[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-rc6+ (sarah@xanatos) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #763 SMP PREEMPT Tue Mar 1 07:14:52 PST 2011 [ 0.000000] Command line: root=UUID=17b05cc8-db3c-4770-8c5e-8702f049f6d1 ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bd6a1000 (usable) [ 0.000000] BIOS-e820: 00000000bd6a1000 - 00000000bd6a7000 (reserved) [ 0.000000] BIOS-e820: 00000000bd6a7000 - 00000000bd7b7000 (usable) [ 0.000000] BIOS-e820: 00000000bd7b7000 - 00000000bd80f000 (reserved) [ 0.000000] BIOS-e820: 00000000bd80f000 - 00000000bd8c7000 (usable) [ 0.000000] BIOS-e820: 00000000bd8c7000 - 00000000bd8d2000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bd8d2000 - 00000000bd8d5000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bd8d5000 - 00000000bd8d9000 (reserved) [ 0.000000] BIOS-e820: 00000000bd8d9000 - 00000000bd8dd000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bd8dd000 - 00000000bd8e0000 (reserved) [ 0.000000] BIOS-e820: 00000000bd8e0000 - 00000000bd907000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bd907000 - 00000000bd908000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bd908000 - 00000000bdb0f000 (reserved) [ 0.000000] BIOS-e820: 00000000bdb0f000 - 00000000bdb9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bdb9f000 - 00000000bdbff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bdbff000 - 00000000bdc00000 (usable) [ 0.000000] BIOS-e820: 00000000bdc00000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: LENOVO 74663HU/74663HU, BIOS 6DET44WW (2.08 ) 04/22/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-DBFFF uncachable [ 0.000000] DC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 13C000000 mask FFC000000 uncachable [ 0.000000] 1 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 2 base 000000000 mask F80000000 write-back [ 0.000000] 3 base 080000000 mask FC0000000 write-back [ 0.000000] 4 base 100000000 mask FC0000000 write-back [ 0.000000] 5 base 0BDE00000 mask FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bde00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbdc00 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bdc00000 [ 0.000000] 0000000000 - 00bdc00000 page 2M [ 0.000000] kernel direct mapping tables up to bdc00000 @ 1fffc000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000013c000000 [ 0.000000] 0100000000 - 013c000000 page 2M [ 0.000000] kernel direct mapping tables up to 13c000000 @ bd8c1000-bd8c7000 [ 0.000000] RAMDISK: 35dce000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f7380 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000bdb7bdd4 00094 (v01 LENOVO TP-6D 00002080 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bdb7bf00 000F4 (v03 LENOVO TP-6D 00002080 LNVO 00000001) [ 0.000000] ACPI: DSDT 00000000bdb7c2f4 0D881 (v01 LENOVO TP-6D 00002080 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000bdb8e000 00040 [ 0.000000] ACPI: SSDT 00000000bdb7c0b4 00240 (v01 LENOVO TP-6D 00002080 MSFT 03000000) [ 0.000000] ACPI: ECDT 00000000bdb89b75 00052 (v01 LENOVO TP-6D 00002080 LNVO 00000001) [ 0.000000] ACPI: APIC 00000000bdb89bc7 00078 (v01 LENOVO TP-6D 00002080 LNVO 00000001) [ 0.000000] ACPI: MCFG 00000000bdb89c3f 0003C (v01 LENOVO TP-6D 00002080 LNVO 00000001) [ 0.000000] ACPI: HPET 00000000bdb89c7b 00038 (v01 LENOVO TP-6D 00002080 LNVO 00000001) [ 0.000000] ACPI: SLIC 00000000bdb89dc2 00176 (v01 LENOVO TP-6D 00002080 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bdb89f38 00028 (v01 LENOVO TP-6D 00002080 LTP 00000001) [ 0.000000] ACPI: ASF! 00000000bdb89f60 000A0 (v16 LENOVO TP-6D 00002080 PTL 00000001) [ 0.000000] ACPI: SSDT 00000000bdb8d203 0055F (v01 LENOVO TP-6D 00002080 INTL 20050513) [ 0.000000] ACPI: TCPA 00000000bd907000 00032 (v00 00000000 00000000) [ 0.000000] ACPI: SSDT 00000000bd8d4000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bd8d3000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bd8d2000 00242 (v01 PmRef ApTst 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff8800b0000000-ffff8800b37fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0013c000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bd6a1 [ 0.000000] 0: 0x000bd6a7 -> 0x000bd7b7 [ 0.000000] 0: 0x000bd80f -> 0x000bd8c7 [ 0.000000] 0: 0x000bdbff -> 0x000bdc00 [ 0.000000] 0: 0x00100000 -> 0x0013c000 [ 0.000000] On node 0 totalpages: 1021944 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3920 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 757922 pages, LIFO batch:31 [ 0.000000] Normal zone: 3360 pages used for memmap [ 0.000000] Normal zone: 242400 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] 4 Processors exceeds NR_CPUS limit of 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bd6a1000 - 00000000bd6a7000 [ 0.000000] PM: Registered nosave memory: 00000000bd7b7000 - 00000000bd80f000 [ 0.000000] PM: Registered nosave memory: 00000000bd8c7000 - 00000000bd8d2000 [ 0.000000] PM: Registered nosave memory: 00000000bd8d2000 - 00000000bd8d5000 [ 0.000000] PM: Registered nosave memory: 00000000bd8d5000 - 00000000bd8d9000 [ 0.000000] PM: Registered nosave memory: 00000000bd8d9000 - 00000000bd8dd000 [ 0.000000] PM: Registered nosave memory: 00000000bd8dd000 - 00000000bd8e0000 [ 0.000000] PM: Registered nosave memory: 00000000bd8e0000 - 00000000bd907000 [ 0.000000] PM: Registered nosave memory: 00000000bd907000 - 00000000bd908000 [ 0.000000] PM: Registered nosave memory: 00000000bd908000 - 00000000bdb0f000 [ 0.000000] PM: Registered nosave memory: 00000000bdb0f000 - 00000000bdb9f000 [ 0.000000] PM: Registered nosave memory: 00000000bdb9f000 - 00000000bdbff000 [ 0.000000] PM: Registered nosave memory: 00000000bdc00000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000 [ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff8800bd400000 s75840 r8192 d22464 u1048576 [ 0.000000] pcpu-alloc: s75840 r8192 d22464 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1004242 [ 0.000000] Kernel command line: root=UUID=17b05cc8-db3c-4770-8c5e-8702f049f6d1 ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 3905952k/5177344k available (4763k kernel code, 1089568k absent, 181824k reserved, 3941k data, 524k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:320 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 5823 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1861.862 MHz processor. [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.72 BogoMIPS (lpj=7447448) [ 0.004143] pid_max: default: 32768 minimum: 301 [ 0.008653] Mount-cache hash table entries: 256 [ 0.011578] Initializing cgroup subsys ns [ 0.011647] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.011748] Initializing cgroup subsys cpuacct [ 0.011845] Initializing cgroup subsys memory [ 0.012170] Initializing cgroup subsys freezer [ 0.012624] CPU: Physical Processor ID: 0 [ 0.012689] CPU: Processor Core ID: 0 [ 0.012751] using mwait in idle threads. [ 0.012926] ACPI: Core revision 20110112 [ 0.360621] Setting APIC routing to flat [ 0.364482] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.404263] CPU0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz stepping 0a [ 0.408024] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.408024] ... version: 2 [ 0.408024] ... bit width: 40 [ 0.408024] ... generic registers: 2 [ 0.408024] ... value mask: 000000ffffffffff [ 0.408024] ... max period: 000000007fffffff [ 0.408024] ... fixed-purpose events: 3 [ 0.408024] ... event mask: 0000000700000003 [ 0.416380] NMI watchdog enabled, takes one hw-pmu counter. [ 0.428064] lockdep: fixing up alternatives. [ 0.432247] Booting Node 0, Processors #1 Ok. [ 0.528187] NMI watchdog enabled, takes one hw-pmu counter. [ 0.532058] Brought up 2 CPUs [ 0.532125] Total of 2 processors activated (7447.70 BogoMIPS). [ 0.543139] NET: Registered protocol family 16 [ 0.548529] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.548634] ACPI: bus type pci registered [ 0.550207] PCI: Using configuration type 1 for base access [ 0.581849] bio: create slab at 0 [ 0.603247] ACPI: EC: EC description table is found, configuring boot EC [ 0.947154] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 1.036584] ACPI: SSDT 00000000bd8d7c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 1.043648] ACPI: Dynamic OEM Table Load: [ 1.043803] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 1.053093] ACPI: SSDT 00000000bd8d5020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 1.065258] ACPI: Dynamic OEM Table Load: [ 1.065413] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 1.114036] ACPI: SSDT 00000000bd8d6ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 1.123383] ACPI: Dynamic OEM Table Load: [ 1.123537] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 1.144465] ACPI: SSDT 00000000bd8d6f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 1.150586] ACPI: Dynamic OEM Table Load: [ 1.150739] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 1.179656] ACPI: Interpreter enabled [ 1.179726] ACPI: (supports S0 S3 S4 S5) [ 1.180881] ACPI: Using IOAPIC for interrupt routing [ 1.348930] ACPI: Power Resource [PUBS] (on) [ 1.492995] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 1.553379] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 1.553457] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.569716] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.571628] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 1.571706] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 1.571781] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.571869] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 1.571955] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 1.572043] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] [ 1.572417] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600 [ 1.572625] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300 [ 1.572674] pci 0000:00:02.0: reg 10: [mem 0xf2000000-0xf23fffff 64bit] [ 1.572704] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.572725] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] [ 1.572878] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380 [ 1.572919] pci 0000:00:02.1: reg 10: [mem 0xf2400000-0xf24fffff 64bit] [ 1.573122] pci 0000:00:03.0: [8086:2a44] type 0 class 0x000780 [ 1.573173] pci 0000:00:03.0: reg 10: [mem 0xf2826800-0xf282680f 64bit] [ 1.573305] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.573316] pci 0000:00:03.0: PME# disabled [ 1.573410] pci 0000:00:03.2: [8086:2a46] type 0 class 0x000101 [ 1.573453] pci 0000:00:03.2: reg 10: [io 0x1828-0x182f] [ 1.573475] pci 0000:00:03.2: reg 14: [io 0x180c-0x180f] [ 1.573498] pci 0000:00:03.2: reg 18: [io 0x1820-0x1827] [ 1.573520] pci 0000:00:03.2: reg 1c: [io 0x1808-0x180b] [ 1.573542] pci 0000:00:03.2: reg 20: [io 0x1810-0x181f] [ 1.573708] pci 0000:00:03.3: [8086:2a47] type 0 class 0x000700 [ 1.573749] pci 0000:00:03.3: reg 10: [io 0x1830-0x1837] [ 1.573772] pci 0000:00:03.3: reg 14: [mem 0xf2624000-0xf2624fff] [ 1.574082] pci 0000:00:19.0: [8086:10f5] type 0 class 0x000200 [ 1.574139] pci 0000:00:19.0: reg 10: [mem 0xf2600000-0xf261ffff] [ 1.574165] pci 0000:00:19.0: reg 14: [mem 0xf2625000-0xf2625fff] [ 1.574192] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f] [ 1.574347] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 1.574360] pci 0000:00:19.0: PME# disabled [ 1.574454] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 [ 1.574579] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f] [ 1.574748] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 [ 1.574873] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f] [ 1.575041] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03 [ 1.575165] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf] [ 1.575361] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 [ 1.575417] pci 0000:00:1a.7: reg 10: [mem 0xf2826c00-0xf2826fff] [ 1.575613] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.575626] pci 0000:00:1a.7: PME# disabled [ 1.575732] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 [ 1.575779] pci 0000:00:1b.0: reg 10: [mem 0xf2620000-0xf2623fff 64bit] [ 1.575970] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.575983] pci 0000:00:1b.0: PME# disabled [ 1.576142] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 [ 1.576340] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.576353] pci 0000:00:1c.0: PME# disabled [ 1.576455] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604 [ 1.576651] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.576664] pci 0000:00:1c.1: PME# disabled [ 1.576768] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604 [ 1.576965] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.576978] pci 0000:00:1c.3: PME# disabled [ 1.577093] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 [ 1.577218] pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df] [ 1.577389] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 [ 1.577514] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff] [ 1.577683] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 [ 1.577807] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f] [ 1.578004] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 [ 1.578061] pci 0000:00:1d.7: reg 10: [mem 0xf2827000-0xf28273ff] [ 1.578257] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.578270] pci 0000:00:1d.7: PME# disabled [ 1.578365] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 1.578584] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601 [ 1.578923] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106 [ 1.578985] pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f] [ 1.579012] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f] [ 1.579038] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47] [ 1.579065] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b] [ 1.579091] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f] [ 1.579118] pci 0000:00:1f.2: reg 24: [mem 0xf2826000-0xf28267ff] [ 1.579230] pci 0000:00:1f.2: PME# supported from D3hot [ 1.579243] pci 0000:00:1f.2: PME# disabled [ 1.579336] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 [ 1.579384] pci 0000:00:1f.3: reg 10: [mem 0xf2827400-0xf28274ff 64bit] [ 1.579451] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f] [ 1.579698] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 1.579778] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.579791] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.579811] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.580324] pci 0000:03:00.0: [8086:4237] type 0 class 0x000280 [ 1.580463] pci 0000:03:00.0: reg 10: [mem 0xf2500000-0xf2501fff 64bit] [ 1.581030] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 1.581071] pci 0000:03:00.0: PME# disabled [ 1.581282] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 1.581360] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 1.581374] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff] [ 1.581393] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.581562] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 1.581640] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 1.581653] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] [ 1.581672] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref] [ 1.581905] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode) [ 1.581988] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.582002] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.582021] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.582050] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.582078] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.582106] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.582135] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 1.582163] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 1.582191] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) [ 1.582250] pci_bus 0000:00: on NUMA node 0 [ 1.582304] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.597743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 1.601094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 1.604764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 2.099212] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 2.104225] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 2.109216] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 2.114096] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 2.119113] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 2.123980] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 2.129036] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 2.134062] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 2.136646] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 2.137174] vgaarb: loaded [ 2.140647] SCSI subsystem initialized [ 2.140777] libata version 3.00 loaded. [ 2.141803] PCI: Using ACPI for IRQ routing [ 2.141803] PCI: pci_cache_line_size set to 64 bytes [ 2.144270] reserve RAM buffer: 000000000009ec00 - 000000000009ffff [ 2.144296] reserve RAM buffer: 00000000bd6a1000 - 00000000bfffffff [ 2.144650] reserve RAM buffer: 00000000bd7b7000 - 00000000bfffffff [ 2.144943] reserve RAM buffer: 00000000bd8c7000 - 00000000bfffffff [ 2.145186] reserve RAM buffer: 00000000bdc00000 - 00000000bfffffff [ 2.147913] Bluetooth: Core ver 2.15 [ 2.148329] NET: Registered protocol family 31 [ 2.148398] Bluetooth: HCI device and connection manager initialized [ 2.148501] Bluetooth: HCI socket layer initialized [ 2.149363] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 2.156639] Switching to clocksource hpet [ 2.156904] pnp: PnP ACPI init [ 2.157329] ACPI: bus type pnp registered [ 2.159297] Switched to NOHz mode on CPU #0 [ 2.159460] Switched to NOHz mode on CPU #1 [ 2.209561] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 2.209586] pnp 00:00: [mem 0x000c0000-0x000c3fff] [ 2.209609] pnp 00:00: [mem 0x000c4000-0x000c7fff] [ 2.209630] pnp 00:00: [mem 0x000c8000-0x000cbfff] [ 2.209653] pnp 00:00: [mem 0x000cc000-0x000cffff] [ 2.209675] pnp 00:00: [mem 0x000d0000-0x000d3fff] [ 2.209697] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled] [ 2.209720] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled] [ 2.209743] pnp 00:00: [mem 0x000dc000-0x000dffff] [ 2.209764] pnp 00:00: [mem 0x000e0000-0x000e3fff] [ 2.209786] pnp 00:00: [mem 0x000e4000-0x000e7fff] [ 2.209809] pnp 00:00: [mem 0x000e8000-0x000ebfff] [ 2.209832] pnp 00:00: [mem 0x000ec000-0x000effff] [ 2.209854] pnp 00:00: [mem 0x000f0000-0x000fffff] [ 2.209876] pnp 00:00: [mem 0x00100000-0xbfffffff] [ 2.209898] pnp 00:00: [mem 0xfec00000-0xfed3ffff] [ 2.209920] pnp 00:00: [mem 0xfed4c000-0xffffffff] [ 2.211587] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 2.211710] system 00:00: [mem 0x000c0000-0x000c3fff] has been reserved [ 2.211832] system 00:00: [mem 0x000c4000-0x000c7fff] has been reserved [ 2.211951] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 2.212098] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 2.212217] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 2.212347] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 2.212477] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 2.212607] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 2.212737] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 2.212866] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 2.212996] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 2.213126] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved [ 2.213261] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 2.213391] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 2.213475] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.213959] pnp 00:01: [bus 00-ff] [ 2.213982] pnp 00:01: [io 0x0cf8-0x0cff] [ 2.214005] pnp 00:01: [io 0x0000-0x0cf7 window] [ 2.214028] pnp 00:01: [io 0x0d00-0xffff window] [ 2.214050] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 2.214074] pnp 00:01: [mem 0x000c0000-0x000c3fff window] [ 2.214096] pnp 00:01: [mem 0x000c4000-0x000c7fff window] [ 2.214122] pnp 00:01: [mem 0x000c8000-0x000cbfff window] [ 2.214145] pnp 00:01: [mem 0x000cc000-0x000cffff window] [ 2.214167] pnp 00:01: [mem 0x000d0000-0x000d3fff window] [ 2.214190] pnp 00:01: [mem 0x000d4000-0x000d7fff window] [ 2.214212] pnp 00:01: [mem 0x000d8000-0x000dbfff window] [ 2.214235] pnp 00:01: [mem 0x000dc000-0x000dffff window] [ 2.214257] pnp 00:01: [mem 0x000e0000-0x000e3fff window] [ 2.214281] pnp 00:01: [mem 0x000e4000-0x000e7fff window] [ 2.214303] pnp 00:01: [mem 0x000e8000-0x000ebfff window] [ 2.214325] pnp 00:01: [mem 0x000ec000-0x000effff window] [ 2.214348] pnp 00:01: [mem 0xc0000000-0xfebfffff window] [ 2.214370] pnp 00:01: [mem 0xfed40000-0xfed4bfff window] [ 2.215247] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 2.240979] pnp 00:02: [io 0x0010-0x001f] [ 2.241003] pnp 00:02: [io 0x0090-0x009f] [ 2.241025] pnp 00:02: [io 0x0024-0x0025] [ 2.241046] pnp 00:02: [io 0x0028-0x0029] [ 2.241067] pnp 00:02: [io 0x002c-0x002d] [ 2.241089] pnp 00:02: [io 0x0030-0x0031] [ 2.241110] pnp 00:02: [io 0x0034-0x0035] [ 2.241132] pnp 00:02: [io 0x0038-0x0039] [ 2.241154] pnp 00:02: [io 0x003c-0x003d] [ 2.241175] pnp 00:02: [io 0x00a4-0x00a5] [ 2.241197] pnp 00:02: [io 0x00a8-0x00a9] [ 2.241218] pnp 00:02: [io 0x00ac-0x00ad] [ 2.241239] pnp 00:02: [io 0x00b0-0x00b5] [ 2.241260] pnp 00:02: [io 0x00b8-0x00b9] [ 2.241282] pnp 00:02: [io 0x00bc-0x00bd] [ 2.241304] pnp 00:02: [io 0x0050-0x0053] [ 2.241325] pnp 00:02: [io 0x0072-0x0077] [ 2.241346] pnp 00:02: [io 0x002e-0x002f] [ 2.241367] pnp 00:02: [io 0x1000-0x107f] [ 2.241389] pnp 00:02: [io 0x1180-0x11ff] [ 2.241410] pnp 00:02: [io 0x0800-0x080f] [ 2.241432] pnp 00:02: [io 0x15e0-0x15ef] [ 2.241454] pnp 00:02: [io 0x1600-0x167f] [ 2.241476] pnp 00:02: [io 0x1680-0x169f] [ 2.241499] pnp 00:02: [mem 0xe0000000-0xefffffff] [ 2.241521] pnp 00:02: [mem 0xfed1c000-0xfed1ffff] [ 2.241543] pnp 00:02: [mem 0xfed10000-0xfed13fff] [ 2.241565] pnp 00:02: [mem 0xfed18000-0xfed18fff] [ 2.241588] pnp 00:02: [mem 0xfed19000-0xfed19fff] [ 2.241609] pnp 00:02: [mem 0xfed45000-0xfed4bfff] [ 2.243344] system 00:02: [io 0x1000-0x107f] has been reserved [ 2.243466] system 00:02: [io 0x1180-0x11ff] has been reserved [ 2.243585] system 00:02: [io 0x0800-0x080f] has been reserved [ 2.243702] system 00:02: [io 0x15e0-0x15ef] has been reserved [ 2.243820] system 00:02: [io 0x1600-0x167f] has been reserved [ 2.243936] system 00:02: [io 0x1680-0x169f] has been reserved [ 2.244083] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved [ 2.244203] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.244322] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved [ 2.244440] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.244558] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.244677] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved [ 2.244760] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.246232] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 2.247084] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 2.247398] pnp 00:04: [io 0x0000-0x000f] [ 2.247421] pnp 00:04: [io 0x0080-0x008f] [ 2.247443] pnp 00:04: [io 0x00c0-0x00df] [ 2.247465] pnp 00:04: [dma 4] [ 2.248344] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 2.248652] pnp 00:05: [io 0x0061] [ 2.249509] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 2.249821] pnp 00:06: [io 0x00f0] [ 2.249861] pnp 00:06: [irq 13] [ 2.250714] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 2.251025] pnp 00:07: [io 0x0070-0x0071] [ 2.251059] pnp 00:07: [irq 8] [ 2.251914] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.252388] pnp 00:08: [io 0x0060] [ 2.252410] pnp 00:08: [io 0x0064] [ 2.252443] pnp 00:08: [irq 1] [ 2.253309] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 2.253629] pnp 00:09: [irq 12] [ 2.254504] pnp 00:09: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active) [ 2.279523] pnp 00:0a: [mem 0xfed40000-0xfed44fff] [ 2.280415] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active) [ 2.289680] pnp: PnP ACPI: found 11 devices [ 2.289751] ACPI: ACPI bus type pnp unregistered [ 2.349213] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc01fffff] [ 2.349305] pci 0000:00:1c.0: BAR 9: assigned [mem 0xc0200000-0xc03fffff 64bit pref] [ 2.349407] pci 0000:00:1c.1: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref] [ 2.349506] pci 0000:00:1c.0: BAR 7: assigned [io 0x3000-0x3fff] [ 2.349590] pci 0000:00:1c.1: BAR 7: assigned [io 0x4000-0x4fff] [ 2.349669] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 2.349743] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 2.349824] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff] [ 2.349904] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref] [ 2.350004] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 2.350077] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 2.350158] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff] [ 2.350238] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref] [ 2.350337] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 2.350409] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 2.350490] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] [ 2.350570] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref] [ 2.350669] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] [ 2.350739] pci 0000:00:1e.0: bridge window [io disabled] [ 2.350819] pci 0000:00:1e.0: bridge window [mem disabled] [ 2.350896] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 2.351025] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.351107] pci 0000:00:1c.0: setting latency timer to 64 [ 2.351153] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.351234] pci 0000:00:1c.1: setting latency timer to 64 [ 2.351278] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2.351359] pci 0000:00:1c.3: setting latency timer to 64 [ 2.351378] pci 0000:00:1e.0: setting latency timer to 64 [ 2.351390] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 2.351397] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 2.351404] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 2.351412] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 2.351419] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 2.351426] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff] [ 2.351434] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 2.351440] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff] [ 2.351448] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref] [ 2.351455] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] [ 2.351462] pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff] [ 2.351469] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref] [ 2.351477] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] [ 2.351484] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff] [ 2.351491] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref] [ 2.351499] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7] [ 2.351506] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff] [ 2.351512] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff] [ 2.351520] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff] [ 2.351527] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff] [ 2.351534] pci_bus 0000:0d: resource 9 [mem 0xc0000000-0xfebfffff] [ 2.351855] NET: Registered protocol family 2 [ 2.352533] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.356140] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 2.359302] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) [ 2.367024] TCP: Hash tables configured (established 262144 bind 65536) [ 2.367162] TCP reno registered [ 2.367275] UDP hash table entries: 2048 (order: 6, 327680 bytes) [ 2.367910] UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes) [ 2.369512] NET: Registered protocol family 1 [ 2.369733] pci 0000:00:02.0: Boot video device [ 2.369894] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x00c0 [ 2.369901] pci 0000:00:1a.0: Performing full reset [ 2.369956] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x00c0 [ 2.369963] pci 0000:00:1a.1: Performing full reset [ 2.370017] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x00c0 [ 2.370024] pci 0000:00:1a.2: Performing full reset [ 2.370341] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x00c0 [ 2.370348] pci 0000:00:1d.0: Performing full reset [ 2.370402] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x00c0 [ 2.370408] pci 0000:00:1d.1: Performing full reset [ 2.370462] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x00c0 [ 2.370469] pci 0000:00:1d.2: Performing full reset [ 2.370765] PCI: CLS 64 bytes, default 64 [ 2.371626] Trying to unpack rootfs image as initramfs... [ 4.628812] Freeing initrd memory: 34952k freed [ 4.994494] DMA-API: preallocated 32768 debug entries [ 4.994574] DMA-API: debugging enabled by kernel config [ 4.994657] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 4.994733] Placing 64MB software IO TLB between ffff8800b8c9d000 - ffff8800bcc9d000 [ 4.994821] software IO TLB at phys 0xb8c9d000 - 0xbcc9d000 [ 4.995255] Simple Boot Flag at 0x35 set to 0x1 [ 4.998625] Scanning for low memory corruption every 60 seconds [ 5.000614] audit: initializing netlink socket (disabled) [ 5.000856] type=2000 audit(1298999433.996:1): initialized [ 5.041520] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 5.101409] fuse init (API version 7.16) [ 5.103638] msgmni has been set to 7697 [ 5.106580] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 5.106688] io scheduler noop registered [ 5.106755] io scheduler deadline registered [ 5.107574] io scheduler cfq registered (default) [ 5.111177] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.112182] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 5.113889] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 5.116520] ACPI: AC Adapter [AC] (off-line) [ 5.119752] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 5.148044] ACPI: Lid Switch [LID] [ 5.149660] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 5.200043] ACPI: Sleep Button [SLPB] [ 5.201705] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 5.201824] ACPI: Power Button [PWRF] [ 5.202322] ACPI: acpi_idle registered with cpuidle [ 5.479901] Monitor-Mwait will be used to enter C-1 state [ 5.480101] Monitor-Mwait will be used to enter C-2 state [ 5.480266] Monitor-Mwait will be used to enter C-3 state [ 5.480295] Marking TSC unstable due to TSC halts in idle [ 5.654039] thermal LNXTHERM:00: registered as thermal_zone0 [ 5.654115] ACPI: Thermal Zone [THM0] (48 C) [ 5.675905] thermal LNXTHERM:01: registered as thermal_zone1 [ 5.675980] ACPI: Thermal Zone [THM1] (50 C) [ 5.677312] Linux agpgart interface v0.103 [ 5.715096] brd: module loaded [ 5.733869] loop: module loaded [ 5.737116] ahci 0000:00:1f.2: version 3.0 [ 5.737233] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 5.737797] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 5.738032] ahci: SSS flag set, parallel bus scan disabled [ 5.738250] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 5.738403] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs [ 5.738597] ahci 0000:00:1f.2: setting latency timer to 64 [ 5.762241] scsi0 : ahci [ 5.765114] scsi1 : ahci [ 5.767894] scsi2 : ahci [ 5.770864] scsi3 : ahci [ 5.780167] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 5.780471] ACPI: Battery Slot [BAT0] (battery present) [ 5.792777] ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 40 [ 5.792869] ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826180 irq 40 [ 5.792956] ata3: DUMMY [ 5.793017] ata4: DUMMY [ 5.794536] ata_generic 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.794917] ata_generic 0000:00:03.2: setting latency timer to 64 [ 5.809432] scsi4 : ata_generic [ 5.811808] scsi5 : ata_generic [ 5.813945] ata5: PATA max UDMA/100 cmd 0x1828 ctl 0x180c bmdma 0x1810 irq 18 [ 5.814024] ata6: PATA max UDMA/100 cmd 0x1820 ctl 0x1808 bmdma 0x1818 irq 18 [ 5.814739] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2 [ 5.814813] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 5.815060] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 5.815186] e1000e 0000:00:19.0: setting latency timer to 64 [ 5.815759] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 6.112057] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.120456] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 6.120468] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 6.120561] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 6.137481] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:16:1d:fb:eb [ 6.137575] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 6.137681] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF [ 6.138124] PPP generic driver version 2.4.2 [ 6.140095] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 6.151434] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.152451] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 6.154721] mousedev: PS/2 mouse device common for all mice [ 6.158116] rtc_cmos 00:07: RTC can wake from S4 [ 6.162359] ata1.00: ATA-8: ST9250410AS, 0002SDM1, max UDMA/133 [ 6.162435] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 6.164424] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 6.169482] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 6.169684] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 6.169908] Linux video capture interface: v2.00 [ 6.171090] device-mapper: uevent: version 1.0.3 [ 6.172308] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 6.172319] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 6.172413] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 6.172717] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 6.173244] device-mapper: multipath: version 1.2.0 loaded [ 6.173347] device-mapper: multipath round-robin: version 1.0.0 loaded [ 6.174762] ata1.00: configured for UDMA/133 [ 6.176531] scsi 0:0:0:0: Direct-Access ATA ST9250410AS 0002 PQ: 0 ANSI: 5 [ 6.179668] cpuidle: using governor ladder [ 6.183356] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.183916] cpuidle: using governor menu [ 6.184957] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 6.186867] sd 0:0:0:0: [sda] Write Protect is off [ 6.186940] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.187388] TCP cubic registered [ 6.187562] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.190588] NET: Registered protocol family 10 [ 6.196843] NET: Registered protocol family 17 [ 6.197287] Bluetooth: L2CAP ver 2.15 [ 6.197652] Bluetooth: L2CAP socket layer initialized [ 6.197761] Bluetooth: SCO (Voice Link) ver 0.6 [ 6.197828] Bluetooth: SCO socket layer initialized [ 6.198240] Bluetooth: RFCOMM TTY layer initialized [ 6.198351] Bluetooth: RFCOMM socket layer initialized [ 6.198420] Bluetooth: RFCOMM ver 1.11 [ 6.198485] Registering the dns_resolver key type [ 6.230102] sda: sda1 sda2 < sda5 > [ 6.234717] registered taskstats version 1 [ 6.235030] kmemleak: Kernel memory leak detector initialized [ 6.237644] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.237771] kmemleak: Automatic memory scanning thread started [ 6.238051] rtc_cmos 00:07: setting system clock to 2011-03-01 17:10:35 UTC (1298999435) [ 6.238160] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 6.238240] EDD information not available. [ 6.504086] ata2: SATA link down (SStatus 0 SControl 300) [ 6.674612] Freeing unused kernel memory: 524k freed [ 6.675088] Write protecting the kernel read-only data: 8192k [ 6.688716] Freeing unused kernel memory: 1360k freed [ 6.690038] Freeing unused kernel memory: 8k freed [ 6.695340] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 6.718874] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input4 [ 7.005918] udevd (120): /proc/120/oom_adj is deprecated, please use /proc/120/oom_score_adj instead. [ 7.363838] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 7.364800] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 7.380548] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 7.383015] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 7.898893] usbcore: registered new interface driver usbfs [ 7.899956] usbcore: registered new interface driver hub [ 7.907629] [drm] Initialized drm 1.1.0 20060810 [ 7.911598] usbcore: registered new device driver usb [ 7.954955] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.955042] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 7.955328] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 7.955445] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 7.955535] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 7.955778] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 7.955789] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 7.956077] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 7.965603] uhci_hcd: USB Universal Host Controller Interface driver [ 7.968486] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 7.968499] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 7.968931] ehci_hcd 0000:00:1a.7: debug port 1 [ 7.969008] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 7.972924] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 7.972932] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 7.973299] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xf2826c00 [ 7.973378] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 7.977514] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 7.990304] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 7.991535] usb usb1: default language 0x0409 [ 7.991910] usb usb1: udev 1, busnum 1, minor = 0 [ 7.991918] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.992142] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.992233] usb usb1: Product: EHCI Host Controller [ 7.992308] usb usb1: Manufacturer: Linux 2.6.38-rc6+ ehci_hcd [ 7.992384] usb usb1: SerialNumber: 0000:00:1a.7 [ 7.994447] usb usb1: usb_probe_device [ 7.994457] usb usb1: configuration #1 chosen from 1 choice [ 7.994750] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 7.996146] hub 1-0:1.0: usb_probe_interface [ 7.996154] hub 1-0:1.0: usb_probe_interface - got id [ 7.996166] hub 1-0:1.0: USB hub found [ 7.996507] hub 1-0:1.0: 6 ports detected [ 7.996611] hub 1-0:1.0: standalone hub [ 7.996617] hub 1-0:1.0: no power switching (usb 1.0) [ 7.996623] hub 1-0:1.0: individual port over-current protection [ 7.996631] hub 1-0:1.0: power on to power good time: 20ms [ 7.996909] hub 1-0:1.0: local power source is good [ 7.996950] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 8.001808] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 8.001925] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 8.002014] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 8.002148] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 8.002158] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 8.002353] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 8.012087] uhci_hcd 0000:00:1a.0: detected 2 ports [ 8.012170] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 8.012176] uhci_hcd 0000:00:1a.0: Performing full reset [ 8.012201] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 8.012586] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 8.013535] usb usb2: default language 0x0409 [ 8.013914] usb usb2: udev 1, busnum 2, minor = 128 [ 8.013922] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.013998] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.014085] usb usb2: Product: UHCI Host Controller [ 8.014154] usb usb2: Manufacturer: Linux 2.6.38-rc6+ uhci_hcd [ 8.014226] usb usb2: SerialNumber: 0000:00:1a.0 [ 8.018769] usb usb2: usb_probe_device [ 8.018779] usb usb2: configuration #1 chosen from 1 choice [ 8.018962] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 8.020258] hub 2-0:1.0: usb_probe_interface [ 8.020265] hub 2-0:1.0: usb_probe_interface - got id [ 8.020276] hub 2-0:1.0: USB hub found [ 8.020564] hub 2-0:1.0: 2 ports detected [ 8.020671] hub 2-0:1.0: standalone hub [ 8.020677] hub 2-0:1.0: no power switching (usb 1.0) [ 8.020683] hub 2-0:1.0: individual port over-current protection [ 8.020690] hub 2-0:1.0: power on to power good time: 2ms [ 8.020912] hub 2-0:1.0: local power source is good [ 8.020955] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 8.024747] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 8.025267] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 8.025399] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 8.025409] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 8.025596] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 [ 8.040342] uhci_hcd 0000:00:1a.1: detected 2 ports [ 8.040422] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 8.040429] uhci_hcd 0000:00:1a.1: Performing full reset [ 8.040813] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 8.041628] usb usb3: default language 0x0409 [ 8.042005] usb usb3: udev 1, busnum 3, minor = 256 [ 8.042013] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.042089] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.042176] usb usb3: Product: UHCI Host Controller [ 8.042245] usb usb3: Manufacturer: Linux 2.6.38-rc6+ uhci_hcd [ 8.042317] usb usb3: SerialNumber: 0000:00:1a.1 [ 8.046692] usb usb3: usb_probe_device [ 8.046701] usb usb3: configuration #1 chosen from 1 choice [ 8.046882] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 8.048181] hub 3-0:1.0: usb_probe_interface [ 8.048189] hub 3-0:1.0: usb_probe_interface - got id [ 8.048199] hub 3-0:1.0: USB hub found [ 8.048498] hub 3-0:1.0: 2 ports detected [ 8.048607] hub 3-0:1.0: standalone hub [ 8.048613] hub 3-0:1.0: no power switching (usb 1.0) [ 8.048619] hub 3-0:1.0: individual port over-current protection [ 8.048627] hub 3-0:1.0: power on to power good time: 2ms [ 8.048868] hub 3-0:1.0: local power source is good [ 8.048913] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 8.052785] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1 [ 8.053367] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 8.053485] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 8.053608] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 8.053859] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 8.053870] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 8.054697] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 8.068340] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 8.068354] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 8.068743] ehci_hcd 0000:00:1d.7: debug port 1 [ 8.068820] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 8.072716] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 8.072723] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 8.073092] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf2827000 [ 8.073172] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 8.077071] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 8.088124] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 8.089094] usb usb4: default language 0x0409 [ 8.089488] usb usb4: udev 1, busnum 4, minor = 384 [ 8.089496] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.089573] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.089661] usb usb4: Product: EHCI Host Controller [ 8.089730] usb usb4: Manufacturer: Linux 2.6.38-rc6+ ehci_hcd [ 8.089801] usb usb4: SerialNumber: 0000:00:1d.7 [ 8.094128] usb usb4: usb_probe_device [ 8.094138] usb usb4: configuration #1 chosen from 1 choice [ 8.094328] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 8.095638] hub 4-0:1.0: usb_probe_interface [ 8.095646] hub 4-0:1.0: usb_probe_interface - got id [ 8.095657] hub 4-0:1.0: USB hub found [ 8.096188] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001403 0 ACK POWER sig=k CSC CONNECT [ 8.096216] hub 1-0:1.0: port 1: status 0501 change 0001 [ 8.096385] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT [ 8.096411] hub 1-0:1.0: port 3: status 0501 change 0001 [ 8.096657] hub 4-0:1.0: 6 ports detected [ 8.096765] hub 4-0:1.0: standalone hub [ 8.096770] hub 4-0:1.0: no power switching (usb 1.0) [ 8.096776] hub 4-0:1.0: individual port over-current protection [ 8.096784] hub 4-0:1.0: power on to power good time: 20ms [ 8.097021] hub 4-0:1.0: local power source is good [ 8.097062] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 8.102471] i915 0000:00:02.0: power state changed by ACPI to D0 [ 8.102594] i915 0000:00:02.0: power state changed by ACPI to D0 [ 8.102678] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.102758] i915 0000:00:02.0: setting latency timer to 64 [ 8.120117] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00 [ 8.132062] Monitor-Mwait will be used to enter C-3 state [ 8.148169] uhci_hcd 0000:00:1a.1: port 1 portsc 0082,00 [ 8.196106] hub 1-0:1.0: state 7 ports 6 chg 000a evt 0000 [ 8.196186] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 8.196215] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT [ 8.196245] hub 4-0:1.0: port 2: status 0501 change 0001 [ 8.196330] ehci_hcd 0000:00:1a.7: port 1 low speed --> companion [ 8.252096] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 8.252373] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 8.308289] ehci_hcd 0000:00:1a.7: port 3 full speed --> companion [ 8.308303] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 8.308331] hub 1-0:1.0: port 3 not reset yet, waiting 50ms [ 8.364121] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 8.364345] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0008 [ 8.364425] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 8.364479] uhci_hcd 0000:00:1a.0: port 1 portsc 01a3,00 [ 8.364555] hub 2-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s [ 8.492142] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 [ 8.518681] i915 0000:00:02.0: irq 42 for MSI/MSI-X [ 8.518875] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 8.518955] [drm] Driver supports precise vblank timestamp query. [ 8.604144] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 8.717577] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 8.762165] usb 2-1: skipped 1 descriptor after interface [ 8.762196] usb 2-1: skipped 1 descriptor after interface [ 8.767129] usb 2-1: default language 0x0409 [ 8.782151] usb 2-1: udev 2, busnum 2, minor = 129 [ 8.782159] usb 2-1: New USB device found, idVendor=046d, idProduct=c521 [ 8.782236] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.782311] usb 2-1: Product: USB Receiver [ 8.782378] usb 2-1: Manufacturer: Logitech [ 8.784034] usb 2-1: usb_probe_device [ 8.784055] usb 2-1: configuration #1 chosen from 1 choice [ 8.795158] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 8.797054] usb 2-1: adding 2-1:1.1 (config #1, interface 1) [ 8.800879] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 8.800935] uhci_hcd 0000:00:1a.1: port 1 portsc 0093,00 [ 8.801016] hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 8.835323] usbhid 2-1:1.0: usb_probe_interface [ 8.835333] usbhid 2-1:1.0: usb_probe_interface - got id [ 8.853993] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1:1.0/input/input5 [ 8.859541] generic-usb 0003:046D:C521.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0 [ 8.859746] usbhid 2-1:1.1: usb_probe_interface [ 8.859753] usbhid 2-1:1.1: usb_probe_interface - got id [ 8.895174] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1:1.1/input/input6 [ 8.895402] uhci_hcd 0000:00:1a.0: reserve dev 2 ep82-INT, period 8, phase 4, 118 us [ 8.897027] usbhid 2-1:1.1: looking for a minor, starting at 96 [ 8.899794] generic-usb 0003:046D:C521.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1 [ 8.900225] usbcore: registered new interface driver usbhid [ 8.900297] usbhid: USB HID core driver [ 8.932144] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 9.044136] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 9.088428] fb0: inteldrmfb frame buffer device [ 9.088502] drm: registered panic notifier [ 9.104182] hub 3-0:1.0: port 1 not reset yet, waiting 50ms [ 9.236082] usb 3-1: ep0 maxpacket = 8 [ 9.267228] usb 3-1: default language 0x0409 [ 9.276267] usb 3-1: udev 2, busnum 3, minor = 257 [ 9.276276] usb 3-1: New USB device found, idVendor=08ff, idProduct=2810 [ 9.276352] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 9.276428] usb 3-1: Product: Fingerprint Sensor [ 9.280528] usb 3-1: usb_probe_device [ 9.280539] usb 3-1: configuration #1 chosen from 1 choice [ 9.283247] usb 3-1: adding 3-1:1.0 (config #1, interface 0) [ 9.288813] hub 4-0:1.0: state 7 ports 6 chg 0004 evt 0000 [ 9.288890] hub 4-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 9.338349] acpi device:02: registered as cooling_device2 [ 9.344349] ehci_hcd 0000:00:1d.7: port 2 full speed --> companion [ 9.344971] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 9.345002] hub 4-0:1.0: port 2 not reset yet, waiting 50ms [ 9.347607] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 9.349322] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 9.351329] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 9.351567] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 9.351681] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 [ 9.351804] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 9.351937] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 9.351947] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 9.352214] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 9.364140] uhci_hcd 0000:00:1a.2: detected 2 ports [ 9.364221] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 9.364228] uhci_hcd 0000:00:1a.2: Performing full reset [ 9.364252] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 9.364644] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0 [ 9.365532] usb usb5: default language 0x0409 [ 9.365963] usb usb5: udev 1, busnum 5, minor = 512 [ 9.365971] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.366048] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.366135] usb usb5: Product: UHCI Host Controller [ 9.366205] usb usb5: Manufacturer: Linux 2.6.38-rc6+ uhci_hcd [ 9.366277] usb usb5: SerialNumber: 0000:00:1a.2 [ 9.373485] usb usb5: usb_probe_device [ 9.373496] usb usb5: configuration #1 chosen from 1 choice [ 9.373694] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 9.376715] hub 5-0:1.0: usb_probe_interface [ 9.376723] hub 5-0:1.0: usb_probe_interface - got id [ 9.376735] hub 5-0:1.0: USB hub found [ 9.377044] hub 5-0:1.0: 2 ports detected [ 9.377155] hub 5-0:1.0: standalone hub [ 9.377161] hub 5-0:1.0: no power switching (usb 1.0) [ 9.377167] hub 5-0:1.0: individual port over-current protection [ 9.377175] hub 5-0:1.0: power on to power good time: 2ms [ 9.377423] hub 5-0:1.0: local power source is good [ 9.377471] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 9.390314] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2 [ 9.390899] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 9.391015] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 9.391101] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.391235] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 9.391246] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 9.391444] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 9.397399] uhci_hcd 0000:00:1d.0: detected 2 ports [ 9.397412] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 9.397418] uhci_hcd 0000:00:1d.0: Performing full reset [ 9.397440] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 9.397841] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0 [ 9.398692] usb usb6: default language 0x0409 [ 9.399134] usb usb6: udev 1, busnum 6, minor = 640 [ 9.399140] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.399147] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.399153] usb usb6: Product: UHCI Host Controller [ 9.399157] usb usb6: Manufacturer: Linux 2.6.38-rc6+ uhci_hcd [ 9.399162] usb usb6: SerialNumber: 0000:00:1d.0 [ 9.400215] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 9.400456] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 9.400535] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0004 [ 9.403581] usb usb6: usb_probe_device [ 9.403590] usb usb6: configuration #1 chosen from 1 choice [ 9.403796] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 9.405295] hub 6-0:1.0: usb_probe_interface [ 9.405301] hub 6-0:1.0: usb_probe_interface - got id [ 9.405311] hub 6-0:1.0: USB hub found [ 9.405569] hub 6-0:1.0: 2 ports detected [ 9.405617] hub 6-0:1.0: standalone hub [ 9.405621] hub 6-0:1.0: no power switching (usb 1.0) [ 9.405626] hub 6-0:1.0: individual port over-current protection [ 9.405632] hub 6-0:1.0: power on to power good time: 2ms [ 9.405881] hub 6-0:1.0: local power source is good [ 9.405928] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 9.410346] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 9.410686] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 9.410746] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 9.410755] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 9.410887] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 9.413791] Console: switching to colour frame buffer device 180x56 [ 9.420118] uhci_hcd 0000:00:1d.1: detected 2 ports [ 9.420131] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 9.420136] uhci_hcd 0000:00:1d.1: Performing full reset [ 9.420545] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0 [ 9.421392] usb usb7: default language 0x0409 [ 9.421812] usb usb7: udev 1, busnum 7, minor = 768 [ 9.421818] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.421825] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.421830] usb usb7: Product: UHCI Host Controller [ 9.421835] usb usb7: Manufacturer: Linux 2.6.38-rc6+ uhci_hcd [ 9.421840] usb usb7: SerialNumber: 0000:00:1d.1 [ 9.424430] usb usb7: usb_probe_device [ 9.424439] usb usb7: configuration #1 chosen from 1 choice [ 9.424643] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 9.426062] hub 7-0:1.0: usb_probe_interface [ 9.426068] hub 7-0:1.0: usb_probe_interface - got id [ 9.426078] hub 7-0:1.0: USB hub found [ 9.426341] hub 7-0:1.0: 2 ports detected [ 9.426447] hub 7-0:1.0: standalone hub [ 9.426454] hub 7-0:1.0: no power switching (usb 1.0) [ 9.426459] hub 7-0:1.0: individual port over-current protection [ 9.426467] hub 7-0:1.0: power on to power good time: 2ms [ 9.426728] hub 7-0:1.0: local power source is good [ 9.426776] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 9.431472] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 9.431774] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 9.431929] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 9.431939] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 9.432555] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 9.452078] uhci_hcd 0000:00:1d.2: detected 2 ports [ 9.452156] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 9.452162] uhci_hcd 0000:00:1d.2: Performing full reset [ 9.452279] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00 [ 9.453185] usb usb8: default language 0x0409 [ 9.453615] usb usb8: udev 1, busnum 8, minor = 896 [ 9.453622] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.453715] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.453811] usb usb8: Product: UHCI Host Controller [ 9.453879] usb usb8: Manufacturer: Linux 2.6.38-rc6+ uhci_hcd [ 9.453958] usb usb8: SerialNumber: 0000:00:1d.2 [ 9.459069] usb usb8: usb_probe_device [ 9.459077] usb usb8: configuration #1 chosen from 1 choice [ 9.459283] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 9.460822] hub 8-0:1.0: usb_probe_interface [ 9.460830] hub 8-0:1.0: usb_probe_interface - got id [ 9.460841] hub 8-0:1.0: USB hub found [ 9.464101] hub 8-0:1.0: 2 ports detected [ 9.467097] hub 8-0:1.0: standalone hub [ 9.467103] hub 8-0:1.0: no power switching (usb 1.0) [ 9.467109] hub 8-0:1.0: individual port over-current protection [ 9.467117] hub 8-0:1.0: power on to power good time: 2ms [ 9.467371] hub 8-0:1.0: local power source is good [ 9.467419] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 9.471965] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 9.476231] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 9.504195] uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00 [ 9.504221] hub 6-0:1.0: port 2: status 0101 change 0001 [ 9.524244] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 9.564359] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 9.604244] hub 6-0:1.0: state 7 ports 2 chg 0004 evt 0000 [ 9.604331] hub 6-0:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 9.720177] usb 6-2: new full speed USB device using uhci_hcd and address 2 [ 9.780168] hub 6-0:1.0: port 2 not reset yet, waiting 50ms [ 9.912160] usb 6-2: ep0 maxpacket = 8 [ 9.934223] usb 6-2: default language 0x0409 [ 9.957261] usb 6-2: udev 2, busnum 6, minor = 641 [ 9.957269] usb 6-2: New USB device found, idVendor=04b3, idProduct=301a [ 9.957276] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.957281] usb 6-2: Product: USB 1.1 2port downstream low power hub [ 9.957286] usb 6-2: Manufacturer: Lite-On Technology [ 9.959223] usb 6-2: usb_probe_device [ 9.959232] usb 6-2: configuration #1 chosen from 1 choice [ 9.973835] usb 6-2: adding 6-2:1.0 (config #1, interface 0) [ 9.977728] hub 6-2:1.0: usb_probe_interface [ 9.977734] hub 6-2:1.0: usb_probe_interface - got id [ 9.977744] hub 6-2:1.0: USB hub found [ 9.979230] hub 6-2:1.0: 3 ports detected [ 9.979271] hub 6-2:1.0: compound device; port removable status: FRR [ 9.979276] hub 6-2:1.0: individual port power switching [ 9.979280] hub 6-2:1.0: individual port over-current protection [ 9.979287] hub 6-2:1.0: power on to power good time: 44ms [ 9.980253] hub 6-2:1.0: hub controller current requirement: 100mA [ 9.980258] hub 6-2:1.0: 100mA bus power budget for each child [ 9.981748] hub 6-2:1.0: enabling power on all ports [ 10.086235] hub 6-2:1.0: port 1: status 0101 change 0001 [ 10.188158] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 128, phase 0, 12 us [ 10.188213] hub 6-2:1.0: state 7 ports 3 chg 0002 evt 0000 [ 10.190234] hub 6-2:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 10.266225] usb 6-2.1: new full speed USB device using uhci_hcd and address 3 [ 10.319434] PM: Starting manual resume from disk [ 10.368073] usb 6-2.1: ep0 maxpacket = 8 [ 10.383799] EXT3-fs: barriers not enabled [ 10.390277] usb 6-2.1: skipped 1 descriptor after interface [ 10.390308] usb 6-2.1: skipped 1 descriptor after interface [ 10.393230] usb 6-2.1: default language 0x0409 [ 10.410377] kjournald starting. Commit interval 5 seconds [ 10.410815] EXT3-fs (sda1): mounted filesystem with writeback data mode [ 10.425261] usb 6-2.1: udev 3, busnum 6, minor = 642 [ 10.425269] usb 6-2.1: New USB device found, idVendor=04b3, idProduct=301b [ 10.428395] usb 6-2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 10.431497] usb 6-2.1: Product: USB Productivity Option Keyboard( has the hub in # 1 ) [ 10.434650] usb 6-2.1: Manufacturer: Lite-On Technology [ 10.439629] usb 6-2.1: usb_probe_device [ 10.439640] usb 6-2.1: configuration #1 chosen from 1 choice [ 10.445240] usb 6-2.1: adding 6-2.1:1.0 (config #1, interface 0) [ 10.448714] usbhid 6-2.1:1.0: usb_probe_interface [ 10.448723] usbhid 6-2.1:1.0: usb_probe_interface - got id [ 10.466980] input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.0/input/input8 [ 10.470509] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 8, phase 4, 17 us [ 10.474232] generic-usb 0003:04B3:301B.0003: input,hidraw2: USB HID v1.10 Keyboard [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:1d.0-2.1/input0 [ 10.482228] usb 6-2.1: adding 6-2.1:1.1 (config #1, interface 1) [ 10.486714] usbhid 6-2.1:1.1: usb_probe_interface [ 10.486723] usbhid 6-2.1:1.1: usb_probe_interface - got id [ 10.497732] input: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.1/6-2.1:1.1/input/input9 [ 10.501624] uhci_hcd 0000:00:1d.0: reserve dev 3 ep82-INT, period 128, phase 0, 14 us [ 10.505251] generic-usb 0003:04B3:301B.0004: input,hidraw3: USB HID v1.10 Device [Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )] on usb-0000:00:1d.0-2.1/input1 [ 10.516148] hub 6-2:1.0: 356mA power budget left [ 10.516159] hub 6-2:1.0: state 7 ports 3 chg 0000 evt 0002 [ 10.568070] usb usb5: suspend_rh (auto-stop) [ 10.568111] usb usb7: suspend_rh (auto-stop) [ 10.568146] usb usb8: suspend_rh (auto-stop) [ 10.824190] hub 1-0:1.0: hub_suspend [ 10.824298] usb usb1: bus auto-suspend [ 10.824306] ehci_hcd 0000:00:1a.7: suspend root hub [ 11.808148] hub 5-0:1.0: hub_suspend [ 11.808172] usb usb5: bus auto-suspend [ 11.808180] usb usb5: suspend_rh [ 11.824112] hub 4-0:1.0: hub_suspend [ 11.824131] usb usb4: bus auto-suspend [ 11.824138] ehci_hcd 0000:00:1d.7: suspend root hub [ 11.824186] hub 7-0:1.0: hub_suspend [ 11.824200] usb usb7: bus auto-suspend [ 11.824207] usb usb7: suspend_rh [ 11.824239] hub 8-0:1.0: hub_suspend [ 11.824253] usb usb8: bus auto-suspend [ 11.824260] usb usb8: suspend_rh [ 12.882029] Adding 5791396k swap on /dev/sda5. Priority:-1 extents:1 across:5791396k [ 13.429831] EXT3-fs (sda1): using internal journal [ 13.588845] udev: starting version 147 [ 16.240668] cfg80211: Calling CRDA to update world regulatory domain [ 17.621605] cfg80211: World regulatory domain updated: [ 17.621614] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 17.621623] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.621632] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 17.621640] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 17.621647] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.621655] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.705974] ip_tables: (C) 2000-2006 Netfilter Core Team [ 20.818390] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 20.818399] iwlagn: Copyright(c) 2003-2010 Intel Corporation [ 20.819227] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 20.819245] iwlagn 0000:03:00.0: setting latency timer to 64 [ 20.819433] iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 20.841828] iwlagn 0000:03:00.0: device EEPROM VER=0x11f, CALIB=0x4 [ 20.841836] iwlagn 0000:03:00.0: Device SKU: 0Xb [ 20.842156] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 20.842799] iwlagn 0000:03:00.0: irq 43 for MSI/MSI-X [ 22.488193] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12 [ 22.582457] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 22.767132] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 22.767420] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 22.769121] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 23.993581] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 24.048229] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X [ 24.049961] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.025054] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 27.026320] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 32.208395] uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us [ 36.116665] usb usb7: usb auto-resume [ 36.116676] usb usb7: wakeup_rh [ 36.156048] hub 7-0:1.0: hub_resume [ 36.156304] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.156820] usb usb8: usb auto-resume [ 36.156829] usb usb8: wakeup_rh [ 36.196107] hub 8-0:1.0: hub_resume [ 36.197682] usb usb5: usb auto-resume [ 36.197692] usb usb5: wakeup_rh [ 36.197738] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.236171] hub 5-0:1.0: hub_resume [ 36.236422] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.236947] usb usb1: usb auto-resume [ 36.236959] ehci_hcd 0000:00:1a.7: resume root hub [ 36.292171] hub 1-0:1.0: hub_resume [ 36.292782] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 36.293188] usb usb4: usb auto-resume [ 36.293200] ehci_hcd 0000:00:1d.7: resume root hub [ 36.344140] hub 4-0:1.0: hub_resume [ 36.344773] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 37.320058] eth0: no IPv6 routers present [ 37.352117] usb usb7: suspend_rh (auto-stop) [ 37.352157] usb usb5: suspend_rh (auto-stop) [ 37.356042] usb usb8: suspend_rh (auto-stop) [ 39.924055] hub 5-0:1.0: hub_suspend [ 39.924081] usb usb5: bus auto-suspend [ 39.924089] usb usb5: suspend_rh [ 39.924122] hub 1-0:1.0: hub_suspend [ 39.924136] usb usb1: bus auto-suspend [ 39.924143] ehci_hcd 0000:00:1a.7: suspend root hub [ 39.924190] hub 4-0:1.0: hub_suspend [ 39.924203] usb usb4: bus auto-suspend [ 39.924209] ehci_hcd 0000:00:1d.7: suspend root hub [ 39.924254] hub 7-0:1.0: hub_suspend [ 39.924267] usb usb7: bus auto-suspend [ 39.924273] usb usb7: suspend_rh [ 39.924303] hub 8-0:1.0: hub_suspend [ 39.924316] usb usb8: bus auto-suspend [ 39.924322] usb usb8: suspend_rh [ 114.778041] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) [ 186.437090] irq 23: nobody cared (try booting with the "irqpoll" option) [ 186.437103] Pid: 0, comm: swapper Not tainted 2.6.38-rc6+ #763 [ 186.437109] Call Trace: [ 186.437115] [] ? __report_bad_irq+0x26/0xa0 [ 186.437139] [] ? note_interrupt+0x18c/0x1d0 [ 186.437150] [] ? handle_fasteoi_irq+0xcd/0x100 [ 186.437161] [] ? handle_irq+0x1d/0x30 [ 186.437169] [] ? do_IRQ+0x58/0xd0 [ 186.437180] [] ? ret_from_intr+0x0/0xe [ 186.437185] [] ? native_sched_clock+0x27/0x80 [ 186.437206] [] ? acpi_idle_enter_simple+0xbe/0xf0 [ 186.437216] [] ? acpi_idle_enter_simple+0xb9/0xf0 [ 186.437226] [] ? cpuidle_idle_call+0x82/0xf0 [ 186.437236] [] ? cpu_idle+0x56/0xb0 [ 186.437247] [] ? rest_init+0xcb/0xe0 [ 186.437256] [] ? rest_init+0x0/0xe0 [ 186.437267] [] ? start_kernel+0x38a/0x395 [ 186.437277] [] ? x86_64_start_reservations+0x131/0x135 [ 186.437286] [] ? x86_64_start_kernel+0xf2/0xf9 [ 186.437292] handlers: [ 186.437296] [] (usb_hcd_irq+0x0/0x70 [usbcore]) [ 186.437326] Disabling IRQ #23