Message-Id: <1300580985-10726-2-git-send-email-alan@signal11.us>
Date:	Sat, 19 Mar 2011 20:29:44 -0400
From:	Alan Ott <alan@...nal11.us>
To:	Randy Dunlap <rdunlap@...otime.net>,
	Jonathan Corbet <corbet@....net>,
	Antonio Ospite <ospite@...denti.unina.it>,
	Jiri Kosina <jkosina@...e.cz>, Alan Ott <alan@...nal11.us>,
	Jason Wessel <jason.wessel@...driver.com>,
	Andrew Morton <akpm@...ux-foundation.org>,
	Stefani Seibold <stefani@...bold.net>,
	linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-input@...r.kernel.org
Cc:	Alan Ott <alan@...nal11.us>
Subject: [PATCH v5 1/2] HID: Documentation for hidraw

Documenation for the hidraw driver, with sample program.

Signed-off-by: Alan Ott <alan@...nal11.us>
---
 Documentation/hid/hidraw.txt |  119 ++++++++++++++++++++++++++++++
 samples/Kconfig              |    6 ++
 samples/Makefile             |    2 +-
 samples/hidraw/Makefile      |    8 ++
 samples/hidraw/hid-example.c |  167 ++++++++++++++++++++++++++++++++++++++++++
 5 files changed, 301 insertions(+), 1 deletions(-)
 create mode 100644 Documentation/hid/hidraw.txt
 create mode 100644 samples/hidraw/Makefile
 create mode 100644 samples/hidraw/hid-example.c

diff --git a/Documentation/hid/hidraw.txt b/Documentation/hid/hidraw.txt
new file mode 100644
index 0000000..029e6cb
--- /dev/null
+++ b/Documentation/hid/hidraw.txt
@@ -0,0 +1,119 @@
+      HIDRAW - Raw Access to USB and Bluetooth Human Interface Devices
+     ==================================================================
+
+The hidraw driver provides a raw interface to USB and Bluetooth Human
+Interface Devices (HIDs).  It differs from hiddev in that reports sent and
+received are not parsed by the HID parser, but are sent to and received from
+the device unmodified.
+
+Hidraw should be used if the userspace application knows exactly how to
+communicate with the hardware device, and is able to construct the HID
+reports manually.  This is often the case when making userspace drivers for
+custom HID devices.
+
+Hidraw is also useful for communicating with non-conformant HID devices
+which send and receive data in a way that is inconsistent with their report
+descriptors.  Because hiddev parses reports which are sent and received
+through it, checking them against the device's report descriptor, such
+communication with these non-conformant devices is impossible using hiddev.
+Hidraw is the only alternative, short of writing a custom kernel driver, for
+these non-conformant devices.
+
+A benefit of hidraw is that its use by userspace applications is independent
+of the underlying hardware type.  Currently, Hidraw is implemented for USB
+and Bluetooth.  In the future, as new hardware bus types are developed which
+use the HID specification, hidraw will be expanded to add support for these
+new bus types.
+
+Hidraw uses a dynamic major number, meaning that udev should be relied on to
+create hidraw device nodes.  Udev will typically create the device nodes
+directly under /dev (eg: /dev/hidraw0).  As this location is distribution-
+and udev rule-dependent, applications should use libudev to locate hidraw
+devices attached to the system.  There is a tutorial on libudev with a
+working example at:
+	http://www.signal11.us/oss/udev/
+
+The HIDRAW API
+---------------
+
+read()
+-------
+read() will read a queued report received from the HID device. On USB
+devices, the reports read using read() are the reports sent from the device
+on the INTERRUPT IN endpoint.  By default, read() will block until there is
+a report available to be read.  read() can be made non-blocking, by passing
+the O_NONBLOCK flag to open(), or by setting the O_NONBLOCK flag using
+fcntl().
+
+On a device which uses numbered reports, the first byte of the returned data
+will be the report number; the report data follows, beginning in the second
+byte.  For devices which do not use numbered reports, the report data
+will begin at the first byte.
+
+write()
+--------
+The write() function will write a report to the device. For USB devices, if
+the device has an INTERRUPT OUT endpoint, the report will be sent on that
+endpoint. If it does not, the report will be sent over the control endpoint,
+using a SET_REPORT transfer.
+
+The first byte of the buffer passed to write() should be set to the report
+number.  If the device does not use numbered reports, the first byte should
+be set to 0. The report data itself should begin at the second byte.
+
+ioctl()
+--------
+Hidraw supports the following ioctls:
+
+HIDIOCGRDESCSIZE: Get Report Descriptor Size
+This ioctl will get the size of the device's report descriptor.
+
+HIDIOCGRDESC: Get Report Descriptor
+This ioctl returns the device's report descriptor using a
+hidraw_report_descriptor struct.  Make sure to set the size field of the
+hidraw_report_descriptor struct to the size returned from HIDIOCGRDESCSIZE.
+
+HIDIOCGRAWINFO: Get Raw Info
+This ioctl will return a hidraw_devinfo struct containing the bus type, the
+vendor ID (VID), and product ID (PID) of the device. The bus type can be one
+of:
+	BUS_USB
+	BUS_HIL
+	BUS_BLUETOOTH
+	BUS_VIRTUAL
+which are defined in linux/input.h.
+
+HIDIOCGRAWNAME(len): Get Raw Name
+This ioctl returns a string containing the vendor and product strings of
+the device.  The returned string is Unicode, UTF-8 encoded.
+
+HIDIOCGRAWPHYS(len): Get Physical Address
+This ioctl returns a string representing the physical address of the device.
+For USB devices, the string contains the physical path to the device (the
+USB controller, hubs, ports, etc).  For Bluetooth devices, the string
+contains the hardware (MAC) address of the device.
+
+HIDIOCSFEATURE(len): Send a Feature Report
+This ioctl will send a feature report to the device.  Per the HID
+specification, feature reports are always sent using the control endpoint.
+Set the first byte of the supplied buffer to the report number.  For devices
+which do not use numbered reports, set the first byte to 0. The report data
+begins in the second byte. Make sure to set len accordingly, to one more
+than the length of the report (to account for the report number).
+
+HIDIOCGFEATURE(len): Get a Feature Report
+This ioctl will request a feature report from the device using the control
+endpoint.  The first byte of the supplied buffer should be set to the report
+number of the requested report.  For devices which do not use numbered
+reports, set the first byte to 0.  The report will be returned starting at
+the first byte of the buffer (ie: the report number is not returned).
+
+Example
+---------
+In samples/, find hid-example.c, which shows examples of read(), write(),
+and all the ioctls for hidraw.  The code may be used by anyone for any
+purpose, and can serve as a starting point for developing applications using
+hidraw.
+
+Document by:
+	Alan Ott <alan@...nal11.us>, Signal 11 Software
diff --git a/samples/Kconfig b/samples/Kconfig
index e03cf0e..52f4264 100644
--- a/samples/Kconfig
+++ b/samples/Kconfig
@@ -61,4 +61,10 @@ config SAMPLE_KDB
 	  Build an example of how to dynamically add the hello
 	  command to the kdb shell.
 
+config SAMPLE_HIDRAW
+	tristate "Build simple hidraw example"
+	depends on HIDRAW
+	help
+	  Build an example of how to use hidraw from userspace.
+
 endif # SAMPLES
diff --git a/samples/Makefile b/samples/Makefile
index f26c095..6280817 100644
--- a/samples/Makefile
+++ b/samples/Makefile
@@ -1,4 +1,4 @@
 # Makefile for Linux samples code
 
 obj-$(CONFIG_SAMPLES)	+= kobject/ kprobes/ tracepoints/ trace_events/ \
-			   hw_breakpoint/ kfifo/ kdb/
+			   hw_breakpoint/ kfifo/ kdb/ hidraw/
diff --git a/samples/hidraw/Makefile b/samples/hidraw/Makefile
new file mode 100644
index 0000000..7811cb0
--- /dev/null
+++ b/samples/hidraw/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := hid-example
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/samples/hidraw/hid-example.c b/samples/hidraw/hid-example.c
new file mode 100644
index 0000000..40e3d62
--- /dev/null
+++ b/samples/hidraw/hid-example.c
@@ -0,0 +1,167 @@
+/*
+ * Hidraw Userspace Example
+ *
+ * Copyright (c) 2010 Alan Ott <alan@...nal11.us>
+ * Copyright (c) 2010 Signal 11 Software
+ *
+ * The code may be used by anyone for any purpose,
+ * and can serve as a starting point for developing
+ * applications using hidraw.
+ */
+
+/* Linux */
+#include <linux/types.h>
+#include <linux/input.h>
+#include <linux/hidraw.h>
+
+/* Unix */
+#include <sys/ioctl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+
+/* C */
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <errno.h>
+
+const char *bus_str(int bus);
+
+int main(int argc, char **argv)
+{
+	int fd;
+	int i, res, desc_size = 0;
+	char buf[256];
+	struct hidraw_report_descriptor rpt_desc;
+	struct hidraw_devinfo info;
+
+	/* Open the Device with non-blocking reads. In real life,
+	   don't use a hard coded path; use libudev instead. */
+	fd = open("/dev/hidraw0", O_RDWR|O_NONBLOCK);
+
+	if (fd < 0) {
+		perror("Unable to open device");
+		return 1;
+	}
+
+	memset(&rpt_desc, 0x0, sizeof(rpt_desc));
+	memset(&info, 0x0, sizeof(info));
+	memset(buf, 0x0, sizeof(buf));
+
+	/* Get Report Descriptor Size */
+	res = ioctl(fd, HIDIOCGRDESCSIZE, &desc_size);
+	if (res < 0)
+		perror("HIDIOCGRDESCSIZE");
+	else
+		printf("Report Descriptor Size: %d\n", desc_size);
+
+	/* Get Report Descriptor */
+	rpt_desc.size = desc_size;
+	res = ioctl(fd, HIDIOCGRDESC, &rpt_desc);
+	if (res < 0) {
+		perror("HIDIOCGRDESC");
+	} else {
+		printf("Report Descriptor:\n");
+		for (i = 0; i < rpt_desc.size; i++)
+			printf("%hhx ", rpt_desc.value[i]);
+		puts("\n");
+	}
+
+	/* Get Raw Name */
+	res = ioctl(fd, HIDIOCGRAWNAME(256), buf);
+	if (res < 0)
+		perror("HIDIOCGRAWNAME");
+	else
+		printf("Raw Name: %s\n", buf);
+
+	/* Get Physical Location */
+	res = ioctl(fd, HIDIOCGRAWPHYS(256), buf);
+	if (res < 0)
+		perror("HIDIOCGRAWPHYS");
+	else
+		printf("Raw Phys: %s\n", buf);
+
+	/* Get Raw Info */
+	res = ioctl(fd, HIDIOCGRAWINFO, &info);
+	if (res < 0) {
+		perror("HIDIOCGRAWINFO");
+	} else {
+		printf("Raw Info:\n");
+		printf("\tbustype: %d (%s)\n",
+			info.bustype, bus_str(info.bustype));
+		printf("\tvendor: 0x%04hx\n", info.vendor);
+		printf("\tproduct: 0x%04hx\n", info.product);
+	}
+
+	/* Set Feature */
+	buf[0] = 0x9; /* Report Number */
+	buf[1] = 0xff;
+	buf[2] = 0xff;
+	buf[3] = 0xff;
+	res = ioctl(fd, HIDIOCSFEATURE(4), buf);
+	if (res < 0)
+		perror("HIDIOCSFEATURE");
+	else
+		printf("ioctl HIDIOCGFEATURE returned: %d\n", res);
+
+	/* Get Feature */
+	buf[0] = 0x9; /* Report Number */
+	res = ioctl(fd, HIDIOCGFEATURE(256), buf);
+	if (res < 0) {
+		perror("HIDIOCGFEATURE");
+	} else {
+		printf("ioctl HIDIOCGFEATURE returned: %d\n", res);
+		printf("Report data (not containing the report number):\n\t");
+		for (i = 0; i < res; i++)
+			printf("%hhx ", buf[i]);
+		puts("\n");
+	}
+
+	/* Send a Report to the Device */
+	buf[0] = 0x1; /* Report Number */
+	buf[1] = 0x77;
+	res = write(fd, buf, 2);
+	if (res < 0) {
+		printf("Error: %d\n", errno);
+		perror("write");
+	} else {
+		printf("write() wrote %d bytes\n", res);
+	}
+
+	/* Get a report from the device */
+	res = read(fd, buf, 16);
+	if (res < 0) {
+		perror("read");
+	} else {
+		printf("read() read %d bytes:\n\t", res);
+		for (i = 0; i < res; i++)
+			printf("%hhx ", buf[i]);
+		puts("\n");
+	}
+	close(fd);
+	return 0;
+}
+
+const char *
+bus_str(int bus)
+{
+	switch (bus) {
+	case BUS_USB:
+		return "USB";
+		break;
+	case BUS_HIL:
+		return "HIL";
+		break;
+	case BUS_BLUETOOTH:
+		return "Bluetooth";
+		break;
+	case BUS_VIRTUAL:
+		return "Virtual";
+		break;
+	default:
+		return "Other";
+		break;
+	}
+}
-- 
1.7.0.4


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists