linux-kernel - Re: SMBIOS / DMI Event Logs in Linux?

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 10 Feb 2011 18:19:47 -0800
From:	Mike Waychison <mikew@...gle.com>
To:	Greg KH <greg@...ah.com>
CC:	Alan Cox <alan@...rguk.ukuu.org.uk>,
	Tim Hockin <thockin@...gle.com>,
	Robert Lippert <rlippert@...gle.com>,
	LKML <linux-kernel@...r.kernel.org>
Subject: Re: SMBIOS / DMI Event Logs in Linux?

On 02/10/11 17:25, Greg KH wrote:
> On Thu, Feb 10, 2011 at 03:18:14PM -0800, Mike Waychison wrote:
>> Hey guys,
>>
>> I need some guidance. Do either of you know of any attempts to have
>> the kernel decode and display/interact with DMI type 15: System
>> Event Log?
>
> I don't have any experience in this area, but I do have one comment on
> your proposal below:
>
>> The event log I'm dealing with while cleaning up the "gsmi" driver
>> interacts with a log that is modeled after the System Event Log.
>> I'm wondering if there is any precedent for a clean way to expose
>> the event log, I'd like to use it (replacing the ioctls from my
>> earlier patch series send-out).
>>
>> FYI, we use OEM specific headers and descriptors, which probably
>> doesn't help.
>>
>> Do most folks that need access to this data rely on /dev/mem and
>> dmidecode?  I'd like to avoid going that route if possible.
>>
>> Lacking any better ideas though, I was thinking of something along
>> the lines of the following:
>>
>>
>> $ cat /sys/firmware/gsmi/eventlog
>> <offset>  <boot number>  <recorded time>  <quoted reason>  <optional data>
>> ...
>>
>> with a single event log entry per line.
>>    <offset>  would be the record number,
>>    <boot number>  is the recorded boot number
>>    <recorded time>  comes from each record,
>>    <quoted reason>  is the English translation of Event Log Types from
>> the DMTF standard + vendor extended types we use.
>>    <optional data>  is space separated values associated with<quoted reason>
>
> Ick, no, remember, sysfs is "one value per file".  doing even a single
> line like you describe here isn't ok, not to mention a huge buffer of
> these lines.
>
> And no, a "binary" sysfs file is not ok either.

Works fine for the /sys/firmware/efi stuff.  Works well enough for 
/sys/firmware/acpi too.

>
> Now your idea for such a log file is fine, I'm not saying that's not ok,
> or acceptable, just don't put it in sysfs, sorry.  Try using the ring
> buffer framework from the tracing code perhaps?
>
> Or use debugfs?  Or make a 'firmwarefs'?  I can easily knock that
> together if you need it.

Are you seriously asking for another filesystem?

I don't get why you're holding me to these standards that that are 
totally missed by these same subsystems that you maintain.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/