| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1297530663-26234-8-git-send-email-tj@kernel.org>
Date: Sat, 12 Feb 2011 18:10:44 +0100
From: Tejun Heo <tj@...nel.org>
To: linux-kernel@...r.kernel.org, x86@...nel.org, yinghai@...nel.org,
brgerst@...il.com, gorcunov@...il.com, shaohui.zheng@...el.com,
rientjes@...gle.com, mingo@...e.hu, hpa@...ux.intel.com
Cc: Tejun Heo <tj@...nel.org>
Subject: [PATCH 07/26] x86-64, NUMA: Restructure initmem_init()
Reorganize initmem_init() such that,
* Different NUMA init methods are iterated in a consistent way.
* Each iteration re-initializes all the parameters and different
method can be tried after a failure.
* Dummy init is handled the same as other methods.
Apart from how retry after failure, this patch doesn't change the
behavior. The call sequences are kept equivalent across the
conversion.
After the change, bad_srat() doesn't need to clear apic to node
mapping or worry about numa_off. Simplified accordingly.
Signed-off-by: Tejun Heo <tj@...nel.org>
Cc: Yinghai Lu <yinghai@...nel.org>
Cc: Brian Gerst <brgerst@...il.com>
Cc: Cyrill Gorcunov <gorcunov@...il.com>
Cc: Shaohui Zheng <shaohui.zheng@...el.com>
Cc: David Rientjes <rientjes@...gle.com>
Cc: Ingo Molnar <mingo@...e.hu>
Cc: H. Peter Anvin <hpa@...ux.intel.com>
---
arch/x86/mm/numa_64.c | 94 ++++++++++++++++++++++++++----------------------
arch/x86/mm/srat_64.c | 4 +--
2 files changed, 52 insertions(+), 46 deletions(-)
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 4105728..ba7e5b6 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -579,64 +579,72 @@ static int __init numa_emulation(unsigned long start_pfn,
}
#endif /* CONFIG_NUMA_EMU */
-void __init initmem_init(void)
+static int dummy_numa_init(void)
{
- int acpi = 0, amd = 0;
- int i;
-
-#ifdef CONFIG_ACPI_NUMA
- /*
- * Parse SRAT to discover nodes.
- */
- acpi = !x86_acpi_numa_init();
-#endif
-
-#ifdef CONFIG_AMD_NUMA
- if (!acpi)
- amd = !amd_numa_init();
-#endif
-
- nodes_clear(node_possible_map);
- nodes_clear(node_online_map);
-
-#ifdef CONFIG_NUMA_EMU
- setup_physnodes(0, max_pfn << PAGE_SHIFT, acpi, amd);
- if (cmdline && !numa_emulation(0, max_pfn, acpi, amd))
- return;
- setup_physnodes(0, max_pfn << PAGE_SHIFT, acpi, amd);
- nodes_clear(node_possible_map);
- nodes_clear(node_online_map);
-#endif
-
-#ifdef CONFIG_ACPI_NUMA
- if (!numa_off && acpi && !acpi_scan_nodes())
- return;
- nodes_clear(node_possible_map);
- nodes_clear(node_online_map);
-#endif
+ return 0;
+}
-#ifdef CONFIG_AMD_NUMA
- if (!numa_off && amd && !amd_scan_nodes())
- return;
- nodes_clear(node_possible_map);
- nodes_clear(node_online_map);
-#endif
+static int dummy_scan_nodes(void)
+{
printk(KERN_INFO "%s\n",
numa_off ? "NUMA turned off" : "No NUMA configuration found");
-
printk(KERN_INFO "Faking a node at %016lx-%016lx\n",
0LU, max_pfn << PAGE_SHIFT);
+
/* setup dummy node covering all memory */
memnode_shift = 63;
memnodemap = memnode.embedded_map;
memnodemap[0] = 0;
node_set_online(0);
node_set(0, node_possible_map);
- for (i = 0; i < MAX_LOCAL_APIC; i++)
- set_apicid_to_node(i, NUMA_NO_NODE);
memblock_x86_register_active_regions(0, 0, max_pfn);
setup_node_bootmem(0, 0, max_pfn << PAGE_SHIFT);
numa_init_array();
+
+ return 0;
+}
+
+void __init initmem_init(void)
+{
+ int (*numa_init[])(void) = { [2] = dummy_numa_init };
+ int (*scan_nodes[])(void) = { [2] = dummy_scan_nodes };
+ int i, j;
+
+ if (!numa_off) {
+#ifdef CONFIG_ACPI_NUMA
+ numa_init[0] = x86_acpi_numa_init;
+ scan_nodes[0] = acpi_scan_nodes;
+#endif
+#ifdef CONFIG_AMD_NUMA
+ numa_init[1] = amd_numa_init;
+ scan_nodes[1] = amd_scan_nodes;
+#endif
+ }
+
+ for (i = 0; i < ARRAY_SIZE(numa_init); i++) {
+ if (!numa_init[i])
+ continue;
+
+ for (j = 0; j < MAX_LOCAL_APIC; j++)
+ set_apicid_to_node(j, NUMA_NO_NODE);
+
+ nodes_clear(node_possible_map);
+ nodes_clear(node_online_map);
+
+ if (numa_init[i]() < 0)
+ continue;
+#ifdef CONFIG_NUMA_EMU
+ setup_physnodes(0, max_pfn << PAGE_SHIFT, i == 0, i == 1);
+ if (cmdline && !numa_emulation(0, max_pfn, i == 0, i == 1))
+ return;
+ setup_physnodes(0, max_pfn << PAGE_SHIFT, i == 0, i == 1);
+ nodes_clear(node_possible_map);
+ nodes_clear(node_online_map);
+#endif
+ if (!scan_nodes[i]())
+ return;
+ }
+ BUG();
}
unsigned long __init numa_free_all_bootmem(void)
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 8d145ae..2da8b65 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -78,8 +78,6 @@ static __init void bad_srat(void)
int i;
printk(KERN_ERR "SRAT: SRAT not used.\n");
acpi_numa = -1;
- for (i = 0; i < MAX_LOCAL_APIC; i++)
- set_apicid_to_node(i, NUMA_NO_NODE);
for (i = 0; i < MAX_NUMNODES; i++) {
nodes[i].start = nodes[i].end = 0;
nodes_add[i].start = nodes_add[i].end = 0;
@@ -89,7 +87,7 @@ static __init void bad_srat(void)
static __init inline int srat_disabled(void)
{
- return numa_off || acpi_numa < 0;
+ return acpi_numa < 0;
}
/* Callback for SLIT parsing */
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists