| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <39897.88.65.119.194.1297296401.squirrel@88.65.119.194>
Date: Thu, 10 Feb 2011 01:06:41 +0100 (CET)
From: "Yupeng Schneider" <yupeng.schneider@...s.fraunhofer.de>
To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
yupeng.schneider@...glemail.com
Subject: [PATCH]ARM: mmp: add Trizeps6 board support
Hi all,
the following patch add the BSP for the Trizeps6 board with pxa168 Processor.
Signed-off-by: Yupeng Schneider <yupeng.schneider@...glemail.com>
---
arch/arm/mach-mmp/Kconfig | 29 ++
arch/arm/mach-mmp/Makefile | 1 +
arch/arm/mach-mmp/include/mach/audio.h | 29 ++
arch/arm/mach-mmp/include/mach/pxa168.h | 21 +
arch/arm/mach-mmp/include/mach/regs-apmu.h | 1 +
arch/arm/mach-mmp/include/mach/trizeps6.h | 122 ++++++
arch/arm/mach-mmp/include/mach/trizeps6_cpld.h | 87 +++++
arch/arm/mach-mmp/pxa168.c | 10 +
arch/arm/mach-mmp/trizeps6.c | 469
++++++++++++++++++++++++
arch/arm/mach-mmp/trizeps6_cpld.c | 145 ++++++++
10 files changed, 914 insertions(+), 0 deletions(-)
create mode 100755 arch/arm/mach-mmp/include/mach/audio.h
create mode 100755 arch/arm/mach-mmp/include/mach/trizeps6.h
create mode 100755 arch/arm/mach-mmp/include/mach/trizeps6_cpld.h create
mode 100755 arch/arm/mach-mmp/trizeps6.c
create mode 100755 arch/arm/mach-mmp/trizeps6_cpld.c
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index
0711d3b..8c6be81 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -64,6 +64,35 @@ config MACH_TETON_BGA
Say 'Y' here if you want to support the Marvell PXA168-based
Teton BGA Development Board.
+comment "Third Party Dev Platforms (sorted by vendor name)"
+
+config MACH_TRIZEPS6
+ bool "Keith und Koep Trizeps6 DIMM-Module"
+ select TRIZEPS6_PCMCIA
+ select CPU_PXA168
+ help
+ Say 'Y' here if you want to support TRIZEPS VI board Development Board.
+
+choice
+ prompt "Select base board for Trizeps module"
+ depends on MACH_TRIZEPS6
+
+config MACH_TRIZEPS6_CONXS
+ bool "ConXS Eval Board"
+
+config MACH_TRIZEPS6_UCONXS
+ bool "uConXS Eval Board"
+
+config MACH_TRIZEPS6_ANY
+ bool "another Board"
+
+endchoice
+
+config TRIZEPS6_PCMCIA
+ bool
+ help
+ Enable PCMCIA support for Trizeps modules
+
endmenu
config CPU_PXA168
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index
751cdbf..1b8744f 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -18,3 +18,4 @@ obj-$(CONFIG_MACH_TTC_DKB) += ttc_dkb.o
obj-$(CONFIG_MACH_FLINT) += flint.o
obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o
+obj-$(CONFIG_MACH_TRIZEPS6) += trizeps6.o trizeps6_cpld.o
diff --git a/arch/arm/mach-mmp/include/mach/audio.h
b/arch/arm/mach-mmp/include/mach/audio.h
index 0000000..6ef474f
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/audio.h
@@ -0,0 +1,29 @@
+#ifndef __ASM_ARCH_AUDIO_H__
+#define __ASM_ARCH_AUDIO_H__
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/ac97_codec.h>
+
+/*
+ * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
+ * a -1 value means no gpio will be used for reset
+ * @codec_pdata: AC97 codec platform_data
+
+ * reset_gpio should only be specified for pxa27x CPUs where a silicon +
* bug prevents correct operation of the reset line. If not specified, + *
the default behaviour on these CPUs is to consider gpio 113 as the + *
AC97 reset line, which is the default on most boards.
+ */
+struct pxa2xx_audio_ops_t {
+ int (*startup)(struct snd_pcm_substream *, void *);
+ void (*shutdown)(struct snd_pcm_substream *, void *);
+ void (*suspend)(void *);
+ void (*resume)(void *);
+ void *priv;
+ int reset_gpio;
+ void *codec_pdata[AC97_BUS_MAX_DEVICES];
+};
+
+
+#endif
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h
b/arch/arm/mach-mmp/include/mach/pxa168.h
index 1801e42..c4a9977 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -14,9 +14,12 @@ extern void pxa168_clear_keypad_wakeup(void);
#include <video/pxa168fb.h>
#include <plat/pxa27x_keypad.h>
#include <mach/cputype.h>
+#include <linux/pxa168_eth.h>
+#include <mach/audio.h>
extern struct pxa_device_desc pxa168_device_uart1;
extern struct pxa_device_desc pxa168_device_uart2;
+extern struct pxa_device_desc pxa168_device_uart3;
extern struct pxa_device_desc pxa168_device_twsi0;
extern struct pxa_device_desc pxa168_device_twsi1;
extern struct pxa_device_desc pxa168_device_pwm1;
@@ -31,6 +34,9 @@ extern struct pxa_device_desc pxa168_device_ssp5;
extern struct pxa_device_desc pxa168_device_nand;
extern struct pxa_device_desc pxa168_device_fb;
extern struct pxa_device_desc pxa168_device_keypad;
+extern struct pxa_device_desc pxa168_device_mfu;
+extern struct pxa_device_desc pxa168_device_ac97;
+
static inline int pxa168_add_uart(int id)
{
@@ -39,6 +45,7 @@ static inline int pxa168_add_uart(int id)
switch (id) {
case 1: d = &pxa168_device_uart1; break;
case 2: d = &pxa168_device_uart2; break;
+ case 3: d = &pxa168_device_uart3; break;
}
if (d == NULL)
@@ -117,4 +124,18 @@ static inline int pxa168_add_keypad(struct
pxa27x_keypad_platform_data *data)
return pxa_register_device(&pxa168_device_keypad, data, sizeof(*data));
}
+static inline int pxa168_add_mfu(struct pxa168_eth_platform_data *data) +{
+#if defined(CONFIG_PXA168_ETH)
+ return pxa_register_device(&pxa168_device_mfu, data, sizeof(*data)); +#else
+ return 0;
+#endif
+}
+
+static inline int pxa168_add_ac97(struct pxa2xx_audio_ops_t *ops) +{
+ return pxa_register_device(&pxa168_device_ac97, ops , sizeof(*ops)); +}
+
#endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h
b/arch/arm/mach-mmp/include/mach/regs-apmu.h
index ac47023..68d39bc 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apmu.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h
@@ -27,6 +27,7 @@
#define APMU_DMA APMU_REG(0x064)
#define APMU_GEU APMU_REG(0x068)
#define APMU_BUS APMU_REG(0x06c)
+#define APMU_MFU APMU_REG(0x0fc)
#define APMU_FNCLK_EN (1 << 4)
#define APMU_AXICLK_EN (1 << 3)
diff --git a/arch/arm/mach-mmp/include/mach/trizeps6.h
b/arch/arm/mach-mmp/include/mach/trizeps6.h
index 0000000..40b526a
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/trizeps6.h
@@ -0,0 +1,122 @@
+/************************************************************************
+ * Include file for TRIZEPS6 SoM and ConXS eval-board
+ * Copyright (c) Yupeng Schneider
+ * 2010
+
************************************************************************/ +
+/*
+ * Includes/Defines
+ */
+#ifndef _TRIPEPS6_H_
+#define _TRIPEPS6_H_
+
+#define STUART_SODIMM 1
+
+/* UART */
+#define GPIO104_UART1_DSR MFP_CFG(GPIO104, AF2)
+#define GPIO105_UART1_DCD MFP_CFG(GPIO105, AF2)
+#define GPIO107_UART2_TXD MFP_CFG_DRV(GPIO126, AF2, FAST)
+#define GPIO107_UART2_RXD MFP_CFG_DRV(GPIO36, AF2, FAST)
+#define GPIO109_UART2_CTS MFP_CFG(GPIO123, AF2)
+#define GPIO109_UART2_RTS MFP_CFG(GPIO124, AF2)
+#define GPIO30_UART3_TXD MFP_CFG_DRV(GPIO30, AF2, FAST)
+#define GPIO31_UART3_RXD MFP_CFG_DRV(GPIO31, AF2, FAST)
+#define GPIO32_UART3_CTS MFP_CFG(GPIO32, AF2)
+#define GPIO33_UART3_RTS MFP_CFG(GPIO33, AF2)
+
+/* MMC2 */
+#define GPIO122_MMC2_DAT3 MFP_CFG_DRV(GPIO122, AF4, FAST)
+#define GPIO121_MMC2_DAT2 MFP_CFG_DRV(GPIO121, AF4, FAST)
+#define GPIO120_MMC2_DAT1 MFP_CFG_DRV(GPIO120, AF4, FAST)
+#define GPIO119_MMC2_DAT0 MFP_CFG_DRV(GPIO119, AF4, FAST)
+#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST)
+#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST)
+#define GPIO53_MMC2_CD MFP_CFG(GPIO53, AF0)
+
+/*MMC4*/
+#define GPIO78_MMC4_DAT3 MFP_CFG_DRV(GPIO78, AF5, FAST)
+#define GPIO79_MMC4_DAT2 MFP_CFG_DRV(GPIO79, AF5, FAST)
+#define GPIO80_MMC4_DAT1 MFP_CFG_DRV(GPIO80, AF5, FAST)
+#define GPIO81_MMC4_DAT0 MFP_CFG_DRV(GPIO81, AF5, FAST)
+#define GPIO82_MMC4_CMD MFP_CFG_DRV(GPIO82, AF5, FAST)
+#define GPIO83_MMC4_CLK MFP_CFG_DRV(GPIO83, AF5, FAST)
+
+/* I2C */
+#define GPIO102_CI2C_SDA MFP_CFG(GPIO102, AF1)
+
+/* MFU */
+#define GPIO86_TX_CLK MFP_CFG(GPIO86, AF5)
+#define GPIO87_TX_EN MFP_CFG(GPIO87, AF5)
+#define GPIO88_TX_DQ3 MFP_CFG(GPIO88, AF5)
+#define GPIO89_TX_DQ2 MFP_CFG(GPIO89, AF5)
+#define GPIO90_TX_DQ1 MFP_CFG(GPIO90, AF5)
+#define GPIO91_TX_DQ0 MFP_CFG(GPIO91, AF5)
+#define GPIO92_MII_CRS MFP_CFG(GPIO92, AF5)
+#define GPIO93_MII_COL MFP_CFG(GPIO93, AF5)
+#define GPIO94_RX_CLK MFP_CFG(GPIO94, AF5)
+#define GPIO95_RX_ER MFP_CFG(GPIO95, AF5)
+#define GPIO96_RX_DQ3 MFP_CFG(GPIO96, AF5)
+#define GPIO97_RX_DQ2 MFP_CFG(GPIO97, AF5)
+#define GPIO98_RX_DQ1 MFP_CFG(GPIO98, AF5)
+#define GPIO99_RX_DQ0 MFP_CFG(GPIO99, AF5)
+#define GPIO100_MII_MDC MFP_CFG(GPIO100, AF5)
+#define GPIO101_MII_MDIO MFP_CFG(GPIO101, AF5)
+#define GPIO103_RX_DV MFP_CFG(GPIO103, AF5)
+
+/* AC97 */
+#define GPIO115_AC97_BITCLK MFP_CFG(GPIO115, AF6)
+#define GPIO114_AC97_SDATA_IN_0 MFP_CFG(GPIO114, AF6)
+#define GPIO116_AC97_SDATA_IN_1 MFP_CFG(GPIO116, AF6)
+#define GPIO117_AC97_SDATA_OUT MFP_CFG(GPIO117, AF6)
+#define GPIO118_AC97_SYNC MFP_CFG(GPIO118, AF6)
+
+
+
+#define TRIZEPS6_PHYS_BASE 0xd4000000
+
+
+#define TRIZEPS6_PIC_PHYS (0x88000000) /* CS0-3 Logic chip on ConXS */
+ /* Logic on ConXS-board CSFR register*/
+#define TRIZEPS6_CFSR_PHYS (TRIZEPS6_PIC_PHYS)
+ /* Logic on ConXS-board BOCR register*/
+#define TRIZEPS6_BOCR_PHYS (TRIZEPS6_PIC_PHYS+0x00200000)
+ /* Logic on ConXS-board IRCR register*/
+#define TRIZEPS6_IRCR_PHYS (TRIZEPS6_PIC_PHYS+0x00300000)
+ /* Logic on ConXS-board UPSR register*/
+#define TRIZEPS6_UPSR_PHYS (TRIZEPS6_PIC_PHYS+0x00280000)
+ /* Logic on ConXS-board DICR register*/
+#define TRIZEPS6_DICR_PHYS (TRIZEPS6_PIC_PHYS+0x00380000)
+
+
+#define TRIZEPS6_CPLD_PHYS (0x8e000000) /* CPLD on Trizeps6 module */ +
+#define TRIZEPS6_CPLD_CTRL_PHYS (TRIZEPS6_CPLD_PHYS)
+#define TRIZEPS6_CPLD_FTUR_PHYS (TRIZEPS6_CPLD_PHYS+0x4)
+#define TRIZEPS6_CPLD_HIBE_PHYS (TRIZEPS6_CPLD_PHYS+0x8)
+#define TRIZEPS6_CPLD_PWM_PHYS (TRIZEPS6_CPLD_PHYS+0xc)
+#define TRIZEPS6_CPLD_PLDR_PHYS (TRIZEPS6_CPLD_PHYS+0x10)
+#define TRIZEPS6_CPLD_PSET_PHYS (TRIZEPS6_CPLD_PHYS+0x14)
+#define TRIZEPS6_CPLD_TTLO_PHYS (TRIZEPS6_CPLD_PHYS+0x18)
+
+
+/* MMC socket */
+#define GPIO_MMC2_DET 53
+#define TRIZEPS6_MMC2_IRQ IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO53))
+#define GPIO_MMC4_DET 41
+#define TRIZEPS6_MMC4_IRQ IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO41)
+
+/* Off-module PIC on ConXS board */
+#define GPIO_PIC 51
+#define TRIZEPS6_PIC_IRQ IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO51)
+
+/* PCMCIA socket Compact Flash */
+#define GPIO_PCD 43 /* PCMCIA Card Detect */
+#define TRIZEPS6_CD_IRQ IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO43)
+#define GPIO_PRDY 113 /* READY / nINT */
+#define TRIZEPS6_READY_NINT IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO113) +
+#define trizeps6_GPIO_CODEC_IRQ 116
+
+extern void trizeps6_ac97_acreset(int i);
+
+#endif /* _TRIPEPS6_H_ */
diff --git a/arch/arm/mach-mmp/include/mach/trizeps6_cpld.h
b/arch/arm/mach-mmp/include/mach/trizeps6_cpld.h
index 0000000..8538a6b
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/trizeps6_cpld.h
@@ -0,0 +1,87 @@
+#ifndef _TRIPEPS6_CPLD_H_
+#define _TRIPEPS6_CPLD_H_
+
+/* index of resource */
+#define CTRL_S 0
+#define CTRL_R 1
+#define FTUR_S 2
+#define FTUR_R 3
+#define HIBE_S 4
+#define HIBE_R 5
+#define PWM 6
+#define PLDR_S 7
+#define PLDR_R 8
+#define PSET_S 9
+#define PSET_R 10
+#define TTLO_S 11
+#define TTLO_R 12
+
+#define CPLD_CTRL_S cpld.addr[CTRL_S].val
+#define CPLD_CTRL_R cpld.addr[CTRL_R].val
+#define CPLD_CONTROL_GR (1 << 0)
+#define CPLD_CONTROL_CODEC (1 << 2)
+#define CPLD_CONTROL_ETHPHY (1 << 3)
+#define CPLD_CONTROL_RWL (1 << 4)
+#define CPLD_CONTROL_RBT (1 << 5)
+
+#define CPLD_FTUR_S cpld.addr[FTUR_S].val
+#define CPLD_FTUR_R cpld.addr[FTUR_R].val
+#define CPLD_FEATURE_UART3_SODIMM (1 << 0)
+#define CPLD_FEATURE_UART3_BT (1 << 1)
+#define CPLD_FEATURE_CF_MODE (1 << 2)
+#define CPLD_FEATURE_TTLIO (1 << 3)
+#define CPLD_PWM_SODIMM_P69 (1 << 4)
+#define CPLD_PWM_SODIMM_P77 (1 << 5)
+#define CPLD_PWM_SODIMM_P106 (1 << 6)
+#define CPLD_BT_PWM_SODIMM (1 << 7)
+
+#define CPLD_HIBE_S cpld.addr[HIBE_S].val
+#define CPLD_HIBE_R cpld.addr[HIBE_R].val
+#define CPLD_HIBERNATE_MODE (1 << 0)
+#define CPLD_HIBERNATE_WAKE_TOUCH (1 << 1)
+#define CPLD_HIBERNATE_WAKE_PMIC (1 << 2)
+#define CPLD_HIBERNATE_WAKE_IRQ_P43 (1 << 3)
+
+#define CPLD_PWM cpld.addr[PWM].val
+
+#define CPLD_PINLDR cpld.addr[PINLDR].val
+#define CPLD_PINLDR_P69 (1 << 0)
+#define CPLD_PINLDR_P100_PSKTSEL (1 << 1)
+#define CPLD_PINLDR_P98_CFNREG (1 << 2)
+#define CPLD_PINLDR_P104_CFNIOIS16 (1 << 3)
+#define CPLD_PINLDR_P93_RDNWR (1 << 4)
+#define CPLD_PINLDR_P104_IRQ_P43 (1 << 5)
+
+#define CPLD_PSET_S cpld.addr[PSET_S].val
+#define CPLD_PSET_R cpld.addr[PSET_R].val
+#define CPLD_PINSET_P69 (1 << 0)
+#define CPLD_PINSET_P100_PSKTSEL (1 << 1)
+#define CPLD_PINSET_P98_CFNREG (1 << 2)
+#define CPLD_PINSET_P104_CFNIOIS16 (1 << 3)
+#define CPLD_PINSET_P93_RDnWR (1 << 4)
+
+#define CPLD_TTLO_S cpld.addr[TTLO_S].val
+#define CPLD_TTLO_R cpld.addr[TTLO_R].val
+#define CPLD_TTLIO_W_A8 (1 << 0)
+#define CPLD_TTLIO_W_A9 (1 << 1)
+#define CPLD_TTLIO_W_A10 (1 << 2)
+#define CPLD_TTLIO_W_A11 (1 << 3)
+#define CPLD_TTLIO_W_A12 (1 << 4)
+#define CPLD_TTLIO_W_A13 (1 << 5)
+#define CPLD_TTLIO_W_A14 (1 << 6)
+#define CPLD_TTLIO_W_A15 (1 << 7)
+#define CPLD_TTLIO_r_A0 (1 << 0)
+#define CPLD_TTLIO_r_A1 (1 << 1)
+#define CPLD_TTLIO_r_A2 (1 << 2)
+#define CPLD_TTLIO_r_A3 (1 << 3)
+#define CPLD_TTLIO_r_A4 (1 << 4)
+#define CPLD_TTLIO_r_A5 (1 << 5)
+#define CPLD_TTLIO_r_A6 (1 << 6)
+#define CPLD_TTLIO_r_A7 (1 << 7)
+
+
+
+extern unsigned short trizeps6_cpld_readw(unsigned int reg);
+extern inline void trizeps6_cpld_writew(unsigned int reg, unsigned short
value);
+
+#endif /* _TRIPEPS6_CPLD_H_ */
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index
72b4e76..9c2396e 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -66,6 +66,7 @@ void __init pxa168_init_irq(void)
/* APB peripheral clocks */
static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
+static APBC_CLK(uart3, PXA168_UART3, 1, 14745600);
static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
@@ -78,14 +79,18 @@ static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
+static APBC_CLK(ac97, PXA168_AC97, 0, 24576000);
+
static APMU_CLK(nand, NAND, 0x01db, 208000000);
static APMU_CLK(lcd, LCD, 0x7f, 312000000);
+static APMU_CLK(mfu, MFU, 0x9, 0);
/* device and clock bindings */
static struct clk_lookup pxa168_clkregs[] = {
INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+ INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
@@ -100,6 +105,8 @@ static struct clk_lookup pxa168_clkregs[] = {
INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
+ INIT_CLKREG(&clk_mfu, "pxa168-eth", "MFUCLK"),
+ INIT_CLKREG(&clk_ac97, "pxa2xx-ac97", "AC97CLK"),
};
static int __init pxa168_init(void)
@@ -149,6 +156,7 @@ void pxa168_clear_keypad_wakeup(void)
/* on-chip devices */
PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
+PXA168_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4026000, 0x30, 23, 24);
PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
@@ -163,3 +171,5 @@ PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000,
0x40, 58, 59);
PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
+PXA168_DEVICE(mfu, "pxa168-eth", -1, MFU, 0xc0800000, 0x0FFF);
+PXA168_DEVICE(ac97, "pxa2xx-ac97", -1, AC97, 0xd402B000, 0x0fff); diff
--git a/arch/arm/mach-mmp/trizeps6.c b/arch/arm/mach-mmp/trizeps6.c index
0000000..a935f14
--- /dev/null
+++ b/arch/arm/mach-mmp/trizeps6.c
@@ -0,0 +1,469 @@
+/*
+ * linux/arch/arm/mach-mmp/trizeps6.c
+ *
+ * Support for the Keith und Koep Trizeps6 Modul Platform
+ * based on Marvell PXA168-CPU
+ *
+ * Author: Yupeng Schneider
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as + *
publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/delay.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa168.h>
+#include <mach/pxa168.h>
+#include <mach/gpio.h>
+#include <linux/pxa168_eth.h>
+#include <mach/irqs.h>
+#include <mach/trizeps6.h>
+#include <mach/trizeps6_cpld.h>
+#include "common.h"
+#include <linux/mmc/sdhci.h>
+#include <linux/ucb1400.h>
+#include <mach/audio.h>
+
+
+static unsigned long trizeps6_pin_config[] __initdata = {
+ /* Data Flash Interface */
+ GPIO0_DFI_D15,
+ GPIO1_DFI_D14,
+ GPIO2_DFI_D13,
+ GPIO3_DFI_D12,
+ GPIO4_DFI_D11,
+ GPIO5_DFI_D10,
+ GPIO6_DFI_D9,
+ GPIO7_DFI_D8,
+ GPIO8_DFI_D7,
+ GPIO9_DFI_D6,
+ GPIO10_DFI_D5,
+ GPIO11_DFI_D4,
+ GPIO12_DFI_D3,
+ GPIO13_DFI_D2,
+ GPIO14_DFI_D1,
+ GPIO15_DFI_D0,
+
+ /* Static Memory Controller */
+ GPIO18_SMC_nCS0,
+ GPIO34_SMC_nCS1,
+ GPIO23_SMC_nLUA,
+ GPIO25_SMC_nLLA,
+ GPIO28_SMC_RDY,
+ GPIO29_SMC_SCLK,
+ GPIO35_SMC_BE1,
+ GPIO36_SMC_BE2,
+
+
+ /* UART1 */
+ GPIO107_UART1_RXD,
+ GPIO108_UART1_TXD,
+ GPIO107_UART1_RXD,
+ GPIO108_UART1_TXD,
+ GPIO109_UART1_RTS,
+ GPIO110_UART1_CTS,
+ GPIO111_UART1_RI,
+ GPIO104_UART1_DSR,
+ GPIO112_UART1_DTR,
+ GPIO105_UART1_DCD,
+
+ /* UART2 */
+ GPIO107_UART2_TXD,
+ GPIO107_UART2_RXD,
+ GPIO109_UART2_CTS,
+ GPIO109_UART2_RTS,
+
+ /* UART3 */
+ GPIO30_UART3_TXD,
+ GPIO31_UART3_RXD,
+ GPIO32_UART3_CTS,
+ GPIO33_UART3_RTS,
+
+
+ /* MFU */
+ GPIO86_TX_CLK,
+ GPIO87_TX_EN,
+ GPIO88_TX_DQ3,
+ GPIO89_TX_DQ2,
+ GPIO90_TX_DQ1,
+ GPIO91_TX_DQ0,
+ GPIO92_MII_CRS,
+ GPIO93_MII_COL,
+ GPIO94_RX_CLK,
+ GPIO95_RX_ER,
+ GPIO96_RX_DQ3,
+ GPIO97_RX_DQ2,
+ GPIO98_RX_DQ1,
+ GPIO99_RX_DQ0,
+ GPIO100_MII_MDC,
+ GPIO101_MII_MDIO,
+ GPIO103_RX_DV,
+
+ /* USB OTG */
+ GPIO85_GPIO,
+ GPIO47_GPIO,
+
+ /* i2c bus */
+ GPIO102_CI2C_SDA,
+ GPIO106_CI2C_SCL,
+
+
+ /* MMC2 */
+ GPIO122_MMC2_DAT3 | MFP_PULL_HIGH,
+ GPIO121_MMC2_DAT2 | MFP_PULL_HIGH,
+ GPIO120_MMC2_DAT1 | MFP_PULL_HIGH,
+ GPIO119_MMC2_DAT0 | MFP_PULL_HIGH,
+ GPIO28_MMC2_CMD | MFP_PULL_HIGH,
+ GPIO29_MMC2_CLK,
+ GPIO53_MMC2_CD | MFP_PULL_LOW, /* TRIZEPS6_MMC2_IRQ */
+
+ /* MMC4 */
+ GPIO78_MMC4_DAT3 | MFP_PULL_HIGH,
+ GPIO79_MMC4_DAT2 | MFP_PULL_HIGH,
+ GPIO80_MMC4_DAT1 | MFP_PULL_HIGH,
+ GPIO81_MMC4_DAT0 | MFP_PULL_HIGH,
+ GPIO82_MMC4_CMD | MFP_PULL_HIGH,
+ GPIO83_MMC4_CLK,
+
+ /* LCD */
+ GPIO56_LCD_FCLK_RD,
+ GPIO57_LCD_LCLK_A0,
+ GPIO58_LCD_PCLK_WR,
+ GPIO59_LCD_DENA_BIAS,
+ GPIO60_LCD_DD0,
+ GPIO61_LCD_DD1,
+ GPIO62_LCD_DD2,
+ GPIO63_LCD_DD3,
+ GPIO64_LCD_DD4,
+ GPIO65_LCD_DD5,
+ GPIO66_LCD_DD6,
+ GPIO67_LCD_DD7,
+ GPIO68_LCD_DD8,
+ GPIO69_LCD_DD9,
+ GPIO70_LCD_DD10,
+ GPIO71_LCD_DD11,
+ GPIO72_LCD_DD12,
+ GPIO73_LCD_DD13,
+ GPIO74_LCD_DD14,
+ GPIO75_LCD_DD15,
+
+
+ /* AC97 */
+ GPIO115_AC97_BITCLK,
+ GPIO114_AC97_SDATA_IN_0,
+ GPIO117_AC97_SDATA_OUT,
+ GPIO118_AC97_SYNC,
+ GPIO116_GPIO,
+
+
+ GPIO51_GPIO, /* TRIZEPS6_PIC_IRQ */
+ GPIO27_GPIO, /* Ethernet IRQ */
+};
+
+
+
+/****************************************************************************
+ * CPLD
+
****************************************************************************/
+
+static struct resource tri6_cpld_resources[] = {
+ [CTRL_S] = {
+ .start = TRIZEPS6_CPLD_CTRL_PHYS,
+ .end = TRIZEPS6_CPLD_CTRL_PHYS+1,
+ .flags = IORESOURCE_MEM,
+ },
+ [CTRL_R] = {
+ .start = TRIZEPS6_CPLD_CTRL_PHYS+2,
+ .end = TRIZEPS6_CPLD_CTRL_PHYS+3,
+ .flags = IORESOURCE_MEM,
+ },
+ [FTUR_S] = {
+ .start = TRIZEPS6_CPLD_FTUR_PHYS,
+ .end = TRIZEPS6_CPLD_FTUR_PHYS+1,
+ .flags = IORESOURCE_MEM,
+ },
+ [FTUR_R] = {
+ .start = TRIZEPS6_CPLD_FTUR_PHYS+2,
+ .end = TRIZEPS6_CPLD_FTUR_PHYS+3,
+ .flags = IORESOURCE_MEM,
+ },
+ [HIBE_S] = {
+ .start = TRIZEPS6_CPLD_HIBE_PHYS,
+ .end = TRIZEPS6_CPLD_HIBE_PHYS+1,
+ .flags = IORESOURCE_MEM,
+ },
+ [HIBE_R] = {
+ .start = TRIZEPS6_CPLD_HIBE_PHYS+2,
+ .end = TRIZEPS6_CPLD_HIBE_PHYS+3,
+ .flags = IORESOURCE_MEM,
+ },
+ [PWM] = {
+ .start = TRIZEPS6_CPLD_PWM_PHYS,
+ .end = TRIZEPS6_CPLD_PWM_PHYS+1,
+ .flags = IORESOURCE_MEM,
+ },
+ [PLDR_S] = {
+ .start = TRIZEPS6_CPLD_PLDR_PHYS,
+ .end = TRIZEPS6_CPLD_PLDR_PHYS+1,
+ .flags = IORESOURCE_MEM,
+ },
+ [PLDR_R] = {
+ .start = TRIZEPS6_CPLD_PLDR_PHYS+2,
+ .end = TRIZEPS6_CPLD_PLDR_PHYS+3,
+ .flags = IORESOURCE_MEM,
+ },
+ [PSET_S] = {
+ .start = TRIZEPS6_CPLD_PSET_PHYS,
+ .end = TRIZEPS6_CPLD_PSET_PHYS+1,
+ .flags = IORESOURCE_MEM,
+ },
+ [PSET_R] = {
+ .start = TRIZEPS6_CPLD_PSET_PHYS+2,
+ .end = TRIZEPS6_CPLD_PSET_PHYS+3,
+ .flags = IORESOURCE_MEM,
+ },
+ [TTLO_S] = {
+ .start = TRIZEPS6_CPLD_TTLO_PHYS,
+ .end = TRIZEPS6_CPLD_TTLO_PHYS+1,
+ .flags = IORESOURCE_MEM,
+ },
+ [TTLO_R] = {
+ .start = TRIZEPS6_CPLD_TTLO_PHYS+2,
+ .end = TRIZEPS6_CPLD_TTLO_PHYS+3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static int tri6_cpld_platdata = 1;
+
+static struct platform_device cpld_device = {
+ .name = "trizeps6-cpld",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(tri6_cpld_resources),
+ .resource = tri6_cpld_resources,
+ .dev = {
+ .platform_data = &tri6_cpld_platdata,
+ }
+};
+
+
+/******************************************************************************
+ * Audio and Touchscreen
+
******************************************************************************/
+
+static struct ucb1400_pdata trizeps6_ucb1400_pdata = {
+ .irq = gpio_to_irq(trizeps6_GPIO_CODEC_IRQ),
+};
+
+static struct pxa2xx_audio_ops_t trizeps6_ac97_pdata = {
+ .codec_pdata = { &trizeps6_ucb1400_pdata, },
+};
+
+static struct platform_device trizeps6_ucb1400_device = {
+ .name = "ucb1400_core",
+ .id = -1,
+ .dev = {
+ .platform_data = &trizeps6_ucb1400_pdata,
+ },
+};
+
+static void __init trizeps6_ts_init(void)
+{
+ pxa168_add_ac97(&trizeps6_ac97_pdata);
+ platform_device_register(&trizeps6_ucb1400_device);
+}
+
+void trizeps6_ac97_acreset(int i)
+{ unsigned short value;
+
+ if (i == 1) {
+
+ value = trizeps6_cpld_readw(CTRL_S);
+ trizeps6_cpld_writew(CTRL_S, value | CPLD_CONTROL_CODEC);
+ }
+ if (!i) {
+ value = trizeps6_cpld_readw(CTRL_R);
+ trizeps6_cpld_writew(CTRL_R, value | CPLD_CONTROL_CODEC);
+ }
+}
+
+/******************************************************************************
+ * Ethernet
+
******************************************************************************/
+static int trizeps6_eth_init(void)
+{
+ unsigned short value;
+
+ value = trizeps6_cpld_readw(CTRL_R);
+ trizeps6_cpld_writew(CTRL_R, value | CPLD_CONTROL_ETHPHY);
+ return 0;
+
+}
+
+static struct pxa168_eth_platform_data trizeps6_eth_data = {
+ .phy_addr = 0x1f,
+ .port_number = 0,
+ .init = trizeps6_eth_init,
+};
+
+/******************************************************************************
+ * NAND
+
******************************************************************************/
+static struct pxa3xx_nand_timing stnand02gw3b2d_timing = {
+ .tCH = 10,
+ .tCS = 40,
+ .tWH = 20,
+ .tWP = 24,
+ .tRH = 20,
+ .tRP = 24,
+ .tR = 50000,
+ .tWHR = 120,
+ .tAR = 20,
+
+};
+
+static struct pxa3xx_nand_cmdset largepage_cmdset = {
+ .read1 = 0x3000,
+ .read2 = 0x0050,
+ .program = 0x1080,
+ .read_status = 0x0070,
+ .read_id = 0x0090,
+ .erase = 0xD060,
+ .reset = 0x00FF,
+ .lock = 0x002A,
+ .unlock = 0x2423,
+ .lock_status = 0x007A,
+};
+
+static struct pxa3xx_nand_flash trizeps6_flashes[] = {
+ {
+ .timing = &stnand02gw3b2d_timing,
+ .cmdset = &largepage_cmdset,
+ .page_per_block = 64,
+ .page_size = 2048,
+ .flash_width = 8,
+ .dfc_width = 8,
+ .num_blocks = 2048,
+ .chip_id = 0xda20,
+ },
+};
+
+
+static struct mtd_partition trizeps6_nand_partitions[] = {
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_16M,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "reserved",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = (2*SZ_2M + SZ_1M),
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = (SZ_256M - 3*SZ_8M),
+ .mask_flags = 0,
+ }
+};
+
+static struct pxa3xx_nand_platform_data trizeps6_nand_info = {
+ .enable_arbiter = 1,
+ .parts = trizeps6_nand_partitions,
+ .nr_parts = ARRAY_SIZE(trizeps6_nand_partitions),
+ .flash = trizeps6_flashes,
+ .num_flash = ARRAY_SIZE(trizeps6_flashes),
+ .keep_config = 0
+};
+
+
+
+static struct i2c_board_info trizeps6_i2c_devices[] = {
+ { I2C_BOARD_INFO("pcf8593", 0x51), },
+};
+
+
+/******************************************************************************
+ * LCD
+
******************************************************************************/
+static struct fb_videomode trizeps6_video_modes[] = {
+ [0] = {
+ .pixclock = 39720,
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .hsync_len = 63,
+ .left_margin = 12,
+ .right_margin = 12,
+ .vsync_len = 4,
+ .upper_margin = 32,
+ .lower_margin = 10,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
+ },
+};
+
+static struct pxa168fb_mach_info trizeps6_lcd_info = {
+ .id = "Base-trizeps6",
+ .modes = trizeps6_video_modes,
+ .num_modes = ARRAY_SIZE(trizeps6_video_modes),
+ .pix_fmt = PIX_FMT_RGB565,
+ .io_pin_allocation_mode = PIN_MODE_DUMB_16_GPIO,
+ .dumb_mode = DUMB_MODE_RGB565,
+ .active = 1,
+ .panel_rbswap = 1,
+ .invert_pixclock = 0,
+};
+
+
+static struct platform_device *trizeps6_devices[] __initdata = {
+ &cpld_device,
+};
+
+static void __init trizeps6_init(void)
+{
+ mfp_config(ARRAY_AND_SIZE(trizeps6_pin_config));
+
+ pxa168_add_uart(1);
+ pxa168_add_uart(2);
+#ifdef STUART_SODIMM
+ pxa168_add_uart(3);
+#endif
+ pxa168_add_nand(&trizeps6_nand_info);
+ platform_add_devices(trizeps6_devices,
+ ARRAY_SIZE(trizeps6_devices));
+
+ pxa168_add_fb(&trizeps6_lcd_info);
+ pxa168_add_mfu(&trizeps6_eth_data);
+ pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(trizeps6_i2c_devices));
+ trizeps6_ts_init();
+}
+
+static void __init trizeps6_map_io(void)
+{
+ mmp_map_io();
+}
+
+MACHINE_START(TRIZEPS6, "PXA168-based Keith & Koep Trizeps VI Development
Module")
+ /* MAINTAINER("Yupeng Schneider" <yupeng.schneider@...glemail.com>) */
+ .map_io = trizeps6_map_io,
+ .init_irq = pxa168_init_irq,
+ .timer = &pxa168_timer,
+ .init_machine = trizeps6_init,
+MACHINE_END
+
+
diff --git a/arch/arm/mach-mmp/trizeps6_cpld.c
b/arch/arm/mach-mmp/trizeps6_cpld.c
index 0000000..2577b0f
--- /dev/null
+++ b/arch/arm/mach-mmp/trizeps6_cpld.c
@@ -0,0 +1,145 @@
+/*
+ * linux/arch/arm/mach-mmp/trizeps6_cpld.c
+ *
+ *
+ * Author: Yupeng Schneider
+ * Created: 27 10, 2010
+ * Copyright: Yupeng Schneider
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as + *
published by the Free Software Foundation.*/
+
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <mach/trizeps6.h>
+#include <mach/trizeps6_cpld.h>
+
+struct cpld_info {
+ struct region {
+ struct resource *res;
+ struct resource *req;
+ void __iomem *iom;
+ unsigned short val;
+ } addr[7];
+} cpld_info;
+
+static struct cpld_info cpld = { { { 0 } } };
+
+inline void trizeps6_cpld_writew(unsigned int reg, unsigned short value) +{
+ if ((cpld.addr[reg].iom != NULL))
+ writew(value, cpld.addr[reg].iom);
+
+}
+
+unsigned short trizeps6_cpld_readw(unsigned int reg)
+{
+ short value = 0;
+ if (reg != HIBE_S || reg != HIBE_R || reg != PWM || reg != PSET_S || reg
!= PSET_R) {
+
+ if ((cpld.addr[reg].iom != NULL))
+ value = readw(cpld.addr[reg].iom);
+ }
+ return value;
+}
+EXPORT_SYMBOL(trizeps6_cpld_readw);
+
+static int trizeps6_cpld_probe(struct platform_device *pdev)
+{
+ int i;
+
+ CPLD_CTRL_R = CPLD_CONTROL_ETHPHY | CPLD_CONTROL_GR;
+#ifdef STUART_SODIMM
+ CPLD_FTUR_S = CPLD_FEATURE_UART3_SODIMM;
+#endif
+ for (i = CTRL_S; i <= TTLO_R; i++) {
+ cpld.addr[i].res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ if (cpld.addr[i].res == NULL) {
+ dev_err(&pdev->dev, "cannot get resource %d area\n", i);
+ return -EIO;
+ }
+ cpld.addr[i].req = request_mem_region(cpld.addr[i].res->start,
+ 2, pdev->name);
+ if (cpld.addr[i].req == NULL) {
+ dev_err(&pdev->dev, "cannot claim addr area %d\n", i);
+ return -EIO;
+ }
+ cpld.addr[i].iom = ioremap(cpld.addr[i].res->start, 2);
+ if (cpld.addr[i].iom == NULL) {
+ dev_err(&pdev->dev, "cannot remap addr area %d\n", i);
+ return -EIO;
+ }
+ switch (i) {
+ case CTRL_R:
+ trizeps6_cpld_writew(CTRL_R, CPLD_CTRL_R);
+ break;
+ case FTUR_S:
+ trizeps6_cpld_writew(FTUR_S, CPLD_FTUR_S);
+ break;
+ default:
+ ;
+
+ }
+ dev_dbg(&pdev->dev, "mapped region [%d] %08x -> %p\n", i,
+ (int)cpld.addr[i].req->start, cpld.addr[i].iom);
+ }
+
+
+ return 0;
+}
+
+static int trizeps6_cpld_remove(struct platform_device *pdev)
+{
+ dev_dbg(&pdev->dev, "trizeps6_cpld_remove()\n");
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int trizeps6_cpld_suspend(struct platform_device *pdev,
pm_message_t state)
+{
+ return 0;
+}
+
+static int trizeps6_cpld_resume(struct platform_device *pdev)
+{
+ return 0;
+}
+#endif
+
+static struct platform_driver trizeps6_cpld_driver = {
+ .probe = trizeps6_cpld_probe,
+ .remove = trizeps6_cpld_remove,
+#ifdef CONFIG_PM
+ .suspend = trizeps6_cpld_suspend,
+ .resume = trizeps6_cpld_resume,
+#endif
+ .driver = {
+ .name = "trizeps6-cpld",
+ },
+};
+
+
+static int __devinit trizeps6_cpld_init(void)
+{
+
+ return platform_driver_register(&trizeps6_cpld_driver);
+}
+
+static void trizeps6_cpld_exit(void)
+{
+ platform_driver_unregister(&trizeps6_cpld_driver);
+}
+
+arch_initcall(trizeps6_cpld_init);
+module_exit(trizeps6_cpld_exit);
+
+MODULE_AUTHOR("Yupeng Schneider <yupeng.schneider@...glemail.com>");
+MODULE_DESCRIPTION("Trizeps VI CPLD");
+MODULE_LICENSE("GPL");
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists