| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1299512600-29047-6-git-send-email-haojian.zhuang@marvell.com>
Date: Mon, 7 Mar 2011 23:43:14 +0800
From: Haojian Zhuang <haojian.zhuang@...vell.com>
To: johnpol@....mipt.ru, sameo@...ux.intel.com, a.zummo@...ertech.it,
lrg@...mlogic.co.uk, broonie@...nsource.wolfsonmicro.com,
dmitry.torokhov@...il.com, dtor@...l.ru, rpurdie@...ys.net,
linux-kernel@...r.kernel.org
Cc: Haojian Zhuang <haojian.zhuang@...vell.com>
Subject: [PATCH] input: touchscreen: use polling mode in 88pm860x
Measuring point on touchscreen with IRQ mode can only monitor pen-down
event. If finger is moving on touchscreen, it can't be monitored by
IRQ pen-down event. So switch to polling mode after pen-down event.
Signed-off-by: Haojian Zhuang <haojian.zhuang@...vell.com>
---
drivers/input/touchscreen/88pm860x-ts.c | 77 +++++++++++++++++++++++-------
1 files changed, 59 insertions(+), 18 deletions(-)
diff --git a/drivers/input/touchscreen/88pm860x-ts.c b/drivers/input/touchscreen/88pm860x-ts.c
index b3aebc2..7d481cc 100644
--- a/drivers/input/touchscreen/88pm860x-ts.c
+++ b/drivers/input/touchscreen/88pm860x-ts.c
@@ -19,6 +19,18 @@
#define MEAS_LEN (8)
#define ACCURATE_BIT (12)
+/*
+ * While 32KHz hardware timer is used for scheduler, we always assign HZ
+ * to 128. It means that 1 tick costs 7.8msec.
+ */
+#define MEASURE_INTERVAL_MS (7)
+
+/* debounce register */
+#define DEBOUNCE (0x0A)
+
+#define PD_DEBOUNCE_0MSEC (0)
+#define PD_DEBOUNCE_MASK (3)
+
/* touch register */
#define MEAS_EN3 (0x52)
@@ -39,22 +51,26 @@
#define MEAS_TSIZ2_EN (1 << 7)
struct pm860x_touch {
- struct input_dev *idev;
- struct i2c_client *i2c;
- struct pm860x_chip *chip;
- int irq;
- int res_x; /* resistor of Xplate */
+ struct input_dev *idev;
+ struct i2c_client *i2c;
+ struct pm860x_chip *chip;
+ struct delayed_work poll_work;
+
+ int irq;
+ int res_x; /* resistor of Xplate */
};
-static irqreturn_t pm860x_touch_handler(int irq, void *data)
+static void pm860x_poll_work(struct work_struct *work)
{
- struct pm860x_touch *touch = data;
+ struct pm860x_touch *touch = container_of(work, struct pm860x_touch,
+ poll_work.work);
struct pm860x_chip *chip = touch->chip;
+ int x, y, z1, z2, rt = 0;
+ int ret, pen_down, interval;
unsigned char buf[MEAS_LEN];
- int x, y, pen_down;
- int z1, z2, rt = 0;
- int ret;
+ struct timeval start, end;
+ do_gettimeofday(&start);
ret = pm860x_bulk_read(touch->i2c, MEAS_TSIX_1, MEAS_LEN, buf);
if (ret < 0)
goto out;
@@ -77,6 +93,15 @@ static irqreturn_t pm860x_touch_handler(int irq, void *data)
input_report_abs(touch->idev, ABS_PRESSURE, rt);
input_report_key(touch->idev, BTN_TOUCH, 1);
dev_dbg(chip->dev, "pen down at [%d, %d].\n", x, y);
+
+ do_gettimeofday(&end);
+ interval = (end.tv_sec - start.tv_sec) * 1000000 +
+ (end.tv_usec - start.tv_usec) / 1000;
+ interval = (interval < MEASURE_INTERVAL_MS)
+ ? (MEASURE_INTERVAL_MS - interval) : 0;
+ queue_delayed_work(touch->chip->monitor_wqueue,
+ &touch->poll_work,
+ msecs_to_jiffies(interval));
} else {
input_report_abs(touch->idev, ABS_PRESSURE, 0);
input_report_key(touch->idev, BTN_TOUCH, 0);
@@ -85,22 +110,36 @@ static irqreturn_t pm860x_touch_handler(int irq, void *data)
input_sync(touch->idev);
out:
+ return;
+}
+
+static irqreturn_t pm860x_touch_handler(int irq, void *data)
+{
+ struct pm860x_touch *touch = data;
+ int ret;
+
+ ret = pm860x_reg_read(touch->i2c, PM8607_STATUS_1);
+ dev_dbg(touch->chip->dev, "pen status:%d\n", (ret & PM8607_STATUS_PEN)
+ ? 1 : 0);
+ if ((ret & PM8607_STATUS_PEN) == 0)
+ return IRQ_HANDLED;
+
+ pm860x_poll_work(&touch->poll_work.work);
return IRQ_HANDLED;
}
static int pm860x_touch_open(struct input_dev *dev)
{
struct pm860x_touch *touch = input_get_drvdata(dev);
- int data, ret;
+ int data;
+ /* set debounce time with 0ms */
+ pm860x_set_bits(touch->i2c, DEBOUNCE, PD_DEBOUNCE_MASK,
+ PD_DEBOUNCE_0MSEC);
data = MEAS_PD_EN | MEAS_TSIX_EN | MEAS_TSIY_EN
| MEAS_TSIZ1_EN | MEAS_TSIZ2_EN;
- ret = pm860x_set_bits(touch->i2c, MEAS_EN3, data, data);
- if (ret < 0)
- goto out;
+ pm860x_set_bits(touch->i2c, MEAS_EN3, data, data);
return 0;
-out:
- return ret;
}
static void pm860x_touch_close(struct input_dev *dev)
@@ -152,14 +191,14 @@ static int __devinit pm860x_touch_probe(struct platform_device *pdev)
}
touch->idev->name = "88pm860x-touch";
- touch->idev->phys = "88pm860x/input0";
+ touch->idev->phys = "88pm860x/input1";
touch->idev->id.bustype = BUS_I2C;
touch->idev->dev.parent = &pdev->dev;
touch->idev->open = pm860x_touch_open;
touch->idev->close = pm860x_touch_close;
touch->chip = chip;
touch->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
- touch->irq = irq + chip->irq_base;
+ touch->irq = irq;
touch->res_x = pdata->res_x;
input_set_drvdata(touch->idev, touch);
@@ -188,6 +227,7 @@ static int __devinit pm860x_touch_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, touch);
+ INIT_DELAYED_WORK(&touch->poll_work, pm860x_poll_work);
return 0;
out_rg:
free_irq(touch->irq, touch);
@@ -202,6 +242,7 @@ static int __devexit pm860x_touch_remove(struct platform_device *pdev)
{
struct pm860x_touch *touch = platform_get_drvdata(pdev);
+ flush_workqueue(touch->chip->monitor_wqueue);
input_unregister_device(touch->idev);
free_irq(touch->irq, touch);
platform_set_drvdata(pdev, NULL);
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists