| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1298869848-4283-1-git-send-email-mark.a.allyn@intel.com>
Date: Sun, 27 Feb 2011 21:10:48 -0800
From: Mark Allyn <mark.a.allyn@...el.com>
To: linux-kernel@...r.kernel.org, greg@...ah.com,
mark.a.allyn@...el.com, alan@...ux.intel.com
Subject: RFC: [PATCH 1/5] staging: sep: rename sep_driver.c to sep_main.c
This allows adding sep_crypto.c and yet keep the driver named sep_driver
This only renames the file and changes the Makefile. No changes
made to content of c source file
Signed-off-by: Mark Allyn <mark.a.allyn@...el.com>
---
drivers/staging/sep/Makefile | 2 +-
drivers/staging/sep/sep_driver.c | 3348 --------------------------------------
drivers/staging/sep/sep_main.c | 3348 ++++++++++++++++++++++++++++++++++++++
3 files changed, 3349 insertions(+), 3349 deletions(-)
delete mode 100644 drivers/staging/sep/sep_driver.c
create mode 100644 drivers/staging/sep/sep_main.c
diff --git a/drivers/staging/sep/Makefile b/drivers/staging/sep/Makefile
index 628d5f9..faa90a4 100644
--- a/drivers/staging/sep/Makefile
+++ b/drivers/staging/sep/Makefile
@@ -1,2 +1,2 @@
obj-$(CONFIG_DX_SEP) := sep_driver.o
-
+sep_driver-objs := sep_main.o
diff --git a/drivers/staging/sep/sep_driver.c b/drivers/staging/sep/sep_driver.c
deleted file mode 100644
index d841289..0000000
--- a/drivers/staging/sep/sep_driver.c
+++ /dev/null
@@ -1,3348 +0,0 @@
-/*
- *
- * sep_driver.c - Security Processor Driver main group of functions
- *
- * Copyright(c) 2009,2010 Intel Corporation. All rights reserved.
- * Contributions(c) 2009,2010 Discretix. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * CONTACTS:
- *
- * Mark Allyn mark.a.allyn@...el.com
- * Jayant Mangalampalli jayant.mangalampalli@...el.com
- *
- * CHANGES:
- *
- * 2009.06.26 Initial publish
- * 2010.09.14 Upgrade to Medfield
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/miscdevice.h>
-#include <linux/fs.h>
-#include <linux/cdev.h>
-#include <linux/kdev_t.h>
-#include <linux/mutex.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/poll.h>
-#include <linux/wait.h>
-#include <linux/pci.h>
-#include <linux/firmware.h>
-#include <linux/slab.h>
-#include <linux/ioctl.h>
-#include <asm/current.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/pagemap.h>
-#include <asm/cacheflush.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/jiffies.h>
-#include <linux/rar_register.h>
-
-#include "../memrar/memrar.h"
-
-#include "sep_driver_hw_defs.h"
-#include "sep_driver_config.h"
-#include "sep_driver_api.h"
-#include "sep_dev.h"
-
-/*----------------------------------------
- DEFINES
------------------------------------------*/
-
-#define SEP_RAR_IO_MEM_REGION_SIZE 0x40000
-
-/*--------------------------------------------
- GLOBAL variables
---------------------------------------------*/
-
-/* Keep this a single static object for now to keep the conversion easy */
-
-static struct sep_device *sep_dev;
-
-/**
- * sep_load_firmware - copy firmware cache/resident
- * @sep: pointer to struct sep_device we are loading
- *
- * This functions copies the cache and resident from their source
- * location into destination shared memory.
- */
-static int sep_load_firmware(struct sep_device *sep)
-{
- const struct firmware *fw;
- char *cache_name = "cache.image.bin";
- char *res_name = "resident.image.bin";
- char *extapp_name = "extapp.image.bin";
- int error ;
- unsigned long work1, work2, work3;
-
- /* Set addresses and load resident */
- sep->resident_bus = sep->rar_bus;
- sep->resident_addr = sep->rar_addr;
-
- error = request_firmware(&fw, res_name, &sep->pdev->dev);
- if (error) {
- dev_warn(&sep->pdev->dev, "can't request resident fw\n");
- return error;
- }
-
- memcpy(sep->resident_addr, (void *)fw->data, fw->size);
- sep->resident_size = fw->size;
- release_firmware(fw);
-
- dev_dbg(&sep->pdev->dev, "resident bus is %lx\n",
- (unsigned long)sep->resident_bus);
-
- /* Set addresses for dcache (no loading needed) */
- work1 = (unsigned long)sep->resident_bus;
- work2 = (unsigned long)sep->resident_size;
- work3 = (work1 + work2 + (1024 * 4)) & 0xfffff000;
- sep->dcache_bus = (dma_addr_t)work3;
-
- work1 = (unsigned long)sep->resident_addr;
- work2 = (unsigned long)sep->resident_size;
- work3 = (work1 + work2 + (1024 * 4)) & 0xfffff000;
- sep->dcache_addr = (void *)work3;
-
- sep->dcache_size = 1024 * 128;
-
- /* Set addresses and load cache */
- sep->cache_bus = sep->dcache_bus + sep->dcache_size;
- sep->cache_addr = sep->dcache_addr + sep->dcache_size;
-
- error = request_firmware(&fw, cache_name, &sep->pdev->dev);
- if (error) {
- dev_warn(&sep->pdev->dev, "Unable to request cache firmware\n");
- return error;
- }
-
- memcpy(sep->cache_addr, (void *)fw->data, fw->size);
- sep->cache_size = fw->size;
- release_firmware(fw);
-
- dev_dbg(&sep->pdev->dev, "cache bus is %08lx\n",
- (unsigned long)sep->cache_bus);
-
- /* Set addresses and load extapp */
- sep->extapp_bus = sep->cache_bus + (1024 * 370);
- sep->extapp_addr = sep->cache_addr + (1024 * 370);
-
- error = request_firmware(&fw, extapp_name, &sep->pdev->dev);
- if (error) {
- dev_warn(&sep->pdev->dev, "Unable to request extapp firmware\n");
- return error;
- }
-
- memcpy(sep->extapp_addr, (void *)fw->data, fw->size);
- sep->extapp_size = fw->size;
- release_firmware(fw);
-
- dev_dbg(&sep->pdev->dev, "extapp bus is %08llx\n",
- (unsigned long long)sep->extapp_bus);
-
- return error;
-}
-
-MODULE_FIRMWARE("sep/cache.image.bin");
-MODULE_FIRMWARE("sep/resident.image.bin");
-MODULE_FIRMWARE("sep/extapp.image.bin");
-
-/**
- * sep_dump_message - dump the message that is pending
- * @sep: SEP device
- */
-static void sep_dump_message(struct sep_device *sep)
-{
- int count;
- u32 *p = sep->shared_addr;
- for (count = 0; count < 12 * 4; count += 4)
- dev_dbg(&sep->pdev->dev, "Word %d of the message is %x\n",
- count, *p++);
-}
-
-/**
- * sep_map_and_alloc_shared_area - allocate shared block
- * @sep: security processor
- * @size: size of shared area
- */
-static int sep_map_and_alloc_shared_area(struct sep_device *sep)
-{
- sep->shared_addr = dma_alloc_coherent(&sep->pdev->dev,
- sep->shared_size,
- &sep->shared_bus, GFP_KERNEL);
-
- if (!sep->shared_addr) {
- dev_warn(&sep->pdev->dev,
- "shared memory dma_alloc_coherent failed\n");
- return -ENOMEM;
- }
- dev_dbg(&sep->pdev->dev,
- "shared_addr %zx bytes @%p (bus %llx)\n",
- sep->shared_size, sep->shared_addr,
- (unsigned long long)sep->shared_bus);
- return 0;
-}
-
-/**
- * sep_unmap_and_free_shared_area - free shared block
- * @sep: security processor
- */
-static void sep_unmap_and_free_shared_area(struct sep_device *sep)
-{
- dma_free_coherent(&sep->pdev->dev, sep->shared_size,
- sep->shared_addr, sep->shared_bus);
-}
-
-/**
- * sep_shared_bus_to_virt - convert bus/virt addresses
- * @sep: pointer to struct sep_device
- * @bus_address: address to convert
- *
- * Returns virtual address inside the shared area according
- * to the bus address.
- */
-static void *sep_shared_bus_to_virt(struct sep_device *sep,
- dma_addr_t bus_address)
-{
- return sep->shared_addr + (bus_address - sep->shared_bus);
-}
-
-/**
- * open function for the singleton driver
- * @inode_ptr struct inode *
- * @file_ptr struct file *
- *
- * Called when the user opens the singleton device interface
- */
-static int sep_singleton_open(struct inode *inode_ptr, struct file *file_ptr)
-{
- struct sep_device *sep;
-
- /*
- * Get the SEP device structure and use it for the
- * private_data field in filp for other methods
- */
- sep = sep_dev;
-
- file_ptr->private_data = sep;
-
- if (test_and_set_bit(0, &sep->singleton_access_flag))
- return -EBUSY;
- return 0;
-}
-
-/**
- * sep_open - device open method
- * @inode: inode of SEP device
- * @filp: file handle to SEP device
- *
- * Open method for the SEP device. Called when userspace opens
- * the SEP device node.
- *
- * Returns zero on success otherwise an error code.
- */
-static int sep_open(struct inode *inode, struct file *filp)
-{
- struct sep_device *sep;
-
- /*
- * Get the SEP device structure and use it for the
- * private_data field in filp for other methods
- */
- sep = sep_dev;
- filp->private_data = sep;
-
- /* Anyone can open; locking takes place at transaction level */
- return 0;
-}
-
-/**
- * sep_singleton_release - close a SEP singleton device
- * @inode: inode of SEP device
- * @filp: file handle being closed
- *
- * Called on the final close of a SEP device. As the open protects against
- * multiple simultaenous opens that means this method is called when the
- * final reference to the open handle is dropped.
- */
-static int sep_singleton_release(struct inode *inode, struct file *filp)
-{
- struct sep_device *sep = filp->private_data;
-
- clear_bit(0, &sep->singleton_access_flag);
- return 0;
-}
-
-/**
- * sep_request_daemonopen - request daemon open method
- * @inode: inode of SEP device
- * @filp: file handle to SEP device
- *
- * Open method for the SEP request daemon. Called when
- * request daemon in userspace opens the SEP device node.
- *
- * Returns zero on success otherwise an error code.
- */
-static int sep_request_daemon_open(struct inode *inode, struct file *filp)
-{
- struct sep_device *sep = sep_dev;
- int error = 0;
-
- filp->private_data = sep;
-
- /* There is supposed to be only one request daemon */
- if (test_and_set_bit(0, &sep->request_daemon_open))
- error = -EBUSY;
- return error;
-}
-
-/**
- * sep_request_daemon_release - close a SEP daemon
- * @inode: inode of SEP device
- * @filp: file handle being closed
- *
- * Called on the final close of a SEP daemon.
- */
-static int sep_request_daemon_release(struct inode *inode, struct file *filp)
-{
- struct sep_device *sep = filp->private_data;
-
- dev_dbg(&sep->pdev->dev, "Request daemon release for pid %d\n",
- current->pid);
-
- /* Clear the request_daemon_open flag */
- clear_bit(0, &sep->request_daemon_open);
- return 0;
-}
-
-/**
- * sep_req_daemon_send_reply_command_handler - poke the SEP
- * @sep: struct sep_device *
- *
- * This function raises interrupt to SEPm that signals that is has a
- * new command from HOST
- */
-static int sep_req_daemon_send_reply_command_handler(struct sep_device *sep)
-{
- unsigned long lck_flags;
-
- sep_dump_message(sep);
-
- /* Counters are lockable region */
- spin_lock_irqsave(&sep->snd_rply_lck, lck_flags);
- sep->send_ct++;
- sep->reply_ct++;
-
- /* Send the interrupt to SEP */
- sep_write_reg(sep, HW_HOST_HOST_SEP_GPR2_REG_ADDR, sep->send_ct);
- sep->send_ct++;
-
- spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
-
- dev_dbg(&sep->pdev->dev,
- "sep_req_daemon_send_reply send_ct %lx reply_ct %lx\n",
- sep->send_ct, sep->reply_ct);
-
- return 0;
-}
-
-
-/**
- * sep_free_dma_table_data_handler - free DMA table
- * @sep: pointere to struct sep_device
- *
- * Handles the request to free DMA table for synchronic actions
- */
-static int sep_free_dma_table_data_handler(struct sep_device *sep)
-{
- int count;
- int dcb_counter;
- /* Pointer to the current dma_resource struct */
- struct sep_dma_resource *dma;
-
- for (dcb_counter = 0; dcb_counter < sep->nr_dcb_creat; dcb_counter++) {
- dma = &sep->dma_res_arr[dcb_counter];
-
- /* Unmap and free input map array */
- if (dma->in_map_array) {
- for (count = 0; count < dma->in_num_pages; count++) {
- dma_unmap_page(&sep->pdev->dev,
- dma->in_map_array[count].dma_addr,
- dma->in_map_array[count].size,
- DMA_TO_DEVICE);
- }
- kfree(dma->in_map_array);
- }
-
- /* Unmap output map array, DON'T free it yet */
- if (dma->out_map_array) {
- for (count = 0; count < dma->out_num_pages; count++) {
- dma_unmap_page(&sep->pdev->dev,
- dma->out_map_array[count].dma_addr,
- dma->out_map_array[count].size,
- DMA_FROM_DEVICE);
- }
- kfree(dma->out_map_array);
- }
-
- /* Free page cache for output */
- if (dma->in_page_array) {
- for (count = 0; count < dma->in_num_pages; count++) {
- flush_dcache_page(dma->in_page_array[count]);
- page_cache_release(dma->in_page_array[count]);
- }
- kfree(dma->in_page_array);
- }
-
- if (dma->out_page_array) {
- for (count = 0; count < dma->out_num_pages; count++) {
- if (!PageReserved(dma->out_page_array[count]))
- SetPageDirty(dma->out_page_array[count]);
- flush_dcache_page(dma->out_page_array[count]);
- page_cache_release(dma->out_page_array[count]);
- }
- kfree(dma->out_page_array);
- }
-
- /* Reset all the values */
- dma->in_page_array = NULL;
- dma->out_page_array = NULL;
- dma->in_num_pages = 0;
- dma->out_num_pages = 0;
- dma->in_map_array = NULL;
- dma->out_map_array = NULL;
- dma->in_map_num_entries = 0;
- dma->out_map_num_entries = 0;
- }
-
- sep->nr_dcb_creat = 0;
- sep->num_lli_tables_created = 0;
-
- return 0;
-}
-
-/**
- * sep_request_daemon_mmap - maps the shared area to user space
- * @filp: pointer to struct file
- * @vma: pointer to vm_area_struct
- *
- * Called by the kernel when the daemon attempts an mmap() syscall
- * using our handle.
- */
-static int sep_request_daemon_mmap(struct file *filp,
- struct vm_area_struct *vma)
-{
- struct sep_device *sep = filp->private_data;
- dma_addr_t bus_address;
- int error = 0;
-
- if ((vma->vm_end - vma->vm_start) > SEP_DRIVER_MMMAP_AREA_SIZE) {
- error = -EINVAL;
- goto end_function;
- }
-
- /* Get physical address */
- bus_address = sep->shared_bus;
-
- if (remap_pfn_range(vma, vma->vm_start, bus_address >> PAGE_SHIFT,
- vma->vm_end - vma->vm_start, vma->vm_page_prot)) {
-
- dev_warn(&sep->pdev->dev, "remap_page_range failed\n");
- error = -EAGAIN;
- goto end_function;
- }
-
-end_function:
- return error;
-}
-
-/**
- * sep_request_daemon_poll - poll implementation
- * @sep: struct sep_device * for current SEP device
- * @filp: struct file * for open file
- * @wait: poll_table * for poll
- *
- * Called when our device is part of a poll() or select() syscall
- */
-static unsigned int sep_request_daemon_poll(struct file *filp,
- poll_table *wait)
-{
- u32 mask = 0;
- /* GPR2 register */
- u32 retval2;
- unsigned long lck_flags;
- struct sep_device *sep = filp->private_data;
-
- poll_wait(filp, &sep->event_request_daemon, wait);
-
- dev_dbg(&sep->pdev->dev, "daemon poll: send_ct is %lx reply ct is %lx\n",
- sep->send_ct, sep->reply_ct);
-
- spin_lock_irqsave(&sep->snd_rply_lck, lck_flags);
- /* Check if the data is ready */
- if (sep->send_ct == sep->reply_ct) {
- spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
-
- retval2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
- dev_dbg(&sep->pdev->dev,
- "daemon poll: data check (GPR2) is %x\n", retval2);
-
- /* Check if PRINT request */
- if ((retval2 >> 30) & 0x1) {
- dev_dbg(&sep->pdev->dev, "daemon poll: PRINTF request in\n");
- mask |= POLLIN;
- goto end_function;
- }
- /* Check if NVS request */
- if (retval2 >> 31) {
- dev_dbg(&sep->pdev->dev, "daemon poll: NVS request in\n");
- mask |= POLLPRI | POLLWRNORM;
- }
- } else {
- spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
- dev_dbg(&sep->pdev->dev,
- "daemon poll: no reply received; returning 0\n");
- mask = 0;
- }
-end_function:
- return mask;
-}
-
-/**
- * sep_release - close a SEP device
- * @inode: inode of SEP device
- * @filp: file handle being closed
- *
- * Called on the final close of a SEP device.
- */
-static int sep_release(struct inode *inode, struct file *filp)
-{
- struct sep_device *sep = filp->private_data;
-
- dev_dbg(&sep->pdev->dev, "Release for pid %d\n", current->pid);
-
- mutex_lock(&sep->sep_mutex);
- /* Is this the process that has a transaction open?
- * If so, lets reset pid_doing_transaction to 0 and
- * clear the in use flags, and then wake up sep_event
- * so that other processes can do transactions
- */
- if (sep->pid_doing_transaction == current->pid) {
- clear_bit(SEP_MMAP_LOCK_BIT, &sep->in_use_flags);
- clear_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags);
- sep_free_dma_table_data_handler(sep);
- wake_up(&sep->event);
- sep->pid_doing_transaction = 0;
- }
-
- mutex_unlock(&sep->sep_mutex);
- return 0;
-}
-
-/**
- * sep_mmap - maps the shared area to user space
- * @filp: pointer to struct file
- * @vma: pointer to vm_area_struct
- *
- * Called on an mmap of our space via the normal SEP device
- */
-static int sep_mmap(struct file *filp, struct vm_area_struct *vma)
-{
- dma_addr_t bus_addr;
- struct sep_device *sep = filp->private_data;
- unsigned long error = 0;
-
- /* Set the transaction busy (own the device) */
- wait_event_interruptible(sep->event,
- test_and_set_bit(SEP_MMAP_LOCK_BIT,
- &sep->in_use_flags) == 0);
-
- if (signal_pending(current)) {
- error = -EINTR;
- goto end_function_with_error;
- }
- /*
- * The pid_doing_transaction indicates that this process
- * now owns the facilities to performa a transaction with
- * the SEP. While this process is performing a transaction,
- * no other process who has the SEP device open can perform
- * any transactions. This method allows more than one process
- * to have the device open at any given time, which provides
- * finer granularity for device utilization by multiple
- * processes.
- */
- mutex_lock(&sep->sep_mutex);
- sep->pid_doing_transaction = current->pid;
- mutex_unlock(&sep->sep_mutex);
-
- /* Zero the pools and the number of data pool alocation pointers */
- sep->data_pool_bytes_allocated = 0;
- sep->num_of_data_allocations = 0;
-
- /*
- * Check that the size of the mapped range is as the size of the message
- * shared area
- */
- if ((vma->vm_end - vma->vm_start) > SEP_DRIVER_MMMAP_AREA_SIZE) {
- error = -EINVAL;
- goto end_function_with_error;
- }
-
- dev_dbg(&sep->pdev->dev, "shared_addr is %p\n", sep->shared_addr);
-
- /* Get bus address */
- bus_addr = sep->shared_bus;
-
- if (remap_pfn_range(vma, vma->vm_start, bus_addr >> PAGE_SHIFT,
- vma->vm_end - vma->vm_start, vma->vm_page_prot)) {
- dev_warn(&sep->pdev->dev, "remap_page_range failed\n");
- error = -EAGAIN;
- goto end_function_with_error;
- }
- goto end_function;
-
-end_function_with_error:
- /* Clear the bit */
- clear_bit(SEP_MMAP_LOCK_BIT, &sep->in_use_flags);
- mutex_lock(&sep->sep_mutex);
- sep->pid_doing_transaction = 0;
- mutex_unlock(&sep->sep_mutex);
-
- /* Raise event for stuck contextes */
-
- wake_up(&sep->event);
-
-end_function:
- return error;
-}
-
-/**
- * sep_poll - poll handler
- * @filp: pointer to struct file
- * @wait: pointer to poll_table
- *
- * Called by the OS when the kernel is asked to do a poll on
- * a SEP file handle.
- */
-static unsigned int sep_poll(struct file *filp, poll_table *wait)
-{
- u32 mask = 0;
- u32 retval = 0;
- u32 retval2 = 0;
- unsigned long lck_flags;
-
- struct sep_device *sep = filp->private_data;
-
- /* Am I the process that owns the transaction? */
- mutex_lock(&sep->sep_mutex);
- if (current->pid != sep->pid_doing_transaction) {
- dev_dbg(&sep->pdev->dev, "poll; wrong pid\n");
- mask = POLLERR;
- mutex_unlock(&sep->sep_mutex);
- goto end_function;
- }
- mutex_unlock(&sep->sep_mutex);
-
- /* Check if send command or send_reply were activated previously */
- if (!test_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags)) {
- mask = POLLERR;
- goto end_function;
- }
-
- /* Add the event to the polling wait table */
- dev_dbg(&sep->pdev->dev, "poll: calling wait sep_event\n");
-
- poll_wait(filp, &sep->event, wait);
-
- dev_dbg(&sep->pdev->dev, "poll: send_ct is %lx reply ct is %lx\n",
- sep->send_ct, sep->reply_ct);
-
- /* Check if error occured during poll */
- retval2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
- if (retval2 != 0x0) {
- dev_warn(&sep->pdev->dev, "poll; poll error %x\n", retval2);
- mask |= POLLERR;
- goto end_function;
- }
-
- spin_lock_irqsave(&sep->snd_rply_lck, lck_flags);
-
- if (sep->send_ct == sep->reply_ct) {
- spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
- retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
- dev_dbg(&sep->pdev->dev, "poll: data ready check (GPR2) %x\n",
- retval);
-
- /* Check if printf request */
- if ((retval >> 30) & 0x1) {
- dev_dbg(&sep->pdev->dev, "poll: SEP printf request\n");
- wake_up(&sep->event_request_daemon);
- goto end_function;
- }
-
- /* Check if the this is SEP reply or request */
- if (retval >> 31) {
- dev_dbg(&sep->pdev->dev, "poll: SEP request\n");
- wake_up(&sep->event_request_daemon);
- } else {
- dev_dbg(&sep->pdev->dev, "poll: normal return\n");
- /* In case it is again by send_reply_comand */
- clear_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags);
- sep_dump_message(sep);
- dev_dbg(&sep->pdev->dev,
- "poll; SEP reply POLLIN | POLLRDNORM\n");
- mask |= POLLIN | POLLRDNORM;
- }
- } else {
- spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
- dev_dbg(&sep->pdev->dev,
- "poll; no reply received; returning mask of 0\n");
- mask = 0;
- }
-
-end_function:
- return mask;
-}
-
-/**
- * sep_time_address - address in SEP memory of time
- * @sep: SEP device we want the address from
- *
- * Return the address of the two dwords in memory used for time
- * setting.
- */
-static u32 *sep_time_address(struct sep_device *sep)
-{
- return sep->shared_addr + SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES;
-}
-
-/**
- * sep_set_time - set the SEP time
- * @sep: the SEP we are setting the time for
- *
- * Calculates time and sets it at the predefined address.
- * Called with the SEP mutex held.
- */
-static unsigned long sep_set_time(struct sep_device *sep)
-{
- struct timeval time;
- u32 *time_addr; /* Address of time as seen by the kernel */
-
-
- do_gettimeofday(&time);
-
- /* Set value in the SYSTEM MEMORY offset */
- time_addr = sep_time_address(sep);
-
- time_addr[0] = SEP_TIME_VAL_TOKEN;
- time_addr[1] = time.tv_sec;
-
- dev_dbg(&sep->pdev->dev, "time.tv_sec is %lu\n", time.tv_sec);
- dev_dbg(&sep->pdev->dev, "time_addr is %p\n", time_addr);
- dev_dbg(&sep->pdev->dev, "sep->shared_addr is %p\n", sep->shared_addr);
-
- return time.tv_sec;
-}
-
-/**
- * sep_set_caller_id_handler - insert caller id entry
- * @sep: SEP device
- * @arg: pointer to struct caller_id_struct
- *
- * Inserts the data into the caller id table. Note that this function
- * falls under the ioctl lock
- */
-static int sep_set_caller_id_handler(struct sep_device *sep, unsigned long arg)
-{
- void __user *hash;
- int error = 0;
- int i;
- struct caller_id_struct command_args;
-
- for (i = 0; i < SEP_CALLER_ID_TABLE_NUM_ENTRIES; i++) {
- if (sep->caller_id_table[i].pid == 0)
- break;
- }
-
- if (i == SEP_CALLER_ID_TABLE_NUM_ENTRIES) {
- dev_dbg(&sep->pdev->dev, "no more caller id entries left\n");
- dev_dbg(&sep->pdev->dev, "maximum number is %d\n",
- SEP_CALLER_ID_TABLE_NUM_ENTRIES);
- error = -EUSERS;
- goto end_function;
- }
-
- /* Copy the data */
- if (copy_from_user(&command_args, (void __user *)arg,
- sizeof(command_args))) {
- error = -EFAULT;
- goto end_function;
- }
-
- hash = (void __user *)(unsigned long)command_args.callerIdAddress;
-
- if (!command_args.pid || !command_args.callerIdSizeInBytes) {
- error = -EINVAL;
- goto end_function;
- }
-
- dev_dbg(&sep->pdev->dev, "pid is %x\n", command_args.pid);
- dev_dbg(&sep->pdev->dev, "callerIdSizeInBytes is %x\n",
- command_args.callerIdSizeInBytes);
-
- if (command_args.callerIdSizeInBytes >
- SEP_CALLER_ID_HASH_SIZE_IN_BYTES) {
- error = -EMSGSIZE;
- goto end_function;
- }
-
- sep->caller_id_table[i].pid = command_args.pid;
-
- if (copy_from_user(sep->caller_id_table[i].callerIdHash,
- hash, command_args.callerIdSizeInBytes))
- error = -EFAULT;
-end_function:
- return error;
-}
-
-/**
- * sep_set_current_caller_id - set the caller id
- * @sep: pointer to struct_sep_device
- *
- * Set the caller ID (if it exists) to the SEP. Note that this
- * function falls under the ioctl lock
- */
-static int sep_set_current_caller_id(struct sep_device *sep)
-{
- int i;
- u32 *hash_buf_ptr;
-
- /* Zero the previous value */
- memset(sep->shared_addr + SEP_CALLER_ID_OFFSET_BYTES,
- 0, SEP_CALLER_ID_HASH_SIZE_IN_BYTES);
-
- for (i = 0; i < SEP_CALLER_ID_TABLE_NUM_ENTRIES; i++) {
- if (sep->caller_id_table[i].pid == current->pid) {
- dev_dbg(&sep->pdev->dev, "Caller Id found\n");
-
- memcpy(sep->shared_addr + SEP_CALLER_ID_OFFSET_BYTES,
- (void *)(sep->caller_id_table[i].callerIdHash),
- SEP_CALLER_ID_HASH_SIZE_IN_BYTES);
- break;
- }
- }
- /* Ensure data is in little endian */
- hash_buf_ptr = (u32 *)sep->shared_addr +
- SEP_CALLER_ID_OFFSET_BYTES;
-
- for (i = 0; i < SEP_CALLER_ID_HASH_SIZE_IN_WORDS; i++)
- hash_buf_ptr[i] = cpu_to_le32(hash_buf_ptr[i]);
-
- return 0;
-}
-
-/**
- * sep_send_command_handler - kick off a command
- * @sep: SEP being signalled
- *
- * This function raises interrupt to SEP that signals that is has a new
- * command from the host
- *
- * Note that this function does fall under the ioctl lock
- */
-static int sep_send_command_handler(struct sep_device *sep)
-{
- unsigned long lck_flags;
- int error = 0;
-
- if (test_and_set_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags)) {
- error = -EPROTO;
- goto end_function;
- }
- sep_set_time(sep);
-
- sep_set_current_caller_id(sep);
-
- sep_dump_message(sep);
-
- /* Update counter */
- spin_lock_irqsave(&sep->snd_rply_lck, lck_flags);
- sep->send_ct++;
- spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
-
- dev_dbg(&sep->pdev->dev,
- "sep_send_command_handler send_ct %lx reply_ct %lx\n",
- sep->send_ct, sep->reply_ct);
-
- /* Send interrupt to SEP */
- sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x2);
-
-end_function:
- return error;
-}
-
-/**
- * sep_allocate_data_pool_memory_handler -allocate pool memory
- * @sep: pointer to struct sep_device
- * @arg: pointer to struct alloc_struct
- *
- * This function handles the allocate data pool memory request
- * This function returns calculates the bus address of the
- * allocated memory, and the offset of this area from the mapped address.
- * Therefore, the FVOs in user space can calculate the exact virtual
- * address of this allocated memory
- */
-static int sep_allocate_data_pool_memory_handler(struct sep_device *sep,
- unsigned long arg)
-{
- int error = 0;
- struct alloc_struct command_args;
-
- /* Holds the allocated buffer address in the system memory pool */
- u32 *token_addr;
-
- if (copy_from_user(&command_args, (void __user *)arg,
- sizeof(struct alloc_struct))) {
- error = -EFAULT;
- goto end_function;
- }
-
- /* Allocate memory */
- if ((sep->data_pool_bytes_allocated + command_args.num_bytes) >
- SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) {
- error = -ENOMEM;
- goto end_function;
- }
-
- dev_dbg(&sep->pdev->dev,
- "data pool bytes_allocated: %x\n", (int)sep->data_pool_bytes_allocated);
- dev_dbg(&sep->pdev->dev,
- "offset: %x\n", SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES);
- /* Set the virtual and bus address */
- command_args.offset = SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES +
- sep->data_pool_bytes_allocated;
-
- /* Place in the shared area that is known by the SEP */
- token_addr = (u32 *)(sep->shared_addr +
- SEP_DRIVER_DATA_POOL_ALLOCATION_OFFSET_IN_BYTES +
- (sep->num_of_data_allocations)*2*sizeof(u32));
-
- token_addr[0] = SEP_DATA_POOL_POINTERS_VAL_TOKEN;
- token_addr[1] = (u32)sep->shared_bus +
- SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES +
- sep->data_pool_bytes_allocated;
-
- /* Write the memory back to the user space */
- error = copy_to_user((void *)arg, (void *)&command_args,
- sizeof(struct alloc_struct));
- if (error) {
- error = -EFAULT;
- goto end_function;
- }
-
- /* Update the allocation */
- sep->data_pool_bytes_allocated += command_args.num_bytes;
- sep->num_of_data_allocations += 1;
-
-end_function:
- return error;
-}
-
-/**
- * sep_lock_kernel_pages - map kernel pages for DMA
- * @sep: pointer to struct sep_device
- * @kernel_virt_addr: address of data buffer in kernel
- * @data_size: size of data
- * @lli_array_ptr: lli array
- * @in_out_flag: input into device or output from device
- *
- * This function locks all the physical pages of the kernel virtual buffer
- * and construct a basic lli array, where each entry holds the physical
- * page address and the size that application data holds in this page
- * This function is used only during kernel crypto mod calls from within
- * the kernel (when ioctl is not used)
- */
-static int sep_lock_kernel_pages(struct sep_device *sep,
- unsigned long kernel_virt_addr,
- u32 data_size,
- struct sep_lli_entry **lli_array_ptr,
- int in_out_flag)
-
-{
- int error = 0;
- /* Array of lli */
- struct sep_lli_entry *lli_array;
- /* Map array */
- struct sep_dma_map *map_array;
-
- dev_dbg(&sep->pdev->dev, "lock kernel pages kernel_virt_addr is %08lx\n",
- (unsigned long)kernel_virt_addr);
- dev_dbg(&sep->pdev->dev, "data_size is %x\n", data_size);
-
- lli_array = kmalloc(sizeof(struct sep_lli_entry), GFP_ATOMIC);
- if (!lli_array) {
- error = -ENOMEM;
- goto end_function;
- }
- map_array = kmalloc(sizeof(struct sep_dma_map), GFP_ATOMIC);
- if (!map_array) {
- error = -ENOMEM;
- goto end_function_with_error;
- }
-
- map_array[0].dma_addr =
- dma_map_single(&sep->pdev->dev, (void *)kernel_virt_addr,
- data_size, DMA_BIDIRECTIONAL);
- map_array[0].size = data_size;
-
-
- /*
- * Set the start address of the first page - app data may start not at
- * the beginning of the page
- */
- lli_array[0].bus_address = (u32)map_array[0].dma_addr;
- lli_array[0].block_size = map_array[0].size;
-
- dev_dbg(&sep->pdev->dev,
- "lli_array[0].bus_address is %08lx, lli_array[0].block_size is %x\n",
- (unsigned long)lli_array[0].bus_address,
- lli_array[0].block_size);
-
- /* Set the output parameters */
- if (in_out_flag == SEP_DRIVER_IN_FLAG) {
- *lli_array_ptr = lli_array;
- sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = 1;
- sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = NULL;
- sep->dma_res_arr[sep->nr_dcb_creat].in_map_array = map_array;
- sep->dma_res_arr[sep->nr_dcb_creat].in_map_num_entries = 1;
- } else {
- *lli_array_ptr = lli_array;
- sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages = 1;
- sep->dma_res_arr[sep->nr_dcb_creat].out_page_array = NULL;
- sep->dma_res_arr[sep->nr_dcb_creat].out_map_array = map_array;
- sep->dma_res_arr[sep->nr_dcb_creat].out_map_num_entries = 1;
- }
- goto end_function;
-
-end_function_with_error:
- kfree(lli_array);
-
-end_function:
- return error;
-}
-
-/**
- * sep_lock_user_pages - lock and map user pages for DMA
- * @sep: pointer to struct sep_device
- * @app_virt_addr: user memory data buffer
- * @data_size: size of data buffer
- * @lli_array_ptr: lli array
- * @in_out_flag: input or output to device
- *
- * This function locks all the physical pages of the application
- * virtual buffer and construct a basic lli array, where each entry
- * holds the physical page address and the size that application
- * data holds in this physical pages
- */
-static int sep_lock_user_pages(struct sep_device *sep,
- u32 app_virt_addr,
- u32 data_size,
- struct sep_lli_entry **lli_array_ptr,
- int in_out_flag)
-
-{
- int error = 0;
- u32 count;
- int result;
- /* The the page of the end address of the user space buffer */
- u32 end_page;
- /* The page of the start address of the user space buffer */
- u32 start_page;
- /* The range in pages */
- u32 num_pages;
- /* Array of pointers to page */
- struct page **page_array;
- /* Array of lli */
- struct sep_lli_entry *lli_array;
- /* Map array */
- struct sep_dma_map *map_array;
- /* Direction of the DMA mapping for locked pages */
- enum dma_data_direction dir;
-
- /* Set start and end pages and num pages */
- end_page = (app_virt_addr + data_size - 1) >> PAGE_SHIFT;
- start_page = app_virt_addr >> PAGE_SHIFT;
- num_pages = end_page - start_page + 1;
-
- dev_dbg(&sep->pdev->dev, "lock user pages app_virt_addr is %x\n", app_virt_addr);
- dev_dbg(&sep->pdev->dev, "data_size is %x\n", data_size);
- dev_dbg(&sep->pdev->dev, "start_page is %x\n", start_page);
- dev_dbg(&sep->pdev->dev, "end_page is %x\n", end_page);
- dev_dbg(&sep->pdev->dev, "num_pages is %x\n", num_pages);
-
- /* Allocate array of pages structure pointers */
- page_array = kmalloc(sizeof(struct page *) * num_pages, GFP_ATOMIC);
- if (!page_array) {
- error = -ENOMEM;
- goto end_function;
- }
- map_array = kmalloc(sizeof(struct sep_dma_map) * num_pages, GFP_ATOMIC);
- if (!map_array) {
- dev_warn(&sep->pdev->dev, "kmalloc for map_array failed\n");
- error = -ENOMEM;
- goto end_function_with_error1;
- }
-
- lli_array = kmalloc(sizeof(struct sep_lli_entry) * num_pages,
- GFP_ATOMIC);
-
- if (!lli_array) {
- dev_warn(&sep->pdev->dev, "kmalloc for lli_array failed\n");
- error = -ENOMEM;
- goto end_function_with_error2;
- }
-
- /* Convert the application virtual address into a set of physical */
- down_read(¤t->mm->mmap_sem);
- result = get_user_pages(current, current->mm, app_virt_addr,
- num_pages,
- ((in_out_flag == SEP_DRIVER_IN_FLAG) ? 0 : 1),
- 0, page_array, NULL);
-
- up_read(¤t->mm->mmap_sem);
-
- /* Check the number of pages locked - if not all then exit with error */
- if (result != num_pages) {
- dev_warn(&sep->pdev->dev,
- "not all pages locked by get_user_pages\n");
- error = -ENOMEM;
- goto end_function_with_error3;
- }
-
- dev_dbg(&sep->pdev->dev, "get_user_pages succeeded\n");
-
- /* Set direction */
- if (in_out_flag == SEP_DRIVER_IN_FLAG)
- dir = DMA_TO_DEVICE;
- else
- dir = DMA_FROM_DEVICE;
-
- /*
- * Fill the array using page array data and
- * map the pages - this action will also flush the cache as needed
- */
- for (count = 0; count < num_pages; count++) {
- /* Fill the map array */
- map_array[count].dma_addr =
- dma_map_page(&sep->pdev->dev, page_array[count],
- 0, PAGE_SIZE, /*dir*/DMA_BIDIRECTIONAL);
-
- map_array[count].size = PAGE_SIZE;
-
- /* Fill the lli array entry */
- lli_array[count].bus_address = (u32)map_array[count].dma_addr;
- lli_array[count].block_size = PAGE_SIZE;
-
- dev_warn(&sep->pdev->dev, "lli_array[%x].bus_address is %08lx, lli_array[%x].block_size is %x\n",
- count, (unsigned long)lli_array[count].bus_address,
- count, lli_array[count].block_size);
- }
-
- /* Check the offset for the first page */
- lli_array[0].bus_address =
- lli_array[0].bus_address + (app_virt_addr & (~PAGE_MASK));
-
- /* Check that not all the data is in the first page only */
- if ((PAGE_SIZE - (app_virt_addr & (~PAGE_MASK))) >= data_size)
- lli_array[0].block_size = data_size;
- else
- lli_array[0].block_size =
- PAGE_SIZE - (app_virt_addr & (~PAGE_MASK));
-
- dev_dbg(&sep->pdev->dev,
- "lli_array[0].bus_address is %08lx, lli_array[0].block_size is %x\n",
- (unsigned long)lli_array[count].bus_address,
- lli_array[count].block_size);
-
- /* Check the size of the last page */
- if (num_pages > 1) {
- lli_array[num_pages - 1].block_size =
- (app_virt_addr + data_size) & (~PAGE_MASK);
-
- dev_warn(&sep->pdev->dev,
- "lli_array[%x].bus_address is %08lx, lli_array[%x].block_size is %x\n",
- num_pages - 1,
- (unsigned long)lli_array[count].bus_address,
- num_pages - 1,
- lli_array[count].block_size);
- }
-
- /* Set output params acording to the in_out flag */
- if (in_out_flag == SEP_DRIVER_IN_FLAG) {
- *lli_array_ptr = lli_array;
- sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = num_pages;
- sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = page_array;
- sep->dma_res_arr[sep->nr_dcb_creat].in_map_array = map_array;
- sep->dma_res_arr[sep->nr_dcb_creat].in_map_num_entries =
- num_pages;
- } else {
- *lli_array_ptr = lli_array;
- sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages = num_pages;
- sep->dma_res_arr[sep->nr_dcb_creat].out_page_array =
- page_array;
- sep->dma_res_arr[sep->nr_dcb_creat].out_map_array = map_array;
- sep->dma_res_arr[sep->nr_dcb_creat].out_map_num_entries =
- num_pages;
- }
- goto end_function;
-
-end_function_with_error3:
- /* Free lli array */
- kfree(lli_array);
-
-end_function_with_error2:
- kfree(map_array);
-
-end_function_with_error1:
- /* Free page array */
- kfree(page_array);
-
-end_function:
- return error;
-}
-
-/**
- * u32 sep_calculate_lli_table_max_size - size the LLI table
- * @sep: pointer to struct sep_device
- * @lli_in_array_ptr
- * @num_array_entries
- * @last_table_flag
- *
- * This function calculates the size of data that can be inserted into
- * the lli table from this array, such that either the table is full
- * (all entries are entered), or there are no more entries in the
- * lli array
- */
-static u32 sep_calculate_lli_table_max_size(struct sep_device *sep,
- struct sep_lli_entry *lli_in_array_ptr,
- u32 num_array_entries,
- u32 *last_table_flag)
-{
- u32 counter;
- /* Table data size */
- u32 table_data_size = 0;
- /* Data size for the next table */
- u32 next_table_data_size;
-
- *last_table_flag = 0;
-
- /*
- * Calculate the data in the out lli table till we fill the whole
- * table or till the data has ended
- */
- for (counter = 0;
- (counter < (SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP - 1)) &&
- (counter < num_array_entries); counter++)
- table_data_size += lli_in_array_ptr[counter].block_size;
-
- /*
- * Check if we reached the last entry,
- * meaning this ia the last table to build,
- * and no need to check the block alignment
- */
- if (counter == num_array_entries) {
- /* Set the last table flag */
- *last_table_flag = 1;
- goto end_function;
- }
-
- /*
- * Calculate the data size of the next table.
- * Stop if no entries left or if data size is more the DMA restriction
- */
- next_table_data_size = 0;
- for (; counter < num_array_entries; counter++) {
- next_table_data_size += lli_in_array_ptr[counter].block_size;
- if (next_table_data_size >= SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE)
- break;
- }
-
- /*
- * Check if the next table data size is less then DMA rstriction.
- * if it is - recalculate the current table size, so that the next
- * table data size will be adaquete for DMA
- */
- if (next_table_data_size &&
- next_table_data_size < SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE)
-
- table_data_size -= (SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE -
- next_table_data_size);
-
-end_function:
- return table_data_size;
-}
-
-/**
- * sep_build_lli_table - build an lli array for the given table
- * @sep: pointer to struct sep_device
- * @lli_array_ptr: pointer to lli array
- * @lli_table_ptr: pointer to lli table
- * @num_processed_entries_ptr: pointer to number of entries
- * @num_table_entries_ptr: pointer to number of tables
- * @table_data_size: total data size
- *
- * Builds ant lli table from the lli_array according to
- * the given size of data
- */
-static void sep_build_lli_table(struct sep_device *sep,
- struct sep_lli_entry *lli_array_ptr,
- struct sep_lli_entry *lli_table_ptr,
- u32 *num_processed_entries_ptr,
- u32 *num_table_entries_ptr,
- u32 table_data_size)
-{
- /* Current table data size */
- u32 curr_table_data_size;
- /* Counter of lli array entry */
- u32 array_counter;
-
- /* Init currrent table data size and lli array entry counter */
- curr_table_data_size = 0;
- array_counter = 0;
- *num_table_entries_ptr = 1;
-
- dev_dbg(&sep->pdev->dev, "build lli table table_data_size is %x\n", table_data_size);
-
- /* Fill the table till table size reaches the needed amount */
- while (curr_table_data_size < table_data_size) {
- /* Update the number of entries in table */
- (*num_table_entries_ptr)++;
-
- lli_table_ptr->bus_address =
- cpu_to_le32(lli_array_ptr[array_counter].bus_address);
-
- lli_table_ptr->block_size =
- cpu_to_le32(lli_array_ptr[array_counter].block_size);
-
- curr_table_data_size += lli_array_ptr[array_counter].block_size;
-
- dev_dbg(&sep->pdev->dev, "lli_table_ptr is %p\n",
- lli_table_ptr);
- dev_dbg(&sep->pdev->dev, "lli_table_ptr->bus_address is %08lx\n",
- (unsigned long)lli_table_ptr->bus_address);
- dev_dbg(&sep->pdev->dev, "lli_table_ptr->block_size is %x\n",
- lli_table_ptr->block_size);
-
- /* Check for overflow of the table data */
- if (curr_table_data_size > table_data_size) {
- dev_dbg(&sep->pdev->dev,
- "curr_table_data_size too large\n");
-
- /* Update the size of block in the table */
- lli_table_ptr->block_size -=
- cpu_to_le32((curr_table_data_size - table_data_size));
-
- /* Update the physical address in the lli array */
- lli_array_ptr[array_counter].bus_address +=
- cpu_to_le32(lli_table_ptr->block_size);
-
- /* Update the block size left in the lli array */
- lli_array_ptr[array_counter].block_size =
- (curr_table_data_size - table_data_size);
- } else
- /* Advance to the next entry in the lli_array */
- array_counter++;
-
- dev_dbg(&sep->pdev->dev,
- "lli_table_ptr->bus_address is %08lx\n",
- (unsigned long)lli_table_ptr->bus_address);
- dev_dbg(&sep->pdev->dev,
- "lli_table_ptr->block_size is %x\n",
- lli_table_ptr->block_size);
-
- /* Move to the next entry in table */
- lli_table_ptr++;
- }
-
- /* Set the info entry to default */
- lli_table_ptr->bus_address = 0xffffffff;
- lli_table_ptr->block_size = 0;
-
- /* Set the output parameter */
- *num_processed_entries_ptr += array_counter;
-
-}
-
-/**
- * sep_shared_area_virt_to_bus - map shared area to bus address
- * @sep: pointer to struct sep_device
- * @virt_address: virtual address to convert
- *
- * This functions returns the physical address inside shared area according
- * to the virtual address. It can be either on the externa RAM device
- * (ioremapped), or on the system RAM
- * This implementation is for the external RAM
- */
-static dma_addr_t sep_shared_area_virt_to_bus(struct sep_device *sep,
- void *virt_address)
-{
- dev_dbg(&sep->pdev->dev, "sh virt to phys v %p\n", virt_address);
- dev_dbg(&sep->pdev->dev, "sh virt to phys p %08lx\n",
- (unsigned long)
- sep->shared_bus + (virt_address - sep->shared_addr));
-
- return sep->shared_bus + (size_t)(virt_address - sep->shared_addr);
-}
-
-/**
- * sep_shared_area_bus_to_virt - map shared area bus address to kernel
- * @sep: pointer to struct sep_device
- * @bus_address: bus address to convert
- *
- * This functions returns the virtual address inside shared area
- * according to the physical address. It can be either on the
- * externa RAM device (ioremapped), or on the system RAM
- * This implementation is for the external RAM
- */
-static void *sep_shared_area_bus_to_virt(struct sep_device *sep,
- dma_addr_t bus_address)
-{
- dev_dbg(&sep->pdev->dev, "shared bus to virt b=%lx v=%lx\n",
- (unsigned long)bus_address, (unsigned long)(sep->shared_addr +
- (size_t)(bus_address - sep->shared_bus)));
-
- return sep->shared_addr + (size_t)(bus_address - sep->shared_bus);
-}
-
-/**
- * sep_debug_print_lli_tables - dump LLI table
- * @sep: pointer to struct sep_device
- * @lli_table_ptr: pointer to sep_lli_entry
- * @num_table_entries: number of entries
- * @table_data_size: total data size
- *
- * Walk the the list of the print created tables and print all the data
- */
-static void sep_debug_print_lli_tables(struct sep_device *sep,
- struct sep_lli_entry *lli_table_ptr,
- unsigned long num_table_entries,
- unsigned long table_data_size)
-{
- unsigned long table_count = 1;
- unsigned long entries_count = 0;
-
- dev_dbg(&sep->pdev->dev, "sep_debug_print_lli_tables start\n");
-
- while ((unsigned long) lli_table_ptr->bus_address != 0xffffffff) {
- dev_dbg(&sep->pdev->dev,
- "lli table %08lx, table_data_size is %lu\n",
- table_count, table_data_size);
- dev_dbg(&sep->pdev->dev, "num_table_entries is %lu\n",
- num_table_entries);
-
- /* Print entries of the table (without info entry) */
- for (entries_count = 0; entries_count < num_table_entries;
- entries_count++, lli_table_ptr++) {
-
- dev_dbg(&sep->pdev->dev,
- "lli_table_ptr address is %08lx\n",
- (unsigned long) lli_table_ptr);
-
- dev_dbg(&sep->pdev->dev,
- "phys address is %08lx block size is %x\n",
- (unsigned long)lli_table_ptr->bus_address,
- lli_table_ptr->block_size);
- }
- /* Point to the info entry */
- lli_table_ptr--;
-
- dev_dbg(&sep->pdev->dev,
- "phys lli_table_ptr->block_size is %x\n",
- lli_table_ptr->block_size);
-
- dev_dbg(&sep->pdev->dev,
- "phys lli_table_ptr->physical_address is %08lu\n",
- (unsigned long)lli_table_ptr->bus_address);
-
-
- table_data_size = lli_table_ptr->block_size & 0xffffff;
- num_table_entries = (lli_table_ptr->block_size >> 24) & 0xff;
-
- dev_dbg(&sep->pdev->dev,
- "phys table_data_size is %lu num_table_entries is"
- " %lu bus_address is%lu\n", table_data_size,
- num_table_entries, (unsigned long)lli_table_ptr->bus_address);
-
- if ((unsigned long)lli_table_ptr->bus_address != 0xffffffff)
- lli_table_ptr = (struct sep_lli_entry *)
- sep_shared_bus_to_virt(sep,
- (unsigned long)lli_table_ptr->bus_address);
-
- table_count++;
- }
- dev_dbg(&sep->pdev->dev, "sep_debug_print_lli_tables end\n");
-}
-
-
-/**
- * sep_prepare_empty_lli_table - create a blank LLI table
- * @sep: pointer to struct sep_device
- * @lli_table_addr_ptr: pointer to lli table
- * @num_entries_ptr: pointer to number of entries
- * @table_data_size_ptr: point to table data size
- *
- * This function creates empty lli tables when there is no data
- */
-static void sep_prepare_empty_lli_table(struct sep_device *sep,
- dma_addr_t *lli_table_addr_ptr,
- u32 *num_entries_ptr,
- u32 *table_data_size_ptr)
-{
- struct sep_lli_entry *lli_table_ptr;
-
- /* Find the area for new table */
- lli_table_ptr =
- (struct sep_lli_entry *)(sep->shared_addr +
- SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
- sep->num_lli_tables_created * sizeof(struct sep_lli_entry) *
- SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP);
-
- lli_table_ptr->bus_address = 0;
- lli_table_ptr->block_size = 0;
-
- lli_table_ptr++;
- lli_table_ptr->bus_address = 0xFFFFFFFF;
- lli_table_ptr->block_size = 0;
-
- /* Set the output parameter value */
- *lli_table_addr_ptr = sep->shared_bus +
- SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
- sep->num_lli_tables_created *
- sizeof(struct sep_lli_entry) *
- SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP;
-
- /* Set the num of entries and table data size for empty table */
- *num_entries_ptr = 2;
- *table_data_size_ptr = 0;
-
- /* Update the number of created tables */
- sep->num_lli_tables_created++;
-}
-
-/**
- * sep_prepare_input_dma_table - prepare input DMA mappings
- * @sep: pointer to struct sep_device
- * @data_size:
- * @block_size:
- * @lli_table_ptr:
- * @num_entries_ptr:
- * @table_data_size_ptr:
- * @is_kva: set for kernel data (kernel cryptio call)
- *
- * This function prepares only input DMA table for synhronic symmetric
- * operations (HASH)
- * Note that all bus addresses that are passed to the SEP
- * are in 32 bit format; the SEP is a 32 bit device
- */
-static int sep_prepare_input_dma_table(struct sep_device *sep,
- unsigned long app_virt_addr,
- u32 data_size,
- u32 block_size,
- dma_addr_t *lli_table_ptr,
- u32 *num_entries_ptr,
- u32 *table_data_size_ptr,
- bool is_kva)
-{
- int error = 0;
- /* Pointer to the info entry of the table - the last entry */
- struct sep_lli_entry *info_entry_ptr;
- /* Array of pointers to page */
- struct sep_lli_entry *lli_array_ptr;
- /* Points to the first entry to be processed in the lli_in_array */
- u32 current_entry = 0;
- /* Num entries in the virtual buffer */
- u32 sep_lli_entries = 0;
- /* Lli table pointer */
- struct sep_lli_entry *in_lli_table_ptr;
- /* The total data in one table */
- u32 table_data_size = 0;
- /* Flag for last table */
- u32 last_table_flag = 0;
- /* Number of entries in lli table */
- u32 num_entries_in_table = 0;
- /* Next table address */
- void *lli_table_alloc_addr = 0;
-
- dev_dbg(&sep->pdev->dev, "prepare intput dma table data_size is %x\n", data_size);
- dev_dbg(&sep->pdev->dev, "block_size is %x\n", block_size);
-
- /* Initialize the pages pointers */
- sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = NULL;
- sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = 0;
-
- /* Set the kernel address for first table to be allocated */
- lli_table_alloc_addr = (void *)(sep->shared_addr +
- SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
- sep->num_lli_tables_created * sizeof(struct sep_lli_entry) *
- SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP);
-
- if (data_size == 0) {
- /* Special case - create meptu table - 2 entries, zero data */
- sep_prepare_empty_lli_table(sep, lli_table_ptr,
- num_entries_ptr, table_data_size_ptr);
- goto update_dcb_counter;
- }
-
- /* Check if the pages are in Kernel Virtual Address layout */
- if (is_kva == true)
- /* Lock the pages in the kernel */
- error = sep_lock_kernel_pages(sep, app_virt_addr,
- data_size, &lli_array_ptr, SEP_DRIVER_IN_FLAG);
- else
- /*
- * Lock the pages of the user buffer
- * and translate them to pages
- */
- error = sep_lock_user_pages(sep, app_virt_addr,
- data_size, &lli_array_ptr, SEP_DRIVER_IN_FLAG);
-
- if (error)
- goto end_function;
-
- dev_dbg(&sep->pdev->dev, "output sep_in_num_pages is %x\n",
- sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages);
-
- current_entry = 0;
- info_entry_ptr = NULL;
-
- sep_lli_entries = sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages;
-
- /* Loop till all the entries in in array are not processed */
- while (current_entry < sep_lli_entries) {
-
- /* Set the new input and output tables */
- in_lli_table_ptr =
- (struct sep_lli_entry *)lli_table_alloc_addr;
-
- lli_table_alloc_addr += sizeof(struct sep_lli_entry) *
- SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP;
-
- if (lli_table_alloc_addr >
- ((void *)sep->shared_addr +
- SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
- SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES)) {
-
- error = -ENOMEM;
- goto end_function_error;
-
- }
-
- /* Update the number of created tables */
- sep->num_lli_tables_created++;
-
- /* Calculate the maximum size of data for input table */
- table_data_size = sep_calculate_lli_table_max_size(sep,
- &lli_array_ptr[current_entry],
- (sep_lli_entries - current_entry),
- &last_table_flag);
-
- /*
- * If this is not the last table -
- * then allign it to the block size
- */
- if (!last_table_flag)
- table_data_size =
- (table_data_size / block_size) * block_size;
-
- dev_dbg(&sep->pdev->dev, "output table_data_size is %x\n",
- table_data_size);
-
- /* Construct input lli table */
- sep_build_lli_table(sep, &lli_array_ptr[current_entry],
- in_lli_table_ptr,
- ¤t_entry, &num_entries_in_table, table_data_size);
-
- if (info_entry_ptr == NULL) {
-
- /* Set the output parameters to physical addresses */
- *lli_table_ptr = sep_shared_area_virt_to_bus(sep,
- in_lli_table_ptr);
- *num_entries_ptr = num_entries_in_table;
- *table_data_size_ptr = table_data_size;
-
- dev_dbg(&sep->pdev->dev,
- "output lli_table_in_ptr is %08lx\n",
- (unsigned long)*lli_table_ptr);
-
- } else {
- /* Update the info entry of the previous in table */
- info_entry_ptr->bus_address =
- sep_shared_area_virt_to_bus(sep,
- in_lli_table_ptr);
- info_entry_ptr->block_size =
- ((num_entries_in_table) << 24) |
- (table_data_size);
- }
- /* Save the pointer to the info entry of the current tables */
- info_entry_ptr = in_lli_table_ptr + num_entries_in_table - 1;
- }
- /* Print input tables */
- sep_debug_print_lli_tables(sep, (struct sep_lli_entry *)
- sep_shared_area_bus_to_virt(sep, *lli_table_ptr),
- *num_entries_ptr, *table_data_size_ptr);
- /* The array of the pages */
- kfree(lli_array_ptr);
-
-update_dcb_counter:
- /* Update DCB counter */
- sep->nr_dcb_creat++;
- goto end_function;
-
-end_function_error:
- /* Free all the allocated resources */
- kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_map_array);
- kfree(lli_array_ptr);
- kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_page_array);
-
-end_function:
- return error;
-
-}
-/**
- * sep_construct_dma_tables_from_lli - prepare AES/DES mappings
- * @sep: pointer to struct sep_device
- * @lli_in_array:
- * @sep_in_lli_entries:
- * @lli_out_array:
- * @sep_out_lli_entries
- * @block_size
- * @lli_table_in_ptr
- * @lli_table_out_ptr
- * @in_num_entries_ptr
- * @out_num_entries_ptr
- * @table_data_size_ptr
- *
- * This function creates the input and output DMA tables for
- * symmetric operations (AES/DES) according to the block
- * size from LLI arays
- * Note that all bus addresses that are passed to the SEP
- * are in 32 bit format; the SEP is a 32 bit device
- */
-static int sep_construct_dma_tables_from_lli(
- struct sep_device *sep,
- struct sep_lli_entry *lli_in_array,
- u32 sep_in_lli_entries,
- struct sep_lli_entry *lli_out_array,
- u32 sep_out_lli_entries,
- u32 block_size,
- dma_addr_t *lli_table_in_ptr,
- dma_addr_t *lli_table_out_ptr,
- u32 *in_num_entries_ptr,
- u32 *out_num_entries_ptr,
- u32 *table_data_size_ptr)
-{
- /* Points to the area where next lli table can be allocated */
- void *lli_table_alloc_addr = 0;
- /* Input lli table */
- struct sep_lli_entry *in_lli_table_ptr = NULL;
- /* Output lli table */
- struct sep_lli_entry *out_lli_table_ptr = NULL;
- /* Pointer to the info entry of the table - the last entry */
- struct sep_lli_entry *info_in_entry_ptr = NULL;
- /* Pointer to the info entry of the table - the last entry */
- struct sep_lli_entry *info_out_entry_ptr = NULL;
- /* Points to the first entry to be processed in the lli_in_array */
- u32 current_in_entry = 0;
- /* Points to the first entry to be processed in the lli_out_array */
- u32 current_out_entry = 0;
- /* Max size of the input table */
- u32 in_table_data_size = 0;
- /* Max size of the output table */
- u32 out_table_data_size = 0;
- /* Flag te signifies if this is the last tables build */
- u32 last_table_flag = 0;
- /* The data size that should be in table */
- u32 table_data_size = 0;
- /* Number of etnries in the input table */
- u32 num_entries_in_table = 0;
- /* Number of etnries in the output table */
- u32 num_entries_out_table = 0;
-
- /* Initiate to point after the message area */
- lli_table_alloc_addr = (void *)(sep->shared_addr +
- SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
- (sep->num_lli_tables_created *
- (sizeof(struct sep_lli_entry) *
- SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP)));
-
- /* Loop till all the entries in in array are not processed */
- while (current_in_entry < sep_in_lli_entries) {
- /* Set the new input and output tables */
- in_lli_table_ptr =
- (struct sep_lli_entry *)lli_table_alloc_addr;
-
- lli_table_alloc_addr += sizeof(struct sep_lli_entry) *
- SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP;
-
- /* Set the first output tables */
- out_lli_table_ptr =
- (struct sep_lli_entry *)lli_table_alloc_addr;
-
- /* Check if the DMA table area limit was overrun */
- if ((lli_table_alloc_addr + sizeof(struct sep_lli_entry) *
- SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP) >
- ((void *)sep->shared_addr +
- SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
- SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES)) {
-
- dev_warn(&sep->pdev->dev, "dma table limit overrun\n");
- return -ENOMEM;
- }
-
- /* Update the number of the lli tables created */
- sep->num_lli_tables_created += 2;
-
- lli_table_alloc_addr += sizeof(struct sep_lli_entry) *
- SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP;
-
- /* Calculate the maximum size of data for input table */
- in_table_data_size =
- sep_calculate_lli_table_max_size(sep,
- &lli_in_array[current_in_entry],
- (sep_in_lli_entries - current_in_entry),
- &last_table_flag);
-
- /* Calculate the maximum size of data for output table */
- out_table_data_size =
- sep_calculate_lli_table_max_size(sep,
- &lli_out_array[current_out_entry],
- (sep_out_lli_entries - current_out_entry),
- &last_table_flag);
-
- dev_dbg(&sep->pdev->dev,
- "construct tables from lli in_table_data_size is %x\n",
- in_table_data_size);
-
- dev_dbg(&sep->pdev->dev,
- "construct tables from lli out_table_data_size is %x\n",
- out_table_data_size);
-
- table_data_size = in_table_data_size;
-
- if (!last_table_flag) {
- /*
- * If this is not the last table,
- * then must check where the data is smallest
- * and then align it to the block size
- */
- if (table_data_size > out_table_data_size)
- table_data_size = out_table_data_size;
-
- /*
- * Now calculate the table size so that
- * it will be module block size
- */
- table_data_size = (table_data_size / block_size) *
- block_size;
- }
-
- /* Construct input lli table */
- sep_build_lli_table(sep, &lli_in_array[current_in_entry],
- in_lli_table_ptr,
- ¤t_in_entry,
- &num_entries_in_table,
- table_data_size);
-
- /* Construct output lli table */
- sep_build_lli_table(sep, &lli_out_array[current_out_entry],
- out_lli_table_ptr,
- ¤t_out_entry,
- &num_entries_out_table,
- table_data_size);
-
- /* If info entry is null - this is the first table built */
- if (info_in_entry_ptr == NULL) {
- /* Set the output parameters to physical addresses */
- *lli_table_in_ptr =
- sep_shared_area_virt_to_bus(sep, in_lli_table_ptr);
-
- *in_num_entries_ptr = num_entries_in_table;
-
- *lli_table_out_ptr =
- sep_shared_area_virt_to_bus(sep,
- out_lli_table_ptr);
-
- *out_num_entries_ptr = num_entries_out_table;
- *table_data_size_ptr = table_data_size;
-
- dev_dbg(&sep->pdev->dev,
- "output lli_table_in_ptr is %08lx\n",
- (unsigned long)*lli_table_in_ptr);
- dev_dbg(&sep->pdev->dev,
- "output lli_table_out_ptr is %08lx\n",
- (unsigned long)*lli_table_out_ptr);
- } else {
- /* Update the info entry of the previous in table */
- info_in_entry_ptr->bus_address =
- sep_shared_area_virt_to_bus(sep,
- in_lli_table_ptr);
-
- info_in_entry_ptr->block_size =
- ((num_entries_in_table) << 24) |
- (table_data_size);
-
- /* Update the info entry of the previous in table */
- info_out_entry_ptr->bus_address =
- sep_shared_area_virt_to_bus(sep,
- out_lli_table_ptr);
-
- info_out_entry_ptr->block_size =
- ((num_entries_out_table) << 24) |
- (table_data_size);
-
- dev_dbg(&sep->pdev->dev,
- "output lli_table_in_ptr:%08lx %08x\n",
- (unsigned long)info_in_entry_ptr->bus_address,
- info_in_entry_ptr->block_size);
-
- dev_dbg(&sep->pdev->dev,
- "output lli_table_out_ptr:%08lx %08x\n",
- (unsigned long)info_out_entry_ptr->bus_address,
- info_out_entry_ptr->block_size);
- }
-
- /* Save the pointer to the info entry of the current tables */
- info_in_entry_ptr = in_lli_table_ptr +
- num_entries_in_table - 1;
- info_out_entry_ptr = out_lli_table_ptr +
- num_entries_out_table - 1;
-
- dev_dbg(&sep->pdev->dev,
- "output num_entries_out_table is %x\n",
- (u32)num_entries_out_table);
- dev_dbg(&sep->pdev->dev,
- "output info_in_entry_ptr is %lx\n",
- (unsigned long)info_in_entry_ptr);
- dev_dbg(&sep->pdev->dev,
- "output info_out_entry_ptr is %lx\n",
- (unsigned long)info_out_entry_ptr);
- }
-
- /* Print input tables */
- sep_debug_print_lli_tables(sep,
- (struct sep_lli_entry *)
- sep_shared_area_bus_to_virt(sep, *lli_table_in_ptr),
- *in_num_entries_ptr,
- *table_data_size_ptr);
-
- /* Print output tables */
- sep_debug_print_lli_tables(sep,
- (struct sep_lli_entry *)
- sep_shared_area_bus_to_virt(sep, *lli_table_out_ptr),
- *out_num_entries_ptr,
- *table_data_size_ptr);
-
- return 0;
-}
-
-/**
- * sep_prepare_input_output_dma_table - prepare DMA I/O table
- * @app_virt_in_addr:
- * @app_virt_out_addr:
- * @data_size:
- * @block_size:
- * @lli_table_in_ptr:
- * @lli_table_out_ptr:
- * @in_num_entries_ptr:
- * @out_num_entries_ptr:
- * @table_data_size_ptr:
- * @is_kva: set for kernel data; used only for kernel crypto module
- *
- * This function builds input and output DMA tables for synhronic
- * symmetric operations (AES, DES, HASH). It also checks that each table
- * is of the modular block size
- * Note that all bus addresses that are passed to the SEP
- * are in 32 bit format; the SEP is a 32 bit device
- */
-static int sep_prepare_input_output_dma_table(struct sep_device *sep,
- unsigned long app_virt_in_addr,
- unsigned long app_virt_out_addr,
- u32 data_size,
- u32 block_size,
- dma_addr_t *lli_table_in_ptr,
- dma_addr_t *lli_table_out_ptr,
- u32 *in_num_entries_ptr,
- u32 *out_num_entries_ptr,
- u32 *table_data_size_ptr,
- bool is_kva)
-
-{
- int error = 0;
- /* Array of pointers of page */
- struct sep_lli_entry *lli_in_array;
- /* Array of pointers of page */
- struct sep_lli_entry *lli_out_array;
-
- if (data_size == 0) {
- /* Prepare empty table for input and output */
- sep_prepare_empty_lli_table(sep, lli_table_in_ptr,
- in_num_entries_ptr, table_data_size_ptr);
-
- sep_prepare_empty_lli_table(sep, lli_table_out_ptr,
- out_num_entries_ptr, table_data_size_ptr);
-
- goto update_dcb_counter;
- }
-
- /* Initialize the pages pointers */
- sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = NULL;
- sep->dma_res_arr[sep->nr_dcb_creat].out_page_array = NULL;
-
- /* Lock the pages of the buffer and translate them to pages */
- if (is_kva == true) {
- error = sep_lock_kernel_pages(sep, app_virt_in_addr,
- data_size, &lli_in_array, SEP_DRIVER_IN_FLAG);
-
- if (error) {
- dev_warn(&sep->pdev->dev,
- "lock kernel for in failed\n");
- goto end_function;
- }
-
- error = sep_lock_kernel_pages(sep, app_virt_out_addr,
- data_size, &lli_out_array, SEP_DRIVER_OUT_FLAG);
-
- if (error) {
- dev_warn(&sep->pdev->dev,
- "lock kernel for out failed\n");
- goto end_function;
- }
- }
-
- else {
- error = sep_lock_user_pages(sep, app_virt_in_addr,
- data_size, &lli_in_array, SEP_DRIVER_IN_FLAG);
- if (error) {
- dev_warn(&sep->pdev->dev,
- "sep_lock_user_pages for input virtual buffer failed\n");
- goto end_function;
- }
-
- error = sep_lock_user_pages(sep, app_virt_out_addr,
- data_size, &lli_out_array, SEP_DRIVER_OUT_FLAG);
-
- if (error) {
- dev_warn(&sep->pdev->dev,
- "sep_lock_user_pages for output virtual buffer failed\n");
- goto end_function_free_lli_in;
- }
- }
-
- dev_dbg(&sep->pdev->dev, "prep input output dma table sep_in_num_pages is %x\n",
- sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages);
- dev_dbg(&sep->pdev->dev, "sep_out_num_pages is %x\n",
- sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages);
- dev_dbg(&sep->pdev->dev, "SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP is %x\n",
- SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP);
-
- /* Call the fucntion that creates table from the lli arrays */
- error = sep_construct_dma_tables_from_lli(sep, lli_in_array,
- sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages,
- lli_out_array,
- sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages,
- block_size, lli_table_in_ptr, lli_table_out_ptr,
- in_num_entries_ptr, out_num_entries_ptr, table_data_size_ptr);
-
- if (error) {
- dev_warn(&sep->pdev->dev,
- "sep_construct_dma_tables_from_lli failed\n");
- goto end_function_with_error;
- }
-
- kfree(lli_out_array);
- kfree(lli_in_array);
-
-update_dcb_counter:
- /* Update DCB counter */
- sep->nr_dcb_creat++;
-
- goto end_function;
-
-end_function_with_error:
- kfree(sep->dma_res_arr[sep->nr_dcb_creat].out_map_array);
- kfree(sep->dma_res_arr[sep->nr_dcb_creat].out_page_array);
- kfree(lli_out_array);
-
-
-end_function_free_lli_in:
- kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_map_array);
- kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_page_array);
- kfree(lli_in_array);
-
-end_function:
-
- return error;
-
-}
-
-/**
- * sep_prepare_input_output_dma_table_in_dcb - prepare control blocks
- * @app_in_address: unsigned long; for data buffer in (user space)
- * @app_out_address: unsigned long; for data buffer out (user space)
- * @data_in_size: u32; for size of data
- * @block_size: u32; for block size
- * @tail_block_size: u32; for size of tail block
- * @isapplet: bool; to indicate external app
- * @is_kva: bool; kernel buffer; only used for kernel crypto module
- *
- * This function prepares the linked DMA tables and puts the
- * address for the linked list of tables inta a DCB (data control
- * block) the address of which is known by the SEP hardware
- * Note that all bus addresses that are passed to the SEP
- * are in 32 bit format; the SEP is a 32 bit device
- */
-static int sep_prepare_input_output_dma_table_in_dcb(struct sep_device *sep,
- unsigned long app_in_address,
- unsigned long app_out_address,
- u32 data_in_size,
- u32 block_size,
- u32 tail_block_size,
- bool isapplet,
- bool is_kva)
-{
- int error = 0;
- /* Size of tail */
- u32 tail_size = 0;
- /* Address of the created DCB table */
- struct sep_dcblock *dcb_table_ptr = NULL;
- /* The physical address of the first input DMA table */
- dma_addr_t in_first_mlli_address = 0;
- /* Number of entries in the first input DMA table */
- u32 in_first_num_entries = 0;
- /* The physical address of the first output DMA table */
- dma_addr_t out_first_mlli_address = 0;
- /* Number of entries in the first output DMA table */
- u32 out_first_num_entries = 0;
- /* Data in the first input/output table */
- u32 first_data_size = 0;
-
- if (sep->nr_dcb_creat == SEP_MAX_NUM_SYNC_DMA_OPS) {
- /* No more DCBs to allocate */
- dev_warn(&sep->pdev->dev, "no more DCBs available\n");
- error = -ENOSPC;
- goto end_function;
- }
-
- /* Allocate new DCB */
- dcb_table_ptr = (struct sep_dcblock *)(sep->shared_addr +
- SEP_DRIVER_SYSTEM_DCB_MEMORY_OFFSET_IN_BYTES +
- (sep->nr_dcb_creat * sizeof(struct sep_dcblock)));
-
- /* Set the default values in the DCB */
- dcb_table_ptr->input_mlli_address = 0;
- dcb_table_ptr->input_mlli_num_entries = 0;
- dcb_table_ptr->input_mlli_data_size = 0;
- dcb_table_ptr->output_mlli_address = 0;
- dcb_table_ptr->output_mlli_num_entries = 0;
- dcb_table_ptr->output_mlli_data_size = 0;
- dcb_table_ptr->tail_data_size = 0;
- dcb_table_ptr->out_vr_tail_pt = 0;
-
- if (isapplet == true) {
-
- /* Check if there is enough data for DMA operation */
- if (data_in_size < SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE) {
- if (is_kva == true) {
- memcpy(dcb_table_ptr->tail_data,
- (void *)app_in_address, data_in_size);
- } else {
- if (copy_from_user(dcb_table_ptr->tail_data,
- (void __user *)app_in_address,
- data_in_size)) {
- error = -EFAULT;
- goto end_function;
- }
- }
-
- dcb_table_ptr->tail_data_size = data_in_size;
-
- /* Set the output user-space address for mem2mem op */
- if (app_out_address)
- dcb_table_ptr->out_vr_tail_pt =
- (aligned_u64)app_out_address;
-
- /*
- * Update both data length parameters in order to avoid
- * second data copy and allow building of empty mlli
- * tables
- */
- tail_size = 0x0;
- data_in_size = 0x0;
-
- } else {
- if (!app_out_address) {
- tail_size = data_in_size % block_size;
- if (!tail_size) {
- if (tail_block_size == block_size)
- tail_size = block_size;
- }
- } else {
- tail_size = 0;
- }
- }
- if (tail_size) {
- if (is_kva == true) {
- memcpy(dcb_table_ptr->tail_data,
- (void *)(app_in_address + data_in_size -
- tail_size), tail_size);
- } else {
- /* We have tail data - copy it to DCB */
- if (copy_from_user(dcb_table_ptr->tail_data,
- (void *)(app_in_address +
- data_in_size - tail_size), tail_size)) {
- error = -EFAULT;
- goto end_function;
- }
- }
- if (app_out_address)
- /*
- * Calculate the output address
- * according to tail data size
- */
- dcb_table_ptr->out_vr_tail_pt =
- (aligned_u64)app_out_address + data_in_size
- - tail_size;
-
- /* Save the real tail data size */
- dcb_table_ptr->tail_data_size = tail_size;
- /*
- * Update the data size without the tail
- * data size AKA data for the dma
- */
- data_in_size = (data_in_size - tail_size);
- }
- }
- /* Check if we need to build only input table or input/output */
- if (app_out_address) {
- /* Prepare input/output tables */
- error = sep_prepare_input_output_dma_table(sep,
- app_in_address,
- app_out_address,
- data_in_size,
- block_size,
- &in_first_mlli_address,
- &out_first_mlli_address,
- &in_first_num_entries,
- &out_first_num_entries,
- &first_data_size,
- is_kva);
- } else {
- /* Prepare input tables */
- error = sep_prepare_input_dma_table(sep,
- app_in_address,
- data_in_size,
- block_size,
- &in_first_mlli_address,
- &in_first_num_entries,
- &first_data_size,
- is_kva);
- }
-
- if (error) {
- dev_warn(&sep->pdev->dev, "prepare DMA table call failed from prepare DCB call\n");
- goto end_function;
- }
-
- /* Set the DCB values */
- dcb_table_ptr->input_mlli_address = in_first_mlli_address;
- dcb_table_ptr->input_mlli_num_entries = in_first_num_entries;
- dcb_table_ptr->input_mlli_data_size = first_data_size;
- dcb_table_ptr->output_mlli_address = out_first_mlli_address;
- dcb_table_ptr->output_mlli_num_entries = out_first_num_entries;
- dcb_table_ptr->output_mlli_data_size = first_data_size;
-
-end_function:
- return error;
-
-}
-
-
-/**
- * sep_create_sync_dma_tables_handler - create sync DMA tables
- * @sep: pointer to struct sep_device
- * @arg: pointer to struct bld_syn_tab_struct
- *
- * Handle the request for creation of the DMA tables for the synchronic
- * symmetric operations (AES,DES). Note that all bus addresses that are
- * passed to the SEP are in 32 bit format; the SEP is a 32 bit device
- */
-static int sep_create_sync_dma_tables_handler(struct sep_device *sep,
- unsigned long arg)
-{
- int error = 0;
-
- /* Command arguments */
- struct bld_syn_tab_struct command_args;
-
- if (copy_from_user(&command_args, (void __user *)arg,
- sizeof(struct bld_syn_tab_struct))) {
- error = -EFAULT;
- goto end_function;
- }
-
- dev_dbg(&sep->pdev->dev, "create dma table handler app_in_address is %08llx\n",
- command_args.app_in_address);
- dev_dbg(&sep->pdev->dev, "app_out_address is %08llx\n",
- command_args.app_out_address);
- dev_dbg(&sep->pdev->dev, "data_size is %u\n",
- command_args.data_in_size);
- dev_dbg(&sep->pdev->dev, "block_size is %u\n",
- command_args.block_size);
-
- /* Validate user parameters */
- if (!command_args.app_in_address) {
- error = -EINVAL;
- goto end_function;
- }
-
- error = sep_prepare_input_output_dma_table_in_dcb(sep,
- (unsigned long)command_args.app_in_address,
- (unsigned long)command_args.app_out_address,
- command_args.data_in_size,
- command_args.block_size,
- 0x0,
- false,
- false);
-
-end_function:
- return error;
-}
-
-/**
- * sep_free_dma_tables_and_dcb - free DMA tables and DCBs
- * @sep: pointer to struct sep_device
- * @isapplet: indicates external application (used for kernel access)
- * @is_kva: indicates kernel addresses (only used for kernel crypto)
- *
- * This function frees the DMA tables and DCB
- */
-static int sep_free_dma_tables_and_dcb(struct sep_device *sep, bool isapplet,
- bool is_kva)
-{
- int i = 0;
- int error = 0;
- int error_temp = 0;
- struct sep_dcblock *dcb_table_ptr;
- unsigned long pt_hold;
- void *tail_pt;
-
- if (isapplet == true) {
- /* Set pointer to first DCB table */
- dcb_table_ptr = (struct sep_dcblock *)
- (sep->shared_addr +
- SEP_DRIVER_SYSTEM_DCB_MEMORY_OFFSET_IN_BYTES);
-
- /* Go over each DCB and see if tail pointer must be updated */
- for (i = 0; i < sep->nr_dcb_creat; i++, dcb_table_ptr++) {
- if (dcb_table_ptr->out_vr_tail_pt) {
- pt_hold = (unsigned long)dcb_table_ptr->out_vr_tail_pt;
- tail_pt = (void *)pt_hold;
- if (is_kva == true) {
- memcpy(tail_pt,
- dcb_table_ptr->tail_data,
- dcb_table_ptr->tail_data_size);
- } else {
- error_temp = copy_to_user(
- tail_pt,
- dcb_table_ptr->tail_data,
- dcb_table_ptr->tail_data_size);
- }
- if (error_temp) {
- /* Release the DMA resource */
- error = -EFAULT;
- break;
- }
- }
- }
- }
- /* Free the output pages, if any */
- sep_free_dma_table_data_handler(sep);
-
- return error;
-}
-
-/**
- * sep_get_static_pool_addr_handler - get static pool address
- * @sep: pointer to struct sep_device
- *
- * This function sets the bus and virtual addresses of the static pool
- */
-static int sep_get_static_pool_addr_handler(struct sep_device *sep)
-{
- u32 *static_pool_addr = NULL;
-
- static_pool_addr = (u32 *)(sep->shared_addr +
- SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES);
-
- static_pool_addr[0] = SEP_STATIC_POOL_VAL_TOKEN;
- static_pool_addr[1] = (u32)sep->shared_bus +
- SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES;
-
- dev_dbg(&sep->pdev->dev, "static pool segment: physical %x\n",
- (u32)static_pool_addr[1]);
-
- return 0;
-}
-
-/**
- * sep_start_handler - start device
- * @sep: pointer to struct sep_device
- */
-static int sep_start_handler(struct sep_device *sep)
-{
- unsigned long reg_val;
- unsigned long error = 0;
-
- /* Wait in polling for message from SEP */
- do {
- reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
- } while (!reg_val);
-
- /* Check the value */
- if (reg_val == 0x1)
- /* Fatal error - read error status from GPRO */
- error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
- return error;
-}
-
-/**
- * ep_check_sum_calc - checksum messages
- * @data: buffer to checksum
- * @length: buffer size
- *
- * This function performs a checksum for messages that are sent
- * to the SEP.
- */
-static u32 sep_check_sum_calc(u8 *data, u32 length)
-{
- u32 sum = 0;
- u16 *Tdata = (u16 *)data;
-
- while (length > 1) {
- /* This is the inner loop */
- sum += *Tdata++;
- length -= 2;
- }
-
- /* Add left-over byte, if any */
- if (length > 0)
- sum += *(u8 *)Tdata;
-
- /* Fold 32-bit sum to 16 bits */
- while (sum>>16)
- sum = (sum & 0xffff) + (sum >> 16);
-
- return ~sum & 0xFFFF;
-}
-
-/**
- * sep_init_handler -
- * @sep: pointer to struct sep_device
- * @arg: parameters from user space application
- *
- * Handles the request for SEP initialization
- * Note that this will go away for Medfield once the SCU
- * SEP initialization is complete
- * Also note that the message to the SEP has components
- * from user space as well as components written by the driver
- * This is becuase the portions of the message that pertain to
- * physical addresses must be set by the driver after the message
- * leaves custody of the user space application for security
- * reasons.
- */
-static int sep_init_handler(struct sep_device *sep, unsigned long arg)
-{
- u32 message_buff[14];
- u32 counter;
- int error = 0;
- u32 reg_val;
- dma_addr_t new_base_addr;
- unsigned long addr_hold;
- struct init_struct command_args;
-
- /* Make sure that we have not initialized already */
- reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
-
- if (reg_val != 0x2) {
- error = SEP_ALREADY_INITIALIZED_ERR;
- dev_dbg(&sep->pdev->dev, "init; device already initialized\n");
- goto end_function;
- }
-
- /* Only root can initialize */
- if (!capable(CAP_SYS_ADMIN)) {
- error = -EACCES;
- goto end_function;
- }
-
- /* Copy in the parameters */
- error = copy_from_user(&command_args, (void __user *)arg,
- sizeof(struct init_struct));
-
- if (error) {
- error = -EFAULT;
- goto end_function;
- }
-
- /* Validate parameters */
- if (!command_args.message_addr || !command_args.sep_sram_addr ||
- command_args.message_size_in_words > 14) {
- error = -EINVAL;
- goto end_function;
- }
-
- /* Copy in the SEP init message */
- addr_hold = (unsigned long)command_args.message_addr;
- error = copy_from_user(message_buff,
- (void __user *)addr_hold,
- command_args.message_size_in_words*sizeof(u32));
-
- if (error) {
- error = -EFAULT;
- goto end_function;
- }
-
- /* Load resident, cache, and extapp firmware */
- error = sep_load_firmware(sep);
-
- if (error) {
- dev_warn(&sep->pdev->dev,
- "init; copy SEP init message failed %x\n", error);
- goto end_function;
- }
-
- /* Compute the base address */
- new_base_addr = sep->shared_bus;
-
- if (sep->resident_bus < new_base_addr)
- new_base_addr = sep->resident_bus;
-
- if (sep->cache_bus < new_base_addr)
- new_base_addr = sep->cache_bus;
-
- if (sep->dcache_bus < new_base_addr)
- new_base_addr = sep->dcache_bus;
-
- /* Put physical addresses in SEP message */
- message_buff[3] = (u32)new_base_addr;
- message_buff[4] = (u32)sep->shared_bus;
- message_buff[6] = (u32)sep->resident_bus;
- message_buff[7] = (u32)sep->cache_bus;
- message_buff[8] = (u32)sep->dcache_bus;
-
- message_buff[command_args.message_size_in_words - 1] = 0x0;
- message_buff[command_args.message_size_in_words - 1] =
- sep_check_sum_calc((u8 *)message_buff,
- command_args.message_size_in_words*sizeof(u32));
-
- /* Debug print of message */
- for (counter = 0; counter < command_args.message_size_in_words;
- counter++)
- dev_dbg(&sep->pdev->dev, "init; SEP message word %d is %x\n",
- counter, message_buff[counter]);
-
- /* Tell the SEP the sram address */
- sep_write_reg(sep, HW_SRAM_ADDR_REG_ADDR, command_args.sep_sram_addr);
-
- /* Push the message to the SEP */
- for (counter = 0; counter < command_args.message_size_in_words;
- counter++) {
- sep_write_reg(sep, HW_SRAM_DATA_REG_ADDR,
- message_buff[counter]);
- sep_wait_sram_write(sep);
- }
-
- /* Signal SEP that message is ready and to init */
- sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x1);
-
- /* Wait for acknowledge */
-
- do {
- reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
- } while (!(reg_val & 0xFFFFFFFD));
-
- if (reg_val == 0x1) {
- dev_warn(&sep->pdev->dev, "init; device int failed\n");
- error = sep_read_reg(sep, 0x8060);
- dev_warn(&sep->pdev->dev, "init; sw monitor is %x\n", error);
- error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
- dev_warn(&sep->pdev->dev, "init; error is %x\n", error);
- goto end_function;
- }
- /* Signal SEP to zero the GPR3 */
- sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x10);
-
- /* Wait for response */
-
- do {
- reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
- } while (reg_val != 0);
-
-end_function:
- return error;
-}
-
-/**
- * sep_end_transaction_handler - end transaction
- * @sep: pointer to struct sep_device
- *
- * This API handles the end transaction request
- */
-static int sep_end_transaction_handler(struct sep_device *sep)
-{
- /* Clear the data pool pointers Token */
- memset((void *)(sep->shared_addr +
- SEP_DRIVER_DATA_POOL_ALLOCATION_OFFSET_IN_BYTES),
- 0, sep->num_of_data_allocations*2*sizeof(u32));
-
- /* Check that all the DMA resources were freed */
- sep_free_dma_table_data_handler(sep);
-
- clear_bit(SEP_MMAP_LOCK_BIT, &sep->in_use_flags);
-
- /*
- * We are now through with the transaction. Let's
- * allow other processes who have the device open
- * to perform transactions
- */
- mutex_lock(&sep->sep_mutex);
- sep->pid_doing_transaction = 0;
- mutex_unlock(&sep->sep_mutex);
- /* Raise event for stuck contextes */
- wake_up(&sep->event);
-
- return 0;
-}
-
-/**
- * sep_prepare_dcb_handler - prepare a control block
- * @sep: pointer to struct sep_device
- * @arg: pointer to user parameters
- *
- * This function will retrieve the RAR buffer physical addresses, type
- * & size corresponding to the RAR handles provided in the buffers vector.
- */
-static int sep_prepare_dcb_handler(struct sep_device *sep, unsigned long arg)
-{
- int error;
- /* Command arguments */
- struct build_dcb_struct command_args;
-
- /* Get the command arguments */
- if (copy_from_user(&command_args, (void __user *)arg,
- sizeof(struct build_dcb_struct))) {
- error = -EFAULT;
- goto end_function;
- }
-
- dev_dbg(&sep->pdev->dev, "prep dcb handler app_in_address is %08llx\n",
- command_args.app_in_address);
- dev_dbg(&sep->pdev->dev, "app_out_address is %08llx\n",
- command_args.app_out_address);
- dev_dbg(&sep->pdev->dev, "data_size is %x\n",
- command_args.data_in_size);
- dev_dbg(&sep->pdev->dev, "block_size is %x\n",
- command_args.block_size);
- dev_dbg(&sep->pdev->dev, "tail block_size is %x\n",
- command_args.tail_block_size);
-
- error = sep_prepare_input_output_dma_table_in_dcb(sep,
- (unsigned long)command_args.app_in_address,
- (unsigned long)command_args.app_out_address,
- command_args.data_in_size, command_args.block_size,
- command_args.tail_block_size, true, false);
-
-end_function:
- return error;
-
-}
-
-/**
- * sep_free_dcb_handler - free control block resources
- * @sep: pointer to struct sep_device
- *
- * This function frees the DCB resources and updates the needed
- * user-space buffers.
- */
-static int sep_free_dcb_handler(struct sep_device *sep)
-{
- return sep_free_dma_tables_and_dcb(sep, false, false);
-}
-
-/**
- * sep_rar_prepare_output_msg_handler - prepare an output message
- * @sep: pointer to struct sep_device
- * @arg: pointer to user parameters
- *
- * This function will retrieve the RAR buffer physical addresses, type
- * & size corresponding to the RAR handles provided in the buffers vector.
- */
-static int sep_rar_prepare_output_msg_handler(struct sep_device *sep,
- unsigned long arg)
-{
- int error = 0;
- /* Command args */
- struct rar_hndl_to_bus_struct command_args;
- struct RAR_buffer rar_buf;
- /* Bus address */
- dma_addr_t rar_bus = 0;
- /* Holds the RAR address in the system memory offset */
- u32 *rar_addr;
-
- /* Copy the data */
- if (copy_from_user(&command_args, (void __user *)arg,
- sizeof(command_args))) {
- error = -EFAULT;
- goto end_function;
- }
-
- /* Call to translation function only if user handle is not NULL */
- if (command_args.rar_handle) {
- memset(&rar_buf, 0, sizeof(rar_buf));
- rar_buf.info.handle = (u32)command_args.rar_handle;
-
- if (rar_handle_to_bus(&rar_buf, 1) != 1) {
- error = -EFAULT;
- goto end_function;
- }
- rar_bus = rar_buf.bus_address;
- }
- dev_dbg(&sep->pdev->dev, "rar msg; rar_addr_bus = %x\n", (u32)rar_bus);
-
- /* Set value in the SYSTEM MEMORY offset */
- rar_addr = (u32 *)(sep->shared_addr +
- SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES);
-
- /* Copy the physical address to the System Area for the SEP */
- rar_addr[0] = SEP_RAR_VAL_TOKEN;
- rar_addr[1] = rar_bus;
-
-end_function:
- return error;
-}
-
-/**
- * sep_realloc_ext_cache_handler - report location of extcache
- * @sep: pointer to struct sep_device
- * @arg: pointer to user parameters
- *
- * This function tells the SEP where the extapp is located
- */
-static int sep_realloc_ext_cache_handler(struct sep_device *sep,
- unsigned long arg)
-{
- /* Holds the new ext cache address in the system memory offset */
- u32 *system_addr;
-
- /* Set value in the SYSTEM MEMORY offset */
- system_addr = (u32 *)(sep->shared_addr +
- SEP_DRIVER_SYSTEM_EXT_CACHE_ADDR_OFFSET_IN_BYTES);
-
- /* Copy the physical address to the System Area for the SEP */
- system_addr[0] = SEP_EXT_CACHE_ADDR_VAL_TOKEN;
- system_addr[1] = sep->extapp_bus;
-
- return 0;
-}
-
-/**
- * sep_ioctl - ioctl api
- * @filp: pointer to struct file
- * @cmd: command
- * @arg: pointer to argument structure
- *
- * Implement the ioctl methods availble on the SEP device.
- */
-static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
- int error = 0;
- struct sep_device *sep = filp->private_data;
-
- /* Make sure we own this device */
- mutex_lock(&sep->sep_mutex);
- if ((current->pid != sep->pid_doing_transaction) &&
- (sep->pid_doing_transaction != 0)) {
- dev_dbg(&sep->pdev->dev, "ioctl pid is not owner\n");
- error = -EACCES;
- goto end_function;
- }
-
- mutex_unlock(&sep->sep_mutex);
-
- if (_IOC_TYPE(cmd) != SEP_IOC_MAGIC_NUMBER)
- return -ENOTTY;
-
- /* Lock to prevent the daemon to interfere with operation */
- mutex_lock(&sep->ioctl_mutex);
-
- switch (cmd) {
- case SEP_IOCSENDSEPCOMMAND:
- /* Send command to SEP */
- error = sep_send_command_handler(sep);
- break;
- case SEP_IOCALLOCDATAPOLL:
- /* Allocate data pool */
- error = sep_allocate_data_pool_memory_handler(sep, arg);
- break;
- case SEP_IOCCREATESYMDMATABLE:
- /* Create DMA table for synhronic operation */
- error = sep_create_sync_dma_tables_handler(sep, arg);
- break;
- case SEP_IOCFREEDMATABLEDATA:
- /* Free the pages */
- error = sep_free_dma_table_data_handler(sep);
- break;
- case SEP_IOCSEPSTART:
- /* Start command to SEP */
- if (sep->pdev->revision == 0) /* Only for old chip */
- error = sep_start_handler(sep);
- else
- error = -EPERM; /* Not permitted on new chip */
- break;
- case SEP_IOCSEPINIT:
- /* Init command to SEP */
- if (sep->pdev->revision == 0) /* Only for old chip */
- error = sep_init_handler(sep, arg);
- else
- error = -EPERM; /* Not permitted on new chip */
- break;
- case SEP_IOCGETSTATICPOOLADDR:
- /* Inform the SEP the bus address of the static pool */
- error = sep_get_static_pool_addr_handler(sep);
- break;
- case SEP_IOCENDTRANSACTION:
- error = sep_end_transaction_handler(sep);
- break;
- case SEP_IOCREALLOCEXTCACHE:
- if (sep->pdev->revision == 0) /* Only for old chip */
- error = sep_realloc_ext_cache_handler(sep, arg);
- else
- error = -EPERM; /* Not permitted on new chip */
- break;
- case SEP_IOCRARPREPAREMESSAGE:
- error = sep_rar_prepare_output_msg_handler(sep, arg);
- break;
- case SEP_IOCPREPAREDCB:
- error = sep_prepare_dcb_handler(sep, arg);
- break;
- case SEP_IOCFREEDCB:
- error = sep_free_dcb_handler(sep);
- break;
- default:
- error = -ENOTTY;
- break;
- }
-
-end_function:
- mutex_unlock(&sep->ioctl_mutex);
- return error;
-}
-
-/**
- * sep_singleton_ioctl - ioctl api for singleton interface
- * @filp: pointer to struct file
- * @cmd: command
- * @arg: pointer to argument structure
- *
- * Implement the additional ioctls for the singleton device
- */
-static long sep_singleton_ioctl(struct file *filp, u32 cmd, unsigned long arg)
-{
- long error = 0;
- struct sep_device *sep = filp->private_data;
-
- /* Check that the command is for the SEP device */
- if (_IOC_TYPE(cmd) != SEP_IOC_MAGIC_NUMBER)
- return -ENOTTY;
-
- /* Make sure we own this device */
- mutex_lock(&sep->sep_mutex);
- if ((current->pid != sep->pid_doing_transaction) &&
- (sep->pid_doing_transaction != 0)) {
- dev_dbg(&sep->pdev->dev, "singleton ioctl pid is not owner\n");
- mutex_unlock(&sep->sep_mutex);
- return -EACCES;
- }
-
- mutex_unlock(&sep->sep_mutex);
-
- switch (cmd) {
- case SEP_IOCTLSETCALLERID:
- mutex_lock(&sep->ioctl_mutex);
- error = sep_set_caller_id_handler(sep, arg);
- mutex_unlock(&sep->ioctl_mutex);
- break;
- default:
- error = sep_ioctl(filp, cmd, arg);
- break;
- }
- return error;
-}
-
-/**
- * sep_request_daemon_ioctl - ioctl for daemon
- * @filp: pointer to struct file
- * @cmd: command
- * @arg: pointer to argument structure
- *
- * Called by the request daemon to perform ioctls on the daemon device
- */
-static long sep_request_daemon_ioctl(struct file *filp, u32 cmd,
- unsigned long arg)
-{
-
- long error;
- struct sep_device *sep = filp->private_data;
-
- /* Check that the command is for SEP device */
- if (_IOC_TYPE(cmd) != SEP_IOC_MAGIC_NUMBER)
- return -ENOTTY;
-
- /* Only one process can access ioctl at any given time */
- mutex_lock(&sep->ioctl_mutex);
-
- switch (cmd) {
- case SEP_IOCSENDSEPRPLYCOMMAND:
- /* Send reply command to SEP */
- error = sep_req_daemon_send_reply_command_handler(sep);
- break;
- case SEP_IOCENDTRANSACTION:
- /*
- * End req daemon transaction, do nothing
- * will be removed upon update in middleware
- * API library
- */
- error = 0;
- break;
- default:
- error = -ENOTTY;
- }
- mutex_unlock(&sep->ioctl_mutex);
- return error;
-}
-
-/**
- * sep_inthandler - interrupt handler
- * @irq: interrupt
- * @dev_id: device id
- */
-static irqreturn_t sep_inthandler(int irq, void *dev_id)
-{
- irqreturn_t int_error = IRQ_HANDLED;
- unsigned long lck_flags;
- u32 reg_val, reg_val2 = 0;
- struct sep_device *sep = dev_id;
-
- /* Read the IRR register to check if this is SEP interrupt */
- reg_val = sep_read_reg(sep, HW_HOST_IRR_REG_ADDR);
-
- if (reg_val & (0x1 << 13)) {
- /* Lock and update the counter of reply messages */
- spin_lock_irqsave(&sep->snd_rply_lck, lck_flags);
- sep->reply_ct++;
- spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
-
- dev_dbg(&sep->pdev->dev, "sep int: send_ct %lx reply_ct %lx\n",
- sep->send_ct, sep->reply_ct);
-
- /* Is this printf or daemon request? */
- reg_val2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
- dev_dbg(&sep->pdev->dev,
- "SEP Interrupt - reg2 is %08x\n", reg_val2);
-
- if ((reg_val2 >> 30) & 0x1) {
- dev_dbg(&sep->pdev->dev, "int: printf request\n");
- wake_up(&sep->event_request_daemon);
- } else if (reg_val2 >> 31) {
- dev_dbg(&sep->pdev->dev, "int: daemon request\n");
- wake_up(&sep->event_request_daemon);
- } else {
- dev_dbg(&sep->pdev->dev, "int: SEP reply\n");
- wake_up(&sep->event);
- }
- } else {
- dev_dbg(&sep->pdev->dev, "int: not SEP interrupt\n");
- int_error = IRQ_NONE;
- }
- if (int_error == IRQ_HANDLED)
- sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, reg_val);
-
- return int_error;
-}
-
-/**
- * sep_reconfig_shared_area - reconfigure shared area
- * @sep: pointer to struct sep_device
- *
- * Reconfig the shared area between HOST and SEP - needed in case
- * the DX_CC_Init function was called before OS loading.
- */
-static int sep_reconfig_shared_area(struct sep_device *sep)
-{
- int ret_val;
-
- /* use to limit waiting for SEP */
- unsigned long end_time;
-
- /* Send the new SHARED MESSAGE AREA to the SEP */
- dev_dbg(&sep->pdev->dev, "reconfig shared; sending %08llx to sep\n",
- (unsigned long long)sep->shared_bus);
-
- sep_write_reg(sep, HW_HOST_HOST_SEP_GPR1_REG_ADDR, sep->shared_bus);
-
- /* Poll for SEP response */
- ret_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR);
-
- end_time = jiffies + (WAIT_TIME * HZ);
-
- while ((time_before(jiffies, end_time)) && (ret_val != 0xffffffff) &&
- (ret_val != sep->shared_bus))
- ret_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR);
-
- /* Check the return value (register) */
- if (ret_val != sep->shared_bus) {
- dev_warn(&sep->pdev->dev, "could not reconfig shared area\n");
- dev_warn(&sep->pdev->dev, "result was %x\n", ret_val);
- ret_val = -ENOMEM;
- } else
- ret_val = 0;
-
- dev_dbg(&sep->pdev->dev, "reconfig shared area end\n");
- return ret_val;
-}
-
-/* File operation for singleton SEP operations */
-static const struct file_operations singleton_file_operations = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = sep_singleton_ioctl,
- .poll = sep_poll,
- .open = sep_singleton_open,
- .release = sep_singleton_release,
- .mmap = sep_mmap,
-};
-
-/* File operation for daemon operations */
-static const struct file_operations daemon_file_operations = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = sep_request_daemon_ioctl,
- .poll = sep_request_daemon_poll,
- .open = sep_request_daemon_open,
- .release = sep_request_daemon_release,
- .mmap = sep_request_daemon_mmap,
-};
-
-/* The files operations structure of the driver */
-static const struct file_operations sep_file_operations = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = sep_ioctl,
- .poll = sep_poll,
- .open = sep_open,
- .release = sep_release,
- .mmap = sep_mmap,
-};
-
-/**
- * sep_register_driver_with_fs - register misc devices
- * @sep: pointer to struct sep_device
- *
- * This function registers the driver with the file system
- */
-static int sep_register_driver_with_fs(struct sep_device *sep)
-{
- int ret_val;
-
- sep->miscdev_sep.minor = MISC_DYNAMIC_MINOR;
- sep->miscdev_sep.name = SEP_DEV_NAME;
- sep->miscdev_sep.fops = &sep_file_operations;
-
- sep->miscdev_singleton.minor = MISC_DYNAMIC_MINOR;
- sep->miscdev_singleton.name = SEP_DEV_SINGLETON;
- sep->miscdev_singleton.fops = &singleton_file_operations;
-
- sep->miscdev_daemon.minor = MISC_DYNAMIC_MINOR;
- sep->miscdev_daemon.name = SEP_DEV_DAEMON;
- sep->miscdev_daemon.fops = &daemon_file_operations;
-
- ret_val = misc_register(&sep->miscdev_sep);
- if (ret_val) {
- dev_warn(&sep->pdev->dev, "misc reg fails for SEP %x\n",
- ret_val);
- return ret_val;
- }
-
- ret_val = misc_register(&sep->miscdev_singleton);
- if (ret_val) {
- dev_warn(&sep->pdev->dev, "misc reg fails for sing %x\n",
- ret_val);
- misc_deregister(&sep->miscdev_sep);
- return ret_val;
- }
-
- ret_val = misc_register(&sep->miscdev_daemon);
- if (ret_val) {
- dev_warn(&sep->pdev->dev, "misc reg fails for dmn %x\n",
- ret_val);
- misc_deregister(&sep->miscdev_sep);
- misc_deregister(&sep->miscdev_singleton);
-
- return ret_val;
- }
- return ret_val;
-}
-
-
-/**
- * sep_probe - probe a matching PCI device
- * @pdev: pci_device
- * @end: pci_device_id
- *
- * Attempt to set up and configure a SEP device that has been
- * discovered by the PCI layer.
- */
-static int __devinit sep_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- int error = 0;
- struct sep_device *sep;
-
- if (sep_dev != NULL) {
- dev_warn(&pdev->dev, "only one SEP supported.\n");
- return -EBUSY;
- }
-
- /* Enable the device */
- error = pci_enable_device(pdev);
- if (error) {
- dev_warn(&pdev->dev, "error enabling pci device\n");
- goto end_function;
- }
-
- /* Allocate the sep_device structure for this device */
- sep_dev = kzalloc(sizeof(struct sep_device), GFP_ATOMIC);
- if (sep_dev == NULL) {
- dev_warn(&pdev->dev,
- "can't kmalloc the sep_device structure\n");
- error = -ENOMEM;
- goto end_function_disable_device;
- }
-
- /*
- * We're going to use another variable for actually
- * working with the device; this way, if we have
- * multiple devices in the future, it would be easier
- * to make appropriate changes
- */
- sep = sep_dev;
-
- sep->pdev = pci_dev_get(pdev);
-
- init_waitqueue_head(&sep->event);
- init_waitqueue_head(&sep->event_request_daemon);
- spin_lock_init(&sep->snd_rply_lck);
- mutex_init(&sep->sep_mutex);
- mutex_init(&sep->ioctl_mutex);
-
- dev_dbg(&sep->pdev->dev, "sep probe: PCI obtained, device being prepared\n");
- dev_dbg(&sep->pdev->dev, "revision is %d\n", sep->pdev->revision);
-
- /* Set up our register area */
- sep->reg_physical_addr = pci_resource_start(sep->pdev, 0);
- if (!sep->reg_physical_addr) {
- dev_warn(&sep->pdev->dev, "Error getting register start\n");
- error = -ENODEV;
- goto end_function_free_sep_dev;
- }
-
- sep->reg_physical_end = pci_resource_end(sep->pdev, 0);
- if (!sep->reg_physical_end) {
- dev_warn(&sep->pdev->dev, "Error getting register end\n");
- error = -ENODEV;
- goto end_function_free_sep_dev;
- }
-
- sep->reg_addr = ioremap_nocache(sep->reg_physical_addr,
- (size_t)(sep->reg_physical_end - sep->reg_physical_addr + 1));
- if (!sep->reg_addr) {
- dev_warn(&sep->pdev->dev, "Error getting register virtual\n");
- error = -ENODEV;
- goto end_function_free_sep_dev;
- }
-
- dev_dbg(&sep->pdev->dev,
- "Register area start %llx end %llx virtual %p\n",
- (unsigned long long)sep->reg_physical_addr,
- (unsigned long long)sep->reg_physical_end,
- sep->reg_addr);
-
- /* Allocate the shared area */
- sep->shared_size = SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES +
- SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES +
- SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES +
- SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES +
- SEP_DRIVER_SYSTEM_DATA_MEMORY_SIZE_IN_BYTES;
-
- if (sep_map_and_alloc_shared_area(sep)) {
- error = -ENOMEM;
- /* Allocation failed */
- goto end_function_error;
- }
-
- sep->rar_size = FAKE_RAR_SIZE;
- sep->rar_addr = dma_alloc_coherent(&sep->pdev->dev,
- sep->rar_size, &sep->rar_bus, GFP_KERNEL);
- if (sep->rar_addr == NULL) {
- dev_warn(&sep->pdev->dev, "can't allocate mfld rar\n");
- error = -ENOMEM;
- goto end_function_deallocate_sep_shared_area;
- }
-
- dev_dbg(&sep->pdev->dev, "rar start is %p, phy is %llx,"
- " size is %zx\n", sep->rar_addr,
- (unsigned long long)sep->rar_bus,
- sep->rar_size);
-
- /* Clear ICR register */
- sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, 0xFFFFFFFF);
-
- /* Set the IMR register - open only GPR 2 */
- sep_write_reg(sep, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13)));
-
- /* Read send/receive counters from SEP */
- sep->reply_ct = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
- sep->reply_ct &= 0x3FFFFFFF;
- sep->send_ct = sep->reply_ct;
-
- /* Get the interrupt line */
- error = request_irq(pdev->irq, sep_inthandler, IRQF_SHARED,
- "sep_driver", sep);
-
- if (error)
- goto end_function_dealloc_rar;
-
- /* The new chip requires a shared area reconfigure */
- if (sep->pdev->revision == 4) { /* Only for new chip */
- error = sep_reconfig_shared_area(sep);
- if (error)
- goto end_function_free_irq;
- }
- /* Finally magic up the device nodes */
- /* Register driver with the fs */
- error = sep_register_driver_with_fs(sep);
- if (error == 0)
- /* Success */
- return 0;
-
-end_function_free_irq:
- free_irq(pdev->irq, sep);
-
-end_function_dealloc_rar:
- if (sep->rar_addr)
- dma_free_coherent(&sep->pdev->dev, sep->rar_size,
- sep->rar_addr, sep->rar_bus);
- goto end_function;
-
-end_function_deallocate_sep_shared_area:
- /* De-allocate shared area */
- sep_unmap_and_free_shared_area(sep);
-
-end_function_error:
- iounmap(sep->reg_addr);
-
-end_function_free_sep_dev:
- pci_dev_put(sep_dev->pdev);
- kfree(sep_dev);
- sep_dev = NULL;
-
-end_function_disable_device:
- pci_disable_device(pdev);
-
-end_function:
- return error;
-}
-
-static void sep_remove(struct pci_dev *pdev)
-{
- struct sep_device *sep = sep_dev;
-
- /* Unregister from fs */
- misc_deregister(&sep->miscdev_sep);
- misc_deregister(&sep->miscdev_singleton);
- misc_deregister(&sep->miscdev_daemon);
-
- /* Free the irq */
- free_irq(sep->pdev->irq, sep);
-
- /* Free the shared area */
- sep_unmap_and_free_shared_area(sep_dev);
- iounmap((void *) sep_dev->reg_addr);
-}
-
-static DEFINE_PCI_DEVICE_TABLE(sep_pci_id_tbl) = {
- {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MFLD_PCI_DEVICE_ID)},
- {0}
-};
-
-MODULE_DEVICE_TABLE(pci, sep_pci_id_tbl);
-
-/* Field for registering driver to PCI device */
-static struct pci_driver sep_pci_driver = {
- .name = "sep_sec_driver",
- .id_table = sep_pci_id_tbl,
- .probe = sep_probe,
- .remove = sep_remove
-};
-
-
-/**
- * sep_init - init function
- *
- * Module load time. Register the PCI device driver.
- */
-static int __init sep_init(void)
-{
- return pci_register_driver(&sep_pci_driver);
-}
-
-
-/**
- * sep_exit - called to unload driver
- *
- * Drop the misc devices then remove and unmap the various resources
- * that are not released by the driver remove method.
- */
-static void __exit sep_exit(void)
-{
- pci_unregister_driver(&sep_pci_driver);
-}
-
-
-module_init(sep_init);
-module_exit(sep_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/sep/sep_main.c b/drivers/staging/sep/sep_main.c
new file mode 100644
index 0000000..d841289
--- /dev/null
+++ b/drivers/staging/sep/sep_main.c
@@ -0,0 +1,3348 @@
+/*
+ *
+ * sep_driver.c - Security Processor Driver main group of functions
+ *
+ * Copyright(c) 2009,2010 Intel Corporation. All rights reserved.
+ * Contributions(c) 2009,2010 Discretix. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * CONTACTS:
+ *
+ * Mark Allyn mark.a.allyn@...el.com
+ * Jayant Mangalampalli jayant.mangalampalli@...el.com
+ *
+ * CHANGES:
+ *
+ * 2009.06.26 Initial publish
+ * 2010.09.14 Upgrade to Medfield
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/kdev_t.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/poll.h>
+#include <linux/wait.h>
+#include <linux/pci.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/ioctl.h>
+#include <asm/current.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/pagemap.h>
+#include <asm/cacheflush.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/rar_register.h>
+
+#include "../memrar/memrar.h"
+
+#include "sep_driver_hw_defs.h"
+#include "sep_driver_config.h"
+#include "sep_driver_api.h"
+#include "sep_dev.h"
+
+/*----------------------------------------
+ DEFINES
+-----------------------------------------*/
+
+#define SEP_RAR_IO_MEM_REGION_SIZE 0x40000
+
+/*--------------------------------------------
+ GLOBAL variables
+--------------------------------------------*/
+
+/* Keep this a single static object for now to keep the conversion easy */
+
+static struct sep_device *sep_dev;
+
+/**
+ * sep_load_firmware - copy firmware cache/resident
+ * @sep: pointer to struct sep_device we are loading
+ *
+ * This functions copies the cache and resident from their source
+ * location into destination shared memory.
+ */
+static int sep_load_firmware(struct sep_device *sep)
+{
+ const struct firmware *fw;
+ char *cache_name = "cache.image.bin";
+ char *res_name = "resident.image.bin";
+ char *extapp_name = "extapp.image.bin";
+ int error ;
+ unsigned long work1, work2, work3;
+
+ /* Set addresses and load resident */
+ sep->resident_bus = sep->rar_bus;
+ sep->resident_addr = sep->rar_addr;
+
+ error = request_firmware(&fw, res_name, &sep->pdev->dev);
+ if (error) {
+ dev_warn(&sep->pdev->dev, "can't request resident fw\n");
+ return error;
+ }
+
+ memcpy(sep->resident_addr, (void *)fw->data, fw->size);
+ sep->resident_size = fw->size;
+ release_firmware(fw);
+
+ dev_dbg(&sep->pdev->dev, "resident bus is %lx\n",
+ (unsigned long)sep->resident_bus);
+
+ /* Set addresses for dcache (no loading needed) */
+ work1 = (unsigned long)sep->resident_bus;
+ work2 = (unsigned long)sep->resident_size;
+ work3 = (work1 + work2 + (1024 * 4)) & 0xfffff000;
+ sep->dcache_bus = (dma_addr_t)work3;
+
+ work1 = (unsigned long)sep->resident_addr;
+ work2 = (unsigned long)sep->resident_size;
+ work3 = (work1 + work2 + (1024 * 4)) & 0xfffff000;
+ sep->dcache_addr = (void *)work3;
+
+ sep->dcache_size = 1024 * 128;
+
+ /* Set addresses and load cache */
+ sep->cache_bus = sep->dcache_bus + sep->dcache_size;
+ sep->cache_addr = sep->dcache_addr + sep->dcache_size;
+
+ error = request_firmware(&fw, cache_name, &sep->pdev->dev);
+ if (error) {
+ dev_warn(&sep->pdev->dev, "Unable to request cache firmware\n");
+ return error;
+ }
+
+ memcpy(sep->cache_addr, (void *)fw->data, fw->size);
+ sep->cache_size = fw->size;
+ release_firmware(fw);
+
+ dev_dbg(&sep->pdev->dev, "cache bus is %08lx\n",
+ (unsigned long)sep->cache_bus);
+
+ /* Set addresses and load extapp */
+ sep->extapp_bus = sep->cache_bus + (1024 * 370);
+ sep->extapp_addr = sep->cache_addr + (1024 * 370);
+
+ error = request_firmware(&fw, extapp_name, &sep->pdev->dev);
+ if (error) {
+ dev_warn(&sep->pdev->dev, "Unable to request extapp firmware\n");
+ return error;
+ }
+
+ memcpy(sep->extapp_addr, (void *)fw->data, fw->size);
+ sep->extapp_size = fw->size;
+ release_firmware(fw);
+
+ dev_dbg(&sep->pdev->dev, "extapp bus is %08llx\n",
+ (unsigned long long)sep->extapp_bus);
+
+ return error;
+}
+
+MODULE_FIRMWARE("sep/cache.image.bin");
+MODULE_FIRMWARE("sep/resident.image.bin");
+MODULE_FIRMWARE("sep/extapp.image.bin");
+
+/**
+ * sep_dump_message - dump the message that is pending
+ * @sep: SEP device
+ */
+static void sep_dump_message(struct sep_device *sep)
+{
+ int count;
+ u32 *p = sep->shared_addr;
+ for (count = 0; count < 12 * 4; count += 4)
+ dev_dbg(&sep->pdev->dev, "Word %d of the message is %x\n",
+ count, *p++);
+}
+
+/**
+ * sep_map_and_alloc_shared_area - allocate shared block
+ * @sep: security processor
+ * @size: size of shared area
+ */
+static int sep_map_and_alloc_shared_area(struct sep_device *sep)
+{
+ sep->shared_addr = dma_alloc_coherent(&sep->pdev->dev,
+ sep->shared_size,
+ &sep->shared_bus, GFP_KERNEL);
+
+ if (!sep->shared_addr) {
+ dev_warn(&sep->pdev->dev,
+ "shared memory dma_alloc_coherent failed\n");
+ return -ENOMEM;
+ }
+ dev_dbg(&sep->pdev->dev,
+ "shared_addr %zx bytes @%p (bus %llx)\n",
+ sep->shared_size, sep->shared_addr,
+ (unsigned long long)sep->shared_bus);
+ return 0;
+}
+
+/**
+ * sep_unmap_and_free_shared_area - free shared block
+ * @sep: security processor
+ */
+static void sep_unmap_and_free_shared_area(struct sep_device *sep)
+{
+ dma_free_coherent(&sep->pdev->dev, sep->shared_size,
+ sep->shared_addr, sep->shared_bus);
+}
+
+/**
+ * sep_shared_bus_to_virt - convert bus/virt addresses
+ * @sep: pointer to struct sep_device
+ * @bus_address: address to convert
+ *
+ * Returns virtual address inside the shared area according
+ * to the bus address.
+ */
+static void *sep_shared_bus_to_virt(struct sep_device *sep,
+ dma_addr_t bus_address)
+{
+ return sep->shared_addr + (bus_address - sep->shared_bus);
+}
+
+/**
+ * open function for the singleton driver
+ * @inode_ptr struct inode *
+ * @file_ptr struct file *
+ *
+ * Called when the user opens the singleton device interface
+ */
+static int sep_singleton_open(struct inode *inode_ptr, struct file *file_ptr)
+{
+ struct sep_device *sep;
+
+ /*
+ * Get the SEP device structure and use it for the
+ * private_data field in filp for other methods
+ */
+ sep = sep_dev;
+
+ file_ptr->private_data = sep;
+
+ if (test_and_set_bit(0, &sep->singleton_access_flag))
+ return -EBUSY;
+ return 0;
+}
+
+/**
+ * sep_open - device open method
+ * @inode: inode of SEP device
+ * @filp: file handle to SEP device
+ *
+ * Open method for the SEP device. Called when userspace opens
+ * the SEP device node.
+ *
+ * Returns zero on success otherwise an error code.
+ */
+static int sep_open(struct inode *inode, struct file *filp)
+{
+ struct sep_device *sep;
+
+ /*
+ * Get the SEP device structure and use it for the
+ * private_data field in filp for other methods
+ */
+ sep = sep_dev;
+ filp->private_data = sep;
+
+ /* Anyone can open; locking takes place at transaction level */
+ return 0;
+}
+
+/**
+ * sep_singleton_release - close a SEP singleton device
+ * @inode: inode of SEP device
+ * @filp: file handle being closed
+ *
+ * Called on the final close of a SEP device. As the open protects against
+ * multiple simultaenous opens that means this method is called when the
+ * final reference to the open handle is dropped.
+ */
+static int sep_singleton_release(struct inode *inode, struct file *filp)
+{
+ struct sep_device *sep = filp->private_data;
+
+ clear_bit(0, &sep->singleton_access_flag);
+ return 0;
+}
+
+/**
+ * sep_request_daemonopen - request daemon open method
+ * @inode: inode of SEP device
+ * @filp: file handle to SEP device
+ *
+ * Open method for the SEP request daemon. Called when
+ * request daemon in userspace opens the SEP device node.
+ *
+ * Returns zero on success otherwise an error code.
+ */
+static int sep_request_daemon_open(struct inode *inode, struct file *filp)
+{
+ struct sep_device *sep = sep_dev;
+ int error = 0;
+
+ filp->private_data = sep;
+
+ /* There is supposed to be only one request daemon */
+ if (test_and_set_bit(0, &sep->request_daemon_open))
+ error = -EBUSY;
+ return error;
+}
+
+/**
+ * sep_request_daemon_release - close a SEP daemon
+ * @inode: inode of SEP device
+ * @filp: file handle being closed
+ *
+ * Called on the final close of a SEP daemon.
+ */
+static int sep_request_daemon_release(struct inode *inode, struct file *filp)
+{
+ struct sep_device *sep = filp->private_data;
+
+ dev_dbg(&sep->pdev->dev, "Request daemon release for pid %d\n",
+ current->pid);
+
+ /* Clear the request_daemon_open flag */
+ clear_bit(0, &sep->request_daemon_open);
+ return 0;
+}
+
+/**
+ * sep_req_daemon_send_reply_command_handler - poke the SEP
+ * @sep: struct sep_device *
+ *
+ * This function raises interrupt to SEPm that signals that is has a
+ * new command from HOST
+ */
+static int sep_req_daemon_send_reply_command_handler(struct sep_device *sep)
+{
+ unsigned long lck_flags;
+
+ sep_dump_message(sep);
+
+ /* Counters are lockable region */
+ spin_lock_irqsave(&sep->snd_rply_lck, lck_flags);
+ sep->send_ct++;
+ sep->reply_ct++;
+
+ /* Send the interrupt to SEP */
+ sep_write_reg(sep, HW_HOST_HOST_SEP_GPR2_REG_ADDR, sep->send_ct);
+ sep->send_ct++;
+
+ spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
+
+ dev_dbg(&sep->pdev->dev,
+ "sep_req_daemon_send_reply send_ct %lx reply_ct %lx\n",
+ sep->send_ct, sep->reply_ct);
+
+ return 0;
+}
+
+
+/**
+ * sep_free_dma_table_data_handler - free DMA table
+ * @sep: pointere to struct sep_device
+ *
+ * Handles the request to free DMA table for synchronic actions
+ */
+static int sep_free_dma_table_data_handler(struct sep_device *sep)
+{
+ int count;
+ int dcb_counter;
+ /* Pointer to the current dma_resource struct */
+ struct sep_dma_resource *dma;
+
+ for (dcb_counter = 0; dcb_counter < sep->nr_dcb_creat; dcb_counter++) {
+ dma = &sep->dma_res_arr[dcb_counter];
+
+ /* Unmap and free input map array */
+ if (dma->in_map_array) {
+ for (count = 0; count < dma->in_num_pages; count++) {
+ dma_unmap_page(&sep->pdev->dev,
+ dma->in_map_array[count].dma_addr,
+ dma->in_map_array[count].size,
+ DMA_TO_DEVICE);
+ }
+ kfree(dma->in_map_array);
+ }
+
+ /* Unmap output map array, DON'T free it yet */
+ if (dma->out_map_array) {
+ for (count = 0; count < dma->out_num_pages; count++) {
+ dma_unmap_page(&sep->pdev->dev,
+ dma->out_map_array[count].dma_addr,
+ dma->out_map_array[count].size,
+ DMA_FROM_DEVICE);
+ }
+ kfree(dma->out_map_array);
+ }
+
+ /* Free page cache for output */
+ if (dma->in_page_array) {
+ for (count = 0; count < dma->in_num_pages; count++) {
+ flush_dcache_page(dma->in_page_array[count]);
+ page_cache_release(dma->in_page_array[count]);
+ }
+ kfree(dma->in_page_array);
+ }
+
+ if (dma->out_page_array) {
+ for (count = 0; count < dma->out_num_pages; count++) {
+ if (!PageReserved(dma->out_page_array[count]))
+ SetPageDirty(dma->out_page_array[count]);
+ flush_dcache_page(dma->out_page_array[count]);
+ page_cache_release(dma->out_page_array[count]);
+ }
+ kfree(dma->out_page_array);
+ }
+
+ /* Reset all the values */
+ dma->in_page_array = NULL;
+ dma->out_page_array = NULL;
+ dma->in_num_pages = 0;
+ dma->out_num_pages = 0;
+ dma->in_map_array = NULL;
+ dma->out_map_array = NULL;
+ dma->in_map_num_entries = 0;
+ dma->out_map_num_entries = 0;
+ }
+
+ sep->nr_dcb_creat = 0;
+ sep->num_lli_tables_created = 0;
+
+ return 0;
+}
+
+/**
+ * sep_request_daemon_mmap - maps the shared area to user space
+ * @filp: pointer to struct file
+ * @vma: pointer to vm_area_struct
+ *
+ * Called by the kernel when the daemon attempts an mmap() syscall
+ * using our handle.
+ */
+static int sep_request_daemon_mmap(struct file *filp,
+ struct vm_area_struct *vma)
+{
+ struct sep_device *sep = filp->private_data;
+ dma_addr_t bus_address;
+ int error = 0;
+
+ if ((vma->vm_end - vma->vm_start) > SEP_DRIVER_MMMAP_AREA_SIZE) {
+ error = -EINVAL;
+ goto end_function;
+ }
+
+ /* Get physical address */
+ bus_address = sep->shared_bus;
+
+ if (remap_pfn_range(vma, vma->vm_start, bus_address >> PAGE_SHIFT,
+ vma->vm_end - vma->vm_start, vma->vm_page_prot)) {
+
+ dev_warn(&sep->pdev->dev, "remap_page_range failed\n");
+ error = -EAGAIN;
+ goto end_function;
+ }
+
+end_function:
+ return error;
+}
+
+/**
+ * sep_request_daemon_poll - poll implementation
+ * @sep: struct sep_device * for current SEP device
+ * @filp: struct file * for open file
+ * @wait: poll_table * for poll
+ *
+ * Called when our device is part of a poll() or select() syscall
+ */
+static unsigned int sep_request_daemon_poll(struct file *filp,
+ poll_table *wait)
+{
+ u32 mask = 0;
+ /* GPR2 register */
+ u32 retval2;
+ unsigned long lck_flags;
+ struct sep_device *sep = filp->private_data;
+
+ poll_wait(filp, &sep->event_request_daemon, wait);
+
+ dev_dbg(&sep->pdev->dev, "daemon poll: send_ct is %lx reply ct is %lx\n",
+ sep->send_ct, sep->reply_ct);
+
+ spin_lock_irqsave(&sep->snd_rply_lck, lck_flags);
+ /* Check if the data is ready */
+ if (sep->send_ct == sep->reply_ct) {
+ spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
+
+ retval2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
+ dev_dbg(&sep->pdev->dev,
+ "daemon poll: data check (GPR2) is %x\n", retval2);
+
+ /* Check if PRINT request */
+ if ((retval2 >> 30) & 0x1) {
+ dev_dbg(&sep->pdev->dev, "daemon poll: PRINTF request in\n");
+ mask |= POLLIN;
+ goto end_function;
+ }
+ /* Check if NVS request */
+ if (retval2 >> 31) {
+ dev_dbg(&sep->pdev->dev, "daemon poll: NVS request in\n");
+ mask |= POLLPRI | POLLWRNORM;
+ }
+ } else {
+ spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
+ dev_dbg(&sep->pdev->dev,
+ "daemon poll: no reply received; returning 0\n");
+ mask = 0;
+ }
+end_function:
+ return mask;
+}
+
+/**
+ * sep_release - close a SEP device
+ * @inode: inode of SEP device
+ * @filp: file handle being closed
+ *
+ * Called on the final close of a SEP device.
+ */
+static int sep_release(struct inode *inode, struct file *filp)
+{
+ struct sep_device *sep = filp->private_data;
+
+ dev_dbg(&sep->pdev->dev, "Release for pid %d\n", current->pid);
+
+ mutex_lock(&sep->sep_mutex);
+ /* Is this the process that has a transaction open?
+ * If so, lets reset pid_doing_transaction to 0 and
+ * clear the in use flags, and then wake up sep_event
+ * so that other processes can do transactions
+ */
+ if (sep->pid_doing_transaction == current->pid) {
+ clear_bit(SEP_MMAP_LOCK_BIT, &sep->in_use_flags);
+ clear_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags);
+ sep_free_dma_table_data_handler(sep);
+ wake_up(&sep->event);
+ sep->pid_doing_transaction = 0;
+ }
+
+ mutex_unlock(&sep->sep_mutex);
+ return 0;
+}
+
+/**
+ * sep_mmap - maps the shared area to user space
+ * @filp: pointer to struct file
+ * @vma: pointer to vm_area_struct
+ *
+ * Called on an mmap of our space via the normal SEP device
+ */
+static int sep_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+ dma_addr_t bus_addr;
+ struct sep_device *sep = filp->private_data;
+ unsigned long error = 0;
+
+ /* Set the transaction busy (own the device) */
+ wait_event_interruptible(sep->event,
+ test_and_set_bit(SEP_MMAP_LOCK_BIT,
+ &sep->in_use_flags) == 0);
+
+ if (signal_pending(current)) {
+ error = -EINTR;
+ goto end_function_with_error;
+ }
+ /*
+ * The pid_doing_transaction indicates that this process
+ * now owns the facilities to performa a transaction with
+ * the SEP. While this process is performing a transaction,
+ * no other process who has the SEP device open can perform
+ * any transactions. This method allows more than one process
+ * to have the device open at any given time, which provides
+ * finer granularity for device utilization by multiple
+ * processes.
+ */
+ mutex_lock(&sep->sep_mutex);
+ sep->pid_doing_transaction = current->pid;
+ mutex_unlock(&sep->sep_mutex);
+
+ /* Zero the pools and the number of data pool alocation pointers */
+ sep->data_pool_bytes_allocated = 0;
+ sep->num_of_data_allocations = 0;
+
+ /*
+ * Check that the size of the mapped range is as the size of the message
+ * shared area
+ */
+ if ((vma->vm_end - vma->vm_start) > SEP_DRIVER_MMMAP_AREA_SIZE) {
+ error = -EINVAL;
+ goto end_function_with_error;
+ }
+
+ dev_dbg(&sep->pdev->dev, "shared_addr is %p\n", sep->shared_addr);
+
+ /* Get bus address */
+ bus_addr = sep->shared_bus;
+
+ if (remap_pfn_range(vma, vma->vm_start, bus_addr >> PAGE_SHIFT,
+ vma->vm_end - vma->vm_start, vma->vm_page_prot)) {
+ dev_warn(&sep->pdev->dev, "remap_page_range failed\n");
+ error = -EAGAIN;
+ goto end_function_with_error;
+ }
+ goto end_function;
+
+end_function_with_error:
+ /* Clear the bit */
+ clear_bit(SEP_MMAP_LOCK_BIT, &sep->in_use_flags);
+ mutex_lock(&sep->sep_mutex);
+ sep->pid_doing_transaction = 0;
+ mutex_unlock(&sep->sep_mutex);
+
+ /* Raise event for stuck contextes */
+
+ wake_up(&sep->event);
+
+end_function:
+ return error;
+}
+
+/**
+ * sep_poll - poll handler
+ * @filp: pointer to struct file
+ * @wait: pointer to poll_table
+ *
+ * Called by the OS when the kernel is asked to do a poll on
+ * a SEP file handle.
+ */
+static unsigned int sep_poll(struct file *filp, poll_table *wait)
+{
+ u32 mask = 0;
+ u32 retval = 0;
+ u32 retval2 = 0;
+ unsigned long lck_flags;
+
+ struct sep_device *sep = filp->private_data;
+
+ /* Am I the process that owns the transaction? */
+ mutex_lock(&sep->sep_mutex);
+ if (current->pid != sep->pid_doing_transaction) {
+ dev_dbg(&sep->pdev->dev, "poll; wrong pid\n");
+ mask = POLLERR;
+ mutex_unlock(&sep->sep_mutex);
+ goto end_function;
+ }
+ mutex_unlock(&sep->sep_mutex);
+
+ /* Check if send command or send_reply were activated previously */
+ if (!test_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags)) {
+ mask = POLLERR;
+ goto end_function;
+ }
+
+ /* Add the event to the polling wait table */
+ dev_dbg(&sep->pdev->dev, "poll: calling wait sep_event\n");
+
+ poll_wait(filp, &sep->event, wait);
+
+ dev_dbg(&sep->pdev->dev, "poll: send_ct is %lx reply ct is %lx\n",
+ sep->send_ct, sep->reply_ct);
+
+ /* Check if error occured during poll */
+ retval2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
+ if (retval2 != 0x0) {
+ dev_warn(&sep->pdev->dev, "poll; poll error %x\n", retval2);
+ mask |= POLLERR;
+ goto end_function;
+ }
+
+ spin_lock_irqsave(&sep->snd_rply_lck, lck_flags);
+
+ if (sep->send_ct == sep->reply_ct) {
+ spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
+ retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
+ dev_dbg(&sep->pdev->dev, "poll: data ready check (GPR2) %x\n",
+ retval);
+
+ /* Check if printf request */
+ if ((retval >> 30) & 0x1) {
+ dev_dbg(&sep->pdev->dev, "poll: SEP printf request\n");
+ wake_up(&sep->event_request_daemon);
+ goto end_function;
+ }
+
+ /* Check if the this is SEP reply or request */
+ if (retval >> 31) {
+ dev_dbg(&sep->pdev->dev, "poll: SEP request\n");
+ wake_up(&sep->event_request_daemon);
+ } else {
+ dev_dbg(&sep->pdev->dev, "poll: normal return\n");
+ /* In case it is again by send_reply_comand */
+ clear_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags);
+ sep_dump_message(sep);
+ dev_dbg(&sep->pdev->dev,
+ "poll; SEP reply POLLIN | POLLRDNORM\n");
+ mask |= POLLIN | POLLRDNORM;
+ }
+ } else {
+ spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
+ dev_dbg(&sep->pdev->dev,
+ "poll; no reply received; returning mask of 0\n");
+ mask = 0;
+ }
+
+end_function:
+ return mask;
+}
+
+/**
+ * sep_time_address - address in SEP memory of time
+ * @sep: SEP device we want the address from
+ *
+ * Return the address of the two dwords in memory used for time
+ * setting.
+ */
+static u32 *sep_time_address(struct sep_device *sep)
+{
+ return sep->shared_addr + SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES;
+}
+
+/**
+ * sep_set_time - set the SEP time
+ * @sep: the SEP we are setting the time for
+ *
+ * Calculates time and sets it at the predefined address.
+ * Called with the SEP mutex held.
+ */
+static unsigned long sep_set_time(struct sep_device *sep)
+{
+ struct timeval time;
+ u32 *time_addr; /* Address of time as seen by the kernel */
+
+
+ do_gettimeofday(&time);
+
+ /* Set value in the SYSTEM MEMORY offset */
+ time_addr = sep_time_address(sep);
+
+ time_addr[0] = SEP_TIME_VAL_TOKEN;
+ time_addr[1] = time.tv_sec;
+
+ dev_dbg(&sep->pdev->dev, "time.tv_sec is %lu\n", time.tv_sec);
+ dev_dbg(&sep->pdev->dev, "time_addr is %p\n", time_addr);
+ dev_dbg(&sep->pdev->dev, "sep->shared_addr is %p\n", sep->shared_addr);
+
+ return time.tv_sec;
+}
+
+/**
+ * sep_set_caller_id_handler - insert caller id entry
+ * @sep: SEP device
+ * @arg: pointer to struct caller_id_struct
+ *
+ * Inserts the data into the caller id table. Note that this function
+ * falls under the ioctl lock
+ */
+static int sep_set_caller_id_handler(struct sep_device *sep, unsigned long arg)
+{
+ void __user *hash;
+ int error = 0;
+ int i;
+ struct caller_id_struct command_args;
+
+ for (i = 0; i < SEP_CALLER_ID_TABLE_NUM_ENTRIES; i++) {
+ if (sep->caller_id_table[i].pid == 0)
+ break;
+ }
+
+ if (i == SEP_CALLER_ID_TABLE_NUM_ENTRIES) {
+ dev_dbg(&sep->pdev->dev, "no more caller id entries left\n");
+ dev_dbg(&sep->pdev->dev, "maximum number is %d\n",
+ SEP_CALLER_ID_TABLE_NUM_ENTRIES);
+ error = -EUSERS;
+ goto end_function;
+ }
+
+ /* Copy the data */
+ if (copy_from_user(&command_args, (void __user *)arg,
+ sizeof(command_args))) {
+ error = -EFAULT;
+ goto end_function;
+ }
+
+ hash = (void __user *)(unsigned long)command_args.callerIdAddress;
+
+ if (!command_args.pid || !command_args.callerIdSizeInBytes) {
+ error = -EINVAL;
+ goto end_function;
+ }
+
+ dev_dbg(&sep->pdev->dev, "pid is %x\n", command_args.pid);
+ dev_dbg(&sep->pdev->dev, "callerIdSizeInBytes is %x\n",
+ command_args.callerIdSizeInBytes);
+
+ if (command_args.callerIdSizeInBytes >
+ SEP_CALLER_ID_HASH_SIZE_IN_BYTES) {
+ error = -EMSGSIZE;
+ goto end_function;
+ }
+
+ sep->caller_id_table[i].pid = command_args.pid;
+
+ if (copy_from_user(sep->caller_id_table[i].callerIdHash,
+ hash, command_args.callerIdSizeInBytes))
+ error = -EFAULT;
+end_function:
+ return error;
+}
+
+/**
+ * sep_set_current_caller_id - set the caller id
+ * @sep: pointer to struct_sep_device
+ *
+ * Set the caller ID (if it exists) to the SEP. Note that this
+ * function falls under the ioctl lock
+ */
+static int sep_set_current_caller_id(struct sep_device *sep)
+{
+ int i;
+ u32 *hash_buf_ptr;
+
+ /* Zero the previous value */
+ memset(sep->shared_addr + SEP_CALLER_ID_OFFSET_BYTES,
+ 0, SEP_CALLER_ID_HASH_SIZE_IN_BYTES);
+
+ for (i = 0; i < SEP_CALLER_ID_TABLE_NUM_ENTRIES; i++) {
+ if (sep->caller_id_table[i].pid == current->pid) {
+ dev_dbg(&sep->pdev->dev, "Caller Id found\n");
+
+ memcpy(sep->shared_addr + SEP_CALLER_ID_OFFSET_BYTES,
+ (void *)(sep->caller_id_table[i].callerIdHash),
+ SEP_CALLER_ID_HASH_SIZE_IN_BYTES);
+ break;
+ }
+ }
+ /* Ensure data is in little endian */
+ hash_buf_ptr = (u32 *)sep->shared_addr +
+ SEP_CALLER_ID_OFFSET_BYTES;
+
+ for (i = 0; i < SEP_CALLER_ID_HASH_SIZE_IN_WORDS; i++)
+ hash_buf_ptr[i] = cpu_to_le32(hash_buf_ptr[i]);
+
+ return 0;
+}
+
+/**
+ * sep_send_command_handler - kick off a command
+ * @sep: SEP being signalled
+ *
+ * This function raises interrupt to SEP that signals that is has a new
+ * command from the host
+ *
+ * Note that this function does fall under the ioctl lock
+ */
+static int sep_send_command_handler(struct sep_device *sep)
+{
+ unsigned long lck_flags;
+ int error = 0;
+
+ if (test_and_set_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags)) {
+ error = -EPROTO;
+ goto end_function;
+ }
+ sep_set_time(sep);
+
+ sep_set_current_caller_id(sep);
+
+ sep_dump_message(sep);
+
+ /* Update counter */
+ spin_lock_irqsave(&sep->snd_rply_lck, lck_flags);
+ sep->send_ct++;
+ spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
+
+ dev_dbg(&sep->pdev->dev,
+ "sep_send_command_handler send_ct %lx reply_ct %lx\n",
+ sep->send_ct, sep->reply_ct);
+
+ /* Send interrupt to SEP */
+ sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x2);
+
+end_function:
+ return error;
+}
+
+/**
+ * sep_allocate_data_pool_memory_handler -allocate pool memory
+ * @sep: pointer to struct sep_device
+ * @arg: pointer to struct alloc_struct
+ *
+ * This function handles the allocate data pool memory request
+ * This function returns calculates the bus address of the
+ * allocated memory, and the offset of this area from the mapped address.
+ * Therefore, the FVOs in user space can calculate the exact virtual
+ * address of this allocated memory
+ */
+static int sep_allocate_data_pool_memory_handler(struct sep_device *sep,
+ unsigned long arg)
+{
+ int error = 0;
+ struct alloc_struct command_args;
+
+ /* Holds the allocated buffer address in the system memory pool */
+ u32 *token_addr;
+
+ if (copy_from_user(&command_args, (void __user *)arg,
+ sizeof(struct alloc_struct))) {
+ error = -EFAULT;
+ goto end_function;
+ }
+
+ /* Allocate memory */
+ if ((sep->data_pool_bytes_allocated + command_args.num_bytes) >
+ SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) {
+ error = -ENOMEM;
+ goto end_function;
+ }
+
+ dev_dbg(&sep->pdev->dev,
+ "data pool bytes_allocated: %x\n", (int)sep->data_pool_bytes_allocated);
+ dev_dbg(&sep->pdev->dev,
+ "offset: %x\n", SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES);
+ /* Set the virtual and bus address */
+ command_args.offset = SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES +
+ sep->data_pool_bytes_allocated;
+
+ /* Place in the shared area that is known by the SEP */
+ token_addr = (u32 *)(sep->shared_addr +
+ SEP_DRIVER_DATA_POOL_ALLOCATION_OFFSET_IN_BYTES +
+ (sep->num_of_data_allocations)*2*sizeof(u32));
+
+ token_addr[0] = SEP_DATA_POOL_POINTERS_VAL_TOKEN;
+ token_addr[1] = (u32)sep->shared_bus +
+ SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES +
+ sep->data_pool_bytes_allocated;
+
+ /* Write the memory back to the user space */
+ error = copy_to_user((void *)arg, (void *)&command_args,
+ sizeof(struct alloc_struct));
+ if (error) {
+ error = -EFAULT;
+ goto end_function;
+ }
+
+ /* Update the allocation */
+ sep->data_pool_bytes_allocated += command_args.num_bytes;
+ sep->num_of_data_allocations += 1;
+
+end_function:
+ return error;
+}
+
+/**
+ * sep_lock_kernel_pages - map kernel pages for DMA
+ * @sep: pointer to struct sep_device
+ * @kernel_virt_addr: address of data buffer in kernel
+ * @data_size: size of data
+ * @lli_array_ptr: lli array
+ * @in_out_flag: input into device or output from device
+ *
+ * This function locks all the physical pages of the kernel virtual buffer
+ * and construct a basic lli array, where each entry holds the physical
+ * page address and the size that application data holds in this page
+ * This function is used only during kernel crypto mod calls from within
+ * the kernel (when ioctl is not used)
+ */
+static int sep_lock_kernel_pages(struct sep_device *sep,
+ unsigned long kernel_virt_addr,
+ u32 data_size,
+ struct sep_lli_entry **lli_array_ptr,
+ int in_out_flag)
+
+{
+ int error = 0;
+ /* Array of lli */
+ struct sep_lli_entry *lli_array;
+ /* Map array */
+ struct sep_dma_map *map_array;
+
+ dev_dbg(&sep->pdev->dev, "lock kernel pages kernel_virt_addr is %08lx\n",
+ (unsigned long)kernel_virt_addr);
+ dev_dbg(&sep->pdev->dev, "data_size is %x\n", data_size);
+
+ lli_array = kmalloc(sizeof(struct sep_lli_entry), GFP_ATOMIC);
+ if (!lli_array) {
+ error = -ENOMEM;
+ goto end_function;
+ }
+ map_array = kmalloc(sizeof(struct sep_dma_map), GFP_ATOMIC);
+ if (!map_array) {
+ error = -ENOMEM;
+ goto end_function_with_error;
+ }
+
+ map_array[0].dma_addr =
+ dma_map_single(&sep->pdev->dev, (void *)kernel_virt_addr,
+ data_size, DMA_BIDIRECTIONAL);
+ map_array[0].size = data_size;
+
+
+ /*
+ * Set the start address of the first page - app data may start not at
+ * the beginning of the page
+ */
+ lli_array[0].bus_address = (u32)map_array[0].dma_addr;
+ lli_array[0].block_size = map_array[0].size;
+
+ dev_dbg(&sep->pdev->dev,
+ "lli_array[0].bus_address is %08lx, lli_array[0].block_size is %x\n",
+ (unsigned long)lli_array[0].bus_address,
+ lli_array[0].block_size);
+
+ /* Set the output parameters */
+ if (in_out_flag == SEP_DRIVER_IN_FLAG) {
+ *lli_array_ptr = lli_array;
+ sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = 1;
+ sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = NULL;
+ sep->dma_res_arr[sep->nr_dcb_creat].in_map_array = map_array;
+ sep->dma_res_arr[sep->nr_dcb_creat].in_map_num_entries = 1;
+ } else {
+ *lli_array_ptr = lli_array;
+ sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages = 1;
+ sep->dma_res_arr[sep->nr_dcb_creat].out_page_array = NULL;
+ sep->dma_res_arr[sep->nr_dcb_creat].out_map_array = map_array;
+ sep->dma_res_arr[sep->nr_dcb_creat].out_map_num_entries = 1;
+ }
+ goto end_function;
+
+end_function_with_error:
+ kfree(lli_array);
+
+end_function:
+ return error;
+}
+
+/**
+ * sep_lock_user_pages - lock and map user pages for DMA
+ * @sep: pointer to struct sep_device
+ * @app_virt_addr: user memory data buffer
+ * @data_size: size of data buffer
+ * @lli_array_ptr: lli array
+ * @in_out_flag: input or output to device
+ *
+ * This function locks all the physical pages of the application
+ * virtual buffer and construct a basic lli array, where each entry
+ * holds the physical page address and the size that application
+ * data holds in this physical pages
+ */
+static int sep_lock_user_pages(struct sep_device *sep,
+ u32 app_virt_addr,
+ u32 data_size,
+ struct sep_lli_entry **lli_array_ptr,
+ int in_out_flag)
+
+{
+ int error = 0;
+ u32 count;
+ int result;
+ /* The the page of the end address of the user space buffer */
+ u32 end_page;
+ /* The page of the start address of the user space buffer */
+ u32 start_page;
+ /* The range in pages */
+ u32 num_pages;
+ /* Array of pointers to page */
+ struct page **page_array;
+ /* Array of lli */
+ struct sep_lli_entry *lli_array;
+ /* Map array */
+ struct sep_dma_map *map_array;
+ /* Direction of the DMA mapping for locked pages */
+ enum dma_data_direction dir;
+
+ /* Set start and end pages and num pages */
+ end_page = (app_virt_addr + data_size - 1) >> PAGE_SHIFT;
+ start_page = app_virt_addr >> PAGE_SHIFT;
+ num_pages = end_page - start_page + 1;
+
+ dev_dbg(&sep->pdev->dev, "lock user pages app_virt_addr is %x\n", app_virt_addr);
+ dev_dbg(&sep->pdev->dev, "data_size is %x\n", data_size);
+ dev_dbg(&sep->pdev->dev, "start_page is %x\n", start_page);
+ dev_dbg(&sep->pdev->dev, "end_page is %x\n", end_page);
+ dev_dbg(&sep->pdev->dev, "num_pages is %x\n", num_pages);
+
+ /* Allocate array of pages structure pointers */
+ page_array = kmalloc(sizeof(struct page *) * num_pages, GFP_ATOMIC);
+ if (!page_array) {
+ error = -ENOMEM;
+ goto end_function;
+ }
+ map_array = kmalloc(sizeof(struct sep_dma_map) * num_pages, GFP_ATOMIC);
+ if (!map_array) {
+ dev_warn(&sep->pdev->dev, "kmalloc for map_array failed\n");
+ error = -ENOMEM;
+ goto end_function_with_error1;
+ }
+
+ lli_array = kmalloc(sizeof(struct sep_lli_entry) * num_pages,
+ GFP_ATOMIC);
+
+ if (!lli_array) {
+ dev_warn(&sep->pdev->dev, "kmalloc for lli_array failed\n");
+ error = -ENOMEM;
+ goto end_function_with_error2;
+ }
+
+ /* Convert the application virtual address into a set of physical */
+ down_read(¤t->mm->mmap_sem);
+ result = get_user_pages(current, current->mm, app_virt_addr,
+ num_pages,
+ ((in_out_flag == SEP_DRIVER_IN_FLAG) ? 0 : 1),
+ 0, page_array, NULL);
+
+ up_read(¤t->mm->mmap_sem);
+
+ /* Check the number of pages locked - if not all then exit with error */
+ if (result != num_pages) {
+ dev_warn(&sep->pdev->dev,
+ "not all pages locked by get_user_pages\n");
+ error = -ENOMEM;
+ goto end_function_with_error3;
+ }
+
+ dev_dbg(&sep->pdev->dev, "get_user_pages succeeded\n");
+
+ /* Set direction */
+ if (in_out_flag == SEP_DRIVER_IN_FLAG)
+ dir = DMA_TO_DEVICE;
+ else
+ dir = DMA_FROM_DEVICE;
+
+ /*
+ * Fill the array using page array data and
+ * map the pages - this action will also flush the cache as needed
+ */
+ for (count = 0; count < num_pages; count++) {
+ /* Fill the map array */
+ map_array[count].dma_addr =
+ dma_map_page(&sep->pdev->dev, page_array[count],
+ 0, PAGE_SIZE, /*dir*/DMA_BIDIRECTIONAL);
+
+ map_array[count].size = PAGE_SIZE;
+
+ /* Fill the lli array entry */
+ lli_array[count].bus_address = (u32)map_array[count].dma_addr;
+ lli_array[count].block_size = PAGE_SIZE;
+
+ dev_warn(&sep->pdev->dev, "lli_array[%x].bus_address is %08lx, lli_array[%x].block_size is %x\n",
+ count, (unsigned long)lli_array[count].bus_address,
+ count, lli_array[count].block_size);
+ }
+
+ /* Check the offset for the first page */
+ lli_array[0].bus_address =
+ lli_array[0].bus_address + (app_virt_addr & (~PAGE_MASK));
+
+ /* Check that not all the data is in the first page only */
+ if ((PAGE_SIZE - (app_virt_addr & (~PAGE_MASK))) >= data_size)
+ lli_array[0].block_size = data_size;
+ else
+ lli_array[0].block_size =
+ PAGE_SIZE - (app_virt_addr & (~PAGE_MASK));
+
+ dev_dbg(&sep->pdev->dev,
+ "lli_array[0].bus_address is %08lx, lli_array[0].block_size is %x\n",
+ (unsigned long)lli_array[count].bus_address,
+ lli_array[count].block_size);
+
+ /* Check the size of the last page */
+ if (num_pages > 1) {
+ lli_array[num_pages - 1].block_size =
+ (app_virt_addr + data_size) & (~PAGE_MASK);
+
+ dev_warn(&sep->pdev->dev,
+ "lli_array[%x].bus_address is %08lx, lli_array[%x].block_size is %x\n",
+ num_pages - 1,
+ (unsigned long)lli_array[count].bus_address,
+ num_pages - 1,
+ lli_array[count].block_size);
+ }
+
+ /* Set output params acording to the in_out flag */
+ if (in_out_flag == SEP_DRIVER_IN_FLAG) {
+ *lli_array_ptr = lli_array;
+ sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = num_pages;
+ sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = page_array;
+ sep->dma_res_arr[sep->nr_dcb_creat].in_map_array = map_array;
+ sep->dma_res_arr[sep->nr_dcb_creat].in_map_num_entries =
+ num_pages;
+ } else {
+ *lli_array_ptr = lli_array;
+ sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages = num_pages;
+ sep->dma_res_arr[sep->nr_dcb_creat].out_page_array =
+ page_array;
+ sep->dma_res_arr[sep->nr_dcb_creat].out_map_array = map_array;
+ sep->dma_res_arr[sep->nr_dcb_creat].out_map_num_entries =
+ num_pages;
+ }
+ goto end_function;
+
+end_function_with_error3:
+ /* Free lli array */
+ kfree(lli_array);
+
+end_function_with_error2:
+ kfree(map_array);
+
+end_function_with_error1:
+ /* Free page array */
+ kfree(page_array);
+
+end_function:
+ return error;
+}
+
+/**
+ * u32 sep_calculate_lli_table_max_size - size the LLI table
+ * @sep: pointer to struct sep_device
+ * @lli_in_array_ptr
+ * @num_array_entries
+ * @last_table_flag
+ *
+ * This function calculates the size of data that can be inserted into
+ * the lli table from this array, such that either the table is full
+ * (all entries are entered), or there are no more entries in the
+ * lli array
+ */
+static u32 sep_calculate_lli_table_max_size(struct sep_device *sep,
+ struct sep_lli_entry *lli_in_array_ptr,
+ u32 num_array_entries,
+ u32 *last_table_flag)
+{
+ u32 counter;
+ /* Table data size */
+ u32 table_data_size = 0;
+ /* Data size for the next table */
+ u32 next_table_data_size;
+
+ *last_table_flag = 0;
+
+ /*
+ * Calculate the data in the out lli table till we fill the whole
+ * table or till the data has ended
+ */
+ for (counter = 0;
+ (counter < (SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP - 1)) &&
+ (counter < num_array_entries); counter++)
+ table_data_size += lli_in_array_ptr[counter].block_size;
+
+ /*
+ * Check if we reached the last entry,
+ * meaning this ia the last table to build,
+ * and no need to check the block alignment
+ */
+ if (counter == num_array_entries) {
+ /* Set the last table flag */
+ *last_table_flag = 1;
+ goto end_function;
+ }
+
+ /*
+ * Calculate the data size of the next table.
+ * Stop if no entries left or if data size is more the DMA restriction
+ */
+ next_table_data_size = 0;
+ for (; counter < num_array_entries; counter++) {
+ next_table_data_size += lli_in_array_ptr[counter].block_size;
+ if (next_table_data_size >= SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE)
+ break;
+ }
+
+ /*
+ * Check if the next table data size is less then DMA rstriction.
+ * if it is - recalculate the current table size, so that the next
+ * table data size will be adaquete for DMA
+ */
+ if (next_table_data_size &&
+ next_table_data_size < SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE)
+
+ table_data_size -= (SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE -
+ next_table_data_size);
+
+end_function:
+ return table_data_size;
+}
+
+/**
+ * sep_build_lli_table - build an lli array for the given table
+ * @sep: pointer to struct sep_device
+ * @lli_array_ptr: pointer to lli array
+ * @lli_table_ptr: pointer to lli table
+ * @num_processed_entries_ptr: pointer to number of entries
+ * @num_table_entries_ptr: pointer to number of tables
+ * @table_data_size: total data size
+ *
+ * Builds ant lli table from the lli_array according to
+ * the given size of data
+ */
+static void sep_build_lli_table(struct sep_device *sep,
+ struct sep_lli_entry *lli_array_ptr,
+ struct sep_lli_entry *lli_table_ptr,
+ u32 *num_processed_entries_ptr,
+ u32 *num_table_entries_ptr,
+ u32 table_data_size)
+{
+ /* Current table data size */
+ u32 curr_table_data_size;
+ /* Counter of lli array entry */
+ u32 array_counter;
+
+ /* Init currrent table data size and lli array entry counter */
+ curr_table_data_size = 0;
+ array_counter = 0;
+ *num_table_entries_ptr = 1;
+
+ dev_dbg(&sep->pdev->dev, "build lli table table_data_size is %x\n", table_data_size);
+
+ /* Fill the table till table size reaches the needed amount */
+ while (curr_table_data_size < table_data_size) {
+ /* Update the number of entries in table */
+ (*num_table_entries_ptr)++;
+
+ lli_table_ptr->bus_address =
+ cpu_to_le32(lli_array_ptr[array_counter].bus_address);
+
+ lli_table_ptr->block_size =
+ cpu_to_le32(lli_array_ptr[array_counter].block_size);
+
+ curr_table_data_size += lli_array_ptr[array_counter].block_size;
+
+ dev_dbg(&sep->pdev->dev, "lli_table_ptr is %p\n",
+ lli_table_ptr);
+ dev_dbg(&sep->pdev->dev, "lli_table_ptr->bus_address is %08lx\n",
+ (unsigned long)lli_table_ptr->bus_address);
+ dev_dbg(&sep->pdev->dev, "lli_table_ptr->block_size is %x\n",
+ lli_table_ptr->block_size);
+
+ /* Check for overflow of the table data */
+ if (curr_table_data_size > table_data_size) {
+ dev_dbg(&sep->pdev->dev,
+ "curr_table_data_size too large\n");
+
+ /* Update the size of block in the table */
+ lli_table_ptr->block_size -=
+ cpu_to_le32((curr_table_data_size - table_data_size));
+
+ /* Update the physical address in the lli array */
+ lli_array_ptr[array_counter].bus_address +=
+ cpu_to_le32(lli_table_ptr->block_size);
+
+ /* Update the block size left in the lli array */
+ lli_array_ptr[array_counter].block_size =
+ (curr_table_data_size - table_data_size);
+ } else
+ /* Advance to the next entry in the lli_array */
+ array_counter++;
+
+ dev_dbg(&sep->pdev->dev,
+ "lli_table_ptr->bus_address is %08lx\n",
+ (unsigned long)lli_table_ptr->bus_address);
+ dev_dbg(&sep->pdev->dev,
+ "lli_table_ptr->block_size is %x\n",
+ lli_table_ptr->block_size);
+
+ /* Move to the next entry in table */
+ lli_table_ptr++;
+ }
+
+ /* Set the info entry to default */
+ lli_table_ptr->bus_address = 0xffffffff;
+ lli_table_ptr->block_size = 0;
+
+ /* Set the output parameter */
+ *num_processed_entries_ptr += array_counter;
+
+}
+
+/**
+ * sep_shared_area_virt_to_bus - map shared area to bus address
+ * @sep: pointer to struct sep_device
+ * @virt_address: virtual address to convert
+ *
+ * This functions returns the physical address inside shared area according
+ * to the virtual address. It can be either on the externa RAM device
+ * (ioremapped), or on the system RAM
+ * This implementation is for the external RAM
+ */
+static dma_addr_t sep_shared_area_virt_to_bus(struct sep_device *sep,
+ void *virt_address)
+{
+ dev_dbg(&sep->pdev->dev, "sh virt to phys v %p\n", virt_address);
+ dev_dbg(&sep->pdev->dev, "sh virt to phys p %08lx\n",
+ (unsigned long)
+ sep->shared_bus + (virt_address - sep->shared_addr));
+
+ return sep->shared_bus + (size_t)(virt_address - sep->shared_addr);
+}
+
+/**
+ * sep_shared_area_bus_to_virt - map shared area bus address to kernel
+ * @sep: pointer to struct sep_device
+ * @bus_address: bus address to convert
+ *
+ * This functions returns the virtual address inside shared area
+ * according to the physical address. It can be either on the
+ * externa RAM device (ioremapped), or on the system RAM
+ * This implementation is for the external RAM
+ */
+static void *sep_shared_area_bus_to_virt(struct sep_device *sep,
+ dma_addr_t bus_address)
+{
+ dev_dbg(&sep->pdev->dev, "shared bus to virt b=%lx v=%lx\n",
+ (unsigned long)bus_address, (unsigned long)(sep->shared_addr +
+ (size_t)(bus_address - sep->shared_bus)));
+
+ return sep->shared_addr + (size_t)(bus_address - sep->shared_bus);
+}
+
+/**
+ * sep_debug_print_lli_tables - dump LLI table
+ * @sep: pointer to struct sep_device
+ * @lli_table_ptr: pointer to sep_lli_entry
+ * @num_table_entries: number of entries
+ * @table_data_size: total data size
+ *
+ * Walk the the list of the print created tables and print all the data
+ */
+static void sep_debug_print_lli_tables(struct sep_device *sep,
+ struct sep_lli_entry *lli_table_ptr,
+ unsigned long num_table_entries,
+ unsigned long table_data_size)
+{
+ unsigned long table_count = 1;
+ unsigned long entries_count = 0;
+
+ dev_dbg(&sep->pdev->dev, "sep_debug_print_lli_tables start\n");
+
+ while ((unsigned long) lli_table_ptr->bus_address != 0xffffffff) {
+ dev_dbg(&sep->pdev->dev,
+ "lli table %08lx, table_data_size is %lu\n",
+ table_count, table_data_size);
+ dev_dbg(&sep->pdev->dev, "num_table_entries is %lu\n",
+ num_table_entries);
+
+ /* Print entries of the table (without info entry) */
+ for (entries_count = 0; entries_count < num_table_entries;
+ entries_count++, lli_table_ptr++) {
+
+ dev_dbg(&sep->pdev->dev,
+ "lli_table_ptr address is %08lx\n",
+ (unsigned long) lli_table_ptr);
+
+ dev_dbg(&sep->pdev->dev,
+ "phys address is %08lx block size is %x\n",
+ (unsigned long)lli_table_ptr->bus_address,
+ lli_table_ptr->block_size);
+ }
+ /* Point to the info entry */
+ lli_table_ptr--;
+
+ dev_dbg(&sep->pdev->dev,
+ "phys lli_table_ptr->block_size is %x\n",
+ lli_table_ptr->block_size);
+
+ dev_dbg(&sep->pdev->dev,
+ "phys lli_table_ptr->physical_address is %08lu\n",
+ (unsigned long)lli_table_ptr->bus_address);
+
+
+ table_data_size = lli_table_ptr->block_size & 0xffffff;
+ num_table_entries = (lli_table_ptr->block_size >> 24) & 0xff;
+
+ dev_dbg(&sep->pdev->dev,
+ "phys table_data_size is %lu num_table_entries is"
+ " %lu bus_address is%lu\n", table_data_size,
+ num_table_entries, (unsigned long)lli_table_ptr->bus_address);
+
+ if ((unsigned long)lli_table_ptr->bus_address != 0xffffffff)
+ lli_table_ptr = (struct sep_lli_entry *)
+ sep_shared_bus_to_virt(sep,
+ (unsigned long)lli_table_ptr->bus_address);
+
+ table_count++;
+ }
+ dev_dbg(&sep->pdev->dev, "sep_debug_print_lli_tables end\n");
+}
+
+
+/**
+ * sep_prepare_empty_lli_table - create a blank LLI table
+ * @sep: pointer to struct sep_device
+ * @lli_table_addr_ptr: pointer to lli table
+ * @num_entries_ptr: pointer to number of entries
+ * @table_data_size_ptr: point to table data size
+ *
+ * This function creates empty lli tables when there is no data
+ */
+static void sep_prepare_empty_lli_table(struct sep_device *sep,
+ dma_addr_t *lli_table_addr_ptr,
+ u32 *num_entries_ptr,
+ u32 *table_data_size_ptr)
+{
+ struct sep_lli_entry *lli_table_ptr;
+
+ /* Find the area for new table */
+ lli_table_ptr =
+ (struct sep_lli_entry *)(sep->shared_addr +
+ SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
+ sep->num_lli_tables_created * sizeof(struct sep_lli_entry) *
+ SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP);
+
+ lli_table_ptr->bus_address = 0;
+ lli_table_ptr->block_size = 0;
+
+ lli_table_ptr++;
+ lli_table_ptr->bus_address = 0xFFFFFFFF;
+ lli_table_ptr->block_size = 0;
+
+ /* Set the output parameter value */
+ *lli_table_addr_ptr = sep->shared_bus +
+ SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
+ sep->num_lli_tables_created *
+ sizeof(struct sep_lli_entry) *
+ SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP;
+
+ /* Set the num of entries and table data size for empty table */
+ *num_entries_ptr = 2;
+ *table_data_size_ptr = 0;
+
+ /* Update the number of created tables */
+ sep->num_lli_tables_created++;
+}
+
+/**
+ * sep_prepare_input_dma_table - prepare input DMA mappings
+ * @sep: pointer to struct sep_device
+ * @data_size:
+ * @block_size:
+ * @lli_table_ptr:
+ * @num_entries_ptr:
+ * @table_data_size_ptr:
+ * @is_kva: set for kernel data (kernel cryptio call)
+ *
+ * This function prepares only input DMA table for synhronic symmetric
+ * operations (HASH)
+ * Note that all bus addresses that are passed to the SEP
+ * are in 32 bit format; the SEP is a 32 bit device
+ */
+static int sep_prepare_input_dma_table(struct sep_device *sep,
+ unsigned long app_virt_addr,
+ u32 data_size,
+ u32 block_size,
+ dma_addr_t *lli_table_ptr,
+ u32 *num_entries_ptr,
+ u32 *table_data_size_ptr,
+ bool is_kva)
+{
+ int error = 0;
+ /* Pointer to the info entry of the table - the last entry */
+ struct sep_lli_entry *info_entry_ptr;
+ /* Array of pointers to page */
+ struct sep_lli_entry *lli_array_ptr;
+ /* Points to the first entry to be processed in the lli_in_array */
+ u32 current_entry = 0;
+ /* Num entries in the virtual buffer */
+ u32 sep_lli_entries = 0;
+ /* Lli table pointer */
+ struct sep_lli_entry *in_lli_table_ptr;
+ /* The total data in one table */
+ u32 table_data_size = 0;
+ /* Flag for last table */
+ u32 last_table_flag = 0;
+ /* Number of entries in lli table */
+ u32 num_entries_in_table = 0;
+ /* Next table address */
+ void *lli_table_alloc_addr = 0;
+
+ dev_dbg(&sep->pdev->dev, "prepare intput dma table data_size is %x\n", data_size);
+ dev_dbg(&sep->pdev->dev, "block_size is %x\n", block_size);
+
+ /* Initialize the pages pointers */
+ sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = NULL;
+ sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = 0;
+
+ /* Set the kernel address for first table to be allocated */
+ lli_table_alloc_addr = (void *)(sep->shared_addr +
+ SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
+ sep->num_lli_tables_created * sizeof(struct sep_lli_entry) *
+ SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP);
+
+ if (data_size == 0) {
+ /* Special case - create meptu table - 2 entries, zero data */
+ sep_prepare_empty_lli_table(sep, lli_table_ptr,
+ num_entries_ptr, table_data_size_ptr);
+ goto update_dcb_counter;
+ }
+
+ /* Check if the pages are in Kernel Virtual Address layout */
+ if (is_kva == true)
+ /* Lock the pages in the kernel */
+ error = sep_lock_kernel_pages(sep, app_virt_addr,
+ data_size, &lli_array_ptr, SEP_DRIVER_IN_FLAG);
+ else
+ /*
+ * Lock the pages of the user buffer
+ * and translate them to pages
+ */
+ error = sep_lock_user_pages(sep, app_virt_addr,
+ data_size, &lli_array_ptr, SEP_DRIVER_IN_FLAG);
+
+ if (error)
+ goto end_function;
+
+ dev_dbg(&sep->pdev->dev, "output sep_in_num_pages is %x\n",
+ sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages);
+
+ current_entry = 0;
+ info_entry_ptr = NULL;
+
+ sep_lli_entries = sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages;
+
+ /* Loop till all the entries in in array are not processed */
+ while (current_entry < sep_lli_entries) {
+
+ /* Set the new input and output tables */
+ in_lli_table_ptr =
+ (struct sep_lli_entry *)lli_table_alloc_addr;
+
+ lli_table_alloc_addr += sizeof(struct sep_lli_entry) *
+ SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP;
+
+ if (lli_table_alloc_addr >
+ ((void *)sep->shared_addr +
+ SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
+ SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES)) {
+
+ error = -ENOMEM;
+ goto end_function_error;
+
+ }
+
+ /* Update the number of created tables */
+ sep->num_lli_tables_created++;
+
+ /* Calculate the maximum size of data for input table */
+ table_data_size = sep_calculate_lli_table_max_size(sep,
+ &lli_array_ptr[current_entry],
+ (sep_lli_entries - current_entry),
+ &last_table_flag);
+
+ /*
+ * If this is not the last table -
+ * then allign it to the block size
+ */
+ if (!last_table_flag)
+ table_data_size =
+ (table_data_size / block_size) * block_size;
+
+ dev_dbg(&sep->pdev->dev, "output table_data_size is %x\n",
+ table_data_size);
+
+ /* Construct input lli table */
+ sep_build_lli_table(sep, &lli_array_ptr[current_entry],
+ in_lli_table_ptr,
+ ¤t_entry, &num_entries_in_table, table_data_size);
+
+ if (info_entry_ptr == NULL) {
+
+ /* Set the output parameters to physical addresses */
+ *lli_table_ptr = sep_shared_area_virt_to_bus(sep,
+ in_lli_table_ptr);
+ *num_entries_ptr = num_entries_in_table;
+ *table_data_size_ptr = table_data_size;
+
+ dev_dbg(&sep->pdev->dev,
+ "output lli_table_in_ptr is %08lx\n",
+ (unsigned long)*lli_table_ptr);
+
+ } else {
+ /* Update the info entry of the previous in table */
+ info_entry_ptr->bus_address =
+ sep_shared_area_virt_to_bus(sep,
+ in_lli_table_ptr);
+ info_entry_ptr->block_size =
+ ((num_entries_in_table) << 24) |
+ (table_data_size);
+ }
+ /* Save the pointer to the info entry of the current tables */
+ info_entry_ptr = in_lli_table_ptr + num_entries_in_table - 1;
+ }
+ /* Print input tables */
+ sep_debug_print_lli_tables(sep, (struct sep_lli_entry *)
+ sep_shared_area_bus_to_virt(sep, *lli_table_ptr),
+ *num_entries_ptr, *table_data_size_ptr);
+ /* The array of the pages */
+ kfree(lli_array_ptr);
+
+update_dcb_counter:
+ /* Update DCB counter */
+ sep->nr_dcb_creat++;
+ goto end_function;
+
+end_function_error:
+ /* Free all the allocated resources */
+ kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_map_array);
+ kfree(lli_array_ptr);
+ kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_page_array);
+
+end_function:
+ return error;
+
+}
+/**
+ * sep_construct_dma_tables_from_lli - prepare AES/DES mappings
+ * @sep: pointer to struct sep_device
+ * @lli_in_array:
+ * @sep_in_lli_entries:
+ * @lli_out_array:
+ * @sep_out_lli_entries
+ * @block_size
+ * @lli_table_in_ptr
+ * @lli_table_out_ptr
+ * @in_num_entries_ptr
+ * @out_num_entries_ptr
+ * @table_data_size_ptr
+ *
+ * This function creates the input and output DMA tables for
+ * symmetric operations (AES/DES) according to the block
+ * size from LLI arays
+ * Note that all bus addresses that are passed to the SEP
+ * are in 32 bit format; the SEP is a 32 bit device
+ */
+static int sep_construct_dma_tables_from_lli(
+ struct sep_device *sep,
+ struct sep_lli_entry *lli_in_array,
+ u32 sep_in_lli_entries,
+ struct sep_lli_entry *lli_out_array,
+ u32 sep_out_lli_entries,
+ u32 block_size,
+ dma_addr_t *lli_table_in_ptr,
+ dma_addr_t *lli_table_out_ptr,
+ u32 *in_num_entries_ptr,
+ u32 *out_num_entries_ptr,
+ u32 *table_data_size_ptr)
+{
+ /* Points to the area where next lli table can be allocated */
+ void *lli_table_alloc_addr = 0;
+ /* Input lli table */
+ struct sep_lli_entry *in_lli_table_ptr = NULL;
+ /* Output lli table */
+ struct sep_lli_entry *out_lli_table_ptr = NULL;
+ /* Pointer to the info entry of the table - the last entry */
+ struct sep_lli_entry *info_in_entry_ptr = NULL;
+ /* Pointer to the info entry of the table - the last entry */
+ struct sep_lli_entry *info_out_entry_ptr = NULL;
+ /* Points to the first entry to be processed in the lli_in_array */
+ u32 current_in_entry = 0;
+ /* Points to the first entry to be processed in the lli_out_array */
+ u32 current_out_entry = 0;
+ /* Max size of the input table */
+ u32 in_table_data_size = 0;
+ /* Max size of the output table */
+ u32 out_table_data_size = 0;
+ /* Flag te signifies if this is the last tables build */
+ u32 last_table_flag = 0;
+ /* The data size that should be in table */
+ u32 table_data_size = 0;
+ /* Number of etnries in the input table */
+ u32 num_entries_in_table = 0;
+ /* Number of etnries in the output table */
+ u32 num_entries_out_table = 0;
+
+ /* Initiate to point after the message area */
+ lli_table_alloc_addr = (void *)(sep->shared_addr +
+ SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
+ (sep->num_lli_tables_created *
+ (sizeof(struct sep_lli_entry) *
+ SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP)));
+
+ /* Loop till all the entries in in array are not processed */
+ while (current_in_entry < sep_in_lli_entries) {
+ /* Set the new input and output tables */
+ in_lli_table_ptr =
+ (struct sep_lli_entry *)lli_table_alloc_addr;
+
+ lli_table_alloc_addr += sizeof(struct sep_lli_entry) *
+ SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP;
+
+ /* Set the first output tables */
+ out_lli_table_ptr =
+ (struct sep_lli_entry *)lli_table_alloc_addr;
+
+ /* Check if the DMA table area limit was overrun */
+ if ((lli_table_alloc_addr + sizeof(struct sep_lli_entry) *
+ SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP) >
+ ((void *)sep->shared_addr +
+ SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
+ SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES)) {
+
+ dev_warn(&sep->pdev->dev, "dma table limit overrun\n");
+ return -ENOMEM;
+ }
+
+ /* Update the number of the lli tables created */
+ sep->num_lli_tables_created += 2;
+
+ lli_table_alloc_addr += sizeof(struct sep_lli_entry) *
+ SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP;
+
+ /* Calculate the maximum size of data for input table */
+ in_table_data_size =
+ sep_calculate_lli_table_max_size(sep,
+ &lli_in_array[current_in_entry],
+ (sep_in_lli_entries - current_in_entry),
+ &last_table_flag);
+
+ /* Calculate the maximum size of data for output table */
+ out_table_data_size =
+ sep_calculate_lli_table_max_size(sep,
+ &lli_out_array[current_out_entry],
+ (sep_out_lli_entries - current_out_entry),
+ &last_table_flag);
+
+ dev_dbg(&sep->pdev->dev,
+ "construct tables from lli in_table_data_size is %x\n",
+ in_table_data_size);
+
+ dev_dbg(&sep->pdev->dev,
+ "construct tables from lli out_table_data_size is %x\n",
+ out_table_data_size);
+
+ table_data_size = in_table_data_size;
+
+ if (!last_table_flag) {
+ /*
+ * If this is not the last table,
+ * then must check where the data is smallest
+ * and then align it to the block size
+ */
+ if (table_data_size > out_table_data_size)
+ table_data_size = out_table_data_size;
+
+ /*
+ * Now calculate the table size so that
+ * it will be module block size
+ */
+ table_data_size = (table_data_size / block_size) *
+ block_size;
+ }
+
+ /* Construct input lli table */
+ sep_build_lli_table(sep, &lli_in_array[current_in_entry],
+ in_lli_table_ptr,
+ ¤t_in_entry,
+ &num_entries_in_table,
+ table_data_size);
+
+ /* Construct output lli table */
+ sep_build_lli_table(sep, &lli_out_array[current_out_entry],
+ out_lli_table_ptr,
+ ¤t_out_entry,
+ &num_entries_out_table,
+ table_data_size);
+
+ /* If info entry is null - this is the first table built */
+ if (info_in_entry_ptr == NULL) {
+ /* Set the output parameters to physical addresses */
+ *lli_table_in_ptr =
+ sep_shared_area_virt_to_bus(sep, in_lli_table_ptr);
+
+ *in_num_entries_ptr = num_entries_in_table;
+
+ *lli_table_out_ptr =
+ sep_shared_area_virt_to_bus(sep,
+ out_lli_table_ptr);
+
+ *out_num_entries_ptr = num_entries_out_table;
+ *table_data_size_ptr = table_data_size;
+
+ dev_dbg(&sep->pdev->dev,
+ "output lli_table_in_ptr is %08lx\n",
+ (unsigned long)*lli_table_in_ptr);
+ dev_dbg(&sep->pdev->dev,
+ "output lli_table_out_ptr is %08lx\n",
+ (unsigned long)*lli_table_out_ptr);
+ } else {
+ /* Update the info entry of the previous in table */
+ info_in_entry_ptr->bus_address =
+ sep_shared_area_virt_to_bus(sep,
+ in_lli_table_ptr);
+
+ info_in_entry_ptr->block_size =
+ ((num_entries_in_table) << 24) |
+ (table_data_size);
+
+ /* Update the info entry of the previous in table */
+ info_out_entry_ptr->bus_address =
+ sep_shared_area_virt_to_bus(sep,
+ out_lli_table_ptr);
+
+ info_out_entry_ptr->block_size =
+ ((num_entries_out_table) << 24) |
+ (table_data_size);
+
+ dev_dbg(&sep->pdev->dev,
+ "output lli_table_in_ptr:%08lx %08x\n",
+ (unsigned long)info_in_entry_ptr->bus_address,
+ info_in_entry_ptr->block_size);
+
+ dev_dbg(&sep->pdev->dev,
+ "output lli_table_out_ptr:%08lx %08x\n",
+ (unsigned long)info_out_entry_ptr->bus_address,
+ info_out_entry_ptr->block_size);
+ }
+
+ /* Save the pointer to the info entry of the current tables */
+ info_in_entry_ptr = in_lli_table_ptr +
+ num_entries_in_table - 1;
+ info_out_entry_ptr = out_lli_table_ptr +
+ num_entries_out_table - 1;
+
+ dev_dbg(&sep->pdev->dev,
+ "output num_entries_out_table is %x\n",
+ (u32)num_entries_out_table);
+ dev_dbg(&sep->pdev->dev,
+ "output info_in_entry_ptr is %lx\n",
+ (unsigned long)info_in_entry_ptr);
+ dev_dbg(&sep->pdev->dev,
+ "output info_out_entry_ptr is %lx\n",
+ (unsigned long)info_out_entry_ptr);
+ }
+
+ /* Print input tables */
+ sep_debug_print_lli_tables(sep,
+ (struct sep_lli_entry *)
+ sep_shared_area_bus_to_virt(sep, *lli_table_in_ptr),
+ *in_num_entries_ptr,
+ *table_data_size_ptr);
+
+ /* Print output tables */
+ sep_debug_print_lli_tables(sep,
+ (struct sep_lli_entry *)
+ sep_shared_area_bus_to_virt(sep, *lli_table_out_ptr),
+ *out_num_entries_ptr,
+ *table_data_size_ptr);
+
+ return 0;
+}
+
+/**
+ * sep_prepare_input_output_dma_table - prepare DMA I/O table
+ * @app_virt_in_addr:
+ * @app_virt_out_addr:
+ * @data_size:
+ * @block_size:
+ * @lli_table_in_ptr:
+ * @lli_table_out_ptr:
+ * @in_num_entries_ptr:
+ * @out_num_entries_ptr:
+ * @table_data_size_ptr:
+ * @is_kva: set for kernel data; used only for kernel crypto module
+ *
+ * This function builds input and output DMA tables for synhronic
+ * symmetric operations (AES, DES, HASH). It also checks that each table
+ * is of the modular block size
+ * Note that all bus addresses that are passed to the SEP
+ * are in 32 bit format; the SEP is a 32 bit device
+ */
+static int sep_prepare_input_output_dma_table(struct sep_device *sep,
+ unsigned long app_virt_in_addr,
+ unsigned long app_virt_out_addr,
+ u32 data_size,
+ u32 block_size,
+ dma_addr_t *lli_table_in_ptr,
+ dma_addr_t *lli_table_out_ptr,
+ u32 *in_num_entries_ptr,
+ u32 *out_num_entries_ptr,
+ u32 *table_data_size_ptr,
+ bool is_kva)
+
+{
+ int error = 0;
+ /* Array of pointers of page */
+ struct sep_lli_entry *lli_in_array;
+ /* Array of pointers of page */
+ struct sep_lli_entry *lli_out_array;
+
+ if (data_size == 0) {
+ /* Prepare empty table for input and output */
+ sep_prepare_empty_lli_table(sep, lli_table_in_ptr,
+ in_num_entries_ptr, table_data_size_ptr);
+
+ sep_prepare_empty_lli_table(sep, lli_table_out_ptr,
+ out_num_entries_ptr, table_data_size_ptr);
+
+ goto update_dcb_counter;
+ }
+
+ /* Initialize the pages pointers */
+ sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = NULL;
+ sep->dma_res_arr[sep->nr_dcb_creat].out_page_array = NULL;
+
+ /* Lock the pages of the buffer and translate them to pages */
+ if (is_kva == true) {
+ error = sep_lock_kernel_pages(sep, app_virt_in_addr,
+ data_size, &lli_in_array, SEP_DRIVER_IN_FLAG);
+
+ if (error) {
+ dev_warn(&sep->pdev->dev,
+ "lock kernel for in failed\n");
+ goto end_function;
+ }
+
+ error = sep_lock_kernel_pages(sep, app_virt_out_addr,
+ data_size, &lli_out_array, SEP_DRIVER_OUT_FLAG);
+
+ if (error) {
+ dev_warn(&sep->pdev->dev,
+ "lock kernel for out failed\n");
+ goto end_function;
+ }
+ }
+
+ else {
+ error = sep_lock_user_pages(sep, app_virt_in_addr,
+ data_size, &lli_in_array, SEP_DRIVER_IN_FLAG);
+ if (error) {
+ dev_warn(&sep->pdev->dev,
+ "sep_lock_user_pages for input virtual buffer failed\n");
+ goto end_function;
+ }
+
+ error = sep_lock_user_pages(sep, app_virt_out_addr,
+ data_size, &lli_out_array, SEP_DRIVER_OUT_FLAG);
+
+ if (error) {
+ dev_warn(&sep->pdev->dev,
+ "sep_lock_user_pages for output virtual buffer failed\n");
+ goto end_function_free_lli_in;
+ }
+ }
+
+ dev_dbg(&sep->pdev->dev, "prep input output dma table sep_in_num_pages is %x\n",
+ sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages);
+ dev_dbg(&sep->pdev->dev, "sep_out_num_pages is %x\n",
+ sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages);
+ dev_dbg(&sep->pdev->dev, "SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP is %x\n",
+ SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP);
+
+ /* Call the fucntion that creates table from the lli arrays */
+ error = sep_construct_dma_tables_from_lli(sep, lli_in_array,
+ sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages,
+ lli_out_array,
+ sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages,
+ block_size, lli_table_in_ptr, lli_table_out_ptr,
+ in_num_entries_ptr, out_num_entries_ptr, table_data_size_ptr);
+
+ if (error) {
+ dev_warn(&sep->pdev->dev,
+ "sep_construct_dma_tables_from_lli failed\n");
+ goto end_function_with_error;
+ }
+
+ kfree(lli_out_array);
+ kfree(lli_in_array);
+
+update_dcb_counter:
+ /* Update DCB counter */
+ sep->nr_dcb_creat++;
+
+ goto end_function;
+
+end_function_with_error:
+ kfree(sep->dma_res_arr[sep->nr_dcb_creat].out_map_array);
+ kfree(sep->dma_res_arr[sep->nr_dcb_creat].out_page_array);
+ kfree(lli_out_array);
+
+
+end_function_free_lli_in:
+ kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_map_array);
+ kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_page_array);
+ kfree(lli_in_array);
+
+end_function:
+
+ return error;
+
+}
+
+/**
+ * sep_prepare_input_output_dma_table_in_dcb - prepare control blocks
+ * @app_in_address: unsigned long; for data buffer in (user space)
+ * @app_out_address: unsigned long; for data buffer out (user space)
+ * @data_in_size: u32; for size of data
+ * @block_size: u32; for block size
+ * @tail_block_size: u32; for size of tail block
+ * @isapplet: bool; to indicate external app
+ * @is_kva: bool; kernel buffer; only used for kernel crypto module
+ *
+ * This function prepares the linked DMA tables and puts the
+ * address for the linked list of tables inta a DCB (data control
+ * block) the address of which is known by the SEP hardware
+ * Note that all bus addresses that are passed to the SEP
+ * are in 32 bit format; the SEP is a 32 bit device
+ */
+static int sep_prepare_input_output_dma_table_in_dcb(struct sep_device *sep,
+ unsigned long app_in_address,
+ unsigned long app_out_address,
+ u32 data_in_size,
+ u32 block_size,
+ u32 tail_block_size,
+ bool isapplet,
+ bool is_kva)
+{
+ int error = 0;
+ /* Size of tail */
+ u32 tail_size = 0;
+ /* Address of the created DCB table */
+ struct sep_dcblock *dcb_table_ptr = NULL;
+ /* The physical address of the first input DMA table */
+ dma_addr_t in_first_mlli_address = 0;
+ /* Number of entries in the first input DMA table */
+ u32 in_first_num_entries = 0;
+ /* The physical address of the first output DMA table */
+ dma_addr_t out_first_mlli_address = 0;
+ /* Number of entries in the first output DMA table */
+ u32 out_first_num_entries = 0;
+ /* Data in the first input/output table */
+ u32 first_data_size = 0;
+
+ if (sep->nr_dcb_creat == SEP_MAX_NUM_SYNC_DMA_OPS) {
+ /* No more DCBs to allocate */
+ dev_warn(&sep->pdev->dev, "no more DCBs available\n");
+ error = -ENOSPC;
+ goto end_function;
+ }
+
+ /* Allocate new DCB */
+ dcb_table_ptr = (struct sep_dcblock *)(sep->shared_addr +
+ SEP_DRIVER_SYSTEM_DCB_MEMORY_OFFSET_IN_BYTES +
+ (sep->nr_dcb_creat * sizeof(struct sep_dcblock)));
+
+ /* Set the default values in the DCB */
+ dcb_table_ptr->input_mlli_address = 0;
+ dcb_table_ptr->input_mlli_num_entries = 0;
+ dcb_table_ptr->input_mlli_data_size = 0;
+ dcb_table_ptr->output_mlli_address = 0;
+ dcb_table_ptr->output_mlli_num_entries = 0;
+ dcb_table_ptr->output_mlli_data_size = 0;
+ dcb_table_ptr->tail_data_size = 0;
+ dcb_table_ptr->out_vr_tail_pt = 0;
+
+ if (isapplet == true) {
+
+ /* Check if there is enough data for DMA operation */
+ if (data_in_size < SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE) {
+ if (is_kva == true) {
+ memcpy(dcb_table_ptr->tail_data,
+ (void *)app_in_address, data_in_size);
+ } else {
+ if (copy_from_user(dcb_table_ptr->tail_data,
+ (void __user *)app_in_address,
+ data_in_size)) {
+ error = -EFAULT;
+ goto end_function;
+ }
+ }
+
+ dcb_table_ptr->tail_data_size = data_in_size;
+
+ /* Set the output user-space address for mem2mem op */
+ if (app_out_address)
+ dcb_table_ptr->out_vr_tail_pt =
+ (aligned_u64)app_out_address;
+
+ /*
+ * Update both data length parameters in order to avoid
+ * second data copy and allow building of empty mlli
+ * tables
+ */
+ tail_size = 0x0;
+ data_in_size = 0x0;
+
+ } else {
+ if (!app_out_address) {
+ tail_size = data_in_size % block_size;
+ if (!tail_size) {
+ if (tail_block_size == block_size)
+ tail_size = block_size;
+ }
+ } else {
+ tail_size = 0;
+ }
+ }
+ if (tail_size) {
+ if (is_kva == true) {
+ memcpy(dcb_table_ptr->tail_data,
+ (void *)(app_in_address + data_in_size -
+ tail_size), tail_size);
+ } else {
+ /* We have tail data - copy it to DCB */
+ if (copy_from_user(dcb_table_ptr->tail_data,
+ (void *)(app_in_address +
+ data_in_size - tail_size), tail_size)) {
+ error = -EFAULT;
+ goto end_function;
+ }
+ }
+ if (app_out_address)
+ /*
+ * Calculate the output address
+ * according to tail data size
+ */
+ dcb_table_ptr->out_vr_tail_pt =
+ (aligned_u64)app_out_address + data_in_size
+ - tail_size;
+
+ /* Save the real tail data size */
+ dcb_table_ptr->tail_data_size = tail_size;
+ /*
+ * Update the data size without the tail
+ * data size AKA data for the dma
+ */
+ data_in_size = (data_in_size - tail_size);
+ }
+ }
+ /* Check if we need to build only input table or input/output */
+ if (app_out_address) {
+ /* Prepare input/output tables */
+ error = sep_prepare_input_output_dma_table(sep,
+ app_in_address,
+ app_out_address,
+ data_in_size,
+ block_size,
+ &in_first_mlli_address,
+ &out_first_mlli_address,
+ &in_first_num_entries,
+ &out_first_num_entries,
+ &first_data_size,
+ is_kva);
+ } else {
+ /* Prepare input tables */
+ error = sep_prepare_input_dma_table(sep,
+ app_in_address,
+ data_in_size,
+ block_size,
+ &in_first_mlli_address,
+ &in_first_num_entries,
+ &first_data_size,
+ is_kva);
+ }
+
+ if (error) {
+ dev_warn(&sep->pdev->dev, "prepare DMA table call failed from prepare DCB call\n");
+ goto end_function;
+ }
+
+ /* Set the DCB values */
+ dcb_table_ptr->input_mlli_address = in_first_mlli_address;
+ dcb_table_ptr->input_mlli_num_entries = in_first_num_entries;
+ dcb_table_ptr->input_mlli_data_size = first_data_size;
+ dcb_table_ptr->output_mlli_address = out_first_mlli_address;
+ dcb_table_ptr->output_mlli_num_entries = out_first_num_entries;
+ dcb_table_ptr->output_mlli_data_size = first_data_size;
+
+end_function:
+ return error;
+
+}
+
+
+/**
+ * sep_create_sync_dma_tables_handler - create sync DMA tables
+ * @sep: pointer to struct sep_device
+ * @arg: pointer to struct bld_syn_tab_struct
+ *
+ * Handle the request for creation of the DMA tables for the synchronic
+ * symmetric operations (AES,DES). Note that all bus addresses that are
+ * passed to the SEP are in 32 bit format; the SEP is a 32 bit device
+ */
+static int sep_create_sync_dma_tables_handler(struct sep_device *sep,
+ unsigned long arg)
+{
+ int error = 0;
+
+ /* Command arguments */
+ struct bld_syn_tab_struct command_args;
+
+ if (copy_from_user(&command_args, (void __user *)arg,
+ sizeof(struct bld_syn_tab_struct))) {
+ error = -EFAULT;
+ goto end_function;
+ }
+
+ dev_dbg(&sep->pdev->dev, "create dma table handler app_in_address is %08llx\n",
+ command_args.app_in_address);
+ dev_dbg(&sep->pdev->dev, "app_out_address is %08llx\n",
+ command_args.app_out_address);
+ dev_dbg(&sep->pdev->dev, "data_size is %u\n",
+ command_args.data_in_size);
+ dev_dbg(&sep->pdev->dev, "block_size is %u\n",
+ command_args.block_size);
+
+ /* Validate user parameters */
+ if (!command_args.app_in_address) {
+ error = -EINVAL;
+ goto end_function;
+ }
+
+ error = sep_prepare_input_output_dma_table_in_dcb(sep,
+ (unsigned long)command_args.app_in_address,
+ (unsigned long)command_args.app_out_address,
+ command_args.data_in_size,
+ command_args.block_size,
+ 0x0,
+ false,
+ false);
+
+end_function:
+ return error;
+}
+
+/**
+ * sep_free_dma_tables_and_dcb - free DMA tables and DCBs
+ * @sep: pointer to struct sep_device
+ * @isapplet: indicates external application (used for kernel access)
+ * @is_kva: indicates kernel addresses (only used for kernel crypto)
+ *
+ * This function frees the DMA tables and DCB
+ */
+static int sep_free_dma_tables_and_dcb(struct sep_device *sep, bool isapplet,
+ bool is_kva)
+{
+ int i = 0;
+ int error = 0;
+ int error_temp = 0;
+ struct sep_dcblock *dcb_table_ptr;
+ unsigned long pt_hold;
+ void *tail_pt;
+
+ if (isapplet == true) {
+ /* Set pointer to first DCB table */
+ dcb_table_ptr = (struct sep_dcblock *)
+ (sep->shared_addr +
+ SEP_DRIVER_SYSTEM_DCB_MEMORY_OFFSET_IN_BYTES);
+
+ /* Go over each DCB and see if tail pointer must be updated */
+ for (i = 0; i < sep->nr_dcb_creat; i++, dcb_table_ptr++) {
+ if (dcb_table_ptr->out_vr_tail_pt) {
+ pt_hold = (unsigned long)dcb_table_ptr->out_vr_tail_pt;
+ tail_pt = (void *)pt_hold;
+ if (is_kva == true) {
+ memcpy(tail_pt,
+ dcb_table_ptr->tail_data,
+ dcb_table_ptr->tail_data_size);
+ } else {
+ error_temp = copy_to_user(
+ tail_pt,
+ dcb_table_ptr->tail_data,
+ dcb_table_ptr->tail_data_size);
+ }
+ if (error_temp) {
+ /* Release the DMA resource */
+ error = -EFAULT;
+ break;
+ }
+ }
+ }
+ }
+ /* Free the output pages, if any */
+ sep_free_dma_table_data_handler(sep);
+
+ return error;
+}
+
+/**
+ * sep_get_static_pool_addr_handler - get static pool address
+ * @sep: pointer to struct sep_device
+ *
+ * This function sets the bus and virtual addresses of the static pool
+ */
+static int sep_get_static_pool_addr_handler(struct sep_device *sep)
+{
+ u32 *static_pool_addr = NULL;
+
+ static_pool_addr = (u32 *)(sep->shared_addr +
+ SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES);
+
+ static_pool_addr[0] = SEP_STATIC_POOL_VAL_TOKEN;
+ static_pool_addr[1] = (u32)sep->shared_bus +
+ SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES;
+
+ dev_dbg(&sep->pdev->dev, "static pool segment: physical %x\n",
+ (u32)static_pool_addr[1]);
+
+ return 0;
+}
+
+/**
+ * sep_start_handler - start device
+ * @sep: pointer to struct sep_device
+ */
+static int sep_start_handler(struct sep_device *sep)
+{
+ unsigned long reg_val;
+ unsigned long error = 0;
+
+ /* Wait in polling for message from SEP */
+ do {
+ reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
+ } while (!reg_val);
+
+ /* Check the value */
+ if (reg_val == 0x1)
+ /* Fatal error - read error status from GPRO */
+ error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
+ return error;
+}
+
+/**
+ * ep_check_sum_calc - checksum messages
+ * @data: buffer to checksum
+ * @length: buffer size
+ *
+ * This function performs a checksum for messages that are sent
+ * to the SEP.
+ */
+static u32 sep_check_sum_calc(u8 *data, u32 length)
+{
+ u32 sum = 0;
+ u16 *Tdata = (u16 *)data;
+
+ while (length > 1) {
+ /* This is the inner loop */
+ sum += *Tdata++;
+ length -= 2;
+ }
+
+ /* Add left-over byte, if any */
+ if (length > 0)
+ sum += *(u8 *)Tdata;
+
+ /* Fold 32-bit sum to 16 bits */
+ while (sum>>16)
+ sum = (sum & 0xffff) + (sum >> 16);
+
+ return ~sum & 0xFFFF;
+}
+
+/**
+ * sep_init_handler -
+ * @sep: pointer to struct sep_device
+ * @arg: parameters from user space application
+ *
+ * Handles the request for SEP initialization
+ * Note that this will go away for Medfield once the SCU
+ * SEP initialization is complete
+ * Also note that the message to the SEP has components
+ * from user space as well as components written by the driver
+ * This is becuase the portions of the message that pertain to
+ * physical addresses must be set by the driver after the message
+ * leaves custody of the user space application for security
+ * reasons.
+ */
+static int sep_init_handler(struct sep_device *sep, unsigned long arg)
+{
+ u32 message_buff[14];
+ u32 counter;
+ int error = 0;
+ u32 reg_val;
+ dma_addr_t new_base_addr;
+ unsigned long addr_hold;
+ struct init_struct command_args;
+
+ /* Make sure that we have not initialized already */
+ reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
+
+ if (reg_val != 0x2) {
+ error = SEP_ALREADY_INITIALIZED_ERR;
+ dev_dbg(&sep->pdev->dev, "init; device already initialized\n");
+ goto end_function;
+ }
+
+ /* Only root can initialize */
+ if (!capable(CAP_SYS_ADMIN)) {
+ error = -EACCES;
+ goto end_function;
+ }
+
+ /* Copy in the parameters */
+ error = copy_from_user(&command_args, (void __user *)arg,
+ sizeof(struct init_struct));
+
+ if (error) {
+ error = -EFAULT;
+ goto end_function;
+ }
+
+ /* Validate parameters */
+ if (!command_args.message_addr || !command_args.sep_sram_addr ||
+ command_args.message_size_in_words > 14) {
+ error = -EINVAL;
+ goto end_function;
+ }
+
+ /* Copy in the SEP init message */
+ addr_hold = (unsigned long)command_args.message_addr;
+ error = copy_from_user(message_buff,
+ (void __user *)addr_hold,
+ command_args.message_size_in_words*sizeof(u32));
+
+ if (error) {
+ error = -EFAULT;
+ goto end_function;
+ }
+
+ /* Load resident, cache, and extapp firmware */
+ error = sep_load_firmware(sep);
+
+ if (error) {
+ dev_warn(&sep->pdev->dev,
+ "init; copy SEP init message failed %x\n", error);
+ goto end_function;
+ }
+
+ /* Compute the base address */
+ new_base_addr = sep->shared_bus;
+
+ if (sep->resident_bus < new_base_addr)
+ new_base_addr = sep->resident_bus;
+
+ if (sep->cache_bus < new_base_addr)
+ new_base_addr = sep->cache_bus;
+
+ if (sep->dcache_bus < new_base_addr)
+ new_base_addr = sep->dcache_bus;
+
+ /* Put physical addresses in SEP message */
+ message_buff[3] = (u32)new_base_addr;
+ message_buff[4] = (u32)sep->shared_bus;
+ message_buff[6] = (u32)sep->resident_bus;
+ message_buff[7] = (u32)sep->cache_bus;
+ message_buff[8] = (u32)sep->dcache_bus;
+
+ message_buff[command_args.message_size_in_words - 1] = 0x0;
+ message_buff[command_args.message_size_in_words - 1] =
+ sep_check_sum_calc((u8 *)message_buff,
+ command_args.message_size_in_words*sizeof(u32));
+
+ /* Debug print of message */
+ for (counter = 0; counter < command_args.message_size_in_words;
+ counter++)
+ dev_dbg(&sep->pdev->dev, "init; SEP message word %d is %x\n",
+ counter, message_buff[counter]);
+
+ /* Tell the SEP the sram address */
+ sep_write_reg(sep, HW_SRAM_ADDR_REG_ADDR, command_args.sep_sram_addr);
+
+ /* Push the message to the SEP */
+ for (counter = 0; counter < command_args.message_size_in_words;
+ counter++) {
+ sep_write_reg(sep, HW_SRAM_DATA_REG_ADDR,
+ message_buff[counter]);
+ sep_wait_sram_write(sep);
+ }
+
+ /* Signal SEP that message is ready and to init */
+ sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x1);
+
+ /* Wait for acknowledge */
+
+ do {
+ reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
+ } while (!(reg_val & 0xFFFFFFFD));
+
+ if (reg_val == 0x1) {
+ dev_warn(&sep->pdev->dev, "init; device int failed\n");
+ error = sep_read_reg(sep, 0x8060);
+ dev_warn(&sep->pdev->dev, "init; sw monitor is %x\n", error);
+ error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
+ dev_warn(&sep->pdev->dev, "init; error is %x\n", error);
+ goto end_function;
+ }
+ /* Signal SEP to zero the GPR3 */
+ sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x10);
+
+ /* Wait for response */
+
+ do {
+ reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
+ } while (reg_val != 0);
+
+end_function:
+ return error;
+}
+
+/**
+ * sep_end_transaction_handler - end transaction
+ * @sep: pointer to struct sep_device
+ *
+ * This API handles the end transaction request
+ */
+static int sep_end_transaction_handler(struct sep_device *sep)
+{
+ /* Clear the data pool pointers Token */
+ memset((void *)(sep->shared_addr +
+ SEP_DRIVER_DATA_POOL_ALLOCATION_OFFSET_IN_BYTES),
+ 0, sep->num_of_data_allocations*2*sizeof(u32));
+
+ /* Check that all the DMA resources were freed */
+ sep_free_dma_table_data_handler(sep);
+
+ clear_bit(SEP_MMAP_LOCK_BIT, &sep->in_use_flags);
+
+ /*
+ * We are now through with the transaction. Let's
+ * allow other processes who have the device open
+ * to perform transactions
+ */
+ mutex_lock(&sep->sep_mutex);
+ sep->pid_doing_transaction = 0;
+ mutex_unlock(&sep->sep_mutex);
+ /* Raise event for stuck contextes */
+ wake_up(&sep->event);
+
+ return 0;
+}
+
+/**
+ * sep_prepare_dcb_handler - prepare a control block
+ * @sep: pointer to struct sep_device
+ * @arg: pointer to user parameters
+ *
+ * This function will retrieve the RAR buffer physical addresses, type
+ * & size corresponding to the RAR handles provided in the buffers vector.
+ */
+static int sep_prepare_dcb_handler(struct sep_device *sep, unsigned long arg)
+{
+ int error;
+ /* Command arguments */
+ struct build_dcb_struct command_args;
+
+ /* Get the command arguments */
+ if (copy_from_user(&command_args, (void __user *)arg,
+ sizeof(struct build_dcb_struct))) {
+ error = -EFAULT;
+ goto end_function;
+ }
+
+ dev_dbg(&sep->pdev->dev, "prep dcb handler app_in_address is %08llx\n",
+ command_args.app_in_address);
+ dev_dbg(&sep->pdev->dev, "app_out_address is %08llx\n",
+ command_args.app_out_address);
+ dev_dbg(&sep->pdev->dev, "data_size is %x\n",
+ command_args.data_in_size);
+ dev_dbg(&sep->pdev->dev, "block_size is %x\n",
+ command_args.block_size);
+ dev_dbg(&sep->pdev->dev, "tail block_size is %x\n",
+ command_args.tail_block_size);
+
+ error = sep_prepare_input_output_dma_table_in_dcb(sep,
+ (unsigned long)command_args.app_in_address,
+ (unsigned long)command_args.app_out_address,
+ command_args.data_in_size, command_args.block_size,
+ command_args.tail_block_size, true, false);
+
+end_function:
+ return error;
+
+}
+
+/**
+ * sep_free_dcb_handler - free control block resources
+ * @sep: pointer to struct sep_device
+ *
+ * This function frees the DCB resources and updates the needed
+ * user-space buffers.
+ */
+static int sep_free_dcb_handler(struct sep_device *sep)
+{
+ return sep_free_dma_tables_and_dcb(sep, false, false);
+}
+
+/**
+ * sep_rar_prepare_output_msg_handler - prepare an output message
+ * @sep: pointer to struct sep_device
+ * @arg: pointer to user parameters
+ *
+ * This function will retrieve the RAR buffer physical addresses, type
+ * & size corresponding to the RAR handles provided in the buffers vector.
+ */
+static int sep_rar_prepare_output_msg_handler(struct sep_device *sep,
+ unsigned long arg)
+{
+ int error = 0;
+ /* Command args */
+ struct rar_hndl_to_bus_struct command_args;
+ struct RAR_buffer rar_buf;
+ /* Bus address */
+ dma_addr_t rar_bus = 0;
+ /* Holds the RAR address in the system memory offset */
+ u32 *rar_addr;
+
+ /* Copy the data */
+ if (copy_from_user(&command_args, (void __user *)arg,
+ sizeof(command_args))) {
+ error = -EFAULT;
+ goto end_function;
+ }
+
+ /* Call to translation function only if user handle is not NULL */
+ if (command_args.rar_handle) {
+ memset(&rar_buf, 0, sizeof(rar_buf));
+ rar_buf.info.handle = (u32)command_args.rar_handle;
+
+ if (rar_handle_to_bus(&rar_buf, 1) != 1) {
+ error = -EFAULT;
+ goto end_function;
+ }
+ rar_bus = rar_buf.bus_address;
+ }
+ dev_dbg(&sep->pdev->dev, "rar msg; rar_addr_bus = %x\n", (u32)rar_bus);
+
+ /* Set value in the SYSTEM MEMORY offset */
+ rar_addr = (u32 *)(sep->shared_addr +
+ SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES);
+
+ /* Copy the physical address to the System Area for the SEP */
+ rar_addr[0] = SEP_RAR_VAL_TOKEN;
+ rar_addr[1] = rar_bus;
+
+end_function:
+ return error;
+}
+
+/**
+ * sep_realloc_ext_cache_handler - report location of extcache
+ * @sep: pointer to struct sep_device
+ * @arg: pointer to user parameters
+ *
+ * This function tells the SEP where the extapp is located
+ */
+static int sep_realloc_ext_cache_handler(struct sep_device *sep,
+ unsigned long arg)
+{
+ /* Holds the new ext cache address in the system memory offset */
+ u32 *system_addr;
+
+ /* Set value in the SYSTEM MEMORY offset */
+ system_addr = (u32 *)(sep->shared_addr +
+ SEP_DRIVER_SYSTEM_EXT_CACHE_ADDR_OFFSET_IN_BYTES);
+
+ /* Copy the physical address to the System Area for the SEP */
+ system_addr[0] = SEP_EXT_CACHE_ADDR_VAL_TOKEN;
+ system_addr[1] = sep->extapp_bus;
+
+ return 0;
+}
+
+/**
+ * sep_ioctl - ioctl api
+ * @filp: pointer to struct file
+ * @cmd: command
+ * @arg: pointer to argument structure
+ *
+ * Implement the ioctl methods availble on the SEP device.
+ */
+static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+ int error = 0;
+ struct sep_device *sep = filp->private_data;
+
+ /* Make sure we own this device */
+ mutex_lock(&sep->sep_mutex);
+ if ((current->pid != sep->pid_doing_transaction) &&
+ (sep->pid_doing_transaction != 0)) {
+ dev_dbg(&sep->pdev->dev, "ioctl pid is not owner\n");
+ error = -EACCES;
+ goto end_function;
+ }
+
+ mutex_unlock(&sep->sep_mutex);
+
+ if (_IOC_TYPE(cmd) != SEP_IOC_MAGIC_NUMBER)
+ return -ENOTTY;
+
+ /* Lock to prevent the daemon to interfere with operation */
+ mutex_lock(&sep->ioctl_mutex);
+
+ switch (cmd) {
+ case SEP_IOCSENDSEPCOMMAND:
+ /* Send command to SEP */
+ error = sep_send_command_handler(sep);
+ break;
+ case SEP_IOCALLOCDATAPOLL:
+ /* Allocate data pool */
+ error = sep_allocate_data_pool_memory_handler(sep, arg);
+ break;
+ case SEP_IOCCREATESYMDMATABLE:
+ /* Create DMA table for synhronic operation */
+ error = sep_create_sync_dma_tables_handler(sep, arg);
+ break;
+ case SEP_IOCFREEDMATABLEDATA:
+ /* Free the pages */
+ error = sep_free_dma_table_data_handler(sep);
+ break;
+ case SEP_IOCSEPSTART:
+ /* Start command to SEP */
+ if (sep->pdev->revision == 0) /* Only for old chip */
+ error = sep_start_handler(sep);
+ else
+ error = -EPERM; /* Not permitted on new chip */
+ break;
+ case SEP_IOCSEPINIT:
+ /* Init command to SEP */
+ if (sep->pdev->revision == 0) /* Only for old chip */
+ error = sep_init_handler(sep, arg);
+ else
+ error = -EPERM; /* Not permitted on new chip */
+ break;
+ case SEP_IOCGETSTATICPOOLADDR:
+ /* Inform the SEP the bus address of the static pool */
+ error = sep_get_static_pool_addr_handler(sep);
+ break;
+ case SEP_IOCENDTRANSACTION:
+ error = sep_end_transaction_handler(sep);
+ break;
+ case SEP_IOCREALLOCEXTCACHE:
+ if (sep->pdev->revision == 0) /* Only for old chip */
+ error = sep_realloc_ext_cache_handler(sep, arg);
+ else
+ error = -EPERM; /* Not permitted on new chip */
+ break;
+ case SEP_IOCRARPREPAREMESSAGE:
+ error = sep_rar_prepare_output_msg_handler(sep, arg);
+ break;
+ case SEP_IOCPREPAREDCB:
+ error = sep_prepare_dcb_handler(sep, arg);
+ break;
+ case SEP_IOCFREEDCB:
+ error = sep_free_dcb_handler(sep);
+ break;
+ default:
+ error = -ENOTTY;
+ break;
+ }
+
+end_function:
+ mutex_unlock(&sep->ioctl_mutex);
+ return error;
+}
+
+/**
+ * sep_singleton_ioctl - ioctl api for singleton interface
+ * @filp: pointer to struct file
+ * @cmd: command
+ * @arg: pointer to argument structure
+ *
+ * Implement the additional ioctls for the singleton device
+ */
+static long sep_singleton_ioctl(struct file *filp, u32 cmd, unsigned long arg)
+{
+ long error = 0;
+ struct sep_device *sep = filp->private_data;
+
+ /* Check that the command is for the SEP device */
+ if (_IOC_TYPE(cmd) != SEP_IOC_MAGIC_NUMBER)
+ return -ENOTTY;
+
+ /* Make sure we own this device */
+ mutex_lock(&sep->sep_mutex);
+ if ((current->pid != sep->pid_doing_transaction) &&
+ (sep->pid_doing_transaction != 0)) {
+ dev_dbg(&sep->pdev->dev, "singleton ioctl pid is not owner\n");
+ mutex_unlock(&sep->sep_mutex);
+ return -EACCES;
+ }
+
+ mutex_unlock(&sep->sep_mutex);
+
+ switch (cmd) {
+ case SEP_IOCTLSETCALLERID:
+ mutex_lock(&sep->ioctl_mutex);
+ error = sep_set_caller_id_handler(sep, arg);
+ mutex_unlock(&sep->ioctl_mutex);
+ break;
+ default:
+ error = sep_ioctl(filp, cmd, arg);
+ break;
+ }
+ return error;
+}
+
+/**
+ * sep_request_daemon_ioctl - ioctl for daemon
+ * @filp: pointer to struct file
+ * @cmd: command
+ * @arg: pointer to argument structure
+ *
+ * Called by the request daemon to perform ioctls on the daemon device
+ */
+static long sep_request_daemon_ioctl(struct file *filp, u32 cmd,
+ unsigned long arg)
+{
+
+ long error;
+ struct sep_device *sep = filp->private_data;
+
+ /* Check that the command is for SEP device */
+ if (_IOC_TYPE(cmd) != SEP_IOC_MAGIC_NUMBER)
+ return -ENOTTY;
+
+ /* Only one process can access ioctl at any given time */
+ mutex_lock(&sep->ioctl_mutex);
+
+ switch (cmd) {
+ case SEP_IOCSENDSEPRPLYCOMMAND:
+ /* Send reply command to SEP */
+ error = sep_req_daemon_send_reply_command_handler(sep);
+ break;
+ case SEP_IOCENDTRANSACTION:
+ /*
+ * End req daemon transaction, do nothing
+ * will be removed upon update in middleware
+ * API library
+ */
+ error = 0;
+ break;
+ default:
+ error = -ENOTTY;
+ }
+ mutex_unlock(&sep->ioctl_mutex);
+ return error;
+}
+
+/**
+ * sep_inthandler - interrupt handler
+ * @irq: interrupt
+ * @dev_id: device id
+ */
+static irqreturn_t sep_inthandler(int irq, void *dev_id)
+{
+ irqreturn_t int_error = IRQ_HANDLED;
+ unsigned long lck_flags;
+ u32 reg_val, reg_val2 = 0;
+ struct sep_device *sep = dev_id;
+
+ /* Read the IRR register to check if this is SEP interrupt */
+ reg_val = sep_read_reg(sep, HW_HOST_IRR_REG_ADDR);
+
+ if (reg_val & (0x1 << 13)) {
+ /* Lock and update the counter of reply messages */
+ spin_lock_irqsave(&sep->snd_rply_lck, lck_flags);
+ sep->reply_ct++;
+ spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
+
+ dev_dbg(&sep->pdev->dev, "sep int: send_ct %lx reply_ct %lx\n",
+ sep->send_ct, sep->reply_ct);
+
+ /* Is this printf or daemon request? */
+ reg_val2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
+ dev_dbg(&sep->pdev->dev,
+ "SEP Interrupt - reg2 is %08x\n", reg_val2);
+
+ if ((reg_val2 >> 30) & 0x1) {
+ dev_dbg(&sep->pdev->dev, "int: printf request\n");
+ wake_up(&sep->event_request_daemon);
+ } else if (reg_val2 >> 31) {
+ dev_dbg(&sep->pdev->dev, "int: daemon request\n");
+ wake_up(&sep->event_request_daemon);
+ } else {
+ dev_dbg(&sep->pdev->dev, "int: SEP reply\n");
+ wake_up(&sep->event);
+ }
+ } else {
+ dev_dbg(&sep->pdev->dev, "int: not SEP interrupt\n");
+ int_error = IRQ_NONE;
+ }
+ if (int_error == IRQ_HANDLED)
+ sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, reg_val);
+
+ return int_error;
+}
+
+/**
+ * sep_reconfig_shared_area - reconfigure shared area
+ * @sep: pointer to struct sep_device
+ *
+ * Reconfig the shared area between HOST and SEP - needed in case
+ * the DX_CC_Init function was called before OS loading.
+ */
+static int sep_reconfig_shared_area(struct sep_device *sep)
+{
+ int ret_val;
+
+ /* use to limit waiting for SEP */
+ unsigned long end_time;
+
+ /* Send the new SHARED MESSAGE AREA to the SEP */
+ dev_dbg(&sep->pdev->dev, "reconfig shared; sending %08llx to sep\n",
+ (unsigned long long)sep->shared_bus);
+
+ sep_write_reg(sep, HW_HOST_HOST_SEP_GPR1_REG_ADDR, sep->shared_bus);
+
+ /* Poll for SEP response */
+ ret_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR);
+
+ end_time = jiffies + (WAIT_TIME * HZ);
+
+ while ((time_before(jiffies, end_time)) && (ret_val != 0xffffffff) &&
+ (ret_val != sep->shared_bus))
+ ret_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR);
+
+ /* Check the return value (register) */
+ if (ret_val != sep->shared_bus) {
+ dev_warn(&sep->pdev->dev, "could not reconfig shared area\n");
+ dev_warn(&sep->pdev->dev, "result was %x\n", ret_val);
+ ret_val = -ENOMEM;
+ } else
+ ret_val = 0;
+
+ dev_dbg(&sep->pdev->dev, "reconfig shared area end\n");
+ return ret_val;
+}
+
+/* File operation for singleton SEP operations */
+static const struct file_operations singleton_file_operations = {
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = sep_singleton_ioctl,
+ .poll = sep_poll,
+ .open = sep_singleton_open,
+ .release = sep_singleton_release,
+ .mmap = sep_mmap,
+};
+
+/* File operation for daemon operations */
+static const struct file_operations daemon_file_operations = {
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = sep_request_daemon_ioctl,
+ .poll = sep_request_daemon_poll,
+ .open = sep_request_daemon_open,
+ .release = sep_request_daemon_release,
+ .mmap = sep_request_daemon_mmap,
+};
+
+/* The files operations structure of the driver */
+static const struct file_operations sep_file_operations = {
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = sep_ioctl,
+ .poll = sep_poll,
+ .open = sep_open,
+ .release = sep_release,
+ .mmap = sep_mmap,
+};
+
+/**
+ * sep_register_driver_with_fs - register misc devices
+ * @sep: pointer to struct sep_device
+ *
+ * This function registers the driver with the file system
+ */
+static int sep_register_driver_with_fs(struct sep_device *sep)
+{
+ int ret_val;
+
+ sep->miscdev_sep.minor = MISC_DYNAMIC_MINOR;
+ sep->miscdev_sep.name = SEP_DEV_NAME;
+ sep->miscdev_sep.fops = &sep_file_operations;
+
+ sep->miscdev_singleton.minor = MISC_DYNAMIC_MINOR;
+ sep->miscdev_singleton.name = SEP_DEV_SINGLETON;
+ sep->miscdev_singleton.fops = &singleton_file_operations;
+
+ sep->miscdev_daemon.minor = MISC_DYNAMIC_MINOR;
+ sep->miscdev_daemon.name = SEP_DEV_DAEMON;
+ sep->miscdev_daemon.fops = &daemon_file_operations;
+
+ ret_val = misc_register(&sep->miscdev_sep);
+ if (ret_val) {
+ dev_warn(&sep->pdev->dev, "misc reg fails for SEP %x\n",
+ ret_val);
+ return ret_val;
+ }
+
+ ret_val = misc_register(&sep->miscdev_singleton);
+ if (ret_val) {
+ dev_warn(&sep->pdev->dev, "misc reg fails for sing %x\n",
+ ret_val);
+ misc_deregister(&sep->miscdev_sep);
+ return ret_val;
+ }
+
+ ret_val = misc_register(&sep->miscdev_daemon);
+ if (ret_val) {
+ dev_warn(&sep->pdev->dev, "misc reg fails for dmn %x\n",
+ ret_val);
+ misc_deregister(&sep->miscdev_sep);
+ misc_deregister(&sep->miscdev_singleton);
+
+ return ret_val;
+ }
+ return ret_val;
+}
+
+
+/**
+ * sep_probe - probe a matching PCI device
+ * @pdev: pci_device
+ * @end: pci_device_id
+ *
+ * Attempt to set up and configure a SEP device that has been
+ * discovered by the PCI layer.
+ */
+static int __devinit sep_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int error = 0;
+ struct sep_device *sep;
+
+ if (sep_dev != NULL) {
+ dev_warn(&pdev->dev, "only one SEP supported.\n");
+ return -EBUSY;
+ }
+
+ /* Enable the device */
+ error = pci_enable_device(pdev);
+ if (error) {
+ dev_warn(&pdev->dev, "error enabling pci device\n");
+ goto end_function;
+ }
+
+ /* Allocate the sep_device structure for this device */
+ sep_dev = kzalloc(sizeof(struct sep_device), GFP_ATOMIC);
+ if (sep_dev == NULL) {
+ dev_warn(&pdev->dev,
+ "can't kmalloc the sep_device structure\n");
+ error = -ENOMEM;
+ goto end_function_disable_device;
+ }
+
+ /*
+ * We're going to use another variable for actually
+ * working with the device; this way, if we have
+ * multiple devices in the future, it would be easier
+ * to make appropriate changes
+ */
+ sep = sep_dev;
+
+ sep->pdev = pci_dev_get(pdev);
+
+ init_waitqueue_head(&sep->event);
+ init_waitqueue_head(&sep->event_request_daemon);
+ spin_lock_init(&sep->snd_rply_lck);
+ mutex_init(&sep->sep_mutex);
+ mutex_init(&sep->ioctl_mutex);
+
+ dev_dbg(&sep->pdev->dev, "sep probe: PCI obtained, device being prepared\n");
+ dev_dbg(&sep->pdev->dev, "revision is %d\n", sep->pdev->revision);
+
+ /* Set up our register area */
+ sep->reg_physical_addr = pci_resource_start(sep->pdev, 0);
+ if (!sep->reg_physical_addr) {
+ dev_warn(&sep->pdev->dev, "Error getting register start\n");
+ error = -ENODEV;
+ goto end_function_free_sep_dev;
+ }
+
+ sep->reg_physical_end = pci_resource_end(sep->pdev, 0);
+ if (!sep->reg_physical_end) {
+ dev_warn(&sep->pdev->dev, "Error getting register end\n");
+ error = -ENODEV;
+ goto end_function_free_sep_dev;
+ }
+
+ sep->reg_addr = ioremap_nocache(sep->reg_physical_addr,
+ (size_t)(sep->reg_physical_end - sep->reg_physical_addr + 1));
+ if (!sep->reg_addr) {
+ dev_warn(&sep->pdev->dev, "Error getting register virtual\n");
+ error = -ENODEV;
+ goto end_function_free_sep_dev;
+ }
+
+ dev_dbg(&sep->pdev->dev,
+ "Register area start %llx end %llx virtual %p\n",
+ (unsigned long long)sep->reg_physical_addr,
+ (unsigned long long)sep->reg_physical_end,
+ sep->reg_addr);
+
+ /* Allocate the shared area */
+ sep->shared_size = SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES +
+ SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES +
+ SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES +
+ SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES +
+ SEP_DRIVER_SYSTEM_DATA_MEMORY_SIZE_IN_BYTES;
+
+ if (sep_map_and_alloc_shared_area(sep)) {
+ error = -ENOMEM;
+ /* Allocation failed */
+ goto end_function_error;
+ }
+
+ sep->rar_size = FAKE_RAR_SIZE;
+ sep->rar_addr = dma_alloc_coherent(&sep->pdev->dev,
+ sep->rar_size, &sep->rar_bus, GFP_KERNEL);
+ if (sep->rar_addr == NULL) {
+ dev_warn(&sep->pdev->dev, "can't allocate mfld rar\n");
+ error = -ENOMEM;
+ goto end_function_deallocate_sep_shared_area;
+ }
+
+ dev_dbg(&sep->pdev->dev, "rar start is %p, phy is %llx,"
+ " size is %zx\n", sep->rar_addr,
+ (unsigned long long)sep->rar_bus,
+ sep->rar_size);
+
+ /* Clear ICR register */
+ sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, 0xFFFFFFFF);
+
+ /* Set the IMR register - open only GPR 2 */
+ sep_write_reg(sep, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13)));
+
+ /* Read send/receive counters from SEP */
+ sep->reply_ct = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
+ sep->reply_ct &= 0x3FFFFFFF;
+ sep->send_ct = sep->reply_ct;
+
+ /* Get the interrupt line */
+ error = request_irq(pdev->irq, sep_inthandler, IRQF_SHARED,
+ "sep_driver", sep);
+
+ if (error)
+ goto end_function_dealloc_rar;
+
+ /* The new chip requires a shared area reconfigure */
+ if (sep->pdev->revision == 4) { /* Only for new chip */
+ error = sep_reconfig_shared_area(sep);
+ if (error)
+ goto end_function_free_irq;
+ }
+ /* Finally magic up the device nodes */
+ /* Register driver with the fs */
+ error = sep_register_driver_with_fs(sep);
+ if (error == 0)
+ /* Success */
+ return 0;
+
+end_function_free_irq:
+ free_irq(pdev->irq, sep);
+
+end_function_dealloc_rar:
+ if (sep->rar_addr)
+ dma_free_coherent(&sep->pdev->dev, sep->rar_size,
+ sep->rar_addr, sep->rar_bus);
+ goto end_function;
+
+end_function_deallocate_sep_shared_area:
+ /* De-allocate shared area */
+ sep_unmap_and_free_shared_area(sep);
+
+end_function_error:
+ iounmap(sep->reg_addr);
+
+end_function_free_sep_dev:
+ pci_dev_put(sep_dev->pdev);
+ kfree(sep_dev);
+ sep_dev = NULL;
+
+end_function_disable_device:
+ pci_disable_device(pdev);
+
+end_function:
+ return error;
+}
+
+static void sep_remove(struct pci_dev *pdev)
+{
+ struct sep_device *sep = sep_dev;
+
+ /* Unregister from fs */
+ misc_deregister(&sep->miscdev_sep);
+ misc_deregister(&sep->miscdev_singleton);
+ misc_deregister(&sep->miscdev_daemon);
+
+ /* Free the irq */
+ free_irq(sep->pdev->irq, sep);
+
+ /* Free the shared area */
+ sep_unmap_and_free_shared_area(sep_dev);
+ iounmap((void *) sep_dev->reg_addr);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(sep_pci_id_tbl) = {
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MFLD_PCI_DEVICE_ID)},
+ {0}
+};
+
+MODULE_DEVICE_TABLE(pci, sep_pci_id_tbl);
+
+/* Field for registering driver to PCI device */
+static struct pci_driver sep_pci_driver = {
+ .name = "sep_sec_driver",
+ .id_table = sep_pci_id_tbl,
+ .probe = sep_probe,
+ .remove = sep_remove
+};
+
+
+/**
+ * sep_init - init function
+ *
+ * Module load time. Register the PCI device driver.
+ */
+static int __init sep_init(void)
+{
+ return pci_register_driver(&sep_pci_driver);
+}
+
+
+/**
+ * sep_exit - called to unload driver
+ *
+ * Drop the misc devices then remove and unmap the various resources
+ * that are not released by the driver remove method.
+ */
+static void __exit sep_exit(void)
+{
+ pci_unregister_driver(&sep_pci_driver);
+}
+
+
+module_init(sep_init);
+module_exit(sep_exit);
+
+MODULE_LICENSE("GPL");
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists