| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <201102222336.48506.linux@rainbow-software.org>
Date: Tue, 22 Feb 2011 23:36:45 +0100
From: Ondrej Zary <linux@...nbow-software.org>
To: Ondrej Zajicek <santiago@...reenet.org>
Cc: linux-fbdev@...r.kernel.org,
Kernel development list <linux-kernel@...r.kernel.org>,
David Miller <davem@...emloft.net>
Subject: [PATCH] s3fb: fix 15/16bpp modes with over 115MHz pixclocks on 86C365 Trio3D
Enable pixel multiplexing in 15/16bpp modes when pixclock is over 115MHz
on Trio3D (86C365) cards to fix artifacts on the left side of screen.
Signed-off-by: Ondrej Zary <linux@...nbow-software.org>
--- linux-2.6.38-rc4-/drivers/video/s3fb.c 2011-02-20 20:48:41.000000000 +0100
+++ linux-2.6.38-rc4/drivers/video/s3fb.c 2011-02-22 23:31:16.000000000 +0100
@@ -675,6 +675,15 @@
svga_wcrt_mask(par->state.vgabase, 0x67, 0x20, 0xF0);
else
svga_wcrt_mask(par->state.vgabase, 0x67, 0x30, 0xF0);
+ } else if (par->chip == CHIP_365_TRIO3D) {
+ svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
+ if (info->var.pixclock > 8695) {
+ svga_wcrt_mask(par->state.vgabase, 0x67, 0x30, 0xF0);
+ hmul = 2;
+ } else {
+ svga_wcrt_mask(par->state.vgabase, 0x67, 0x20, 0xF0);
+ multiplex = 1;
+ }
} else {
svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
svga_wcrt_mask(par->state.vgabase, 0x67, 0x30, 0xF0);
@@ -691,6 +700,15 @@
svga_wcrt_mask(par->state.vgabase, 0x67, 0x40, 0xF0);
else
svga_wcrt_mask(par->state.vgabase, 0x67, 0x50, 0xF0);
+ } else if (par->chip == CHIP_365_TRIO3D) {
+ svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
+ if (info->var.pixclock > 8695) {
+ svga_wcrt_mask(par->state.vgabase, 0x67, 0x50, 0xF0);
+ hmul = 2;
+ } else {
+ svga_wcrt_mask(par->state.vgabase, 0x67, 0x40, 0xF0);
+ multiplex = 1;
+ }
} else {
svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
svga_wcrt_mask(par->state.vgabase, 0x67, 0x50, 0xF0);
--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists