| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1297689710-17840-1-git-send-email-eibach@gdsys.de>
Date: Mon, 14 Feb 2011 14:21:50 +0100
From: Dirk Eibach <eibach@...ys.de>
To: linux-kernel@...r.kernel.org
Cc: khali@...ux-fr.org, guenter.roeck@...csson.com,
lm-sensors@...sensors.org, rdunlap@...otime.net,
linux-doc@...r.kernel.org, Dirk Eibach <eibach@...ys.de>
Subject: [PATCH v2] hwmon: Add support for Texas Instruments ADS1015
Signed-off-by: Dirk Eibach <eibach@...ys.de>
---
Changes since v1:
- fixed/extended Documentation
- removed unused register definitions
- hardcoded PGA fullscale table size
- made sure patch applies against v2.6.38-rc4
- reordered functions to avoid forward declaration
- results from i2c_smbus_read_word_data() are handled correctly
- moved locking into ads1015_read_value()
- removed unnecessray clearing of bit
- proper error handling in ads1015_read_value()
- use DIV_ROUND_CLOSEST for scaling result
- removed detect()
Documentation/hwmon/ads1015 | 33 ++++++
drivers/hwmon/Kconfig | 10 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/ads1015.c | 246 +++++++++++++++++++++++++++++++++++++++++++
4 files changed, 290 insertions(+), 0 deletions(-)
create mode 100644 Documentation/hwmon/ads1015
create mode 100644 drivers/hwmon/ads1015.c
diff --git a/Documentation/hwmon/ads1015 b/Documentation/hwmon/ads1015
new file mode 100644
index 0000000..e2dc689
--- /dev/null
+++ b/Documentation/hwmon/ads1015
@@ -0,0 +1,33 @@
+Kernel driver ads1015
+=====================
+
+Supported chips:
+ * Texas Instruments ADS1015
+ Prefix: 'ads1015'
+ Addresses scanned: I2C 0x48, 0x49, 0x4a, 0x4b
+ Datasheet: Publicly available at the Texas Instruments website :
+ http://focus.ti.com/lit/ds/symlink/ads1015.pdf
+
+Authors:
+ Dirk Eibach, Guntermann & Drunck GmbH <eibach@...ys.de>
+
+Description
+-----------
+
+This driver implements support for the Texas Instruments ADS1015.
+
+This device is a 12-bit A-D converter with 4 inputs.
+
+The inputs can be used single ended or in certain differential combinations.
+
+On certain systems it makes sense to access absolute voltage values as well
+as voltage differences. So all available combinations are made available by
+8 "virtual" inputs:
+in0: Voltage over AIN0 and AIN1.
+in1: Voltage over AIN0 and AIN3.
+in2: Voltage over AIN1 and AIN3.
+in3: Voltage over AIN2 and AIN3.
+in4: Voltage over AIN0 and GND.
+in5: Voltage over AIN1 and GND.
+in6: Voltage over AIN2 and GND.
+in7: Voltage over AIN3 and GND.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 773e484..7e247f7 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -871,6 +871,16 @@ config SENSORS_SMSC47B397
This driver can also be built as a module. If so, the module
will be called smsc47b397.
+config SENSORS_ADS1015
+ tristate "Texas Instruments ADS1015"
+ depends on I2C
+ help
+ If you say yes here you get support for Texas Instruments ADS1015
+ 12-bit 4-input ADC device.
+
+ This driver can also be built as a module. If so, the module
+ will be called ads1015.
+
config SENSORS_ADS7828
tristate "Texas Instruments ADS7828"
depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index dde02d9..aae4036 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o
obj-$(CONFIG_SENSORS_ADM1029) += adm1029.o
obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o
obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o
+obj-$(CONFIG_SENSORS_ADS1015) += ads1015.o
obj-$(CONFIG_SENSORS_ADS7828) += ads7828.o
obj-$(CONFIG_SENSORS_ADS7871) += ads7871.o
obj-$(CONFIG_SENSORS_ADT7411) += adt7411.o
diff --git a/drivers/hwmon/ads1015.c b/drivers/hwmon/ads1015.c
new file mode 100644
index 0000000..7fb30ae
--- /dev/null
+++ b/drivers/hwmon/ads1015.c
@@ -0,0 +1,246 @@
+/*
+ * ads1015.c - lm_sensors driver for ads1015 12-bit 4-input ADC
+ * (C) Copyright 2010
+ * Dirk Eibach, Guntermann & Drunck GmbH <eibach@...ys.de>
+ *
+ * Based on the ads7828 driver by Steve Hardy.
+ *
+ * Datasheet available at: http://focus.ti.com/lit/ds/symlink/ads1015.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+
+/* ADS1015 registers */
+enum {
+ ADS1015_CONVERSION = 0,
+ ADS1015_CONFIG = 1,
+};
+
+/* PGA fullscale voltages in mV */
+static const unsigned int fullscale_table[8] = {
+ 6144, 4096, 2048, 1024, 512, 256, 256, 256 };
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
+ I2C_CLIENT_END };
+
+/* Each client has this additional data */
+struct ads1015_data {
+ struct device *hwmon_dev;
+ struct mutex update_lock; /* mutex protect updates */
+};
+
+static s32 ads1015_read_reg(struct i2c_client *client, unsigned int reg)
+{
+ s32 data = i2c_smbus_read_word_data(client, reg);
+
+ return (data < 0) ? data : swab16(data);
+}
+
+static s32 ads1015_write_reg(struct i2c_client *client, unsigned int reg,
+ u16 val)
+{
+ return i2c_smbus_write_word_data(client, reg, swab16(val));
+}
+
+static int ads1015_read_value(struct i2c_client *client, unsigned int channel,
+ int *value)
+{
+ u16 config;
+ s16 conversion;
+ unsigned int pga;
+ int fullscale;
+ unsigned int k;
+ struct ads1015_data *data = i2c_get_clientdata(client);
+ int res;
+
+ mutex_lock(&data->update_lock);
+
+ /* get fullscale voltage */
+ res = ads1015_read_reg(client, ADS1015_CONFIG);
+ if (res < 0)
+ goto err_unlock;
+ config = res;
+ pga = (config >> 9) & 0x0007;
+ fullscale = fullscale_table[pga];
+
+ /* set channel and start single conversion */
+ config &= ~(0x0007 << 12);
+ config |= (1 << 15) | (1 << 8) | (channel & 0x0007) << 12;
+
+ /* wait until conversion finished */
+ res = ads1015_write_reg(client, ADS1015_CONFIG, config);
+ if (res < 0)
+ goto err_unlock;
+ for (k = 0; k < 5; ++k) {
+ schedule_timeout(msecs_to_jiffies(1));
+ res = ads1015_read_reg(client, ADS1015_CONFIG);
+ if (res < 0)
+ goto err_unlock;
+ config = res;
+ if (config & (1 << 15))
+ break;
+ }
+ if (k == 5)
+ return -EIO;
+
+ res = ads1015_read_reg(client, ADS1015_CONVERSION);
+ if (res < 0)
+ goto err_unlock;
+ conversion = res;
+
+ mutex_unlock(&data->update_lock);
+
+ *value = DIV_ROUND_CLOSEST(conversion * fullscale, 0x7ff0);
+
+ return 0;
+
+err_unlock:
+ mutex_unlock(&data->update_lock);
+ return res;
+}
+
+/* sysfs callback function */
+static ssize_t show_in(struct device *dev, struct device_attribute *da,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct i2c_client *client = to_i2c_client(dev);
+ int in;
+ int res;
+
+ res = ads1015_read_value(client, attr->index, &in);
+
+ return (res < 0) ? res : sprintf(buf, "%d\n", in);
+}
+
+#define in_reg(offset)\
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in,\
+ NULL, offset)
+
+in_reg(0);
+in_reg(1);
+in_reg(2);
+in_reg(3);
+in_reg(4);
+in_reg(5);
+in_reg(6);
+in_reg(7);
+
+static struct attribute *ads1015_attributes[] = {
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in6_input.dev_attr.attr,
+ &sensor_dev_attr_in7_input.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group ads1015_group = {
+ .attrs = ads1015_attributes,
+};
+
+static int ads1015_remove(struct i2c_client *client)
+{
+ struct ads1015_data *data = i2c_get_clientdata(client);
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &ads1015_group);
+ kfree(data);
+ return 0;
+}
+
+static int ads1015_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ads1015_data *data;
+ int err;
+
+ data = kzalloc(sizeof(struct ads1015_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+
+ /* Register sysfs hooks */
+ err = sysfs_create_group(&client->dev.kobj, &ads1015_group);
+ if (err)
+ goto exit_free;
+
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto exit_remove;
+ }
+
+ return 0;
+
+exit_remove:
+ sysfs_remove_group(&client->dev.kobj, &ads1015_group);
+exit_free:
+ kfree(data);
+exit:
+ return err;
+}
+
+static const struct i2c_device_id ads1015_id[] = {
+ { "ads1015", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ads1015_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver ads1015_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "ads1015",
+ },
+ .probe = ads1015_probe,
+ .remove = ads1015_remove,
+ .id_table = ads1015_id,
+ .address_list = normal_i2c,
+};
+
+static int __init sensors_ads1015_init(void)
+{
+ return i2c_add_driver(&ads1015_driver);
+}
+
+static void __exit sensors_ads1015_exit(void)
+{
+ i2c_del_driver(&ads1015_driver);
+}
+
+MODULE_AUTHOR("Dirk Eibach <eibach@...ys.de>");
+MODULE_DESCRIPTION("ADS1015 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_ads1015_init);
+module_exit(sensors_ads1015_exit);
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists