| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4D4DFD9D.7020507@metafoo.de>
Date: Sun, 06 Feb 2011 02:47:09 +0100
From: Lars-Peter Clausen <lars@...afoo.de>
To: Anirudh Ghayal <aghayal@...eaurora.org>
CC: linux-kernel@...r.kernel.org, linux-input@...r.kernel.org,
rtc-linux@...glegroups.com, linux-arm-msm@...r.kernel.org,
Trilok Soni <tsoni@...eaurora.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>
Subject: Re: [RFC v2 PATCH 3/7] led: pmic8058: Add PMIC8058 leds driver
On 02/01/2011 02:47 PM, Anirudh Ghayal wrote:
> From: Trilok Soni <tsoni@...eaurora.org>
>
> Add support for Qualcomm PMIC8058 keyboard
> backlight, flash and low current leds.
>
> Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>
> Cc: Lars-Peter Clausen <lars@...afoo.de>
> Signed-off-by: Trilok Soni <tsoni@...eaurora.org>
> ---
> Changes from v1:
> Addressed review comments from Peter and Dmitry.
>
> drivers/leds/Kconfig | 11 ++
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-pmic8058.c | 360 +++++++++++++++++++++++++++++++++++++++++
> include/linux/leds-pmic8058.h | 61 +++++++
> 4 files changed, 433 insertions(+), 0 deletions(-)
> create mode 100644 drivers/leds/leds-pmic8058.c
> create mode 100644 include/linux/leds-pmic8058.h
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 6f190f4..235a1e5 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -250,6 +250,17 @@ config LEDS_PCA955X
> LED driver chips accessed via the I2C bus. Supported
> devices include PCA9550, PCA9551, PCA9552, and PCA9553.
>
> +config LEDS_PMIC8058
> + tristate "LED Support for Qualcomm PMIC8058"
> + depends on PMIC8058
> + help
> + This option enables support for LEDs connected over PMIC8058
> + (Power Management IC) chip on Qualcomm reference boards,
> + for example SURF and FFAs.
> +
> + To compile this driver as a module, choose M here: the module will
> + be called leds-pmic8058.
> +
> config LEDS_WM831X_STATUS
> tristate "LED support for status LEDs on WM831x PMICs"
> depends on LEDS_CLASS
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index aae6989..9706739 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -21,6 +21,7 @@ obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o
> obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
> obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
> obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
> +obj-$(CONFIG_LEDS_PMIC8058) += leds-pmic8058.o
> obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
> obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
> obj-$(CONFIG_LEDS_LP5521) += leds-lp5521.o
> diff --git a/drivers/leds/leds-pmic8058.c b/drivers/leds/leds-pmic8058.c
> new file mode 100644
> index 0000000..fb3d7be
> --- /dev/null
> +++ b/drivers/leds/leds-pmic8058.c
> @@ -0,0 +1,360 @@
> +/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
> + * 02110-1301, USA.
> + */
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/platform_device.h>
> +#include <linux/leds.h>
> +#include <linux/workqueue.h>
> +#include <linux/spinlock.h>
> +#include <linux/mfd/pmic8058.h>
> +#include <linux/leds-pmic8058.h>
> +
> +#define SSBI_REG_ADDR_DRV_KEYPAD 0x48
> +#define PM8058_DRV_KEYPAD_BL_MASK 0xf0
> +#define PM8058_DRV_KEYPAD_BL_SHIFT 0x04
> +
> +#define SSBI_REG_ADDR_FLASH_DRV0 0x49
> +#define PM8058_DRV_FLASH_MASK 0xf0
> +#define PM8058_DRV_FLASH_SHIFT 0x04
> +
> +#define SSBI_REG_ADDR_FLASH_DRV1 0xFB
> +
> +#define SSBI_REG_ADDR_LED_CTRL_BASE 0x131
> +#define SSBI_REG_ADDR_LED_CTRL(n) (SSBI_REG_ADDR_LED_CTRL_BASE + (n))
> +#define PM8058_DRV_LED_CTRL_MASK 0xf8
> +#define PM8058_DRV_LED_CTRL_SHIFT 0x03
> +
> +#define MAX_FLASH_LED_CURRENT 300
> +#define MAX_LC_LED_CURRENT 40
> +#define MAX_KP_BL_LED_CURRENT 300
> +
> +#define MAX_KEYPAD_BL_LEVEL (1 << 4)
> +#define MAX_LED_DRV_LEVEL 20 /* 2 * 20 mA */
> +
> +#define PMIC8058_LED_OFFSET(id) ((id) - PMIC8058_ID_LED_0)
> +
> +#define MAX_KB_LED_BRIGHTNESS 15
> +#define MAX_LC_LED_BRIGHTNESS 20
> +#define MAX_FLASH_LED_BRIGHTNESS 15
> +
> +#define PMIC8058_MAX_LEDS 7
> +
> +/**
> + * struct pmic8058_led_data - internal led data structure
> + * @led_classdev - led class device
> + * @id - led index
> + * @led_brightness - led brightness levels
> + * @pm_chip - parent MFD core device
> + * @work - workqueue for led
> + * @lock - to protect the transactions
> + * @reg - cached value of led register
> + */
> +struct pmic8058_led_data {
> + struct led_classdev cdev;
> + int id;
> + u8 reg;
> + enum led_brightness brightness;
> + struct pm8058_chip *pm_chip;
> + struct work_struct work;
> + struct mutex lock;
> +};
> +
> +#define PM8058_MAX_LEDS 7
This is unused
> +
> +static void led_kp_set(struct pmic8058_led_data *led, enum led_brightness value)
> +{
> + int rc;
> + u8 level;
> +
> + level = (value << PM8058_DRV_KEYPAD_BL_SHIFT) &
> + PM8058_DRV_KEYPAD_BL_MASK;
> +
> + led->reg &= ~PM8058_DRV_KEYPAD_BL_MASK;
> + led->reg |= level;
> +
> + rc = pm8058_write(led->pm_chip, SSBI_REG_ADDR_DRV_KEYPAD,
> + &led->reg, 1);
> + if (rc < 0)
> + dev_err(led->cdev.dev, "can't set keypad backlight level\n");
> +}
> +
> +static void led_lc_set(struct pmic8058_led_data *led, enum led_brightness value)
> +{
> + int rc, offset;
> + u8 level;
> +
> + level = (value << PM8058_DRV_LED_CTRL_SHIFT) &
> + PM8058_DRV_LED_CTRL_MASK;
> +
> + offset = PMIC8058_LED_OFFSET(led->id);
> +
> + led->reg &= ~PM8058_DRV_LED_CTRL_MASK;
> + led->reg |= level;
> +
> + rc = pm8058_write(led->pm_chip, SSBI_REG_ADDR_LED_CTRL(offset),
> + &led->reg, 1);
> + if (rc)
> + dev_err(led->cdev.dev, "can't set (%d) led value\n",
> + led->id);
> +}
> +
> +static void
> +led_flash_set(struct pmic8058_led_data *led, enum led_brightness value)
> +{
> + int rc;
> + u8 level;
> + u16 reg_addr;
> +
> + level = (value << PM8058_DRV_FLASH_SHIFT) &
> + PM8058_DRV_FLASH_MASK;
> +
> + led->reg &= ~PM8058_DRV_FLASH_MASK;
> + led->reg |= level;
> +
> + if (led->id == PMIC8058_ID_FLASH_LED_0)
> + reg_addr = SSBI_REG_ADDR_FLASH_DRV0;
> + else
> + reg_addr = SSBI_REG_ADDR_FLASH_DRV1;
> +
> + rc = pm8058_write(led->pm_chip, reg_addr, &led->reg, 1);
> + if (rc < 0)
> + dev_err(led->cdev.dev, "can't set flash led%d level\n",
> + led->id);
> +}
> +
> +static void pmic8058_led_work(struct work_struct *work)
> +{
> + struct pmic8058_led_data *led = container_of(work,
> + struct pmic8058_led_data, work);
> +
> + mutex_lock(&led->lock);
> +
> + switch (led->id) {
> + case PMIC8058_ID_LED_KB_LIGHT:
> + led_kp_set(led, led->brightness);
> + break;
> + case PMIC8058_ID_LED_0:
> + case PMIC8058_ID_LED_1:
> + case PMIC8058_ID_LED_2:
> + led_lc_set(led, led->brightness);
> + break;
> + case PMIC8058_ID_FLASH_LED_0:
> + case PMIC8058_ID_FLASH_LED_1:
> + led_flash_set(led, led->brightness);
> + break;
> + }
> +
> + mutex_unlock(&led->lock);
> +}
> +
> +static void pmic8058_led_set(struct led_classdev *led_cdev,
> + enum led_brightness value)
> +{
> + struct pmic8058_led_data *led;
> +
> + led = container_of(led_cdev, struct pmic8058_led_data, cdev);
> +
> + led->brightness = value;
> + schedule_work(&led->work);
As discussed last time it might be a good idea to schedule the work on the
system_nrt_wq work queue and remove the mutex in the work function.
> +}
> +
> +static enum led_brightness pmic8058_led_get(struct led_classdev *led_cdev)
> +{
> + struct pmic8058_led_data *led;
> +
> + led = container_of(led_cdev, struct pmic8058_led_data, cdev);
> +
> + return led->brightness;
> +}
> +
> +static int get_max_brightness(enum pmic8058_leds id)
> +{
> + switch (id) {
> + case PMIC8058_ID_LED_KB_LIGHT:
> + return MAX_KB_LED_BRIGHTNESS;
> + case PMIC8058_ID_LED_0:
> + case PMIC8058_ID_LED_1:
> + case PMIC8058_ID_LED_2:
> + return MAX_LC_LED_BRIGHTNESS;
> + case PMIC8058_ID_FLASH_LED_0:
> + case PMIC8058_ID_FLASH_LED_1:
> + return MAX_FLASH_LED_CURRENT;
> + default:
> + return 0;
> + }
> +}
> +
> +static int get_init_value(struct pmic8058_led_data *led, u8 *val)
> +{
> + int rc, offset;
> + u16 addr;
> +
> + switch (led->id) {
> + case PMIC8058_ID_LED_KB_LIGHT:
> + addr = SSBI_REG_ADDR_DRV_KEYPAD;
> + break;
> + case PMIC8058_ID_LED_0:
> + case PMIC8058_ID_LED_1:
> + case PMIC8058_ID_LED_2:
> + offset = PMIC8058_LED_OFFSET(led->id);
> + addr = SSBI_REG_ADDR_LED_CTRL(offset);
> + break;
> + case PMIC8058_ID_FLASH_LED_0:
> + addr = SSBI_REG_ADDR_FLASH_DRV0;
> + break;
> + case PMIC8058_ID_FLASH_LED_1:
> + addr = SSBI_REG_ADDR_FLASH_DRV1;
> + break;
> + }
> +
> + rc = pm8058_read(led->pm_chip, addr, val, 1);
> + if (rc)
> + dev_err(led->cdev.dev, "can't get led(%d) level\n", led->id);
> +
> + return rc;
> +}
> +
> +static int __devinit pmic8058_led_probe(struct platform_device *pdev)
> +{
> + const struct pmic8058_leds_platform_data *pdata =
> + pdev->dev.platform_data;
> + struct pmic8058_led_data *led_dat;
> + struct pmic8058_led *curr_led;
> + int rc, i;
> + struct pm8058_chip *pm_chip;
> + struct pmic8058_led_data *led;
> +
> + pm_chip = platform_get_drvdata(pdev);
> + if (pm_chip == NULL) {
> + dev_err(&pdev->dev, "no parent data passed in\n");
> + return -EINVAL;
> + }
> +
> + if (pdata == NULL) {
> + dev_err(&pdev->dev, "platform data not supplied\n");
> + return -EINVAL;
> + }
> +
> + if (pdata->num_leds > PMIC8058_MAX_LEDS) {
> + dev_err(&pdev->dev, "can't handle more than %d LEDs\n",
> + PMIC8058_MAX_LEDS);
> + return -EFAULT;
> + }
> +
> + led = kcalloc(pdata->num_leds, sizeof(*led), GFP_KERNEL);
> + if (led == NULL) {
> + dev_err(&pdev->dev, "failed to alloc memory\n");
> + return -ENOMEM;
> + }
> +
> + for (i = 0; i < pdata->num_leds; i++) {
> + curr_led = &pdata->leds[i];
> + led_dat = &led[curr_led->id];
> +
> + led_dat->id = curr_led->id;
> +
> + if (!((led_dat->id >= PMIC8058_ID_LED_KB_LIGHT) &&
> + (led_dat->id <= PMIC8058_ID_FLASH_LED_1))) {
> + dev_err(&pdev->dev, "invalid LED ID (%d) specified\n",
> + led_dat->id);
> + rc = -EINVAL;
> + goto fail_id_check;
> + }
> +
> + led_dat->cdev.name = curr_led->name;
> + led_dat->cdev.default_trigger = curr_led->default_trigger;
> + led_dat->cdev.brightness_set = pmic8058_led_set;
> + led_dat->cdev.brightness_get = pmic8058_led_get;
> + led_dat->cdev.brightness = LED_OFF;
> + led_dat->cdev.flags = LED_CORE_SUSPENDRESUME;
> +
> + led_dat->cdev.max_brightness = get_max_brightness(led_dat->id);
> + led_dat->pm_chip = pm_chip;
> +
> + rc = get_init_value(led_dat, &led_dat->reg);
> + if (rc < 0)
> + goto fail_id_check;
> +
> + mutex_init(&led_dat->lock);
> + INIT_WORK(&led_dat->work, pmic8058_led_work);
> +
> + rc = led_classdev_register(&pdev->dev, &led_dat->cdev);
> + if (rc) {
> + dev_err(&pdev->dev, "unable to register led %d\n",
> + led_dat->id);
> + goto fail_id_check;
> + }
> + }
> +
> + platform_set_drvdata(pdev, led);
> +
> + return 0;
> +
> +fail_id_check:
> + if (i > 0) {
> + for (i = i - 1; i >= 0; i--)
> + led_classdev_unregister(&led[i].cdev);
> + }
> + kfree(led);
> + return rc;
> +}
> +
> +static int __devexit pmic8058_led_remove(struct platform_device *pdev)
> +{
> + int i;
> + const struct pmic8058_leds_platform_data *pdata =
> + pdev->dev.platform_data;
> + struct pmic8058_led_data *led = platform_get_drvdata(pdev);
> +
> + for (i = 0; i < pdata->num_leds; i++) {
> + mutex_destroy(&led[led->id].lock);
Since the mutex is used in the work function it should be destroyed after canceling
the work.
> + led_classdev_unregister(&led[led->id].cdev);
> + cancel_work_sync(&led[led->id].work);
This looks wrong. I guess it should be "&led[i]..."
> + }
> +
> + kfree(led);
> +
> + return 0;
> +}
> +
> +static struct platform_driver pmic8058_led_driver = {
> + .probe = pmic8058_led_probe,
> + .remove = __devexit_p(pmic8058_led_remove),
> + .driver = {
> + .name = "pm8058-led",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init pmic8058_led_init(void)
> +{
> + return platform_driver_register(&pmic8058_led_driver);
> +}
> +module_init(pmic8058_led_init);
> +
> +static void __exit pmic8058_led_exit(void)
> +{
> + platform_driver_unregister(&pmic8058_led_driver);
> +}
> +module_exit(pmic8058_led_exit);
> +
> +MODULE_DESCRIPTION("PMIC8058 LEDs driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_VERSION("1.0");
> +MODULE_ALIAS("platform:pmic8058-led");
> +MODULE_AUTHOR("Trilok Soni <tsoni@...eaurora.org>");
> diff --git a/include/linux/leds-pmic8058.h b/include/linux/leds-pmic8058.h
> new file mode 100644
> index 0000000..42a3ae7
> --- /dev/null
> +++ b/include/linux/leds-pmic8058.h
> @@ -0,0 +1,61 @@
> +/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
> + * 02110-1301, USA.
> + */
> +
> +#ifndef __LEDS_PMIC8058_H__
> +#define __LEDS_PMIC8058_H__
> +
> +/**
> + * enum pmic8058_leds - PMIC8058 supported led ids
> + * @PMIC8058_ID_LED_KB_LIGHT - keyboard backlight led
> + * @PMIC8058_ID_LED_0 - First low current led
> + * @PMIC8058_ID_LED_1 - Second low current led
> + * @PMIC8058_ID_LED_2 - Third low current led
> + * @PMIC8058_ID_FLASH_LED_0 - First flash led
> + * @PMIC8058_ID_FLASH_LED_0 - Second flash led
> + */
> +enum pmic8058_leds {
> + PMIC8058_ID_LED_KB_LIGHT = 1,
> + PMIC8058_ID_LED_0,
> + PMIC8058_ID_LED_1,
> + PMIC8058_ID_LED_2,
> + PMIC8058_ID_FLASH_LED_0,
> + PMIC8058_ID_FLASH_LED_1,
> +};
> +
> +/**
> + * struct pmic8058_led - per led data
> + * @name - name of the led
> + * @default_trigger - default trigger which needs to e attached
> + * @id - supported led id
> + */
> +struct pmic8058_led {
> + const char *name;
> + const char *default_trigger;
> + enum pmic8058_leds id;
> +};
> +
> +/**
> + * struct pmic8058_leds_platform_data - platform data for leds
> + * @num_leds - number of leds
> + * @leds - array of struct pmic8058_led
> + */
> +struct pmic8058_leds_platform_data {
> + int num_leds;
> + struct pmic8058_led *leds;
> +};
> +
Wasn't it the idea to reuse led_info and led_platform_data?
> +#endif /* __LEDS_PMIC8058_H__ */
Otherwise it looks good to me.
- Lars
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists