Message-Id: <1301400481-11645-3-git-send-email-jamie@jamieiles.com>
Date:	Tue, 29 Mar 2011 13:07:59 +0100
From:	Jamie Iles <jamie@...ieiles.com>
To:	linux-kernel@...r.kernel.org
Cc:	gregkh@...e.de, vapier@...too.org, arnd@...db.de,
	Jamie Iles <jamie@...ieiles.com>
Subject: [RFC PATCHv4 2/4] drivers/otp: add support for Picoxcell PC3X3 OTP

The OTP in PC3X3 is 16KB and can be split into 1, 2, 4 or 8
regions each taking a different redundancy format.  The formats
increase the redundancy of the memory at the expense of bit storage
to help protect against programming errors for devices in the field.

Changes since v3:
	- Move the read_word/write_word ops into device ops.

Changes since v2:
	- Add support for CONFIG_OTP_WRITE_ENABLE.

Signed-off-by: Jamie Iles <jamie@...ieiles.com>
---
 drivers/otp/Kconfig     |    7 +
 drivers/otp/Makefile    |    1 +
 drivers/otp/otp_pc3x3.c | 1102 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 1110 insertions(+), 0 deletions(-)
 create mode 100644 drivers/otp/otp_pc3x3.c

diff --git a/drivers/otp/Kconfig b/drivers/otp/Kconfig
index a1ce310..edac4d5 100644
--- a/drivers/otp/Kconfig
+++ b/drivers/otp/Kconfig
@@ -25,4 +25,11 @@ config OTP_WRITE_ENABLE
 
 	  If unsure, say N.
 
+config OTP_PC3X3
+	tristate "Enable support for Picochip PC3X3 OTP"
+	depends on ARCH_PICOXCELL
+	help
+	  Say Y or M here to allow support for the OTP found in PC3X3 devices.
+	  If you say M then the module will be called otp_pc3x3.
+
 endif
diff --git a/drivers/otp/Makefile b/drivers/otp/Makefile
index 84fd03e..c710ec4 100644
--- a/drivers/otp/Makefile
+++ b/drivers/otp/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_OTP)	+= otp.o
+obj-$(CONFIG_OTP_PC3X3)	+= otp_pc3x3.o
diff --git a/drivers/otp/otp_pc3x3.c b/drivers/otp/otp_pc3x3.c
new file mode 100644
index 0000000..cde677e
--- /dev/null
+++ b/drivers/otp/otp_pc3x3.c
@@ -0,0 +1,1102 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@...ochip.com
+ *
+ * This driver implements a picoxcellotp backend for reading and writing the
+ * OTP memory in Picochip PC3X3 devices. This OTP can be used for executing
+ * secure boot code or for the secure storage of keys and any other user data.
+ */
+#define pr_fmt(fmt) "pc3x3otp: " fmt
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/otp.h>
+#include <linux/platform_device.h>
+
+/*
+ * To test the user interface and most of the driver logic, we have a test
+ * mode whereby rather than writing to OTP we have a RAM buffer that simulates
+ * the OTP. This means that we can test everything apart from:
+ *
+ *	- The OTP state machines and commands.
+ *	- Failure to program bits.
+ */
+static int test_mode;
+module_param(test_mode, bool, S_IRUSR);
+MODULE_PARM_DESC(test_mode,
+		 "Run in test mode (use a memory buffer rather than OTP");
+
+
+/* The control and status registers follow the AXI OTP map. */
+#define OTP_CTRL_BASE			0x4000
+
+/*
+ * This is the maximum number of times to try and soak a failed bit. We get
+ * this from the Sidense documentation. After 16 attempts it is very unlikely
+ * that anything will change.
+ */
+#define MAX_PROGRAM_RETRIES			16
+#define OTP_MACRO_CMD_REG_OFFSET		0x00
+#define OTP_MACRO_STATUS_REG_OFFSET		0x04
+#define OTP_MACRO_CONFIG_REG_OFFSET		0x08
+#define OTP_MACRO_ADDR_REG_OFFSET		0x0C
+#define OTP_MACRO_D_LO_REG_OFFSET		0x10
+#define OTP_MACRO_D_HI_REG_OFFSET		0x14
+#define OTP_MACRO_Q_LO_REG_OFFSET		0x20
+#define OTP_MACRO_Q_HI_REG_OFFSET		0x24
+#define OTP_MACRO_Q_MR_REG_OFFSET		0x28
+#define OTP_MACRO_Q_MRAB_REG_OFFSET		0x2C
+#define OTP_MACRO_Q_SR_LO_REG_OFFSET		0x30
+#define OTP_MACRO_Q_SR_HI_REG_OFFSET		0x34
+#define OTP_MACRO_Q_RR_LO_REG_OFFSET		0x38
+#define OTP_MACRO_Q_RR_HI_REG_OFFSET		0x3C
+#define OTP_MACRO_TIME_RD_REG_OFFSET		0x40
+#define OTP_MACRO_TIME_WR_REG_OFFSET		0x44
+#define OTP_MACRO_TIME_PGM_REG_OFFSET		0x48
+#define OTP_MACRO_TIME_PCH_REG_OFFSET		0x4C
+#define OTP_MACRO_TIME_CMP_REG_OFFSET		0x50
+#define OTP_MACRO_TIME_RST_REG_OFFSET		0x54
+#define OTP_MACRO_TIME_PWR_REG_OFFSET		0x58
+#define OTP_MACRO_DIRECT_IO_REG_OFFSET		0x5C
+
+/*
+ * The OTP addresses of the special register. This is in the boot
+ * sector and we use words 0 and 2 of sector 0 in redundant format.
+ */
+#define SR_ADDRESS_0				((1 << 11) | 0x0)
+#define SR_ADDRESS_2				((1 << 11) | 0x2)
+#define SR_AXI_ADDRESS_MASK			0x7
+
+#define OTP_MR_REDUNDANT_READ_MASK		(1 << 4)
+#define OTP_MR_DIFFERENTIAL_READ_MASK		(1 << 0)
+#define OTP_MRA_CHARGE_PUMP_ENABLE_MASK		(1 << 12)
+#define OTP_MRA_CHARGE_PUMP_MONITOR_MASK	(1 << 15)
+#define OTP_MRA_READ_REFERENCE_LEVEL9_MASK	(1 << 9)
+#define OTP_MRA_READ_REFERENCE_LEVEL5_MASK	(1 << 5)
+#define OTP_STATUS_VPP_APPLIED			(1 << 4)
+#define OTP_TIME_PGM_PULSE_MASK			0x7FF
+#define OTP_STATUS_LCS				(1 << 1)
+
+#define OTP_MR_SELF_TIMING			(1 << 2)
+#define OTP_MR_PROGRAMMABLE_DELAY		(1 << 5)
+#define OTP_MR_PROGRAMMABLE_DELAY_CONTROL	(1 << 8)
+
+#define OTP_MRB_VREF_ADJUST_0			(1 << 0)
+#define OTP_MRB_VREF_ADJUST_1			(1 << 1)
+#define OTP_MRB_VREF_ADJUST_3			(1 << 3)
+#define OTP_MRB_READ_TIMER_DELAY_CONTROL	(1 << 12)
+
+/*
+ * Programming pulse times. For the normal pulse, we use a programming time of
+ * 51.2uS. For a soak pulse where bits fail to program we use a 1mS pulse.
+ */
+#define OTP_NORMAL_PGM_PULSE_LENGTH		0x50
+#define OTP_SOAK_PGM_PULSE_LENGTH		0x61B
+
+enum otp_command {
+	OTP_COMMAND_IDLE,
+	OTP_COMMAND_WRITE,
+	OTP_COMMAND_PROGRAM,
+	OTP_COMMAND_READ,
+	OTP_COMMAND_WRITE_MR,
+	OTP_COMMAND_PRECHARGE,
+	OTP_COMMAND_COMPARE,
+	OTP_COMMAND_RESET,
+	OTP_COMMAND_RESET_M,
+	OTP_COMMAND_POWER_DOWN,
+	OTP_COMMAND_AUX_UPDATE_A,
+	OTP_COMMAND_AUX_UPDATE_B,
+	OTP_COMMAND_WRITE_PROGRAM,
+	OTP_COMMAND_WRITE_MRA,
+	OTP_COMMAND_WRITE_MRB,
+	OTP_COMMAND_RESET_MR,
+};
+
+#define PC3X3_OTP_WORD_SIZE		8
+
+/*
+ * The number of words in the OTP device. The device is 16K bytes and the word
+ * size is 64 bits.
+ */
+#define OTP_NUM_WORDS	    (SZ_16K / PC3X3_OTP_WORD_SIZE)
+
+/*
+ * The OTP device representation. We can have a static structure as there is
+ * only ever one OTP device in a system.
+ *
+ * @iomem: the io memory for the device that should be accessed with the I/O
+ *	accessors.
+ * @mem: the 16KB of OTP memory that can be accessed like normal memory. When
+ *	we probe, we force the __iomem away so we can read it directly.
+ * @test_mode_sr0, test_mode_sr2 the values of the special register when we're
+ *	in test mode.
+ */
+struct pc3x3_otp {
+	struct otp_device   *dev;
+	void __iomem	    *iomem;
+	void		    *mem;
+	struct clk	    *clk;
+	u64		    test_mode_sr0, test_mode_sr2;
+	unsigned long	    registered_regions;
+};
+
+static int pc3x3_otp_register_regions(struct pc3x3_otp *dev,
+				      bool need_unlocked);
+
+static inline void pc3x3_otp_write_reg(struct pc3x3_otp *otp, unsigned reg_num,
+				       u32 value)
+{
+	writel(value, otp->iomem + OTP_CTRL_BASE + reg_num);
+}
+
+static inline u32 pc3x3_otp_read_reg(struct pc3x3_otp *otp, unsigned reg_num)
+{
+	return readl(otp->iomem + OTP_CTRL_BASE + reg_num);
+}
+
+static inline u32 pc3x3_otp_read_sr(struct pc3x3_otp *otp)
+{
+	if (test_mode)
+		return otp->test_mode_sr0 | otp->test_mode_sr2;
+
+	return pc3x3_otp_read_reg(otp, OTP_MACRO_Q_SR_LO_REG_OFFSET);
+}
+
+/*
+ * Get the region format. The region format encoding and number of regions are
+ * encoded in the bottom 32 bis of the special register:
+ *
+ *  20: enable redundancy replacement.
+ *  [2:0]: AXI address mask - determines the number of address bits to use for
+ *  selecting the region to read from.
+ *  [m:n]: the format for region X where n := (X * 2) + 4 and m := n + 1.
+ */
+static enum otp_redundancy_fmt
+__pc3x3_otp_region_get_fmt(struct pc3x3_otp *otp,
+			   const struct otp_region *region)
+{
+	unsigned shift = (region->region_nr * 2) + 4;
+
+	return (pc3x3_otp_read_sr(otp) >> shift) & 0x3;
+}
+
+static enum otp_redundancy_fmt
+pc3x3_otp_region_get_fmt(struct otp_region *region)
+{
+	struct pc3x3_otp *otp = dev_get_drvdata(region->dev.parent);
+
+	return __pc3x3_otp_region_get_fmt(otp, region);
+}
+
+/*
+ * Find out how many regions the OTP is partitioned into. This can be 1, 2, 4
+ * or 8.
+ */
+static int pc3x3_otp_num_regions(struct pc3x3_otp *otp)
+{
+	u32 addr_mask;
+	int nr_regions;
+
+	addr_mask = pc3x3_otp_read_sr(otp) & SR_AXI_ADDRESS_MASK;
+
+	switch (addr_mask) {
+	case 0:
+		nr_regions = 1;
+		break;
+	case 4:
+		nr_regions = 2;
+		break;
+	case 6:
+		nr_regions = 4;
+		break;
+	case 7:
+		nr_regions = 8;
+		break;
+	default:
+		WARN(1, "invalid special register region mask\n");
+		nr_regions = -EINVAL;
+	}
+
+	return nr_regions;
+}
+
+/*
+ * Find the byte offset of the first word in the region from the base of the
+ * OTP.
+ */
+static unsigned pc3x3_otp_region_base(struct pc3x3_otp *otp,
+				      const struct otp_region *region)
+{
+	int num_regions = pc3x3_otp_num_regions(otp);
+	unsigned real_region_sz = SZ_16K / num_regions;
+
+	return (region->region_nr * real_region_sz) / PC3X3_OTP_WORD_SIZE;
+}
+
+static void pc3x3_otp_do_cmd(struct pc3x3_otp *otp, enum otp_command cmd)
+{
+	pc3x3_otp_write_reg(otp, OTP_MACRO_CMD_REG_OFFSET, cmd);
+	wmb();
+
+	/*
+	 * If we're talking to OTP then we need to wait for the command to
+	 * finish.
+	 */
+	if (!test_mode)
+		while (pc3x3_otp_read_reg(otp, OTP_MACRO_CMD_REG_OFFSET) !=
+		       OTP_COMMAND_IDLE)
+			cpu_relax();
+}
+
+/*
+ * Read a word from OTP.
+ *
+ * @addr the word address to read from.
+ * @val the destination to store the value in.
+ *
+ * Prerequisites: the OTP must be in single-ended read mode so that we can
+ * correctly read the raw word.
+ */
+static int pc3x3_otp_raw_read_word(struct pc3x3_otp *otp, unsigned addr,
+				   u64 *val)
+{
+	if (addr == SR_ADDRESS_0 && test_mode)
+		*val = otp->test_mode_sr0;
+	else if (addr == SR_ADDRESS_2 && test_mode)
+		*val = otp->test_mode_sr2;
+	else {
+		union {
+			u64 d64;
+			u32 d32[2];
+		} converter;
+
+		pc3x3_otp_write_reg(otp, OTP_MACRO_ADDR_REG_OFFSET, addr);
+		pc3x3_otp_do_cmd(otp, OTP_COMMAND_READ);
+
+		converter.d32[0] =
+			pc3x3_otp_read_reg(otp, OTP_MACRO_Q_LO_REG_OFFSET);
+		converter.d32[1] =
+			pc3x3_otp_read_reg(otp, OTP_MACRO_Q_HI_REG_OFFSET);
+
+		if (!test_mode)
+			*val = converter.d64;
+		else
+			memcpy(val, otp->mem + addr * sizeof(u64), sizeof(u64));
+	}
+
+	return 0;
+}
+
+/*
+ * Set the redundancy mode to a specific format. This only affects the
+ * readback through the AXI map and does not store the redundancy format in
+ * the special register.
+ */
+static void __pc3x3_otp_redundancy_mode_set(struct pc3x3_otp *otp,
+					    enum otp_redundancy_fmt fmt)
+{
+	u32 mr_lo = 0;
+
+	if (fmt == OTP_REDUNDANCY_FMT_REDUNDANT)
+		mr_lo |= OTP_MR_REDUNDANT_READ_MASK;
+	else if (fmt == OTP_REDUNDANCY_FMT_DIFFERENTIAL)
+		mr_lo |= OTP_MR_DIFFERENTIAL_READ_MASK;
+	else if (fmt == OTP_REDUNDANCY_FMT_DIFFERENTIAL_REDUNDANT)
+		mr_lo |= OTP_MR_REDUNDANT_READ_MASK |
+			 OTP_MR_DIFFERENTIAL_READ_MASK;
+
+	/* Load the data register with the new MR contents. */
+	pc3x3_otp_write_reg(otp, OTP_MACRO_D_LO_REG_OFFSET, mr_lo);
+	pc3x3_otp_write_reg(otp, OTP_MACRO_D_HI_REG_OFFSET, 0);
+
+	/* Write the MR and wait for the write to complete. */
+	pc3x3_otp_do_cmd(otp, OTP_COMMAND_WRITE_MR);
+}
+
+static int pc3x3_otp_redundancy_mode_set(struct otp_device *dev,
+					 enum otp_redundancy_fmt fmt)
+{
+	struct pc3x3_otp *otp = dev_get_drvdata(&dev->dev);
+
+	__pc3x3_otp_redundancy_mode_set(otp, fmt);
+
+	return 0;
+}
+
+#ifdef CONFIG_OTP_WRITE_ENABLE
+static void pc3x3_otp_write_MR(struct pc3x3_otp *otp, u32 value)
+{
+	/* Load the data register with the new contents. */
+	pc3x3_otp_write_reg(otp, OTP_MACRO_D_LO_REG_OFFSET, value);
+	pc3x3_otp_write_reg(otp, OTP_MACRO_D_HI_REG_OFFSET, 0);
+
+	/* Write the register and wait for the write to complete. */
+	pc3x3_otp_do_cmd(otp, OTP_COMMAND_WRITE_MR);
+}
+
+/*
+ * Create a write function for a given OTP auxillary mode register. This
+ * writes the auxillary mode register through the mode register then restores
+ * the contents of the mode register.
+ */
+#define OTP_REG_WRITE_FUNCTIONS(_name)					    \
+static void pc3x3_otp_write_##_name(struct pc3x3_otp *otp, u32 value)	    \
+{									    \
+	u32 mr = pc3x3_otp_read_reg(otp, OTP_MACRO_Q_MR_REG_OFFSET);	    \
+									    \
+	/* Load the data register with the new contents. */		    \
+	pc3x3_otp_write_reg(otp, OTP_MACRO_D_LO_REG_OFFSET, value);	    \
+	pc3x3_otp_write_reg(otp, OTP_MACRO_D_HI_REG_OFFSET, 0);		    \
+									    \
+	/* Write the register and wait for the write to complete. */	    \
+	pc3x3_otp_do_cmd(otp, OTP_COMMAND_WRITE_##_name);		    \
+									    \
+	/* Restore the original value of the MR. */			    \
+	pc3x3_otp_write_MR(otp, mr);					    \
+}
+
+OTP_REG_WRITE_FUNCTIONS(MRA);
+OTP_REG_WRITE_FUNCTIONS(MRB);
+
+/*
+ * Enable the charge pump. This monitors the VPP voltage and waits for it to
+ * reach the correct programming level.
+ *
+ * @enable set to non-zero to enable the charge pump, zero to disable it.
+ */
+static void pc3x3_otp_charge_pump_enable(struct pc3x3_otp *otp, int enable)
+{
+	u32 mra = enable ?
+		(OTP_MRA_CHARGE_PUMP_ENABLE_MASK |
+		 OTP_MRA_CHARGE_PUMP_MONITOR_MASK |
+		 OTP_MRA_READ_REFERENCE_LEVEL9_MASK |
+		 OTP_MRA_READ_REFERENCE_LEVEL5_MASK) : 0;
+
+	pc3x3_otp_write_MRA(otp, mra);
+
+	/* Now wait for VPP to reach the correct level. */
+	if (enable && !test_mode) {
+		while (!(pc3x3_otp_read_reg(otp, OTP_MACRO_STATUS_REG_OFFSET) &
+			 OTP_STATUS_VPP_APPLIED))
+			cpu_relax();
+	}
+
+	udelay(1);
+}
+
+/*
+ * Program a word of OTP to a raw address. This will program an absolute value
+ * into the OTP so if the current word needs to be modified then this needs to
+ * be done with a read-modify-write cycle with the read-modify handled above.
+ *
+ * The actual write operation can't fail here but we don't do any verification
+ * to make sure that the correct data got written. That must be handled by the
+ * layer above.
+ */
+static void pc3x3_otp_raw_program_word(struct pc3x3_otp *otp, unsigned addr,
+				       u64 v)
+{
+	unsigned bit_offs;
+	u64 tmp;
+	int set_to_program = addr & 1 ? 0 : 1;
+
+	if (test_mode) {
+		if (addr != SR_ADDRESS_0 && addr != SR_ADDRESS_2) {
+			u64 old;
+
+			if (pc3x3_otp_raw_read_word(otp, addr, &old))
+				return;
+
+			v = (addr & 1) ? old & ~v : old | v;
+
+			memcpy(otp->mem + (addr * PC3X3_OTP_WORD_SIZE), &v,
+			       sizeof(v));
+		} else {
+			/*
+			 * The special register OTP values are stored in the
+			 * boot rows that live outside of the 16KB of normal
+			 * OTP so we can't address them directly.
+			 */
+			if (addr == SR_ADDRESS_0)
+				otp->test_mode_sr0 |= v;
+			else
+				otp->test_mode_sr2 |= v;
+		}
+	}
+
+	/* Set the address of the word that we're writing. */
+	pc3x3_otp_write_reg(otp, OTP_MACRO_ADDR_REG_OFFSET, addr);
+
+	for (bit_offs = 0; v && bit_offs < 64; ++bit_offs, v >>= 1) {
+		if (!(v & 0x1))
+			continue;
+
+		tmp = set_to_program ? ~(1LLU << bit_offs) :
+			(1LLU << bit_offs);
+		pc3x3_otp_write_reg(otp, OTP_MACRO_D_LO_REG_OFFSET,
+				(u32)tmp & 0xFFFFFFFF);
+		pc3x3_otp_write_reg(otp, OTP_MACRO_D_HI_REG_OFFSET,
+				(u32)(tmp >> 32) & 0xFFFFFFFF);
+
+		/* Start programming the bit and wait for it to complete. */
+		pc3x3_otp_do_cmd(otp, OTP_COMMAND_WRITE_PROGRAM);
+	}
+}
+
+static inline void pc3x3_otp_set_program_pulse_len(struct pc3x3_otp *otp,
+						   unsigned len)
+{
+	u32 v = pc3x3_otp_read_reg(otp, OTP_MACRO_TIME_PGM_REG_OFFSET);
+	v &= ~OTP_TIME_PGM_PULSE_MASK;
+	v |= len;
+	pc3x3_otp_write_reg(otp, OTP_MACRO_TIME_PGM_REG_OFFSET, v);
+}
+
+/*
+ * Write a raw word in OTP. This will program a word into OTP memory and do
+ * any read-modify-write that is necessary. For example if address 0 contains
+ * 0x00ef, then writing 0xbe00 will result in address 0 containing 0xbeef.
+ * This does not handle redundancy - this should be done at a higher level.
+ *
+ * @addr the word address to write to.
+ * @val the value to program into the OTP.
+ *
+ * Prerequisites: the OTP must be in single-ended read mode so that we can
+ * correctly verify the word.
+ */
+static int pc3x3_otp_raw_write_word(struct pc3x3_otp *otp, unsigned addr,
+				    u64 val)
+{
+	/*
+	 * We program even addresses by setting 0 bits to one and programm odd
+	 * addresses by clearing 1 bits to 0.
+	 */
+	int set_to_program = addr & 1 ? 0 : 1;
+	int retries = 0, err = 0;
+	u64 orig, v;
+
+	if (pc3x3_otp_raw_read_word(otp, addr, &orig))
+		return -EIO;
+
+	v = set_to_program ? val & ~orig : ~val & orig;
+
+	/*
+	 * Enable the charge pump and configure initial timing to begin
+	 * programming.
+	 */
+	pc3x3_otp_charge_pump_enable(otp, 1);
+	pc3x3_otp_write_MRB(otp, OTP_MRB_VREF_ADJUST_3 |
+				 OTP_MRB_READ_TIMER_DELAY_CONTROL);
+	pc3x3_otp_write_MR(otp, OTP_MR_SELF_TIMING |
+				OTP_MR_PROGRAMMABLE_DELAY |
+				OTP_MR_PROGRAMMABLE_DELAY_CONTROL);
+	pc3x3_otp_raw_program_word(otp, addr, v);
+	udelay(1);
+
+	while (retries < MAX_PROGRAM_RETRIES) {
+		/* Update orig so we only reprogram the unprogrammed bits. */
+		if (pc3x3_otp_raw_read_word(otp, addr, &orig)) {
+			err = -EIO;
+			break;
+		}
+
+		/* If we've programmed correctly we have nothing else to do. */
+		if (val == orig) {
+			err = 0;
+			break;
+		}
+
+		/* Reset the mode register. */
+		pc3x3_otp_write_MRB(otp, OTP_MRB_VREF_ADJUST_0 |
+					 OTP_MRB_VREF_ADJUST_1 |
+					 OTP_MRB_VREF_ADJUST_3 |
+					 OTP_MRB_READ_TIMER_DELAY_CONTROL);
+		pc3x3_otp_do_cmd(otp, OTP_COMMAND_RESET_MR);
+
+		/* Increase the programming pulse length. */
+		pc3x3_otp_set_program_pulse_len(otp, OTP_SOAK_PGM_PULSE_LENGTH);
+
+		/* Work out the failed bits. */
+		v = set_to_program ? val & ~orig : ~val & orig;
+		pc3x3_otp_raw_program_word(otp, addr, v);
+
+		/* Restore the programming pulse length. */
+		pc3x3_otp_set_program_pulse_len(otp,
+						OTP_NORMAL_PGM_PULSE_LENGTH);
+
+		/* Update orig so we only reprogram the unprogrammed bits. */
+		if (pc3x3_otp_raw_read_word(otp, addr, &orig)) {
+			err = -EIO;
+			break;
+		}
+
+		/* If we've programmed correctly we have nothing else to do. */
+		if (val == orig) {
+			err = 0;
+			break;
+		}
+
+		pc3x3_otp_write_MRB(otp, OTP_MRB_VREF_ADJUST_3 |
+					 OTP_MRB_READ_TIMER_DELAY_CONTROL);
+		pc3x3_otp_write_MR(otp, OTP_MR_SELF_TIMING |
+					OTP_MR_PROGRAMMABLE_DELAY |
+					OTP_MR_PROGRAMMABLE_DELAY_CONTROL);
+		udelay(1);
+		++retries;
+	}
+
+	/* Disable the charge pump. We're done now. */
+	pc3x3_otp_charge_pump_enable(otp, 0);
+	pc3x3_otp_write_MRB(otp, 0);
+	pc3x3_otp_write_MRA(otp, 0);
+	pc3x3_otp_do_cmd(otp, OTP_COMMAND_RESET_MR);
+
+	if (!err && retries >= MAX_PROGRAM_RETRIES) {
+		dev_warn(&otp->dev->dev,
+			 "writing to raw address %x failed to program after %d attempts\n",
+			 addr, MAX_PROGRAM_RETRIES);
+		err = -EBADMSG;
+	}
+
+	return err;
+}
+
+/*
+ * Write a data word to an OTP region. The value will be used in a
+ * read-modify-write cycle to ensure that bits can't be flipped if they have
+ * already programmed (the hardware isn't capable of this). This also takes
+ * into account the redundancy addressing and formatting.
+ */
+static int pc3x3_otp_write_word(struct otp_device *otp_dev,
+				struct otp_region *region, unsigned long addr,
+				u64 word)
+{
+	struct pc3x3_otp *otp = otp_dev_get_drvdata(otp_dev);
+	enum otp_redundancy_fmt fmt = __pc3x3_otp_region_get_fmt(otp, region);
+	unsigned i, num_words, raw_addresses[4];
+	u64 result;
+	int err = 0;
+
+	/* Enter the single-ended read mode. */
+	__pc3x3_otp_redundancy_mode_set(otp, OTP_REDUNDANCY_FMT_SINGLE_ENDED);
+
+	/*
+	 * Work out what raw addresses and values we need to write into the
+	 * OTP to make sure that the value we want gets read back out
+	 * correctly.
+	 */
+	switch (fmt) {
+	case OTP_REDUNDANCY_FMT_SINGLE_ENDED:
+		num_words	    = 1;
+		raw_addresses[0]    = pc3x3_otp_region_base(otp, region) + addr;
+		break;
+
+	case OTP_REDUNDANCY_FMT_REDUNDANT:
+		num_words	    = 2;
+		raw_addresses[0]    = pc3x3_otp_region_base(otp, region) +
+				      (((addr & 0xFFFE) << 1) | (addr & 1));
+		raw_addresses[1]    = pc3x3_otp_region_base(otp, region) +
+				      (((addr & 0xFFFE) << 1) | (addr & 1) | 2);
+		break;
+
+	case OTP_REDUNDANCY_FMT_DIFFERENTIAL:
+		num_words	    = 2;
+		raw_addresses[0]    = pc3x3_otp_region_base(otp, region) +
+				      (((addr & 0xFFFF) << 1));
+		raw_addresses[1]    = pc3x3_otp_region_base(otp, region) +
+				      (((addr & 0xFFFF) << 1) | 1);
+		break;
+
+	case OTP_REDUNDANCY_FMT_DIFFERENTIAL_REDUNDANT:
+		num_words	    = 4;
+		raw_addresses[0]    = pc3x3_otp_region_base(otp, region) +
+				      ((addr & 0xFFFF) << 2);
+		raw_addresses[1]    = pc3x3_otp_region_base(otp, region) +
+				      (((addr & 0xFFFF) << 2) | 0x1);
+		raw_addresses[2]    = pc3x3_otp_region_base(otp, region) +
+				      (((addr & 0xFFFF) << 2) | 0x2);
+		raw_addresses[3]    = pc3x3_otp_region_base(otp, region) +
+				      (((addr & 0xFFFF) << 2) | 0x3);
+		break;
+
+	default:
+		err = -EINVAL;
+		goto out;
+	}
+
+	/*
+	 * Verify the raw words. If we are doing strict programming then they
+	 * must all program correctly. If we aren't doing strict programming
+	 * then allow failures to 'slip through' for now. If the word can be
+	 * read back correctly in the redundant mode then that's fine with the
+	 * user.
+	 */
+	for (i = 0; i < num_words; ++i)
+		err = pc3x3_otp_raw_write_word(otp, raw_addresses[i], word);
+		if (err && otp_strict_programming_enabled(otp->dev))
+			goto out;
+
+	/* Go back to the real redundancy mode and verify the whole word. */
+	__pc3x3_otp_redundancy_mode_set(otp, fmt);
+
+	if (otp_dev->ops->read_word(otp_dev, region, addr, &result)) {
+		err = -EIO;
+		goto out;
+	}
+
+	/*
+	 * Now check that the word has been correctly programmed with the
+	 * region formatting.
+	 */
+	if (result == word) {
+		err = 0;
+	} else {
+		dev_warn(&region->dev,
+			 "word at address %lx write failed %llx != %llx (result != expected)\n",
+			 addr, result, word);
+		err = -EBADMSG;
+	}
+
+out:
+	return err;
+}
+
+/*
+ * Write the special register. In PC3X3, we only use the lower 32 bits of the
+ * SR to indicate the partitioning and the region formats so we do a
+ * read-modify-write of the whole 64 bit value.
+ */
+static int pc3x3_otp_write_sr(struct pc3x3_otp *otp, u32 sr_lo)
+{
+	if (pc3x3_otp_raw_write_word(otp, SR_ADDRESS_0, sr_lo)) {
+		dev_warn(&otp->dev->dev,
+			 "failed to write special register (word 0)\n");
+		return -EIO;
+	}
+
+	if (pc3x3_otp_raw_write_word(otp, SR_ADDRESS_2, sr_lo)) {
+		dev_warn(&otp->dev->dev,
+			 "failed to write special register (word 0)\n");
+		return -EIO;
+	}
+
+	/*
+	 * Reset the OTP so that when we read the special register again we
+	 * get the value that we've just written.
+	 */
+	pc3x3_otp_do_cmd(otp, OTP_COMMAND_RESET);
+
+	return 0;
+}
+
+static int pc3x3_otp_region_set_fmt(struct otp_region *region,
+				    enum otp_redundancy_fmt new_fmt)
+{
+	int err;
+	struct pc3x3_otp *otp = dev_get_drvdata(region->dev.parent);
+	enum otp_redundancy_fmt fmt = __pc3x3_otp_region_get_fmt(otp, region);
+	unsigned shift = (region->region_nr * 2) + 4;
+	unsigned long sr;
+
+	/*
+	 * We can't clear format bits so we can only do certain transitions.
+	 * It is possible to go from redundant to differential-redundant or
+	 * differential to differential redundant but if the region is already
+	 * programmed this could give unexpected results. However, the user
+	 * _might_ know what they're doing.
+	 */
+	if (fmt & ~new_fmt) {
+		err = -EINVAL;
+		goto out;
+	}
+	if (fmt == new_fmt) {
+		err = 0;
+		goto out;
+	}
+
+	sr = pc3x3_otp_read_sr(otp);
+	sr |= new_fmt << shift;
+	err = pc3x3_otp_write_sr(otp, sr);
+
+out:
+	return err;
+}
+
+static int pc3x3_otp_set_nr_regions(struct otp_device *dev, int nr_regions)
+{
+	struct pc3x3_otp *otp = dev_get_drvdata(&dev->dev);
+	unsigned long sr = pc3x3_otp_read_sr(otp);
+	u32 new_mask, addr_mask = sr & SR_AXI_ADDRESS_MASK;
+	int err = 0;
+
+	switch (nr_regions) {
+	case 1:
+		new_mask = 0;
+		break;
+	case 2:
+		new_mask = 4;
+		break;
+	case 4:
+		new_mask = 6;
+		break;
+	case 8:
+		new_mask = 7;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * Check that we aren't trying to clear any bits and reduce the number
+	 * of regions. This is OTP so we can only increase.
+	 */
+	if (addr_mask & ~new_mask)
+		return -EINVAL;
+
+	if (addr_mask == new_mask)
+		return 0;
+
+	err = pc3x3_otp_write_sr(otp, sr | new_mask);
+	if (err)
+		return err;
+
+	return pc3x3_otp_register_regions(otp, true);
+}
+#else /* CONFIG_OTP_WRITE_ENABLE */
+#define pc3x3_otp_region_set_fmt	NULL
+#define pc3x3_otp_write_word		NULL
+#define pc3x3_otp_set_nr_regions	NULL
+#endif /* CONFIG_OTP_WRITE_ENABLE */
+
+/*
+ * Read a word from a specificied OTP region. The address is the user address
+ * for the word to be read and should not take the redundancy into account.
+ */
+static int pc3x3_otp_read_word(struct otp_device *otp_dev,
+			       struct otp_region *region, unsigned long addr,
+			       u64 *word)
+{
+	struct pc3x3_otp *otp = otp_dev_get_drvdata(otp_dev);
+	enum otp_redundancy_fmt fmt = __pc3x3_otp_region_get_fmt(otp, region);
+	unsigned num_words, raw_addresses[4];
+	u64 result = 0, raw_values[4];
+	int err = 0;
+
+	/* Enter the single-ended read mode. */
+	__pc3x3_otp_redundancy_mode_set(otp, OTP_REDUNDANCY_FMT_SINGLE_ENDED);
+
+	/*
+	 * If we're running with real OTP then the read is simple, just copy
+	 * it from the AXI map.
+	 */
+	if (!test_mode) {
+		memcpy(word,
+		       otp->mem + (pc3x3_otp_region_base(otp, region) + addr) *
+		       PC3X3_OTP_WORD_SIZE, sizeof(*word));
+		return 0;
+	}
+
+	/*
+	 * If we're in test mode then this is slightly more complicated. We
+	 * need to decode the address into the raw address(s) that the block
+	 * uses and handle the redundancy format. This allows us to test that
+	 * we've programmed all of the redundant words in the correct format.
+	 */
+	switch (fmt) {
+	case OTP_REDUNDANCY_FMT_SINGLE_ENDED:
+		num_words	    = 1;
+		raw_addresses[0]    = pc3x3_otp_region_base(otp, region) + addr;
+		pc3x3_otp_raw_read_word(otp, raw_addresses[0], &raw_values[0]);
+		result = raw_values[0];
+		break;
+
+	case OTP_REDUNDANCY_FMT_REDUNDANT:
+		num_words	    = 2;
+		raw_addresses[0]    = pc3x3_otp_region_base(otp, region) +
+				      (((addr & 0xFFFE) << 1) | (addr & 1));
+		raw_addresses[1]    = pc3x3_otp_region_base(otp, region) +
+				      (((addr & 0xFFFE) << 1) | (addr & 1) | 2);
+		pc3x3_otp_raw_read_word(otp, raw_addresses[0], &raw_values[0]);
+		pc3x3_otp_raw_read_word(otp, raw_addresses[1], &raw_values[1]);
+		result = raw_values[0] | raw_values[1];
+		break;
+
+	case OTP_REDUNDANCY_FMT_DIFFERENTIAL:
+		num_words	    = 2;
+		raw_addresses[0]    = pc3x3_otp_region_base(otp, region) +
+				      (((addr & 0xFFFF) << 1));
+		raw_addresses[1]    = pc3x3_otp_region_base(otp, region) +
+				      (((addr & 0xFFFF) << 1) | 1);
+		pc3x3_otp_raw_read_word(otp, raw_addresses[0], &raw_values[0]);
+		pc3x3_otp_raw_read_word(otp, raw_addresses[1], &raw_values[1]);
+		result = raw_values[0] | ~raw_values[1];
+		break;
+
+	case OTP_REDUNDANCY_FMT_DIFFERENTIAL_REDUNDANT:
+		num_words	    = 4;
+		raw_addresses[0]    = pc3x3_otp_region_base(otp, region) +
+				      ((addr & 0xFFFF) << 2);
+		raw_addresses[1]    = pc3x3_otp_region_base(otp, region) +
+				      (((addr & 0xFFFF) << 2) | 0x1);
+		raw_addresses[2]    = pc3x3_otp_region_base(otp, region) +
+				      (((addr & 0xFFFF) << 2) | 0x2);
+		raw_addresses[3]    = pc3x3_otp_region_base(otp, region) +
+				      (((addr & 0xFFFF) << 2) | 0x3);
+		pc3x3_otp_raw_read_word(otp, raw_addresses[0], &raw_values[0]);
+		pc3x3_otp_raw_read_word(otp, raw_addresses[1], &raw_values[1]);
+		pc3x3_otp_raw_read_word(otp, raw_addresses[2], &raw_values[2]);
+		pc3x3_otp_raw_read_word(otp, raw_addresses[3], &raw_values[3]);
+		result = (raw_values[0] | ~raw_values[1]) |
+			 (raw_values[2] | ~raw_values[3]);
+		break;
+
+	default:
+		err = -EINVAL;
+	}
+
+	if (!err)
+		*word = result;
+
+	return err;
+}
+
+/*
+ * Find out how big the region is. We have a 16KB device which can be split
+ * equally into 1, 2, 4 or 8 regions. If a partition is redundant or
+ * differential redundancy then this is 2 bits of storage per data bit so half
+ * the size. For differential-redundant redundancy, 1 bit of data takes 4 bits
+ * of storage so divide by 4.
+ */
+static ssize_t pc3x3_otp_region_get_size(struct otp_region *region)
+{
+	struct pc3x3_otp *otp = dev_get_drvdata(region->dev.parent);
+	int num_regions = pc3x3_otp_num_regions(otp);
+	enum otp_redundancy_fmt fmt = __pc3x3_otp_region_get_fmt(otp, region);
+	ssize_t region_sz;
+
+	region_sz = (SZ_16K / num_regions);
+	if (OTP_REDUNDANCY_FMT_REDUNDANT == fmt ||
+	    OTP_REDUNDANCY_FMT_DIFFERENTIAL == fmt)
+		region_sz /= 2;
+	else if (fmt == OTP_REDUNDANCY_FMT_DIFFERENTIAL_REDUNDANT)
+		region_sz /= 4;
+
+	return region_sz;
+}
+
+static const struct otp_region_ops pc3x3_region_ops = {
+	.set_fmt	= pc3x3_otp_region_set_fmt,
+	.get_fmt	= pc3x3_otp_region_get_fmt,
+	.get_size	= pc3x3_otp_region_get_size,
+};
+
+static int pc3x3_otp_register_regions(struct pc3x3_otp *dev,
+				      bool need_unlocked)
+{
+	struct otp_device *otp = dev->dev;
+	int err = 0, i, nr_regions = otp->ops->get_nr_regions(otp);
+
+	for (i = 0; i < nr_regions; ++i) {
+		struct otp_region *region;
+
+		if (test_and_set_bit(i, &dev->registered_regions))
+			continue;
+
+		region = need_unlocked ?
+			otp_region_alloc_unlocked(otp, &pc3x3_region_ops, i,
+						  "region%d", i) :
+			otp_region_alloc(otp, &pc3x3_region_ops, i,
+					 "region%d", i);
+		if (IS_ERR(region)) {
+			err = PTR_ERR(region);
+			break;
+		}
+	}
+
+	return err;
+}
+
+static ssize_t pc3x3_otp_get_nr_regions(struct otp_device *dev)
+{
+	struct pc3x3_otp *otp = dev_get_drvdata(&dev->dev);
+	unsigned long sr = pc3x3_otp_read_sr(otp);
+	u32 addr_mask = sr & SR_AXI_ADDRESS_MASK;
+
+	if (0 == addr_mask)
+		return 1;
+	else if (4 == addr_mask)
+		return 2;
+	else if (6 == addr_mask)
+		return 4;
+	else if (7 == addr_mask)
+		return 8;
+
+	return -EINVAL;
+}
+
+static const struct otp_device_ops pc3x3_otp_ops = {
+	.name		= "PC3X3",
+	.owner		= THIS_MODULE,
+	.get_nr_regions	= pc3x3_otp_get_nr_regions,
+	.set_nr_regions	= pc3x3_otp_set_nr_regions,
+	.set_fmt	= pc3x3_otp_redundancy_mode_set,
+	.write_word	= pc3x3_otp_write_word,
+	.read_word	= pc3x3_otp_read_word,
+};
+
+static int __devinit pc3x3_otp_probe(struct platform_device *pdev)
+{
+	int err;
+	struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct otp_device *otp;
+	struct pc3x3_otp *pc3x3_dev;
+
+	if (!mem) {
+		dev_err(&pdev->dev, "no i/o memory\n");
+		return -ENXIO;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev, mem->start,
+				     resource_size(mem), "otp")) {
+		dev_err(&pdev->dev, "unable to request i/o memory\n");
+		return -EBUSY;
+	}
+
+	pc3x3_dev = devm_kzalloc(&pdev->dev, sizeof(*pc3x3_dev), GFP_KERNEL);
+	if (!pc3x3_dev)
+		return -ENOMEM;
+
+	if (test_mode) {
+		u64 *p = devm_kzalloc(&pdev->dev, SZ_16K + SZ_1K, GFP_KERNEL);
+		int i;
+
+		if (!p) {
+			err = -ENOMEM;
+			goto out;
+		}
+
+		pc3x3_dev->mem = p;
+		pc3x3_dev->iomem = (void __force __iomem *)p;
+
+		for (i = 0; (u8 *)p < (u8 *)pc3x3_dev->mem + SZ_16K + SZ_1K;
+		     ++p, ++i)
+			*p = (i & 1) ? ~0LLU : 0LLU;
+	} else {
+		pc3x3_dev->iomem = devm_ioremap(&pdev->dev, mem->start,
+						resource_size(mem));
+		if (!pc3x3_dev->iomem) {
+			err = -ENOMEM;
+			goto out;
+		}
+		pc3x3_dev->mem = (void __force *)pc3x3_dev->iomem;
+	}
+
+	pc3x3_dev->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pc3x3_dev->clk)) {
+		dev_err(&pdev->dev, "device has no clk\n");
+		err = PTR_ERR(pc3x3_dev->clk);
+		goto out;
+	}
+	clk_enable(pc3x3_dev->clk);
+
+	otp = otp_device_alloc(&pdev->dev, &pc3x3_otp_ops, SZ_16K, 8, 8, 0);
+	if (IS_ERR(otp)) {
+		err = PTR_ERR(otp);
+		goto out_clk_disable;
+	}
+	otp_dev_set_drvdata(otp, pc3x3_dev);
+
+	pc3x3_dev->dev = otp;
+	platform_set_drvdata(pdev, pc3x3_dev);
+
+	err = pc3x3_otp_register_regions(pc3x3_dev, false);
+	if (err)
+		goto out_unregister;
+
+	goto out;
+
+out_unregister:
+	otp_device_unregister(otp);
+out_clk_disable:
+	clk_disable(pc3x3_dev->clk);
+	clk_put(pc3x3_dev->clk);
+out:
+	return err;
+}
+
+static int __devexit pc3x3_otp_remove(struct platform_device *pdev)
+{
+	struct pc3x3_otp *otp = platform_get_drvdata(pdev);
+
+	otp_device_unregister(otp->dev);
+	clk_disable(otp->clk);
+	clk_put(otp->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pc3x3_otp_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pc3x3_otp *otp = platform_get_drvdata(pdev);
+
+	pc3x3_otp_write_reg(otp, OTP_MACRO_CMD_REG_OFFSET,
+			    OTP_COMMAND_POWER_DOWN);
+	clk_disable(otp->clk);
+
+	return 0;
+}
+
+static int pc3x3_otp_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pc3x3_otp *otp = platform_get_drvdata(pdev);
+
+	clk_enable(otp->clk);
+	pc3x3_otp_write_reg(otp, OTP_MACRO_CMD_REG_OFFSET, OTP_COMMAND_IDLE);
+
+	return 0;
+}
+
+static const struct dev_pm_ops pc3x3_otp_pm_ops = {
+	.suspend	= pc3x3_otp_suspend,
+	.resume		= pc3x3_otp_resume,
+};
+#endif /* CONFIG_PM */
+
+static struct platform_driver pc3x3_otp_driver = {
+	.probe		= pc3x3_otp_probe,
+	.remove		= __devexit_p(pc3x3_otp_remove),
+	.driver		= {
+		.name	= "picoxcell-otp-pc3x3",
+#ifdef CONFIG_PM
+		.pm	= &pc3x3_otp_pm_ops,
+#endif /* CONFIG_PM */
+	},
+};
+
+static int __init pc3x3_otp_init(void)
+{
+	return platform_driver_register(&pc3x3_otp_driver);
+}
+module_init(pc3x3_otp_init);
+
+static void __exit pc3x3_otp_exit(void)
+{
+	platform_driver_unregister(&pc3x3_otp_driver);
+}
+module_exit(pc3x3_otp_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jamie Iles");
+MODULE_DESCRIPTION("OTP memory driver for Picochip PC3X3 devices");
-- 
1.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists