linux-kernel - [PATCH] mfd: Continue with IRQ setup even if we don't have PMIC main IRQ

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Date:	Mon,  4 Apr 2011 11:59:57 +0900
From:	Mark Brown <broonie@...nsource.wolfsonmicro.com>
To:	Samuel Ortiz <sameo@...ux.intel.com>
Cc:	linux-kernel@...r.kernel.org, patches@...nsource.wolfsonmicro.com,
	Mark Brown <broonie@...nsource.wolfsonmicro.com>
Subject: [PATCH] mfd: Continue with IRQ setup even if we don't have PMIC main IRQ

The fact that we can't actually raise any interrupts doesn't stop us
setting up the IRQs we're exporting. While this isn't actually going
to do anything it allows us to proceed further through device setup
during board bringup and avoids issues with the MFD core not letting
us suppress the configuration of IRQ resources.

Signed-off-by: Mark Brown <broonie@...nsource.wolfsonmicro.com>
---
 drivers/mfd/wm831x-irq.c |   27 ++++++++++++++-------------
 1 files changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
index 23e66af..42b928e 100644
--- a/drivers/mfd/wm831x-irq.c
+++ b/drivers/mfd/wm831x-irq.c
@@ -515,12 +515,6 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq)
 				 0xffff);
 	}
 
-	if (!irq) {
-		dev_warn(wm831x->dev,
-			 "No interrupt specified - functionality limited\n");
-		return 0;
-	}
-
 	if (!pdata || !pdata->irq_base) {
 		dev_err(wm831x->dev,
 			"No interrupt base specified, no interrupts\n");
@@ -567,15 +561,22 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq)
 #endif
 	}
 
-	ret = request_threaded_irq(irq, NULL, wm831x_irq_thread,
-				   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
-				   "wm831x", wm831x);
-	if (ret != 0) {
-		dev_err(wm831x->dev, "Failed to request IRQ %d: %d\n",
-			irq, ret);
-		return ret;
+	if (irq) {
+		ret = request_threaded_irq(irq, NULL, wm831x_irq_thread,
+					   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					   "wm831x", wm831x);
+		if (ret != 0) {
+			dev_err(wm831x->dev, "Failed to request IRQ %d: %d\n",
+				irq, ret);
+			return ret;
+		}
+	} else {
+		dev_warn(wm831x->dev,
+			 "No interrupt specified - functionality limited\n");
 	}
 
+
+
 	/* Enable top level interrupts, we mask at secondary level */
 	wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0);
 
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/