| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1299879513-14884-3-git-send-email-dagenaisj@sonatest.com>
Date: Fri, 11 Mar 2011 16:38:32 -0500
From: "Jean-François Dagenais" <jeff.dagenais@...il.com>
To: linux-kernel@...r.kernel.org
Cc: johnpol@....mipt.ru,
Jean-François Dagenais <dagenaisj@...atest.com>
Subject: [w1 PATCHES 2/3] Add 1-wire (w1) DS2408 8-Channel Addressable Switch support
This DS2408 w1 slave driver is not complete for all the
features of the chip, but its sufficient if you use it as
a simple IO expander.
Signed-off-by: Jean-François Dagenais <dagenaisj@...atest.com>
---
:100644 100644 f0c9096... cd1b724... M drivers/w1/slaves/Kconfig
:100644 100644 3c76350... 75e3913... M drivers/w1/slaves/Makefile
:000000 100644 0000000... 3547e80... A drivers/w1/slaves/w1_ds2408.c
:100644 100644 f3b636d... 7513759... M drivers/w1/w1_family.h
drivers/w1/slaves/Kconfig | 7 +
drivers/w1/slaves/Makefile | 1 +
drivers/w1/slaves/w1_ds2408.c | 402 +++++++++++++++++++++++++++++++++++++++++
drivers/w1/w1_family.h | 1 +
4 files changed, 411 insertions(+), 0 deletions(-)
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index f0c9096..cd1b724 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -16,6 +16,13 @@ config W1_SLAVE_SMEM
Say Y here if you want to connect 1-wire
simple 64bit memory rom(ds2401/ds2411/ds1990*) to your wire.
+config W1_SLAVE_DS2408
+ tristate "8-Channel Addressable Switch (IO Expander) 0x29 family support (DS2408)"
+ help
+ Say Y here if you want to use a 1-wire
+
+ DS2408 8-Channel Addressable Switch device support
+
config W1_SLAVE_DS2423
tristate "Counter 1-wire device (DS2423)"
select CRC16
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
index 3c76350..75e3913 100644
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o
obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o
+obj-$(CONFIG_W1_SLAVE_DS2408) += w1_ds2408.o
obj-$(CONFIG_W1_SLAVE_DS2423) += w1_ds2423.o
obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o
obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o
diff --git a/drivers/w1/slaves/w1_ds2408.c b/drivers/w1/slaves/w1_ds2408.c
new file mode 100644
index 0000000..3547e80
--- /dev/null
+++ b/drivers/w1/slaves/w1_ds2408.c
@@ -0,0 +1,402 @@
+/*
+ * w1_ds2408.c - w1 family 29 (DS2408) driver
+ *
+ * Copyright (c) 2010 Jean-Francois Dagenais <dagenaisj@...atest.com>
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+#include "../w1_family.h"
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jean-Francois Dagenais <dagenaisj@...atest.com>");
+MODULE_DESCRIPTION("w1 family 29 driver for DS2408 8 Pin IO");
+
+
+#define W1_F29_RETRIES 3
+
+#define W1_F29_REG_LOGIG_STATE 0x88 /* R */
+#define W1_F29_REG_OUTPUT_LATCH_STATE 0x89 /* R */
+#define W1_F29_REG_ACTIVITY_LATCH_STATE 0x8A /* R */
+#define W1_F29_REG_COND_SEARCH_SELECT_MASK 0x8B /* RW */
+#define W1_F29_REG_COND_SEARCH_POL_SELECT 0x8C /* RW */
+#define W1_F29_REG_CONTROL_AND_STATUS 0x8D /* RW */
+
+#define W1_F29_FUNC_READ_PIO_REGS 0xF0
+#define W1_F29_FUNC_CHANN_ACCESS_READ 0xF5
+#define W1_F29_FUNC_CHANN_ACCESS_WRITE 0x5A
+/* also used to write the control/status reg (0x8D): */
+#define W1_F29_FUNC_WRITE_COND_SEARCH_REG 0xCC
+#define W1_F29_FUNC_RESET_ACTIVITY_LATCHES 0xC3
+
+#define W1_F29_SUCCESS_CONFIRM_BYTE 0xAA
+
+static int _read_reg(struct w1_slave *sl, u8 address, unsigned char* buf)
+{
+ u8 wrbuf[3];
+ dev_dbg(&sl->dev,
+ "Reading with slave: %p, reg addr: %0#4x, buff addr: %p",
+ sl, (unsigned int)address, buf);
+
+ if (!buf)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->mutex);
+ dev_dbg(&sl->dev, "mutex locked");
+
+ if (w1_reset_select_slave(sl)) {
+ mutex_unlock(&sl->master->mutex);
+ return -EIO;
+ }
+
+ wrbuf[0] = W1_F29_FUNC_READ_PIO_REGS;
+ wrbuf[1] = address;
+ wrbuf[2] = 0;
+ w1_write_block(sl->master, wrbuf, 3);
+ *buf = w1_read_8(sl->master);
+
+ mutex_unlock(&sl->master->mutex);
+ dev_dbg(&sl->dev, "mutex unlocked");
+ return 1;
+}
+
+static ssize_t w1_f29_read_state(
+ struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ dev_dbg(&kobj_to_w1_slave(kobj)->dev,
+ "Reading %s kobj: %p, off: %0#10x, count: %lu, buff addr: %p",
+ bin_attr->attr.name, kobj, (unsigned int)off, count, buf);
+ if (count != 1 || off != 0)
+ return -EFAULT;
+ return _read_reg(kobj_to_w1_slave(kobj), W1_F29_REG_LOGIG_STATE, buf);
+}
+
+static ssize_t w1_f29_read_output(
+ struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ dev_dbg(&kobj_to_w1_slave(kobj)->dev,
+ "Reading %s kobj: %p, off: %0#10x, count: %lu, buff addr: %p",
+ bin_attr->attr.name, kobj, (unsigned int)off, count, buf);
+ if (count != 1 || off != 0)
+ return -EFAULT;
+ return _read_reg(kobj_to_w1_slave(kobj),
+ W1_F29_REG_OUTPUT_LATCH_STATE, buf);
+}
+
+static ssize_t w1_f29_read_activity(
+ struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ dev_dbg(&kobj_to_w1_slave(kobj)->dev,
+ "Reading %s kobj: %p, off: %0#10x, count: %lu, buff addr: %p",
+ bin_attr->attr.name, kobj, (unsigned int)off, count, buf);
+ if (count != 1 || off != 0)
+ return -EFAULT;
+ return _read_reg(kobj_to_w1_slave(kobj),
+ W1_F29_REG_ACTIVITY_LATCH_STATE, buf);
+}
+
+static ssize_t w1_f29_read_cond_search_mask(
+ struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ dev_dbg(&kobj_to_w1_slave(kobj)->dev,
+ "Reading %s kobj: %p, off: %0#10x, count: %lu, buff addr: %p",
+ bin_attr->attr.name, kobj, (unsigned int)off, count, buf);
+ if (count != 1 || off != 0)
+ return -EFAULT;
+ return _read_reg(kobj_to_w1_slave(kobj),
+ W1_F29_REG_COND_SEARCH_SELECT_MASK, buf);
+}
+
+static ssize_t w1_f29_read_cond_search_polarity(
+ struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ if (count != 1 || off != 0)
+ return -EFAULT;
+ return _read_reg(kobj_to_w1_slave(kobj),
+ W1_F29_REG_COND_SEARCH_POL_SELECT, buf);
+}
+
+static ssize_t w1_f29_read_status_control(
+ struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ if (count != 1 || off != 0)
+ return -EFAULT;
+ return _read_reg(kobj_to_w1_slave(kobj),
+ W1_F29_REG_CONTROL_AND_STATUS, buf);
+}
+
+
+
+
+static ssize_t w1_f29_write_output(
+ struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct w1_slave *sl = kobj_to_w1_slave(kobj);
+ u8 w1_buf[3];
+ u8 readBack;
+ unsigned int retries = W1_F29_RETRIES;
+
+ if (count != 1 || off != 0)
+ return -EFAULT;
+
+ dev_dbg(&sl->dev, "locking mutex for write_output");
+ mutex_lock(&sl->master->mutex);
+ dev_dbg(&sl->dev, "mutex locked");
+
+ if (w1_reset_select_slave(sl))
+ goto error;
+
+ while (retries--) {
+ w1_buf[0] = W1_F29_FUNC_CHANN_ACCESS_WRITE;
+ w1_buf[1] = *buf;
+ w1_buf[2] = ~(*buf);
+ w1_write_block(sl->master, w1_buf, 3);
+
+ readBack = w1_read_8(sl->master);
+ /* here the master could read another byte which
+ would be the PIO reg (the actual pin logic state)
+ since in this driver we don't know which pins are
+ in and outs, there's no value to read the state and
+ compare. with (*buf) so end this command abruptly: */
+ if (w1_reset_resume_command(sl->master))
+ goto error;
+
+ if (readBack != 0xAA) {
+ /* try again, the slave is ready for a command */
+ continue;
+ }
+
+ /* go read back the output latches */
+ /* (the direct effect of the write above) */
+ w1_buf[0] = W1_F29_FUNC_READ_PIO_REGS;
+ w1_buf[1] = W1_F29_REG_OUTPUT_LATCH_STATE;
+ w1_buf[2] = 0;
+ w1_write_block(sl->master, w1_buf, 3);
+ /* read the result of the READ_PIO_REGS command */
+ if (w1_read_8(sl->master) == *buf) {
+ /* success! */
+ mutex_unlock(&sl->master->mutex);
+ dev_dbg(&sl->dev,
+ "mutex unlocked, retries:%d", retries);
+ return 1;
+ }
+ }
+error:
+ mutex_unlock(&sl->master->mutex);
+ dev_dbg(&sl->dev, "mutex unlocked in error, retries:%d", retries);
+
+ return -EIO;
+}
+
+
+/**
+ * Writing to the activity file resets the activity latches.
+ */
+static ssize_t w1_f29_write_activity(
+ struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct w1_slave *sl = kobj_to_w1_slave(kobj);
+ unsigned int retries = W1_F29_RETRIES;
+
+ if (count != 1 || off != 0)
+ return -EFAULT;
+
+ mutex_lock(&sl->master->mutex);
+
+ if (w1_reset_select_slave(sl))
+ goto error;
+
+ while (retries--) {
+ w1_write_8(sl->master, W1_F29_FUNC_RESET_ACTIVITY_LATCHES);
+ if (w1_read_8(sl->master) == W1_F29_SUCCESS_CONFIRM_BYTE) {
+ mutex_unlock(&sl->master->mutex);
+ return 1;
+ }
+ if (w1_reset_resume_command(sl->master))
+ goto error;
+ }
+
+error:
+ mutex_unlock(&sl->master->mutex);
+ return -EIO;
+}
+
+static ssize_t w1_f29_write_status_control(
+ struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf,
+ loff_t off,
+ size_t count)
+{
+ struct w1_slave *sl = kobj_to_w1_slave(kobj);
+ u8 w1_buf[4];
+ unsigned int retries = W1_F29_RETRIES;
+
+ if (count != 1 || off != 0)
+ return -EFAULT;
+
+ mutex_lock(&sl->master->mutex);
+
+ if (w1_reset_select_slave(sl))
+ goto error;
+
+ while (retries--) {
+ w1_buf[0] = W1_F29_FUNC_WRITE_COND_SEARCH_REG;
+ w1_buf[1] = W1_F29_REG_CONTROL_AND_STATUS;
+ w1_buf[2] = 0;
+ w1_buf[3] = *buf;
+
+ w1_write_block(sl->master, w1_buf, 4);
+ if (w1_reset_resume_command(sl->master))
+ goto error;
+
+ w1_buf[0] = W1_F29_FUNC_READ_PIO_REGS;
+ w1_buf[1] = W1_F29_REG_CONTROL_AND_STATUS;
+ w1_buf[2] = 0;
+
+ w1_write_block(sl->master, w1_buf, 3);
+ if (w1_read_8(sl->master) == *buf) {
+ /* success! */
+ mutex_unlock(&sl->master->mutex);
+ return 1;
+ }
+ }
+error:
+ mutex_unlock(&sl->master->mutex);
+
+ return -EIO;
+}
+
+
+
+#define NB_SYSFS_BIN_FILES 6
+static struct bin_attribute w1_f29_sysfs_bin_files[NB_SYSFS_BIN_FILES] = {
+ {
+ .attr = {
+ .name = "state",
+ .mode = S_IRUGO,
+ },
+ .size = 1,
+ .read = w1_f29_read_state,
+ },
+ {
+ .attr = {
+ .name = "output",
+ .mode = S_IRUGO | S_IWUSR | S_IWGRP,
+ },
+ .size = 1,
+ .read = w1_f29_read_output,
+ .write = w1_f29_write_output,
+ },
+ {
+ .attr = {
+ .name = "activity",
+ .mode = S_IRUGO,
+ },
+ .size = 1,
+ .read = w1_f29_read_activity,
+ .write = w1_f29_write_activity,
+ },
+ {
+ .attr = {
+ .name = "cond_search_mask",
+ .mode = S_IRUGO,
+ },
+ .size = 1,
+ .read = w1_f29_read_cond_search_mask,
+ .write = 0,
+ },
+ {
+ .attr = {
+ .name = "cond_search_polarity",
+ .mode = S_IRUGO,
+ },
+ .size = 1,
+ .read = w1_f29_read_cond_search_polarity,
+ .write = 0,
+ },
+ {
+ .attr = {
+ .name = "status_control",
+ .mode = S_IRUGO | S_IWUSR | S_IWGRP,
+ },
+ .size = 1,
+ .read = w1_f29_read_status_control,
+ .write = w1_f29_write_status_control,
+ }
+};
+
+static int w1_f29_add_slave(struct w1_slave *sl)
+{
+ int err = 0;
+ int i;
+
+ for (i = 0; i < NB_SYSFS_BIN_FILES && !err; ++i)
+ err = sysfs_create_bin_file(
+ &sl->dev.kobj,
+ &(w1_f29_sysfs_bin_files[i]));
+ if (err)
+ while (--i >= 0)
+ sysfs_remove_bin_file(&sl->dev.kobj,
+ &(w1_f29_sysfs_bin_files[i]));
+ return err;
+}
+
+static void w1_f29_remove_slave(struct w1_slave *sl)
+{
+ int i;
+ for (i = NB_SYSFS_BIN_FILES; i <= 0; --i)
+ sysfs_remove_bin_file(&sl->dev.kobj,
+ &(w1_f29_sysfs_bin_files[i]));
+}
+
+static struct w1_family_ops w1_f29_fops = {
+ .add_slave = w1_f29_add_slave,
+ .remove_slave = w1_f29_remove_slave,
+};
+
+static struct w1_family w1_family_29 = {
+ .fid = W1_FAMILY_DS2408,
+ .fops = &w1_f29_fops,
+};
+
+static int __init w1_f29_init(void)
+{
+ return w1_register_family(&w1_family_29);
+}
+
+static void __exit w1_f29_exit(void)
+{
+ w1_unregister_family(&w1_family_29);
+}
+
+module_init(w1_f29_init);
+module_exit(w1_f29_exit);
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h
index f3b636d..7513759 100644
--- a/drivers/w1/w1_family.h
+++ b/drivers/w1/w1_family.h
@@ -34,6 +34,7 @@
#define W1_THERM_DS1822 0x22
#define W1_EEPROM_DS2433 0x23
#define W1_THERM_DS18B20 0x28
+#define W1_FAMILY_DS2408 0x29
#define W1_EEPROM_DS2431 0x2D
#define W1_FAMILY_DS2760 0x30
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists