| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1298600118.3238.10.camel@jonz-ubuntu>
Date: Thu, 24 Feb 2011 20:15:18 -0600
From: Jon Brenner <jbrenner@...sinc.com>
To: akpm@...ux-foundation.org
Cc: linux-kernel@...r.kernel.org
Subject: [PATCH: 2.6.37 1/1] TAOS 258x: Device Driver
From: J. August Brenner <jbrenner@...sinc.com>
This driver supports the TAOS tsl258x family of ALS sensors.
This driver provides ALS data (lux), and device configuration via ioctl,
input_event, sysfs/iio methods. These methods are provided to support
varied access requirements and integrated into a single driver.
Thus, adverting the need for multiple releases of similar code.
More significantly, this driver provides the capability to be fed 'glass
coefficients' to accommodate varying system designs (bezels, faceplates,
etc.).
Signed-off-by: Jon August Brenner <jbrenner@...sinc.com>
---
diff -Naurp drivers-orig/Kconfig drivers/Kconfig
--- drivers-orig/Kconfig 2011-01-04 18:50:19.000000000 -0600
+++ drivers/Kconfig 2011-02-24 16:03:53.536188000 -0600
@@ -13,6 +13,13 @@ config SENSORS_TSL2563
This driver can also be built as a module. If so, the module
will be called tsl2563.
+config TAOS_258x
+ tristate "TAOS TSL258x device driver"
+ default m
+ help
+ Provides support for the TAOS tsl258x family of devices.
+ Access ALS data via iio, sysfs, input_event, and ioctl methods.
+
config SENSORS_ISL29018
tristate "ISL 29018 light and proximity sensor"
depends on I2C
diff -Naurp drivers-orig/Makefile drivers/Makefile
--- drivers-orig/Makefile 2011-01-04 18:50:19.000000000 -0600
+++ drivers/Makefile 2011-02-24 16:04:31.701642000 -0600
@@ -3,4 +3,5 @@
#
obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
+obj-$(CONFIG_TAOS_258x) += tsl258x.o
obj-$(CONFIG_SENSORS_ISL29018) += isl29018.o
diff -Naurp drivers-orig/tsl258x.c drivers/tsl258x.c
--- drivers-orig/tsl258x.c 1969-12-31 18:00:00.000000000 -0600
+++ drivers/tsl258x.c 2011-02-24 14:07:43.416960000 -0600
@@ -0,0 +1,2055 @@
+/*
+ * Device driver for monitoring ambient light intensity (lux)
+ * within the TAOS tsl258x family of devices
+ *
+ * Copyright (c) 2011, TAOS Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+#include <linux/wait.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/timer.h>
+#include <linux/uaccess.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/proc_fs.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/firmware.h>
+#include <linux/string.h>
+#include <linux/kmod.h>
+#include <linux/ctype.h>
+#include <linux/input.h>
+#include <linux/time.h>
+#include <linux/jiffies.h>
+#include "../iio.h"
+
+/*........................................................................*/
+#define DRIVER_VERSION_ID "3.9"
+
+#define TAOS258x 2
+
+/* This build will be for..*/
+#define DRIVER_TYPE TAOS258x
+
+/*........................................................................*/
+/*Debug related*/
+#define TAOS_DEBUG 1
+/*#define TAOS_DEBUG_SMBUS 1 */
+#define TAOS_IRQ_DEBUG 1
+/*........................................................................*/
+/*User notification method*/
+/*#define ASYNC_NOTIFY 1 */
+#define EVENT_NOTIFY 1
+/*........................................................................*/
+/*Module defines*/
+/* Device name/id/address */
+#define DEVICE_NAME "taos"
+#ifdef TAOS258x
+#define DEVICE_ID "skateFN"
+#else
+#define DEVICE_ID "tritonFN"
+#endif
+
+#define ID_NAME_SIZE 10
+#define DEVICE_ADDR1 0x29
+#define DEVICE_ADDR2 0x39
+#define DEVICE_ADDR3 0x49
+#define MAX_NUM_DEVICES 3
+#define MAX_DEVICE_REGS 32
+#define I2C_MAX_ADAPTERS 8
+
+/* Triton register offsets */
+#ifdef TAOS258x
+#define TAOS_REG_MAX 8
+#else
+#define TAOS_REG_MAX 16
+#endif
+
+/* Power management */
+#define taos_suspend NULL
+#define taos_shutdown NULL
+#define taos_resume NULL
+
+#define TRUE 1
+#define FALSE 0
+
+#define MAXI2C 32
+#define CMD_ADDRESS 0x80
+#define TAOS_ERROR -1
+#define TAOS_SUCCESS 0
+
+#define MAX_SAMPLES_CAL 200
+
+#define LUX_UPDATE_PERIOD (HZ/2)
+
+/* power control */
+#define ON 1
+#define OFF 0
+
+
+/* sensor type */
+#define LIGHT 1
+#define PROXIMITY 2
+#define ALL 3
+
+struct taos_als_info {
+ u16 als_ch0;
+ u16 als_ch1;
+ u16 lux;
+};
+
+struct taos_settings {
+ int als_time;
+ int als_gain;
+ int als_gain_trim;
+ int als_cal_target;
+ int interrupts_enabled;
+ int als_thresh_low;
+ int als_thresh_high;
+ char als_persistence;
+};
+
+/* ioctl numbers */
+#define TAOS_IOCTL_MAGIC 0XCF
+#define TAOS_IOCTL_ALS_ON _IO(TAOS_IOCTL_MAGIC, 1)
+#define TAOS_IOCTL_ALS_OFF _IO(TAOS_IOCTL_MAGIC, 2)
+#define TAOS_IOCTL_ALS_DATA _IOR(TAOS_IOCTL_MAGIC, 3, short)
+#define TAOS_IOCTL_ALS_CALIBRATE _IO(TAOS_IOCTL_MAGIC, 4)
+#define TAOS_IOCTL_CONFIG_GET _IOR(TAOS_IOCTL_MAGIC, 5,\
+ struct taos_settings)
+#define TAOS_IOCTL_CONFIG_SET _IOW(TAOS_IOCTL_MAGIC, 6, \
+ struct taos_settings)
+#define TAOS_IOCTL_LUX_TABLE_GET _IOR(TAOS_IOCTL_MAGIC, 7, \
+ struct taos_lux)
+#define TAOS_IOCTL_LUX_TABLE_SET _IOW(TAOS_IOCTL_MAGIC, 8, \
+ struct taos_lux)
+#define TAOS_IOCTL_ID _IOR(TAOS_IOCTL_MAGIC, 12, char*)
+#define TAOS_IOCTL_SET_GAIN _IOW(TAOS_IOCTL_MAGIC, 15, int)
+#define TAOS_IOCTL_GET_ALS _IOR(TAOS_IOCTL_MAGIC, 16, \
+ struct taos_als_info)
+#define TAOS_IOCTL_INT_SET _IOW(TAOS_IOCTL_MAGIC, 17, int)
+
+/*Device Registers and Masks*/
+#define CNTRL 0x00
+#define STATUS 0x00
+#define ALS_TIME 0X01
+#define INTERRUPT 0x02
+#define ALS_MINTHRESHLO 0X03
+#define ALS_MINTHRESHHI 0X04
+#define ALS_MAXTHRESHLO 0X05
+#define ALS_MAXTHRESHHI 0X06
+#define GAIN 0x07
+#define REVID 0x11
+#define CHIPID 0x12
+#define SMB_4 0x13
+#define ALS_CHAN0LO 0x14
+#define ALS_CHAN0HI 0x15
+#define ALS_CHAN1LO 0x16
+#define ALS_CHAN1HI 0x17
+#define TMR_LO 0x18
+#define TMR_HI 0x19
+
+/* Skate cmd reg masks */
+#define CMD_REG 0x80
+#define CMD_BYTE_RW 0x00
+#define CMD_WORD_BLK_RW 0x20
+#define CMD_SPL_FN 0x60
+#define CMD_ALS_INTCLR 0X01
+
+/* Skate cntrl reg masks */
+#define CNTL_REG_CLEAR 0x00
+#define CNTL_ALS_INT_ENBL 0x10
+#define CNTL_WAIT_TMR_ENBL 0x08
+#define CNTL_ADC_ENBL 0x02
+#define CNTL_PWRON 0x01
+#define CNTL_ALSPON_ENBL 0x03
+#define CNTL_INTALSPON_ENBL 0x13
+
+/* Skate status reg masks */
+#define STA_ADCVALID 0x01
+#define STA_ALSINTR 0x10
+#define STA_ADCINTR 0x10
+
+/* Lux constants */
+#define MAX_LUX 65535
+
+/* Thresholds */
+#define ALS_THRESHOLD_LO_LIMIT 0x0010
+#define ALS_THRESHOLD_HI_LIMIT 0xFFFF
+
+/* Device default configuration */
+#define ALS_TIME_PARAM 100
+#define SCALE_FACTOR_PARAM 1
+#define GAIN_TRIM_PARAM 512
+#define GAIN_PARAM 1
+#define ALS_THRSH_HI_PARAM 0xFFFF
+#define ALS_THRSH_LO_PARAM 0
+
+
+/* Prototypes */
+static void taos_defaults(void);
+static int taos_chip_on(void);
+static int taos_chip_off(void);
+static int taos_get_lux(void);
+
+struct i2c_adapter *i2c_get_adapter(int id);
+
+static int taos_probe(struct i2c_client *clientp,
+ const struct i2c_device_id *idp);
+static int taos_remove(struct i2c_client *client);
+static int taos_open(struct inode *inode, struct file *file);
+static int taos_release(struct inode *inode, struct file *file);
+static int taos_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+ unsigned long arg);
+static int taos_read(struct file *file, char *buf, size_t count, loff_t *ppos);
+static int taos_write(struct file *file, const char *buf, size_t count,
+ loff_t *ppos);
+static loff_t taos_llseek(struct file *file, loff_t offset, int orig);
+static int taos_fasync(int fd, struct file *file, int mode);
+static int taos_device_name(unsigned char *bufp, char **device_name);
+static int taos_als_calibrate(unsigned long als_cal_target);
+static void taos_als_auto_update(struct work_struct *update);
+
+/*........................................................................*/
+/* Various /misc. emun*/
+enum {
+ TAOS_CHIP_UNKNOWN = 0, TAOS_CHIP_WORKING = 1, TAOS_CHIP_SLEEP = 2
+} TAOS_CHIP_WORKING_STATUS;
+
+/*........................................................................*/
+
+char driver_version_id[] = DRIVER_VERSION_ID;
+
+/*........................................................................*/
+
+/* First device number */
+static dev_t taos_dev_number;
+
+/* Class structure for this device */
+static struct class *taos_class;
+
+/* Module device table */
+static struct i2c_device_id taos_idtable[] = {
+ { DEVICE_ID, 0 },
+ { } };
+MODULE_DEVICE_TABLE(i2c, taos_idtable);
+
+/* Board and address info */
+static struct i2c_board_info taos_board_info[] = {
+ { I2C_BOARD_INFO(DEVICE_ID, DEVICE_ADDR1), },
+ { I2C_BOARD_INFO(DEVICE_ID, DEVICE_ADDR2), },
+ { I2C_BOARD_INFO(DEVICE_ID, DEVICE_ADDR3), }, };
+
+static unsigned short const taos_addr_list[4] = {
+ DEVICE_ADDR1,
+ DEVICE_ADDR2,
+ DEVICE_ADDR3,
+ I2C_CLIENT_END };
+
+/* Client and device */
+static struct i2c_client *client;
+static struct device *devp;
+static struct i2c_client *bad_clientp[MAX_NUM_DEVICES];
+static int device_found;
+
+/* Driver definition */
+static struct i2c_driver taos_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DEVICE_NAME, },
+ .id_table = taos_idtable,
+ .probe = taos_probe,
+ .remove = __devexit_p(taos_remove),
+ .suspend = taos_suspend,
+ .shutdown = taos_shutdown,
+ .resume = taos_resume, };
+
+/* Per-device data */
+static struct tsl258x_chip {
+ struct i2c_client *client;
+ struct iio_dev *iio_dev;
+ struct delayed_work update_lux;
+ struct work_struct work_thresh;
+ s64 event_timestamp;
+ struct cdev cdev;
+ struct fasync_struct *async_queue;
+ unsigned int addr;
+ char taos_id;
+ char taos_name[ID_NAME_SIZE];
+ char valid;
+ unsigned long last_updated;
+
+} *chip;
+
+/* File operations */
+static const struct file_operations taos_fops = {
+ .owner = THIS_MODULE,
+ .open = taos_open,
+ .release = taos_release,
+ .read = taos_read,
+ .write = taos_write,
+ .llseek = taos_llseek,
+ .fasync = taos_fasync,
+ .ioctl = taos_ioctl, };
+
+/* ................ Als info ..................*/
+struct taos_als_info als_cur_info;
+EXPORT_SYMBOL(als_cur_info);
+
+/*Next two vars are also used to determine irq type - in lieu status info*/
+bool als_on = FALSE;
+
+static int device_released = 0x0000;
+static unsigned int irqnum = 0x0000;
+static DECLARE_WAIT_QUEUE_HEAD(taos_int_wait);
+
+/* Lux time scale */
+struct time_scale_factor {
+ unsigned int numerator;
+ unsigned int denominator;
+ unsigned int saturation;
+};
+
+/* ------ Mutex ------*/
+DEFINE_MUTEX(als_mutex);
+
+/*Structs & vars*/
+int taos_chip_status = TAOS_CHIP_UNKNOWN; /*Unknown = uninitialized to start*/
+int taos_cycle_type; /* what is the type of cycle being run: ALS, PROX, or BOTH
+ */
+struct taos_settings taos_settings;
+EXPORT_SYMBOL(taos_settings);
+
+/* Device configuration */
+#define MAX_SETTING_MEMBERS 6
+static struct taos_settings *taos_settingsP; /*Pointer Needed for ioctl(s)*/
+
+/*More Prototypes*/
+static int taos_i2c_read(u8 reg, u8 *val, unsigned int len);
+static int taos_i2c_write(u8 reg, u8 *val);
+static int taos_i2c_write_command(u8 reg);
+
+/* Work Queues used for bottom halves of self poll/push & IRQs */
+static struct workqueue_struct *taos_wq0;
+
+struct delayed_work *luxUd;
+/*........................................................................*/
+/*
+ Initial values for device - this values can/will be changed by driver.
+ and applications as needed.
+ These values are dynamic.
+ */
+u8 taos_config[8] = { 0x00, 0xee, 0x00, 0x03, 0x00, 0xFF, 0xFF, 0x00 };
+/* cntrl atime intC Athl0 Athl1 Athh0 Athh1 gain*/
+
+/*
+ This structure is intentionally large to accommodate updates via
+ ioctl and proc input methods.
+ */
+struct taos_lux {
+ unsigned int ratio;
+ unsigned int ch0;
+ unsigned int ch1;
+} taos_device_lux[] = {
+ { 9830, 8520, 15729 },
+ { 12452, 10807, 23344 },
+ {14746, 6383, 11705 },
+ { 17695, 4063, 6554 },
+ { 0, 0, 0 },
+ { 0, 0, 0 },
+ { 0, 0, 0 },
+ { 0, 0, 0 },
+ { 0, 0, 0 },
+ { 0, 0, 0 },
+ { 0, 0, 0 } };
+
+struct taos_lux taos_lux;
+EXPORT_SYMBOL(taos_lux);
+
+int als_time_scale; /*computed, ratios lux due to als integration time*/
+int als_saturation; /*computed, set to 90% of full scale of als integration*/
+
+/*Index = (0 - 3) Used to validate the gain selection index*/
+#define MAX_GAIN_STAGES 4
+struct gainadj {
+ s16 ch0;
+ s16 ch1;
+} gainadj[] = {
+ { 1, 1 },
+ { 8, 8 },
+ { 16, 16 },
+ { 107, 115 } };
+
+struct taos_lux *taos_device_luxP;
+
+/*Input_dev*/
+static struct input_dev *taos_dev;
+
+/*sysfs - interface functions*/
+static ssize_t taos_device_id(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static DEVICE_ATTR(device_id, S_IRUGO, taos_device_id, NULL);
+
+static ssize_t taos_power_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t taos_power_state_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len);
+static DEVICE_ATTR(device_state, S_IRUGO | S_IWUSR,
+ taos_power_state_show,
+ taos_power_state_store);
+
+static ssize_t taos_gain_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t taos_gain_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len);
+static DEVICE_ATTR(als_gain, S_IRUGO | S_IWUSR,
+ taos_gain_show,
+ taos_gain_store);
+
+static ssize_t taos_interrupt_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t taos_interrupt_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len);
+static DEVICE_ATTR(als_interrupt, S_IRUGO | S_IWUSR,
+ taos_interrupt_show,
+ taos_interrupt_store);
+
+static ssize_t taos_als_time_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t taos_als_time_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len);
+static DEVICE_ATTR(als_time, S_IRUGO | S_IWUSR,
+ taos_als_time_show,
+ taos_als_time_store);
+
+static ssize_t taos_als_trim_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t taos_als_trim_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len);
+static DEVICE_ATTR(als_trim, S_IRUGO | S_IWUSR,
+ taos_als_trim_show,
+ taos_als_trim_store);
+
+static ssize_t taos_als_persistence_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t taos_als_persistence_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len);
+static DEVICE_ATTR(als_persistence, S_IRUGO | S_IWUSR,
+ taos_als_persistence_show,
+ taos_als_persistence_store);
+
+static ssize_t taos_als_cal_target_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t taos_als_cal_target_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len);
+static DEVICE_ATTR(als_target, S_IRUGO | S_IWUSR,
+ taos_als_cal_target_show,
+ taos_als_cal_target_store);
+
+static ssize_t taos_lux_show(struct device *dev, struct device_attribute *attr,
+ char *buf);
+static DEVICE_ATTR(lux, S_IRUGO, taos_lux_show, NULL);
+
+static ssize_t taos_do_calibrate(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len);
+static DEVICE_ATTR(calibrate, S_IWUSR, NULL, taos_do_calibrate);
+
+static ssize_t taos_als_thresh_low_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t taos_als_thresh_low_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len);
+static DEVICE_ATTR(als_lowT, S_IRUGO | S_IWUSR,
+ taos_als_thresh_low_show,
+ taos_als_thresh_low_store);
+
+static ssize_t taos_als_thresh_high_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t taos_als_thresh_high_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len);
+static DEVICE_ATTR(als_highT, S_IRUGO | S_IWUSR,
+ taos_als_thresh_high_show,
+ taos_als_thresh_high_store);
+
+
+static struct attribute *sysfs_attrs_ctrl[] = {
+ &dev_attr_device_id.attr,
+ &dev_attr_device_state.attr,
+ &dev_attr_als_gain.attr,
+ &dev_attr_als_interrupt.attr,
+ &dev_attr_als_time.attr,
+ &dev_attr_als_trim.attr,
+ &dev_attr_als_persistence.attr,
+ &dev_attr_als_target.attr,
+ &dev_attr_lux.attr,
+ &dev_attr_calibrate.attr,
+ &dev_attr_als_lowT.attr,
+ &dev_attr_als_highT.attr,
+ NULL };
+
+static struct attribute_group tsl258x_attribute_group[] = {
+ { .attrs = sysfs_attrs_ctrl }, };
+
+
+/*===========================================================================*/
+/*
+
+ FUNCTIONS BEGIN HERE
+
+ */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/**@...group Initialization Driver Initialization
+ * The sections applies to functions for driver initialization, instantiation,
+ * _exit, \n
+ * and user-land application invoking (ie. open).\n
+ * Also included in this section is the initial interrupt handler (handler
+ * bottom halves are in the respective
+ * sections).
+ * @{
+ */
+
+/*........................................................................*/
+/** Driver initialization - device probe is initiated here, to identify
+ * a valid device if present on any of the i2c buses and at any address.
+ * \param none
+ * \return: int (0 = OK)
+ * \note H/W Interrupt are device/product dependent.
+ * Attention is required to the definition and configuration.
+ */
+/*........................................................................*/
+static int __init taos_init(void)
+{
+ u32 err;
+ int i, j, k, ret = 0;
+ struct i2c_adapter *my_adap;
+ static int num_bad = 0x0000;
+
+#ifdef TAOS_DEBUG
+ printk(KERN_ERR "Loading TAOS Driver\n");
+ printk(KERN_INFO "\nRequesting a GPIO for irq\n");
+#endif
+/*......................................................................*/
+ /*Create the work queue and allocate kernel memory for the
+ * scheduled workers*/
+ taos_wq0 = create_workqueue("taos_work_queue");
+ if (taos_wq0)
+ luxUd = kmalloc(sizeof(struct delayed_work), GFP_KERNEL);
+
+ /*Make sure we have what we need */
+ if ((!taos_wq0) || (!luxUd))
+ return -ENOMEM;
+
+/*.....................................................................*/
+ ret = alloc_chrdev_region(&taos_dev_number, 0, MAX_NUM_DEVICES,
+ DEVICE_NAME);
+ if (ret < 0) {
+ dev_err(devp, "taos_device_drvr: alloc_chrdev_region()"
+ "failed in taos_init()\n");
+ return ret;
+ }
+ taos_class = class_create(THIS_MODULE, DEVICE_NAME);
+ chip = kmalloc(sizeof(struct tsl258x_chip), GFP_KERNEL);
+ if (!chip) {
+ dev_err(devp, "taos_device_drvr: kmalloc for "
+ "struct tsl258x_chip failed in taos_init()\n");
+ ret = -ENOMEM;
+ goto exit_3;
+ }
+ memset(chip, 0, sizeof(struct tsl258x_chip));
+ cdev_init(&chip->cdev, &taos_fops);
+ chip->cdev.owner = THIS_MODULE;
+
+ ret = cdev_add(&chip->cdev, taos_dev_number, 1);
+ if (ret < 0) {
+ dev_err(devp, "taos_device_drvr: cdev_add() failed in "
+ "taos_init()\n");
+ goto exit_2;
+ }
+ device_create(taos_class, NULL, MKDEV(MAJOR(taos_dev_number), 0),
+ &taos_driver , DEVICE_NAME);
+ ret = i2c_add_driver(&taos_driver);
+ if (ret < 0) {
+ dev_err(devp, "taos_device_drvr: i2c_add_driver() failed in "
+ "taos_init()\n");
+ goto exit_1;
+ }
+ device_found = 0;
+ for (i = 0; i < I2C_MAX_ADAPTERS; i++) {
+ my_adap = i2c_get_adapter(i);
+ if (my_adap == NULL)
+ break;
+ for (j = 0; j < MAX_NUM_DEVICES; j++) {
+ client = i2c_new_probed_device(my_adap,
+ &taos_board_info[j], taos_addr_list);
+ if ((client) && (!device_found)) {
+ bad_clientp[num_bad] = client;
+ num_bad++;
+ }
+ if (device_found)
+ break;
+ }
+ if (num_bad) {
+ for (k = 0; k < num_bad; k++)
+ i2c_unregister_device(bad_clientp[k]);
+ num_bad = 0;
+ }
+ if (device_found)
+ break;
+ }
+ if (device_found) {
+ devp = &client->dev;
+ goto exit_4;
+ } else {
+ if (client)
+ i2c_unregister_device(client);
+ i2c_del_driver(&taos_driver);
+ device_destroy(taos_class, MKDEV(MAJOR(taos_dev_number), 0));
+ cdev_del(&chip->cdev);
+ kfree(chip);
+ class_destroy(taos_class);
+ unregister_chrdev_region(taos_dev_number, MAX_NUM_DEVICES);
+ printk(KERN_ERR "taos_device_drvr: taos_init() found no device\n");
+ return -ENODEV;
+ }
+
+exit_1: device_destroy(taos_class, MKDEV(MAJOR(taos_dev_number), 0));
+exit_2: cdev_del(&chip->cdev);
+ kfree(chip);
+exit_3: class_destroy(taos_class);
+ unregister_chrdev_region(taos_dev_number, MAX_NUM_DEVICES);
+
+exit_4:
+
+ printk(KERN_INFO "\n\nallocating iio device\n");
+ chip->iio_dev = iio_allocate_device();
+ if (!chip->iio_dev)
+ printk(KERN_INFO "iio allocation failed\n");
+
+ chip->iio_dev->attrs =
+ (struct attribute_group *)&tsl258x_attribute_group;
+ chip->iio_dev->dev.parent = &client->dev;
+ chip->iio_dev->dev_data = (void *)(chip);
+ chip->iio_dev->driver_module = THIS_MODULE;
+ chip->iio_dev->modes = INDIO_DIRECT_MODE;
+ err = iio_device_register(chip->iio_dev);
+
+ if (err)
+ printk(KERN_INFO "iio registration failed\n");
+
+ /*Make sure the chip is off*/
+ taos_chip_off();
+ /*Load up the V2 defaults (these are hard coded defaults for now)*/
+ taos_defaults();
+ /*Set any other defaults that are needed to initialize
+ * (such as taos_cycle_type).
+ Note: these settings can/will be changed based on user requirements.*/
+ taos_cycle_type = LIGHT;
+ /*Initialize the work queues*/
+
+ INIT_DELAYED_WORK(luxUd, taos_als_auto_update);
+
+ /*...................................................................*/
+ /*This section populates the input structure and registers the device*/
+#ifdef EVENT_NOTIFY
+ taos_dev = input_allocate_device();
+ if (!taos_dev) {
+ printk(KERN_ERR "__init: Not enough memory for input_dev\n");
+ return ret;
+ }
+
+ /*Since we now have the struct, populate.*/
+ taos_dev->name = DEVICE_ID;
+ taos_dev->id.bustype = BUS_I2C;
+ taos_dev->id.vendor = 0x0089;
+ taos_dev->id.product = 0x2581;
+ taos_dev->id.version = 3;
+ taos_dev->phys = "/dev/taos";
+
+ /*This device one value (LUX)
+ Other devices may have LUX and PROX.
+ Thus we use the ABS_X so ABS_Y is logically available.*/
+ set_bit(EV_ABS, taos_dev->evbit);
+ set_bit(ABS_X, taos_dev->absbit);
+
+ /*Only returns only positive LUX values
+ No noise filter, no flat level*/
+ taos_dev->absmin[ABS_X] = 0;
+ taos_dev->absmax[ABS_X] = MAX_LUX;
+ taos_dev->absfuzz[ABS_X] = 0;
+ taos_dev->absflat[ABS_X] = 0;
+
+ /*And register..*/
+ ret = input_register_device(taos_dev);
+ if (ret) {
+ printk(KERN_ERR "button.c: Failed to register input_dev\n");
+ goto err_free_dev;
+ }
+#endif /*End of input_event*/
+
+
+ /*invoke sysfs
+ invoke iio subsystem*/
+
+ err = sysfs_create_group(&chip->client->dev.kobj,
+ tsl258x_attribute_group);
+ if (err < 0) {
+ dev_err(&chip->client->dev, "Sysfs registration failed\n");
+ goto err_free_dev;
+ }
+
+ if (taos_wq0)
+ ret = queue_delayed_work(taos_wq0, luxUd, LUX_UPDATE_PERIOD);
+ else
+ printk(KERN_INFO "\nNO taos_wq0 for luxUd\n\n");
+
+ return ret; /*Normal return*/
+
+/*In the event we had a problem REGISTERING the device for input_events*/
+err_free_dev:
+ input_free_device(taos_dev);
+ return ret;
+}
+
+/**
+ * Driver exit
+ */
+static void __exit taos_exit(void)
+{
+ printk(KERN_INFO "TAOS driver __exit\n");
+
+ if (taos_wq0) {
+ flush_workqueue(taos_wq0);
+ destroy_workqueue(taos_wq0);
+ }
+
+ input_free_device(taos_dev);
+
+ if (client)
+ i2c_unregister_device(client);
+ i2c_del_driver(&taos_driver);
+ device_destroy(taos_class, MKDEV(MAJOR(taos_dev_number), 0));
+ cdev_del(&chip->cdev);
+ kfree(chip);
+ class_destroy(taos_class);
+ unregister_chrdev_region(taos_dev_number, MAX_NUM_DEVICES);
+
+}
+
+/**
+ * Client probe function - When a valid device is found, the driver's device
+ * data structure is updated, and initialization completes successfully.
+ */
+static int taos_probe(struct i2c_client *clientp,
+ const struct i2c_device_id *idp) {
+ int i, ret = 0;
+ unsigned char buf[MAX_DEVICE_REGS];
+ char *device_name;
+
+ if (device_found)
+ return -ENODEV;
+ if (!i2c_check_functionality(clientp->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&clientp->dev,
+ "taos_probe() - i2c smbus byte data "
+ "functions unsupported\n");
+ return -EOPNOTSUPP;
+ }
+ if (!i2c_check_functionality(clientp->adapter,
+ I2C_FUNC_SMBUS_WORD_DATA)) {
+ dev_warn(&clientp->dev,
+ "taos_probe() - i2c smbus word data "
+ "functions unsupported\n");
+ }
+ if (!i2c_check_functionality(clientp->adapter,
+ I2C_FUNC_SMBUS_BLOCK_DATA)) {
+ dev_err(&clientp->dev,
+ "taos_probe() - i2c smbus block data "
+ "functions unsupported\n");
+ }
+ chip->client = clientp;
+ i2c_set_clientdata(clientp, chip);
+ for (i = 0; i < MAX_DEVICE_REGS; i++) {
+ ret = i2c_smbus_write_byte(clientp, (CMD_REG | (CNTRL + i)));
+ if (ret < 0) {
+ dev_err(&clientp->dev, "i2c_smbus_write_byte() to cmd "
+ "reg failed in taos_probe(), err = %d\n", ret);
+ return ret;
+ }
+ buf[i] = i2c_smbus_read_byte(clientp);
+ }
+ ret = taos_device_name(buf, &device_name);
+ if (ret < 0) {
+ dev_info(&clientp->dev, "i2c device found - does not match "
+ "expected id in taos_probe() 1\n");
+ }
+ if (strcmp(device_name, DEVICE_ID)) {
+ dev_info(&clientp->dev, "i2c device found - does not match "
+ "expected id in taos_probe()2\n");
+ } else {
+ dev_info(&clientp->dev, "i2c device found - matches expected "
+ "id of %s in taos_probe()\n", device_name);
+ device_found = 1;
+ }
+ ret = i2c_smbus_write_byte(clientp, (CMD_REG | CNTRL));
+ if (ret < 0) {
+ dev_err(&clientp->dev, "i2c_smbus_write_byte() to cmd reg "
+ "failed in taos_probe(), err = %d\n", ret);
+ return ret;
+ }
+ strlcpy(clientp->name, DEVICE_ID, I2C_NAME_SIZE);
+ strlcpy(chip->taos_name, DEVICE_ID, ID_NAME_SIZE);
+ chip->valid = 0;
+
+ taos_settingsP = kmalloc(sizeof(struct taos_settings), GFP_KERNEL);
+ if (!(taos_settingsP)) {
+ dev_err(&clientp->dev,
+ "kmalloc for struct taos_settings failed in taos_probe()\n");
+ return -ENOMEM;
+ }
+
+ return ret;
+}
+
+/**
+ * Client remove
+ */
+static int __devexit taos_remove(struct i2c_client *client)
+{
+ return 0;
+}
+
+/**
+ * Device open function
+ */
+static int taos_open(struct inode *inode, struct file *file)
+{
+ int ret = 0;
+ struct tsl258x_chip *chip;
+
+
+ /*For debug - Make it ez to c on the console*/
+#ifdef TAOS_DEBUG
+ printk(KERN_INFO "***************************************************\n");
+ printk(KERN_INFO "* *\n");
+ printk(KERN_INFO "* TAOS DEVICE *\n");
+ printk(KERN_INFO "* DRIVER *\n");
+ printk(KERN_INFO "* OPEN *\n");
+ printk(KERN_INFO "***************************************************\n");
+#endif
+
+ chip = container_of(inode->i_cdev, struct tsl258x_chip, cdev);
+ if (strcmp(chip->taos_name, DEVICE_ID) != 0) {
+ dev_err(devp, "device name error in taos_open(), shows %s\n",
+ chip->taos_name);
+ return -ENODEV;
+ }
+
+ device_released = 0;
+ return ret;
+}
+
+/**
+ * Device release
+ */
+static int taos_release(struct inode *inode, struct file *file)
+{
+ int ret = 0;
+ struct tsl258x_chip *chip;
+
+ device_released = 1;
+ chip = container_of(inode->i_cdev, struct tsl258x_chip, cdev);
+ if (strcmp(chip->taos_name, DEVICE_ID) != 0) {
+ dev_err(devp, "device id incorrect in taos_release(), shows "
+ "%s\n", chip->taos_name);
+ ret = -ENODEV;
+ }
+ taos_fasync(-1, file, 0);
+ free_irq(irqnum, chip);
+ return ret;
+}
+
+/**
+ * Name verification - uses default register values to identify the Taos device
+ */
+static int taos_device_name(unsigned char *bufp, char **device_name)
+{
+ if (((bufp[0x12] & 0xf0) == 0x00) || (bufp[0x12] == 0x08)) {
+ *device_name = "tritonFN";
+ return 1;
+ } else if (((bufp[0x12] & 0xf0) == 0x90)) {
+ *device_name = "skateFN";
+ return 1;
+ }
+ *device_name = "unknown";
+ printk(KERN_INFO "Identified %s\n", *device_name);
+ return 0;
+}
+
+/**
+ * Device read - reads are permitted only within the range of the accessible
+ * registers of the device. The data read is copied safely to user space.
+ */
+static int taos_read(struct file *file, char *buf, size_t count, loff_t *ppos)
+{
+ int ret = 0;
+ struct tsl258x_chip *chip;
+ u8 my_buf[MAX_DEVICE_REGS];
+ u8 reg, i = 0, xfrd = 0;
+
+
+ /*Make sure we not in the middle of accessing the device*/
+ if (mutex_trylock(&als_mutex) == 0) {
+ printk(KERN_INFO "Can't get ALS mutex\n");
+ return -1; /*busy, so return LAST VALUE*/
+ }
+
+ if ((*ppos < 0) || (*ppos >= MAX_DEVICE_REGS) || ((*ppos + count)
+ > MAX_DEVICE_REGS)) {
+ dev_err(devp, "reg limit check failed in taos_read()\n");
+ mutex_unlock(&als_mutex);
+ return -EINVAL;
+ }
+ reg = (u8) *ppos;
+ chip = container_of(file->f_dentry->d_inode->i_cdev,
+ struct tsl258x_chip, cdev);
+ while (xfrd < count) {
+ ret = i2c_smbus_write_byte(chip->client, (CMD_REG | reg));
+ if (ret < 0) {
+ dev_err(devp, "i2c_smbus_write_byte to cmd reg failed "
+ "in taos_read(), err = %d\n", ret);
+ mutex_unlock(&als_mutex);
+ return ret;
+ }
+ my_buf[i++] = i2c_smbus_read_byte(chip->client);
+ reg++;
+ xfrd++;
+ }
+ ret = copy_to_user(buf, my_buf, xfrd);
+ if (ret) {
+ dev_err(devp, "copy_to_user failed in taos_read()\n");
+ mutex_unlock(&als_mutex);
+ return -ENODATA;
+ }
+
+ mutex_unlock(&als_mutex);
+ return (int) xfrd;
+}
+
+/**
+ * Device write - writes are permitted only within the range of the accessible
+ * registers of the device. The data written is copied safely from user space.
+ */
+static int taos_write(struct file *file, const char *buf, size_t count,
+ loff_t *ppos)
+{
+ int ret = 0;
+ struct tsl258x_chip *chip;
+ u8 my_buf[MAX_DEVICE_REGS];
+ u8 reg, i = 0, xfrd = 0;
+
+ if (mutex_trylock(&als_mutex) == 0) {
+ printk(KERN_INFO "Can't get ALS mutex\n");
+ return -1; /*busy, so return LAST VALUE*/
+ }
+
+ if ((*ppos < 0) || (*ppos >= MAX_DEVICE_REGS) || ((*ppos + count)
+ > MAX_DEVICE_REGS)) {
+ dev_err(devp, "reg limit check failed in taos_write()\n");
+ mutex_unlock(&als_mutex);
+ return -EINVAL;
+ }
+ reg = (u8) *ppos;
+ ret = copy_from_user(my_buf, buf, count);
+ if (ret) {
+ dev_err(devp, "copy_from_user failed in taos_write()\n");
+ mutex_unlock(&als_mutex);
+ return -ENODATA;
+ }
+ chip = container_of(file->f_dentry->d_inode->i_cdev,
+ struct tsl258x_chip, cdev);
+ while (xfrd < count) {
+ ret = i2c_smbus_write_byte_data(chip->client, (CMD_REG | reg),
+ my_buf[i++]);
+ if (ret < 0) {
+ dev_err(devp, "i2c_smbus_write_byte_data failed in "
+ "taos_write()\n");
+ mutex_unlock(&als_mutex);
+ return ret;
+ }
+ reg++;
+ xfrd++;
+ }
+
+ mutex_unlock(&als_mutex);
+ return (int) xfrd;
+}
+
+/**
+ * Device seek - seeks are permitted only within the range of the accessible
+ * registers of the device. The new offset is returned.
+ */
+static loff_t taos_llseek(struct file *file, loff_t offset, int orig)
+{
+ loff_t new_pos;
+
+ if ((offset >= MAX_DEVICE_REGS) || (orig < 0) || (orig > 1)) {
+ dev_err(devp, "offset param limit or whence limit check failed "
+ "in taos_llseek()\n");
+ return -EINVAL;
+ }
+ switch (orig) {
+ case 0:
+ new_pos = offset;
+ break;
+ case 1:
+ new_pos = file->f_pos + offset;
+ break;
+ default:
+ return -EINVAL;
+ break;
+ }
+ if ((new_pos < 0) || (new_pos >= MAX_DEVICE_REGS)) {
+ dev_err(devp, "new offset check failed in taos_llseek()\n");
+ return -EINVAL;
+ }
+ file->f_pos = new_pos;
+ return new_pos;
+}
+
+/**
+ * Fasync function - called when the FASYNC flag in the file descriptor of the
+ * device indicates that a new user program wants to be added to the wait queue
+ * of the device - calls fasync_helper() to add the new entry to the queue.
+ */
+static int taos_fasync(int fd, struct file *file, int mode)
+{
+ chip = container_of(file->f_dentry->d_inode->i_cdev, struct
+ tsl258x_chip, cdev);
+ return fasync_helper(fd, file, mode, &chip->async_queue);
+}
+
+/**
+ * Provides initial operational parameter defaults.\n
+ * These defaults may be changed by the following:\n
+ * - system deamon
+ * - user application (via ioctl)
+ * - directly writing to the taos procfs file
+ * - external kernel level modules / applications
+ */
+static void taos_defaults()
+{
+ /*Operational parameters*/
+ taos_cycle_type = LIGHT;
+ /*default is ALS only*/
+ taos_settings.als_time = 100;
+ /*must be a multiple of 50mS*/
+ taos_settings.als_gain = 0;
+ /*this is actually an index into the gain table*/
+ /*assume clear glass as default*/
+ taos_settings.als_gain_trim = 1000;
+ /*default gain trim to account for aperture effects*/
+ taos_settings.als_persistence = 0;
+ /*default number of 'out of bounds' b4 interrupt*/
+ taos_settings.als_cal_target = 130;
+ /*Known external ALS reading used for calibration*/
+ taos_settings.interrupts_enabled = 0;
+ /*Interrupts enabled (ALS) 0 = none*/
+
+ /*Initialize ALS data to defaults*/
+ als_cur_info.als_ch0 = 0;
+ als_cur_info.als_ch1 = 0;
+ als_cur_info.lux = 0;
+
+ taos_settings.als_thresh_high = ALS_THRESHOLD_HI_LIMIT;
+ taos_settings.als_thresh_low = ALS_THRESHOLD_LO_LIMIT;
+
+
+#ifdef TAOS_DEBUG
+printk(KERN_INFO "\nDEFAULTS LOADED\n");
+#endif
+}
+EXPORT_SYMBOL(taos_defaults);
+/*........................................................................*/
+/*@} End of Initial*/
+
+
+/*===========================================================================*/
+/**@...group IOCTL User ioctl Functions
+ * The section applies to 'ioctl' calls used primarily to support user-land applications.\n
+ * @{
+ */
+/**
+ * Ioctl functions - each one is documented below.
+ */
+static int taos_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+ unsigned long arg) {
+ int ret = 0;
+ struct tsl258x_chip *chip;
+ int tmp;
+ /*u8 reg_val;*/
+
+ chip = container_of(inode->i_cdev, struct tsl258x_chip, cdev);
+ switch (cmd) {
+ /**
+ * - ALS_ON - called to set the device in ambient light sense mode.
+ * configured values of light integration time, initial interrupt
+ * filter, gain, and interrupt thresholds (if interrupt driven) are
+ * initialized. Then power, adc, (and interrupt if needed) are enabled.
+ */
+ case TAOS_IOCTL_ALS_ON:
+ taos_cycle_type = LIGHT;
+ printk(KERN_INFO "ALS On\n");
+ return taos_chip_on();
+ break;
+ /**
+ * - ALS_OFF - called to stop ambient light sense mode of operation.
+ * Clears the filter history, and clears the control register.
+ */
+ case TAOS_IOCTL_ALS_OFF:
+ taos_chip_off();
+ break;
+ /**
+ * - ALS_DATA - request for current ambient light data. If correctly
+ * enabled and valid data is available at the device, the function
+ * for lux conversion is called, and the result returned if valid.
+ */
+ case TAOS_IOCTL_ALS_DATA:
+ /*Are we actively updating the struct?*/
+ if ((taos_settings.interrupts_enabled
+ & CNTL_ALS_INT_ENBL) == 0x00)
+ return taos_get_lux(); /*No - so get fresh data*/
+ else
+ return als_cur_info.lux;
+ /*Yes - data is fresh as last change*/
+ break;
+
+ /**
+ * - ALS_CALIBRATE - called to run one calibration cycle, during assembly.
+ * The lux value under a known intensity light source is used to obtain
+ * a "gain trim" multiplier which is to be used to normalize subsequent
+ * lux data read from the device, after the calibration is completed.
+ * This 'known intensity should be the value of als_cal_target.
+ * If not - make is so!
+ */
+ case TAOS_IOCTL_ALS_CALIBRATE:
+ return taos_als_calibrate(taos_settings.als_cal_target);
+ break;
+ /**
+ * - CONFIG-GET - returns the current device configuration values to the
+ * caller. The user mode application can display or store configuration
+ * values, for future reconfiguration of the device, as needed.
+ * Refer to structure "taos_settings" in '.h' file.
+ */
+ case TAOS_IOCTL_CONFIG_GET:
+ ret = copy_to_user((struct taos_settings *) arg, &taos_settings,
+ sizeof(struct taos_settings));
+ if (ret) {
+ dev_err(devp,
+ "copy_to_user() failed in ioctl config_get\n");
+ return -ENODATA;
+ }
+ return ret;
+ break;
+ /**
+ * - GET_ALS - returns the current ALS structure values to the
+ * caller. The values returned represent the last call to
+ * taos_get_lux(). This ioctl can be used when the driver
+ * is operating in the interrupt mode.
+ * Refer to structure "als_cur_info" in '.h' file.
+ */
+ case TAOS_IOCTL_GET_ALS:
+ ret = copy_to_user((struct taos_als_info *) arg,
+ &als_cur_info,
+ sizeof(struct taos_als_info));
+ if (ret) {
+ dev_err(devp,
+ "copy_to_user() failed in ioctl to get "
+ "taos_als_info\n");
+ return -ENODATA;
+ }
+ return ret;
+ break;
+ /**
+ * - CONFIG-SET - used by a user mode application to set the desired
+ * values in the driver's in memory copy of the device configuration
+ * data. Light integration times are aligned optimally, and driver
+ * global variables dependent on configured values are updated here.
+ * Refer to structure "taos_settings" in '.h' file.
+ */
+ case TAOS_IOCTL_CONFIG_SET:
+ ret = copy_from_user(&taos_settings,
+ (struct taos_settings *) arg,
+ sizeof(struct taos_settings));
+ if (ret) {
+ dev_err(devp,
+ "copy_from_user() failed in ioctl config_set\n");
+ return -ENODATA;
+ }
+ return ret;
+ break;
+ /**
+ * - LUX_TABLE-GET - returns the current LUX coefficients table to the
+ * caller. The user mode application can display or store the table
+ * values, for future re-calibration of the device, as needed.
+ * Refer to structure "taos_lux" in '.h' file.
+ */
+ case TAOS_IOCTL_LUX_TABLE_GET:
+ ret = copy_to_user((struct taos_lux *) arg,
+ &taos_device_lux,
+ sizeof(taos_device_lux));
+ if (ret) {
+ dev_err(devp,
+ "copy_to_user() failed in ioctl "
+ "TAOS_IOCTL_LUX_TABLE_GET\n");
+ return -ENODATA;
+ }
+ return ret;
+ break;
+ /**
+ * - LUX TABLE-SET - used by a user mode application to set the desired
+ * LUX table values in the driver's in memory copy of the lux table
+ * Refer to structure "taos_lux" in '.h' file.
+ */
+ case TAOS_IOCTL_LUX_TABLE_SET:
+ ret = copy_from_user(&taos_lux,
+ (struct taos_lux *) arg,
+ sizeof(taos_device_lux));
+ if (ret) {
+ dev_err(devp, "copy_from_user() failed in ioctl "
+ "TAOS_IOCTL_LUX_TABLE_SET\n");
+ return -ENODATA;
+ }
+#ifdef ASYNC_NOTIFY
+ /*Notify the user-land app (if any)*/
+ if (chip->async_queue)
+ kill_fasync(&chip->async_queue, SIGIO, POLL_IN);
+#endif
+
+
+ return ret;
+ break;
+ /**
+ * - TAOS_IOCTL_ID - used to query driver name & version
+ */
+ case TAOS_IOCTL_ID:
+ ret = copy_to_user((char *) arg,
+ &driver_version_id,
+ sizeof(driver_version_id));
+ dev_info(devp, "%s\n", DRIVER_VERSION_ID);
+ return ret;
+ break;
+ /*
+ * - TAOS_IOCTL_SET_GAIN - used to set/change the device analog gain.
+ * The value passed into here from the user is the index into the table.
+ * Index = (0 - 3) Used to validate the gain selection index
+ */
+ case TAOS_IOCTL_SET_GAIN:
+ get_user(tmp, (int *)arg);
+ if (tmp > MAX_GAIN_STAGES)
+ return -1;
+ taos_settings.als_gain = tmp;
+ ret = taos_i2c_write(CMD_REG|GAIN, (u8 *)&tmp);
+ if (ret < 0) {
+ dev_err(devp, "taos_i2c_write to turn on device "
+ "failed in taos_chip_on.\n");
+ return -1;
+ }
+ return ret;
+ break;
+
+ default:
+ return -EINVAL;
+ break;
+ }
+
+ return ret;
+
+ }
+/*........................................................................*/
+/*@} end of IOCTL section*/
+
+
+/*===========================================================================*/
+/**@...group ALS Ambient Light Sense (ALS)
+ * The section applies to the ALS related functions.\n
+ * Other ALS releated functions may appear elsewhere in the code.\n
+ * @{
+ */
+
+/*........................................................................*/
+
+/**
+ * Reads and calculates current lux value.
+ * The raw ch0 and ch1 values of the ambient light sensed in the last
+ * integration cycle are read from the device.
+ * Time scale factor array values are adjusted based on the integration time.
+ * The raw values are multiplied by a scale factor, and device gain is obtained
+ * using gain index. Limit checks are done next, then the ratio of a multiple
+ * of ch1 value, to the ch0 value, is calculated. The array taos_device_luxP[]
+ * declared above is then scanned to find the first ratio value that is just
+ * above the ratio we just calculated. The ch0 and ch1 multiplier constants in
+ * the array are then used along with the time scale factor array values, to
+ * calculate the lux.
+ *
+ * \param none
+ * \return int -1 = Failure, Lux Value = success
+ */
+static int taos_get_lux(void)
+{
+ u32 ch0, ch1; /* separated ch0/ch1 data from device */
+ u32 lux; /* raw lux calculated from device data */
+ u32 ratio;
+ u8 buf[5];
+ struct taos_lux *p;
+
+ int i, ret;
+
+ u32 ch0lux = 0x0000;
+ u32 ch1lux = 0x0000;
+
+ if (mutex_trylock(&als_mutex) == 0) {
+ printk(KERN_INFO "Can't get ALS mutex\n");
+ return als_cur_info.lux; /*busy, so return LAST VALUE*/
+ }
+
+ if (taos_chip_status != TAOS_CHIP_WORKING) {
+ /*device is not enabled*/
+ printk(KERN_INFO "device is not enabled\n");
+ mutex_unlock(&als_mutex);
+ return -1;
+ }
+
+ if ((taos_cycle_type & LIGHT) == 0) {
+ /*device not in ALS mode*/
+ printk(KERN_INFO "device not in ALS mode\n");
+ mutex_unlock(&als_mutex);
+ return -1;
+ }
+
+ ret = taos_i2c_read((CMD_REG), &buf[0], 1);
+ if (ret < 0) {
+ printk(KERN_INFO "taos_i2c_read() to CMD_REG reg failed in "
+ "taos_get_lux()\n");
+ mutex_unlock(&als_mutex);
+ return -1;
+ }
+ /* is data new & valid */
+ if (!(buf[0] & STA_ADCINTR)) {
+ printk(KERN_INFO "Data not valid, so return LAST VALUE\n");
+ mutex_unlock(&als_mutex);
+ return als_cur_info.lux; /*have no data, so return LAST VALUE*/
+ }
+
+ for (i = 0; i < 4; i++) {
+ ret = taos_i2c_read((CMD_REG | (ALS_CHAN0LO + i)), &buf[i], 1);
+ if (ret < 0) {
+ dev_err(devp,
+ "taos_i2c_read() to (ALS_CHAN0LO + i) failed in "
+ "taos_get_lux()\n");
+ mutex_unlock(&als_mutex);
+ return -1;
+ }
+ }
+
+ /* clear status, really interrupt status (interrupts are off), but
+ * we use the bit anyway */
+ ret = taos_i2c_write_command(CMD_REG | CMD_SPL_FN | CMD_ALS_INTCLR);
+ if (ret < 0) {
+ dev_err(devp,
+ "taos_i2c_write_command failed in "
+ "taos_chip_on, err = %d\n", ret);
+ mutex_unlock(&als_mutex);
+ return -1; /*have no data, so return fail*/
+ }
+
+ /* extract ALS/lux data */
+ ch0 = (buf[1] << 8) | buf[0];
+ ch1 = (buf[3] << 8) | buf[2];
+
+ als_cur_info.als_ch0 = ch0;
+ als_cur_info.als_ch1 = ch1;
+
+
+#ifdef TAOS_DEBUG
+ printk(KERN_INFO " ch0=%d/0x%x ch1=%d/0x%x\n", ch0, ch0, ch1, ch1);
+#endif
+
+ if ((ch0 >= als_saturation) || (ch1 >= als_saturation)) {
+return_max:
+ als_cur_info.lux = MAX_LUX;
+ mutex_unlock(&als_mutex);
+ return als_cur_info.lux;
+ }
+
+ if (ch0 == 0) {
+ als_cur_info.lux = 0;
+#ifdef TAOS_DEBUG
+ printk(KERN_INFO "ch0==0\n");
+#endif
+ mutex_unlock(&als_mutex);
+
+ return als_cur_info.lux;
+ /*have no data, so return LAST VALUE*/
+ }
+ /* calculate ratio */
+ ratio = (ch1 << 15) / ch0;
+ /* convert to unscaled lux using the pointer to the table */
+ for (p = (struct taos_lux *) taos_device_lux;
+ p->ratio != 0 && p->ratio < ratio; p++)
+ ;
+
+ if (p->ratio == 0) {
+#ifdef TAOS_DEBUG
+ dev_info(devp, "ratio = %04x p->ratio = %04x\n",
+ ratio, p->ratio);
+#endif
+ lux = 0;
+ } else {
+ ch0lux = ((ch0 * p->ch0) +
+ (gainadj[taos_settings.als_gain].ch0 >> 1))
+ / gainadj[taos_settings.als_gain].ch0;
+ ch1lux = ((ch1 * p->ch1) +
+ (gainadj[taos_settings.als_gain].ch1 >> 1))
+ / gainadj[taos_settings.als_gain].ch1;
+ lux = ch0lux - ch1lux;
+ }
+
+ /* note: lux is 31 bit max at this point */
+ if (ch1lux > ch0lux) {
+ printk(KERN_INFO "No Data - Return last value\n");
+ als_cur_info.lux = 0;
+ mutex_unlock(&als_mutex);
+ return als_cur_info.lux; /*have no data, so return LAST VALUE*/
+ }
+ /* adjust for active time scale */
+ lux = (lux + (als_time_scale >> 1)) / als_time_scale;
+ /* adjust for active gain scale */
+ lux >>= 13; /* tables have factor of 8192 builtin for accuracy */
+
+ lux = (lux * taos_settings.als_gain_trim + 500) / 1000;
+
+
+#ifdef TAOS_DEBUG
+ printk(KERN_INFO "lux=%d\n", lux);
+#endif
+ if (lux > MAX_LUX) /* check for overflow */
+ goto return_max;
+
+ als_cur_info.lux = lux;
+ /*Update the structure with the latest VALID lux.*/
+
+ mutex_unlock(&als_mutex);
+ return lux;
+}
+EXPORT_SYMBOL(taos_get_lux);
+
+/**
+ * Obtain single reading and calculate the als_gain_trim (later used to derive actual lux)
+ *\param ulong als_cal_target ALS target (real world)
+ *\return int updated gain_trim value
+ */
+int taos_als_calibrate(unsigned long als_cal_target)
+{
+ u8 reg_val;
+ unsigned int gain_trim_val;
+ int ret;
+ int lux_val;
+
+
+ /*This may seem redundant but..
+ We need this next line in case we call this function from an
+ external application who has a different target value than
+ our defaults.
+ In which case, make 'that' our new default/settings.*/
+ taos_settings.als_cal_target = als_cal_target;
+
+ ret = i2c_smbus_write_byte(chip->client, (CMD_REG | CNTRL));
+ if (ret < 0) {
+ dev_err(devp,
+ "i2c_smbus_write_byte to cmd reg failed in "
+ "ioctl als_calibrate\n");
+ return ret;
+ }
+ reg_val = i2c_smbus_read_byte(chip->client);
+
+ if ((reg_val & (CNTL_ADC_ENBL | CNTL_PWRON))
+ != (CNTL_ADC_ENBL | CNTL_PWRON)) {
+ dev_err(devp,
+ "reg_val & (CNTL_ADC_ENBL | CNTL_PWRON)) "
+ "!= (CNTL_ADC_ENBL | CNTL_PWRON) in ioctl als_calibrate\n");
+ return -ENODATA;
+ }
+
+ ret = i2c_smbus_write_byte(chip->client, (CMD_REG | STATUS));
+ if (ret < 0) {
+ dev_err(devp,
+ "i2c_smbus_write_byte to cmd reg failed in "
+ "ioctl als_calibrate\n");
+ return ret;
+ }
+ reg_val = i2c_smbus_read_byte(chip->client);
+
+ if ((reg_val & STA_ADCVALID) != STA_ADCVALID) {
+ dev_err(devp,
+ "(reg_val & STA_ADCVALID) != STA_ADCVALID in "
+ "ioctl als_calibrate\n");
+ return -ENODATA;
+ }
+ lux_val = taos_get_lux();
+ if (lux_val < 0) {
+ dev_err(devp,
+ "taos_get_lux() returned bad value %d in "
+ "ioctl als_calibrate\n",
+ lux_val);
+ return lux_val;
+ }
+ gain_trim_val = (unsigned int) (((taos_settings.als_cal_target)
+ * taos_settings.als_gain_trim) / lux_val);
+
+ dev_info(devp, "\n\ntaos_settings.als_cal_target = %d\n"
+ "taos_settings.als_gain_trim = %d\nlux_val = %d\n",
+ taos_settings.als_cal_target,
+ taos_settings.als_gain_trim,
+ lux_val);
+
+ if ((gain_trim_val < 250) || (gain_trim_val > 4000)) {
+ dev_err(devp,
+ "ALS calibrate result %d out of range "
+ "in ioctl als_calibrate\n",
+ gain_trim_val);
+ return -ENODATA;
+ }
+ taos_settings.als_gain_trim = (int) gain_trim_val;
+
+ return (int) gain_trim_val;
+}
+EXPORT_SYMBOL(taos_als_calibrate);
+
+/*........................................................................*/
+/*@} End of ALS section*/
+
+/*===========================================================================*/
+/**@...group DEV_CTRL Device Control Functions
+ * @{
+ */
+
+/*........................................................................*/
+/**
+ * Turn the device on.
+ * Configuration and taos_cycle_type must be set before calling this function.
+ * \param none.
+ * \return int 0 = success, < 0 = failure
+ */
+static int taos_chip_on()
+{
+ int i;
+ int ret = 0;
+ u8 *uP;
+ u8 utmp;
+ int als_count;
+ int als_time;
+
+
+ /*make sure taos_cycle_type is set.*/
+ if ((taos_cycle_type != LIGHT))
+ return -1;
+
+ /*and make sure we're not already on*/
+ if (taos_chip_status == TAOS_CHIP_WORKING) {
+ /*if forcing a register update - turn off, then on*/
+ printk(KERN_INFO "device is already enabled\n");
+ return -1;
+ }
+
+ /* . . . . . . . . SHADOW REGISTER INITIALIZATION . . . . . . . . . . .
+ Note:
+ If interrupts are enabled, keeping persist at 0 should prime the pump.
+ So don't set persist in shadow register. Just enable if required.*/
+ taos_config[INTERRUPT] = (taos_settings.interrupts_enabled & 0xF0);
+
+
+ /*determine als integration regster*/
+ als_count = (taos_settings.als_time * 100 + 135) / 270;
+ if (als_count == 0)
+ als_count = 1; /*ensure at least one cycle*/
+
+
+ /*convert back to time (encompasses overrides)*/
+ if (taos_cycle_type & LIGHT) {
+ als_time = (als_count * 27 + 5) / 10;
+ taos_config[ALS_TIME] = 256 - als_count;
+ } else
+ taos_config[ALS_TIME] = 0xff;
+
+
+ /*Set the gain based on taos_settings struct*/
+ taos_config[GAIN] = taos_settings.als_gain;
+
+
+ /*set globals re scaling and saturation*/
+ als_saturation = als_count * 922; /*90% of full scale*/
+ als_time_scale = (als_time + 25) / 50;
+
+
+ /* . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+ SKATE Specific power-on / adc enable sequence
+ Power on the device 1st.*/
+ utmp = CNTL_PWRON;
+ ret = taos_i2c_write(CMD_REG | CNTRL, &utmp);
+ if (ret < 0) {
+ dev_err(devp,
+ "taos_i2c_write to turn on device failed in "
+ "taos_chip_on.\n");
+ return -1;
+ }
+
+ /*User the following shadow copy for our delay before enabling ADC
+ Write ALL THE REGISTERS*/
+ for (i = 0, uP = taos_config; i < TAOS_REG_MAX; i++) {
+ ret = taos_i2c_write(CMD_REG + i, uP++);
+ if (ret < 0) {
+ dev_err(devp,
+ "taos_i2c_write to reg %d failed in "
+ "taos_chip_on.\n", i);
+ return -1;
+ }
+ }
+
+ mdelay(3);
+ /*NOW enable the ADC
+ initialize the desired mode of operation*/
+ utmp = CNTL_PWRON | CNTL_ADC_ENBL;
+ ret = taos_i2c_write(CMD_REG | CNTRL, &utmp);
+ if (ret < 0) {
+ dev_err(devp,
+ "taos_i2c_write to turn on device failed in "
+ "taos_chip_on.\n");
+ return -1;
+ }
+ taos_chip_status = TAOS_CHIP_WORKING;
+
+#ifdef TAOS_DEBUG
+ dev_info(devp, "chip_on() called\n\n");
+#endif
+
+ return ret; /*returns result of last i2cwrite*/
+}
+EXPORT_SYMBOL(taos_chip_on);
+
+/*........................................................................*/
+/**
+ * Turn the device OFF.
+ * \param none.
+ * \return int 0 = success, < 0 = failure
+ */
+static int taos_chip_off()
+{
+ int ret;
+ u8 utmp;
+
+
+ /*turn device off*/
+ taos_chip_status = TAOS_CHIP_SLEEP;
+ utmp = 0x00;
+ ret = taos_i2c_write(CMD_REG | CNTRL, &utmp);
+ als_on = FALSE;
+ /*init_done = 0x00; *//*used by ALS irq as one/first shot*/
+#ifdef TAOS_DEBUG
+ printk(KERN_INFO "chip_off() called\n");
+#endif
+
+ return ret;
+
+}
+EXPORT_SYMBOL(taos_chip_off);
+/*........................................................................*/
+/*@} End of Device Control Section*/
+
+/*===========================================================================*/
+
+/*===========================================================================*/
+/**@...group I2C-HAL I2C/SMBus Communication Functions
+ * The sections pertains to the driver/device communication functions\n
+ * facilitated via SMBus in an I2C manner.\n
+ * These functions represent several layers of abstraction.
+ * Also note, some i2c controllers do not support block read/write.
+ * @{
+ */
+
+/**
+ * Read a number of bytes starting at register (reg) location.
+ *
+ * \param unsigned char reg - device register
+ * \param unsigned char *val - location to store results
+ * \param unsigned int number of bytes to read
+ * \return TAOS_SUCCESS, or i2c_smbus_write_byte ERROR code
+ *
+ */
+static int taos_i2c_read(u8 reg, u8 *val, unsigned int len)
+{
+ int result;
+ int i;
+
+ if (len > MAXI2C)
+ len = MAXI2C;
+ for (i = 0; i < len; i++) {
+ /* select register to write */
+ if (reg >= 0) {
+ result = i2c_smbus_write_byte(chip->client,
+ (CMD_REG | (reg + i)));
+
+ if (result < 0) {
+ dev_err(devp,
+ "FAILED: i2c_smbus_write_byte_data in "
+ "taos_io_read()\n");
+ return result;
+ }
+ /* read the data */
+ *val = i2c_smbus_read_byte(chip->client);
+#ifdef TAOS_DEBUG_SMBUS
+ dev_info(devp,
+ "READ FROM REGISTER [%02X] -->%02x<--\n",
+ (CMD_REG | (reg + i)) , *data);
+#endif
+ val++;
+ }
+ }
+ return TAOS_SUCCESS;
+}
+
+/**
+ * This function is used to send a an register address followed by a data value
+ * When calling this function remember to set the register MSBit
+ * (if applicable).
+ * \param unsigned char register
+ * \param unsigned char * pointer to data value(s) to be written
+ * \return TAOS_SUCCESS, or i2c_smbus_write_byte error code.
+ */
+static int taos_i2c_write(u8 reg, u8 *val)
+{
+ int retval;
+ retval = i2c_smbus_write_byte_data(chip->client, reg, (*val));
+ if (retval < 0) {
+ dev_err(devp, "FAILED: i2c_smbus_write_byte_data\n");
+ return retval;
+ }
+
+ return TAOS_SUCCESS;
+}
+
+/**
+ * This function is used to send a command to device command/control register
+ * All bytes sent using this command have their MSBit set - it's a command!
+ * \param unsigned char register to write
+ * \return TAOS_SUCCESS, or i2c_smbus_write_byte error code.
+ */
+static int taos_i2c_write_command(u8 reg)
+{
+ int result;
+ u8 *p;
+ u8 buf;
+
+ p = &buf;
+ *p = reg |= CMD_REG;
+ /*write the data*/
+ result = i2c_smbus_write_byte(chip->client, (*p));
+ if (result < 0) {
+ dev_err(devp, "FAILED: i2c_smbus_write_byte\n");
+ return result;
+ }
+ return TAOS_SUCCESS;
+}
+
+/*........................................................................*/
+/*@} //end of I2C-HAL section*/
+
+
+/**@...group group6 Sysfs Interface Functions
+ * The following functions are for access via the sysfs style interface.\n
+ * Use 'cat' to read, 'echo >' to write\n
+ * @{
+ */
+
+/*........................................................................*/
+/*sysfs interface functions begin here*/
+
+static ssize_t taos_device_id(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%s %s\n", DEVICE_ID, DRIVER_VERSION_ID);
+}
+
+static ssize_t taos_power_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", taos_chip_status);
+ return 0;
+}
+
+static ssize_t taos_power_state_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len)
+{
+ unsigned long value;
+
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ if (value == 1)
+ taos_chip_on();
+ else
+ taos_chip_off();
+
+ return len;
+}
+
+static ssize_t taos_gain_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", taos_settings.als_gain);
+ return 0;
+}
+
+static ssize_t taos_gain_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len)
+{
+ unsigned long value;
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+ if (value) {
+ if (value > 4) {
+ printk(KERN_INFO "Invalid Gain Index\n");
+ return -1;
+ } else {
+ taos_settings.als_gain = value;
+ }
+ }
+ return len;
+}
+
+static ssize_t taos_interrupt_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", taos_settings.interrupts_enabled);
+ return 0;
+}
+
+static ssize_t taos_interrupt_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len)
+{
+ unsigned long value;
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ if (value) {
+ if (value > 1) {
+ printk(KERN_INFO "Invalid: 0 or 1\n");
+ return -1;
+ } else {
+ taos_settings.interrupts_enabled = CNTL_ALS_INT_ENBL;
+ }
+ }
+ return len;
+}
+
+static ssize_t taos_als_time_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", taos_settings.als_time);
+ return 0;
+}
+
+static ssize_t taos_als_time_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len)
+{
+ unsigned long value;
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ if (value)
+ taos_settings.als_time = value;
+
+ return len;
+}
+
+static ssize_t taos_als_trim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", taos_settings.als_gain_trim);
+ return 0;
+}
+
+static ssize_t taos_als_trim_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len)
+{
+ unsigned long value;
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ if (value)
+ taos_settings.als_gain_trim = value;
+
+ return len;
+}
+
+static ssize_t taos_als_persistence_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", taos_settings.als_persistence);
+ return 0;
+}
+
+static ssize_t taos_als_persistence_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len)
+{
+ unsigned long value;
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ if (value)
+ taos_settings.als_persistence = value;
+
+ return len;
+}
+
+static ssize_t taos_als_cal_target_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", taos_settings.als_cal_target);
+ return 0;
+}
+
+static ssize_t taos_als_cal_target_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len)
+{
+ unsigned long value;
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ if (value)
+ taos_settings.als_cal_target = value;
+
+ return len;
+}
+
+static ssize_t taos_lux_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int lux = 0;
+ if ((taos_settings.interrupts_enabled & CNTL_ALS_INT_ENBL) == 0x00)
+ lux = taos_get_lux(); /*get fresh data*/
+ else
+ lux = als_cur_info.lux; /*data is fresh as last change*/
+
+ return sprintf(buf, "%d\n", lux);
+ return 0;
+}
+
+static ssize_t taos_do_calibrate(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len)
+{
+ unsigned long value;
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ if (value == 1)
+ taos_als_calibrate(taos_settings.als_cal_target);
+
+ return len;
+}
+
+static ssize_t taos_als_thresh_low_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", taos_settings.als_thresh_low);
+ return 0;
+}
+
+static ssize_t taos_als_thresh_low_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len)
+{
+ unsigned long value;
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ if (value)
+ taos_settings.als_thresh_low = value;
+
+ return len;
+}
+
+static ssize_t taos_als_thresh_high_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", taos_settings.als_thresh_high);
+ return 0;
+}
+
+static ssize_t taos_als_thresh_high_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len)
+{
+ unsigned long value;
+ if (strict_strtoul(buf, 0, &value))
+ return -EINVAL;
+
+ if (value)
+ taos_settings.als_thresh_high = value;
+
+ return len;
+}
+
+/*@} End of Sysfs Interface Functions - gp6*/
+/*===========================================================================*/
+
+static void taos_als_auto_update(struct work_struct *update)
+{
+ if (taos_chip_status != TAOS_CHIP_WORKING) {
+ taos_chip_on();
+ mdelay(100);
+ }
+ taos_get_lux();
+ input_report_abs(taos_dev, ABS_X, als_cur_info.lux);
+ input_sync(taos_dev);
+
+ queue_delayed_work(taos_wq0, luxUd, LUX_UPDATE_PERIOD);
+
+}
+
+
+
+MODULE_AUTHOR("J. August Brenner<jbrenner@...sinc.com>");
+MODULE_DESCRIPTION("TAOS 258x ambient light sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(taos_init);
+module_exit(taos_exit);
+
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists