[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <B85A65D85D7EB246BE421B3FB0FBB593024BE49816@dbde02.ent.ti.com>
Date: Thu, 24 Feb 2011 19:26:28 +0530
From: "TK, Pratheesh Gangadhar" <pratheesh@...com>
To: "Hans J. Koch" <hjk@...sjkoch.de>
CC: "davinci-linux-open-source@...ux.davincidsp.com"
<davinci-linux-open-source@...ux.davincidsp.com>,
"gregkh@...e.de" <gregkh@...e.de>,
"Chatterjee, Amit" <amit.chatterjee@...com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: RE: [PATCH v3 1/2] PRUSS UIO driver support
> -----Original Message-----
> From: Hans J. Koch [mailto:hjk@...sjkoch.de]
> Sent: Wednesday, February 23, 2011 11:07 PM
> To: TK, Pratheesh Gangadhar
> Cc: davinci-linux-open-source@...ux.davincidsp.com; hjk@...sjkoch.de;
> gregkh@...e.de; Chatterjee, Amit; linux-kernel@...r.kernel.org; linux-arm-
> kernel@...ts.infradead.org
> Subject: Re: [PATCH v3 1/2] PRUSS UIO driver support
>
> On Wed, Feb 23, 2011 at 07:22:40PM +0530, Pratheesh Gangadhar wrote:
> > This patch implements PRUSS (Programmable Real-time Unit Sub System)
> > UIO driver which exports SOC resources associated with PRUSS like
> > I/O, memories and IRQs to user space. PRUSS is dual 32-bit RISC
> > processors which is efficient in performing embedded tasks that
> > require manipulation of packed memory mapped data structures and
> > efficient in handling system events that have tight real time
> > constraints. This driver is currently supported on Texas Instruments
> > DA850, AM18xx and OMAPL1-38 devices.
> > For example, PRUSS runs firmware for real-time critical industrial
> > communication data link layer and communicates with application stack
> > running in user space via shared memory and IRQs.
> >
> > Signed-off-by: Pratheesh Gangadhar <pratheesh@...com>
> > ---
> > drivers/uio/Kconfig | 17 ++++
> > drivers/uio/Makefile | 1 +
> > drivers/uio/uio_pruss.c | 223
> +++++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 241 insertions(+), 0 deletions(-)
> > create mode 100644 drivers/uio/uio_pruss.c
> >
>
> [...]
>
> > +
> > +static int __devinit pruss_probe(struct platform_device *dev)
> > +{
> > + int ret = -ENODEV, count = 0;
> > + struct resource *regs_prussio, *regs_l3ram, *regs_ddr;
> > + struct uio_info *p;
> > +
> > + info = kzalloc(sizeof(struct uio_info) * MAX_PRUSS_EVTOUT_INSTANCE,
> > + GFP_KERNEL);
> > + if (!info)
> > + return -ENOMEM;
> > +
> > + /* Power on PRU in case its not done as part of boot-loader */
> > + pruss_clk = clk_get(&dev->dev, "pruss");
> > + if (IS_ERR(pruss_clk)) {
> > + dev_err(&dev->dev, "Failed to get clock\n");
> > + ret = PTR_ERR(pruss_clk);
> > + return ret;
>
> You leak memory here. What about freeing "info"?
Ok. Will fix.
Thanks,
Pratheesh
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists