| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20110330085913.5897.52373.stgit@localhost.localdomain>
Date: Wed, 30 Mar 2011 09:59:17 +0100
From: Alan Cox <alan@...ux.intel.com>
To: greg@...ah.com, linux-kernel@...r.kernel.org
Subject: [PATCH 02/18] gma500: Add moorestown lvds driver code
Add the new files needed for the GMA500 driver to support Moorestown LVDS
displays. Don't wire them in yet.
Signed-off-by: Alan Cox <alan@...ux.intel.com>
---
drivers/staging/gma500/mrst_crtc.c | 623 ++++++++++++++++++++++++++++++++++++
drivers/staging/gma500/mrst_lvds.c | 364 +++++++++++++++++++++
2 files changed, 987 insertions(+), 0 deletions(-)
create mode 100644 drivers/staging/gma500/mrst_crtc.c
create mode 100644 drivers/staging/gma500/mrst_lvds.c
diff --git a/drivers/staging/gma500/mrst_crtc.c b/drivers/staging/gma500/mrst_crtc.c
new file mode 100644
index 0000000..89b9cac
--- /dev/null
+++ b/drivers/staging/gma500/mrst_crtc.c
@@ -0,0 +1,623 @@
+/*
+ * Copyright © 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/pm_runtime.h>
+
+#include <drm/drmP.h>
+#include "psb_fb.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "psb_intel_display.h"
+#include "psb_powermgmt.h"
+
+struct psb_intel_range_t {
+ int min, max;
+};
+
+struct mrst_limit_t {
+ struct psb_intel_range_t dot, m, p1;
+};
+
+struct mrst_clock_t {
+ /* derived values */
+ int dot;
+ int m;
+ int p1;
+};
+
+#define MRST_LIMIT_LVDS_100L 0
+#define MRST_LIMIT_LVDS_83 1
+#define MRST_LIMIT_LVDS_100 2
+
+#define MRST_DOT_MIN 19750
+#define MRST_DOT_MAX 120000
+#define MRST_M_MIN_100L 20
+#define MRST_M_MIN_100 10
+#define MRST_M_MIN_83 12
+#define MRST_M_MAX_100L 34
+#define MRST_M_MAX_100 17
+#define MRST_M_MAX_83 20
+#define MRST_P1_MIN 2
+#define MRST_P1_MAX_0 7
+#define MRST_P1_MAX_1 8
+
+static const struct mrst_limit_t mrst_limits[] = {
+ { /* MRST_LIMIT_LVDS_100L */
+ .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
+ .m = {.min = MRST_M_MIN_100L, .max = MRST_M_MAX_100L},
+ .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1},
+ },
+ { /* MRST_LIMIT_LVDS_83L */
+ .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
+ .m = {.min = MRST_M_MIN_83, .max = MRST_M_MAX_83},
+ .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_0},
+ },
+ { /* MRST_LIMIT_LVDS_100 */
+ .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
+ .m = {.min = MRST_M_MIN_100, .max = MRST_M_MAX_100},
+ .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1},
+ },
+};
+
+#define MRST_M_MIN 10
+static const u32 mrst_m_converts[] = {
+ 0x2B, 0x15, 0x2A, 0x35, 0x1A, 0x0D, 0x26, 0x33, 0x19, 0x2C,
+ 0x36, 0x3B, 0x1D, 0x2E, 0x37, 0x1B, 0x2D, 0x16, 0x0B, 0x25,
+ 0x12, 0x09, 0x24, 0x32, 0x39, 0x1c,
+};
+
+static const struct mrst_limit_t *mrst_limit(struct drm_crtc *crtc)
+{
+ const struct mrst_limit_t *limit = NULL;
+ struct drm_device *dev = crtc->dev;
+ DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
+
+ if (psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)
+ || psb_intel_pipe_has_type(crtc, INTEL_OUTPUT_MIPI)) {
+ switch (dev_priv->core_freq) {
+ case 100:
+ limit = &mrst_limits[MRST_LIMIT_LVDS_100L];
+ break;
+ case 166:
+ limit = &mrst_limits[MRST_LIMIT_LVDS_83];
+ break;
+ case 200:
+ limit = &mrst_limits[MRST_LIMIT_LVDS_100];
+ break;
+ }
+ } else {
+ limit = NULL;
+ PSB_DEBUG_ENTRY("mrst_limit Wrong display type.\n");
+ }
+
+ return limit;
+}
+
+/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
+static void mrst_clock(int refclk, struct mrst_clock_t *clock)
+{
+ clock->dot = (refclk * clock->m) / (14 * clock->p1);
+}
+
+void mrstPrintPll(char *prefix, struct mrst_clock_t *clock)
+{
+ PSB_DEBUG_ENTRY("%s: dotclock = %d, m = %d, p1 = %d.\n",
+ prefix, clock->dot, clock->m, clock->p1);
+}
+
+/**
+ * Returns a set of divisors for the desired target clock with the given refclk,
+ * or FALSE. Divisor values are the actual divisors for
+ */
+static bool
+mrstFindBestPLL(struct drm_crtc *crtc, int target, int refclk,
+ struct mrst_clock_t *best_clock)
+{
+ struct mrst_clock_t clock;
+ const struct mrst_limit_t *limit = mrst_limit(crtc);
+ int err = target;
+
+ memset(best_clock, 0, sizeof(*best_clock));
+
+ for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
+ for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max;
+ clock.p1++) {
+ int this_err;
+
+ mrst_clock(refclk, &clock);
+
+ this_err = abs(clock.dot - target);
+ if (this_err < err) {
+ *best_clock = clock;
+ err = this_err;
+ }
+ }
+ }
+ DRM_DEBUG("mrstFindBestPLL err = %d.\n", err);
+
+ return err != target;
+}
+
+/**
+ * Sets the power management mode of the pipe and plane.
+ *
+ * This code should probably grow support for turning the cursor off and back
+ * on appropriately at the same time as we're turning the pipe off/on.
+ */
+static void mrst_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ int pipe = psb_intel_crtc->pipe;
+ int dpll_reg = (pipe == 0) ? MRST_DPLL_A : DPLL_B;
+ int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+ int dspbase_reg = (pipe == 0) ? MRST_DSPABASE : DSPBBASE;
+ int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+ u32 temp;
+ bool enabled;
+
+ PSB_DEBUG_ENTRY("mode = %d, pipe = %d\n", mode, pipe);
+
+ if (!ospm_power_using_hw_begin(OSPM_DISPLAY_ISLAND,
+ OSPM_UHB_FORCE_POWER_ON))
+ return;
+
+ /* XXX: When our outputs are all unaware of DPMS modes other than off
+ * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+ */
+ switch (mode) {
+ case DRM_MODE_DPMS_ON:
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
+ /* Enable the DPLL */
+ temp = REG_READ(dpll_reg);
+ if ((temp & DPLL_VCO_ENABLE) == 0) {
+ REG_WRITE(dpll_reg, temp);
+ REG_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
+ REG_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ REG_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
+ REG_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+ }
+ /* Enable the pipe */
+ temp = REG_READ(pipeconf_reg);
+ if ((temp & PIPEACONF_ENABLE) == 0)
+ REG_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
+ /* Enable the plane */
+ temp = REG_READ(dspcntr_reg);
+ if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+ REG_WRITE(dspcntr_reg,
+ temp | DISPLAY_PLANE_ENABLE);
+ /* Flush the plane changes */
+ REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
+ }
+
+ psb_intel_crtc_load_lut(crtc);
+
+ /* Give the overlay scaler a chance to enable
+ if it's on this pipe */
+ /* psb_intel_crtc_dpms_video(crtc, true); TODO */
+ break;
+ case DRM_MODE_DPMS_OFF:
+ /* Give the overlay scaler a chance to disable
+ * if it's on this pipe */
+ /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
+
+ /* Disable the VGA plane that we never use */
+ REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+ /* Disable display plane */
+ temp = REG_READ(dspcntr_reg);
+ if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+ REG_WRITE(dspcntr_reg,
+ temp & ~DISPLAY_PLANE_ENABLE);
+ /* Flush the plane changes */
+ REG_WRITE(dspbase_reg, REG_READ(dspbase_reg));
+ REG_READ(dspbase_reg);
+ }
+
+ /* Next, disable display pipes */
+ temp = REG_READ(pipeconf_reg);
+ if ((temp & PIPEACONF_ENABLE) != 0) {
+ REG_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
+ REG_READ(pipeconf_reg);
+ }
+ /* Wait for for the pipe disable to take effect. */
+ psb_intel_wait_for_vblank(dev);
+
+ temp = REG_READ(dpll_reg);
+ if ((temp & DPLL_VCO_ENABLE) != 0) {
+ REG_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
+ REG_READ(dpll_reg);
+ }
+
+ /* Wait for the clocks to turn off. */
+ udelay(150);
+ break;
+ }
+
+ enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
+
+ /*Set FIFO Watermarks*/
+ REG_WRITE(DSPARB, 0x3FFF);
+ REG_WRITE(DSPFW1, 0x3F88080A);
+ REG_WRITE(DSPFW2, 0x0b060808);
+ REG_WRITE(DSPFW3, 0x0);
+ REG_WRITE(DSPFW4, 0x08030404);
+ REG_WRITE(DSPFW5, 0x04040404);
+ REG_WRITE(DSPFW6, 0x78);
+ REG_WRITE(0x70400, REG_READ(0x70400) | 0x4000);
+ /* Must write Bit 14 of the Chicken Bit Register */
+
+ ospm_power_using_hw_end(OSPM_DISPLAY_ISLAND);
+}
+
+/**
+ * Return the pipe currently connected to the panel fitter,
+ * or -1 if the panel fitter is not present or not in use
+ */
+static int mrst_panel_fitter_pipe(struct drm_device *dev)
+{
+ u32 pfit_control;
+
+ pfit_control = REG_READ(PFIT_CONTROL);
+
+ /* See if the panel fitter is in use */
+ if ((pfit_control & PFIT_ENABLE) == 0)
+ return -1;
+ return (pfit_control >> 29) & 3;
+}
+
+static int mrst_crtc_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct drm_device *dev = crtc->dev;
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
+ int pipe = psb_intel_crtc->pipe;
+ int fp_reg = (pipe == 0) ? MRST_FPA0 : FPB0;
+ int dpll_reg = (pipe == 0) ? MRST_DPLL_A : DPLL_B;
+ int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+ int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+ int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
+ int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
+ int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
+ int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
+ int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
+ int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
+ int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
+ int refclk = 0;
+ struct mrst_clock_t clock;
+ u32 dpll = 0, fp = 0, dspcntr, pipeconf;
+ bool ok, is_sdvo = false;
+ bool is_crt = false, is_lvds = false, is_tv = false;
+ bool is_mipi = false;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct psb_intel_output *psb_intel_output = NULL;
+ uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN;
+ struct drm_encoder *encoder;
+
+ PSB_DEBUG_ENTRY("pipe = 0x%x\n", pipe);
+
+ if (!ospm_power_using_hw_begin(OSPM_DISPLAY_ISLAND,
+ OSPM_UHB_FORCE_POWER_ON))
+ return 0;
+
+ memcpy(&psb_intel_crtc->saved_mode,
+ mode,
+ sizeof(struct drm_display_mode));
+ memcpy(&psb_intel_crtc->saved_adjusted_mode,
+ adjusted_mode,
+ sizeof(struct drm_display_mode));
+
+ list_for_each_entry(encoder, &mode_config->encoder_list, head) {
+
+ if (encoder->crtc != crtc)
+ continue;
+
+ psb_intel_output = enc_to_psb_intel_output(encoder);
+ switch (psb_intel_output->type) {
+ case INTEL_OUTPUT_LVDS:
+ is_lvds = true;
+ break;
+ case INTEL_OUTPUT_SDVO:
+ is_sdvo = true;
+ break;
+ case INTEL_OUTPUT_TVOUT:
+ is_tv = true;
+ break;
+ case INTEL_OUTPUT_ANALOG:
+ is_crt = true;
+ break;
+ case INTEL_OUTPUT_MIPI:
+ is_mipi = true;
+ break;
+ }
+ }
+
+ /* Disable the VGA plane that we never use */
+ REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+
+ /* Disable the panel fitter if it was on our pipe */
+ if (mrst_panel_fitter_pipe(dev) == pipe)
+ REG_WRITE(PFIT_CONTROL, 0);
+
+ REG_WRITE(pipesrc_reg,
+ ((mode->crtc_hdisplay - 1) << 16) |
+ (mode->crtc_vdisplay - 1));
+
+ if (psb_intel_output)
+ drm_connector_property_get_value(&psb_intel_output->base,
+ dev->mode_config.scaling_mode_property, &scalingType);
+
+ if (scalingType == DRM_MODE_SCALE_NO_SCALE) {
+ /* Moorestown doesn't have register support for centering so
+ * we need to mess with the h/vblank and h/vsync start and
+ * ends to get centering */
+ int offsetX = 0, offsetY = 0;
+
+ offsetX = (adjusted_mode->crtc_hdisplay -
+ mode->crtc_hdisplay) / 2;
+ offsetY = (adjusted_mode->crtc_vdisplay -
+ mode->crtc_vdisplay) / 2;
+
+ REG_WRITE(htot_reg, (mode->crtc_hdisplay - 1) |
+ ((adjusted_mode->crtc_htotal - 1) << 16));
+ REG_WRITE(vtot_reg, (mode->crtc_vdisplay - 1) |
+ ((adjusted_mode->crtc_vtotal - 1) << 16));
+ REG_WRITE(hblank_reg,
+ (adjusted_mode->crtc_hblank_start - offsetX - 1) |
+ ((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16));
+ REG_WRITE(hsync_reg,
+ (adjusted_mode->crtc_hsync_start - offsetX - 1) |
+ ((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16));
+ REG_WRITE(vblank_reg,
+ (adjusted_mode->crtc_vblank_start - offsetY - 1) |
+ ((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16));
+ REG_WRITE(vsync_reg,
+ (adjusted_mode->crtc_vsync_start - offsetY - 1) |
+ ((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16));
+ } else {
+ REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
+ ((adjusted_mode->crtc_htotal - 1) << 16));
+ REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) |
+ ((adjusted_mode->crtc_vtotal - 1) << 16));
+ REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
+ ((adjusted_mode->crtc_hblank_end - 1) << 16));
+ REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) |
+ ((adjusted_mode->crtc_hsync_end - 1) << 16));
+ REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) |
+ ((adjusted_mode->crtc_vblank_end - 1) << 16));
+ REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
+ ((adjusted_mode->crtc_vsync_end - 1) << 16));
+ }
+
+ /* Flush the plane changes */
+ {
+ struct drm_crtc_helper_funcs *crtc_funcs =
+ crtc->helper_private;
+ crtc_funcs->mode_set_base(crtc, x, y, old_fb);
+ }
+
+ /* setup pipeconf */
+ pipeconf = REG_READ(pipeconf_reg);
+
+ /* Set up the display plane register */
+ dspcntr = REG_READ(dspcntr_reg);
+ dspcntr |= DISPPLANE_GAMMA_ENABLE;
+
+ if (pipe == 0)
+ dspcntr |= DISPPLANE_SEL_PIPE_A;
+ else
+ dspcntr |= DISPPLANE_SEL_PIPE_B;
+
+ dev_priv->dspcntr = dspcntr |= DISPLAY_PLANE_ENABLE;
+ dev_priv->pipeconf = pipeconf |= PIPEACONF_ENABLE;
+
+ if (is_mipi)
+ goto mrst_crtc_mode_set_exit;
+
+ refclk = dev_priv->core_freq * 1000;
+
+ dpll = 0; /*BIT16 = 0 for 100MHz reference */
+
+ ok = mrstFindBestPLL(crtc, adjusted_mode->clock, refclk, &clock);
+
+ if (!ok) {
+ PSB_DEBUG_ENTRY(
+ "mrstFindBestPLL fail in mrst_crtc_mode_set.\n");
+ } else {
+ PSB_DEBUG_ENTRY("mrst_crtc_mode_set pixel clock = %d,"
+ "m = %x, p1 = %x.\n", clock.dot, clock.m,
+ clock.p1);
+ }
+
+ fp = mrst_m_converts[(clock.m - MRST_M_MIN)] << 8;
+
+ dpll |= DPLL_VGA_MODE_DIS;
+
+
+ dpll |= DPLL_VCO_ENABLE;
+
+ if (is_lvds)
+ dpll |= DPLLA_MODE_LVDS;
+ else
+ dpll |= DPLLB_MODE_DAC_SERIAL;
+
+ if (is_sdvo) {
+ int sdvo_pixel_multiply =
+ adjusted_mode->clock / mode->clock;
+
+ dpll |= DPLL_DVO_HIGH_SPEED;
+ dpll |=
+ (sdvo_pixel_multiply -
+ 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
+ }
+
+
+ /* compute bitmask from p1 value */
+ dpll |= (1 << (clock.p1 - 2)) << 17;
+
+ dpll |= DPLL_VCO_ENABLE;
+
+ mrstPrintPll("chosen", &clock);
+
+ if (dpll & DPLL_VCO_ENABLE) {
+ REG_WRITE(fp_reg, fp);
+ REG_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
+ REG_READ(dpll_reg);
+ /* Check the DPLLA lock bit PIPEACONF[29] */
+ udelay(150);
+ }
+
+ REG_WRITE(fp_reg, fp);
+ REG_WRITE(dpll_reg, dpll);
+ REG_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+
+ /* write it again -- the BIOS does, after all */
+ REG_WRITE(dpll_reg, dpll);
+ REG_READ(dpll_reg);
+ /* Wait for the clocks to stabilize. */
+ udelay(150);
+
+ REG_WRITE(pipeconf_reg, pipeconf);
+ REG_READ(pipeconf_reg);
+ psb_intel_wait_for_vblank(dev);
+
+ REG_WRITE(dspcntr_reg, dspcntr);
+ psb_intel_wait_for_vblank(dev);
+
+mrst_crtc_mode_set_exit:
+ ospm_power_using_hw_end(OSPM_DISPLAY_ISLAND);
+ return 0;
+}
+
+static bool mrst_crtc_mode_fixup(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+int mrst_pipe_set_base(struct drm_crtc *crtc,
+ int x, int y, struct drm_framebuffer *old_fb)
+{
+ struct drm_device *dev = crtc->dev;
+ /* struct drm_i915_master_private *master_priv; */
+ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+ struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb);
+ struct psb_intel_mode_device *mode_dev = psb_intel_crtc->mode_dev;
+ int pipe = psb_intel_crtc->pipe;
+ unsigned long Start, Offset;
+ /* FIXME: check if we need this surely MRST is pipe 0 only */
+ int dspbase = (pipe == 0 ? DSPALINOFF : DSPBBASE);
+ int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF);
+ int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
+ int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+ u32 dspcntr;
+ int ret = 0;
+
+ PSB_DEBUG_ENTRY("\n");
+
+ /* no fb bound */
+ if (!crtc->fb) {
+ DRM_DEBUG("No FB bound\n");
+ return 0;
+ }
+
+ if (!ospm_power_using_hw_begin(OSPM_DISPLAY_ISLAND,
+ OSPM_UHB_FORCE_POWER_ON))
+ return 0;
+
+ Start = mode_dev->bo_offset(dev, psbfb);
+ Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
+
+ REG_WRITE(dspstride, crtc->fb->pitch);
+
+ dspcntr = REG_READ(dspcntr_reg);
+ dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+
+ switch (crtc->fb->bits_per_pixel) {
+ case 8:
+ dspcntr |= DISPPLANE_8BPP;
+ break;
+ case 16:
+ if (crtc->fb->depth == 15)
+ dspcntr |= DISPPLANE_15_16BPP;
+ else
+ dspcntr |= DISPPLANE_16BPP;
+ break;
+ case 24:
+ case 32:
+ dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+ break;
+ default:
+ DRM_ERROR("Unknown color depth\n");
+ ret = -EINVAL;
+ goto pipe_set_base_exit;
+ }
+ REG_WRITE(dspcntr_reg, dspcntr);
+
+ DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y);
+ if (0 /* FIXMEAC - check what PSB needs */) {
+ REG_WRITE(dspbase, Offset);
+ REG_READ(dspbase);
+ REG_WRITE(dspsurf, Start);
+ REG_READ(dspsurf);
+ } else {
+ REG_WRITE(dspbase, Start + Offset);
+ REG_READ(dspbase);
+ }
+
+pipe_set_base_exit:
+ ospm_power_using_hw_end(OSPM_DISPLAY_ISLAND);
+ return ret;
+}
+
+static void mrst_crtc_prepare(struct drm_crtc *crtc)
+{
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+ crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+}
+
+static void mrst_crtc_commit(struct drm_crtc *crtc)
+{
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+ crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
+}
+
+const struct drm_crtc_helper_funcs mrst_helper_funcs = {
+ .dpms = mrst_crtc_dpms,
+ .mode_fixup = mrst_crtc_mode_fixup,
+ .mode_set = mrst_crtc_mode_set,
+ .mode_set_base = mrst_pipe_set_base,
+ .prepare = mrst_crtc_prepare,
+ .commit = mrst_crtc_commit,
+};
+
diff --git a/drivers/staging/gma500/mrst_lvds.c b/drivers/staging/gma500/mrst_lvds.c
new file mode 100644
index 0000000..4628b01
--- /dev/null
+++ b/drivers/staging/gma500/mrst_lvds.c
@@ -0,0 +1,364 @@
+/*
+ * Copyright © 2006-2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ * Eric Anholt <eric@...olt.net>
+ * Dave Airlie <airlied@...ux.ie>
+ * Jesse Barnes <jesse.barnes@...el.com>
+ */
+
+#include <linux/i2c.h>
+#include <drm/drmP.h>
+
+#include "psb_intel_bios.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "psb_powermgmt.h"
+#include <linux/pm_runtime.h>
+
+/* The max/min PWM frequency in BPCR[31:17] - */
+/* The smallest number is 1 (not 0) that can fit in the
+ * 15-bit field of the and then*/
+/* shifts to the left by one bit to get the actual 16-bit
+ * value that the 15-bits correspond to.*/
+#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF
+#define BRIGHTNESS_MAX_LEVEL 100
+
+/**
+ * Sets the power state for the panel.
+ */
+static void mrst_lvds_set_power(struct drm_device *dev,
+ struct psb_intel_output *output, bool on)
+{
+ u32 pp_status;
+ DRM_DRIVER_PRIVATE_T *dev_priv = dev->dev_private;
+ PSB_DEBUG_ENTRY("\n");
+
+ if (!ospm_power_using_hw_begin(OSPM_DISPLAY_ISLAND,
+ OSPM_UHB_FORCE_POWER_ON))
+ return;
+
+ if (on) {
+ REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
+ POWER_TARGET_ON);
+ do {
+ pp_status = REG_READ(PP_STATUS);
+ } while ((pp_status & (PP_ON | PP_READY)) == PP_READY);
+ dev_priv->is_lvds_on = true;
+ } else {
+ REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
+ ~POWER_TARGET_ON);
+ do {
+ pp_status = REG_READ(PP_STATUS);
+ } while (pp_status & PP_ON);
+ dev_priv->is_lvds_on = false;
+ pm_request_idle(&dev->pdev->dev);
+ }
+
+ ospm_power_using_hw_end(OSPM_DISPLAY_ISLAND);
+}
+
+static void mrst_lvds_dpms(struct drm_encoder *encoder, int mode)
+{
+ struct drm_device *dev = encoder->dev;
+ struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+
+ PSB_DEBUG_ENTRY("\n");
+
+ if (mode == DRM_MODE_DPMS_ON)
+ mrst_lvds_set_power(dev, output, true);
+ else
+ mrst_lvds_set_power(dev, output, false);
+
+ /* XXX: We never power down the LVDS pairs. */
+}
+
+static void mrst_lvds_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct psb_intel_mode_device *mode_dev =
+ enc_to_psb_intel_output(encoder)->mode_dev;
+ struct drm_device *dev = encoder->dev;
+ u32 lvds_port;
+ uint64_t v = DRM_MODE_SCALE_FULLSCREEN;
+
+ PSB_DEBUG_ENTRY("\n");
+
+ if (!ospm_power_using_hw_begin(OSPM_DISPLAY_ISLAND,
+ OSPM_UHB_FORCE_POWER_ON))
+ return;
+
+ /*
+ * The LVDS pin pair will already have been turned on in the
+ * psb_intel_crtc_mode_set since it has a large impact on the DPLL
+ * settings.
+ */
+ lvds_port = (REG_READ(LVDS) &
+ (~LVDS_PIPEB_SELECT)) |
+ LVDS_PORT_EN |
+ LVDS_BORDER_EN;
+
+ if (mode_dev->panel_wants_dither)
+ lvds_port |= MRST_PANEL_8TO6_DITHER_ENABLE;
+
+ REG_WRITE(LVDS, lvds_port);
+
+ drm_connector_property_get_value(
+ &enc_to_psb_intel_output(encoder)->base,
+ dev->mode_config.scaling_mode_property,
+ &v);
+
+ if (v == DRM_MODE_SCALE_NO_SCALE)
+ REG_WRITE(PFIT_CONTROL, 0);
+ else if (v == DRM_MODE_SCALE_ASPECT) {
+ if ((mode->vdisplay != adjusted_mode->crtc_vdisplay) ||
+ (mode->hdisplay != adjusted_mode->crtc_hdisplay)) {
+ if ((adjusted_mode->crtc_hdisplay * mode->vdisplay) ==
+ (mode->hdisplay * adjusted_mode->crtc_vdisplay))
+ REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
+ else if ((adjusted_mode->crtc_hdisplay *
+ mode->vdisplay) > (mode->hdisplay *
+ adjusted_mode->crtc_vdisplay))
+ REG_WRITE(PFIT_CONTROL, PFIT_ENABLE |
+ PFIT_SCALING_MODE_PILLARBOX);
+ else
+ REG_WRITE(PFIT_CONTROL, PFIT_ENABLE |
+ PFIT_SCALING_MODE_LETTERBOX);
+ } else
+ REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
+ } else /*(v == DRM_MODE_SCALE_FULLSCREEN)*/
+ REG_WRITE(PFIT_CONTROL, PFIT_ENABLE);
+
+ ospm_power_using_hw_end(OSPM_DISPLAY_ISLAND);
+}
+
+
+static const struct drm_encoder_helper_funcs mrst_lvds_helper_funcs = {
+ .dpms = mrst_lvds_dpms,
+ .mode_fixup = psb_intel_lvds_mode_fixup,
+ .prepare = psb_intel_lvds_prepare,
+ .mode_set = mrst_lvds_mode_set,
+ .commit = psb_intel_lvds_commit,
+};
+
+static struct drm_display_mode lvds_configuration_modes[] = {
+ /* hard coded fixed mode for TPO LTPS LPJ040K001A */
+ { DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER, 33264, 800, 836,
+ 846, 1056, 0, 480, 489, 491, 525, 0, 0) },
+ /* hard coded fixed mode for LVDS 800x480 */
+ { DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER, 30994, 800, 801,
+ 802, 1024, 0, 480, 481, 482, 525, 0, 0) },
+ /* hard coded fixed mode for Samsung 480wsvga LVDS 1024x600@75 */
+ { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 53990, 1024, 1072,
+ 1104, 1184, 0, 600, 603, 604, 608, 0, 0) },
+ /* hard coded fixed mode for Samsung 480wsvga LVDS 1024x600@75 */
+ { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 53990, 1024, 1104,
+ 1136, 1184, 0, 600, 603, 604, 608, 0, 0) },
+ /* hard coded fixed mode for Sharp wsvga LVDS 1024x600 */
+ { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 48885, 1024, 1124,
+ 1204, 1312, 0, 600, 607, 610, 621, 0, 0) },
+ /* hard coded fixed mode for LVDS 1024x768 */
+ { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048,
+ 1184, 1344, 0, 768, 771, 777, 806, 0, 0) },
+ /* hard coded fixed mode for LVDS 1366x768 */
+ { DRM_MODE("1366x768", DRM_MODE_TYPE_DRIVER, 77500, 1366, 1430,
+ 1558, 1664, 0, 768, 769, 770, 776, 0, 0) },
+};
+
+/* Returns the panel fixed mode from configuration. */
+
+static struct drm_display_mode *
+mrst_lvds_get_configuration_mode(struct drm_device *dev)
+{
+ struct drm_display_mode *mode = NULL;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct mrst_timing_info *ti = &dev_priv->gct_data.DTD;
+
+ if (dev_priv->vbt_data.size != 0x00) { /*if non-zero, then use vbt*/
+ mode = kzalloc(sizeof(*mode), GFP_KERNEL);
+ if (!mode)
+ return NULL;
+
+ mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo;
+ mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo;
+ mode->hsync_start = mode->hdisplay + \
+ ((ti->hsync_offset_hi << 8) | \
+ ti->hsync_offset_lo);
+ mode->hsync_end = mode->hsync_start + \
+ ((ti->hsync_pulse_width_hi << 8) | \
+ ti->hsync_pulse_width_lo);
+ mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \
+ ti->hblank_lo);
+ mode->vsync_start = \
+ mode->vdisplay + ((ti->vsync_offset_hi << 4) | \
+ ti->vsync_offset_lo);
+ mode->vsync_end = \
+ mode->vsync_start + ((ti->vsync_pulse_width_hi << 4) | \
+ ti->vsync_pulse_width_lo);
+ mode->vtotal = mode->vdisplay + \
+ ((ti->vblank_hi << 8) | ti->vblank_lo);
+ mode->clock = ti->pixel_clock * 10;
+#if 0
+ printk(KERN_INFO "hdisplay is %d\n", mode->hdisplay);
+ printk(KERN_INFO "vdisplay is %d\n", mode->vdisplay);
+ printk(KERN_INFO "HSS is %d\n", mode->hsync_start);
+ printk(KERN_INFO "HSE is %d\n", mode->hsync_end);
+ printk(KERN_INFO "htotal is %d\n", mode->htotal);
+ printk(KERN_INFO "VSS is %d\n", mode->vsync_start);
+ printk(KERN_INFO "VSE is %d\n", mode->vsync_end);
+ printk(KERN_INFO "vtotal is %d\n", mode->vtotal);
+ printk(KERN_INFO "clock is %d\n", mode->clock);
+#endif
+ } else
+ mode = drm_mode_duplicate(dev, &lvds_configuration_modes[2]);
+
+ drm_mode_set_name(mode);
+ drm_mode_set_crtcinfo(mode, 0);
+
+ return mode;
+}
+
+/**
+ * mrst_lvds_init - setup LVDS connectors on this device
+ * @dev: drm device
+ *
+ * Create the connector, register the LVDS DDC bus, and try to figure out what
+ * modes we can display on the LVDS panel (if present).
+ */
+void mrst_lvds_init(struct drm_device *dev,
+ struct psb_intel_mode_device *mode_dev)
+{
+ struct psb_intel_output *psb_intel_output;
+ struct drm_connector *connector;
+ struct drm_encoder *encoder;
+ struct drm_psb_private *dev_priv =
+ (struct drm_psb_private *) dev->dev_private;
+ struct edid *edid;
+ int ret = 0;
+ struct i2c_adapter *i2c_adap;
+ struct drm_display_mode *scan; /* *modes, *bios_mode; */
+
+ PSB_DEBUG_ENTRY("\n");
+
+ psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL);
+ if (!psb_intel_output)
+ return;
+
+ psb_intel_output->mode_dev = mode_dev;
+ connector = &psb_intel_output->base;
+ encoder = &psb_intel_output->enc;
+ dev_priv->is_lvds_on = true;
+ drm_connector_init(dev, &psb_intel_output->base,
+ &psb_intel_lvds_connector_funcs,
+ DRM_MODE_CONNECTOR_LVDS);
+
+ drm_encoder_init(dev, &psb_intel_output->enc, &psb_intel_lvds_enc_funcs,
+ DRM_MODE_ENCODER_LVDS);
+
+ drm_mode_connector_attach_encoder(&psb_intel_output->base,
+ &psb_intel_output->enc);
+ psb_intel_output->type = INTEL_OUTPUT_LVDS;
+
+ drm_encoder_helper_add(encoder, &mrst_lvds_helper_funcs);
+ drm_connector_helper_add(connector,
+ &psb_intel_lvds_connector_helper_funcs);
+ connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+ connector->interlace_allowed = false;
+ connector->doublescan_allowed = false;
+
+ drm_connector_attach_property(connector,
+ dev->mode_config.scaling_mode_property,
+ DRM_MODE_SCALE_FULLSCREEN);
+ drm_connector_attach_property(connector,
+ dev_priv->backlight_property,
+ BRIGHTNESS_MAX_LEVEL);
+
+ mode_dev->panel_wants_dither = false;
+ if (dev_priv->vbt_data.size != 0x00)
+ mode_dev->panel_wants_dither = (dev_priv->gct_data.
+ Panel_Port_Control & MRST_PANEL_8TO6_DITHER_ENABLE);
+
+ /*
+ * LVDS discovery:
+ * 1) check for EDID on DDC
+ * 2) check for VBT data
+ * 3) check to see if LVDS is already on
+ * if none of the above, no panel
+ * 4) make sure lid is open
+ * if closed, act like it's not there for now
+ */
+ i2c_adap = i2c_get_adapter(2);
+ if (i2c_adap == NULL)
+ printk(KERN_ALERT "No ddc adapter available!\n");
+ /*
+ * Attempt to get the fixed panel mode from DDC. Assume that the
+ * preferred mode is the right one.
+ */
+ if (i2c_adap) {
+ edid = drm_get_edid(connector, i2c_adap);
+ if (edid) {
+ drm_mode_connector_update_edid_property(connector,
+ edid);
+ ret = drm_add_edid_modes(connector, edid);
+ kfree(edid);
+ }
+
+ list_for_each_entry(scan, &connector->probed_modes, head) {
+ if (scan->type & DRM_MODE_TYPE_PREFERRED) {
+ mode_dev->panel_fixed_mode =
+ drm_mode_duplicate(dev, scan);
+ goto out; /* FIXME: check for quirks */
+ }
+ }
+ }
+
+ /*
+ * If we didn't get EDID, try geting panel timing
+ * from configuration data
+ */
+ mode_dev->panel_fixed_mode = mrst_lvds_get_configuration_mode(dev);
+
+ if (mode_dev->panel_fixed_mode) {
+ mode_dev->panel_fixed_mode->type |=
+ DRM_MODE_TYPE_PREFERRED;
+ goto out; /* FIXME: check for quirks */
+ }
+
+ /* If we still don't have a mode after all that, give up. */
+ if (!mode_dev->panel_fixed_mode) {
+ DRM_DEBUG
+ ("Found no modes on the lvds, ignoring the LVDS\n");
+ goto failed_find;
+ }
+
+out:
+ drm_sysfs_connector_add(connector);
+ return;
+
+failed_find:
+ DRM_DEBUG("No LVDS modes found, disabling.\n");
+ if (psb_intel_output->ddc_bus)
+ psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
+
+/* failed_ddc: */
+
+ drm_encoder_cleanup(encoder);
+ drm_connector_cleanup(connector);
+ kfree(connector);
+}
+
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists