-static int retrycount = 30;
+static int retrycount = 12;
wait_queue_head_t wait_q;
static int arcmsr_iop_message_xfer(struct AdapterControlBlock *acb,
struct scsi_cmnd *cmd);
@@ -187,7 +187,6 @@ int arcmsr_sleep_for_bus_reset(struct scsi_cmnd *cmd)
if (isleep > 0) {
msleep(isleep*1000);
}
- printk(KERN_NOTICE "wake-up\n");
return 0;
}
@@ -921,7 +920,6 @@ static void arcmsr_report_ccb_state(struct AdapterControlBlock *acb,
}
static void arcmsr_drain_donequeue(struct AdapterControlBlock *acb, struct CommandControlBlock *pCCB, bool error)
-
{
int id, lun;
if ((pCCB->acb != acb) || (pCCB->startdone != ARCMSR_CCB_START)) {
@@ -948,7 +946,7 @@ static void arcmsr_drain_donequeue(struct AdapterControlBlock *acb, struct Comma
, pCCB->startdone
, atomic_read(&acb->ccboutstandingcount));
return;
- }
+ }
arcmsr_report_ccb_state(acb, pCCB, error);
}
@@ -981,7 +979,7 @@ static void arcmsr_done4abort_postqueue(struct AdapterControlBlock *acb)
case ACB_ADAPTER_TYPE_B: {
struct MessageUnit_B *reg = acb->pmuB;
/*clear all outbound posted Q*/
- writel(ARCMSR_DOORBELL_INT_CLEAR_PATTERN, ®->iop2drv_doorbell); /* clear doorbell interrupt */
+ writel(ARCMSR_DOORBELL_INT_CLEAR_PATTERN, reg->iop2drv_doorbell); /* clear doorbell interrupt */
for (i = 0; i < ARCMSR_MAX_HBB_POSTQUEUE; i++) {
if ((flag_ccb = readl(®->done_qbuffer[i])) != 0) {
writel(0, ®->done_qbuffer[i]);
@@ -1511,7 +1509,6 @@ static void arcmsr_hba_postqueue_isr(struct AdapterControlBlock *acb)
arcmsr_drain_donequeue(acb, pCCB, error);
}
}
-
static void arcmsr_hbb_postqueue_isr(struct AdapterControlBlock *acb)
{
uint32_t index;
@@ -2106,10 +2103,6 @@ static int arcmsr_queue_command_lck(struct scsi_cmnd *cmd,
if (atomic_read(&acb->ccboutstandingcount) >=
ARCMSR_MAX_OUTSTANDING_CMD)
return SCSI_MLQUEUE_HOST_BUSY;
- if ((scsicmd == SCSI_CMD_ARECA_SPECIFIC)) {
- printk(KERN_NOTICE "Receiveing SCSI_CMD_ARECA_SPECIFIC command..\n");
- return 0;
- }
ccb = arcmsr_get_freeccb(acb);
if (!ccb)
return SCSI_MLQUEUE_HOST_BUSY;
@@ -2393,6 +2386,7 @@ static int arcmsr_polling_hbb_ccbdone(struct AdapterControlBlock *acb,
int index, rtn;
bool error;
polling_hbb_ccb_retry:
+
poll_count++;
/* clear doorbell interrupt */
writel(ARCMSR_DOORBELL_INT_CLEAR_PATTERN, reg->iop2drv_doorbell);
@@ -2663,6 +2657,7 @@ static void arcmsr_request_hba_device_map(struct AdapterControlBlock *acb)
{
struct MessageUnit_A __iomem *reg = acb->pmuA;
if (unlikely(atomic_read(&acb->rq_map_token) == 0) || ((acb->acb_flags & ACB_F_BUS_RESET) != 0 ) || ((acb->acb_flags & ACB_F_ABORT) != 0 )){
+ mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ));
return;
} else {
acb->fw_flag = FW_NORMAL;
@@ -2670,8 +2665,10 @@ static void arcmsr_request_hba_device_map(struct AdapterControlBlock *acb)
atomic_set(&acb->rq_map_token, 16);
}
atomic_set(&acb->ante_token_value, atomic_read(&acb->rq_map_token));
- if (atomic_dec_and_test(&acb->rq_map_token))
+ if (atomic_dec_and_test(&acb->rq_map_token)) {
+ mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ));
return;
+ }
writel(ARCMSR_INBOUND_MESG0_GET_CONFIG, ®->inbound_msgaddr0);
mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ));
}
@@ -2682,15 +2679,18 @@ static void arcmsr_request_hbb_device_map(struct AdapterControlBlock *acb)
{
struct MessageUnit_B __iomem *reg = acb->pmuB;
if (unlikely(atomic_read(&acb->rq_map_token) == 0) || ((acb->acb_flags & ACB_F_BUS_RESET) != 0 ) || ((acb->acb_flags & ACB_F_ABORT) != 0 )){
+ mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ));
return;
} else {
acb->fw_flag = FW_NORMAL;
if (atomic_read(&acb->ante_token_value) == atomic_read(&acb->rq_map_token)) {
- atomic_set(&acb->rq_map_token,16);
+ atomic_set(&acb->rq_map_token, 16);
}
atomic_set(&acb->ante_token_value, atomic_read(&acb->rq_map_token));
- if(atomic_dec_and_test(&acb->rq_map_token))
+ if (atomic_dec_and_test(&acb->rq_map_token)) {
+ mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ));
return;
+ }
writel(ARCMSR_MESSAGE_GET_CONFIG, reg->drv2iop_doorbell);
mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ));
}
@@ -2701,6 +2701,7 @@ static void arcmsr_request_hbc_device_map(struct AdapterControlBlock *acb)
{
struct MessageUnit_C __iomem *reg = acb->pmuC;
if (unlikely(atomic_read(&acb->rq_map_token) == 0) || ((acb->acb_flags & ACB_F_BUS_RESET) != 0) || ((acb->acb_flags & ACB_F_ABORT) != 0)) {
+ mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ));
return;
} else {
acb->fw_flag = FW_NORMAL;
@@ -2708,8 +2709,10 @@ static void arcmsr_request_hbc_device_map(struct AdapterControlBlock *acb)
atomic_set(&acb->rq_map_token, 16);
}
atomic_set(&acb->ante_token_value, atomic_read(&acb->rq_map_token));
- if (atomic_dec_and_test(&acb->rq_map_token))
+ if (atomic_dec_and_test(&acb->rq_map_token)) {
+ mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ));
return;
+ }
writel(ARCMSR_INBOUND_MESG0_GET_CONFIG, ®->inbound_msgaddr0);
writel(ARCMSR_HBCMU_DRV2IOP_MESSAGE_CMD_DONE, ®->inbound_doorbell);
mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ));
@@ -2897,6 +2900,8 @@ static uint8_t arcmsr_iop_reset(struct AdapterControlBlock *acb)
uint32_t intmask_org;
uint8_t rtnval = 0x00;
int i = 0;
+ unsigned long flags;
+
if (atomic_read(&acb->ccboutstandingcount) != 0) {
/* disable all outbound interrupt */
intmask_org = arcmsr_disable_outbound_ints(acb);
@@ -2907,7 +2912,12 @@ static uint8_t arcmsr_iop_reset(struct AdapterControlBlock *acb)
for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) {
ccb = acb->pccb_pool[i];
if (ccb->startdone == ARCMSR_CCB_START) {
- arcmsr_ccb_complete(ccb);
+ scsi_dma_unmap(ccb->pcmd);
+ ccb->startdone = ARCMSR_CCB_DONE;
+ ccb->ccb_flags = 0;
+ spin_lock_irqsave(&acb->ccblist_lock, flags);
+ list_add_tail(&ccb->list, &acb->ccb_free_list);
+ spin_unlock_irqrestore(&acb->ccblist_lock, flags);
}
}
atomic_set(&acb->ccboutstandingcount, 0);
@@ -2920,8 +2930,7 @@ static uint8_t arcmsr_iop_reset(struct AdapterControlBlock *acb)
static int arcmsr_bus_reset(struct scsi_cmnd *cmd)
{
- struct AdapterControlBlock *acb =
- (struct AdapterControlBlock *)cmd->device->host->hostdata;
+ struct AdapterControlBlock *acb;
uint32_t intmask_org, outbound_doorbell;
int retry_count = 0;
int rtn = FAILED;
@@ -2971,31 +2980,16 @@ sleep_again:
atomic_set(&acb->rq_map_token, 16);
atomic_set(&acb->ante_token_value, 16);
acb->fw_flag = FW_NORMAL;
- init_timer(&acb->eternal_timer);
- acb->eternal_timer.expires = jiffies + msecs_to_jiffies(6*HZ);
- acb->eternal_timer.data = (unsigned long) acb;
- acb->eternal_timer.function = &arcmsr_request_device_map;
- add_timer(&acb->eternal_timer);
+ mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ));
acb->acb_flags &= ~ACB_F_BUS_RESET;
rtn = SUCCESS;
printk(KERN_ERR "arcmsr: scsi bus reset eh returns with success\n");
} else {
acb->acb_flags &= ~ACB_F_BUS_RESET;
- if (atomic_read(&acb->rq_map_token) == 0) {
- atomic_set(&acb->rq_map_token, 16);
- atomic_set(&acb->ante_token_value, 16);
- acb->fw_flag = FW_NORMAL;
- init_timer(&acb->eternal_timer);
- acb->eternal_timer.expires = jiffies + msecs_to_jiffies(6*HZ);
- acb->eternal_timer.data = (unsigned long) acb;
- acb->eternal_timer.function = &arcmsr_request_device_map;
- add_timer(&acb->eternal_timer);
- } else {
- atomic_set(&acb->rq_map_token, 16);
- atomic_set(&acb->ante_token_value, 16);
- acb->fw_flag = FW_NORMAL;
- mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6*HZ));
- }
+ atomic_set(&acb->rq_map_token, 16);
+ atomic_set(&acb->ante_token_value, 16);
+ acb->fw_flag = FW_NORMAL;
+ mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6*HZ));
rtn = SUCCESS;
}
break;
@@ -3007,21 +3001,10 @@ sleep_again:
rtn = FAILED;
} else {
acb->acb_flags &= ~ACB_F_BUS_RESET;
- if (atomic_read(&acb->rq_map_token) == 0) {
- atomic_set(&acb->rq_map_token, 16);
- atomic_set(&acb->ante_token_value, 16);
- acb->fw_flag = FW_NORMAL;
- init_timer(&acb->eternal_timer);
- acb->eternal_timer.expires = jiffies + msecs_to_jiffies(6*HZ);
- acb->eternal_timer.data = (unsigned long) acb;
- acb->eternal_timer.function = &arcmsr_request_device_map;
- add_timer(&acb->eternal_timer);
- } else {
- atomic_set(&acb->rq_map_token, 16);
- atomic_set(&acb->ante_token_value, 16);
- acb->fw_flag = FW_NORMAL;
- mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6*HZ));
- }
+ atomic_set(&acb->rq_map_token, 16);
+ atomic_set(&acb->ante_token_value, 16);
+ acb->fw_flag = FW_NORMAL;
+ mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ));
rtn = SUCCESS;
}
break;
@@ -3067,31 +3050,16 @@ sleep:
atomic_set(&acb->rq_map_token, 16);
atomic_set(&acb->ante_token_value, 16);
acb->fw_flag = FW_NORMAL;
- init_timer(&acb->eternal_timer);
- acb->eternal_timer.expires = jiffies + msecs_to_jiffies(6 * HZ);
- acb->eternal_timer.data = (unsigned long) acb;
- acb->eternal_timer.function = &arcmsr_request_device_map;
- add_timer(&acb->eternal_timer);
+ mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ));
acb->acb_flags &= ~ACB_F_BUS_RESET;
rtn = SUCCESS;
printk(KERN_ERR "arcmsr: scsi bus reset eh returns with success\n");
} else {
acb->acb_flags &= ~ACB_F_BUS_RESET;
- if (atomic_read(&acb->rq_map_token) == 0) {
- atomic_set(&acb->rq_map_token, 16);
- atomic_set(&acb->ante_token_value, 16);
- acb->fw_flag = FW_NORMAL;
- init_timer(&acb->eternal_timer);
- acb->eternal_timer.expires = jiffies + msecs_to_jiffies(6*HZ);
- acb->eternal_timer.data = (unsigned long) acb;
- acb->eternal_timer.function = &arcmsr_request_device_map;
- add_timer(&acb->eternal_timer);
- } else {
- atomic_set(&acb->rq_map_token, 16);
- atomic_set(&acb->ante_token_value, 16);
- acb->fw_flag = FW_NORMAL;
- mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6*HZ));
- }
+ atomic_set(&acb->rq_map_token, 16);
+ atomic_set(&acb->ante_token_value, 16);
+ acb->fw_flag = FW_NORMAL;
+ mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6*HZ));
rtn = SUCCESS;
}
break;
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 5815cbe..9a7aaf5 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -646,6 +646,7 @@ void sas_scsi_recover_host(struct Scsi_Host *shost)
spin_lock_irqsave(shost->host_lock, flags);
list_splice_init(&shost->eh_cmd_q, &eh_work_q);
+ shost->host_eh_scheduled = 0;
spin_unlock_irqrestore(shost->host_lock, flags);
SAS_DPRINTK("Enter %s\n", __func__);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index b2a8170..9ead039 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -2176,9 +2176,9 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
/* adjust hba_queue_depth, reply_free_queue_depth,
* and queue_size
*/
- ioc->hba_queue_depth -= queue_diff;
- ioc->reply_free_queue_depth -= queue_diff;
- queue_size -= queue_diff;
+ ioc->hba_queue_depth -= (queue_diff / 2);
+ ioc->reply_free_queue_depth -= (queue_diff / 2);
+ queue_size = facts->MaxReplyDescriptorPostQueueDepth;
}
ioc->reply_post_queue_depth = queue_size;
@@ -3941,6 +3941,8 @@ mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc)
static void
_base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
{
+ mpt2sas_scsih_reset_handler(ioc, reset_phase);
+ mpt2sas_ctl_reset_handler(ioc, reset_phase);
switch (reset_phase) {
case MPT2_IOC_PRE_RESET:
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
@@ -3971,8 +3973,6 @@ _base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
"MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
break;
}
- mpt2sas_scsih_reset_handler(ioc, reset_phase);
- mpt2sas_ctl_reset_handler(ioc, reset_phase);
}
/**
@@ -4026,6 +4026,7 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
{
int r;
unsigned long flags;
+ u8 pe_complete = ioc->wait_for_port_enable_to_complete;
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
__func__));
@@ -4068,6 +4069,14 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
if (r)
goto out;
_base_reset_handler(ioc, MPT2_IOC_AFTER_RESET);
+
+ /* If this hard reset is called while port enable is active, then
+ * there is no reason to call make_ioc_operational
+ */
+ if (pe_complete) {
+ r = -EFAULT;
+ goto out;
+ }
r = _base_make_ioc_operational(ioc, sleep_flag);
if (!r)
_base_reset_handler(ioc, MPT2_IOC_DONE_RESET);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index eda347c..5ded3db 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -819,7 +819,7 @@ _scsih_is_end_device(u32 device_info)
}
/**
- * mptscsih_get_scsi_lookup - returns scmd entry
+ * _scsih_scsi_lookup_get - returns scmd entry
* @ioc: per adapter object
* @smid: system request message index
*
@@ -832,6 +832,28 @@ _scsih_scsi_lookup_get(struct MPT2SAS_ADAPTER *ioc, u16 smid)
}
/**
+ * _scsih_scsi_lookup_get_clear - returns scmd entry
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns the smid stored scmd pointer.
+ * Then will derefrence the stored scmd pointer.
+ */
+static inline struct scsi_cmnd *
+_scsih_scsi_lookup_get_clear(struct MPT2SAS_ADAPTER *ioc, u16 smid)
+{
+ unsigned long flags;
+ struct scsi_cmnd *scmd;
+
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ scmd = ioc->scsi_lookup[smid - 1].scmd;
+ ioc->scsi_lookup[smid - 1].scmd = NULL;
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+
+ return scmd;
+}
+
+/**
* _scsih_scsi_lookup_find_by_scmd - scmd lookup
* @ioc: per adapter object
* @smid: system request message index
@@ -2981,9 +3003,6 @@ _scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc,
u16 handle;
for (i = 0 ; i < event_data->NumEntries; i++) {
- if (event_data->PHY[i].PhyStatus &
- MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT)
- continue;
handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
if (!handle)
continue;
@@ -3210,7 +3229,7 @@ _scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc)
u16 count = 0;
for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
- scmd = _scsih_scsi_lookup_get(ioc, smid);
+ scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
if (!scmd)
continue;
count++;
@@ -3804,7 +3823,7 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
u32 response_code = 0;
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
- scmd = _scsih_scsi_lookup_get(ioc, smid);
+ scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
if (scmd == NULL)
return 1;
@@ -5005,6 +5024,12 @@ _scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc,
event_data);
#endif
+ /* In MPI Revision K (0xC), the internal device reset complete was
+ * implemented, so avoid setting tm_busy flag for older firmware.
+ */
+ if ((ioc->facts.HeaderVersion >> 8) < 0xC)
+ return;
+
if (event_data->ReasonCode !=
MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET &&
event_data->ReasonCode !=
@@ -5099,6 +5124,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc,
struct fw_event_work *fw_event)
{
struct scsi_cmnd *scmd;
+ struct scsi_device *sdev;
u16 smid, handle;
u32 lun;
struct MPT2SAS_DEVICE *sas_device_priv_data;
@@ -5109,12 +5135,17 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc,
Mpi2EventDataSasBroadcastPrimitive_t *event_data = fw_event->event_data;
#endif
u16 ioc_status;
+ unsigned long flags;
+ int r;
+
dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "broadcast primative: "
"phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum,
event_data->PortWidth));
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
__func__));
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ ioc->broadcast_aen_busy = 0;
termination_count = 0;
query_count = 0;
mpi_reply = ioc->tm_cmds.reply;
@@ -5122,7 +5153,8 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc,
scmd = _scsih_scsi_lookup_get(ioc, smid);
if (!scmd)
continue;
- sas_device_priv_data = scmd->device->hostdata;
+ sdev = scmd->device;
+ sas_device_priv_data = sdev->hostdata;
if (!sas_device_priv_data || !sas_device_priv_data->sas_target)
continue;
/* skip hidden raid components */
@@ -5138,6 +5170,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc,
lun = sas_device_priv_data->lun;
query_count++;
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
mpt2sas_scsih_issue_tm(ioc, handle, 0, 0, lun,
MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30, NULL);
ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
@@ -5147,14 +5180,20 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc,
(mpi_reply->ResponseCode ==
MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED ||
mpi_reply->ResponseCode ==
- MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC))
+ MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC)) {
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
continue;
-
- mpt2sas_scsih_issue_tm(ioc, handle, 0, 0, lun,
- MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, 0, 30, NULL);
+ }
+ r = mpt2sas_scsih_issue_tm(ioc, handle, sdev->channel, sdev->id,
+ sdev->lun, MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30,
+ scmd);
+ if (r == FAILED)
+ sdev_printk(KERN_WARNING, sdev, "task abort: FAILED "
+ "scmd(%p)\n", scmd);
termination_count += le32_to_cpu(mpi_reply->TerminationCount);
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
}
- ioc->broadcast_aen_busy = 0;
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT
"%s - exit, query_count = %d termination_count = %d\n",
@@ -6626,6 +6665,7 @@ _scsih_remove(struct pci_dev *pdev)
destroy_workqueue(wq);
/* release all the volumes */
+ _scsih_ir_shutdown(ioc);
list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list,
list) {
if (raid_device->starget) {
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 648d233..b76d400 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -9,6 +9,7 @@
#define _SCSI_SCSI_H
#include <linux/types.h>
+#include <linux/scatterlist.h>
struct scsi_cmnd;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists