[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1300461684-21775-3-git-send-email-Dinh.Nguyen@freescale.com>
Date: Fri, 18 Mar 2011 10:21:24 -0500
From: <Dinh.Nguyen@...escale.com>
To: <linux-kernel@...r.kernel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <linux@....linux.org.uk>,
<s.hauer@...gutronix.de>, <u.kleine-koenig@...gutronix.de>,
<arnaud.patard@...-net.org>, <ra5478@...escale.com>,
<xiao-lizhang@...escale.com>, <festevam@...il.com>,
Dinh Nguyen <Dinh.Nguyen@...escale.com>
Subject: [PATCHv4 3/3] ARM: mx51: Add support for low power suspend on MX51
From: Dinh Nguyen <Dinh.Nguyen@...escale.com>
Adds initial low power suspend functionality to MX51.
Supports "mem" and "standby" modes.
Tested on mx51-babbage.
Signed-off-by: Dinh Nguyen <Dinh.Nguyen@...escale.com>
---
arch/arm/mach-mx5/Makefile | 1 +
arch/arm/mach-mx5/pm-imx51.c | 74 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 75 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-mx5/pm-imx51.c
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 0b9338c..787cb80 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -6,6 +6,7 @@
obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o
obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
+obj-$(CONFIG_PM) += pm-imx51.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
diff --git a/arch/arm/mach-mx5/pm-imx51.c b/arch/arm/mach-mx5/pm-imx51.c
new file mode 100644
index 0000000..49186e3
--- /dev/null
+++ b/arch/arm/mach-mx5/pm-imx51.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/suspend.h>
+#include <linux/clk.h>
+#include <asm/mach/map.h>
+#include <asm/cacheflush.h>
+#include <asm/tlb.h>
+#include <mach/system.h>
+#include "crm_regs.h"
+
+static struct clk *gpc_dvfs_clk;
+
+static int mx5_suspend_enter(suspend_state_t state)
+{
+ if (gpc_dvfs_clk == NULL)
+ gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+
+ if (gpc_dvfs_clk) {
+ clk_enable(gpc_dvfs_clk);
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ mx5_cpu_lp_set(STOP_POWER_OFF);
+ break;
+ case PM_SUSPEND_STANDBY:
+ mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (state == PM_SUSPEND_MEM) {
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ /*clear the EMPGC0/1 bits */
+ __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
+ __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
+ }
+ cpu_do_idle();
+ clk_disable(gpc_dvfs_clk);
+ }else {
+ printk(KERN_ERR "Cannot enter SRPG suspend -no gpc_dvfs clock!\n");
+ return -EPERM;
+ }
+
+ return 0;
+}
+
+static int mx5_pm_valid(suspend_state_t state)
+{
+ return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
+}
+
+static const struct platform_suspend_ops mx5_suspend_ops = {
+ .valid = mx5_pm_valid,
+ .enter = mx5_suspend_enter,
+};
+
+static int __init mx5_pm_init(void)
+{
+ if (cpu_is_mx51())
+ suspend_set_ops(&mx5_suspend_ops);
+
+ return 0;
+}
+device_initcall(mx5_pm_init);
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists