| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1301156180-12192-1-git-send-email-ralf.thielow@googlemail.com>
Date: Sat, 26 Mar 2011 17:16:17 +0100
From: Ralf Thielow <ralf.thielow@...glemail.com>
To: gregkh@...e.de
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
Ralf Thielow <ralf.thielow@...glemail.com>
Subject: [PATCH 1/4] staging: keucr: smscsi: Fixed most checkpatch warnings and errors.
This cleanup fixes most of the checkpatch warnings and errors.
Remaining warnings and errors are left untouched on purpose to
avoid making the code less readable. This cleanup also removes
some worthless comments.
Signed-off-by: Ralf Thielow <ralf.thielow@...glemail.com>
---
drivers/staging/keucr/smscsi.c | 148 +++++++++++++++++++++-------------------
1 files changed, 79 insertions(+), 69 deletions(-)
diff --git a/drivers/staging/keucr/smscsi.c b/drivers/staging/keucr/smscsi.c
index 6211686..c3db085 100644
--- a/drivers/staging/keucr/smscsi.c
+++ b/drivers/staging/keucr/smscsi.c
@@ -9,26 +9,24 @@
#include "usb.h"
#include "scsiglue.h"
#include "transport.h"
-//#include "smcommon.h"
#include "smil.h"
-int SM_SCSI_Test_Unit_Ready (struct us_data *us, struct scsi_cmnd *srb);
-int SM_SCSI_Inquiry (struct us_data *us, struct scsi_cmnd *srb);
-int SM_SCSI_Mode_Sense (struct us_data *us, struct scsi_cmnd *srb);
-int SM_SCSI_Start_Stop (struct us_data *us, struct scsi_cmnd *srb);
-int SM_SCSI_Read_Capacity (struct us_data *us, struct scsi_cmnd *srb);
-int SM_SCSI_Read (struct us_data *us, struct scsi_cmnd *srb);
-int SM_SCSI_Write (struct us_data *us, struct scsi_cmnd *srb);
+int SM_SCSI_Test_Unit_Ready(struct us_data *us, struct scsi_cmnd *srb);
+int SM_SCSI_Inquiry(struct us_data *us, struct scsi_cmnd *srb);
+int SM_SCSI_Mode_Sense(struct us_data *us, struct scsi_cmnd *srb);
+int SM_SCSI_Start_Stop(struct us_data *us, struct scsi_cmnd *srb);
+int SM_SCSI_Read_Capacity(struct us_data *us, struct scsi_cmnd *srb);
+int SM_SCSI_Read(struct us_data *us, struct scsi_cmnd *srb);
+int SM_SCSI_Write(struct us_data *us, struct scsi_cmnd *srb);
-extern struct SSFDCTYPE Ssfdc;
-extern struct ADDRESS Media;
-extern PBYTE SMHostAddr;
-extern DWORD ErrXDCode;
+extern struct SSFDCTYPE Ssfdc;
+extern struct ADDRESS Media;
+extern PBYTE SMHostAddr;
+extern DWORD ErrXDCode;
-//----- SM_SCSIIrp() --------------------------------------------------
int SM_SCSIIrp(struct us_data *us, struct scsi_cmnd *srb)
{
- int result;
+ int result;
us->SrbStatus = SS_SUCCESS;
switch (srb->cmnd[0])
@@ -48,99 +46,108 @@ int SM_SCSIIrp(struct us_data *us, struct scsi_cmnd *srb)
return result;
}
-//----- SM_SCSI_Test_Unit_Ready() --------------------------------------------------
int SM_SCSI_Test_Unit_Ready(struct us_data *us, struct scsi_cmnd *srb)
{
- //printk("SM_SCSI_Test_Unit_Ready\n");
- if (us->SM_Status.Insert && us->SM_Status.Ready)
+ /* printk("SM_SCSI_Test_Unit_Ready\n"); */
+ if (us->SM_Status.Insert && us->SM_Status.Ready) {
return USB_STOR_TRANSPORT_GOOD;
- else
- {
+ } else {
ENE_SMInit(us);
return USB_STOR_TRANSPORT_GOOD;
}
-
+
return USB_STOR_TRANSPORT_GOOD;
}
-//----- SM_SCSI_Inquiry() --------------------------------------------------
int SM_SCSI_Inquiry(struct us_data *us, struct scsi_cmnd *srb)
{
- //printk("SM_SCSI_Inquiry\n");
- BYTE data_ptr[36] = {0x00, 0x80, 0x02, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x55, 0x53, 0x42, 0x32, 0x2E, 0x30, 0x20, 0x20, 0x43, 0x61, 0x72, 0x64, 0x52, 0x65, 0x61, 0x64, 0x65, 0x72, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x30, 0x31, 0x30, 0x30};
+ /* printk("SM_SCSI_Inquiry\n"); */
+ BYTE data_ptr[36] = {0x00, 0x80, 0x02, 0x00, 0x1F, 0x00,
+ 0x00, 0x00, 0x55, 0x53, 0x42, 0x32,
+ 0x2E, 0x30, 0x20, 0x20, 0x43, 0x61,
+ 0x72, 0x64, 0x52, 0x65, 0x61, 0x64,
+ 0x65, 0x72, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x30, 0x31, 0x30, 0x30};
usb_stor_set_xfer_buf(us, data_ptr, 36, srb, TO_XFER_BUF);
return USB_STOR_TRANSPORT_GOOD;
}
-//----- SM_SCSI_Mode_Sense() --------------------------------------------------
int SM_SCSI_Mode_Sense(struct us_data *us, struct scsi_cmnd *srb)
{
- BYTE mediaNoWP[12] = {0x0b,0x00,0x00,0x08,0x00,0x00,0x71,0xc0,0x00,0x00,0x02,0x00};
- BYTE mediaWP[12] = {0x0b,0x00,0x80,0x08,0x00,0x00,0x71,0xc0,0x00,0x00,0x02,0x00};
+ BYTE mediaNoWP[12] = {0x0b, 0x00, 0x00, 0x08, 0x00, 0x00,
+ 0x71, 0xc0, 0x00, 0x00, 0x02, 0x00};
+ BYTE mediaWP[12] = {0x0b, 0x00, 0x80, 0x08, 0x00, 0x00,
+ 0x71, 0xc0, 0x00, 0x00, 0x02, 0x00};
if (us->SM_Status.WtP)
usb_stor_set_xfer_buf(us, mediaWP, 12, srb, TO_XFER_BUF);
else
usb_stor_set_xfer_buf(us, mediaNoWP, 12, srb, TO_XFER_BUF);
-
return USB_STOR_TRANSPORT_GOOD;
}
-//----- SM_SCSI_Read_Capacity() --------------------------------------------------
int SM_SCSI_Read_Capacity(struct us_data *us, struct scsi_cmnd *srb)
{
unsigned int offset = 0;
struct scatterlist *sg = NULL;
- DWORD bl_num;
- WORD bl_len;
- BYTE buf[8];
+ DWORD bl_num;
+ WORD bl_len;
+ BYTE buf[8];
printk("SM_SCSI_Read_Capacity\n");
bl_len = 0x200;
bl_num = Ssfdc.MaxLogBlocks * Ssfdc.MaxSectors * Ssfdc.MaxZones - 1;
- //printk("MaxLogBlocks = %x\n", Ssfdc.MaxLogBlocks);
- //printk("MaxSectors = %x\n", Ssfdc.MaxSectors);
- //printk("MaxZones = %x\n", Ssfdc.MaxZones);
- //printk("bl_num = %x\n", bl_num);
+
+ /*
+ * printk("MaxLogBlocks = %x\n", Ssfdc.MaxLogBlocks);
+ * printk("MaxSectors = %x\n", Ssfdc.MaxSectors);
+ * printk("MaxZones = %x\n", Ssfdc.MaxZones);
+ * printk("bl_num = %x\n", bl_num);
+ */
us->bl_num = bl_num;
printk("bl_len = %x\n", bl_len);
printk("bl_num = %x\n", bl_num);
- //srb->request_bufflen = 8;
- buf[0] = (bl_num>>24) & 0xff;
- buf[1] = (bl_num>>16) & 0xff;
- buf[2] = (bl_num>> 8) & 0xff;
- buf[3] = (bl_num>> 0) & 0xff;
- buf[4] = (bl_len>>24) & 0xff;
- buf[5] = (bl_len>>16) & 0xff;
- buf[6] = (bl_len>> 8) & 0xff;
- buf[7] = (bl_len>> 0) & 0xff;
-
+ buf[0] = (bl_num >> 24) & 0xff;
+ buf[1] = (bl_num >> 16) & 0xff;
+ buf[2] = (bl_num >> 8) & 0xff;
+ buf[3] = (bl_num >> 0) & 0xff;
+ buf[4] = (bl_len >> 24) & 0xff;
+ buf[5] = (bl_len >> 16) & 0xff;
+ buf[6] = (bl_len >> 8) & 0xff;
+ buf[7] = (bl_len >> 0) & 0xff;
+
usb_stor_access_xfer_buf(us, buf, 8, srb, &sg, &offset, TO_XFER_BUF);
- //usb_stor_set_xfer_buf(us, buf, srb->request_bufflen, srb, TO_XFER_BUF);
+ /*
+ * usb_stor_set_xfer_buf(us, buf, srb->request_bufflen,
+ * srb, TO_XFER_BUF);
+ */
return USB_STOR_TRANSPORT_GOOD;
}
-//----- SM_SCSI_Read() --------------------------------------------------
int SM_SCSI_Read(struct us_data *us, struct scsi_cmnd *srb)
{
- //struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
- int result=0;
- PBYTE Cdb = srb->cmnd;
- DWORD bn = ((Cdb[2]<<24) & 0xff000000) | ((Cdb[3]<<16) & 0x00ff0000) |
- ((Cdb[4]<< 8) & 0x0000ff00) | ((Cdb[5]<< 0) & 0x000000ff);
- WORD blen = ((Cdb[7]<< 8) & 0xff00) | ((Cdb[8]<< 0) & 0x00ff);
- DWORD blenByte = blen * 0x200;
- void *buf;
-
- //printk("SCSIOP_READ --- bn = %X, blen = %X, srb->use_sg = %X\n", bn, blen, srb->use_sg);
-
+ /* struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; */
+ int result = 0;
+ PBYTE Cdb = srb->cmnd;
+ DWORD bn =
+ ((Cdb[2] << 24) & 0xff000000) | ((Cdb[3] << 16) & 0x00ff0000) |
+ ((Cdb[4] << 8) & 0x0000ff00) | ((Cdb[5] << 0) & 0x000000ff);
+ WORD blen = ((Cdb[7] << 8) & 0xff00) | ((Cdb[8] << 0) & 0x00ff);
+ DWORD blenByte = blen * 0x200;
+ void *buf;
+
+ /*
+ * printk("SCSIOP_READ --- bn = %X, blen = %X, srb->use_sg = %X\n",
+ * bn, blen, srb->use_sg);
+ */
+
if (bn > us->bl_num)
return USB_STOR_TRANSPORT_ERROR;
@@ -159,19 +166,22 @@ int SM_SCSI_Read(struct us_data *us, struct scsi_cmnd *srb)
return USB_STOR_TRANSPORT_GOOD;
}
-//----- SM_SCSI_Write() --------------------------------------------------
int SM_SCSI_Write(struct us_data *us, struct scsi_cmnd *srb)
{
- //struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
- int result=0;
- PBYTE Cdb = srb->cmnd;
- DWORD bn = ((Cdb[2]<<24) & 0xff000000) | ((Cdb[3]<<16) & 0x00ff0000) |
- ((Cdb[4]<< 8) & 0x0000ff00) | ((Cdb[5]<< 0) & 0x000000ff);
- WORD blen = ((Cdb[7]<< 8) & 0xff00) | ((Cdb[8]<< 0) & 0x00ff);
- DWORD blenByte = blen * 0x200;
- void *buf;
-
- //printk("SCSIOP_Write --- bn = %X, blen = %X, srb->use_sg = %X\n", bn, blen, srb->use_sg);
+ /* struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; */
+ int result = 0;
+ PBYTE Cdb = srb->cmnd;
+ DWORD bn =
+ ((Cdb[2] << 24) & 0xff000000) | ((Cdb[3] << 16) & 0x00ff0000) |
+ ((Cdb[4] << 8) & 0x0000ff00) | ((Cdb[5] << 0) & 0x000000ff);
+ WORD blen = ((Cdb[7] << 8) & 0xff00) | ((Cdb[8] << 0) & 0x00ff);
+ DWORD blenByte = blen * 0x200;
+ void *buf;
+
+ /*
+ * printk("SCSIOP_Write --- bn = %X, blen = %X, srb->use_sg = %X\n",
+ * bn, blen, srb->use_sg);
+ */
if (bn > us->bl_num)
return USB_STOR_TRANSPORT_ERROR;
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists