| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20110211082455.GA16802@marc.osknowledge.org> Date: Fri, 11 Feb 2011 09:24:55 +0100 From: Marc Koschewski <marc@...nowledge.org> To: linux-kernel@...r.kernel.org, bskeggs@...hat.com Subject: [REGRESSION? 2.6.38-rc4] nouveau NV50 screen freeze Hi all, I don't know if I suffer a regression of nouveau in 2.6.38-rc4. It feels like the screens tends to freeze often in that version but I cannot be sure if it is the 2.6.38-rc4 release or something else. The current 2.6.37 kernel has this in Xorg.0.log: [ 71.783] (II) AutoAddDevices is off - not adding device. [ 78.808] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561 [ 78.808] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 78.808] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz) [ 78.808] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz) [ 79.422] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561 [ 79.422] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 79.423] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz) [ 79.423] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz) [ 80.115] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561 [ 80.115] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 80.115] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz) [ 80.115] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz) [ 80.729] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561 [ 80.729] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 80.729] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz) [ 80.729] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz) [ 507.789] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561 [ 507.789] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 507.789] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz) [ 507.789] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz) [ 567.978] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561 [ 567.978] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 567.978] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz) [ 567.978] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz) The current 2.6.38-rc4 kernel has this in Xorg.0.log: [ 75.466] (II) AutoAddDevices is off - not adding device. [ 89.585] (II) AIGLX: Suspending AIGLX clients for VT switch [ 89.585] (II) NOUVEAU(0): NVLeaveVT is called. [ 97.577] (II) Open ACPI successful (/var/run/acpid.socket) [ 97.578] (II) AIGLX: Resuming AIGLX clients after VT switch [ 97.578] (II) NOUVEAU(0): NVEnterVT is called. [ 97.691] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561 [ 97.691] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 97.691] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz) [ 97.691] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz) [ 98.322] (II) Configured Mouse: ps2EnableDataReporting: succeeded [ 957.921] (II) 3rd Button detected: disabling emulate3Button [ 2852.323] (II) AIGLX: Suspending AIGLX clients for VT switch [ 2852.323] (II) NOUVEAU(0): NVLeaveVT is called. [ 2855.850] (II) Open ACPI successful (/var/run/acpid.socket) [ 2855.850] (II) AIGLX: Resuming AIGLX clients after VT switch [ 2855.850] (II) NOUVEAU(0): NVEnterVT is called. [ 2855.966] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561 [ 2855.966] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 2855.966] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz) [ 2855.966] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz) [ 2856.597] (II) Configured Mouse: ps2EnableDataReporting: succeeded [ 2863.361] (II) AIGLX: Suspending AIGLX clients for VT switch [ 2863.361] (II) NOUVEAU(0): NVLeaveVT is called. [ 2879.447] (II) Open ACPI successful (/var/run/acpid.socket) [ 2879.447] (II) AIGLX: Resuming AIGLX clients after VT switch [ 2879.447] (II) NOUVEAU(0): NVEnterVT is called. [ 2879.561] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561 [ 2879.561] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 2879.561] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz) [ 2879.561] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz) [ 2880.192] (II) Configured Mouse: ps2EnableDataReporting: succeeded [ 2884.543] (II) AIGLX: Suspending AIGLX clients for VT switch [ 2884.543] (II) NOUVEAU(0): NVLeaveVT is called. [ 2890.337] (II) Open ACPI successful (/var/run/acpid.socket) [ 2890.337] (II) AIGLX: Resuming AIGLX clients after VT switch [ 2890.337] (II) NOUVEAU(0): NVEnterVT is called. [ 2890.451] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561 [ 2890.451] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 2890.451] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz) [ 2890.451] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz) [ 2891.081] (II) Configured Mouse: ps2EnableDataReporting: succeeded [ 2895.780] (II) AIGLX: Suspending AIGLX clients for VT switch [ 2895.780] (II) NOUVEAU(0): NVLeaveVT is called. [ 2917.475] (II) Open ACPI successful (/var/run/acpid.socket) [ 2917.475] (II) AIGLX: Resuming AIGLX clients after VT switch [ 2917.475] (II) NOUVEAU(0): NVEnterVT is called. [ 2917.588] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561 [ 2917.588] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 2917.588] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz) [ 2917.588] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz) [ 2918.219] (II) Configured Mouse: ps2EnableDataReporting: succeeded [ 2921.735] (II) AIGLX: Suspending AIGLX clients for VT switch [ 2921.735] (II) NOUVEAU(0): NVLeaveVT is called. [ 2988.993] (II) Open ACPI successful (/var/run/acpid.socket) [ 2988.993] (II) AIGLX: Resuming AIGLX clients after VT switch [ 2988.993] (II) NOUVEAU(0): NVEnterVT is called. [ 2989.107] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561 [ 2989.107] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 2989.107] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz) [ 2989.107] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz) [ 2989.738] (II) Configured Mouse: ps2EnableDataReporting: succeeded [ 2997.111] (II) AIGLX: Suspending AIGLX clients for VT switch [ 2997.111] (II) NOUVEAU(0): NVLeaveVT is called. [ 2997.952] (II) Open ACPI successful (/var/run/acpid.socket) [ 2997.952] (II) AIGLX: Resuming AIGLX clients after VT switch [ 2997.952] (II) NOUVEAU(0): NVEnterVT is called. [ 2998.065] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561 [ 2998.065] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 2998.065] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz) [ 2998.065] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz) [ 2998.700] (II) Configured Mouse: ps2EnableDataReporting: succeeded [ 2999.201] (II) AIGLX: Suspending AIGLX clients for VT switch [ 2999.201] (II) NOUVEAU(0): NVLeaveVT is called. [ 3045.403] (II) Open ACPI successful (/var/run/acpid.socket) [ 3045.404] (II) AIGLX: Resuming AIGLX clients after VT switch [ 3045.404] (II) NOUVEAU(0): NVEnterVT is called. [ 3045.519] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561 [ 3045.519] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 3045.519] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz) [ 3045.519] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz) [ 3046.151] (II) Configured Mouse: ps2EnableDataReporting: succeeded [ 3118.308] (II) AIGLX: Suspending AIGLX clients for VT switch [ 3118.308] (II) NOUVEAU(0): NVLeaveVT is called. [ 3119.091] (II) Open ACPI successful (/var/run/acpid.socket) [ 3119.091] (II) AIGLX: Resuming AIGLX clients after VT switch [ 3119.091] (II) NOUVEAU(0): NVEnterVT is called. [ 3119.204] (II) NOUVEAU(0): EDID vendor "LEN", prod id 16561 [ 3119.204] (II) NOUVEAU(0): Printing DDC gathered Modelines: [ 3119.204] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 1930 900 903 906 912 -hsync -vsync (54.9 kHz) [ 3119.204] (II) NOUVEAU(0): Modeline "1600x900"x0.0 106.00 1600 1664 1706 2324 900 903 906 912 -hsync -vsync (45.6 kHz) [ 3119.838] (II) Configured Mouse: ps2EnableDataReporting: succeeded [ 3120.522] (II) AIGLX: Suspending AIGLX clients for VT switch [ 3120.522] (II) NOUVEAU(0): NVLeaveVT is called. [ 3125.951] (II) UnloadModule: "mouse" [ 3125.951] (II) UnloadModule: "kbd" [ 3125.961] (II) NOUVEAU(0): Closed GPU channel 2 [ 3125.976] (WW) xf86CloseConsole: VT_WAITACTIVE failed: Interrupted system call but I don't know if it's related to the screen freeze. Does anyone experience the similar behavior? Regards, Marc -- Marc Koschewski -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists