| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 04 Apr 2011 11:10:42 +0200
From: Prchal Jiří <jiri.prchal@...ignal.cz>
To: Ryan Mallon <ryan@...ewatersys.com>,
linux-arm-kernel@...ts.infradead.org
CC: linux@...im.org.za, nicolas.ferre@...el.com, plagnioj@...osoft.co,
linux-kernel@...r.kernel.org
Subject: [PATCH] ARCH arm: adding new board: CDU
Hi,
this is separated PATCH adding new board CDU.
Depend on: [PATCH 1/2] ALSA: ASoc: TLV320AIC3X: ad SPI and clock on GPIO2 or BCLK
[PATCH] ALSA: ASoc: new functions snd_soc_7_8_*
[PATCH 2/2] ALSA: ASoc: putting together AT91SAM9260 and TLV320AIC3X
Kernel version: 2.6.38
Signed-off-by: Jiri Prchal <jiri.prchal@...ignal.cz>
Dne 24.3.2011 21:07, Ryan Mallon napsal(a):
> On 03/24/2011 11:43 PM, Prchal Jiří wrote:
>> Hi,
>> this patch is for example how to put together AT91SAM9260 and TLV320AIC3106 controlled via SPI.
>> It tooks me a lot of time to make it working, so I think it could be helpfull for other people.
>>
>> In original source "snd-soc-afeb9260.c" which I use as example is BIG ERROR:
>> In function "afeb9260_soc_init" is missing call of "atmel_ssc_set_audio(0);". It cause bug "PROBLEM: Asoc driver in
>> 2.6.37.3 for AT91SAM9260 / TLV320AIC3X is broken" which I post some time ago.
>
> Hi Jiri,
>
> This patch is actually doing two things: adding board support for a new
> at91sam9260 device and adding the audio glue for the new board. It
> should be split into two patches. Quick review below.
>
> ~Ryan
>
>>
>> Depend on: [PATCH 1/2] ALSA: ASoc: TLV320AIC3X: ad SPI and clock on GPIO2 or BCLK
>> Kernel version: 2.6.38
>> Signed-off-by: Jiri Prchal <jiri.prchal@...ignal.cz>
>> ---
>>
>> diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/arch/arm/mach-at91/board-cdu.c
>> /home/prchal/arm/fw-cdu/linux/linux-2.6.38/arch/arm/mach-at91/board-cdu.c
>> --- linux-2.6.38-vanilla/arch/arm/mach-at91/board-cdu.c 1970-01-01 01:00:00.000000000 +0100
>> +++ /home/prchal/arm/fw-cdu/linux/linux-2.6.38/arch/arm/mach-at91/board-cdu.c 2011-03-24 09:15:23.852370981 +0100
>> @@ -0,0 +1,345 @@
>> +/*
>> + * linux/arch/arm/mach-at91/board-cdu.c
>> + *
>> + * Copyright (C) 2005 SAN People
>> + * Copyright (C) 2006 Atmel
>> + * Copyright (C) 2011 AKsignal Brno
>> + * jiri.prchal@...ignal.cz
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
>> + */
>> +
>> +#include <linux/types.h>
>> +#include <linux/init.h>
>> +#include <linux/mm.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/spi/spi.h>
>> +#include <linux/clk.h>
>> +#include <linux/spi/mcp23s08.h>
>> +#include <linux/dma-mapping.h>
>> +
>> +#include <mach/hardware.h>
>> +#include <asm/setup.h>
>> +#include <asm/mach-types.h>
>> +#include <asm/irq.h>
>> +
>> +#include <asm/mach/arch.h>
>> +#include <asm/mach/map.h>
>> +#include <asm/mach/irq.h>
>> +
>> +#include <mach/board.h>
>> +#include <mach/gpio.h>
>> +#include <mach/at91sam9_smc.h>
>> +
>> +#include "sam9_smc.h"
>> +#include "generic.h"
>> +
>> +static void __init cdu_map_io(void)
>> +{
>> + /* Initialize processor: 6 MHz crystal */
>> + at91sam9260_initialize(6000000);
>> +
>> + /* DBGU on ttyS0. (Rx & Tx only) */
>> + at91_register_uart(0, 0, 0);
>> +
>> + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
>> + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
>> + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
>> + | ATMEL_UART_RI);
>> +
>> + /* USART1 on ttyS2. (Rx, Tx, RTS) */
>> + at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_RTS);
>> +
>> + /* USART2 on ttyS3. (Rx, Tx, RTS) */
>> + at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_RTS);
>> +
>> + /* USART3 on ttyS4. (Rx, Tx, RTS) */
>> + at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS);
>> +
>> + /* USART4 on ttyS5. (Tx) */
>> + /* EBUS - transmit audio, no rx */
>> + /*at91_register_uart(AT91SAM9260_ID_US4, 5, 0);*/
>> +
>> + /* set serial console to ttyS0 (ie, DBGU) */
>> + at91_set_serial_console(0);
>> +}
>> +
>> +static void __init cdu_init_irq(void)
>> +{
>> + at91sam9260_init_interrupts(NULL);
>> +}
>> +
>> +/*
>> + * USB Host port
>> + */
>> +static struct at91_usbh_data __initdata cdu_usbh_data = {
>> + .ports = 2,
>> +};
>> +
>> +/*
>> + * USB Device port
>> + */
>> +static struct at91_udc_data __initdata cdu_udc_data = {
>> + .vbus_pin = AT91_PIN_PC15,
>> + .pullup_pin = 0, /* pull-up driven by UDC */
>> +};
>> +
>> +/*
>> + * SPI devices.
>> + */
>> +#define MCP23S08_GPIO_BASE 128
>> +
>> +static const struct mcp23s08_platform_data mcp23s08_gpio_info = {
>> + .chip[0].is_present = true,
>> + .chip[0].pullups = 0,
>> + .base = MCP23S08_GPIO_BASE,
>> +};
>> +
>> +static struct spi_board_info cdu_spi_devices[] = {
>> + { /* ADC LTC2488 */
>> + .modalias = "spidev",
>> + .chip_select = 0,
>> + .max_speed_hz = 1 * 1000 * 1000,
>> + .bus_num = 1,
>> + },
>> + { /* GPIO expander MCP23S08 */
>> + .modalias = "mcp23s08",
>> + .chip_select = 1,
>> + .max_speed_hz = 1000000,
>> + .bus_num = 1,
>> + .platform_data = &mcp23s08_gpio_info,
>> + .mode = SPI_MODE_3,
>> + },
>> + { /* non volatile memory (F-RAM) FM25VN10 */
>> + .modalias = "spidev",
>> + .chip_select = 2,
>> + .max_speed_hz = 1 * 1000 * 1000,
>> + .bus_num = 1,
>> + },
>> + { /* audiocodec TLV320AIC3106 */
>> + .modalias = "tlv320aic3x-codec",
>> + .chip_select = 3,
>> + .max_speed_hz = 1000000,
>> + .bus_num = 1,
>> + .mode = SPI_MODE_1,
>> + },
>> +};
>> +
>> +/*
>> + * MACB Ethernet device
>> + */
>> +static struct at91_eth_data __initdata cdu_macb_data = {
>> + .phy_irq_pin = 0, //nc,
>
> Don't use // comments. This line can just be deleted since it default to
> zero.
I'd like to keep this lines to explicitly see not connected pins.
>
>> + .is_rmii = 1,
>> +};
>> +
>> +/*
>> + * NAND flash
>> + */
>> +static struct mtd_partition __initdata cdu_nand_partition[] = {
>> + {
>> + .name = "bootstrap",
>> + .offset = 0,
>> + .size = 0x40000,
>
> Tabbing is messed here.
>
>> + },
>> + {
>> + .name = "uboot",
>> + .offset = 0x40000,
>
> You can use MTDPART_OFS_NXTBLK for the offset to align this partition
> immediately after the previous one.
>
>> + .size = (0xc0000 - 0x40000),
>
> What's with the odd sizes? You should use the sizes from asm/sizes.h.
Used sizes and offsets.
>
>> + },
>> + {
>> + .name = "ubootenv",
>> + .offset = 0xc0000,
>> + .size = (0x100000 - 0xc0000),
>> + },
>> + {
>> + .name = "kernel",
>> + .offset = 0x100000,
>> + .size = (0x400000 - 0x100000),
>> + },
>> + {
>> + .name = "rootfs",
>> + .offset = 0x400000,
>> + .size = (0x8000000 - 0x400000),
>> + },
>> +};
>> +
>> +static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
>> +{
>> + *num_partitions = ARRAY_SIZE(cdu_nand_partition);
>> + return cdu_nand_partition;
>> +}
>> +
>> +static struct atmel_nand_data __initdata cdu_nand_data = {
>> + .ale = 21,
>> + .cle = 22,
>> +// .det_pin = ... not connected
>
> Delete this line.
>
>> + .rdy_pin = AT91_PIN_PC13,
>> + .enable_pin = AT91_PIN_PC14,
>> + .partition_info = nand_partitions,
>> + .bus_width_16 = 0,
>> +};
>> +
>> +static struct sam9_smc_config __initdata cdu_nand_smc_config = {
>> + .ncs_read_setup = 0,
>> + .nrd_setup = 1,
>> + .ncs_write_setup = 0,
>> + .nwe_setup = 1,
>> +
>> + .ncs_read_pulse = 3,
>> + .nrd_pulse = 3,
>> + .ncs_write_pulse = 3,
>> + .nwe_pulse = 3,
>> +
>> + .read_cycle = 5,
>> + .write_cycle = 5,
>> +
>> + .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
>> + .tdf_cycles = 2,
>> +};
>> +
>> +static void __init cdu_add_device_nand(void)
>> +{
>> + /* setup bus-width (8 or 16) */
>> + if (cdu_nand_data.bus_width_16)
>> + cdu_nand_smc_config.mode |= AT91_SMC_DBW_16;
>> + else
>> + cdu_nand_smc_config.mode |= AT91_SMC_DBW_8;
>
> bus_width_16 is explicitly set to zero above, so this logic should not
> be needed.
>
Removed.
>> + /* configure chip-select 3 (NAND) */
>> + sam9_smc_configure(3, &cdu_nand_smc_config);
>> +
>> + at91_add_device_nand(&cdu_nand_data);
>> +}
>> +
>> +/*
>> +* MCI (SD/MMC)
>> +*/
>> +static struct at91_mmc_data __initdata ek_mmc_data = {
>> + .slot_b = 0,
>> + .wire4 = 1,
>> + // .det_pin = ... not connected
>> + // .wp_pin = ... not connected
>> + // .vcc_pin = ... not connected
>
> Delete these lines.
>
>> +};
>> +
>> +/*
>> + * LEDs
>> + */
>> +static struct gpio_led cdu_leds[] = {
>> + {
>> + .name = "red",
>> + .gpio = AT91_PIN_PC10,
>> + .default_trigger = "timer",
>> + },
>> + {
>> + .name = "green",
>> + .gpio = AT91_PIN_PA5,
>> + .default_trigger = "heartbeat",
>> + },
>> + {
>> + .name = "yellow",
>> + .gpio = AT91_PIN_PB20,
>> + .active_low = 1,
>> + .default_trigger = "mmc0",
>> + },
>> + {
>> + .name = "blue",
>> + .gpio = AT91_PIN_PB21,
>> + .active_low = 1,
>> + .default_trigger = "nand-disk",
>> + },
>> +};
>> +
>> +/*
>> + * GPIOs
>> + */
>> +static struct gpio gpios[] = {
>> + { AT91_PIN_PA0, GPIOF_OUT_INIT_LOW, "ebus_dir"},
>> + { AT91_PIN_PA1, GPIOF_OUT_INIT_LOW, "time_dir"},
>> + { AT91_PIN_PB12, GPIOF_OUT_INIT_LOW, "gsm_rst"},
>> + { AT91_PIN_PB13, GPIOF_OUT_INIT_LOW, "gsm_on"},
>> + { AT91_PIN_PC2, GPIOF_IN, "por"},
>> + { AT91_PIN_PC7, GPIOF_OUT_INIT_HIGH, "spk_shdn"},
>> +
>> + { AT91_PIN_PC0, GPIOF_IN, "in13"},
>> + { AT91_PIN_PC1, GPIOF_IN, "in14"},
>> + { AT91_PIN_PA22, GPIOF_IN, "in17"},
>> + { AT91_PIN_PA23, GPIOF_IN, "in18"},
>> + { AT91_PIN_PA24, GPIOF_IN, "in19"},
>> + { AT91_PIN_PA25, GPIOF_IN, "in20"},
>> +
>> + { AT91_PIN_PA26, GPIOF_OUT_INIT_LOW, "out15"},
>> + { AT91_PIN_PA27, GPIOF_OUT_INIT_LOW, "out16"},
>> + { AT91_PIN_PA28, GPIOF_OUT_INIT_LOW, "out17"},
>> + { AT91_PIN_PA29, GPIOF_OUT_INIT_LOW, "out18"},
>> + { AT91_PIN_PA30, GPIOF_OUT_INIT_LOW, "out19"},
>> + { AT91_PIN_PB29, GPIOF_OUT_INIT_LOW, "out20"},
>> +
>> + { MCP23S08_GPIO_BASE + 0, GPIOF_IN, "busadrp"},
>> + { MCP23S08_GPIO_BASE + 2, GPIOF_IN, "busadr5"},
>> + { MCP23S08_GPIO_BASE + 3, GPIOF_IN, "busadr4"},
>> + { MCP23S08_GPIO_BASE + 4, GPIOF_IN, "busadr3"},
>> + { MCP23S08_GPIO_BASE + 5, GPIOF_IN, "busadr2"},
>> + { MCP23S08_GPIO_BASE + 6, GPIOF_IN, "busadr1"},
>> + { MCP23S08_GPIO_BASE + 7, GPIOF_IN, "busadr0"},
>> +};
>> +
>> +static void __init cdu_add_gpio (void)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < ARRAY_SIZE (gpios); i++) {
>> + gpio_request_one (gpios[i].gpio, gpios[i].flags, gpios[i].label);
>> + }
>
> Nitpick, don't need braces on the for loop here. Also, remove the spaces
> between cdu_add_gpiop, ARRAY_SIZE, and gpio_request_one and their
> opening parenthesis.
>
There are two lines now.
>> +}
>> +
>> +/*
>> + * init
>> + */
>> +static void __init cdu_board_init(void)
>> +{
>> + /* Serial */
>> + at91_add_device_serial();
>> + /* USB Host */
>> + at91_add_device_usbh(&cdu_usbh_data);
>> + /* USB Device */
>> + at91_add_device_udc(&cdu_udc_data);
>> + /* SPI */
>> + at91_add_device_spi(cdu_spi_devices, ARRAY_SIZE(cdu_spi_devices));
>> + /* NAND */
>> + cdu_add_device_nand();
>> + /* Ethernet */
>> + at91_add_device_eth(&cdu_macb_data);
>> + /* MMC */
>> + at91_add_device_mmc(0, &ek_mmc_data);
>> + /* SSC */
>> + at91_add_device_ssc(AT91SAM9260_ID_SSC, (ATMEL_SSC_TF | ATMEL_SSC_TK | ATMEL_SSC_TD | ATMEL_SSC_RD));
>> + /* LEDs */
>> + at91_gpio_leds(cdu_leds, ARRAY_SIZE(cdu_leds));
>> + // GPIO
>> + cdu_add_gpio ();
>
> I might be a bit alone on this, but I find this cut and paste comment
> style for the at91 device initialisation awful. The function names are
> very self explanatory and the comments only serve to make the init code
> more difficult to read. Also, remove the // comment.
>
Removed.
>> +}
>> +
>> +MACHINE_START(AT91SAM9260EK, "CDU")
>> + /* Maintainer: Atmel */
>
> Nice of you to assign maintainership of your board to Atmel :-). You
> should possibly add a MAINTAINERS entry for this board.
New maitainer.
>
>> + .boot_params = AT91_SDRAM_BASE + 0x100,
>> + .timer = &at91sam926x_timer,
>> + .map_io = cdu_map_io,
>> + .init_irq = cdu_init_irq,
>> + .init_machine = cdu_board_init,
>> +MACHINE_END
>> diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/arch/arm/mach-at91/Kconfig
>> /home/prchal/arm/fw-cdu/linux/linux-2.6.38/arch/arm/mach-at91/Kconfig
>> --- linux-2.6.38-vanilla/arch/arm/mach-at91/Kconfig 2011-03-15 02:20:32.000000000 +0100
>> +++ /home/prchal/arm/fw-cdu/linux/linux-2.6.38/arch/arm/mach-at91/Kconfig 2011-03-16 09:19:40.000000000 +0100
>> @@ -213,6 +213,12 @@ config MACH_AT91SAM9260EK
>> Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
>> <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
>>
>> +config MACH_CDU
>> + bool "CDU AKsignal board"
>> + help
>> + Select this if you are using AKsignal CDU board
>> + <http://www.aksignal.cz>
>> +
>> config MACH_CAM60
>> bool "KwikByte KB9260 (CAM60) board"
>> help
>> diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/arch/arm/mach-at91/Makefile
>> /home/prchal/arm/fw-cdu/linux/linux-2.6.38/arch/arm/mach-at91/Makefile
>> --- linux-2.6.38-vanilla/arch/arm/mach-at91/Makefile 2011-03-15 02:20:32.000000000 +0100
>> +++ /home/prchal/arm/fw-cdu/linux/linux-2.6.38/arch/arm/mach-at91/Makefile 2011-03-16 09:19:40.000000000 +0100
>> @@ -40,6 +40,7 @@ obj-$(CONFIG_MACH_ECO920) += board-eco92
>>
>> # AT91SAM9260 board-specific support
>> obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
>> +obj-$(CONFIG_MACH_CDU) += board-cdu.o
>> obj-$(CONFIG_MACH_CAM60) += board-cam60.o
>> obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
>> obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o
>
> The first patch, adding just the support for the cdu board should end here.
>
diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/arch/arm/mach-at91/board-cdu.c
linux-2.6.38-patch/arch/arm/mach-at91/board-cdu.c
--- linux-2.6.38-vanilla/arch/arm/mach-at91/board-cdu.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.38-patch/arch/arm/mach-at91/board-cdu.c 2011-03-28 15:52:03.413048601 +0200
@@ -0,0 +1,332 @@
+/*
+ * linux/arch/arm/mach-at91/board-cdu.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2006 Atmel
+ * Copyright (C) 2011 AKsignal Brno
+ * jiri.prchal@...ignal.cz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/clk.h>
+#include <linux/spi/mcp23s08.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+static void __init cdu_map_io(void)
+{
+ /* Initialize processor: 6 MHz crystal */
+ at91sam9260_initialize(6000000);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx, Tx, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_RTS);
+
+ /* USART3 on ttyS4. (Rx, Tx, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS);
+
+ /* USART4 on ttyS5. (Tx) */
+ /* EBUS - transmit audio, no rx */
+ /*at91_register_uart(AT91SAM9260_ID_US4, 5, 0);*/
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init cdu_init_irq(void)
+{
+ at91sam9260_init_interrupts(NULL);
+}
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata cdu_usbh_data = {
+ .ports = 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata cdu_udc_data = {
+ .vbus_pin = AT91_PIN_PC15,
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+/*
+ * SPI devices.
+ */
+#define MCP23S08_GPIO_BASE 128
+
+static const struct mcp23s08_platform_data mcp23s08_gpio_info = {
+ .chip[0].is_present = true,
+ .chip[0].pullups = 0,
+ .base = MCP23S08_GPIO_BASE,
+};
+
+static struct spi_board_info cdu_spi_devices[] = {
+ { /* ADC LTC2488 */
+ .modalias = "spidev",
+ .chip_select = 0,
+ .max_speed_hz = 1 * 1000 * 1000,
+ .bus_num = 1,
+ },
+ { /* GPIO expander MCP23S08 */
+ .modalias = "mcp23s08",
+ .chip_select = 1,
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .platform_data = &mcp23s08_gpio_info,
+ .mode = SPI_MODE_3,
+ },
+ { /* non volatile memory (F-RAM) FM25VN10 */
+ .modalias = "spidev",
+ .chip_select = 2,
+ .max_speed_hz = 1 * 1000 * 1000,
+ .bus_num = 1,
+ },
+ { /* audiocodec TLV320AIC3106 */
+ .modalias = "tlv320aic3x-codec",
+ .chip_select = 3,
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .mode = SPI_MODE_1,
+ },
+};
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata cdu_macb_data = {
+ /*.phy_irq_pin = ... not connected */
+ .is_rmii = 1,
+};
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata cdu_nand_partition[] = {
+ {
+ .name = "bootstrap",
+ .offset = 0,
+ .size = SZ_256K,
+ },
+ {
+ .name = "uboot",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_512K,
+ },
+ {
+ .name = "ubootenv",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ },
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(cdu_nand_partition);
+ return cdu_nand_partition;
+}
+
+static struct atmel_nand_data __initdata cdu_nand_data = {
+ .ale = 21,
+ .cle = 22,
+ /*.det_pin = ... not connected */
+ .rdy_pin = AT91_PIN_PC13,
+ .enable_pin = AT91_PIN_PC14,
+ .partition_info = nand_partitions,
+ .bus_width_16 = 0,
+};
+
+static struct sam9_smc_config __initdata cdu_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 2,
+};
+
+static void __init cdu_add_device_nand(void)
+{
+ /* setup bus-width 8 */
+ cdu_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &cdu_nand_smc_config);
+
+ at91_add_device_nand(&cdu_nand_data);
+}
+
+/*
+* MCI (SD/MMC)
+*/
+static struct at91_mmc_data __initdata ek_mmc_data = {
+ .slot_b = 0,
+ .wire4 = 1,
+ /*.det_pin = ... not connected */
+ /*.wp_pin = ... not connected */
+ /*.vcc_pin = ... not connected */
+};
+
+/*
+ * LEDs
+ */
+static struct gpio_led cdu_leds[] = {
+ {
+ .name = "red",
+ .gpio = AT91_PIN_PC10,
+ .default_trigger = "timer",
+ },
+ {
+ .name = "green",
+ .gpio = AT91_PIN_PA5,
+ .default_trigger = "heartbeat",
+ },
+ {
+ .name = "yellow",
+ .gpio = AT91_PIN_PB20,
+ .active_low = 1,
+ .default_trigger = "mmc0",
+ },
+ {
+ .name = "blue",
+ .gpio = AT91_PIN_PB21,
+ .active_low = 1,
+ .default_trigger = "nand-disk",
+ },
+};
+
+/*
+ * GPIOs
+ */
+static struct gpio gpios[] = {
+ { AT91_PIN_PA0, GPIOF_OUT_INIT_LOW, "ebus_dir"},
+ { AT91_PIN_PA1, GPIOF_OUT_INIT_LOW, "time_dir"},
+ { AT91_PIN_PB12, GPIOF_OUT_INIT_LOW, "gsm_rst"},
+ { AT91_PIN_PB13, GPIOF_OUT_INIT_LOW, "gsm_on"},
+ { AT91_PIN_PC2, GPIOF_IN, "por"},
+ { AT91_PIN_PC7, GPIOF_OUT_INIT_HIGH, "spk_shdn"},
+
+ { AT91_PIN_PC0, GPIOF_IN, "in13"},
+ { AT91_PIN_PC1, GPIOF_IN, "in14"},
+ { AT91_PIN_PA22, GPIOF_IN, "in17"},
+ { AT91_PIN_PA23, GPIOF_IN, "in18"},
+ { AT91_PIN_PA24, GPIOF_IN, "in19"},
+ { AT91_PIN_PA25, GPIOF_IN, "in20"},
+
+ { AT91_PIN_PA26, GPIOF_OUT_INIT_LOW, "out15"},
+ { AT91_PIN_PA27, GPIOF_OUT_INIT_LOW, "out16"},
+ { AT91_PIN_PA28, GPIOF_OUT_INIT_LOW, "out17"},
+ { AT91_PIN_PA29, GPIOF_OUT_INIT_LOW, "out18"},
+ { AT91_PIN_PA30, GPIOF_OUT_INIT_LOW, "out19"},
+ { AT91_PIN_PB29, GPIOF_OUT_INIT_LOW, "out20"},
+
+ { MCP23S08_GPIO_BASE + 0, GPIOF_IN, "busadrp"},
+ { MCP23S08_GPIO_BASE + 2, GPIOF_IN, "busadr5"},
+ { MCP23S08_GPIO_BASE + 3, GPIOF_IN, "busadr4"},
+ { MCP23S08_GPIO_BASE + 4, GPIOF_IN, "busadr3"},
+ { MCP23S08_GPIO_BASE + 5, GPIOF_IN, "busadr2"},
+ { MCP23S08_GPIO_BASE + 6, GPIOF_IN, "busadr1"},
+ { MCP23S08_GPIO_BASE + 7, GPIOF_IN, "busadr0"},
+};
+
+static void __init cdu_add_gpio(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+ gpio_request_one(gpios[i].gpio, gpios[i].flags, gpios[i].label);
+ gpio_export_name(gpios[i].gpio, 0, gpios[i].label);
+ }
+}
+
+/*
+ * init
+ */
+static void __init cdu_board_init(void)
+{
+ at91_add_device_serial();
+ at91_add_device_usbh(&cdu_usbh_data);
+ at91_add_device_udc(&cdu_udc_data);
+ at91_add_device_spi(cdu_spi_devices, ARRAY_SIZE(cdu_spi_devices));
+ cdu_add_device_nand();
+ at91_add_device_eth(&cdu_macb_data);
+ at91_add_device_mmc(0, &ek_mmc_data);
+ at91_add_device_ssc(AT91SAM9260_ID_SSC, (ATMEL_SSC_TF | ATMEL_SSC_TK | ATMEL_SSC_TD | ATMEL_SSC_RD));
+ at91_gpio_leds(cdu_leds, ARRAY_SIZE(cdu_leds));
+ cdu_add_gpio ();
+}
+
+MACHINE_START(AT91SAM9260EK, "CDU")
+ /* Maintainer: AKsignal Brno */
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = cdu_map_io,
+ .init_irq = cdu_init_irq,
+ .init_machine = cdu_board_init,
+MACHINE_END
diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/arch/arm/mach-at91/Kconfig
linux-2.6.38-patch/arch/arm/mach-at91/Kconfig
--- linux-2.6.38-vanilla/arch/arm/mach-at91/Kconfig 2011-03-15 02:20:32.000000000 +0100
+++ linux-2.6.38-patch/arch/arm/mach-at91/Kconfig 2011-03-16 09:19:40.000000000 +0100
@@ -213,6 +213,12 @@ config MACH_AT91SAM9260EK
Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+config MACH_CDU
+ bool "CDU AKsignal board"
+ help
+ Select this if you are using AKsignal CDU board
+ <http://www.aksignal.cz>
+
config MACH_CAM60
bool "KwikByte KB9260 (CAM60) board"
help
diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/arch/arm/mach-at91/Makefile
linux-2.6.38-patch/arch/arm/mach-at91/Makefile
--- linux-2.6.38-vanilla/arch/arm/mach-at91/Makefile 2011-03-15 02:20:32.000000000 +0100
+++ linux-2.6.38-patch/arch/arm/mach-at91/Makefile 2011-03-16 09:19:40.000000000 +0100
@@ -40,6 +40,7 @@ obj-$(CONFIG_MACH_ECO920) += board-eco92
# AT91SAM9260 board-specific support
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
+obj-$(CONFIG_MACH_CDU) += board-cdu.o
obj-$(CONFIG_MACH_CAM60) += board-cam60.o
obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o
diff -uprN -X linux-2.6.38-vanilla/Documentation/dontdiff linux-2.6.38-vanilla/MAINTAINERS linux-2.6.38-patch/MAINTAINERS
--- linux-2.6.38-vanilla/MAINTAINERS 2011-03-15 02:20:32.000000000 +0100
+++ linux-2.6.38-patch/MAINTAINERS 2011-03-25 08:37:56.693049978 +0100
@@ -1640,6 +1640,13 @@ F: include/linux/can/error.h
F: include/linux/can/netlink.h
F: include/linux/can/platform/
+CDU BOARD
+M: Jiri Prchal <jiri.prchal@...ignal.cz>
+L: linux-arch@...r.kernel.org
+W: http://www.linux4sam.org
+S: Supported
+F: arch/arm/mach-at91/
+
CELL BROADBAND ENGINE ARCHITECTURE
M: Arnd Bergmann <arnd@...db.de>
L: linuxppc-dev@...ts.ozlabs.org
Soubory linux-2.6.38-vanilla/scripts/recordmcount a linux-2.6.38-patch/scripts/recordmcount jsou rĹŻznĂŠ
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists