| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1296693467-4465-1-git-send-email-tomoya-linux@dsn.okisemi.com>
Date: Thu, 3 Feb 2011 09:37:47 +0900
From: Tomoya MORINAGA <tomoya-linux@....okisemi.com>
To: Jean Delvare <khali@...ux-fr.org>, Ben Dooks <ben-linux@...ff.org>,
Seth Heasley <seth.heasley@...el.com>,
Linus Walleij <linus.walleij@...ricsson.com>,
Samuel Ortiz <sameo@...ux.intel.com>,
linux-i2c@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: qi.wang@...el.com, yong.y.wang@...el.com, joel.clark@...el.com,
kok.howg.ewe@...el.com, toshiharu-linux@....okisemi.com,
Tomoya MORINAGA <tomoya-linux@....okisemi.com>
Subject: [PATCH] i2c-eg20t: support new devie ML7213 IOH
Support ML7213 device of OKI SEMICONDUCTOR.
ML7213 is companion chip of Intel Atom E6xx series for IVI(In-Vehicle Infotainment).
ML7213 is completely compatible for Intel EG20T PCH.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@....okisemi.com>
---
drivers/i2c/busses/Kconfig | 17 +++--
drivers/i2c/busses/i2c-eg20t.c | 158 +++++++++++++++++++++++++---------------
2 files changed, 109 insertions(+), 66 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 113505a..8086d49 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -639,12 +639,17 @@ config I2C_XILINX
will be called xilinx_i2c.
config I2C_EG20T
- tristate "PCH I2C of Intel EG20T"
- depends on PCI
- help
- This driver is for PCH(Platform controller Hub) I2C of EG20T which
- is an IOH(Input/Output Hub) for x86 embedded processor.
- This driver can access PCH I2C bus device.
+ tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH"
+ depends on PCI
+ help
+ This driver is for PCH(Platform controller Hub) I2C of EG20T which
+ is an IOH(Input/Output Hub) for x86 embedded processor.
+ This driver can access PCH I2C bus device.
+
+ This driver also can be used for OKI SEMICONDUCTOR's ML7213 IOH which
+ is for IVI(In-Vehicle Infotainment) use.
+ ML7213 IOH is companion chip for Intel Atom E6xx series.
+ ML7213 IOH is completely compatible for Intel EG20T PCH.
comment "External I2C/SMBus adapter drivers"
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index 50ea1f4..d4beed5 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -132,6 +132,13 @@
#define pch_pci_dbg(pdev, fmt, arg...) \
dev_dbg(&pdev->dev, "%s :" fmt, __func__, ##arg)
+/*
+Set the number of I2C instance max
+Intel EG20T PCH : 1ch
+OKI SEMICONDUCTOR ML7213 IOH : 2ch
+*/
+#define PCH_I2C_MAX_DEV 2
+
/**
* struct i2c_algo_pch_data - for I2C driver functionalities
* @pch_adapter: stores the reference to i2c_adapter structure
@@ -156,12 +163,14 @@ struct i2c_algo_pch_data {
* @pch_data: stores a list of i2c_algo_pch_data
* @pch_i2c_suspended: specifies whether the system is suspended or not
* perhaps with more lines and words.
+ * @ch_num: specifies the number of i2c instance
*
* pch_data has as many elements as maximum I2C channels
*/
struct adapter_info {
- struct i2c_algo_pch_data pch_data;
+ struct i2c_algo_pch_data pch_data[PCH_I2C_MAX_DEV];
bool pch_i2c_suspended;
+ int ch_num;
};
@@ -170,8 +179,13 @@ static int pch_clk = 50000; /* specifies I2C clock speed in KHz */
static wait_queue_head_t pch_event;
static DEFINE_MUTEX(pch_mutex);
+/* Definition for ML7213 by OKI SEMICONDUCTOR */
+#define PCI_VENDOR_ID_ROHM 0x10DB
+#define PCI_DEVICE_ID_ML7213_I2C 0x802D
+
static struct pci_device_id __devinitdata pch_pcidev_id[] = {
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH_I2C)},
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_I2C), 1, },
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_I2C), 2, },
{0,}
};
@@ -212,8 +226,7 @@ static void pch_i2c_init(struct i2c_algo_pch_data *adap)
/* Initialize I2C registers */
iowrite32(0x21, p + PCH_I2CNF);
- pch_setbit(adap->pch_base_address, PCH_I2CCTL,
- PCH_I2CCTL_I2CMEN);
+ pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_I2CCTL_I2CMEN);
if (pch_i2c_speed != 400)
pch_i2c_speed = 100;
@@ -255,7 +268,7 @@ static inline bool ktime_lt(const ktime_t cmp1, const ktime_t cmp2)
* @timeout: waiting time counter (us).
*/
static s32 pch_i2c_wait_for_bus_idle(struct i2c_algo_pch_data *adap,
- s32 timeout)
+ s32 timeout)
{
void __iomem *p = adap->pch_base_address;
@@ -475,8 +488,8 @@ static void pch_i2c_sendnack(struct i2c_algo_pch_data *adap)
* @last: specifies whether last message or not.
* @first: specifies whether first message or not.
*/
-s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
- u32 last, u32 first)
+static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
+ u32 last, u32 first)
{
struct i2c_algo_pch_data *adap = i2c_adap->algo_data;
@@ -569,10 +582,10 @@ s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
}
/**
- * pch_i2c_cb_ch0() - Interrupt handler Call back function
+ * pch_i2c_cb() - Interrupt handler Call back function
* @adap: Pointer to struct i2c_algo_pch_data.
*/
-static void pch_i2c_cb_ch0(struct i2c_algo_pch_data *adap)
+static void pch_i2c_cb(struct i2c_algo_pch_data *adap)
{
u32 sts;
void __iomem *p = adap->pch_base_address;
@@ -600,24 +613,31 @@ static void pch_i2c_cb_ch0(struct i2c_algo_pch_data *adap)
*/
static irqreturn_t pch_i2c_handler(int irq, void *pData)
{
- s32 reg_val;
-
- struct i2c_algo_pch_data *adap_data = (struct i2c_algo_pch_data *)pData;
- void __iomem *p = adap_data->pch_base_address;
- u32 mode = ioread32(p + PCH_I2CMOD) & (BUFFER_MODE | EEPROM_SR_MODE);
-
- if (mode != NORMAL_MODE) {
- pch_err(adap_data, "I2C mode is not supported\n");
- return IRQ_NONE;
+ u32 reg_val;
+ int flag;
+ int i;
+ struct adapter_info *adap_info = pData;
+
+ void __iomem *p;
+ u32 mode;
+
+ for (i = 0, flag = 0; i < adap_info->ch_num; i++) {
+ p = adap_info->pch_data[i].pch_base_address;
+ mode = ioread32(p + PCH_I2CMOD) &
+ (BUFFER_MODE | EEPROM_SR_MODE);
+ if (mode != NORMAL_MODE) {
+ pch_err(adap_info->pch_data,
+ "I2C-%d mode(%d) is not supported\n", mode, i);
+ continue;
+ }
+ reg_val = ioread32(p + PCH_I2CSR);
+ if (reg_val & (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT)) {
+ pch_i2c_cb(&adap_info->pch_data[i]);
+ flag = 1;
+ }
}
- reg_val = ioread32(p + PCH_I2CSR);
- if (reg_val & (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT))
- pch_i2c_cb_ch0(adap_data);
- else
- return IRQ_NONE;
-
- return IRQ_HANDLED;
+ return flag ? IRQ_HANDLED : IRQ_NONE;
}
/**
@@ -627,7 +647,7 @@ static irqreturn_t pch_i2c_handler(int irq, void *pData)
* @num: number of messages.
*/
static s32 pch_i2c_xfer(struct i2c_adapter *i2c_adap,
- struct i2c_msg *msgs, s32 num)
+ struct i2c_msg *msgs, s32 num)
{
struct i2c_msg *pmsg;
u32 i = 0;
@@ -710,10 +730,11 @@ static void pch_i2c_disbl_int(struct i2c_algo_pch_data *adap)
}
static int __devinit pch_i2c_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
+ const struct pci_device_id *id)
{
void __iomem *base_addr;
- s32 ret;
+ int ret;
+ int i, j;
struct adapter_info *adap_info;
pch_pci_dbg(pdev, "Entered.\n");
@@ -744,32 +765,36 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev,
goto err_pci_iomap;
}
- adap_info->pch_i2c_suspended = false;
+ /* Set the number of I2C channel instance */
+ adap_info->ch_num = id->driver_data;
- adap_info->pch_data.p_adapter_info = adap_info;
+ for (i = 0; i < adap_info->ch_num; i++) {
+ adap_info->pch_i2c_suspended = false;
- adap_info->pch_data.pch_adapter.owner = THIS_MODULE;
- adap_info->pch_data.pch_adapter.class = I2C_CLASS_HWMON;
- strcpy(adap_info->pch_data.pch_adapter.name, KBUILD_MODNAME);
- adap_info->pch_data.pch_adapter.algo = &pch_algorithm;
- adap_info->pch_data.pch_adapter.algo_data =
- &adap_info->pch_data;
+ adap_info->pch_data[i].p_adapter_info = adap_info;
- /* (i * 0x80) + base_addr; */
- adap_info->pch_data.pch_base_address = base_addr;
+ adap_info->pch_data[i].pch_adapter.owner = THIS_MODULE;
+ adap_info->pch_data[i].pch_adapter.class = I2C_CLASS_HWMON;
+ strcpy(adap_info->pch_data[i].pch_adapter.name, KBUILD_MODNAME);
+ adap_info->pch_data[i].pch_adapter.algo = &pch_algorithm;
+ adap_info->pch_data[i].pch_adapter.algo_data =
+ &adap_info->pch_data[i];
- adap_info->pch_data.pch_adapter.dev.parent = &pdev->dev;
+ /* base_addr + offset; */
+ adap_info->pch_data[i].pch_base_address = base_addr + 0x100 * i;
- ret = i2c_add_adapter(&(adap_info->pch_data.pch_adapter));
+ adap_info->pch_data[i].pch_adapter.dev.parent = &pdev->dev;
- if (ret) {
- pch_pci_err(pdev, "i2c_add_adapter FAILED\n");
- goto err_i2c_add_adapter;
- }
+ ret = i2c_add_adapter(&(adap_info->pch_data[i].pch_adapter));
+ if (ret) {
+ pch_pci_err(pdev, "i2c_add_adapter FAILED\n");
+ goto err_i2c_add_adapter;
+ }
- pch_i2c_init(&adap_info->pch_data);
+ pch_i2c_init(&adap_info->pch_data[i]);
+ }
ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED,
- KBUILD_MODNAME, &adap_info->pch_data);
+ KBUILD_MODNAME, adap_info);
if (ret) {
pch_pci_err(pdev, "request_irq FAILED\n");
goto err_request_irq;
@@ -780,7 +805,8 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev,
return 0;
err_request_irq:
- i2c_del_adapter(&(adap_info->pch_data.pch_adapter));
+ for (j = 0; j < i; j++)
+ i2c_del_adapter(&(adap_info->pch_data[j].pch_adapter));
err_i2c_add_adapter:
pci_iounmap(pdev, base_addr);
err_pci_iomap:
@@ -794,17 +820,22 @@ err_pci_enable:
static void __devexit pch_i2c_remove(struct pci_dev *pdev)
{
+ int i;
struct adapter_info *adap_info = pci_get_drvdata(pdev);
- pch_i2c_disbl_int(&adap_info->pch_data);
- free_irq(pdev->irq, &adap_info->pch_data);
- i2c_del_adapter(&(adap_info->pch_data.pch_adapter));
+ free_irq(pdev->irq, adap_info);
- if (adap_info->pch_data.pch_base_address) {
- pci_iounmap(pdev, adap_info->pch_data.pch_base_address);
- adap_info->pch_data.pch_base_address = 0;
+ for (i = 0; i < adap_info->ch_num; i++) {
+ pch_i2c_disbl_int(&adap_info->pch_data[i]);
+ i2c_del_adapter(&(adap_info->pch_data[i].pch_adapter));
}
+ if (adap_info->pch_data[0].pch_base_address)
+ pci_iounmap(pdev, adap_info->pch_data[0].pch_base_address);
+
+ for (i = 0; i < adap_info->ch_num; i++)
+ adap_info->pch_data[i].pch_base_address = 0;
+
pci_set_drvdata(pdev, NULL);
pci_release_regions(pdev);
@@ -817,17 +848,22 @@ static void __devexit pch_i2c_remove(struct pci_dev *pdev)
static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state)
{
int ret;
+ int i;
struct adapter_info *adap_info = pci_get_drvdata(pdev);
- void __iomem *p = adap_info->pch_data.pch_base_address;
+ void __iomem *p = adap_info->pch_data[0].pch_base_address;
adap_info->pch_i2c_suspended = true;
- while ((adap_info->pch_data.pch_i2c_xfer_in_progress)) {
- /* Wait until all channel transfers are completed */
- msleep(20);
+ for (i = 0; i < adap_info->ch_num; i++) {
+ while ((adap_info->pch_data[i].pch_i2c_xfer_in_progress)) {
+ /* Wait until all channel transfers are completed */
+ msleep(20);
+ }
}
+
/* Disable the i2c interrupts */
- pch_i2c_disbl_int(&adap_info->pch_data);
+ for (i = 0; i < adap_info->ch_num; i++)
+ pch_i2c_disbl_int(&adap_info->pch_data[i]);
pch_pci_dbg(pdev, "I2CSR = %x I2CBUFSTA = %x I2CESRSTA = %x "
"invoked function pch_i2c_disbl_int successfully\n",
@@ -850,6 +886,7 @@ static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state)
static int pch_i2c_resume(struct pci_dev *pdev)
{
+ int i;
struct adapter_info *adap_info = pci_get_drvdata(pdev);
pci_set_power_state(pdev, PCI_D0);
@@ -862,7 +899,8 @@ static int pch_i2c_resume(struct pci_dev *pdev)
pci_enable_wake(pdev, PCI_D3hot, 0);
- pch_i2c_init(&adap_info->pch_data);
+ for (i = 0; i < adap_info->ch_num; i++)
+ pch_i2c_init(&adap_info->pch_data[i]);
adap_info->pch_i2c_suspended = false;
@@ -894,7 +932,7 @@ static void __exit pch_pci_exit(void)
}
module_exit(pch_pci_exit);
-MODULE_DESCRIPTION("PCH I2C PCI Driver");
+MODULE_DESCRIPTION("Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH I2C Driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Tomoya MORINAGA. <tomoya-linux@....okisemi.com>");
module_param(pch_i2c_speed, int, (S_IRUSR | S_IWUSR));
--
1.7.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists