| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <AANLkTimDDpCHf7Cpjt5mi=d18OpX2Q4yiwNDK_26j0kD@mail.gmail.com>
Date: Fri, 18 Mar 2011 18:22:33 +0300
From: "vooon341@...il.com" <vooon341@...il.com>
To: Wolfram Sang <w.sang@...gutronix.de>,
linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/4,v3] powerpc/mpc512x: Add initial support for TWR-MPC5125
commit 3b94215206569d5c2bad20397cebfa9570c921bc
Author: Ermakov Vladimir <ermakov@...on.ru>
Date: Thu Mar 17 11:10:49 2011 +0300
Adds Freescale TWR-MPC5125 device tree and platform code.
Currently following is supported:
- NAND
- FEC1 and FEC2
- RTC
- PSC UART
Signed-off-by: Vladimir Ermakov <vooon341@...il.com>
---
v2:
- add PSC compat string selection
- add ioctl defines
v3:
- less verbose interrupt-parent
- move mpc512x_select_psc_compat() to mpc512x_shared.c
- remove unneded mpc5125_psc_iopad_init()
- fix board prefixes
diff --git a/arch/powerpc/boot/dts/mpc5125twr.dts
b/arch/powerpc/boot/dts/mpc5125twr.dts
new file mode 100644
index 0000000..d899f92
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc5125twr.dts
@@ -0,0 +1,368 @@
+/*
+ * STx/Freescale ADS5125 MPC5125 silicon
+ *
+ * Copyright (C) 2009 Freescale Semiconductor Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "mpc5125twr"; // In BSP "mpc5125ads"
+ compatible = "fsl,mpc5125ads";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&ipic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5125@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <0x20>; // 32 bytes
+ i-cache-line-size = <0x20>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
+ timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
+ bus-frequency = <198000000>; // 198 MHz csb bus
+ clock-frequency = <396000000>; // 396 MHz ppc core
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; // 256MB at 0
+ };
+
+ sram@...00000 {
+ compatible = "fsl,mpc5121-sram";
+ reg = <0x30000000 0x08000>; // 32K at 0x30000000
+ };
+
+ nfc@...00000 {
+ compatible = "fsl,mpc5125-nfc";
+ reg = <0x40000000 0x100000>; // 1M at 0x40000000
+ interrupts = <6 0x8>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <1>;
+ write-size = <4096>;
+ spare-size = <128>;
+ chips = <1>;
+ // NOTE: partition map different than in BSP
+ // First three is the same as in BSP, other differ.
+ nand-spl@0 {
+ label = "loader";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+ uboot@...000 {
+ label = "uboot";
+ reg = <0x00100000 0x00100000>;
+ read-only;
+ };
+ uboot-env@...000 {
+ label = "uboot-env";
+ reg = <0x00200000 0x00100000>;
+ read-only;
+ };
+ kernel@...000 {
+ label = "kernel";
+ reg = <0x00300000 0x00800000>;
+ };
+ device-tree@...000 {
+ label = "device-tree";
+ reg = <0x00b00000 0x00100000>;
+ };
+ ramboot-rootfs@...000 {
+ label = "ramboot-rootfs";
+ reg = <0x00c00000 0x00800000>;
+ };
+ rootfs@...0000 {
+ label = "rootfs";
+ reg = <0x01400000 0x01400000>;
+ };
+ user@...0000 {
+ label = "user";
+ reg = <0x02800000 0x01400000>;
+ };
+ SRAM@...0000 {
+ label = "SRAM"; // NVRAM emul
+ reg = <0x04200000 0x01400000>;
+ };
+ prom@...0000 {
+ label = "prom";
+ reg = <0x05600000 0x01400000>;
+ };
+ //data@...0000 {
+ // label = "data";
+ // reg = <0x28000000 0xeac00000>;
+ //};
+ };
+
+ soc@...00000 {
+ compatible = "fsl,mpc5121-immr";
+ device_type = "soc";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ ranges = <0x0 0x80000000 0x400000>;
+ reg = <0x80000000 0x400000>;
+ bus-frequency = <66000000>; // 66 MHz ips bus
+
+ // IPIC
+ // interrupts cell = <intr #, sense>
+ // sense values match linux IORESOURCE_IRQ_* defines:
+ // sense == 8: Level, low assertion
+ // sense == 2: Edge, high-to-low change
+ //
+ ipic: interrupt-controller@c00 {
+ compatible = "fsl,mpc5121-ipic", "fsl,ipic";
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0xc00 0x100>;
+ };
+
+ rtc@a00 { // Real time clock
+ compatible = "fsl,mpc5121-rtc";
+ reg = <0xa00 0x100>;
+ interrupts = <79 0x8 80 0x8>;
+ };
+
+ reset@e00 { // Reset module
+ compatible = "fsl,mpc5121-reset";
+ reg = <0xe00 0x100>;
+ };
+
+ clock@f00 { // Clock control
+ compatible = "fsl,mpc5121rev2-clock", "fsl,mpc5121-clock";
+ reg = <0xf00 0x100>;
+ };
+
+ pmc@...0{ // Power Management Controller
+ compatible = "fsl,mpc5121-pmc";
+ reg = <0x1000 0x100>;
+ interrupts = <83 0x2>;
+ };
+
+ gpio@...0 {
+ compatible = "fsl,mpc5125-gpio";
+ cell-index = <0>;
+ reg = <0x1100 0x080>;
+ interrupts = <78 0x8>;
+ };
+
+ gpio@...0 {
+ compatible = "fsl,mpc5125-gpio1";
+ cell-index = <1>;
+ reg = <0x1180 0x080>;
+ interrupts = <78 0x8>;
+ };
+
+ can@...0 { // CAN rev.2
+ compatible = "fsl,mpc5121-mscan";
+ cell-index = <0>;
+ interrupts = <12 0x8>;
+ reg = <0x1300 0x80>;
+ };
+
+ can@...0 {
+ compatible = "fsl,mpc5121-mscan";
+ cell-index = <1>;
+ interrupts = <13 0x8>;
+ reg = <0x1380 0x80>;
+ };
+
+ sdhc@...0 {
+ compatible = "fsl,mpc5125-sdhc";
+ interrupts = <8 0x8>;
+ reg = <0x1500 0x100>;
+ };
+
+ i2c@...0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-i2c";
+ cell-index = <0>;
+ reg = <0x1700 0x20>;
+ interrupts = <0x9 0x8>;
+ fsl5200-clocking;
+ };
+
+ i2c@...0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-i2c";
+ cell-index = <1>;
+ reg = <0x1720 0x20>;
+ interrupts = <0xa 0x8>;
+ fsl5200-clocking;
+ };
+
+ i2c@...0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-i2c";
+ cell-index = <2>;
+ reg = <0x1740 0x20>;
+ interrupts = <0xb 0x8>;
+ fsl5200-clocking;
+ };
+
+ i2ccontrol@...0 {
+ compatible = "fsl,mpc5121-i2c-ctrl";
+ reg = <0x1760 0x8>;
+ };
+
+ //diu@...0 {
+ // device_type = "display";
+ // compatible = "fsl-diu";
+ // reg = <0x2100 0x100>;
+ // interrupts = <64 0x8>;
+ //};
+
+ // MPC5125e has two more CAN ports
+ // but they are not used on ADS5125
+ //can@...0 {
+ // compatible = "fsl,mpc5121-mscan";
+ // cell-index = <2>;
+ // interrupts = <90 0x8>;
+ // reg = <0x2300 0x80>;
+ //};
+
+ //can@...0 {
+ // compatible = "fsl,mpc5121-mscan";
+ // cell-index = <3>;
+ // interrupts = <91 0x8>;
+ // reg = <0x2380 0x80>;
+ //};
+
+ mdio@...0 {
+ compatible = "fsl,mpc5121-fec-mdio";
+ reg = <0x2800 0x800>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@0 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@...0 {
+ compatible = "fsl,mpc5121-fec";
+ reg = <0x2800 0x800>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <4 0x8>;
+ phy-handle = < &phy0 >;
+ };
+
+ // USB ULPI1
+ //usb@...0 {
+ // device_type = "usb";
+ // compatible = "fsl-usb2-dr";
+ // reg = <0x3000 0x400>;
+ // #address-cells = <1>;
+ // #size-cells = <0>;
+ // interrupts = <43 0x8>;
+ // dr_mode = "host";
+ // phy_type = "ulpi";
+ // big-endian-regs;
+ //};
+
+ // USB ULPI2
+ //usb@...0 {
+ // device_type = "usb";
+ // compatible = "fsl-usb2-dr";
+ // reg = <0x4000 0x400>;
+ // #address-cells = <1>;
+ // #size-cells = <0>;
+ // interrupts = <44 0x8>;
+ // dr_mode = "otg";
+ // phy_type = "ulpi";
+ // big-endian-regs;
+ //};
+
+ mdio@...0 {
+ compatible = "fsl,mpc5121-fec-mdio";
+ reg = <0x4800 0x800>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy1: ethernet-phy@0 {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ ethernet@...0 {
+ compatible = "fsl,mpc5121-fec";
+ reg = <0x4800 0x800>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <5 0x8>;
+ phy-handle = < &phy1 >;
+ };
+
+ // IO control
+ ioctl@...0 {
+ compatible = "fsl,mpc5125-ioctl";
+ reg = <0xA000 0x1000>;
+ };
+
+ // PSC0 in ac97 mode
+ //ac97@...00 {
+ // device_type = "sound";
+ // compatible = "fsl,mpc5125-psc-ac97", "fsl,mpc5125-psc";
+ // cell-index = <0>;
+ // reg = <0x11000 0x100>;
+ // interrupts = <40 0x8>;
+ // fsl,mode = "ac97-slave";
+ // rx-fifo-size = <384>;
+ // tx-fifo-size = <384>;
+ //};
+
+ // 5125 PSCs are not 52xx or 5121 PSC compatible
+ // PSC1 uart0 aka ttyPSC0
+ serial@...00 {
+ device_type = "serial";
+ compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
+ port-number = <0>;
+ cell-index = <1>;
+ reg = <0x11100 0x100>;
+ interrupts = <40 0x8 71 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ nodcd;
+ };
+
+ // PSC9 uart1 aka ttyPSC1
+ serial@...00 {
+ device_type = "serial";
+ compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
+ port-number = <1>;
+ cell-index = <9>;
+ reg = <0x11900 0x100>;
+ interrupts = <40 0x8 32 0x8>;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+ nodcd;
+ };
+
+ pscfifo@...00 {
+ compatible = "fsl,mpc5121-psc-fifo";
+ reg = <0x11f00 0x100>;
+ interrupts = <40 0x8>;
+ };
+
+ dma@...00 {
+ compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2"
+ reg = <0x14000 0x1800>;
+ interrupts = <65 0x8>;
+ };
+ };
+};
diff --git a/arch/powerpc/platforms/512x/Kconfig
b/arch/powerpc/platforms/512x/Kconfig
index 27b0651..0dde4b0 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -26,6 +26,20 @@ config MPC5121_GENERIC
Compatible boards include: Protonic LVT base boards (ZANMCU
and VICVT2).
+config PPC_MPC5125
+ bool "Generic support for MPC5125 based boards"
+ depends on PPC_MPC512x
+ select DEFAULT_UIMAGE
+ select PPC_INDIRECT_PCI
+ default n
+
+config MPC5125_TWR
+ bool "Freescale MPC5125 Tower system"
+ depends on PPC_MPC512x
+ select PPC_MPC5125
+ help
+ This option enables support for the MPC5125 TWR board.
+
config PDM360NG
bool "ifm PDM360NG board"
depends on PPC_MPC512x
diff --git a/arch/powerpc/platforms/512x/Makefile
b/arch/powerpc/platforms/512x/Makefile
index 4efc1c4..5c17561 100644
--- a/arch/powerpc/platforms/512x/Makefile
+++ b/arch/powerpc/platforms/512x/Makefile
@@ -5,3 +5,4 @@ obj-y += clock.o mpc512x_shared.o
obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o mpc5121_ads_cpld.o
obj-$(CONFIG_MPC5121_GENERIC) += mpc5121_generic.o
obj-$(CONFIG_PDM360NG) += pdm360ng.o
+obj-$(CONFIG_MPC5125_TWR) += mpc5125_twr.o
diff --git a/arch/powerpc/platforms/512x/clock.c
b/arch/powerpc/platforms/512x/clock.c
index 3dc2a8d..07e0bc0 100644
--- a/arch/powerpc/platforms/512x/clock.c
+++ b/arch/powerpc/platforms/512x/clock.c
@@ -27,6 +27,8 @@
#include <asm/mpc5xxx.h>
#include <asm/clk_interface.h>
+#include "mpc512x.h"
+
#undef CLK_DEBUG
static int clocks_initialized;
@@ -679,8 +681,13 @@ static void psc_clks_init(void)
struct device_node *np;
const u32 *cell_index;
struct platform_device *ofdev;
+ char *psc_compat;
+
+ psc_compat = mpc512x_select_psc_compat();
+ if (!psc_compat)
+ return;
- for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") {
+ for_each_compatible_node(np, NULL, psc_compat) {
cell_index = of_get_property(np, "cell-index", NULL);
if (cell_index) {
int pscnum = *cell_index;
diff --git a/arch/powerpc/platforms/512x/mpc5125_twr.c
b/arch/powerpc/platforms/512x/mpc5125_twr.c
new file mode 100644
index 0000000..7c7facf
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5125_twr.c
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2010 LimePC Multimedia Technologies Co., Limited
+ * Copyright (C) 2011 Vladimir Ermakov <vooon341@...il.com>
+ *
+ * Based on original Freescale Semiconductor BSP
+ * written by Cloudy Chen <chen_yunsong@...era.com>
+ *
+ * MPC5125 Tower board setup
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+
+#include <sysdev/fsl_soc.h>
+
+#include <linux/bootmem.h>
+#include <asm/rheap.h>
+
+#include "mpc512x.h"
+
+/* IOCTL registers for USB1/FEC2 */
+#define IOCTL_USB1_DATA0 0x63
+#define IOCTL_USB1_DATA1 0x64
+#define IOCTL_USB1_DATA2 0x65
+#define IOCTL_USB1_DATA3 0x66
+#define IOCTL_USB1_DATA4 0x67
+#define IOCTL_USB1_DATA5 0x68
+#define IOCTL_USB1_DATA6 0x69
+#define IOCTL_USB1_DATA7 0x6A
+#define IOCTL_USB1_STOP 0x6B
+#define IOCTL_USB1_CLK 0x6C
+#define IOCTL_USB1_NEXT 0x6D
+#define IOCTL_USB1_DIR 0x6E
+
+/* Pin modes */
+#define IOCTL_DEFAULT_MODE 0x03 /* FUNCMUX=0, PUD=0, PUE=0, DS=3 */
+#define IOCTL_FEC2_MODE 0x43 /* FUNCMUX=2, PUD=0, PUE=0, DS=3 */
+
+/* Select mode of USB1 pads.
+ * They could be configured as USB (default), FEC2
+ * and several PSC's and/or GPIO's.
+ * Board specific. It can be platform specific in the future.
+ */
+static void mpc5125_twr_fec2_usb_iopad_init(void __iomem *ioctl, int isusb)
+{
+ int i;
+ const u8 offset[12] = {
+ IOCTL_USB1_DATA0, IOCTL_USB1_DATA1,
+ IOCTL_USB1_DATA2, IOCTL_USB1_DATA3,
+ IOCTL_USB1_DATA4, IOCTL_USB1_DATA5,
+ IOCTL_USB1_DATA6, IOCTL_USB1_DATA7,
+ IOCTL_USB1_STOP, IOCTL_USB1_CLK,
+ IOCTL_USB1_NEXT, IOCTL_USB1_DIR
+ };
+ u8 mode;
+
+ mode = (isusb) ? IOCTL_DEFAULT_MODE : IOCTL_FEC2_MODE;
+ for (i = 0; i < ARRAY_SIZE(offset); i++)
+ out_8(ioctl + offset[i], mode);
+}
+
+static void __init mpc5125_twr_setup_arch(void)
+{
+ struct device_node *np;
+
+ printk(KERN_INFO "TWR-MPC5125 board from Freescale Semiconductor\n");
+
+ /*
+ * io pad config
+ */
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc5125-ioctl");
+ if (np) {
+ void __iomem *ioctl = of_iomap(np, 0);
+
+ mpc5125_twr_fec2_usb_iopad_init(ioctl, 0);
+
+ of_node_put(np);
+ iounmap(ioctl);
+ }
+}
+
+static struct of_device_id __initdata of_bus_ids[] = {
+ { .name = "soc", },
+ {},
+};
+
+static void __init mpc5125_twr_declare_of_platform_devices(void)
+{
+ struct device_node *np;
+
+ if (of_platform_bus_probe(NULL, of_bus_ids, NULL))
+ printk(KERN_ERR __FILE__ ": "
+ "Error while probing of_platform bus\n");
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc5125-nfc");
+ if (np) {
+ of_platform_device_create(np, NULL, NULL);
+ of_node_put(np);
+ }
+}
+
+static void __init mpc5125_twr_init(void)
+{
+ mpc5125_twr_declare_of_platform_devices();
+ mpc5121_clk_init();
+ mpc512x_restart_init();
+ mpc512x_psc_fifo_init();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc5125_twr_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,mpc5125ads");
+}
+
+define_machine(mpc5125_twr) {
+ .name = "TWR-MPC5125",
+ .probe = mpc5125_twr_probe,
+ .setup_arch = mpc5125_twr_setup_arch,
+ .init = mpc5125_twr_init,
+ .init_IRQ = mpc512x_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .calibrate_decr = generic_calibrate_decr,
+ .restart = mpc512x_restart,
+};
diff --git a/arch/powerpc/platforms/512x/mpc512x.h
b/arch/powerpc/platforms/512x/mpc512x.h
index 1ab6d11..91c903f 100644
--- a/arch/powerpc/platforms/512x/mpc512x.h
+++ b/arch/powerpc/platforms/512x/mpc512x.h
@@ -13,8 +13,11 @@
#define __MPC512X_H__
extern void __init mpc512x_init_IRQ(void);
extern void __init mpc512x_init(void);
+extern void __init mpc512x_restart_init(void);
extern int __init mpc5121_clk_init(void);
-void __init mpc512x_declare_of_platform_devices(void);
+extern void __init mpc512x_declare_of_platform_devices(void);
+extern void __init mpc512x_psc_fifo_init(void);
+extern char *mpc512x_select_psc_compat(void);
extern void mpc512x_restart(char *cmd);
extern void mpc512x_init_diu(void);
extern void mpc512x_setup_diu(void);
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c
b/arch/powerpc/platforms/512x/mpc512x_shared.c
index e41ebbd..e79d8ae 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -32,7 +32,7 @@
static struct mpc512x_reset_module __iomem *reset_module_base;
-static void __init mpc512x_restart_init(void)
+void __init mpc512x_restart_init(void)
{
struct device_node *np;
@@ -382,6 +382,21 @@ void __init mpc512x_declare_of_platform_devices(void)
#define DEFAULT_FIFO_SIZE 16
+char *mpc512x_select_psc_compat(void)
+{
+ char *psc_compats[] = {
+ "fsl,mpc5121-psc",
+ "fsl,mpc5125-psc"
+ };
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(psc_compats); i++)
+ if (of_find_compatible_node(NULL, NULL, psc_compats[i]))
+ return psc_compats[i];
+
+ return NULL;
+}
+
static unsigned int __init get_fifo_size(struct device_node *np,
char *prop_name)
{
@@ -407,9 +422,16 @@ void __init mpc512x_psc_fifo_init(void)
void __iomem *psc;
unsigned int tx_fifo_size;
unsigned int rx_fifo_size;
+ char *psc_compat;
int fifobase = 0; /* current fifo address in 32 bit words */
- for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") {
+ psc_compat = mpc512x_select_psc_compat();
+ if (!psc_compat) {
+ pr_err("%s: no compatible devices found\n", __func__);
+ return;
+ }
+
+ for_each_compatible_node(np, NULL, psc_compat) {
tx_fifo_size = get_fifo_size(np, "fsl,tx-fifo-size");
rx_fifo_size = get_fifo_size(np, "fsl,rx-fifo-size");
2011/3/18 Wolfram Sang <w.sang@...gutronix.de>:
> On Fri, Mar 18, 2011 at 02:35:24PM +0300, vooon341@...il.com wrote:
>
>> diff --git a/arch/powerpc/platforms/512x/clock.c
>> b/arch/powerpc/platforms/512x/clock.c
>> index 3dc2a8d..5cadf8e 100644
>> --- a/arch/powerpc/platforms/512x/clock.c
>> +++ b/arch/powerpc/platforms/512x/clock.c
>> @@ -606,6 +606,21 @@ static void rate_clks_init(void)
>> */
>> struct clk dev_clks[2][32];
>>
>> +char *mpc512x_select_psc_compat(void)
>> +{
>> + char *psc_compats[] = {
>> + "fsl,mpc5121-psc",
>> + "fsl,mpc5125-psc"
>> + };
>> + int i;
>> +
>> + for (i = 0; i < ARRAY_SIZE(psc_compats); i++)
>> + if (of_find_compatible_node(NULL, NULL, psc_compats[i]))
>> + return psc_compats[i];
>> +
>> + return NULL;
>> +}
>
> Function looks good to me. Shouldn't that rather be in mpc512x_shared?
>
>> +// IOCTL registers for USB1/FEC2
>
> No c++-style comments, please (here and later).
>
>> +static void mpc5125_psc_iopad_init(void __iomem *ioctl, char *name)
>> +{
>> + struct device_node *np;
>> + const u32 *cell_index;
>> + char *default_psc = "fsl,mpc5125-psc";
>> + char *psc_name;
>> +
>> + if (name)
>> + psc_name = name;
>> + else
>> + psc_name = default_psc;
>
> Caller sets name to NULL. Is this really used?
>
>> +
>> + for_each_compatible_node(np, NULL, psc_name) {
>> + cell_index = of_get_property(np, "cell-index", NULL);
>
> I seem to recall 'cell-index' is deprecated. Grant?
>
>> + if (cell_index) {
>> + u8 __iomem *pscioctl;
>> + int psc_num = *cell_index;
>> + if (psc_num > 1)
>> + continue;
>> +
>> + pscioctl = ioctl + PSC_TO_IOCTL_OFFSET(psc_num);
>> + out_8(pscioctl + IOCTL_PSCx_0, IOCTL_PSCx_0_MODE); // NOTE maybe wrong
>
> Why is it 'maybe wrong'? Can it be improved somehow?
>
>> + out_8(pscioctl + IOCTL_PSCx_1, IOCTL_DEFAULT_MODE);
>> + out_8(pscioctl + IOCTL_PSCx_2, IOCTL_DEFAULT_MODE);
>> + out_8(pscioctl + IOCTL_PSCx_3, IOCTL_DEFAULT_MODE);
>> + out_8(pscioctl + IOCTL_PSCx_4, IOCTL_DEFAULT_MODE);
>
> The defines make it much more readable, thanks.
>
>> + }
>> + }
>> +}
>
> Is this function really board-specific or platform specific?
>
>
>> +static void mpc5125_fec2_usb_io_init(void __iomem *ioctl, int isusb)
>> +{
>> + int i;
>> + const u8 offset[12] = {
>> + IOCTL_USB1_DATA0, IOCTL_USB1_DATA1,
>> + IOCTL_USB1_DATA2, IOCTL_USB1_DATA3,
>> + IOCTL_USB1_DATA4, IOCTL_USB1_DATA5,
>> + IOCTL_USB1_DATA6, IOCTL_USB1_DATA7,
>> + IOCTL_USB1_STOP, IOCTL_USB1_CLK,
>> + IOCTL_USB1_NEXT, IOCTL_USB1_DIR
>> + };
>> + u8 mode;
>> +
>> + mode = (isusb) ? IOCTL_DEFAULT_MODE : IOCTL_FEC2_MODE;
>> + for (i = 0; i < ARRAY_SIZE(offset); i++)
>> + out_8(ioctl + offset[i], mode);
>> +}
>
> Same question here and later. If it is board specific, the function name should
> have something like 'twr' in it; but a few things seem mpc5125-generic
> to me, if I am not mistaken?
>
> Regards,
>
> Wolfram
>
> --
> Pengutronix e.K. | Wolfram Sang |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.10 (GNU/Linux)
>
> iEYEARECAAYFAk2DUdUACgkQD27XaX1/VRtRhwCfU5saH7ThSl1WsdlSseySqvbF
> BFEAoKskDlkkz53myb4FpvOBlMdAtUS1
> =554E
> -----END PGP SIGNATURE-----
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists