| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1300782452-528-2-git-send-email-hs@denx.de>
Date: Tue, 22 Mar 2011 09:27:27 +0100
From: Heiko Schocher <hs@...x.de>
To: linuxppc-dev@...ts.ozlabs.org
Cc: Heiko Schocher <hs@...x.de>, Wolfram Sang <w.sang@...gutronix.de>,
Grant Likely <grant.likely@...retlab.ca>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
linux-fbdev@...r.kernel.org, devicetree-discuss@...abs.org,
Ben Dooks <ben@...tec.co.uk>,
Vincent Sanders <vince@...tec.co.uk>,
Samuel Ortiz <sameo@...ux.intel.com>,
linux-kernel@...r.kernel.org, Randy Dunlap <rdunlap@...otime.net>,
Wolfgang Denk <wd@...x.de>, Paul Mundt <lethal@...ux-sh.org>
Subject: [PATCH v1 1/6] powerpc, 5200: add support for charon board
Signed-off-by: Heiko Schocher <hs@...x.de>
Acked-by: Benjamin Herrenschmidt <benh@...nel.crashing.org>
cc: Wolfram Sang <w.sang@...gutronix.de>
cc: Grant Likely <grant.likely@...retlab.ca>
cc: Benjamin Herrenschmidt <benh@...nel.crashing.org>
cc: linux-fbdev@...r.kernel.org
cc: devicetree-discuss@...abs.org
cc: Ben Dooks <ben@...tec.co.uk>
cc: Vincent Sanders <vince@...tec.co.uk>
cc: Samuel Ortiz <sameo@...ux.intel.com>
cc: linux-kernel@...r.kernel.org
cc: Randy Dunlap <rdunlap@...otime.net>
cc: Wolfgang Denk <wd@...x.de>
cc: Paul Mundt <lethal@...ux-sh.org>
---
- changes since v1:
add comments from Wolfram Sang
- no defconfig file
- comment corrected in DTS
- boardlist sorted alphabetically
- commit log without boardinfo
- changes for v6:
- rebased against current head
- repost complete patchserie
- added Acked-by from Benjamin Herrenschmidt
arch/powerpc/boot/dts/charon.dts | 226 ++++++++++++++++++++++++++
arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 +
2 files changed, 227 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/charon.dts
diff --git a/arch/powerpc/boot/dts/charon.dts b/arch/powerpc/boot/dts/charon.dts
new file mode 100644
index 0000000..9776889
--- /dev/null
+++ b/arch/powerpc/boot/dts/charon.dts
@@ -0,0 +1,226 @@
+/*
+ * charon board Device Tree Source
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@...ihalf.com>
+ *
+ * Copyright (C) 2010 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@...x.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "anon,charon";
+ compatible = "anon,charon";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>; // 128MB
+ };
+
+ soc5200@...00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200-immr";
+ ranges = <0 0xf0000000 0x0000c000>;
+ reg = <0xf0000000 0x00000100>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "fsl,mpc5200-cdm";
+ reg = <0x200 0x38>;
+ };
+
+ mpc5200_pic: interrupt-controller@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "fsl,mpc5200-pic";
+ reg = <0x500 0x80>;
+ };
+
+ timer@600 { // General Purpose Timer
+ compatible = "fsl,mpc5200-gpt";
+ reg = <0x600 0x10>;
+ interrupts = <1 9 0>;
+ fsl,has-wdt;
+ };
+
+ can@900 {
+ compatible = "fsl,mpc5200-mscan";
+ interrupts = <2 17 0>;
+ reg = <0x900 0x80>;
+ };
+
+ can@980 {
+ compatible = "fsl,mpc5200-mscan";
+ interrupts = <2 18 0>;
+ reg = <0x980 0x80>;
+ };
+
+ gpio_simple: gpio@b00 {
+ compatible = "fsl,mpc5200-gpio";
+ reg = <0xb00 0x40>;
+ interrupts = <1 7 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ usb@...0 {
+ compatible = "fsl,mpc5200-ohci","ohci-be";
+ reg = <0x1000 0xff>;
+ interrupts = <2 6 0>;
+ };
+
+ dma-controller@...0 {
+ device_type = "dma-controller";
+ compatible = "fsl,mpc5200-bestcomm";
+ reg = <0x1200 0x80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
+ };
+
+ xlb@...0 {
+ compatible = "fsl,mpc5200-xlb";
+ reg = <0x1f00 0x100>;
+ };
+
+ serial@...0 { // PSC1
+ compatible = "fsl,mpc5200-psc-uart";
+ reg = <0x2000 0x100>;
+ interrupts = <2 1 0>;
+ };
+
+ serial@...0 { // PSC3
+ compatible = "fsl,mpc5200-psc-uart";
+ reg = <0x2400 0x100>;
+ interrupts = <2 3 0>;
+ };
+
+ ethernet@...0 {
+ compatible = "fsl,mpc5200-fec";
+ reg = <0x3000 0x400>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <2 5 0>;
+ fixed-link = <1 1 100 0 0>;
+ };
+
+ mdio@...0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+ };
+
+ ata@...0 {
+ compatible = "fsl,mpc5200-ata";
+ reg = <0x3a00 0x100>;
+ interrupts = <2 7 0>;
+ };
+
+ i2c@...0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d00 0x40>;
+ interrupts = <2 15 0>;
+ };
+
+
+ i2c@...0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d40 0x40>;
+ interrupts = <2 16 0>;
+
+ dtt@28 {
+ compatible = "national,lm80";
+ reg = <0x28>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+ };
+
+ sram@...0 {
+ compatible = "fsl,mpc5200-sram";
+ reg = <0x8000 0x4000>;
+ };
+ };
+
+ localbus {
+ compatible = "fsl,mpc5200-lpb","simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = < 0 0 0xfc000000 0x02000000
+ 3 0 0xe8000000 0x00080000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ bank-width = <4>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+ };
+
+ mram0@3,0 {
+ compatible = "mtd-ram";
+ reg = <3 0x00000 0x80000>;
+ bank-width = <1>;
+ };
+ };
+
+ pci@...00d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "fsl,mpc5200-pci";
+ reg = <0xf0000d00 0x100>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
+ 0xc000 0 0 2 &mpc5200_pic 0 0 3
+ 0xc000 0 0 3 &mpc5200_pic 0 0 3
+ 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 10 0>;
+ bus-range = <0 0>;
+ ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+ 0x02000000 0 0x90000000 0x90000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+ };
+};
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index e36d6e2..846b789 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void)
/* list of the supported boards */
static const char *board[] __initdata = {
+ "anon,charon",
"intercontrol,digsy-mtc",
"manroland,mucmc52",
"manroland,uc101",
--
1.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists