[<prev] [next>] [day] [month] [year] [list]
Message-Id: <201102071147.29355.bzolnier@gmail.com>
Date: Mon, 7 Feb 2011 11:47:28 +0100
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To: linux-ide@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Subject: [PATCH 1/2] cmd640: housekeeping
* remove stale ChangeLog
* removed unused defines
* remove CMD640_PREFETCH_MASKS define
* removed dead STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT code
* remove legacy CMD640_DUMP_REGS debugging code
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
---
drivers/ide/cmd640.c | 120
---------------------------------------------------
1 file changed, 2 insertions(+), 118 deletions(-)
Index: b/drivers/ide/cmd640.c
===================================================================
--- a/drivers/ide/cmd640.c
+++ b/drivers/ide/cmd640.c
@@ -31,75 +31,13 @@
* steve@...org, ulrpeg@...comm.gun.de, ism@...dis.ed.ac.uk, mack@...y.com
* liug@...a.indstate.edu, and others.
*
- * Version 0.01 Initial version, hacked out of ide.c,
- * and #include'd rather than compiled separately.
- * This will get cleaned up in a subsequent release.
- *
- * Version 0.02 Fixes for vlb initialization code, enable prefetch
- * for versions 'B' and 'C' of chip by default,
- * some code cleanup.
- *
- * Version 0.03 Added reset of secondary interface,
- * and black list for devices which are not compatible
- * with prefetch mode. Separate function for setting
- * prefetch is added, possibly it will be called some
- * day from ioctl processing code.
- *
- * Version 0.04 Now configs/compiles separate from ide.c
- *
- * Version 0.05 Major rewrite of interface timing code.
- * Added new function cmd640_set_mode to set PIO mode
- * from ioctl call. New drives added to black list.
- *
- * Version 0.06 More code cleanup. Prefetch is enabled only for
- * detected hard drives, not included in prefetch
- * black list.
- *
- * Version 0.07 Changed to more conservative drive tuning policy.
- * Unknown drives, which report PIO < 4 are set to
- * (reported_PIO - 1) if it is supported, or to PIO0.
- * List of known drives extended by info provided by
- * CMD at their ftp site.
- *
- * Version 0.08 Added autotune/noautotune support.
- *
- * Version 0.09 Try to be smarter about 2nd port enabling.
- * Version 0.10 Be nice and don't reset 2nd port.
- * Version 0.11 Try to handle more weird situations.
- *
+ * ...
* Version 0.12 Lots of bug fixes from Laszlo Peter
- * irq unmasking disabled for reliability.
- * try to be even smarter about the second port.
- * tidy up source code formatting.
- * Version 0.13 permit irq unmasking again.
- * Version 0.90 massive code cleanup, some bugs fixed.
- * defaults all drives to PIO mode0, prefetch off.
- * autotune is OFF by default, with compile time flag.
- * prefetch can be turned OFF/ON using "hdparm -p8/-p9"
- * (requires hdparm-3.1 or newer)
- * Version 0.91 first release to linux-kernel list.
- * Version 0.92 move initial reg dump to separate callable function
- * change "readahead" to "prefetch" to avoid confusion
- * Version 0.95 respect original BIOS timings unless autotuning.
- * tons of code cleanup and rearrangement.
- * added CONFIG_BLK_DEV_CMD640_ENHANCED option
- * prevent use of unmask when prefetch is on
- * Version 0.96 prevent use of io_32bit when prefetch is off
- * Version 0.97 fix VLB secondary interface for sjd@...p.net
- * other minor tune-ups: 0.96 was very good.
- * Version 0.98 ignore PCI version when disabled by BIOS
- * Version 0.99 display setup/active/recovery clocks with PIO mode
- * Version 1.00 Mmm.. cannot depend on PCMD_ENA in all systems
- * Version 1.01 slow/fast devsel can be selected with "hdparm -p6/-p7"
- * ("fast" is necessary for 32bit I/O in some systems)
+ * ...
* Version 1.02 fix bug that resulted in slow "setup times"
* (patch courtesy of Zoltan Hidvegi)
*/
-#define CMD640_PREFETCH_MASKS 1
-
-/*#define CMD640_DUMP_REGS */
-
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/delay.h>
@@ -116,29 +54,10 @@ static int cmd640_vlb;
* CMD640 specific registers definition.
*/
-#define VID 0x00
-#define DID 0x02
-#define PCMD 0x04
-#define PCMD_ENA 0x01
-#define PSTTS 0x06
-#define REVID 0x08
-#define PROGIF 0x09
-#define SUBCL 0x0a
-#define BASCL 0x0b
-#define BaseA0 0x10
-#define BaseA1 0x14
-#define BaseA2 0x18
-#define BaseA3 0x1c
-#define INTLINE 0x3c
-#define INPINE 0x3d
-
#define CFR 0x50
#define CFR_DEVREV 0x03
#define CFR_IDE01INTR 0x04
-#define CFR_DEVID 0x18
#define CFR_AT_VESA_078h 0x20
-#define CFR_DSA1 0x40
-#define CFR_DSA0 0x80
#define CNTRL 0x51
#define CNTRL_DIS_RA0 0x40
@@ -273,12 +192,6 @@ static int __init match_pci_cmd640_devic
if (get_cmd640_reg(i) != ven_dev[i])
return 0;
}
-#ifdef STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT
- if ((get_cmd640_reg(PCMD) & PCMD_ENA) == 0) {
- printk("ide: cmd640 on PCI disabled by BIOS\n");
- return 0;
- }
-#endif /* STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT */
return 1; /* success */
}
@@ -356,32 +269,11 @@ static int __init secondary_port_respond
return 1; /* success */
}
-#ifdef CMD640_DUMP_REGS
-/*
- * Dump out all cmd640 registers. May be called from ide.c
- */
-static void cmd640_dump_regs(void)
-{
- unsigned int reg = cmd640_vlb ? 0x50 : 0x00;
-
- /* Dump current state of chip registers */
- printk("ide: cmd640 internal register dump:");
- for (; reg <= 0x59; reg++) {
- if (!(reg & 0x0f))
- printk("\n%04x:", reg);
- printk(" %02x", get_cmd640_reg(reg));
- }
- printk("\n");
-}
-#endif
-
static void __set_prefetch_mode(ide_drive_t *drive, int mode)
{
if (mode) { /* want prefetch on? */
-#if CMD640_PREFETCH_MASKS
drive->dev_flags |= IDE_DFLAG_NO_UNMASK;
drive->dev_flags &= ~IDE_DFLAG_UNMASK;
-#endif
drive->dev_flags &= ~IDE_DFLAG_NO_IO_32BIT;
} else {
drive->dev_flags &= ~IDE_DFLAG_NO_UNMASK;
@@ -745,10 +637,6 @@ static int __init cmd640x_init(void)
}
put_cmd640_reg(0x5b, 0);
-#ifdef CMD640_DUMP_REGS
- cmd640_dump_regs();
-#endif
-
/*
* Documented magic begins here
*/
@@ -830,10 +718,6 @@ static int __init cmd640x_init(void)
printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n",
second_port_cmd640 ? "" : "not ", port2);
-#ifdef CMD640_DUMP_REGS
- cmd640_dump_regs();
-#endif
-
return ide_host_add(&cmd640_port_info, hws, second_port_cmd640 ? 2 : 1,
NULL);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists