| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4D621FA6.7030509@st.com>
Date: Mon, 21 Feb 2011 13:47:42 +0530
From: pratyush <pratyush.anand@...com>
To: unlisted-recipients:; (no To-header on input)
Cc: "akpm@...ux-foundation.org" <akpm@...ux-foundation.org>,
"rdunlap@...otime.net" <rdunlap@...otime.net>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"gregkh@...e.de" <gregkh@...e.de>,
"jbarnes@...tuousgeek.org" <jbarnes@...tuousgeek.org>,
Viresh KUMAR <viresh.kumar@...com>,
Shiraz HASHIM <shiraz.hashim@...com>
Subject: Re: [PATCH V5] ST SPEAr: PCIE gadget suppport
Sorry, Please discard this patch.
Regards
Pratyush
On 2/21/2011 1:43 PM, y wrote:
> From: Pratyush Anand <pratyush.anand@...com>
>
> This is a configurable gadget. can be configured by configfs interface. Any
> IP available at PCIE bus can be programmed to be used by host
> controller.It supoorts both INTX and MSI.
> By default, gadget is configured for INTX and SYSRAM1 is mapped to BAR0
> with size 0x1000
>
> Changes since V4:
> - All documentation related comments incorporated
>
> Changes since V3:
> - support for multiple instances of such device
> - changes to minimzie portability issue on 64 bit machine
> - unnecessary typecast removed
> - sysfs_streq used in place of complex code
>
> Changes since V2:
> - driver has been moved from sysfs to configfs
> - Documentation/ABI directory has also been updated
> - typo error in documenation has been corrected
> - clk value is checked after encapsulating by IS_ERR
>
> Changes since V1:
> - __iomem added for register addresses
> - kerneldoc comment removed whereever not required.
> - help node moved from sysfs to documentation/misc-devices
> - strict_strtoul used instead of sscanf
>
> Signed-off-by: Pratyush Anand <pratyush.anand@...com>
> ---
> .../ABI/testing/configfs-spear-pcie-gadget | 30 +
> Documentation/misc-devices/spear-pcie-gadget.txt | 129 +++
> drivers/misc/Kconfig | 10 +
> drivers/misc/Makefile | 1 +
> drivers/misc/spear13xx_pcie_gadget.c | 908 ++++++++++++++++++++
> 5 files changed, 1078 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/ABI/testing/configfs-spear-pcie-gadget
> create mode 100644 Documentation/misc-devices/spear-pcie-gadget.txt
> create mode 100644 drivers/misc/spear13xx_pcie_gadget.c
>
> diff --git a/Documentation/ABI/testing/configfs-spear-pcie-gadget b/Documentation/ABI/testing/configfs-spear-pcie-gadget
> new file mode 100644
> index 0000000..29593d0
> --- /dev/null
> +++ b/Documentation/ABI/testing/configfs-spear-pcie-gadget
> @@ -0,0 +1,30 @@
> +What: /config/pcie-gadget
> +Date: Feb 2011
> +KernelVersion: 2.6.37
> +Contact: Pratyush Anand <pratyush.anand@...com>
> +Description:
> +
> + Interface is used to configure selected dual mode PCIe controller
> + as device and then program its various registers to configure it
> + as a particular device type.
> + This interfaces can be used to show spear's PCIe device capability.
> +
> + Nodes are only visible when configfs is mounted. To mount configfs
> + in /config directory use:
> + # mount -t configfs none /config/
> +
> + /config/pcie-gadget/
> + link ... used to enable ltssm and read its status.
> + int_type ...used to configure and read type of supported
> + interrupt
> + no_of_msi ... used to configure number of MSI vector needed and
> + to read no of MSI granted.
> + inta ... write 1 to assert INTA and 0 to de-assert.
> + send_msi ... write MSI vector to be sent.
> + vendor_id ... used to write and read vendor id (hex)
> + device_id ... used to write and read device id (hex)
> + bar0_size ... used to write and read bar0_size
> + bar0_address ... used to write and read bar0 mapped area in hex.
> + bar0_rw_offset ... used to write and read offset of bar0 where
> + bar0_data will be written or read.
> + bar0_data ... used to write and read data at bar0_rw_offset.
> diff --git a/Documentation/misc-devices/spear-pcie-gadget.txt b/Documentation/misc-devices/spear-pcie-gadget.txt
> new file mode 100644
> index 0000000..7b86b80
> --- /dev/null
> +++ b/Documentation/misc-devices/spear-pcie-gadget.txt
> @@ -0,0 +1,129 @@
> +Spear PCIe Gadget Driver:
> +
> +Author
> +=============
> +Pratyush Anand (pratyush.anand@...com)
> +
> +Location
> +============
> +driver/misc/spear13xx_pcie_gadget.c
> +
> +Supported Chip:
> +===================
> +SPEAr1300
> +SPEAr1310
> +
> +Menuconfig option:
> +==========================
> +Device Drivers
> + Misc devices
> + PCIe gadget support for SPEAr13XX platform
> +purpose
> +===========
> +This driver has several nodes which can be read/written by configfs interface.
> +Its main purpose is to configure selected dual mode PCIe controller as device
> +and then program its various registers to configure it as a particular device
> +type. This driver can be used to show spear's PCIe device capability.
> +
> +Description of different nodes:
> +=================================
> +
> +read behavior of nodes:
> +------------------------------
> +link :gives ltssm status.
> +int_type :type of supported interrupt
> +no_of_msi :zero if MSI is not enabled by host. A positive value is the
> + number of MSI vector granted.
> +vendor_id :returns programmed vendor id (hex)
> +device_id :returns programmed device id(hex)
> +bar0_size: :returns size of bar0 in hex.
> +bar0_address :returns address of bar0 mapped area in hex.
> +bar0_rw_offset :returns offset of bar0 for which bar0_data will return value.
> +bar0_data :returns data at bar0_rw_offset.
> +
> +write behavior of nodes:
> +------------------------------
> +link :write UP to enable ltsmm DOWN to disable
> +int_type :write interrupt type to be configured and (int_type could be
> + INTA, MSI or NO_INT). Select MSI only when you have programmed
> + no_of_msi node.
> +no_of_msi :number of MSI vector needed.
> +inta :write 1 to assert INTA and 0 to de-assert.
> +send_msi :write MSI vector to be sent.
> +vendor_id :write vendor id(hex) to be programmed.
> +device_id :write device id(hex) to be programmed.
> +bar0_size :write size of bar0 in hex. default bar0 size is 1000 (hex)
> + bytes.
> +bar0_address :write address of bar0 mapped area in hex. (default mapping of
> + bar0 is SYSRAM1(E0800000). Always program bar size before bar
> + address. Kernel might modify bar size and address for alignment, so
> + read back bar size and address after writing to cross check.
> +bar0_rw_offset :write offset of bar0 for which bar0_data will write value.
> +bar0_data :write data to be written at bar0_rw_offset.
> +
> +Node programming example
> +===========================
> +Program all PCIe registers in such a way that when this device is connected
> +to the PCIe host, then host sees this device as 1MB RAM.
> +#mount -t configfs none /Config
> +# cd /config/pcie_gadget/
> +Now you have all the nodes in this directory.
> +program vendor id as 0x104a
> +# echo 104A >> vendor_id
> +
> +program device id as 0xCD80
> +# echo CD80 >> device_id
> +
> +program BAR0 size as 1MB
> +# echo 100000 >> bar0_size
> +
> +check for programmed bar0 size
> +# cat bar0_size
> +
> +Program BAR0 Address as DDR (0x2100000). This is the physical address of
> +memory, which is to be made visible to PCIe host. Similarly any other peripheral
> +can also be made visible to PCIe host. E.g., if you program base address of UART
> +as BAR0 address then when this device will be connected to a host, it will be
> +visible as UART.
> +# echo 2100000 >> bar0_address
> +
> +program interrupt type : INTA
> +# echo INTA >> int_type
> +
> +go for link up now.
> +# echo UP >> link
> +
> +It will have to be insured that, once link up is done on gadget, then only host
> +is initialized and start to search PCIe devices on its port.
> +
> +/*wait till link is up*/
> +# cat link
> +wait till it returns UP.
> +
> +To assert INTA
> +# echo 1 >> inta
> +
> +To de-assert INTA
> +# echo 0 >> inta
> +
> +if MSI is to be used as interrupt, program no of msi vector needed (say4)
> +# echo 4 >> no_of_msi
> +
> +select MSI as interrupt type
> +# echo MSI >> int_type
> +
> +go for link up now
> +# echo UP >> link
> +
> +wait till link is up
> +# cat link
> +An application can repetitively read this node till link is found UP. It can
> +sleep between two read.
> +
> +wait till msi is enabled
> +# cat no_of_msi
> +Should return 4 (number of requested MSI vector)
> +
> +to send msi vector 2
> +# echo 2 >> send_msi
> +#cd -
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index 4d073f1..dea052d 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -394,6 +394,16 @@ config DS1682
> This driver can also be built as a module. If so, the module
> will be called ds1682.
>
> +config SPEAR13XX_PCIE_GADGET
> + bool "PCIe gadget support for SPEAr13XX platform"
> + depends on ARCH_SPEAR13XX
> + default n
> + help
> + This option enables gadget support for PCIe controller. If
> + board file defines any controller as PCIe endpoint then a sysfs
> + entry will be created for that controller. User can use these
> + sysfs node to configure PCIe EP as per his requirements.
> +
> config TI_DAC7512
> tristate "Texas Instruments DAC7512"
> depends on SPI && SYSFS
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index 98009cc..c489536 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -37,6 +37,7 @@ obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/
> obj-$(CONFIG_HMC6352) += hmc6352.o
> obj-y += eeprom/
> obj-y += cb710/
> +obj-$(CONFIG_SPEAR13XX_PCIE_GADGET) += spear13xx_pcie_gadget.o
> obj-$(CONFIG_VMWARE_BALLOON) += vmw_balloon.o
> obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o
> obj-$(CONFIG_PCH_PHUB) += pch_phub.o
> diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
> new file mode 100644
> index 0000000..ec3b8c9
> --- /dev/null
> +++ b/drivers/misc/spear13xx_pcie_gadget.c
> @@ -0,0 +1,908 @@
> +/*
> + * drivers/misc/spear13xx_pcie_gadget.c
> + *
> + * Copyright (C) 2010 ST Microelectronics
> + * Pratyush Anand<pratyush.anand@...com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/slab.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pci_regs.h>
> +#include <linux/configfs.h>
> +#include <mach/pcie.h>
> +#include <mach/misc_regs.h>
> +
> +#define IN0_MEM_SIZE (200 * 1024 * 1024 - 1)
> +/* In current implementation address translation is done using IN0 only.
> + * So IN1 start address and IN0 end address has been kept same
> +*/
> +#define IN1_MEM_SIZE (0 * 1024 * 1024 - 1)
> +#define IN_IO_SIZE (20 * 1024 * 1024 - 1)
> +#define IN_CFG0_SIZE (12 * 1024 * 1024 - 1)
> +#define IN_CFG1_SIZE (12 * 1024 * 1024 - 1)
> +#define IN_MSG_SIZE (12 * 1024 * 1024 - 1)
> +/* Keep default BAR size as 4K*/
> +/* AORAM would be mapped by default*/
> +#define INBOUND_ADDR_MASK (SPEAR13XX_SYSRAM1_SIZE - 1)
> +
> +#define INT_TYPE_NO_INT 0
> +#define INT_TYPE_INTX 1
> +#define INT_TYPE_MSI 2
> +struct spear_pcie_gadget_config {
> + void __iomem *base;
> + void __iomem *va_app_base;
> + void __iomem *va_dbi_base;
> + char int_type[10];
> + ulong requested_msi;
> + ulong configured_msi;
> + ulong bar0_size;
> + ulong bar0_rw_offset;
> + void __iomem *va_bar0_address;
> +};
> +
> +struct pcie_gadget_target {
> + struct configfs_subsystem subsys;
> + struct spear_pcie_gadget_config config;
> +};
> +
> +struct pcie_gadget_target_attr {
> + struct configfs_attribute attr;
> + ssize_t (*show)(struct spear_pcie_gadget_config *config,
> + char *buf);
> + ssize_t (*store)(struct spear_pcie_gadget_config *config,
> + const char *buf,
> + size_t count);
> +};
> +
> +static void enable_dbi_access(struct pcie_app_reg __iomem *app_reg)
> +{
> + /* Enable DBI access */
> + writel(readl(&app_reg->slv_armisc) | (1 << AXI_OP_DBI_ACCESS_ID),
> + &app_reg->slv_armisc);
> + writel(readl(&app_reg->slv_awmisc) | (1 << AXI_OP_DBI_ACCESS_ID),
> + &app_reg->slv_awmisc);
> +
> +}
> +
> +static void disable_dbi_access(struct pcie_app_reg __iomem *app_reg)
> +{
> + /* disable DBI access */
> + writel(readl(&app_reg->slv_armisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
> + &app_reg->slv_armisc);
> + writel(readl(&app_reg->slv_awmisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
> + &app_reg->slv_awmisc);
> +
> +}
> +
> +static void spear_dbi_read_reg(struct spear_pcie_gadget_config *config,
> + int where, int size, u32 *val)
> +{
> + struct pcie_app_reg __iomem *app_reg = config->va_app_base;
> + ulong va_address;
> +
> + /* Enable DBI access */
> + enable_dbi_access(app_reg);
> +
> + va_address = (ulong)config->va_dbi_base + (where & ~0x3);
> +
> + *val = readl(va_address);
> +
> + if (size == 1)
> + *val = (*val >> (8 * (where & 3))) & 0xff;
> + else if (size == 2)
> + *val = (*val >> (8 * (where & 3))) & 0xffff;
> +
> + /* Disable DBI access */
> + disable_dbi_access(app_reg);
> +}
> +
> +static void spear_dbi_write_reg(struct spear_pcie_gadget_config *config,
> + int where, int size, u32 val)
> +{
> + struct pcie_app_reg __iomem *app_reg = config->va_app_base;
> + ulong va_address;
> +
> + /* Enable DBI access */
> + enable_dbi_access(app_reg);
> +
> + va_address = (ulong)config->va_dbi_base + (where & ~0x3);
> +
> + if (size == 4)
> + writel(val, va_address);
> + else if (size == 2)
> + writew(val, va_address + (where & 2));
> + else if (size == 1)
> + writeb(val, va_address + (where & 3));
> +
> + /* Disable DBI access */
> + disable_dbi_access(app_reg);
> +}
> +
> +#define PCI_FIND_CAP_TTL 48
> +
> +static int pci_find_own_next_cap_ttl(struct spear_pcie_gadget_config *config,
> + u32 pos, int cap, int *ttl)
> +{
> + u32 id;
> +
> + while ((*ttl)--) {
> + spear_dbi_read_reg(config, pos, 1, &pos);
> + if (pos < 0x40)
> + break;
> + pos &= ~3;
> + spear_dbi_read_reg(config, pos + PCI_CAP_LIST_ID, 1, &id);
> + if (id == 0xff)
> + break;
> + if (id == cap)
> + return pos;
> + pos += PCI_CAP_LIST_NEXT;
> + }
> + return 0;
> +}
> +
> +static int pci_find_own_next_cap(struct spear_pcie_gadget_config *config,
> + u32 pos, int cap)
> +{
> + int ttl = PCI_FIND_CAP_TTL;
> +
> + return pci_find_own_next_cap_ttl(config, pos, cap, &ttl);
> +}
> +
> +static int pci_find_own_cap_start(struct spear_pcie_gadget_config *config,
> + u8 hdr_type)
> +{
> + u32 status;
> +
> + spear_dbi_read_reg(config, PCI_STATUS, 2, &status);
> + if (!(status & PCI_STATUS_CAP_LIST))
> + return 0;
> +
> + switch (hdr_type) {
> + case PCI_HEADER_TYPE_NORMAL:
> + case PCI_HEADER_TYPE_BRIDGE:
> + return PCI_CAPABILITY_LIST;
> + case PCI_HEADER_TYPE_CARDBUS:
> + return PCI_CB_CAPABILITY_LIST;
> + default:
> + return 0;
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * Tell if a device supports a given PCI capability.
> + * Returns the address of the requested capability structure within the
> + * device's PCI configuration space or 0 in case the device does not
> + * support it. Possible values for @cap:
> + *
> + * %PCI_CAP_ID_PM Power Management
> + * %PCI_CAP_ID_AGP Accelerated Graphics Port
> + * %PCI_CAP_ID_VPD Vital Product Data
> + * %PCI_CAP_ID_SLOTID Slot Identification
> + * %PCI_CAP_ID_MSI Message Signalled Interrupts
> + * %PCI_CAP_ID_CHSWP CompactPCI HotSwap
> + * %PCI_CAP_ID_PCIX PCI-X
> + * %PCI_CAP_ID_EXP PCI Express
> + */
> +static int pci_find_own_capability(struct spear_pcie_gadget_config *config,
> + int cap)
> +{
> + u32 pos;
> + u32 hdr_type;
> +
> + spear_dbi_read_reg(config, PCI_HEADER_TYPE, 1, &hdr_type);
> +
> + pos = pci_find_own_cap_start(config, hdr_type);
> + if (pos)
> + pos = pci_find_own_next_cap(config, pos, cap);
> +
> + return pos;
> +}
> +
> +static irqreturn_t spear_pcie_gadget_irq(int irq, void *dev_id)
> +{
> + return 0;
> +}
> +
> +/*
> + * configfs interfaces show/store functions
> + */
> +static ssize_t pcie_gadget_show_link(
> + struct spear_pcie_gadget_config *config,
> + char *buf)
> +{
> + struct pcie_app_reg __iomem *app_reg = config->va_app_base;
> +
> + if (readl(&app_reg->app_status_1) & ((u32)1 << XMLH_LINK_UP_ID))
> + return sprintf(buf, "UP");
> + else
> + return sprintf(buf, "DOWN");
> +}
> +
> +static ssize_t pcie_gadget_store_link(
> + struct spear_pcie_gadget_config *config,
> + const char *buf, size_t count)
> +{
> + struct pcie_app_reg __iomem *app_reg = config->va_app_base;
> +
> + if (sysfs_streq(buf, "UP"))
> + writel(readl(&app_reg->app_ctrl_0) | (1 << APP_LTSSM_ENABLE_ID),
> + &app_reg->app_ctrl_0);
> + else if (sysfs_streq(buf, "DOWN"))
> + writel(readl(&app_reg->app_ctrl_0)
> + & ~(1 << APP_LTSSM_ENABLE_ID),
> + &app_reg->app_ctrl_0);
> + else
> + return -EINVAL;
> + return count;
> +}
> +
> +static ssize_t pcie_gadget_show_int_type(
> + struct spear_pcie_gadget_config *config,
> + char *buf)
> +{
> + return sprintf(buf, "%s", config->int_type);
> +}
> +
> +static ssize_t pcie_gadget_store_int_type(
> + struct spear_pcie_gadget_config *config,
> + const char *buf, size_t count)
> +{
> + u32 cap, vec, flags;
> + ulong vector;
> +
> + if (sysfs_streq(buf, "INTA"))
> + spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
> +
> + else if (sysfs_streq(buf, "MSI")) {
> + vector = config->requested_msi;
> + vec = 0;
> + while (vector > 1) {
> + vector /= 2;
> + vec++;
> + }
> + spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 0);
> + cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
> + spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
> + flags &= ~PCI_MSI_FLAGS_QMASK;
> + flags |= vec << 1;
> + spear_dbi_write_reg(config, cap + PCI_MSI_FLAGS, 1, flags);
> + } else
> + return -EINVAL;
> +
> + strcpy(config->int_type, buf);
> +
> + return count;
> +}
> +
> +static ssize_t pcie_gadget_show_no_of_msi(
> + struct spear_pcie_gadget_config *config,
> + char *buf)
> +{
> + struct pcie_app_reg __iomem *app_reg = config->va_app_base;
> + u32 cap, vec, flags;
> + ulong vector;
> +
> + if ((readl(&app_reg->msg_status) & (1 << CFG_MSI_EN_ID))
> + != (1 << CFG_MSI_EN_ID))
> + vector = 0;
> + else {
> + cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
> + spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
> + flags &= ~PCI_MSI_FLAGS_QSIZE;
> + vec = flags >> 4;
> + vector = 1;
> + while (vec--)
> + vector *= 2;
> + }
> + config->configured_msi = vector;
> +
> + return sprintf(buf, "%lu", vector);
> +}
> +
> +static ssize_t pcie_gadget_store_no_of_msi(
> + struct spear_pcie_gadget_config *config,
> + const char *buf, size_t count)
> +{
> + if (strict_strtoul(buf, 0, &config->requested_msi))
> + return -EINVAL;
> + if (config->requested_msi > 32)
> + config->requested_msi = 32;
> +
> + return count;
> +}
> +
> +static ssize_t pcie_gadget_store_inta(
> + struct spear_pcie_gadget_config *config,
> + const char *buf, size_t count)
> +{
> + struct pcie_app_reg __iomem *app_reg = config->va_app_base;
> + ulong en;
> +
> + if (strict_strtoul(buf, 0, &en))
> + return -EINVAL;
> +
> + if (en)
> + writel(readl(&app_reg->app_ctrl_0) | (1 << SYS_INT_ID),
> + &app_reg->app_ctrl_0);
> + else
> + writel(readl(&app_reg->app_ctrl_0) & ~(1 << SYS_INT_ID),
> + &app_reg->app_ctrl_0);
> +
> + return count;
> +}
> +
> +static ssize_t pcie_gadget_store_send_msi(
> + struct spear_pcie_gadget_config *config,
> + const char *buf, size_t count)
> +{
> + struct pcie_app_reg __iomem *app_reg = config->va_app_base;
> + ulong vector;
> + u32 ven_msi;
> +
> + if (strict_strtoul(buf, 0, &vector))
> + return -EINVAL;
> +
> + if (!config->configured_msi)
> + return -EINVAL;
> +
> + if (vector >= config->configured_msi)
> + return -EINVAL;
> +
> + ven_msi = readl(&app_reg->ven_msi_1);
> + ven_msi &= ~VEN_MSI_FUN_NUM_MASK;
> + ven_msi |= 0 << VEN_MSI_FUN_NUM_ID;
> + ven_msi &= ~VEN_MSI_TC_MASK;
> + ven_msi |= 0 << VEN_MSI_TC_ID;
> + ven_msi &= ~VEN_MSI_VECTOR_MASK;
> + ven_msi |= vector << VEN_MSI_VECTOR_ID;
> +
> + /* generating interrupt for msi vector */
> + ven_msi |= VEN_MSI_REQ_EN;
> + writel(ven_msi, &app_reg->ven_msi_1);
> + udelay(1);
> + ven_msi &= ~VEN_MSI_REQ_EN;
> + writel(ven_msi, &app_reg->ven_msi_1);
> +
> + return count;
> +}
> +
> +static ssize_t pcie_gadget_show_vendor_id(
> + struct spear_pcie_gadget_config *config,
> + char *buf)
> +{
> + u32 id;
> +
> + spear_dbi_read_reg(config, PCI_VENDOR_ID, 2, &id);
> +
> + return sprintf(buf, "%x", id);
> +}
> +
> +static ssize_t pcie_gadget_store_vendor_id(
> + struct spear_pcie_gadget_config *config,
> + const char *buf, size_t count)
> +{
> + ulong id;
> +
> + if (strict_strtoul(buf, 0, &id))
> + return -EINVAL;
> +
> + spear_dbi_write_reg(config, PCI_VENDOR_ID, 2, id);
> +
> + return count;
> +}
> +
> +static ssize_t pcie_gadget_show_device_id(
> + struct spear_pcie_gadget_config *config,
> + char *buf)
> +{
> + u32 id;
> +
> + spear_dbi_read_reg(config, PCI_DEVICE_ID, 2, &id);
> +
> + return sprintf(buf, "%x", id);
> +}
> +
> +static ssize_t pcie_gadget_store_device_id(
> + struct spear_pcie_gadget_config *config,
> + const char *buf, size_t count)
> +{
> + ulong id;
> +
> + if (strict_strtoul(buf, 0, &id))
> + return -EINVAL;
> +
> + spear_dbi_write_reg(config, PCI_DEVICE_ID, 2, id);
> +
> + return count;
> +}
> +
> +static ssize_t pcie_gadget_show_bar0_size(
> + struct spear_pcie_gadget_config *config,
> + char *buf)
> +{
> + return sprintf(buf, "%lx", config->bar0_size);
> +}
> +
> +static ssize_t pcie_gadget_store_bar0_size(
> + struct spear_pcie_gadget_config *config,
> + const char *buf, size_t count)
> +{
> + ulong size;
> + u32 pos, pos1;
> + u32 no_of_bit = 0;
> +
> + if (strict_strtoul(buf, 0, &size))
> + return -EINVAL;
> + /* min bar size is 256 */
> + if (size <= 0x100)
> + size = 0x100;
> + /* max bar size is 1MB*/
> + else if (size >= 0x100000)
> + size = 0x100000;
> + else {
> + pos = 0;
> + pos1 = 0;
> + while (pos < 21) {
> + pos = find_next_bit((ulong *)&size, 21, pos);
> + if (pos != 21)
> + pos1 = pos + 1;
> + pos++;
> + no_of_bit++;
> + }
> + if (no_of_bit == 2)
> + pos1--;
> +
> + size = 1 << pos1;
> + }
> + config->bar0_size = size;
> + spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, size - 1);
> +
> + return count;
> +}
> +
> +static ssize_t pcie_gadget_show_bar0_address(
> + struct spear_pcie_gadget_config *config,
> + char *buf)
> +{
> + struct pcie_app_reg __iomem *app_reg = config->va_app_base;
> +
> + u32 address = readl(&app_reg->pim0_mem_addr_start);
> +
> + return sprintf(buf, "%x", address);
> +}
> +
> +static ssize_t pcie_gadget_store_bar0_address(
> + struct spear_pcie_gadget_config *config,
> + const char *buf, size_t count)
> +{
> + struct pcie_app_reg __iomem *app_reg = config->va_app_base;
> + ulong address;
> +
> + if (strict_strtoul(buf, 0, &address))
> + return -EINVAL;
> +
> + address &= ~(config->bar0_size - 1);
> + if (config->va_bar0_address)
> + iounmap(config->va_bar0_address);
> + config->va_bar0_address = ioremap(address, config->bar0_size);
> + if (!config->va_bar0_address)
> + return -ENOMEM;
> +
> + writel(address, &app_reg->pim0_mem_addr_start);
> +
> + return count;
> +}
> +
> +static ssize_t pcie_gadget_show_bar0_rw_offset(
> + struct spear_pcie_gadget_config *config,
> + char *buf)
> +{
> + return sprintf(buf, "%lx", config->bar0_rw_offset);
> +}
> +
> +static ssize_t pcie_gadget_store_bar0_rw_offset(
> + struct spear_pcie_gadget_config *config,
> + const char *buf, size_t count)
> +{
> + ulong offset;
> +
> + if (strict_strtoul(buf, 0, &offset))
> + return -EINVAL;
> +
> + if (offset % 4)
> + return -EINVAL;
> +
> + config->bar0_rw_offset = offset;
> +
> + return count;
> +}
> +
> +static ssize_t pcie_gadget_show_bar0_data(
> + struct spear_pcie_gadget_config *config,
> + char *buf)
> +{
> + ulong data;
> +
> + if (!config->va_bar0_address)
> + return -ENOMEM;
> +
> + data = readl((ulong)config->va_bar0_address + config->bar0_rw_offset);
> +
> + return sprintf(buf, "%lx", data);
> +}
> +
> +static ssize_t pcie_gadget_store_bar0_data(
> + struct spear_pcie_gadget_config *config,
> + const char *buf, size_t count)
> +{
> + ulong data;
> +
> + if (strict_strtoul(buf, 0, &data))
> + return -EINVAL;
> +
> + if (!config->va_bar0_address)
> + return -ENOMEM;
> +
> + writel(data, (ulong)config->va_bar0_address + config->bar0_rw_offset);
> +
> + return count;
> +}
> +
> +/*
> + * Attribute definitions.
> + */
> +
> +#define PCIE_GADGET_TARGET_ATTR_RO(_name) \
> +static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \
> + __CONFIGFS_ATTR(_name, S_IRUGO, pcie_gadget_show_##_name, NULL)
> +
> +#define PCIE_GADGET_TARGET_ATTR_WO(_name) \
> +static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \
> + __CONFIGFS_ATTR(_name, S_IWUSR, NULL, pcie_gadget_store_##_name)
> +
> +#define PCIE_GADGET_TARGET_ATTR_RW(_name) \
> +static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \
> + __CONFIGFS_ATTR(_name, S_IRUGO | S_IWUSR, pcie_gadget_show_##_name, \
> + pcie_gadget_store_##_name)
> +PCIE_GADGET_TARGET_ATTR_RW(link);
> +PCIE_GADGET_TARGET_ATTR_RW(int_type);
> +PCIE_GADGET_TARGET_ATTR_RW(no_of_msi);
> +PCIE_GADGET_TARGET_ATTR_WO(inta);
> +PCIE_GADGET_TARGET_ATTR_WO(send_msi);
> +PCIE_GADGET_TARGET_ATTR_RW(vendor_id);
> +PCIE_GADGET_TARGET_ATTR_RW(device_id);
> +PCIE_GADGET_TARGET_ATTR_RW(bar0_size);
> +PCIE_GADGET_TARGET_ATTR_RW(bar0_address);
> +PCIE_GADGET_TARGET_ATTR_RW(bar0_rw_offset);
> +PCIE_GADGET_TARGET_ATTR_RW(bar0_data);
> +
> +static struct configfs_attribute *pcie_gadget_target_attrs[] = {
> + &pcie_gadget_target_link.attr,
> + &pcie_gadget_target_int_type.attr,
> + &pcie_gadget_target_no_of_msi.attr,
> + &pcie_gadget_target_inta.attr,
> + &pcie_gadget_target_send_msi.attr,
> + &pcie_gadget_target_vendor_id.attr,
> + &pcie_gadget_target_device_id.attr,
> + &pcie_gadget_target_bar0_size.attr,
> + &pcie_gadget_target_bar0_address.attr,
> + &pcie_gadget_target_bar0_rw_offset.attr,
> + &pcie_gadget_target_bar0_data.attr,
> + NULL,
> +};
> +
> +static struct pcie_gadget_target *to_target(struct config_item *item)
> +{
> + return item ?
> + container_of(to_configfs_subsystem(to_config_group(item)),
> + struct pcie_gadget_target, subsys) : NULL;
> +}
> +
> +/*
> + * Item operations and type for pcie_gadget_target.
> + */
> +
> +static ssize_t pcie_gadget_target_attr_show(struct config_item *item,
> + struct configfs_attribute *attr,
> + char *buf)
> +{
> + ssize_t ret = -EINVAL;
> + struct pcie_gadget_target *target = to_target(item);
> + struct pcie_gadget_target_attr *t_attr =
> + container_of(attr, struct pcie_gadget_target_attr, attr);
> +
> + if (t_attr->show)
> + ret = t_attr->show(&target->config, buf);
> + return ret;
> +}
> +
> +static ssize_t pcie_gadget_target_attr_store(struct config_item *item,
> + struct configfs_attribute *attr,
> + const char *buf,
> + size_t count)
> +{
> + ssize_t ret = -EINVAL;
> + struct pcie_gadget_target *target = to_target(item);
> + struct pcie_gadget_target_attr *t_attr =
> + container_of(attr, struct pcie_gadget_target_attr, attr);
> +
> + if (t_attr->store)
> + ret = t_attr->store(&target->config, buf, count);
> + return ret;
> +}
> +
> +static struct configfs_item_operations pcie_gadget_target_item_ops = {
> + .show_attribute = pcie_gadget_target_attr_show,
> + .store_attribute = pcie_gadget_target_attr_store,
> +};
> +
> +static struct config_item_type pcie_gadget_target_type = {
> + .ct_attrs = pcie_gadget_target_attrs,
> + .ct_item_ops = &pcie_gadget_target_item_ops,
> + .ct_owner = THIS_MODULE,
> +};
> +
> +static void spear13xx_pcie_device_init(struct spear_pcie_gadget_config *config)
> +{
> + struct pcie_app_reg __iomem *app_reg = config->va_app_base;
> +
> + /*setup registers for outbound translation */
> +
> + writel(config->base, &app_reg->in0_mem_addr_start);
> + writel(app_reg->in0_mem_addr_start + IN0_MEM_SIZE,
> + &app_reg->in0_mem_addr_limit);
> + writel(app_reg->in0_mem_addr_limit + 1, &app_reg->in1_mem_addr_start);
> + writel(app_reg->in1_mem_addr_start + IN1_MEM_SIZE,
> + &app_reg->in1_mem_addr_limit);
> + writel(app_reg->in1_mem_addr_limit + 1, &app_reg->in_io_addr_start);
> + writel(app_reg->in_io_addr_start + IN_IO_SIZE,
> + &app_reg->in_io_addr_limit);
> + writel(app_reg->in_io_addr_limit + 1, &app_reg->in_cfg0_addr_start);
> + writel(app_reg->in_cfg0_addr_start + IN_CFG0_SIZE,
> + &app_reg->in_cfg0_addr_limit);
> + writel(app_reg->in_cfg0_addr_limit + 1, &app_reg->in_cfg1_addr_start);
> + writel(app_reg->in_cfg1_addr_start + IN_CFG1_SIZE,
> + &app_reg->in_cfg1_addr_limit);
> + writel(app_reg->in_cfg1_addr_limit + 1, &app_reg->in_msg_addr_start);
> + writel(app_reg->in_msg_addr_start + IN_MSG_SIZE,
> + &app_reg->in_msg_addr_limit);
> +
> + writel(app_reg->in0_mem_addr_start, &app_reg->pom0_mem_addr_start);
> + writel(app_reg->in1_mem_addr_start, &app_reg->pom1_mem_addr_start);
> + writel(app_reg->in_io_addr_start, &app_reg->pom_io_addr_start);
> +
> + /*setup registers for inbound translation */
> +
> + /* Keep AORAM mapped at BAR0 as default */
> + config->bar0_size = INBOUND_ADDR_MASK + 1;
> + spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, INBOUND_ADDR_MASK);
> + spear_dbi_write_reg(config, PCI_BASE_ADDRESS_0, 4, 0xC);
> + config->va_bar0_address = ioremap(SPEAR13XX_SYSRAM1_BASE,
> + config->bar0_size);
> +
> + writel(SPEAR13XX_SYSRAM1_BASE, &app_reg->pim0_mem_addr_start);
> + writel(0, &app_reg->pim1_mem_addr_start);
> + writel(INBOUND_ADDR_MASK + 1, &app_reg->mem0_addr_offset_limit);
> +
> + writel(0x0, &app_reg->pim_io_addr_start);
> + writel(0x0, &app_reg->pim_io_addr_start);
> + writel(0x0, &app_reg->pim_rom_addr_start);
> +
> + writel(DEVICE_TYPE_EP | (1 << MISCTRL_EN_ID)
> + | ((u32)1 << REG_TRANSLATION_ENABLE),
> + &app_reg->app_ctrl_0);
> + /* disable all rx interrupts */
> + writel(0, &app_reg->int_mask);
> +
> + /* Select INTA as default*/
> + spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
> +}
> +
> +static int __devinit spear_pcie_gadget_probe(struct platform_device *pdev)
> +{
> + struct resource *res0, *res1;
> + unsigned int status = 0;
> + int irq;
> + struct clk *clk;
> + static struct pcie_gadget_target *target;
> + struct spear_pcie_gadget_config *config;
> + struct config_item *cg_item;
> + struct configfs_subsystem *subsys;
> +
> + /* get resource for application registers*/
> +
> + res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res0) {
> + dev_err(&pdev->dev, "no resource defined\n");
> + return -EBUSY;
> + }
> + if (!request_mem_region(res0->start, resource_size(res0),
> + pdev->name)) {
> + dev_err(&pdev->dev, "pcie gadget region already claimed\n");
> + return -EBUSY;
> + }
> + /* get resource for dbi registers*/
> +
> + res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> + if (!res1) {
> + dev_err(&pdev->dev, "no resource defined\n");
> + goto err_rel_res0;
> + }
> + if (!request_mem_region(res1->start, resource_size(res1),
> + pdev->name)) {
> + dev_err(&pdev->dev, "pcie gadget region already claimed\n");
> + goto err_rel_res0;
> + }
> +
> + target = kzalloc(sizeof(*target), GFP_KERNEL);
> + if (!target) {
> + dev_err(&pdev->dev, "out of memory\n");
> + status = -ENOMEM;
> + goto err_rel_res;
> + }
> +
> + cg_item = &target->subsys.su_group.cg_item;
> + sprintf(cg_item->ci_namebuf, "pcie_gadget.%d", pdev->id);
> + cg_item->ci_type = &pcie_gadget_target_type;
> + config = &target->config;
> + config->va_app_base = (void __iomem *)ioremap(res0->start,
> + resource_size(res0));
> + if (!config->va_app_base) {
> + dev_err(&pdev->dev, "ioremap fail\n");
> + status = -ENOMEM;
> + goto err_kzalloc;
> + }
> +
> + config->base = (void __iomem *)res1->start;
> +
> + config->va_dbi_base = (void __iomem *)ioremap(res1->start,
> + resource_size(res1));
> + if (!config->va_dbi_base) {
> + dev_err(&pdev->dev, "ioremap fail\n");
> + status = -ENOMEM;
> + goto err_iounmap_app;
> + }
> +
> + dev_set_drvdata(&pdev->dev, target);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0) {
> + dev_err(&pdev->dev, "no update irq?\n");
> + status = irq;
> + goto err_iounmap;
> + }
> +
> + status = request_irq(irq, spear_pcie_gadget_irq, 0, pdev->name, NULL);
> + if (status) {
> + dev_err(&pdev->dev, "pcie gadget interrupt IRQ%d already \
> + claimed\n", irq);
> + goto err_iounmap;
> + }
> +
> + /* Register configfs hooks */
> + subsys = &target->subsys;
> + config_group_init(&subsys->su_group);
> + mutex_init(&subsys->su_mutex);
> + status = configfs_register_subsystem(subsys);
> + if (status)
> + goto err_irq;
> +
> + /*
> + * init basic pcie application registers
> + * do not enable clock if it is PCIE0.Ideally , all controller should
> + * have been independent from others with respect to clock. But PCIE1
> + * and 2 depends on PCIE0.So PCIE0 clk is provided during board init.
> + */
> + if (pdev->id == 1) {
> + /*
> + * Ideally CFG Clock should have been also enabled here. But
> + * it is done currently during board init routne
> + */
> + clk = clk_get_sys("pcie1", NULL);
> + if (IS_ERR(clk)) {
> + pr_err("%s:couldn't get clk for pcie1\n", __func__);
> + goto err_irq;
> + }
> + if (clk_enable(clk)) {
> + pr_err("%s:couldn't enable clk for pcie1\n", __func__);
> + goto err_irq;
> + }
> + } else if (pdev->id == 2) {
> + /*
> + * Ideally CFG Clock should have been also enabled here. But
> + * it is done currently during board init routne
> + */
> + clk = clk_get_sys("pcie2", NULL);
> + if (IS_ERR(clk)) {
> + pr_err("%s:couldn't get clk for pcie2\n", __func__);
> + goto err_irq;
> + }
> + if (clk_enable(clk)) {
> + pr_err("%s:couldn't enable clk for pcie2\n", __func__);
> + goto err_irq;
> + }
> + }
> + spear13xx_pcie_device_init(config);
> +
> + return 0;
> +err_irq:
> + free_irq(irq, NULL);
> +err_iounmap:
> + iounmap(config->va_dbi_base);
> +err_iounmap_app:
> + iounmap(config->va_app_base);
> +err_kzalloc:
> + kfree(config);
> +err_rel_res:
> + release_mem_region(res1->start, resource_size(res1));
> +err_rel_res0:
> + release_mem_region(res0->start, resource_size(res0));
> + return status;
> +}
> +
> +static int __devexit spear_pcie_gadget_remove(struct platform_device *pdev)
> +{
> + struct resource *res0, *res1;
> + static struct pcie_gadget_target *target;
> + struct spear_pcie_gadget_config *config;
> + int irq;
> +
> + res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> + irq = platform_get_irq(pdev, 0);
> + target = dev_get_drvdata(&pdev->dev);
> + config = &target->config;
> +
> + free_irq(irq, NULL);
> + iounmap(config->va_dbi_base);
> + iounmap(config->va_app_base);
> + release_mem_region(res1->start, resource_size(res1));
> + release_mem_region(res0->start, resource_size(res0));
> + configfs_unregister_subsystem(&target->subsys);
> + kfree(target);
> +
> + return 0;
> +}
> +
> +static void spear_pcie_gadget_shutdown(struct platform_device *pdev)
> +{
> +}
> +
> +static struct platform_driver spear_pcie_gadget_driver = {
> + .probe = spear_pcie_gadget_probe,
> + .remove = spear_pcie_gadget_remove,
> + .shutdown = spear_pcie_gadget_shutdown,
> + .driver = {
> + .name = "pcie-gadget-spear",
> + .bus = &platform_bus_type
> + },
> +};
> +
> +static int __init spear_pcie_gadget_init(void)
> +{
> + return platform_driver_register(&spear_pcie_gadget_driver);
> +}
> +module_init(spear_pcie_gadget_init);
> +
> +static void __exit spear_pcie_gadget_exit(void)
> +{
> + platform_driver_unregister(&spear_pcie_gadget_driver);
> +}
> +module_exit(spear_pcie_gadget_exit);
> +
> +MODULE_ALIAS("pcie-gadget-spear");
> +MODULE_AUTHOR("Pratyush Anand");
> +MODULE_LICENSE("GPL");
> --
> 1.6.0.2
>
> .
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists