lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Tue, 8 Feb 2011 11:29:59 +0800
From:	Bhupesh SHARMA <bhupesh.sharma@...com>
To:	Tomoya MORINAGA <tomoya-linux@....okisemi.com>,
	'Wolfgang Grandegger' <wg@...ndegger.com>
Cc:	"socketcan-core@...ts.berlios.de" <socketcan-core@...ts.berlios.de>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: About bittiming calculation result

Hi Tomoya,

> -----Original Message-----
> From: socketcan-core-bounces@...ts.berlios.de [mailto:socketcan-core-
> bounces@...ts.berlios.de] On Behalf Of Tomoya MORINAGA
> Sent: Tuesday, February 08, 2011 6:40 AM
> To: 'Wolfgang Grandegger'
> Cc: socketcan-core@...ts.berlios.de; netdev@...r.kernel.org; linux-
> kernel@...r.kernel.org
> Subject: RE: About bittiming calculation result
> 
> On Monday, February 07, 2011 9:01 PM, Wolfgang Grandegger wrote
> >
> > Well, only prop_seg+phase_seg=tseg1 is relevant and the
> > pch_can driver sets the allowed minimum "tseg1_min1" currently to 1:
> >
> > static struct can_bittiming_const pch_can_bittiming_const = {
> >         .name = KBUILD_MODNAME,
> >         .tseg1_min = 1,
> >         .tseg1_max = 16,
> >         .tseg2_min = 1,
> >         .tseg2_max = 8,
> >         .sjw_max = 4,
> >         .brp_min = 1,
> >         .brp_max = 1024, /* 6bit + extended 4bit */
> >         .brp_inc = 1,
> > };
> >
> > > seg1/seg2/sjw/prop_seg must be more than 1 ?
> >
> > Then "tseg1_min" should be set to *2*.
> 
> Though some drivers accepted by upstream have parameter "tseg1_min" as
> 1,
> Sould we release the patch like below ?
>  -         .tseg1_min = 1,
> +         .tseg1_min = 2,
> 
AFAIK pch uses the Bosch C_CAN core internally.
As per Bosch C_CAN user manual tseg1= prop_seg + phase_seg1
So, ideally tseg1_min should be 2. My version of Bosch C_CAN driver
Uses the value 2.

Regards,
Bhupesh
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists