| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1301493927-30237-3-git-send-email-cheiny@synaptics.com>
Date: Wed, 30 Mar 2011 07:05:26 -0700
From: Christopher Heiny <cheiny@...aptics.com>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc: Jean Delvare <khali@...ux-fr.org>,
Linux Kernel <linux-kernel@...r.kernel.org>,
Linux Input <linux-input@...r.kernel.org>,
Christopher Heiny <cheiny@...aptics.com>,
Allie Xiong <axiong@...aptics.com>,
William Manson <wmanson@...aptics.com>,
Joerie de Gram <j.de.gram@...il.com>,
Linus Walleij <linus.walleij@...ricsson.com>,
Naveen Kumar Gaddipati <naveen.gaddipati@...ricsson.com>
Subject: [PATCH 2/3] (corrected) input/touchscreen: Synaptics RMI4 Touchscreen Driver
Driver for Synaptics touchscreens using RMI4 protocol.
Signed-off-by: William Manson <wmanson@...aptics.com>
Signed-off-by: Allie Xiong <axiong@...aptics.com>
Signed-off-by: Christopher Heiny <cheiny@...aptics.com>
Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc: Linus Walleij <linus.walleij@...ricsson.com>
Cc: Naveen Kumar Gaddipati <naveen.gaddipati@...ricsson.com>
Cc: Joeri de Gram <j.de.gram@...il.com>
Acked-by: Jean Delvare <khali@...ux-fr.org>
---
diff --git a/drivers/input/touchscreen/rmi_f01.c b/drivers/input/touchscreen/rmi_f01.c
new file mode 100644
index 0000000..ddf6cd3
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_f01.c
@@ -0,0 +1,245 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $01 support for sensor
+ * control and configuration.
+ *
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/param.h>
+
+#include "rmi.h"
+#include "rmi_drvr.h"
+#include "rmi_bus.h"
+#include "rmi_sensor.h"
+#include "rmi_function.h"
+#include "rmi_f01.h"
+
+
+#define RMI_REPORT_RATE_80 0
+#define RMI_REPORT_RATE_40 (1 << 6)
+
+/** Context data for each F01 we find.
+ */
+struct f01_instance_data {
+ struct rmi_F01_control *controlRegisters;
+ struct rmi_F01_data *dataRegisters;
+ struct rmi_F01_query *queryRegisters;
+};
+
+/*.
+ * The interrupt handler for Fn $01 doesn't do anything (for now).
+ */
+void FN_01_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int assertedIRQs)
+{
+ struct f01_instance_data *instanceData = (struct f01_instance_data *) rmifninfo->fndata;
+
+ printk(KERN_DEBUG "%s: Read device status.", __func__);
+
+ if (rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.dataBaseAddr,
+ &instanceData->dataRegisters->deviceStatus, 1)) {
+ printk(KERN_ERR "%s : Could not read F01 device status.\n",
+ __func__);
+ }
+
+ /* TODO: Check for reset and handle appropriately.
+ */
+}
+EXPORT_SYMBOL(FN_01_inthandler);
+
+/*
+ * This reads in the function $01 source data.
+ *
+ */
+void FN_01_attention(struct rmi_function_info *rmifninfo)
+{
+ struct f01_instance_data *instanceData = (struct f01_instance_data *) rmifninfo->fndata;
+
+ /* TODO: Compute size to read and number of IRQ registers to processors
+ * dynamically. See comments in rmi.h. */
+ if (rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.dataBaseAddr+1,
+ instanceData->dataRegisters->irqs, 1)) {
+ printk(KERN_ERR "%s : Could not read interrupt status registers at 0x%02x\n",
+ __func__, rmifninfo->funcDescriptor.dataBaseAddr);
+ }
+
+ if (instanceData->dataRegisters->irqs[0] & instanceData->controlRegisters->interruptEnable[0]) {
+ /* call down to the sensors irq dispatcher to dispatch all enabled IRQs */
+ rmifninfo->sensor->dispatchIRQs(rmifninfo->sensor,
+ instanceData->dataRegisters->irqs[0]);
+ }
+
+}
+EXPORT_SYMBOL(FN_01_attention);
+
+int FN_01_config(struct rmi_function_info *rmifninfo)
+{
+ /* print info and do any source specific configuration. */
+ int retval = 0;
+
+ printk(KERN_DEBUG "%s: RMI4 function $01 config\n", __func__);
+
+ /* On slow processors, we need to throttle back the rate at which
+ * data updates become ready. */
+#if 0
+ /* TODO: This code gets invoked pointlessly on some systems, and causes
+ * the Synaptics device to stop working in those cases. We need to figure
+ * out what's going on there.
+ */
+ if (HZ < 500) {
+ /* The default packet rate of 80 packets per
+ * second is too fast (the Linux time slice for
+ * sub-GHz processors is only 100 times per second).
+ * So re-program it to 40 packets per second.
+ */
+ /* TODO: We need to OR this in, rather than stomping on the other
+ * contents of the register. It's OK for now, because this is
+ * early in the initializaton process and nobody else has had
+ * a chance to change this register, which defaults to 0.
+ */
+ rmi_write(rmifninfo->sensor, rmifninfo->funcDescriptor.controlBaseAddr, RMI_REPORT_RATE_40);
+ printk(KERN_INFO "%s: Throttled back reporting for slow CPU (%d HZ).", __func__, HZ);
+ }
+#endif
+
+ return retval;
+}
+EXPORT_SYMBOL(FN_01_config);
+
+/* Initialize any function $01 specific params and settings - input
+ * settings, device settings, etc.
+ */
+int FN_01_init(struct rmi_function_device *function_device)
+{
+ pr_debug("%s: RMI4 function $01 init\n", __func__);
+
+ return 0;
+}
+EXPORT_SYMBOL(FN_01_init);
+
+int FN_01_detect(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr, unsigned int interruptCount)
+{
+ int i;
+ int InterruptOffset;
+ int retval = 0;
+ struct f01_instance_data *instanceData;
+ struct rmi_F01_control *controlRegisters;
+ struct rmi_F01_data *dataRegisters;
+ struct rmi_F01_query *queryRegisters;
+
+ pr_debug("%s: RMI4 function $01 detect\n", __func__);
+
+ /* Store addresses - used elsewhere to read data,
+ * control, query, etc. */
+ rmifninfo->funcDescriptor.queryBaseAddr = fndescr->queryBaseAddr;
+ rmifninfo->funcDescriptor.commandBaseAddr = fndescr->commandBaseAddr;
+ rmifninfo->funcDescriptor.controlBaseAddr = fndescr->controlBaseAddr;
+ rmifninfo->funcDescriptor.dataBaseAddr = fndescr->dataBaseAddr;
+ rmifninfo->funcDescriptor.interruptSrcCnt = fndescr->interruptSrcCnt;
+ rmifninfo->funcDescriptor.functionNum = fndescr->functionNum;
+
+ rmifninfo->numSources = fndescr->interruptSrcCnt;
+
+ /* Set up context data. */
+ instanceData = kzalloc(sizeof(*instanceData), GFP_KERNEL);
+ if (!instanceData) {
+ printk(KERN_ERR "%s: Error allocating memory for F01 context data.\n", __func__);
+ return -ENOMEM;
+ }
+ queryRegisters = kzalloc(sizeof(*queryRegisters), GFP_KERNEL);
+ if (!queryRegisters) {
+ printk(KERN_ERR "%s: Error allocating memory for F01 query registers.\n", __func__);
+ return -ENOMEM;
+ }
+ instanceData->queryRegisters = queryRegisters;
+ retval = rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.queryBaseAddr,
+ (char *)instanceData->queryRegisters, sizeof(struct rmi_F01_query));
+ if (retval) {
+ printk(KERN_ERR "%s : Could not read F01 control registers at 0x%02x. Error %d.\n",
+ __func__, rmifninfo->funcDescriptor.dataBaseAddr, retval);
+ }
+ printk(KERN_DEBUG "%s: RMI Protocol: %d.%d",
+ __func__, queryRegisters->rmi_maj_ver, queryRegisters->rmi_min_ver);
+ printk(KERN_DEBUG "%s: Manufacturer: %d %s", __func__,
+ queryRegisters->mfgid, queryRegisters->mfgid == 1 ? "(Synaptics)" : "");
+ printk(KERN_DEBUG "%s: Properties: 0x%x",
+ __func__, queryRegisters->properties);
+ printk(KERN_DEBUG "%s: Product Info: 0x%x 0x%x",
+ __func__, queryRegisters->prod_info[0], queryRegisters->prod_info[1]);
+ printk(KERN_DEBUG "%s: Date Code: Year : %d Month: %d Day: %d",
+ __func__, queryRegisters->date_code[0], queryRegisters->date_code[1],
+ queryRegisters->date_code[2]);
+ printk(KERN_DEBUG "%s: Tester ID: %d", __func__, queryRegisters->tester_id);
+ printk(KERN_DEBUG "%s: Serial Number: 0x%x",
+ __func__, queryRegisters->serial_num);
+ printk(KERN_DEBUG "%s: Product ID: %s", __func__, queryRegisters->prod_id);
+
+ /* TODO: size of control registers needs to be computed dynamically. See comment
+ * in rmi.h. */
+ controlRegisters = kzalloc(sizeof(*controlRegisters), GFP_KERNEL);
+ if (!controlRegisters) {
+ printk(KERN_ERR "%s: Error allocating memory for F01 control registers.\n", __func__);
+ return -ENOMEM;
+ }
+ instanceData->controlRegisters = controlRegisters;
+ retval = rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.controlBaseAddr,
+ (char *)instanceData->controlRegisters, sizeof(struct rmi_F01_control));
+ if (retval) {
+ printk(KERN_ERR "%s : Could not read F01 control registers at 0x%02x. Error %d.\n",
+ __func__, rmifninfo->funcDescriptor.dataBaseAddr, retval);
+ }
+
+ /* TODO: size of data registers needs to be computed dynamically. See comment
+ * in rmi.h. */
+ dataRegisters = kzalloc(sizeof(*dataRegisters), GFP_KERNEL);
+ if (!dataRegisters) {
+ printk(KERN_ERR "%s: Error allocating memory for F01 data registers.\n", __func__);
+ return -ENOMEM;
+ }
+ instanceData->dataRegisters = dataRegisters;
+ rmifninfo->fndata = instanceData;
+
+ /* Need to get interrupt info to be used later when handling
+ interrupts. */
+ rmifninfo->interruptRegister = interruptCount/8;
+
+ /* loop through interrupts for each source and or in a bit
+ to the interrupt mask for each. */
+ InterruptOffset = interruptCount % 8;
+
+ for (i = InterruptOffset;
+ i < ((fndescr->interruptSrcCnt & 0x7) + InterruptOffset);
+ i++) {
+ rmifninfo->interruptMask |= 1 << i;
+ }
+
+ return retval;
+}
+EXPORT_SYMBOL(FN_01_detect);
diff --git a/drivers/input/touchscreen/rmi_f01.h b/drivers/input/touchscreen/rmi_f01.h
new file mode 100644
index 0000000..976e062
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_f01.h
@@ -0,0 +1,40 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $01 header.
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ * There is only one function $01 for each RMI4 sensor. This will be
+ * the function that is used to set sensor control and configurations
+ * and check the interrupts to find the source function that is interrupting.
+ *
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+#ifndef _RMI_FUNCTION_01_H
+#define _RMI_FUNCTION_01_H
+
+void FN_01_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int assertedIRQs);
+int FN_01_config(struct rmi_function_info *rmifninfo);
+int FN_01_init(struct rmi_function_device *function_device);
+int FN_01_detect(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr,
+ unsigned int interruptCount);
+void FN_01_attention(struct rmi_function_info *rmifninfo);
+#endif
diff --git a/drivers/input/touchscreen/rmi_f11.c b/drivers/input/touchscreen/rmi_f11.c
new file mode 100644
index 0000000..7902f36
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_f11.c
@@ -0,0 +1,909 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $11 support for 2D.
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+#include "rmi.h"
+#include "rmi_drvr.h"
+#include "rmi_bus.h"
+#include "rmi_sensor.h"
+#include "rmi_function.h"
+#include "rmi_f11.h"
+#include "rmi_platformdata.h"
+
+
+static int sensorMaxX;
+static int sensorMaxY;
+
+struct f11_instance_data {
+ struct rmi_F11_device_query *deviceInfo;
+ struct rmi_F11_sensor_query *sensorInfo;
+ struct rmi_F11_control *controlRegisters;
+ unsigned char fingerDataBufferSize;
+ unsigned char absDataOffset;
+ unsigned char absDataSize;
+ unsigned char relDataOffset;
+ unsigned char gestureDataOffset;
+ unsigned char *fingerDataBuffer;
+ /* Last X & Y seen, needed at finger lift. Was down indicates at least one finger was here. */
+ /* TODO: Eventually we'll need to track this info on a per finger basis. */
+ bool wasdown;
+ unsigned int oldX;
+ unsigned int oldY;
+ /* Transformations to be applied to coordinates before reporting. */
+ bool flipX;
+ bool flipY;
+ int offsetX;
+ int offsetY;
+ int clipXLow;
+ int clipXHigh;
+ int clipYLow;
+ int clipYHigh;
+ bool swap_axes;
+ bool relReport;
+};
+
+enum f11_finger_state {
+ F11_NO_FINGER = 0,
+ F11_PRESENT = 1,
+ F11_INACCURATE = 2,
+ F11_RESERVED = 3
+};
+
+static ssize_t rmi_fn_11_flip_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_11_flip_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(flip, 0664, rmi_fn_11_flip_show, rmi_fn_11_flip_store); /* RW attr */
+
+static ssize_t rmi_fn_11_clip_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_11_clip_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(clip, 0664, rmi_fn_11_clip_show, rmi_fn_11_clip_store); /* RW attr */
+
+static ssize_t rmi_fn_11_offset_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_11_offset_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(offset, 0664, rmi_fn_11_offset_show, rmi_fn_11_offset_store); /* RW attr */
+
+static ssize_t rmi_fn_11_swap_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_11_swap_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(swap, 0664, rmi_fn_11_swap_show, rmi_fn_11_swap_store); /* RW attr */
+
+static void FN_11_relreport(struct rmi_function_info *rmifninfo);
+
+/*
+ * There is no attention function for Fn $11 - it is left NULL
+ * in the function table so it is not called.
+ *
+ */
+
+
+/*
+ * This reads in a sample and reports the function $11 source data to the
+ * input subsystem. It is used for both polling and interrupt driven
+ * operation. This is called a lot so don't put in any informational
+ * printks since they will slow things way down!
+ */
+void FN_11_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int assertedIRQs)
+{
+ /* number of touch points - fingers down in this case */
+ int fingerDownCount;
+ int finger;
+ struct rmi_function_device *function_device;
+ struct f11_instance_data *instanceData;
+
+ instanceData = (struct f11_instance_data *) rmifninfo->fndata;
+
+ fingerDownCount = 0;
+ function_device = rmifninfo->function_device;
+
+ /* get 2D sensor finger data */
+
+ if (rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.dataBaseAddr,
+ instanceData->fingerDataBuffer, instanceData->fingerDataBufferSize)) {
+ printk(KERN_ERR "%s: Failed to read finger data registers.\n", __func__);
+ return;
+ }
+
+ /* First we need to count the fingers and generate some events related to that. */
+ for (finger = 0; finger < instanceData->sensorInfo->numberOfFingers; finger++) {
+ int reg;
+ int fingerShift;
+ int fingerStatus;
+
+ /* determine which data byte the finger status is in */
+ reg = finger/4;
+ /* bit shift to get finger's status */
+ fingerShift = (finger % 4) * 2;
+ fingerStatus = (instanceData->fingerDataBuffer[reg] >> fingerShift) & 3;
+
+ if (fingerStatus == F11_PRESENT || fingerStatus == F11_INACCURATE) {
+ fingerDownCount++;
+ instanceData->wasdown = true;
+ }
+ }
+ input_report_key(function_device->input,
+ BTN_TOUCH, fingerDownCount);
+ for (finger = 0; finger < (instanceData->sensorInfo->numberOfFingers - 1); finger++) {
+ input_report_key(function_device->input,
+ BTN_2 + finger, fingerDownCount >= (finger + 2));
+ }
+
+ for (finger = 0; finger < instanceData->sensorInfo->numberOfFingers; finger++) {
+ int reg;
+ int fingerShift;
+ int fingerStatus;
+ int X = 0, Y = 0, Z = 0, Wy = 0, Wx = 0;
+
+ /* determine which data byte the finger status is in */
+ reg = finger/4;
+ /* bit shift to get finger's status */
+ fingerShift = (finger % 4) * 2;
+ fingerStatus = (instanceData->fingerDataBuffer[reg] >> fingerShift) & 3;
+
+ /* if finger status indicates a finger is present then
+ read the finger data and report it */
+ if (fingerStatus == F11_PRESENT || fingerStatus == F11_INACCURATE) {
+
+ if (instanceData->sensorInfo->hasAbs) {
+ int maxX = instanceData->controlRegisters->sensorMaxXPos;
+ int maxY = instanceData->controlRegisters->sensorMaxYPos;
+ reg = instanceData->absDataOffset + (finger * instanceData->absDataSize);
+ X = (instanceData->fingerDataBuffer[reg] << 4) & 0x0ff0;
+ X |= (instanceData->fingerDataBuffer[reg+2] & 0x0f);
+ Y = (instanceData->fingerDataBuffer[reg+1] << 4) & 0x0ff0;
+ Y |= ((instanceData->fingerDataBuffer[reg+2] & 0xf0) >> 4) & 0x0f;
+ /* First thing to do is swap axes if needed.
+ */
+ if (instanceData->swap_axes) {
+ int temp = X;
+ X = Y;
+ Y = temp;
+ maxX = instanceData->controlRegisters->sensorMaxYPos;
+ maxY = instanceData->controlRegisters->sensorMaxXPos;
+ }
+ if (instanceData->flipX)
+ X = max(maxX-X, 0);
+ X = X - instanceData->offsetX;
+ X = min(max(X, instanceData->clipXLow), instanceData->clipXHigh);
+ if (instanceData->flipY)
+ Y = max(maxY-Y, 0);
+ Y = Y - instanceData->offsetY;
+ Y = min(max(Y, instanceData->clipYLow), instanceData->clipYHigh);
+
+ /* upper 4 bits of W are Wy,
+ lower 4 of W are Wx */
+ Wy = (instanceData->fingerDataBuffer[reg+3] >> 4) & 0x0f;
+ Wx = instanceData->fingerDataBuffer[reg+3] & 0x0f;
+ if (instanceData->swap_axes) {
+ int temp = Wx;
+ Wx = Wy;
+ Wy = temp;
+ }
+
+ Z = instanceData->fingerDataBuffer[reg+4];
+
+#if 0
+ printk(KERN_DEBUG "%s: Finger %d X %d Y %d Z %d Wx %d Wy %d", __func__, finger, X, Y, Z, Wx, Wy);
+#endif
+
+ /* if this is the first finger report normal
+ ABS_X, ABS_Y, PRESSURE, TOOL_WIDTH events for
+ non-MT apps. Apps that support Multi-touch
+ will ignore these events and use the MT events.
+ Apps that don't support Multi-touch will still
+ function.
+ */
+ if (fingerDownCount == 1) {
+ instanceData->oldX = X;
+ instanceData->oldY = Y;
+ input_report_abs(function_device->input, ABS_X, X);
+ input_report_abs(function_device->input, ABS_Y, Y);
+ input_report_abs(function_device->input, ABS_PRESSURE, Z);
+ input_report_abs(function_device->input, ABS_TOOL_WIDTH,
+ max(Wx, Wy));
+ } else {
+ /* TODO generate non MT events for multifinger situation. */
+ }
+#ifdef CONFIG_SYNA_MULTI_TOUCH
+ /* Report Multi-Touch events for each finger */
+ /* major axis of touch area ellipse */
+ input_report_abs(function_device->input, ABS_MT_TOUCH_MAJOR, Z);
+ /* minor axis of touch area ellipse */
+ input_report_abs(function_device->input, ABS_MT_WIDTH_MAJOR,
+ max(Wx, Wy));
+ /* Currently only 2 supported - 1 or 0 */
+ input_report_abs(function_device->input, ABS_MT_ORIENTATION,
+ (Wx > Wy ? 1 : 0));
+ input_report_abs(function_device->input, ABS_MT_POSITION_X, X);
+ input_report_abs(function_device->input, ABS_MT_POSITION_Y, Y);
+
+ /* TODO: Tracking ID needs to be reported but not used yet. */
+ /* Could be formed by keeping an id per position and assiging */
+ /* a new id when fingerStatus changes for that position.*/
+ input_report_abs(function_device->input, ABS_MT_TRACKING_ID,
+ finger+1);
+
+ /* MT sync between fingers */
+ input_mt_sync(function_device->input);
+#endif
+ }
+ }
+ }
+
+ /* if we had a finger down before and now we don't have any send a button up. */
+ if ((fingerDownCount == 0) && instanceData->wasdown) {
+ instanceData->wasdown = false;
+
+#ifdef CONFIG_SYNA_MULTI_TOUCH
+ input_report_abs(function_device->input, ABS_MT_TOUCH_MAJOR, 0);
+ input_report_abs(function_device->input, ABS_MT_WIDTH_MAJOR, 0);
+ input_report_abs(function_device->input, ABS_MT_POSITION_X, instanceData->oldX);
+ input_report_abs(function_device->input, ABS_MT_POSITION_Y, instanceData->oldY);
+ input_report_abs(function_device->input, ABS_MT_TRACKING_ID, 1);
+ input_mt_sync(function_device->input);
+#endif
+
+ input_report_abs(function_device->input, ABS_X, instanceData->oldX);
+ input_report_abs(function_device->input, ABS_Y, instanceData->oldY);
+ instanceData->oldX = instanceData->oldY = 0;
+ printk(KERN_DEBUG "%s: Finger up.", __func__);
+ }
+
+ FN_11_relreport(rmifninfo);
+ input_sync(function_device->input); /* sync after groups of events */
+
+}
+EXPORT_SYMBOL(FN_11_inthandler);
+
+/* This function reads in relative data for first finger and send to input system */
+static void FN_11_relreport(struct rmi_function_info *rmifninfo)
+{
+ struct f11_instance_data *instanceData;
+ struct rmi_function_device *function_device;
+ instanceData = (struct f11_instance_data *) rmifninfo->fndata;
+ signed char X, Y;
+ unsigned short fn11DataBaseAddr;
+ unsigned short fn11DataRelStartingAddr;
+
+ if (instanceData->sensorInfo->hasRel && instanceData->relReport) {
+ printk(KERN_DEBUG "%s: RMI4 function $11 FN_11_relrepor supports relative mode\n", __func__);
+ function_device = rmifninfo->function_device;
+
+ fn11DataBaseAddr = rmifninfo->funcDescriptor.dataBaseAddr;
+ /* Read and report Rel data for primary finger one register for X and one for Y*/
+ int reg = instanceData->relDataOffset;
+ X = instanceData->fingerDataBuffer[reg];
+ Y = instanceData->fingerDataBuffer[reg+1];
+#if 0
+ printk(KERN_INFO "%s: RMI4 function $11 FN_11_relrepor fn11DataRel offset = 0x%x X = %d Y = %d ", __func__, reg, X, Y);
+#endif
+ if (instanceData->swap_axes) {
+ signed char temp = X;
+ X = Y;
+ Y = temp;
+ }
+ if (instanceData->flipX) {
+ printk(KERN_DEBUG "%s: RMI4 function $11 FN_11_relrepor flipX\n", __func__);
+ X = -X;
+ }
+ if (instanceData->flipY) {
+ printk(KERN_DEBUG "%s: RMI4 function $11 FN_11_relrepor flipY\n", __func__);
+ Y = -Y;
+ }
+ X = min(127, max(-128, X));
+ Y = min(127, max(-128, Y));
+ printk(KERN_DEBUG "%s: RMI4 function $11 FN_11_relrepor after min/max calculation delX: %d delY: %d\n", __func__, X, Y);
+
+ input_report_rel(function_device->input, REL_X, X);
+ input_report_rel(function_device->input, REL_Y, Y);
+ } else {
+ printk(KERN_DEBUG "%s: RMI4 function $11 relative support mode not enabled\n", __func__);
+ }
+}
+
+int FN_11_config(struct rmi_function_info *rmifninfo)
+{
+ /* For the data source - print info and do any
+ source specific configuration. */
+ unsigned char data[14];
+ int retval = 0;
+
+ pr_debug("%s: RMI4 function $11 config\n", __func__);
+
+ /* Get and print some info about the data source... */
+
+ /* To Query 2D devices we need to read from the address obtained
+ * from the function descriptor stored in the RMI function info.
+ */
+ retval = rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.queryBaseAddr,
+ data, 9);
+ if (retval) {
+ printk(KERN_ERR "%s: RMI4 function $11 config:"
+ "Could not read function query registers 0x%x\n",
+ __func__, rmifninfo->funcDescriptor.queryBaseAddr);
+ } else {
+ pr_debug("%s: Number of Fingers: %d\n",
+ __func__, data[1] & 7);
+ pr_debug("%s: Is Configurable: %d\n",
+ __func__, data[1] & (1 << 7) ? 1 : 0);
+ pr_debug("%s: Has Gestures: %d\n",
+ __func__, data[1] & (1 << 5) ? 1 : 0);
+ pr_debug("%s: Has Absolute: %d\n",
+ __func__, data[1] & (1 << 4) ? 1 : 0);
+ pr_debug("%s: Has Relative: %d\n",
+ __func__, data[1] & (1 << 3) ? 1 : 0);
+
+ pr_debug("%s: Number X Electrodes: %d\n",
+ __func__, data[2] & 0x1f);
+ pr_debug("%s: Number Y Electrodes: %d\n",
+ __func__, data[3] & 0x1f);
+ pr_debug("%s: Maximum Electrodes: %d\n",
+ __func__, data[4] & 0x1f);
+
+ pr_debug("%s: Absolute Data Size: %d\n",
+ __func__, data[5] & 3);
+
+ pr_debug("%s: Has XY Dist: %d\n",
+ __func__, data[7] & (1 << 7) ? 1 : 0);
+ pr_debug("%s: Has Pinch: %d\n",
+ __func__, data[7] & (1 << 6) ? 1 : 0);
+ pr_debug("%s: Has Press: %d\n",
+ __func__, data[7] & (1 << 5) ? 1 : 0);
+ pr_debug("%s: Has Flick: %d\n",
+ __func__, data[7] & (1 << 4) ? 1 : 0);
+ pr_debug("%s: Has Early Tap: %d\n",
+ __func__, data[7] & (1 << 3) ? 1 : 0);
+ pr_debug("%s: Has Double Tap: %d\n",
+ __func__, data[7] & (1 << 2) ? 1 : 0);
+ pr_debug("%s: Has Tap and Hold: %d\n",
+ __func__, data[7] & (1 << 1) ? 1 : 0);
+ pr_debug("%s: Has Tap: %d\n",
+ __func__, data[7] & 1 ? 1 : 0);
+ pr_debug("%s: Has Palm Detect: %d\n",
+ __func__, data[8] & 1 ? 1 : 0);
+ pr_debug("%s: Has Rotate: %d\n",
+ __func__, data[8] & (1 << 1) ? 1 : 0);
+
+ retval = rmi_read_multiple(rmifninfo->sensor,
+ rmifninfo->funcDescriptor.controlBaseAddr, data, 14);
+ if (retval) {
+ printk(KERN_ERR "%s: RMI4 function $11 config:"
+ "Could not read control registers 0x%x\n",
+ __func__, rmifninfo->funcDescriptor.controlBaseAddr);
+ return retval;
+ }
+
+ /* Store these for use later...*/
+ sensorMaxX = ((data[6] & 0x1f) << 8) | ((data[7] & 0xff) << 0);
+ sensorMaxY = ((data[8] & 0x1f) << 8) | ((data[9] & 0xff) << 0);
+
+ pr_debug("%s: Sensor Max X: %d\n", __func__, sensorMaxX);
+ pr_debug("%s: Sensor Max Y: %d\n", __func__, sensorMaxY);
+ }
+
+ return retval;
+}
+EXPORT_SYMBOL(FN_11_config);
+
+/* This operation is done in a number of places, so we have a handy routine
+ * for it.
+ */
+static void f11_set_abs_params(struct rmi_function_device *function_device)
+{
+ struct f11_instance_data *instance_data = function_device->rfi->fndata;
+ /* Use the max X and max Y read from the device, or the clip values,
+ * whichever is stricter.
+ */
+ int xMin = instance_data->clipXLow;
+ int xMax = min((int) instance_data->controlRegisters->sensorMaxXPos, instance_data->clipXHigh);
+ int yMin = instance_data->clipYLow;
+ int yMax = min((int) instance_data->controlRegisters->sensorMaxYPos, instance_data->clipYHigh);
+ if (instance_data->swap_axes) {
+ int temp = xMin;
+ xMin = yMin;
+ yMin = temp;
+ temp = xMax;
+ xMax = yMax;
+ yMax = temp;
+ }
+ printk(KERN_INFO "%s: Set ranges X=[%d..%d] Y=[%d..%d].", __func__, xMin, xMax, yMin, yMax);
+ input_set_abs_params(function_device->input, ABS_X, xMin, xMax,
+ 0, 0);
+ input_set_abs_params(function_device->input, ABS_Y, yMin, yMax,
+ 0, 0);
+ input_set_abs_params(function_device->input, ABS_PRESSURE, 0, 255, 0, 0);
+ input_set_abs_params(function_device->input, ABS_TOOL_WIDTH, 0, 15, 0, 0);
+
+#ifdef CONFIG_SYNA_MULTI_TOUCH
+ input_set_abs_params(function_device->input, ABS_MT_TOUCH_MAJOR, 0, 15, 0, 0);
+ input_set_abs_params(function_device->input, ABS_MT_TOUCH_MINOR, 0, 15, 0, 0);
+ input_set_abs_params(function_device->input, ABS_MT_ORIENTATION, 0, 1, 0, 0);
+ input_set_abs_params(function_device->input, ABS_MT_TRACKING_ID, 1, 10, 0, 0);
+ input_set_abs_params(function_device->input, ABS_MT_POSITION_X, xMin, xMax,
+ 0, 0);
+ input_set_abs_params(function_device->input, ABS_MT_POSITION_Y, yMin, yMax,
+ 0, 0);
+#endif
+}
+
+/* Initialize any function $11 specific params and settings - input
+ * settings, device settings, etc.
+ */
+int FN_11_init(struct rmi_function_device *function_device)
+{
+ struct f11_instance_data *instanceData = function_device->rfi->fndata;
+ int retval = 0;
+ struct rmi_f11_functiondata *functiondata = rmi_sensor_get_functiondata(function_device->sensor, RMI_F11_INDEX);
+ printk(KERN_DEBUG "%s: RMI4 F11 init", __func__);
+
+ /* TODO: Initialize these through some normal kernel mechanism.
+ */
+ instanceData->flipX = false;
+ instanceData->flipY = false;
+ instanceData->swap_axes = false;
+ instanceData->relReport = true;
+ instanceData->offsetX = instanceData->offsetY = 0;
+ instanceData->clipXLow = instanceData->clipYLow = 0;
+ /* TODO: 65536 should actually be the largest valid RMI4 position coordinate */
+ instanceData->clipXHigh = instanceData->clipYHigh = 65536;
+
+ /* Load any overrides that were specified via platform data.
+ */
+ if (functiondata) {
+ printk(KERN_DEBUG "%s: found F11 per function platformdata.", __func__);
+ instanceData->flipX = functiondata->flipX;
+ instanceData->flipY = functiondata->flipY;
+ instanceData->swap_axes = functiondata->swap_axes;
+ if (functiondata->offset) {
+ instanceData->offsetX = functiondata->offset->x;
+ instanceData->offsetY = functiondata->offset->y;
+ }
+ if (functiondata->clipX) {
+ if (functiondata->clipX->min >= functiondata->clipX->max) {
+ printk(KERN_WARNING "%s: Clip X min (%d) >= X clip max (%d) - ignored.",
+ __func__, functiondata->clipX->min, functiondata->clipX->max);
+ } else {
+ instanceData->clipXLow = functiondata->clipX->min;
+ instanceData->clipXHigh = functiondata->clipX->max;
+ }
+ }
+ if (functiondata->clipY) {
+ if (functiondata->clipY->min >= functiondata->clipY->max) {
+ printk(KERN_WARNING "%s: Clip Y min (%d) >= Y clip max (%d) - ignored.",
+ __func__, functiondata->clipY->min, functiondata->clipY->max);
+ } else {
+ instanceData->clipYLow = functiondata->clipY->min;
+ instanceData->clipYHigh = functiondata->clipY->max;
+ }
+ }
+ }
+
+ /* need to init the input abs params for the 2D */
+ set_bit(EV_ABS, function_device->input->evbit);
+ set_bit(EV_SYN, function_device->input->evbit);
+ set_bit(EV_KEY, function_device->input->evbit);
+
+ f11_set_abs_params(function_device);
+
+ printk(KERN_DEBUG "%s: Creating sysfs files.", __func__);
+ retval = device_create_file(&function_device->dev, &dev_attr_flip);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create flip.", __func__);
+ return retval;
+ }
+ retval = device_create_file(&function_device->dev, &dev_attr_clip);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create clip.", __func__);
+ return retval;
+ }
+ retval = device_create_file(&function_device->dev, &dev_attr_offset);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create offset.", __func__);
+ return retval;
+ }
+ retval = device_create_file(&function_device->dev, &dev_attr_swap);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create swap.", __func__);
+ return retval;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(FN_11_init);
+
+int FN_11_detect(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr, unsigned int interruptCount)
+{
+ unsigned char fn11Queries[12]; /* TODO: Compute size correctly. */
+ unsigned char fn11Control[12]; /* TODO: Compute size correctly. */
+ int i;
+ unsigned short fn11InterruptOffset;
+ unsigned char fn11AbsDataBlockSize;
+ int fn11HasPinch, fn11HasFlick, fn11HasTap;
+ int fn11HasTapAndHold, fn11HasDoubleTap;
+ int fn11HasEarlyTap, fn11HasPress;
+ int fn11HasPalmDetect, fn11HasRotate;
+ int fn11HasRel;
+ unsigned char f11_egr_0, f11_egr_1;
+ unsigned int fn11AllDataBlockSize;
+ int retval = 0;
+ struct f11_instance_data *instanceData;
+
+ printk(KERN_DEBUG "%s: RMI4 F11 detect\n", __func__);
+
+ instanceData = kzalloc(sizeof(struct f11_instance_data), GFP_KERNEL);
+ if (!instanceData) {
+ printk(KERN_ERR "%s: Error allocating F11 instance data.\n", __func__);
+ return -ENOMEM;
+ }
+ instanceData->deviceInfo = kzalloc(sizeof(struct rmi_F11_device_query), GFP_KERNEL);
+ if (!instanceData->deviceInfo) {
+ printk(KERN_ERR "%s: Error allocating F11 device query.\n", __func__);
+ return -ENOMEM;
+ }
+ instanceData->sensorInfo = kzalloc(sizeof(struct rmi_F11_sensor_query), GFP_KERNEL);
+ if (!instanceData->sensorInfo) {
+ printk(KERN_ERR "%s: Error allocating F11 sensor query.\n", __func__);
+ return -ENOMEM;
+ }
+ rmifninfo->fndata = instanceData;
+
+ /* Store addresses - used elsewhere to read data,
+ * control, query, etc. */
+ rmifninfo->funcDescriptor.queryBaseAddr = fndescr->queryBaseAddr;
+ rmifninfo->funcDescriptor.commandBaseAddr = fndescr->commandBaseAddr;
+ rmifninfo->funcDescriptor.controlBaseAddr = fndescr->controlBaseAddr;
+ rmifninfo->funcDescriptor.dataBaseAddr = fndescr->dataBaseAddr;
+ rmifninfo->funcDescriptor.interruptSrcCnt = fndescr->interruptSrcCnt;
+ rmifninfo->funcDescriptor.functionNum = fndescr->functionNum;
+
+ rmifninfo->numSources = fndescr->interruptSrcCnt;
+
+ /* need to get number of fingers supported, data size, etc. -
+ to be used when getting data since the number of registers to
+ read depends on the number of fingers supported and data size. */
+ retval = rmi_read_multiple(rmifninfo->sensor, fndescr->queryBaseAddr, fn11Queries,
+ sizeof(fn11Queries));
+ if (retval) {
+ printk(KERN_ERR "%s: RMI4 function $11 detect: "
+ "Could not read function query registers 0x%x\n",
+ __func__, rmifninfo->funcDescriptor.queryBaseAddr);
+ return retval;
+ }
+
+ /* Extract device data. */
+ instanceData->deviceInfo->hasQuery9 = (fn11Queries[0] & 0x04) != 0;
+ instanceData->deviceInfo->numberOfSensors = (fn11Queries[0] & 0x07) + 1;
+ printk(KERN_DEBUG "%s: F11 device - %d sensors. Query 9? %d.", __func__, instanceData->deviceInfo->numberOfSensors, instanceData->deviceInfo->hasQuery9);
+
+ /* Extract sensor data. */
+ /* 2D data sources have only 3 bits for the number of fingers
+ supported - so the encoding is a bit wierd. */
+ instanceData->sensorInfo->numberOfFingers = 2; /* default number of fingers supported */
+ if ((fn11Queries[1] & 0x7) <= 4)
+ /* add 1 since zero based */
+ instanceData->sensorInfo->numberOfFingers = (fn11Queries[1] & 0x7) + 1;
+ else {
+ /* a value of 5 is up to 10 fingers - 6 and 7 are reserved
+ (shouldn't get these i int retval;n a normal 2D source). */
+ if ((fn11Queries[1] & 0x7) == 5)
+ instanceData->sensorInfo->numberOfFingers = 10;
+ }
+ instanceData->sensorInfo->configurable = (fn11Queries[1] & 0x80) != 0;
+ instanceData->sensorInfo->hasSensitivityAdjust = (fn11Queries[1] & 0x40) != 0;
+ instanceData->sensorInfo->hasGestures = (fn11Queries[1] & 0x20) != 0;
+ instanceData->sensorInfo->hasAbs = (fn11Queries[1] & 0x10) != 0;
+ instanceData->sensorInfo->hasRel = (fn11Queries[1] & 0x08) != 0;
+ instanceData->sensorInfo->absDataSize = fn11Queries[5] & 0x03;
+ printk(KERN_DEBUG "%s: Number of fingers: %d.", __func__, instanceData->sensorInfo->numberOfFingers);
+
+ /* Need to get interrupt info to be used later when handling
+ interrupts. */
+ rmifninfo->interruptRegister = interruptCount/8;
+
+ /* loop through interrupts for each source in fn $11 and or in a bit
+ to the interrupt mask for each. */
+ fn11InterruptOffset = interruptCount % 8;
+
+ for (i = fn11InterruptOffset;
+ i < ((fndescr->interruptSrcCnt & 0x7) + fn11InterruptOffset);
+ i++)
+ rmifninfo->interruptMask |= 1 << i;
+
+ /* Figure out just how much data we'll need to read. */
+ instanceData->fingerDataBufferSize = (instanceData->sensorInfo->numberOfFingers + 3) / 4;
+ /* One each for X and Y, one for LSB for X & Y, one for W, one for Z */
+ fn11AbsDataBlockSize = 5;
+ if (instanceData->sensorInfo->absDataSize != 0)
+ printk(KERN_WARNING "%s: Unrecognized abs data size %d ignored.", __func__, instanceData->sensorInfo->absDataSize);
+ if (instanceData->sensorInfo->hasAbs) {
+ instanceData->absDataSize = fn11AbsDataBlockSize;
+ instanceData->absDataOffset = instanceData->fingerDataBufferSize;
+ instanceData->fingerDataBufferSize += instanceData->sensorInfo->numberOfFingers * fn11AbsDataBlockSize;
+ }
+ if (instanceData->sensorInfo->hasRel) {
+ instanceData->relDataOffset = ((instanceData->sensorInfo->numberOfFingers + 3) / 4) +
+ /* absolute data, per finger times number of fingers */
+ (fn11AbsDataBlockSize * instanceData->sensorInfo->numberOfFingers);
+ instanceData->fingerDataBufferSize += instanceData->sensorInfo->numberOfFingers * 2;
+ }
+ if (instanceData->sensorInfo->hasGestures) {
+ instanceData->gestureDataOffset = instanceData->fingerDataBufferSize;
+ printk(KERN_WARNING "%s: WARNING Need to correctly compute gesture data location.", __func__);
+ }
+
+ /* need to determine the size of data to read - this depends on
+ conditions such as whether Relative data is reported and if Gesture
+ data is reported. */
+ f11_egr_0 = fn11Queries[7];
+ f11_egr_1 = fn11Queries[8];
+
+ /* Get info about what EGR data is supported, whether it has
+ Relative data supported, etc. */
+ fn11HasPinch = f11_egr_0 & 0x40;
+ fn11HasFlick = f11_egr_0 & 0x10;
+ fn11HasTap = f11_egr_0 & 0x01;
+ fn11HasTapAndHold = f11_egr_0 & 0x02;
+ fn11HasDoubleTap = f11_egr_0 & 0x04;
+ fn11HasEarlyTap = f11_egr_0 & 0x08;
+ fn11HasPress = f11_egr_0 & 0x20;
+ fn11HasPalmDetect = f11_egr_1 & 0x01;
+ fn11HasRotate = f11_egr_1 & 0x02;
+ fn11HasRel = fn11Queries[1] & 0x08;
+
+ /* Size of all data including finger status, absolute data for each
+ finger, relative data and EGR data */
+ fn11AllDataBlockSize =
+ /* finger status, four fingers per register */
+ ((instanceData->sensorInfo->numberOfFingers + 3) / 4) +
+ /* absolute data, per finger times number of fingers */
+ (fn11AbsDataBlockSize * instanceData->sensorInfo->numberOfFingers) +
+ /* two relative registers (if relative is being reported) */
+ 2 * fn11HasRel +
+ /* F11_2D_Data8 is only present if the egr_0
+ register is non-zero. */
+ !!(f11_egr_0) +
+ /* F11_2D_Data9 is only present if either egr_0 or
+ egr_1 registers are non-zero. */
+ (f11_egr_0 || f11_egr_1) +
+ /* F11_2D_Data10 is only present if EGR_PINCH or EGR_FLICK of
+ egr_0 reports as 1. */
+ !!(fn11HasPinch | fn11HasFlick) +
+ /* F11_2D_Data11 and F11_2D_Data12 are only present if
+ EGR_FLICK of egr_0 reports as 1. */
+ 2 * !!(fn11HasFlick);
+ instanceData->fingerDataBuffer = kcalloc(instanceData->fingerDataBufferSize, sizeof(unsigned char), GFP_KERNEL);
+ if (!instanceData->fingerDataBuffer) {
+ printk(KERN_ERR "%s: Failed to allocate finger data buffer.", __func__);
+ return -ENOMEM;
+ }
+
+ /* Grab a copy of the control registers. */
+ instanceData->controlRegisters = kzalloc(sizeof(struct rmi_F11_control), GFP_KERNEL);
+ if (!instanceData->controlRegisters) {
+ printk(KERN_ERR "%s: Error allocating F11 control registers.\n", __func__);
+ return -ENOMEM;
+ }
+ retval = rmi_read_multiple(rmifninfo->sensor, fndescr->controlBaseAddr,
+ fn11Control, sizeof(fn11Control));
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to read F11 control registers.", __func__);
+ return retval;
+ }
+ instanceData->controlRegisters->sensorMaxXPos = (((int) fn11Control[7] & 0x0F) << 8) + fn11Control[6];
+ instanceData->controlRegisters->sensorMaxYPos = (((int) fn11Control[9] & 0x0F) << 8) + fn11Control[8];
+ printk(KERN_DEBUG "%s: Max X %d Max Y %d", __func__, instanceData->controlRegisters->sensorMaxXPos, instanceData->controlRegisters->sensorMaxYPos);
+ return 0;
+}
+EXPORT_SYMBOL(FN_11_detect);
+
+static ssize_t rmi_fn_11_maxPos_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u %u\n", instance_data->controlRegisters->sensorMaxXPos, instance_data->controlRegisters->sensorMaxYPos);
+}
+
+static ssize_t rmi_fn_11_maxPos_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return -EPERM;
+}
+
+static ssize_t rmi_fn_11_flip_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u %u\n", instance_data->flipX, instance_data->flipY);
+}
+
+static ssize_t rmi_fn_11_flip_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+ unsigned int newX, newY;
+
+ printk(KERN_DEBUG "%s: Flip set to %s", __func__, buf);
+
+ if (sscanf(buf, "%u %u", &newX, &newY) != 2)
+ return -EINVAL;
+ if (newX < 0 || newX > 1 || newY < 0 || newY > 1)
+ return -EINVAL;
+ instance_data->flipX = newX;
+ instance_data->flipY = newY;
+
+ return count;
+}
+
+static ssize_t rmi_fn_11_swap_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u\n", instance_data->swap_axes);
+}
+
+static ssize_t rmi_fn_11_swap_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+ unsigned int newSwap;
+
+ printk(KERN_INFO "%s: Swap set to %s", __func__, buf);
+
+ if (sscanf(buf, "%u", &newSwap) != 1)
+ return -EINVAL;
+ if (newSwap < 0 || newSwap > 1)
+ return -EINVAL;
+ instance_data->swap_axes = newSwap;
+
+ f11_set_abs_params(fn);
+
+ return count;
+}
+
+static ssize_t rmi_fn_11_relreport_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u \n", instance_data->relReport);
+}
+
+static ssize_t rmi_fn_11_relreport_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+ unsigned int relRep;
+
+ printk(KERN_INFO "%s: relReport set to %s", __func__, buf);
+ if (sscanf(buf, "%u", &relRep) != 1)
+ return -EINVAL;
+ if (relRep < 0 || relRep > 1)
+ return -EINVAL;
+ instance_data->relReport = relRep;
+
+ return count;
+}
+
+static ssize_t rmi_fn_11_offset_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%d %d\n", instance_data->offsetX, instance_data->offsetY);
+}
+
+static ssize_t rmi_fn_11_offset_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+ int newX, newY;
+
+ printk(KERN_INFO "%s: Offset set to %s", __func__, buf);
+
+ if (sscanf(buf, "%d %d", &newX, &newY) != 2)
+ return -EINVAL;
+ instance_data->offsetX = newX;
+ instance_data->offsetY = newY;
+
+ return count;
+}
+
+static ssize_t rmi_fn_11_clip_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u %u %u %u\n",
+ instance_data->clipXLow, instance_data->clipXHigh,
+ instance_data->clipYLow, instance_data->clipYHigh);
+}
+
+static ssize_t rmi_fn_11_clip_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f11_instance_data *instance_data = (struct f11_instance_data *)fn->rfi->fndata;
+ unsigned int newXLow, newXHigh, newYLow, newYHigh;
+
+ printk(KERN_INFO "%s: Clip set to %s", __func__, buf);
+
+ if (sscanf(buf, "%u %u %u %u", &newXLow, &newXHigh, &newYLow, &newYHigh) != 4)
+ return -EINVAL;
+ if (newXLow < 0 || newXLow >= newXHigh || newYLow < 0 || newYLow >= newYHigh)
+ return -EINVAL;
+ instance_data->clipXLow = newXLow;
+ instance_data->clipXHigh = newXHigh;
+ instance_data->clipYLow = newYLow;
+ instance_data->clipYHigh = newYHigh;
+
+ f11_set_abs_params(fn);
+
+ return count;
+}
diff --git a/drivers/input/touchscreen/rmi_f11.h b/drivers/input/touchscreen/rmi_f11.h
new file mode 100644
index 0000000..0bf386a
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_f11.h
@@ -0,0 +1,43 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $11 header.
+ * Copyright (c) 2007 - 2010, Synaptics Incorporated
+ *
+ * For every RMI4 function that has a data source - like 2D sensors,
+ * buttons, LEDs, GPIOs, etc. - the user will create a new rmi_function_xx.c
+ * file and add these functions to perform the config(), init(), report()
+ * and detect() functionality. The function pointers are then srored under
+ * the RMI function info and these functions will automatically be called by
+ * the global config(), init(), report() and detect() functions that will
+ * loop through all data sources and call the data sources functions using
+ * these functions pointed to by the function ptrs.
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+#ifndef _RMI_FUNCTION_11_H
+#define _RMI_FUNCTION_11_H
+
+void FN_11_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int assertedIRQs);
+int FN_11_config(struct rmi_function_info *rmifninfo);
+int FN_11_init(struct rmi_function_device *function_device);
+int FN_11_detect(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr,
+ unsigned int interruptCount);
+/* No attention function for Fn $11 */
+#endif
diff --git a/drivers/input/touchscreen/rmi_f19.c b/drivers/input/touchscreen/rmi_f19.c
new file mode 100644
index 0000000..145f958
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_f19.c
@@ -0,0 +1,516 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $11 support for 2D.
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+
+#include "rmi.h"
+#include "rmi_drvr.h"
+#include "rmi_bus.h"
+#include "rmi_sensor.h"
+#include "rmi_function.h"
+#include "rmi_f19.h"
+#include "rmi_platformdata.h"
+
+
+struct f19_instance_data {
+ struct rmi_F19_query *deviceInfo;
+ struct rmi_F19_control *controlRegisters;
+ bool *buttonDown;
+ unsigned char buttonDataBufferSize;
+ unsigned char *buttonDataBuffer;
+ unsigned char *buttonMap;
+ int fn19ControlRegisterSize;
+ int fn19regCountForBitPerButton;
+ int fn19btnUsageandfilterModeOffset;
+ int fn19intEnableOffset;
+ int fn19intEnableLen;
+ int fn19singleBtnCtrlLen;
+ int fn19singleBtnCtrlOffset;
+ int fn19sensorMapCtrlOffset;
+ int fn19sensorMapCtrlLen;
+ int fn19singleBtnSensOffset;
+ int fn19singleBtnSensLen;
+ int fn19globalSensOffset;
+ int fn19globalHystThreshOffset;
+};
+
+static ssize_t rmi_f19_buttonCount_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_f19_buttonCount_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(buttonCount, 0444, rmi_f19_buttonCount_show, rmi_f19_buttonCount_store); /* RO attr */
+
+static ssize_t rmi_f19_buttonMap_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_f19_buttonMap_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+DEVICE_ATTR(buttonMap, 0664, rmi_f19_buttonMap_show, rmi_f19_buttonMap_store); /* RW attr */
+
+
+/*
+ * There is no attention function for F19 - it is left NULL
+ * in the function table so it is not called.
+ *
+ */
+
+
+/*
+ * This reads in a sample and reports the F19 source data to the
+ * input subsystem. It is used for both polling and interrupt driven
+ * operation. This is called a lot so don't put in any informational
+ * printks since they will slow things way down!
+ */
+void FN_19_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int assertedIRQs)
+{
+ struct rmi_function_device *function_device;
+ struct f19_instance_data *instanceData;
+ int button;
+
+ instanceData = (struct f19_instance_data *) rmifninfo->fndata;
+
+ function_device = rmifninfo->function_device;
+
+ /* Read the button data. */
+
+ if (rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.dataBaseAddr,
+ instanceData->buttonDataBuffer, instanceData->buttonDataBufferSize)) {
+ printk(KERN_ERR "%s: Failed to read button data registers.\n", __func__);
+ return;
+ }
+
+ /* Generate events for buttons that change state. */
+ for (button = 0; button < instanceData->deviceInfo->buttonCount; button++) {
+ int buttonReg;
+ int buttonShift;
+ bool buttonStatus;
+
+ /* determine which data byte the button status is in */
+ buttonReg = button/4;
+ /* bit shift to get button's status */
+ buttonShift = button % 8;
+ buttonStatus = ((instanceData->buttonDataBuffer[buttonReg] >> buttonShift) & 0x01) != 0;
+
+ /* if the button state changed from the last time report it and store the new state */
+ if (buttonStatus != instanceData->buttonDown[button]) {
+ printk(KERN_DEBUG "%s: Button %d (code %d) -> %d.", __func__, button, instanceData->buttonMap[button], buttonStatus);
+ /* Generate an event here. */
+ input_report_key(function_device->input,
+ instanceData->buttonMap[button], buttonStatus);
+ instanceData->buttonDown[button] = buttonStatus;
+ }
+ }
+
+ input_sync(function_device->input); /* sync after groups of events */
+}
+EXPORT_SYMBOL(FN_19_inthandler);
+
+int FN_19_config(struct rmi_function_info *rmifninfo)
+{
+ int retval = 0;
+
+ pr_debug("%s: RMI4 F19 config\n", __func__);
+
+ /* TODO: Perform configuration. In particular, write any cached control
+ * register values to the device. */
+
+ return retval;
+}
+EXPORT_SYMBOL(FN_19_config);
+
+/* Initialize any F19 specific params and settings - input
+ * settings, device settings, etc.
+ */
+int FN_19_init(struct rmi_function_device *function_device)
+{
+ int i, retval = 0;
+ struct f19_instance_data *instance_data = function_device->rfi->fndata;
+ struct rmi_f19_functiondata *functiondata = rmi_sensor_get_functiondata(function_device->sensor, RMI_F19_INDEX);
+
+ printk(KERN_DEBUG "%s: RMI4 F19 init\n", __func__);
+
+ if (functiondata) {
+ if (functiondata->button_map) {
+ if (functiondata->button_map->nbuttons != instance_data->deviceInfo->buttonCount) {
+ printk(KERN_WARNING "%s: Platformdata button map size (%d) != number of buttons on device (%d) - ignored.", __func__, functiondata->button_map->nbuttons, instance_data->deviceInfo->buttonCount);
+ } else if (!functiondata->button_map->map) {
+ printk(KERN_WARNING "%s: Platformdata button map is missing!", __func__);
+ } else {
+ for (i = 0; i < functiondata->button_map->nbuttons; i++)
+ instance_data->buttonMap[i] = functiondata->button_map->map[i];
+ }
+ }
+ }
+
+ /* Set up any input events. */
+ set_bit(EV_SYN, function_device->input->evbit);
+ set_bit(EV_KEY, function_device->input->evbit);
+ /* set bits for each button...*/
+ for (i = 0; i < instance_data->deviceInfo->buttonCount; i++) {
+ set_bit(instance_data->buttonMap[i], function_device->input->keybit);
+ }
+
+ printk(KERN_DEBUG "%s: Creating sysfs files.", __func__);
+ retval = device_create_file(&function_device->dev, &dev_attr_buttonCount);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create button count.", __func__);
+ return retval;
+ }
+
+ retval = device_create_file(&function_device->dev, &dev_attr_buttonMap);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to create button map.", __func__);
+ return retval;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(FN_19_init);
+
+int getControlRegisters(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr)
+{
+ struct f19_instance_data *instanceData;
+ unsigned char *fn19Control = NULL;
+ int retval = 0;
+
+ /* Get the instance data - it should have been allocated and stored in detect.*/
+ instanceData = rmifninfo->fndata;
+
+ /* Check to make sure instanceData is really there before using.*/
+ if (!instanceData) {
+ printk(KERN_ERR "%s: Error - instance data not initialized yet when getting fn19 control registers.\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Allocate memory for the control registers. */
+ instanceData->controlRegisters = kzalloc(sizeof(struct rmi_F19_control), GFP_KERNEL);
+ if (!instanceData->controlRegisters) {
+ printk(KERN_ERR "%s: Error allocating F19 control registers.\n", __func__);
+ return -ENOMEM;
+ }
+
+ instanceData->fn19regCountForBitPerButton = (instanceData->deviceInfo->buttonCount + 7)/8;
+
+ /* Need to compute the amount of data to read since it varies with the
+ * number of buttons */
+ instanceData->fn19ControlRegisterSize = 1 /* 1 for filter mode and button usage bits */
+ + 2*instanceData->fn19regCountForBitPerButton /* interrupt enable bits and single button participation bits */
+ + 2*instanceData->deviceInfo->buttonCount /* sensormap registers + single button sensitivity registers */
+ + 2; /* 1 for global sensitivity adjust + 1 for global hysteresis threshold */
+
+ /* Allocate a temp memory buffer to read the control registers into */
+ fn19Control = kzalloc(instanceData->fn19ControlRegisterSize, GFP_KERNEL);
+ if (!fn19Control) {
+ printk(KERN_ERR "%s: Error allocating temp storage to read fn19 control info.\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* Grab a copy of the control registers. */
+ retval = rmi_read_multiple(rmifninfo->sensor, fndescr->controlBaseAddr,
+ fn19Control, instanceData->fn19ControlRegisterSize);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed to read F19 control registers.", __func__);
+ return retval;
+ }
+
+ /* Copy over control registers data to the instance data */
+ instanceData->fn19btnUsageandfilterModeOffset = 0;
+ instanceData->controlRegisters->buttonUsage = fn19Control[instanceData->fn19btnUsageandfilterModeOffset] & 0x3;
+ instanceData->controlRegisters->filterMode = fn19Control[instanceData->fn19btnUsageandfilterModeOffset] & 0xc;
+
+ /* Fill in interrupt enable registers */
+ instanceData->fn19intEnableOffset = 1;
+ instanceData->fn19intEnableLen = instanceData->fn19regCountForBitPerButton;
+ instanceData->controlRegisters->intEnableRegisters = kzalloc(instanceData->fn19intEnableLen, GFP_KERNEL);
+ if (!instanceData->controlRegisters->intEnableRegisters) {
+ printk(KERN_ERR "%s: Error allocating storage for interrupt enable control info.\n", __func__);
+ return -ENOMEM;
+ }
+ memcpy(instanceData->controlRegisters->intEnableRegisters, &fn19Control[instanceData->fn19intEnableOffset],
+ instanceData->fn19intEnableLen);
+
+ /* Fill in single button control registers */
+ instanceData->fn19singleBtnCtrlOffset = instanceData->fn19intEnableOffset + instanceData->fn19intEnableLen;
+ instanceData->fn19singleBtnCtrlLen = instanceData->fn19regCountForBitPerButton;
+ instanceData->controlRegisters->singleButtonControl = kzalloc(instanceData->fn19singleBtnCtrlLen, GFP_KERNEL);
+ if (!instanceData->controlRegisters->singleButtonControl) {
+ printk(KERN_ERR "%s: Error allocating storage for single button participation control info.\n", __func__);
+ return -ENOMEM;
+ }
+ memcpy(instanceData->controlRegisters->singleButtonControl, &fn19Control[instanceData->fn19singleBtnCtrlOffset],
+ instanceData->fn19singleBtnCtrlLen);
+
+ /* Fill in sensor map registers */
+ instanceData->fn19sensorMapCtrlOffset = instanceData->fn19singleBtnCtrlOffset + instanceData->fn19singleBtnCtrlLen;
+ instanceData->fn19sensorMapCtrlLen = instanceData->deviceInfo->buttonCount;
+ instanceData->controlRegisters->sensorMap = kzalloc(instanceData->fn19sensorMapCtrlLen, GFP_KERNEL);
+ if (!instanceData->controlRegisters->sensorMap) {
+ printk(KERN_ERR "%s: Error allocating storage for sensor map control info.\n", __func__);
+ return -ENOMEM;
+ }
+ memcpy(instanceData->controlRegisters->sensorMap, &fn19Control[instanceData->fn19sensorMapCtrlOffset],
+ instanceData->fn19sensorMapCtrlLen);
+
+ /* Fill in single button sensitivity registers */
+ instanceData->fn19singleBtnSensOffset = instanceData->fn19sensorMapCtrlOffset + instanceData->fn19sensorMapCtrlLen;
+ instanceData->fn19singleBtnSensLen = instanceData->deviceInfo->buttonCount;
+ instanceData->controlRegisters->singleButtonSensitivity = kzalloc(instanceData->fn19singleBtnSensLen, GFP_KERNEL);
+ if (!instanceData->controlRegisters->intEnableRegisters) {
+ printk(KERN_ERR "%s: Error allocating storage for single button sensitivity control info.\n", __func__);
+ return -ENOMEM;
+ }
+ memcpy(instanceData->controlRegisters->singleButtonSensitivity, &fn19Control[instanceData->fn19singleBtnSensOffset],
+ instanceData->fn19singleBtnSensLen);
+
+ /* Fill in global sensitivity adjustment and global hysteresis threshold values */
+ instanceData->fn19globalSensOffset = instanceData->fn19singleBtnSensOffset + instanceData->fn19singleBtnSensLen;
+ instanceData->fn19globalHystThreshOffset = instanceData->fn19globalSensOffset + 1;
+ instanceData->controlRegisters->globalSensitivityAdjustment = fn19Control[instanceData->fn19globalSensOffset] & 0x1f;
+ instanceData->controlRegisters->globalHysteresisThreshold = fn19Control[instanceData->fn19globalHystThreshOffset] & 0x0f;
+
+ /* Free up temp storage that held copy of control registers */
+ kfree(fn19Control);
+
+ return 0;
+}
+
+int FN_19_detect(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr, unsigned int interruptCount)
+{
+ unsigned char fn19queries[2];
+ int fn19ControlRegisterSize;
+ unsigned char *fn19Control = NULL;
+ int retval = 0;
+ int i;
+ struct f19_instance_data *instanceData;
+ int fn19InterruptOffset;
+
+ printk(KERN_DEBUG "%s: RMI4 F19 detect\n", __func__);
+
+ instanceData = kzalloc(sizeof(struct f19_instance_data), GFP_KERNEL);
+ if (!instanceData) {
+ printk(KERN_ERR "%s: Error allocating F19 instance data.\n", __func__);
+ return -ENOMEM;
+ }
+ instanceData->deviceInfo = kzalloc(sizeof(struct rmi_F19_query), GFP_KERNEL);
+ if (!instanceData->deviceInfo) {
+ printk(KERN_ERR "%s: Error allocating F19 device query.\n", __func__);
+ return -ENOMEM;
+ }
+ rmifninfo->fndata = instanceData;
+
+ /* Store addresses - used elsewhere to read data,
+ * control, query, etc. */
+ rmifninfo->funcDescriptor.queryBaseAddr = fndescr->queryBaseAddr;
+ rmifninfo->funcDescriptor.commandBaseAddr = fndescr->commandBaseAddr;
+ rmifninfo->funcDescriptor.controlBaseAddr = fndescr->controlBaseAddr;
+ rmifninfo->funcDescriptor.dataBaseAddr = fndescr->dataBaseAddr;
+ rmifninfo->funcDescriptor.interruptSrcCnt = fndescr->interruptSrcCnt;
+ rmifninfo->funcDescriptor.functionNum = fndescr->functionNum;
+
+ rmifninfo->numSources = fndescr->interruptSrcCnt;
+
+ /* need to get number of fingers supported, data size, etc. -
+ to be used when getting data since the number of registers to
+ read depends on the number of fingers supported and data size. */
+ retval = rmi_read_multiple(rmifninfo->sensor, fndescr->queryBaseAddr, fn19queries,
+ sizeof(fn19queries));
+ if (retval) {
+ printk(KERN_ERR "%s: RMI4 F19 detect: "
+ "Could not read function query registers 0x%x\n",
+ __func__, rmifninfo->funcDescriptor.queryBaseAddr);
+ return retval;
+ }
+
+ /* Extract device data. */
+ instanceData->deviceInfo->configurable = fn19queries[0] & 0x01;
+ instanceData->deviceInfo->hasSensitivityAdjust = fn19queries[0] & 0x02;
+ instanceData->deviceInfo->hasHysteresisThreshold = fn19queries[0] & 0x04;
+ instanceData->deviceInfo->buttonCount = fn19queries[1] & 0x01F;
+ printk(KERN_DEBUG "%s: F19 device - %d buttons...", __func__, instanceData->deviceInfo->buttonCount);
+
+ /* Need to get interrupt info to be used later when handling
+ interrupts. */
+ rmifninfo->interruptRegister = interruptCount/8;
+
+ /* loop through interrupts for each source in fn $11 and or in a bit
+ to the interrupt mask for each. */
+ fn19InterruptOffset = interruptCount % 8;
+
+ for (i = fn19InterruptOffset;
+ i < ((fndescr->interruptSrcCnt & 0x7) + fn19InterruptOffset);
+ i++)
+ rmifninfo->interruptMask |= 1 << i;
+
+ /* Figure out just how much data we'll need to read. */
+ instanceData->buttonDown = kcalloc(instanceData->deviceInfo->buttonCount, sizeof(bool), GFP_KERNEL);
+ if (!instanceData->buttonDown) {
+ printk(KERN_ERR "%s: Error allocating F19 button state buffer.\n", __func__);
+ return -ENOMEM;
+ }
+
+ instanceData->buttonDataBufferSize = (instanceData->deviceInfo->buttonCount + 7) / 8;
+ instanceData->buttonDataBuffer = kcalloc(instanceData->buttonDataBufferSize, sizeof(unsigned char), GFP_KERNEL);
+ if (!instanceData->buttonDataBuffer) {
+ printk(KERN_ERR "%s: Failed to allocate button data buffer.", __func__);
+ return -ENOMEM;
+ }
+
+ instanceData->buttonMap = kcalloc(instanceData->deviceInfo->buttonCount, sizeof(unsigned char), GFP_KERNEL);
+ if (!instanceData->buttonMap) {
+ printk(KERN_ERR "%s: Error allocating F19 button map.\n", __func__);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < instanceData->deviceInfo->buttonCount; i++)
+ instanceData->buttonMap[i] = BTN_0 + i; /* default values */
+
+ /* Grab the control register info. */
+ retval = getControlRegisters(rmifninfo, fndescr);
+ if (retval) {
+ printk(KERN_ERR "%s: Error %d getting fn19 control register info.\n", __func__, retval);
+ return retval;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(FN_19_detect);
+
+static ssize_t rmi_f19_buttonCount_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f19_instance_data *instance_data = (struct f19_instance_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u\n", instance_data->deviceInfo->buttonCount);
+}
+
+static ssize_t rmi_f19_buttonCount_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ /* Not allowed. */
+ return -EPERM;
+}
+
+static ssize_t rmi_f19_buttonMap_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f19_instance_data *instance_data = (struct f19_instance_data *)fn->rfi->fndata;
+ int i, len, totalLen = 0;
+
+ /* loop through each button map value and copy it's string representation into buf */
+ for (i = 0; i < instance_data->deviceInfo->buttonCount; i++) {
+ /* get next button mapping value and write it to buf */
+ len = sprintf(buf, "%u ", instance_data->buttonMap[i]);
+ /* bump up ptr to next location in buf if the sprintf was valid */
+ if (len > 0) {
+ buf += len;
+ totalLen += len;
+ }
+ }
+
+ return totalLen;
+}
+
+static ssize_t rmi_f19_buttonMap_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct f19_instance_data *instance_data = (struct f19_instance_data *)fn->rfi->fndata;
+ unsigned int button;
+ int i;
+ int retval = count;
+ int buttonCount = 0;
+ unsigned char *tmpButtonMap;
+
+ /* Do validation on the button map data passed in. */
+ /* Store button mappings into a temp buffer and then verify button count
+ and data prior to clearing out old button mappings and storing the new ones. */
+ tmpButtonMap = kzalloc(instance_data->deviceInfo->buttonCount, GFP_KERNEL);
+ if (!tmpButtonMap) {
+ printk(KERN_ERR "%s: Error allocating temp button map.\n", __func__);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < instance_data->deviceInfo->buttonCount && *buf != 0; i++) {
+ /* get next button mapping value and store and bump up to point to next item in buf */
+ sscanf(buf, "%u", &button);
+
+ /* Make sure the key is a valid key */
+ if (button > KEY_MAX) {
+ printk(KERN_ERR "%s: Error - button map for button %d is not a valid value 0x%x.\n",
+ __func__, i, button);
+ retval = -EINVAL;
+ goto err_ret;
+ }
+
+ tmpButtonMap[i] = button;
+ buttonCount++;
+
+ /* bump up buf to point to next item to read */
+ while (*buf != 0) {
+ buf++;
+ if (*(buf-1) == ' ')
+ break;
+ }
+ }
+
+ /* Make sure the button count matches */
+ if (buttonCount != instance_data->deviceInfo->buttonCount) {
+ printk(KERN_ERR "%s: Error - button map count of %d doesn't match device button count of %d.\n"
+ , __func__, buttonCount, instance_data->deviceInfo->buttonCount);
+ retval = -EINVAL;
+ goto err_ret;
+ }
+
+ /* Clear out old buttonMap data */
+ memset(instance_data->buttonMap, 0, buttonCount);
+
+ /* Loop through the temp buffer and copy the button event and set the key bit for the new mapping. */
+ for (i = 0; i < buttonCount; i++) {
+ instance_data->buttonMap[i] = tmpButtonMap[1];
+ set_bit(instance_data->buttonMap[i], fn->input->keybit);
+ }
+
+err_ret:
+ kfree(tmpButtonMap);
+
+ return retval;
+}
diff --git a/drivers/input/touchscreen/rmi_f19.h b/drivers/input/touchscreen/rmi_f19.h
new file mode 100644
index 0000000..41f3e4d
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_f19.h
@@ -0,0 +1,43 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $11 header.
+ * Copyright (c) 2007 - 2010, Synaptics Incorporated
+ *
+ * For every RMI4 function that has a data source - like 2D sensors,
+ * buttons, LEDs, GPIOs, etc. - the user will create a new rmi_function_xx.c
+ * file and add these functions to perform the config(), init(), report()
+ * and detect() functionality. The function pointers are then srored under
+ * the RMI function info and these functions will automatically be called by
+ * the global config(), init(), report() and detect() functions that will
+ * loop through all data sources and call the data sources functions using
+ * these functions pointed to by the function ptrs.
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+#ifndef _RMI_FUNCTION_19_H
+#define _RMI_FUNCTION_19_H
+
+void FN_19_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int assertedIRQs);
+int FN_19_config(struct rmi_function_info *rmifninfo);
+int FN_19_init(struct rmi_function_device *function_device);
+int FN_19_detect(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr,
+ unsigned int interruptCount);
+/* No attention function for Fn $19 */
+#endif
diff --git a/drivers/input/touchscreen/rmi_f34.c b/drivers/input/touchscreen/rmi_f34.c
new file mode 100644
index 0000000..47ae5eb
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_f34.c
@@ -0,0 +1,552 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $34 support for sensor
+ * firmware reflashing.
+ *
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/input.h>
+#include <linux/sysfs.h>
+#include <linux/math64.h>
+#include "rmi_drvr.h"
+#include "rmi_bus.h"
+#include "rmi_sensor.h"
+#include "rmi_function.h"
+#include "rmi_f34.h"
+
+/* data specific to fn $34 that needs to be kept around */
+struct rmi_fn_34_data {
+ unsigned char status;
+ unsigned char cmd;
+ unsigned short bootloaderid;
+ unsigned short blocksize;
+};
+
+
+static ssize_t rmi_fn_34_status_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_34_status_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+
+static ssize_t rmi_fn_34_cmd_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_34_cmd_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+static ssize_t rmi_fn_34_data_read(struct kobject *kobj,
+ struct bin_attribute *attributes,
+ char *buf, loff_t pos, size_t count);
+
+static ssize_t rmi_fn_34_data_write(struct kobject *kobj,
+ struct bin_attribute *attributes,
+ char *buf, loff_t pos, size_t count);
+
+static ssize_t rmi_fn_34_bootloaderid_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_34_bootloaderid_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+static ssize_t rmi_fn_34_blocksize_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+
+static ssize_t rmi_fn_34_blocksize_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+/* define the device attributes using DEVICE_ATTR macros */
+DEVICE_ATTR(status, 0444, rmi_fn_34_status_show, rmi_fn_34_status_store); /* RO attr */
+DEVICE_ATTR(cmd, 0664, rmi_fn_34_cmd_show, rmi_fn_34_cmd_store); /* RW attr */
+DEVICE_ATTR(bootloaderid, 0644, rmi_fn_34_bootloaderid_show, rmi_fn_34_bootloaderid_store); /* RW attr */
+DEVICE_ATTR(blocksize, 0444, rmi_fn_34_blocksize_show, rmi_fn_34_blocksize_store); /* RO attr */
+
+
+struct bin_attribute dev_attr_data = {
+ .attr = {
+ .name = "data",
+ .mode = 0644
+ },
+ .size = 0,
+ .read = rmi_fn_34_data_read,
+ .write = rmi_fn_34_data_write,
+};
+
+/* Helper fn to convert from processor specific data to our firmware specific endianness.
+ * TODO: Should we use ntohs or something like that?
+ */
+void copyEndianAgnostic(unsigned char *dest, unsigned short src)
+{
+ dest[0] = src%0x100;
+ dest[1] = src/0x100;
+}
+
+/*.
+ * The interrupt handler for Fn $34.
+ */
+void FN_34_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int assertedIRQs)
+{
+ unsigned int status;
+ struct rmi_fn_34_data *fn34data = (struct rmi_fn_34_data *)rmifninfo->fndata;
+
+ /* Read the Fn $34 status register to see whether the previous command executed OK */
+ /* inform user space - through a sysfs param. */
+ if (rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.dataBaseAddr+3,
+ (unsigned char *)&status, 1)) {
+ printk(KERN_ERR "%s : Could not read status from 0x%x\n",
+ __func__, rmifninfo->funcDescriptor.dataBaseAddr+3);
+ status = 0xff; /* failure */
+ }
+
+ /* set a sysfs value that the user mode can read - only upper 4 bits are the status */
+ fn34data->status = status & 0xf0; /* successful is $80, anything else is failure */
+}
+EXPORT_SYMBOL(FN_34_inthandler);
+
+void FN_34_attention(struct rmi_function_info *rmifninfo)
+{
+
+}
+EXPORT_SYMBOL(FN_34_attention);
+
+int FN_34_config(struct rmi_function_info *rmifninfo)
+{
+ pr_debug("%s: RMI4 function $34 config\n", __func__);
+ return 0;
+}
+EXPORT_SYMBOL(FN_34_config);
+
+
+int FN_34_init(struct rmi_function_device *function_device)
+{
+ int retval = 0;
+ unsigned char uData[2];
+ struct rmi_function_info *rmifninfo = function_device->rfi;
+ struct rmi_fn_34_data *fn34data;
+
+ pr_debug("%s: RMI4 function $34 init\n", __func__);
+
+ /* Here we will need to set up sysfs files for Bootloader ID and Block size */
+ fn34data = kzalloc(sizeof(struct rmi_fn_34_data), GFP_KERNEL);
+ if (!fn34data) {
+ printk(KERN_ERR "%s: Error allocating memeory for rmi_fn_34_data.\n", __func__);
+ return -ENOMEM;
+ }
+ rmifninfo->fndata = (void *)fn34data;
+
+ /* set up sysfs file for Bootloader ID. */
+ if (sysfs_create_file(&function_device->dev.kobj, &dev_attr_bootloaderid.attr) < 0) {
+ printk(KERN_ERR "%s: Failed to create sysfs file for fn 34 bootloaderid.\n", __func__);
+ return -ENODEV;
+ }
+
+ /* set up sysfs file for Block Size. */
+ if (sysfs_create_file(&function_device->dev.kobj, &dev_attr_blocksize.attr) < 0) {
+ printk(KERN_ERR "%s: Failed to create sysfs file for fn 34 blocksize.\n", __func__);
+ return -ENODEV;
+ }
+
+ /* get the Bootloader ID and Block Size and store in the sysfs attributes. */
+ retval = rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.queryBaseAddr,
+ uData, 2);
+ if (retval) {
+ printk(KERN_ERR "%s : Could not read bootloaderid from 0x%x\n",
+ __func__, function_device->function->functionQueryBaseAddr);
+ return retval;
+ }
+ /* need to convert from our firmware storage to processore specific data */
+ fn34data->bootloaderid = (unsigned int)uData[0] + (unsigned int)uData[1]*0x100;
+
+ retval = rmi_read_multiple(rmifninfo->sensor, rmifninfo->funcDescriptor.queryBaseAddr+3,
+ uData, 2);
+ if (retval) {
+ printk(KERN_ERR "%s : Could not read block size from 0x%x\n",
+ __func__, rmifninfo->funcDescriptor.queryBaseAddr+3);
+ return retval;
+ }
+ /* need to convert from our firmware storage to processor specific data */
+ fn34data->blocksize = (unsigned int)uData[0] + (unsigned int)uData[1]*0x100;
+
+ /* set up sysfs file for status. */
+ if (sysfs_create_file(&function_device->dev.kobj, &dev_attr_status.attr) < 0) {
+ printk(KERN_ERR "%s: Failed to create sysfs file for fn 34 status.\n", __func__);
+ return -ENODEV;
+ }
+
+ /* Also, sysfs will need to have a file set up to distinguish between commands - like
+ Config write/read, Image write/verify.*/
+ /* set up sysfs file for command code. */
+ if (sysfs_create_file(&function_device->dev.kobj, &dev_attr_cmd.attr) < 0) {
+ printk(KERN_ERR "%s: Failed to create sysfs file for fn 34 cmd.\n", __func__);
+ return -ENODEV;
+ }
+
+ /* We will also need a sysfs file for the image/config block to write or read.*/
+ /* set up sysfs bin file for binary data block. Since the image is already in our format
+ there is no need to convert the data for endianess. */
+ if (sysfs_create_bin_file(&function_device->dev.kobj, &dev_attr_data) < 0) {
+ printk(KERN_ERR "%s: Failed to create sysfs file for fn 34 data.\n", __func__);
+ return -ENODEV;
+ }
+
+ return retval;
+}
+EXPORT_SYMBOL(FN_34_init);
+
+int FN_34_detect(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr, unsigned int interruptCount)
+{
+ int i;
+ int InterruptOffset;
+ int retval = 0;
+
+ pr_debug("%s: RMI4 function $34 detect\n", __func__);
+ if (rmifninfo->sensor == NULL) {
+ printk(KERN_ERR "%s: NULL sensor passed in!", __func__);
+ return -EINVAL;
+ }
+
+ /* Store addresses - used elsewhere to read data,
+ * control, query, etc. */
+ rmifninfo->funcDescriptor.queryBaseAddr = fndescr->queryBaseAddr;
+ rmifninfo->funcDescriptor.commandBaseAddr = fndescr->commandBaseAddr;
+ rmifninfo->funcDescriptor.controlBaseAddr = fndescr->controlBaseAddr;
+ rmifninfo->funcDescriptor.dataBaseAddr = fndescr->dataBaseAddr;
+ rmifninfo->funcDescriptor.interruptSrcCnt = fndescr->interruptSrcCnt;
+ rmifninfo->funcDescriptor.functionNum = fndescr->functionNum;
+
+ rmifninfo->numSources = fndescr->interruptSrcCnt;
+
+ /* Need to get interrupt info to be used later when handling
+ interrupts. */
+ rmifninfo->interruptRegister = interruptCount/8;
+
+ /* loop through interrupts for each source and or in a bit
+ to the interrupt mask for each. */
+ InterruptOffset = interruptCount % 8;
+
+ for (i = InterruptOffset;
+ i < ((fndescr->interruptSrcCnt & 0x7) + InterruptOffset);
+ i++) {
+ rmifninfo->interruptMask |= 1 << i;
+ }
+
+ return retval;
+}
+EXPORT_SYMBOL(FN_34_detect);
+
+static ssize_t rmi_fn_34_bootloaderid_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct rmi_fn_34_data *fn34data = (struct rmi_fn_34_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u\n", fn34data->bootloaderid);
+}
+
+static ssize_t rmi_fn_34_bootloaderid_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int error;
+ unsigned long val;
+ unsigned char uData[2];
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct rmi_fn_34_data *fn34data = (struct rmi_fn_34_data *)fn->rfi->fndata;
+
+ /* need to convert the string data to an actual value */
+ error = strict_strtoul(buf, 10, &val);
+
+ if (error)
+ return error;
+
+ fn34data->bootloaderid = val;
+
+ /* Write the Bootloader ID key data back to the first two Block Data registers
+ (F34_Flash_Data2.0 and F34_Flash_Data2.1).*/
+ copyEndianAgnostic(uData, (unsigned short)val);
+ error = rmi_write_multiple(fn->sensor, fn->function->functionDataBaseAddr,
+ uData, 2);
+ if (error) {
+ printk(KERN_ERR "%s : Could not write bootloader id to 0x%x\n",
+ __func__, fn->function->functionDataBaseAddr);
+ return error;
+ }
+
+ return count;
+}
+
+static ssize_t rmi_fn_34_blocksize_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct rmi_fn_34_data *fn34data = (struct rmi_fn_34_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u\n", fn34data->blocksize);
+}
+
+static ssize_t rmi_fn_34_blocksize_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ /* Block Size is RO so we shouldn't do anything if the
+ user space writes to the sysfs file. */
+
+ return -EPERM;
+}
+
+static ssize_t rmi_fn_34_status_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct rmi_fn_34_data *fn34data = (struct rmi_fn_34_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u\n", fn34data->status);
+}
+
+static ssize_t rmi_fn_34_status_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ /* Status is RO so we shouldn't do anything if the user
+ app writes to the sysfs file. */
+ return -EPERM;
+}
+
+static ssize_t rmi_fn_34_cmd_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct rmi_fn_34_data *fn34data = (struct rmi_fn_34_data *)fn->rfi->fndata;
+
+ return sprintf(buf, "%u\n", fn34data->cmd);
+}
+
+static ssize_t rmi_fn_34_cmd_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct rmi_fn_34_data *fn34data = (struct rmi_fn_34_data *)fn->rfi->fndata;
+ unsigned long val;
+ unsigned char cmd;
+ int error;
+
+ /* need to convert the string data to an actual value */
+ error = strict_strtoul(buf, 10, &val);
+
+ if (error)
+ return error;
+
+ fn34data->cmd = val;
+
+ /* determine the proper command to issue.
+ */
+ switch (val) {
+ case ENABLE_FLASH_PROG:
+ /* Issue a Flash Program Enable ($0F) command to the Flash Command
+ (F34_Flash_Data3, bits 3:0) field.*/
+ cmd = 0x0F;
+ error = rmi_write_multiple(fn->sensor, fn->function->functionDataBaseAddr+3,
+ (unsigned char *)&cmd, 1);
+ if (error) {
+ printk(KERN_ERR "%s : Could not write Flash Program Enable cmd to 0x%x\n",
+ __func__, fn->function->functionDataBaseAddr+3);
+ return error;
+ }
+ break;
+
+ case ERASE_ALL:
+ /* Issue a Erase All ($03) command to the Flash Command
+ (F34_Flash_Data3, bits 3:0) field.*/
+ cmd = 0x03;
+ error = rmi_write_multiple(fn->sensor, fn->function->functionDataBaseAddr+3,
+ (unsigned char *)&cmd, 1);
+ if (error) {
+ printk(KERN_ERR "%s : Could not write Erase All cmd to 0x%x\n",
+ __func__, fn->function->functionDataBaseAddr+3);
+ return error;
+ }
+ break;
+
+ case ERASE_CONFIG:
+ /* Issue a Erase Configuration ($07) command to the Flash Command
+ (F34_Flash_Data3, bits 3:0) field.*/
+ cmd = 0x07;
+ error = rmi_write_multiple(fn->sensor, fn->function->functionDataBaseAddr+3,
+ (unsigned char *)&cmd, 1);
+ if (error) {
+ printk(KERN_ERR "%s : Could not write Erase Configuration cmd to 0x%x\n",
+ __func__, fn->function->functionDataBaseAddr+3);
+ return error;
+ }
+ break;
+
+ case WRITE_FW_BLOCK:
+ /* Issue a Write Firmware Block ($02) command to the Flash Command
+ (F34_Flash_Data3, bits 3:0) field.*/
+ cmd = 0x02;
+ error = rmi_write_multiple(fn->sensor, fn->function->functionDataBaseAddr+3,
+ (unsigned char *)&cmd, 1);
+ if (error) {
+ printk(KERN_ERR "%s : Could not write Write Firmware Block cmd to 0x%x\n",
+ __func__, fn->function->functionDataBaseAddr+3);
+ return error;
+ }
+ break;
+
+ case WRITE_CONFIG_BLOCK:
+ /* Issue a Write Config Block ($06) command to the Flash Command
+ (F34_Flash_Data3, bits 3:0) field.*/
+ cmd = 0x06;
+ error = rmi_write_multiple(fn->sensor, fn->function->functionDataBaseAddr+3,
+ (unsigned char *)&cmd, 1);
+ if (error) {
+ printk(KERN_ERR "%s : Could not write Write Config Block cmd to 0x%x\n",
+ __func__, fn->function->functionDataBaseAddr+3);
+ return error;
+ }
+ break;
+
+ case READ_CONFIG_BLOCK:
+ /* Issue a Read Config Block ($05) command to the Flash Command
+ (F34_Flash_Data3, bits 3:0) field.*/
+ cmd = 0x05;
+ error = rmi_write_multiple(fn->sensor, fn->function->functionDataBaseAddr+3,
+ (unsigned char *)&cmd, 1);
+ if (error) {
+ printk(KERN_ERR "%s : Could not write Read Config Block cmd to 0x%x\n",
+ __func__, fn->function->functionDataBaseAddr+3);
+ return error;
+ }
+ break;
+
+ case DISABLE_FLASH_PROG:
+ /* Issue a reset command ($01) - this will reboot the sensor and ATTN will now go to
+ the Fn $01 instead of the Fn $34 since the sensor will no longer be in Flash mode. */
+ cmd = 0x01;
+ /*if ((error = rmi_write_multiple(fn->sensor, fn->sensor->sensorCommandBaseAddr,
+ (unsigned char *)&cmd, 1))) {
+ printk(KERN_ERR "%s : Could not write Reset cmd to 0x%x\n",
+ __func__, fn->sensor->sensorCommandBaseAddr);
+ return error;
+ }*/
+ break;
+
+ default:
+ pr_debug("%s: RMI4 function $34 - unknown command.\n", __func__);
+ break;
+ }
+
+ return count;
+}
+
+static ssize_t rmi_fn_34_data_read(struct kobject *kobj,
+ struct bin_attribute *attributes,
+ char *buf, loff_t pos, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ int error;
+
+ /* TODO: add check for count to verify it's the correct blocksize */
+
+ /* read the data from flash into buf. */
+ /* the app layer will be blocked at reading from the sysfs file. */
+ /* when we return the count (or error if we fail) the app will resume. */
+ error = rmi_read_multiple(fn->sensor, fn->function->functionDataBaseAddr+pos,
+ (unsigned char *)buf, count);
+ if (error) {
+ printk(KERN_ERR "%s : Could not read data from 0x%llx\n",
+ __func__, fn->function->functionDataBaseAddr+pos);
+ return error;
+ }
+
+ return count;
+}
+
+static ssize_t rmi_fn_34_data_write(struct kobject *kobj,
+ struct bin_attribute *attributes,
+ char *buf, loff_t pos, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct rmi_function_device *fn = dev_get_drvdata(dev);
+ struct rmi_fn_34_data *fn34data = (struct rmi_fn_34_data *)fn->rfi->fndata;
+ unsigned int blocknum;
+ int error;
+
+ /* write the data from buf to flash. */
+ /* the app layer will be blocked at writing to the sysfs file. */
+ /* when we return the count (or error if we fail) the app will resume. */
+
+ /* TODO: Add check on count - if non-zero veriy it's the correct blocksize */
+
+ /* Verify that the byte offset is always aligned on a block boundary and if not
+ return an error. We can't just use the mod operator % and do a (pos % fn34data->blocksize) because of a gcc
+ bug that results in undefined symbols. So we have to compute it the hard
+ way. Grumble. */
+ unsigned int remainder;
+ div_u64_rem(pos, fn34data->blocksize, &remainder);
+ if (remainder) {
+ printk(KERN_ERR "%s : Invalid byte offset of %llx leads to invalid block number.\n",
+ __func__, pos);
+ return -EINVAL;
+ }
+
+ /* Compute the block number using the byte offset (pos) and the block size.
+ once again, we can't just do a divide due to a gcc bug. */
+ blocknum = div_u64(pos, fn34data->blocksize);
+
+ /* Write the block number first */
+ error = rmi_write_multiple(fn->sensor, fn->function->functionDataBaseAddr,
+ (unsigned char *)&blocknum, 2);
+ if (error) {
+ printk(KERN_ERR "%s : Could not write block number to 0x%x\n",
+ __func__, fn->function->functionDataBaseAddr);
+ return error;
+ }
+
+ /* Write the data block - only if the count is non-zero */
+ if (count) {
+ error = rmi_write_multiple(fn->sensor, fn->function->functionDataBaseAddr+2,
+ (unsigned char *)buf, count);
+ if (error) {
+ printk(KERN_ERR "%s : Could not write block data to 0x%x\n",
+ __func__, fn->function->functionDataBaseAddr+2);
+ return error;
+ }
+ }
+
+ return count;
+}
diff --git a/drivers/input/touchscreen/rmi_f34.h b/drivers/input/touchscreen/rmi_f34.h
new file mode 100644
index 0000000..48293e3
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_f34.h
@@ -0,0 +1,50 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function $34 header.
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ * There is only one function $34 for each RMI4 sensor. This will be
+ * the function that is used to reflash the firmware and get the
+ * boot loader address and the boot image block size.
+ *
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+#ifndef _RMI_FUNCTION_34_H
+#define _RMI_FUNCTION_34_H
+
+/* define fn $34 commands */
+#define WRITE_FW_BLOCK 2
+#define ERASE_ALL 3
+#define READ_CONFIG_BLOCK 5
+#define WRITE_CONFIG_BLOCK 6
+#define ERASE_CONFIG 7
+#define ENABLE_FLASH_PROG 15
+#define DISABLE_FLASH_PROG 16
+
+void FN_34_inthandler(struct rmi_function_info *rmifninfo,
+ unsigned int assertedIRQs);
+int FN_34_config(struct rmi_function_info *rmifninfo);
+int FN_34_init(struct rmi_function_device *function_device);
+int FN_34_detect(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr,
+ unsigned int interruptCount);
+void FN_34_attention(struct rmi_function_info *rmifninfo);
+
+#endif
diff --git a/drivers/input/touchscreen/rmi_function.c b/drivers/input/touchscreen/rmi_function.c
new file mode 100644
index 0000000..f9b9833
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_function.c
@@ -0,0 +1,320 @@
+/**
+ * Synaptics Register Mapped Interface (RMI4) - RMI Function Module.
+ * Copyright (C) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+static const char functionname[10] = "fn";
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/hrtimer.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+
+#include "rmi_drvr.h"
+#include "rmi_function.h"
+#include "rmi_bus.h"
+#include "rmi_sensor.h"
+#include "rmi_f01.h"
+#include "rmi_f11.h"
+#include "rmi_f19.h"
+#include "rmi_f34.h"
+
+/* Each time a new RMI4 function support is added the developer needs to
+bump the number of supported functions and add the info for
+that RMI4 function to the array along with pointers to the report,
+config, init and detect functions that they coded in rmi_fxx.c
+and rmi_fxx.h - where xx is the RMI4 function number in hex for the new
+RMI4 data source function. The information for the RMI4 functions is
+obtained from the RMI4 specification document.
+ */
+#define rmi4_num_supported_data_src_fns 4
+
+/* supported RMI4 functions list - controls what we
+ * will provide support for - if it's not in the list then
+ * the developer needs to add support functions for it.*/
+static LIST_HEAD(fns_list);
+static DEFINE_MUTEX(fns_mutex);
+
+/* NOTE: Developer - add in any new RMI4 fn data info - function number
+ * and ptrs to report, config, init and detect functions. This data is
+ * used to point to the functions that need to be called to config, init,
+ * detect and report data for the new RMI4 function. Refer to the RMI4
+ * specification for information on RMI4 functions.
+ */
+/* TODO: This will eventually go away, and each function will be an independent
+ * module. */
+static struct rmi_functions_data
+ rmi4_supported_data_src_functions[rmi4_num_supported_data_src_fns] = {
+ /* Fn $11 - 2D sensing */
+ {.functionNumber = 0x11, .inthandlerFn = FN_11_inthandler, .configFn = FN_11_config, .initFn = FN_11_init, .detectFn = FN_11_detect, .attnFn = NULL},
+ /* Fn $01 - device control */
+ {.functionNumber = 0x01, .inthandlerFn = FN_01_inthandler, .configFn = FN_01_config, .initFn = FN_01_init, .detectFn = FN_01_detect, .attnFn = FN_01_attention},
+ /* Fn $19 - buttons */
+ {.functionNumber = 0x19, .inthandlerFn = FN_19_inthandler, .configFn = FN_19_config, .initFn = FN_19_init, .detectFn = FN_19_detect, .attnFn = NULL},
+ /* Fn $34 - firmware reflash */
+ {.functionNumber = 0x34, .inthandlerFn = FN_34_inthandler, .configFn = FN_34_config, .initFn = FN_34_init, .detectFn = FN_34_detect, .attnFn = FN_34_attention},
+};
+
+
+/* This function is here to provide a way for external modules to access the
+ * functions list. It will try to find a matching function base on the passed
+ * in RMI4 function number and return the pointer to the struct rmi_functions
+ * if a match is found or NULL if not found.
+ */
+struct rmi_functions *rmi_find_function(int functionNum)
+{
+ struct rmi_functions *fn;
+ bool found = false;
+
+ list_for_each_entry(fn, &fns_list, link) {
+ if (functionNum == fn->functionNum) {
+ found = true;
+ break;
+ }
+ }
+
+ if (!found)
+ return NULL;
+ else
+ return fn;
+}
+EXPORT_SYMBOL(rmi_find_function);
+
+
+static void rmi_function_config(struct rmi_function_device *function)
+{
+ printk(KERN_DEBUG "%s: rmi_function_config", __func__);
+
+}
+
+/**
+ * This is the probe function passed to the RMI4 subsystem that gives us a
+ * chance to recognize an RMI4 function.
+ */
+static int rmi_function_probe(struct rmi_function_driver *function)
+{
+ struct rmi_phys_driver *rpd;
+
+ rpd = function->rpd;
+
+ if (!rpd) {
+ printk(KERN_ERR "%s: Invalid rmi physical driver - null ptr.", __func__);
+ return 0;
+ }
+
+ return 1;
+}
+
+/** Just a stub for now.
+ */
+static int rmi_function_suspend(struct device *dev, pm_message_t state)
+{
+ printk(KERN_INFO "%s: function suspend called.", __func__);
+ return 0;
+}
+
+/** Just a stub for now.
+ */
+static int rmi_function_resume(struct device *dev)
+{
+ printk(KERN_INFO "%s: function resume called.", __func__);
+ return 0;
+}
+
+int rmi_function_register_driver(struct rmi_function_driver *drv, int fnNumber)
+{
+ int retval;
+ char *drvrname;
+
+ printk(KERN_INFO "%s: Registering function driver for F%02x.\n", __func__, fnNumber);
+
+ retval = 0;
+
+ /* Create a function device and function driver for this Fn */
+ drvrname = kzalloc(sizeof(functionname) + 4, GFP_KERNEL);
+ if (!drvrname) {
+ printk(KERN_ERR "%s: Error allocating memeory for rmi_function_driver name.\n", __func__);
+ return -ENOMEM;
+ }
+ sprintf(drvrname, "fn%02x", fnNumber);
+
+ drv->drv.name = drvrname;
+ drv->module = drv->drv.owner;
+
+ drv->drv.suspend = rmi_function_suspend;
+ drv->drv.resume = rmi_function_resume;
+
+ /* register the sensor driver */
+ retval = driver_register(&drv->drv);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed driver_register %d\n",
+ __func__, retval);
+ }
+
+ return retval;
+}
+EXPORT_SYMBOL(rmi_function_register_driver);
+
+void rmi_function_unregister_driver(struct rmi_function_driver *drv)
+{
+ printk(KERN_INFO "%s: Unregistering function driver.\n", __func__);
+
+ driver_unregister(&drv->drv);
+}
+EXPORT_SYMBOL(rmi_function_unregister_driver);
+
+int rmi_function_register_device(struct rmi_function_device *function_device, int fnNumber)
+{
+ struct input_dev *input;
+ int retval;
+
+ printk(KERN_INFO "%s: Registering function device for F%02x.\n", __func__, fnNumber);
+
+ retval = 0;
+
+ /* make name - fn11, fn19, etc. */
+ dev_set_name(&function_device->dev, "%sfn%02x", function_device->sensor->drv.name, fnNumber);
+ dev_set_drvdata(&function_device->dev, function_device);
+ retval = device_register(&function_device->dev);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed device_register for function device.\n",
+ __func__);
+ return retval;
+ }
+
+ input = input_allocate_device();
+ if (input == NULL) {
+ printk(KERN_ERR "%s: Failed to allocate memory for a "
+ "new input device.\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ input->name = dev_name(&function_device->dev);
+ input->phys = "rmi_function";
+ function_device->input = input;
+
+
+ /* init any input specific params for this function */
+ function_device->rmi_funcs->init(function_device);
+
+ retval = input_register_device(input);
+
+ if (retval) {
+ printk(KERN_ERR "%s: Failed input_register_device.\n",
+ __func__);
+ return retval;
+ }
+
+
+ rmi_function_config(function_device);
+
+ return retval;
+}
+EXPORT_SYMBOL(rmi_function_register_device);
+
+void rmi_function_unregister_device(struct rmi_function_device *dev)
+{
+ printk(KERN_INFO "%s: Unregistering function device.n", __func__);
+
+ input_unregister_device(dev->input);
+ device_unregister(&dev->dev);
+}
+EXPORT_SYMBOL(rmi_function_unregister_device);
+
+static int __init rmi_function_init(void)
+{
+ struct rmi_functions_data *rmi4_fn;
+ int i;
+
+ printk(KERN_DEBUG "%s: RMI Function Init\n", __func__);
+
+ /* Initialize global list of RMI4 Functions.
+ We need to add the supported RMI4 funcions so that we will have
+ pointers to the associated functions for init, config, report and
+ detect. See rmi.h for more details. The developer will add a new
+ RMI4 function number in the array in rmi_drvr.h, then add a new file to
+ the build (called rmi_fXX.c where XX is the hex number for
+ the added RMI4 function). The rest should be automatic.
+ */
+
+ /* for each function number defined in rmi.h creat a new rmi_function
+ struct and initialize the pointers to the servicing functions and then
+ add it into the global list for function support.
+ */
+ for (i = 0; i < rmi4_num_supported_data_src_fns; i++) {
+ /* Add new rmi4 function struct to list */
+ struct rmi_functions *fn = kzalloc(sizeof(*fn), GFP_KERNEL);
+ if (!fn) {
+ printk(KERN_ERR "%s: could not allocate memory "
+ "for rmi_function struct for function 0x%x\n",
+ __func__,
+ rmi4_supported_data_src_functions[i].functionNumber);
+ return -ENOMEM;
+ } else {
+
+ rmi4_fn = &rmi4_supported_data_src_functions[i];
+ fn->functionNum = rmi4_fn->functionNumber;
+ /* Fill in ptrs to functions. The functions are
+ linked in from a file called rmi_fxx.c
+ where xx is the hex number of the RMI4 function
+ from the RMI4 spec. Also, the function prototypes
+ need to be added to rmi_fxx.h - also where
+ xx is the hex number of the RMI4 function. So
+ that you don't get compile errors and that new
+ header needs to be included in the rmi_function.h
+ */
+ fn->inthandler = rmi4_fn->inthandlerFn;
+ fn->config = rmi4_fn->configFn;
+ fn->init = rmi4_fn->initFn;
+ fn->detect = rmi4_fn->detectFn;
+ fn->attention = rmi4_fn->attnFn;
+
+ /* Add the new fn to the global list */
+ mutex_lock(&fns_mutex);
+ list_add_tail(&fn->link, &fns_list);
+ mutex_unlock(&fns_mutex);
+ }
+ }
+
+ return 0;
+}
+
+static void __exit rmi_function_exit(void)
+{
+ printk(KERN_DEBUG "%s: RMI Function Exit\n", __func__);
+}
+
+
+module_init(rmi_function_init);
+module_exit(rmi_function_exit);
+
+MODULE_AUTHOR("Synaptics, Inc.");
+MODULE_DESCRIPTION("RMI4 Function Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/rmi_function.h b/drivers/input/touchscreen/rmi_function.h
new file mode 100644
index 0000000..801609b
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_function.h
@@ -0,0 +1,213 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) Function Device Header File.
+ * Copyright (c) 2007 - 2011, Synaptics Incorporated
+ *
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#ifndef _RMI_FUNCTION_H
+#define _RMI_FUNCTION_H
+
+#include <linux/input.h>
+#include <linux/device.h>
+
+
+/* For each function present on the RMI device, there will be a corresponding
+ * entry in the functions list of the rmi_sensor_driver structure. This entry
+ * gives information about the number of data sources and the number of data
+ * registers associated with the function.
+ */
+struct rmi_function_info {
+ /* The sensor this function belongs to.
+ */
+ struct rmi_sensor_driver *sensor;
+
+ /* A device associated with this function.
+ */
+ struct rmi_function_device *function_device;
+
+ unsigned char functionNum;
+
+ /* This is the number of data sources associated with the function.*/
+ unsigned char numSources;
+
+ /* This is the number of data registers to read.*/
+ unsigned char dataRegBlockSize;
+
+ /* This is the interrupt register and mask - needed for enabling the
+ * interrupts and for checking what source had caused the attention line
+ * interrupt.
+ */
+ unsigned char interruptRegister;
+ unsigned char interruptMask;
+
+ /* This is the RMI function descriptor associated with this function.
+ * It contains the Base addresses for the functions query, command,
+ * control, and data registers.
+ */
+ struct rmi_function_descriptor funcDescriptor;
+
+ /* pointer to data specific to a functions implementation. */
+ void *fndata;
+
+ /* A list of the function information.
+ * This list uses the standard kernel linked list implementation.
+ * Documentation on on how to use it can be found at
+ * http://isis.poly.edu/kulesh/stuff/src/klist/.
+ */
+ struct list_head link;
+};
+
+
+/* This struct is for creating a list of RMI4 functions that have data sources
+associated with them. This is to facilitate adding new support for other
+data sources besides 2D sensors.
+To add a new data source support, the developer will create a new file
+and add these 4 functions below with FN$## in front of the names - where
+## is the hex number for the function taken from the RMI4 specification.
+
+The function number will be associated with this and later will be used to
+match the RMI4 function to the 4 functions for that RMI4 function number.
+The user will also have to add code that adds the new rmi_functions item
+to the global list of RMI4 functions and stores the pointers to the 4
+functions in the function pointers.
+ */
+struct rmi_functions {
+ unsigned char functionNum;
+
+ /* Pointers to function specific functions for interruptHandler, config, init
+ , detect and attention. */
+ /* These ptrs. need to be filled in for every RMI4 function that has
+ data source(s) associated with it - like fn $11 (2D sensors),
+ fn $19 (buttons), etc. Each RMI4 function that has data sources
+ will be added into a list that is used to match the function
+ number against the number stored here.
+ */
+ /* The sensor implementation will call this whenever and IRQ is
+ * dispatched that this function is interested in.
+ */
+ void (*inthandler)(struct rmi_function_info *rfi, unsigned int assertedIRQs);
+
+ int (*config)(struct rmi_function_info *rmifninfo);
+ int (*init)(struct rmi_function_device *function_device);
+ int (*detect)(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr,
+ unsigned int interruptCount);
+ /** If this is non-null, the sensor implemenation will call this
+ * whenever the ATTN line is asserted.
+ */
+ void (*attention)(struct rmi_function_info *rmifninfo);
+
+
+ /* Standard kernel linked list implementation.
+ * Documentation on how to use it can be found at
+ * http://isis.poly.edu/kulesh/stuff/src/klist/.
+ */
+ struct list_head link;
+};
+
+
+typedef void(*inthandlerFuncPtr)(struct rmi_function_info *rfi, unsigned int assertedIRQs);
+typedef int(*configFuncPtr)(struct rmi_function_info *rmifninfo);
+typedef int(*initFuncPtr)(struct rmi_function_device *function_device);
+typedef int(*detectFuncPtr)(struct rmi_function_info *rmifninfo,
+ struct rmi_function_descriptor *fndescr,
+ unsigned int interruptCount);
+typedef void (*attnFuncPtr)(struct rmi_function_info *rmifninfo);
+
+struct rmi_functions_data {
+ int functionNumber;
+ inthandlerFuncPtr inthandlerFn;
+ configFuncPtr configFn;
+ initFuncPtr initFn;
+ detectFuncPtr detectFn;
+ attnFuncPtr attnFn;
+};
+
+
+struct rmi_functions *rmi_find_function(int functionNum);
+int rmi_functions_init(struct input_dev *inputdev);
+
+struct rmi_function_driver {
+ struct module *module;
+ struct device_driver drv;
+
+ /* Probe Function
+ * This function is called to give the function driver layer an
+ * opportunity to claim an RMI function.
+ */
+ int (*probe)(struct rmi_function_driver *function);
+ /* Config Function
+ * This function is called after a successful probe. It gives the
+ * function driver an opportunity to query and/or configure an RMI
+ * function before data starts flowing.
+ */
+ void (*config)(struct rmi_function_driver *function);
+
+ unsigned short functionQueryBaseAddr; /* RMI4 function control */
+ unsigned short functionControlBaseAddr;
+ unsigned short functionCommandBaseAddr;
+ unsigned short functionDataBaseAddr;
+ unsigned int interruptRegisterOffset; /* offset from start of interrupt registers */
+ unsigned int interruptMask;
+
+ /* pointer to the corresponding phys driver info for this sensor */
+ /* The phys driver has the pointers to read, write, etc. */
+ /* Probably don't need it here - used down in bus driver and sensor driver */
+ struct rmi_phys_driver *rpd;
+
+ /* Standard kernel linked list implementation.
+ * Documentation on how to use it can be found at
+ * http://isis.poly.edu/kulesh/stuff/src/klist/.
+ */
+ struct list_head function_drivers; /* link function drivers into list */
+};
+
+struct rmi_function_device {
+ struct rmi_function_driver *function;
+ struct device dev;
+ struct input_dev *input;
+ struct rmi_sensor_driver *sensor; /* need this to be bound to phys driver layer */
+
+ /* the function ptrs to the config, init, detect and
+ report fns for this rmi function device. */
+ struct rmi_functions *rmi_funcs;
+ struct rmi_function_info *rfi;
+
+ /** An RMI sensor might actually have several IRQ registers -
+ * this tells us which IRQ register this function is interested in.
+ */
+ unsigned int irqRegisterSet;
+
+ /** This is a mask of the IRQs the function is interested in.
+ */
+ unsigned int irqMask;
+
+ /* Standard kernel linked list implementation.
+ * Documentation on how to use it can be found at
+ * http://isis.poly.edu/kulesh/stuff/src/klist/.
+ */
+ struct list_head functions; /* link functions into list */
+};
+
+int rmi_function_register_device(struct rmi_function_device *dev, int fnNumber);
+
+#endif
diff --git a/drivers/input/touchscreen/rmi_sensor.c b/drivers/input/touchscreen/rmi_sensor.c
new file mode 100644
index 0000000..8b0dc35
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_sensor.c
@@ -0,0 +1,588 @@
+/**
+ * Synaptics Register Mapped Interface (RMI4) - RMI Sensor Module.
+ * Copyright (C) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+static const char sensorname[] = "sensor";
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/hrtimer.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+
+
+#include "rmi_drvr.h"
+#include "rmi_bus.h"
+#include "rmi_function.h"
+#include "rmi_sensor.h"
+
+long polltime = 25000000; /* Shared with rmi_function.c. */
+EXPORT_SYMBOL(polltime);
+module_param(polltime, long, 0644);
+MODULE_PARM_DESC(polltime, "How long to wait between polls (in nano seconds).");
+
+
+#define PDT_START_SCAN_LOCATION 0x00E9
+#define PDT_END_SCAN_LOCATION 0x0005
+#define PDT_ENTRY_SIZE 0x0006
+
+static DEFINE_MUTEX(rfi_mutex);
+
+struct rmi_functions *rmi_find_function(int functionNum);
+
+int rmi_read(struct rmi_sensor_driver *sensor, unsigned short address, char *dest)
+{
+ struct rmi_phys_driver *rpd = sensor->rpd;
+ if (!rpd)
+ return -ENODEV;
+ return rpd->read(rpd, address, dest);
+}
+EXPORT_SYMBOL(rmi_read);
+
+int rmi_write(struct rmi_sensor_driver *sensor, unsigned short address,
+ unsigned char data)
+{
+ struct rmi_phys_driver *rpd = sensor->rpd;
+ if (!rpd)
+ return -ENODEV;
+ return rpd->write(rpd, address, data);
+}
+EXPORT_SYMBOL(rmi_write);
+
+int rmi_read_multiple(struct rmi_sensor_driver *sensor, unsigned short address,
+ char *dest, int length)
+{
+ struct rmi_phys_driver *rpd = sensor->rpd;
+ if (!rpd)
+ return -ENODEV;
+ return rpd->read_multiple(rpd, address, dest, length);
+}
+EXPORT_SYMBOL(rmi_read_multiple);
+
+int rmi_write_multiple(struct rmi_sensor_driver *sensor, unsigned short address,
+ unsigned char *data, int length)
+{
+ struct rmi_phys_driver *rpd = sensor->rpd;
+ if (!rpd)
+ return -ENODEV;
+ return rpd->write_multiple(rpd, address, data, length);
+}
+EXPORT_SYMBOL(rmi_write_multiple);
+
+bool rmi_polling_required(struct rmi_sensor_driver *sensor)
+{
+ return sensor->polling_required;
+}
+EXPORT_SYMBOL(rmi_polling_required);
+
+/** Functions can call this in order to dispatch IRQs. */
+void dispatchIRQs(struct rmi_sensor_driver *sensor, unsigned int irqStatus)
+{
+ struct rmi_function_info *functionInfo;
+
+
+ list_for_each_entry(functionInfo, &sensor->functions, link) {
+ if ((functionInfo->interruptMask & irqStatus)) {
+ if (functionInfo->function_device->rmi_funcs->inthandler) {
+ /* Call the functions interrupt handler function. */
+ functionInfo->function_device->rmi_funcs->inthandler(functionInfo, (functionInfo->interruptMask & irqStatus));
+ }
+ }
+ }
+}
+
+/**
+ * This is the function we pass to the RMI4 subsystem so we can be notified
+ * when attention is required. It may be called in interrupt context.
+ */
+static void attention(struct rmi_phys_driver *physdrvr, int instance)
+{
+ /* All we have to do is schedule work. */
+
+ /* TODO: It's possible that workIsReady is not really needed anymore.
+ * Investigate this to see if the race condition between setting up
+ * the work and enabling the interrupt still exists. */
+ if (physdrvr->sensor->workIsReady) {
+ schedule_work(&(physdrvr->sensor->work));
+ } else {
+ /* Got an interrupt but we're not ready so enable the irq so it doesn't get hung up */
+ printk(KERN_DEBUG "%s: Work not initialized yet - enabling irqs.\n", __func__);
+ enable_irq(physdrvr->irq);
+ }
+}
+
+/**
+ * This notifies any interested functions that there
+ * is an Attention interrupt. The interested functions should take appropriate
+ * actions (such as reading the interrupt status register and dispatching any
+ * appropriate RMI4 interreupts).
+ */
+void attn_notify(struct rmi_sensor_driver *sensor)
+{
+ struct rmi_function_info *functionInfo;
+
+ /* check each function that has data sources and if the interrupt for
+ * that triggered then call that RMI4 functions report() function to
+ * gather data and report it to the input subsystem */
+ list_for_each_entry(functionInfo, &sensor->functions, link) {
+ if (functionInfo->function_device->rmi_funcs->attention)
+ functionInfo->function_device->rmi_funcs->attention(functionInfo);
+ }
+}
+
+/* This is the worker function - for now it simply has to call attn_notify. This work
+ * should be scheduled whenever an ATTN interrupt is asserted by the touch sensor.
+ * We then call attn_notify to dispatch notification of the ATTN interrupt to all
+ * interested functions. After all the attention handling functions
+ * have returned, it is presumed safe to re-enable the Attention interrupt.
+ */
+static void sensor_work_func(struct work_struct *work)
+{
+ struct rmi_sensor_driver *sensor = container_of(work,
+ struct rmi_sensor_driver, work);
+
+ attn_notify(sensor);
+
+ /* we only need to enable the irq if doing interrupts */
+ if (!rmi_polling_required(sensor))
+ enable_irq(sensor->rpd->irq);
+}
+
+/* This is the timer function for polling - it simply has to schedule work
+ * and restart the timer. */
+static enum hrtimer_restart sensor_poll_timer_func(struct hrtimer *timer)
+{
+ struct rmi_sensor_driver *sensor = container_of(timer,
+ struct rmi_sensor_driver, timer);
+
+ schedule_work(&sensor->work);
+ hrtimer_start(&sensor->timer, ktime_set(0, polltime), HRTIMER_MODE_REL);
+ return HRTIMER_NORESTART;
+}
+
+/* This is the probe function passed to the RMI4 subsystem that gives us a
+ * chance to recognize an RMI4 device. In this case, we're looking for
+ * Synaptics devices that have data sources - such as touch screens, buttons,
+ * etc.
+ *
+ * TODO: Well, it used to do this. I'm not sure it's required any more.
+ */
+static int probe(struct rmi_sensor_driver *sensor)
+{
+ struct rmi_phys_driver *rpd;
+
+ rpd = sensor->rpd;
+
+ if (!rpd) {
+ printk(KERN_ERR "%s: Invalid rmi physical driver - null ptr: %p\n", __func__, rpd);
+ return 0;
+ }
+
+ return 1;
+}
+
+static void config(struct rmi_sensor_driver *sensor)
+{
+ /* For each data source we had detected print info and set up interrupts
+ or polling. */
+ struct rmi_function_info *functionInfo;
+ struct rmi_phys_driver *rpd;
+
+ rpd = sensor->rpd; /* get ptr to rmi_physical_driver from app */
+
+ list_for_each_entry(functionInfo, &sensor->functions, link) {
+ /* Get and print some info about the data sources... */
+ struct rmi_functions *fn;
+ bool found = false;
+ /* check if function number matches - if so call that
+ config function */
+ fn = rmi_find_function(functionInfo->functionNum);
+ if (fn) {
+ found = true;
+
+ if (fn->config) {
+ fn->config(functionInfo);
+ } else {
+ /* the developer did not add in the
+ pointer to the config function into
+ rmi4_supported_data_src_functions */
+ printk(KERN_ERR
+ "%s: no config function for "
+ "function 0x%x\n",
+ __func__, functionInfo->functionNum);
+ break;
+ }
+ }
+
+ if (!found) {
+ /* if no support found for this RMI4 function
+ it means the developer did not add the
+ appropriate function pointer list into the
+ rmi4_supported_data_src_functions array and/or
+ did not bump up the number of supported RMI4
+ functions in rmi.h as required */
+ printk(KERN_ERR "%s: could not find support "
+ "for function 0x%x\n",
+ __func__, functionInfo->functionNum);
+ }
+ }
+
+ /* This will handle interrupts on the ATTN line (interrupt driven)
+ * or will be called every poll interval (when we're not interrupt
+ * driven).
+ */
+ INIT_WORK(&sensor->work, sensor_work_func);
+ sensor->workIsReady = true;
+
+ if (rmi_polling_required(sensor)) {
+ /* We're polling driven, so set up the polling timer
+ and timer function. */
+ printk(KERN_INFO "%s: Setting up polling.", __func__);
+ hrtimer_init(&sensor->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ sensor->timer.function = sensor_poll_timer_func;
+ hrtimer_start(&sensor->timer, ktime_set(1, 0), HRTIMER_MODE_REL);
+ }
+}
+
+/** Just a stub for now.
+ */
+static int rmi_sensor_suspend(struct device *dev, pm_message_t state)
+{
+ printk(KERN_INFO "%s: sensor suspend called.", __func__);
+ return 0;
+}
+
+/** Just a stub for now.
+ */
+static int rmi_sensor_resume(struct device *dev)
+{
+ printk(KERN_INFO "%s: sensor resume called.", __func__);
+ return 0;
+}
+
+/*
+ * This method is called, whenever a new sensor device is added for the rmi
+ * bus.
+ *
+ * It will scan the devices PDT to determine the supported functions
+ * and create a new function device for each of these. It will read
+ * the query, control, command and data regsiters for the function
+ * to be used for each newly created function device.
+ *
+ * The sensor device is then bound to every function it supports.
+ *
+ */
+int rmi_sensor_register_functions(struct rmi_sensor_driver *sensor)
+{
+ struct rmi_function_device *function;
+ unsigned int interruptRegisterCount;
+ struct rmi_phys_driver *rpd;
+ int i;
+ unsigned char interruptCount;
+ struct rmi_function_info *functionInfo;
+ struct rmi_function_descriptor rmi_fd;
+ struct rmi_functions *fn;
+ bool found;
+ int retval;
+
+ pr_debug("%s: Registering sensor functions\n", __func__);
+
+ retval = 0;
+
+ /* Scan device for functions that may be supported */
+ {
+ pr_debug("%s: Scanning sensor for Functions:\n", __func__);
+
+ interruptCount = 0;
+ rpd = sensor->rpd;
+
+ /* Read the Page Descriptor Table to determine what functions
+ are present */
+ printk(KERN_DEBUG "%s: Scanning page descriptors.", __func__);
+ for (i = PDT_START_SCAN_LOCATION;
+ i >= PDT_END_SCAN_LOCATION;
+ i -= PDT_ENTRY_SIZE) {
+ printk(KERN_DEBUG "%s: Reading page descriptor 0x%02x", __func__, i);
+ retval = rpd->read_multiple(rpd, i, (char *)&rmi_fd,
+ sizeof(rmi_fd));
+ if (!retval) {
+ functionInfo = NULL;
+
+ if (rmi_fd.functionNum != 0x00 && rmi_fd.functionNum != 0xff) {
+ printk(KERN_DEBUG "%s: F%02x - queries %02x commands %02x control %02x data %02x ints %02x", __func__, rmi_fd.functionNum, rmi_fd.queryBaseAddr, rmi_fd.commandBaseAddr, rmi_fd.controlBaseAddr, rmi_fd.dataBaseAddr, rmi_fd.interruptSrcCnt);
+
+ /* Print a helpful message for debugging. */
+ if ((rmi_fd.functionNum & 0xff) == 0x01)
+ printk(KERN_DEBUG "%s: Fn $01 Found - RMI Device Control\n", __func__);
+
+ /* determine if the function is supported and if so
+ then bind this function device to the sensor */
+ if (rmi_fd.interruptSrcCnt) {
+ functionInfo = kzalloc(sizeof(*functionInfo), GFP_KERNEL);
+ if (!functionInfo) {
+ printk(KERN_ERR "%s: could not allocate memory for function 0x%x\n",
+ __func__, rmi_fd.functionNum);
+ retval = -ENOMEM;
+ goto exit_fail;
+ }
+ functionInfo->sensor = sensor;
+ functionInfo->functionNum = (rmi_fd.functionNum & 0xff);
+ INIT_LIST_HEAD(&functionInfo->link);
+ /* Get the ptr to the detect function based on
+ the function number */
+ found = false;
+ printk(KERN_DEBUG "%s: Checking for RMI function F%02x.", __func__, rmi_fd.functionNum);
+ fn = rmi_find_function(rmi_fd.functionNum);
+ if (fn) {
+ found = true;
+ retval = fn->detect(functionInfo, &rmi_fd,
+ interruptCount);
+ if (retval)
+ printk(KERN_ERR "%s: Function detect for F%02x failed with %d.",
+ __func__, rmi_fd.functionNum, retval);
+
+ /* Create a function device and function driver for this Fn */
+ function = kzalloc(sizeof(*function), GFP_KERNEL);
+ if (!function) {
+ printk(KERN_ERR "%s: Error allocating memeory for rmi_function_device\n", __func__);
+ return -ENOMEM;
+ }
+
+ function->dev.parent = &sensor->sensor_device->dev;
+ function->dev.bus = sensor->sensor_device->dev.bus;
+ function->rmi_funcs = fn;
+ function->sensor = sensor;
+ function->rfi = functionInfo;
+ functionInfo->function_device = function;
+
+ /* Check if we have an interrupt mask of 0 and a non-NULL interrupt
+ handler function and print a debug message since we should never
+ have this.
+ */
+ if (functionInfo->interruptMask == 0 && fn->inthandler != NULL) {
+ printk(KERN_DEBUG "%s: Can't have a zero interrupt mask for function F%02x (which requires an interrupt handler).\n",
+ __func__, rmi_fd.functionNum);
+ }
+
+
+ /* Check if we have a non-zero interrupt mask and a NULL interrupt
+ handler function and print a debug message since we should never
+ have this.
+ */
+ if (functionInfo->interruptMask != 0 && fn->inthandler == NULL) {
+ printk(KERN_DEBUG "%s: Can't have a non-zero interrupt mask %d for function F%02x with a NULL inthandler fn.\n",
+ __func__, functionInfo->interruptMask, rmi_fd.functionNum);
+ }
+
+ /* Register the rmi function device */
+ retval = rmi_function_register_device(function, rmi_fd.functionNum);
+ if (retval) {
+ printk(KERN_ERR "%s: Failed rmi_function_register_device.\n",
+ __func__);
+ return retval;
+ }
+ }
+
+ if (!found) {
+ printk(KERN_ERR "%s: could not find support for function 0x%x\n",
+ __func__, rmi_fd.functionNum);
+ }
+ } else {
+ printk(KERN_INFO "%s: Found function F%02x - Ignored.\n", __func__, rmi_fd.functionNum & 0xff);
+ }
+
+ /* bump interrupt count for next iteration */
+ /* NOTE: The value 7 is reserved - for now, only bump up one for an interrupt count of 7 */
+ if ((rmi_fd.interruptSrcCnt & 0x7) == 0x7) {
+ interruptCount += 1;
+ } else {
+ interruptCount +=
+ (rmi_fd.interruptSrcCnt & 0x7);
+ }
+
+ /* link this function info to the RMI module infos list
+ of functions */
+ if (functionInfo == NULL) {
+ printk(KERN_DEBUG "%s: WTF? functionInfo is null here.", __func__);
+ } else {
+ printk(KERN_DEBUG "%s: Adding function F%02x with %d sources.\n",
+ __func__, functionInfo->functionNum, functionInfo->numSources);
+
+ mutex_lock(&rfi_mutex);
+ list_add_tail(&functionInfo->link,
+ &sensor->functions);
+ mutex_unlock(&rfi_mutex);
+ }
+
+ } else {
+ /* A zero or 0xff in the function number
+ signals the end of the PDT */
+ printk(KERN_DEBUG "%s: Found End of PDT\n",
+ __func__);
+ break;
+ }
+ } else {
+ /* failed to read next PDT entry - end PDT
+ scan - this may result in an incomplete set
+ of recognized functions - should probably
+ return an error but the driver may still be
+ viable for diagnostics and debugging so let's
+ let it continue. */
+ printk(KERN_ERR "%s: Read Error %d when reading next PDT entry - "
+ "ending PDT scan.\n",
+ __func__, retval);
+ break;
+ }
+ }
+ printk(KERN_DEBUG "%s: Done scanning.", __func__);
+
+ /* calculate the interrupt register count - used in the
+ ISR to read the correct number of interrupt registers */
+ interruptRegisterCount = (interruptCount + 7) / 8;
+ sensor->interruptRegisterCount = interruptRegisterCount; /* TODO: Is this needed by the sensor anymore? */
+ }
+
+ return 0;
+
+exit_fail:
+ return retval;
+}
+EXPORT_SYMBOL(rmi_sensor_register_functions);
+
+int rmi_sensor_register_device(struct rmi_sensor_device *dev, int index)
+{
+ int status;
+
+ printk(KERN_INFO "%s: Registering sensor device.\n", __func__);
+
+ /* make name - sensor00, sensor01, etc. */
+ dev_set_name(&dev->dev, "sensor%02d", index);
+ status = device_register(&dev->dev);
+
+ return status;
+}
+EXPORT_SYMBOL(rmi_sensor_register_device);
+
+static void rmi_sensor_unregister_device(struct rmi_sensor_device *rmisensordev)
+{
+ printk(KERN_INFO "%s: Unregistering sensor device.\n", __func__);
+
+ device_unregister(&rmisensordev->dev);
+}
+EXPORT_SYMBOL(rmi_sensor_unregister_device);
+
+int rmi_sensor_register_driver(struct rmi_sensor_driver *driver)
+{
+ static int index;
+ int ret;
+ char *drvrname;
+
+ driver->workIsReady = false;
+
+ printk(KERN_INFO "%s: Registering sensor driver.\n", __func__);
+ driver->dispatchIRQs = dispatchIRQs;
+ driver->attention = attention;
+ driver->config = config;
+ driver->probe = probe;
+
+ /* assign the bus type for this driver to be rmi bus */
+ driver->drv.bus = &rmi_bus_type;
+ driver->drv.suspend = rmi_sensor_suspend;
+ driver->drv.resume = rmi_sensor_resume;
+ /* Create a function device and function driver for this Fn */
+ drvrname = kzalloc(sizeof(sensorname) + 4, GFP_KERNEL);
+ if (!drvrname) {
+ printk(KERN_ERR "%s: Error allocating memeory for rmi_sensor_driver name.\n", __func__);
+ return -ENOMEM;
+ }
+ sprintf(drvrname, "sensor%02d", index++);
+
+ driver->drv.name = drvrname;
+ driver->module = driver->drv.owner;
+
+ /* register the sensor driver */
+ ret = driver_register(&driver->drv);
+ if (ret) {
+ printk(KERN_ERR "%s: Failed driver_register %d\n",
+ __func__, ret);
+ goto exit_fail;
+ }
+
+ /* register the functions on the sensor */
+ ret = rmi_sensor_register_functions(driver);
+ if (ret) {
+ printk(KERN_ERR "%s: Failed rmi_sensor_register_functions %d\n",
+ __func__, ret);
+ }
+
+ /* configure the sensor - enable interrupts for each function, init work, set polling timer or adjust report rate, etc. */
+ config(driver);
+
+ printk(KERN_INFO "%s: sensor driver registration completed.", __func__);
+
+exit_fail:
+ return ret;
+}
+EXPORT_SYMBOL(rmi_sensor_register_driver);
+
+static void rmi_sensor_unregister_driver(struct rmi_sensor_driver *driver)
+{
+ printk(KERN_INFO "%s: Unregistering sensor driver.\n", __func__);
+
+ /* Stop the polling timer if doing polling */
+ if (rmi_polling_required(driver))
+ hrtimer_cancel(&driver->timer);
+
+ flush_scheduled_work(); /* Make sure all scheduled work is stopped */
+
+ driver_unregister(&driver->drv);
+}
+EXPORT_SYMBOL(rmi_sensor_unregister_driver);
+
+
+static int __init rmi_sensor_init(void)
+{
+ printk(KERN_INFO "%s: RMI Sensor Init\n", __func__);
+ return 0;
+}
+
+static void __exit rmi_sensor_exit(void)
+{
+ printk(KERN_INFO "%s: RMI Sensor Driver Exit\n", __func__);
+ flush_scheduled_work(); /* Make sure all scheduled work is stopped */
+}
+
+
+module_init(rmi_sensor_init);
+module_exit(rmi_sensor_exit);
+
+MODULE_AUTHOR("Synaptics, Inc.");
+MODULE_DESCRIPTION("RMI4 Sensor Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/rmi_sensor.h b/drivers/input/touchscreen/rmi_sensor.h
new file mode 100644
index 0000000..967e78a
--- /dev/null
+++ b/drivers/input/touchscreen/rmi_sensor.h
@@ -0,0 +1,136 @@
+/**
+ *
+ * Synaptics Register Mapped Interface (RMI4) - RMI Sensor Module Header.
+ * Copyright (C) 2007 - 2011, Synaptics Incorporated
+ *
+ */
+/*
+ *
+ * This file is licensed under the GPL2 license.
+ *
+ *#############################################################################
+ * GPL
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ *#############################################################################
+ */
+
+#include <linux/device.h>
+
+#ifndef _RMI_SENSOR_H
+#define _RMI_SENSOR_H
+
+#include "rmi_platformdata.h"
+
+struct rmi_sensor_driver {
+ struct module *module;
+ struct device_driver drv;
+ struct rmi_sensor_device *sensor_device;
+
+ /* Attention Function
+ * This function is called by the low level isr in the physical
+ * driver. It merely schedules work to be done.
+ */
+ void (*attention)(struct rmi_phys_driver *physdrvr, int instance);
+ /* Probe Function
+ * This function is called to give the sensor driver layer an
+ * opportunity to claim an RMI device. The sensor layer cannot
+ * read RMI registers at this point since the rmi physical driver
+ * has not been bound to it yet. Defer that to the config
+ * function call which occurs immediately after a successful probe.
+ */
+ int (*probe)(struct rmi_sensor_driver *sensor);
+ /* Config Function
+ * This function is called after a successful probe. It gives the
+ * sensor driver an opportunity to query and/or configure an RMI
+ * device before data starts flowing.
+ */
+ void (*config)(struct rmi_sensor_driver *sensor);
+
+ /* Functions can call this in order to dispatch IRQs. */
+ void (*dispatchIRQs)(struct rmi_sensor_driver *sensor,
+ unsigned int irqStatus);
+
+ /* Register Functions
+ * This function is called in the rmi bus
+ * driver to have the sensor driver scan for any supported
+ * functions on the sensor and add devices for each one.
+ */
+ void (*rmi_sensor_register_functions)(struct rmi_sensor_driver *sensor);
+
+ unsigned int interruptRegisterCount;
+
+ bool polling_required;
+
+ /* pointer to the corresponding phys driver info for this sensor */
+ /* The phys driver has the pointers to read, write, etc. */
+ struct rmi_phys_driver *rpd;
+
+ struct hrtimer timer;
+ struct work_struct work;
+ bool workIsReady;
+
+ /* This list is for keeping around the list of sensors.
+ * Every time that a physical device is detected by the
+ * physical layer - be it i2c, spi, or some other - then
+ * we need to bind the physical layer to the device. When
+ * the Page Descriptor Table is scanned and when Function $01
+ * is found then a new sensor device is created. The corresponding
+ * rmi_phys_driver struct pointer needs to be bound to the new
+ * sensor since Function $01 will be used to control and get
+ * interrupt information about the particular data source that is
+ * doing the interrupt. The rmi_phys_driver contains the pointers
+ * to the particular read, write, read_multiple, write_multiple
+ * functions for this device. This rmi_phys_driver struct will
+ * have to be up-bound to any drivers upstream that need it.
+ */
+
+ /* Standard kernel linked list implementation.
+ * Documentation on how to use it can be found at
+ * http://isis.poly.edu/kulesh/stuff/src/klist/.
+ */
+ struct list_head sensor_drivers; /* link sensor drivers into list */
+
+ struct list_head functions; /* List of rmi_function_infos */
+ struct rmi_functiondata_list *perfunctiondata; /* Per function initialization data. */
+};
+
+/* macro to get the pointer to the device_driver struct from the sensor */
+#define to_rmi_sensor_driver(drv) container_of(drv, struct rmi_sensor_driver, drv);
+
+struct rmi_sensor_device {
+ struct rmi_sensor_driver *driver;
+ struct device dev;
+
+ /* Standard kernel linked list implementation.
+ * Documentation on how to use it can be found at
+ * http://isis.poly.edu/kulesh/stuff/src/klist/.
+ */
+ struct list_head sensors; /* link sensors into list */
+};
+
+int rmi_sensor_register_device(struct rmi_sensor_device *dev, int index);
+int rmi_sensor_register_driver(struct rmi_sensor_driver *driver);
+int rmi_sensor_register_functions(struct rmi_sensor_driver *sensor);
+bool rmi_polling_required(struct rmi_sensor_driver *sensor);
+
+static inline void *rmi_sensor_get_functiondata(struct rmi_sensor_driver *driver, unsigned char function_index)
+{
+ int i;
+ for (i = 0; i < driver->perfunctiondata->count; i++) {
+ if (driver->perfunctiondata->functiondata[i].function_index == function_index)
+ return driver->perfunctiondata->functiondata[i].data;
+ }
+ return NULL;
+}
+
+#endif
+
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists