Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.39-rc2+ (root@chywoon) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #193 SMP PREEMPT Tue Apr 12 17:12:25 BST 2011 Command line: ro root=/dev/mapper/VolGroup-lv_root rhgb console=ttyS0,115200n8 console=tty0 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us mem=4G BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 00000000cf669000 (usable) BIOS-e820: 00000000cf669000 - 00000000cf67f000 (reserved) BIOS-e820: 00000000cf67f000 - 00000000cf6be000 (ACPI data) BIOS-e820: 00000000cf6be000 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000330000000 (usable) NX (Execute Disable) protection: active user-defined physical RAM map: user: 0000000000000000 - 00000000000a0000 (usable) user: 0000000000100000 - 00000000cf669000 (usable) user: 00000000cf669000 - 00000000cf67f000 (reserved) user: 00000000cf67f000 - 00000000cf6be000 (ACPI data) user: 00000000cf6be000 - 00000000d0000000 (reserved) user: 00000000e0000000 - 00000000f0000000 (reserved) user: 00000000fe000000 - 0000000100000000 (reserved) DMI 2.6 present. No AGP bridge found last_pfn = 0xcf669 max_arch_pfn = 0x400000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 found SMP MP-table at [ffff8800000fe710] fe710 init_memory_mapping: 0000000000000000-00000000cf669000 RAMDISK: 3768b000 - 37ff0000 ACPI: RSDP 00000000000f0a90 00024 (v02 DELL ) ACPI: XSDT 00000000000f0b94 0009C (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: FACP 00000000cf6a3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001) ACPI: DSDT 00000000cf67f000 03D5A (v01 DELL PE_SC3 00000001 INTL 20050624) ACPI: FACS 00000000cf6a6000 00040 ACPI: APIC 00000000cf6a3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: SPCR 00000000cf6a35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: HPET 00000000cf6a362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: DMAR 00000000cf6a3668 001B0 (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: MCFG 00000000cf6a38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: WD__ 00000000cf6a3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: SLIC 00000000cf6a3a3c 00024 (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: ERST 00000000cf682edc 00270 (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: HEST 00000000cf68314c 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: BERT 00000000cf682d5c 00030 (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: EINJ 00000000cf682d8c 00150 (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: SRAT 00000000cf6a3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001) ACPI: TCPA 00000000cf6a3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001) ACPI: SSDT 00000000cf6a7000 01DEC (v01 INTEL PPM RCM 80000001 INTL 20061109) SRAT: PXM 1 -> APIC 0x10 -> Node 0 SRAT: PXM 2 -> APIC 0x00 -> Node 1 SRAT: PXM 1 -> APIC 0x12 -> Node 0 SRAT: PXM 2 -> APIC 0x02 -> Node 1 SRAT: PXM 1 -> APIC 0x14 -> Node 0 SRAT: PXM 2 -> APIC 0x04 -> Node 1 SRAT: PXM 1 -> APIC 0x16 -> Node 0 SRAT: PXM 2 -> APIC 0x06 -> Node 1 SRAT: Node 1 PXM 2 0-d0000000 SRAT: Node 1 PXM 2 100000000-1b0000000 SRAT: Node 0 PXM 1 1b0000000-330000000 NUMA: Node 1 [0,cf669000) + [100000000,1b0000000) -> [0,cf669000) NUMA: nodes only cover 0MB of your 3317MB e820 RAM. Not used. No NUMA configuration found Faking a node at 0000000000000000-00000000cf669000 Initmem setup node 0 0000000000000000-00000000cf669000 NODE_DATA [00000000cf65e000 - 00000000cf662fff] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x000000a0 0: 0x00000100 -> 0x000cf669 ACPI: PM-Timer IO Port: 0x808 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled) ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32]) IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a301 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 475 pages/cpu @ffff8800cb000000 s1913872 r8192 d23536 u2097152 Built 1 zonelists in Node order, mobility grouping on. Total pages: 837782 Policy zone: DMA32 Kernel command line: ro root=/dev/mapper/VolGroup-lv_root rhgb console=ttyS0,115200n8 console=tty0 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us mem=4G PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Memory: 3300120k/3398052k available (6695k kernel code, 448k absent, 97484k reserved, 6535k data, 2572k init) Preemptable hierarchical RCU implementation. RCU debugfs-based tracing is enabled. NR_IRQS:512 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 6367 kB per task-struct memory footprint: 2688 bytes allocated 27262976 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Fast TSC calibration using PIT Detected 1994.649 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.29 BogoMIPS (lpj=1994649) pid_max: default: 32768 minimum: 301 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys perf_event CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 mce: CPU supports 9 MCE banks CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. Freeing SMP alternatives: 24k freed ACPI: Core revision 20110316 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05 Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f lockdep: fixing up alternatives. Booting Node 0, Processors #1 lockdep: fixing up alternatives. #2 lockdep: fixing up alternatives. #3 lockdep: fixing up alternatives. #4 lockdep: fixing up alternatives. #5 lockdep: fixing up alternatives. #6 lockdep: fixing up alternatives. #7 Ok. Brought up 8 CPUs Total of 8 processors activated (31914.94 BogoMIPS). kworker/u:0 used greatest stack depth: 4808 bytes left print_constraints: dummy: NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered dca service started, version 1.12.1 PCI: Using configuration type 1 for base access bio: create slab at 0 [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfdffffff] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f) pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:03.0: PCI bridge to [bus 02-02] pci 0000:00:04.0: PCI bridge to [bus 03-03] pci 0000:00:05.0: PCI bridge to [bus 04-04] pci 0000:00:06.0: PCI bridge to [bus 05-05] pci 0000:00:07.0: PCI bridge to [bus 06-06] pci 0000:00:09.0: PCI bridge to [bus 07-07] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode) ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15) ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15) ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15) ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15) vgaarb: device added: PCI:0000:08:03.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing HPET: 4 timers in total, 0 timers will be used for per-cpu timer Switching to clocksource hpet Switched to NOHz mode on CPU #0 Switched to NOHz mode on CPU #2 Switched to NOHz mode on CPU #4 Switched to NOHz mode on CPU #6 Switched to NOHz mode on CPU #5 Switched to NOHz mode on CPU #1 Switched to NOHz mode on CPU #3 Switched to NOHz mode on CPU #7 pnp: PnP ACPI init ACPI: bus type pnp registered system 00:07: [io 0x0800-0x087f] has been reserved system 00:07: [io 0x0880-0x08ff] has been reserved system 00:07: [io 0x0900-0x091f] has been reserved system 00:07: [io 0x0920-0x0923] has been reserved system 00:07: [io 0x0924] has been reserved system 00:07: [io 0x0c00-0x0c7f] has been reserved system 00:07: [io 0x0ca0-0x0ca7] has been reserved system 00:07: [io 0x0ca9-0x0cab] has been reserved system 00:07: [io 0x0cad-0x0caf] has been reserved system 00:08: [io 0x0ca8] has been reserved system 00:08: [io 0x0cac] has been reserved system 00:09: [mem 0xe0000000-0xefffffff] has been reserved system 00:0b: [mem 0xfed90000-0xfed91fff] has been reserved pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xd9ffffff] pci 0000:00:01.0: bridge window [mem pref disabled] pci 0000:00:03.0: PCI bridge to [bus 02-02] pci 0000:00:03.0: bridge window [io disabled] pci 0000:00:03.0: bridge window [mem 0xda000000-0xddffffff] pci 0000:00:03.0: bridge window [mem pref disabled] pci 0000:00:04.0: PCI bridge to [bus 03-03] pci 0000:00:04.0: bridge window [io 0xf000-0xffff] pci 0000:00:04.0: bridge window [mem 0xdf100000-0xdf1fffff] pci 0000:00:04.0: bridge window [mem pref disabled] pci 0000:00:05.0: PCI bridge to [bus 04-04] pci 0000:00:05.0: bridge window [io disabled] pci 0000:00:05.0: bridge window [mem disabled] pci 0000:00:05.0: bridge window [mem pref disabled] pci 0000:00:06.0: PCI bridge to [bus 05-05] pci 0000:00:06.0: bridge window [io disabled] pci 0000:00:06.0: bridge window [mem disabled] pci 0000:00:06.0: bridge window [mem pref disabled] pci 0000:00:07.0: PCI bridge to [bus 06-06] pci 0000:00:07.0: bridge window [io disabled] pci 0000:00:07.0: bridge window [mem disabled] pci 0000:00:07.0: bridge window [mem pref disabled] pci 0000:00:09.0: PCI bridge to [bus 07-07] pci 0000:00:09.0: bridge window [io disabled] pci 0000:00:09.0: bridge window [mem disabled] pci 0000:00:09.0: bridge window [mem pref disabled] pci 0000:08:03.0: BAR 6: assigned [mem 0xde000000-0xde00ffff pref] pci 0000:00:1e.0: PCI bridge to [bus 08-08] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff] pci 0000:00:1e.0: bridge window [mem 0xd5800000-0xd5ffffff 64bit pref] pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 pci 0000:00:04.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 pci 0000:00:05.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 pci 0000:00:09.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 10, 5242880 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 6, 393216 bytes) UDP-Lite hash table entries: 2048 (order: 6, 393216 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Trying to unpack rootfs image as initramfs... Freeing initrd memory: 9620k freed Intel AES-NI instructions are not detected. audit: initializing netlink socket (disabled) type=2000 audit(1302625000.516:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) OCFS2 1.5.0 ocfs2: Registered cluster interface o2cb OCFS2 DLMFS 1.5.0 OCFS2 User DLM kernel interface loaded OCFS2 Node Manager 1.5.0 OCFS2 DLM 1.5.0 msgmni has been set to 6464 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled ˙serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Real Time Clock Driver v1.12b Linux agpgart interface v0.103 brd: module loaded megasas: 00.00.05.34-rc1 Thu. Feb. 24 17:00:00 PDT 2011 megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 3:slot 0:func 0 megaraid_sas 0000:03:00.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 megasas: FW now in Ready state megasas_init_mfi: fw_support_ieee=0 megasas: INIT adapter done scsi0 : LSI SAS based MegaRAID driver scsi 0:0:0:0: Direct-Access SEAGATE ST3146356SS HS0A PQ: 0 ANSI: 5 scsi 0:0:1:0: Direct-Access SEAGATE ST3146356SS HS0A PQ: 0 ANSI: 5 scsi 0:0:2:0: Direct-Access SEAGATE ST3300656SS HS0A PQ: 0 ANSI: 5 scsi 0:0:3:0: Direct-Access SEAGATE ST3300656SS HS0A PQ: 0 ANSI: 5 Refined TSC clocksource calibration: 1994.999 MHz. Switching to clocksource tsc scsi 0:0:32:0: Enclosure DP BACKPLANE 1.07 PQ: 0 ANSI: 5 scsi 0:2:0:0: Direct-Access DELL PERC 6/i 1.22 PQ: 0 ANSI: 5 scsi 0:2:1:0: Direct-Access DELL PERC 6/i 1.22 PQ: 0 ANSI: 5 scsi: killing requests for dead queue ------------[ cut here ]------------ WARNING: at lib/kref.c:34 kref_get+0x2d/0x30() Hardware name: PowerEdge R710 Modules linked in: Pid: 386, comm: kworker/6:1 Not tainted 2.6.39-rc2+ #193 Call Trace: [] warn_slowpath_common+0x7a/0xb0 [] warn_slowpath_null+0x15/0x20 [] kref_get+0x2d/0x30 [] kobject_get+0x1a/0x30 [] get_device+0x14/0x20 [] scsi_request_fn+0x37/0x4a0 [] __blk_run_queue+0x6a/0x120 [] blk_delay_work+0x31/0x60 [] process_one_work+0x197/0x520 [] ? process_one_work+0x131/0x520 [] ? blk_insert_request+0xa0/0xa0 [] process_scheduled_works+0x2c/0x40 [] worker_thread+0x26e/0x330 [] ? manage_workers.clone.20+0x240/0x240 [] ? manage_workers.clone.20+0x240/0x240 [] kthread+0xa6/0xb0 [] kernel_thread_helper+0x4/0x10 [] ? finish_task_switch+0x6f/0x110 [] ? _raw_spin_unlock_irq+0x46/0x70 [] ? retint_restore_args+0x13/0x13 [] ? __init_kthread_worker+0x70/0x70 [] ? gs_change+0x13/0x13 ---[ end trace d1e6d87b12dd138b ]--- ------------[ cut here ]------------ WARNING: at lib/list_debug.c:47 __list_del_entry+0x63/0xd0() Hardware name: PowerEdge R710 list_del corruption, ffff8800c564d810->next is LIST_POISON1 (dead000000100100) Modules linked in: Pid: 386, comm: kworker/6:1 Tainted: G W 2.6.39-rc2+ #193 Call Trace: [] warn_slowpath_common+0x7a/0xb0 [] warn_slowpath_fmt+0x41/0x50 [] __list_del_entry+0x63/0xd0 [] list_del+0x11/0x40 [] scsi_device_dev_release_usercontext+0x4d/0x140 [] ? trace_hardirqs_on_caller+0x14d/0x190 [] ? scsi_device_cls_release+0x20/0x20 [] execute_in_process_context+0x86/0xa0 [] scsi_device_dev_release+0x17/0x20 [] device_release+0x22/0x90 [] ? retint_restore_args+0x13/0x13 [] kobject_release+0x45/0x90 [] ? kobject_del+0x40/0x40 [] kref_put+0x37/0x70 [] kobject_put+0x27/0x60 [] put_device+0x12/0x20 [] scsi_request_fn+0xb9/0x4a0 [] __blk_run_queue+0x6a/0x120 [] blk_delay_work+0x31/0x60 [] process_one_work+0x197/0x520 [] ? process_one_work+0x131/0x520 [] ? blk_insert_request+0xa0/0xa0 [] process_scheduled_works+0x2c/0x40 [] worker_thread+0x26e/0x330 [] ? manage_workers.clone.20+0x240/0x240 [] ? manage_workers.clone.20+0x240/0x240 [] kthread+0xa6/0xb0 [] kernel_thread_helper+0x4/0x10 [] ? finish_task_switch+0x6f/0x110 [] ? _raw_spin_unlock_irq+0x46/0x70 [] ? retint_restore_args+0x13/0x13 [] ? __init_kthread_worker+0x70/0x70 [] ? gs_change+0x13/0x13 ---[ end trace d1e6d87b12dd138c ]--- ------------[ cut here ]------------ WARNING: at lib/list_debug.c:47 __list_del_entry+0x63/0xd0() Hardware name: PowerEdge R710 list_del corruption, ffff8800c564d820->next is LIST_POISON1 (dead000000100100) Modules linked in: Pid: 386, comm: kworker/6:1 Tainted: G W 2.6.39-rc2+ #193 Call Trace: [] warn_slowpath_common+0x7a/0xb0 [] warn_slowpath_fmt+0x41/0x50 [] __list_del_entry+0x63/0xd0 [] list_del+0x11/0x40 [] scsi_device_dev_release_usercontext+0x57/0x140 [] ? trace_hardirqs_on_caller+0x14d/0x190 [] ? scsi_device_cls_release+0x20/0x20 [] execute_in_process_context+0x86/0xa0 [] scsi_device_dev_release+0x17/0x20 [] device_release+0x22/0x90 [] ? retint_restore_args+0x13/0x13 [] kobject_release+0x45/0x90 [] ? kobject_del+0x40/0x40 [] kref_put+0x37/0x70 [] kobject_put+0x27/0x60 [] put_device+0x12/0x20 [] scsi_request_fn+0xb9/0x4a0 [] __blk_run_queue+0x6a/0x120 [] blk_delay_work+0x31/0x60 [] process_one_work+0x197/0x520 [] ? process_one_work+0x131/0x520 [] ? blk_insert_request+0xa0/0xa0 [] process_scheduled_works+0x2c/0x40 [] worker_thread+0x26e/0x330 [] ? manage_workers.clone.20+0x240/0x240 [] ? manage_workers.clone.20+0x240/0x240 [] kthread+0xa6/0xb0 [] kernel_thread_helper+0x4/0x10 [] ? finish_task_switch+0x6f/0x110 [] ? _raw_spin_unlock_irq+0x46/0x70 [] ? retint_restore_args+0x13/0x13 [] ? __init_kthread_worker+0x70/0x70 [] ? gs_change+0x13/0x13 ---[ end trace d1e6d87b12dd138d ]--- ------------[ cut here ]------------ WARNING: at lib/list_debug.c:47 __list_del_entry+0x63/0xd0() Hardware name: PowerEdge R710 list_del corruption, ffff8800c564d890->next is LIST_POISON1 (dead000000100100) Modules linked in: Pid: 386, comm: kworker/6:1 Tainted: G W 2.6.39-rc2+ #193 Call Trace: [] warn_slowpath_common+0x7a/0xb0 [] warn_slowpath_fmt+0x41/0x50 [] __list_del_entry+0x63/0xd0 [] list_del+0x11/0x40 [] scsi_device_dev_release_usercontext+0x64/0x140 [] ? trace_hardirqs_on_caller+0x14d/0x190 [] ? scsi_device_cls_release+0x20/0x20 [] execute_in_process_context+0x86/0xa0 [] scsi_device_dev_release+0x17/0x20 [] device_release+0x22/0x90 [] ? retint_restore_args+0x13/0x13 [] kobject_release+0x45/0x90 [] ? kobject_del+0x40/0x40 [] kref_put+0x37/0x70 [] kobject_put+0x27/0x60 [] put_device+0x12/0x20 [] scsi_request_fn+0xb9/0x4a0 [] __blk_run_queue+0x6a/0x120 [] blk_delay_work+0x31/0x60 [] process_one_work+0x197/0x520 [] ? process_one_work+0x131/0x520 [] ? blk_insert_request+0xa0/0xa0 [] process_scheduled_works+0x2c/0x40 [] worker_thread+0x26e/0x330 [] ? manage_workers.clone.20+0x240/0x240 [] ? manage_workers.clone.20+0x240/0x240 [] kthread+0xa6/0xb0 [] kernel_thread_helper+0x4/0x10 [] ? finish_task_switch+0x6f/0x110 [] ? _raw_spin_unlock_irq+0x46/0x70 [] ? retint_restore_args+0x13/0x13 [] ? __init_kthread_worker+0x70/0x70 [] ? gs_change+0x13/0x13 ---[ end trace d1e6d87b12dd138e ]--- ------------[ cut here ]------------ WARNING: at lib/kref.c:34 kref_get+0x2d/0x30() Hardware name: PowerEdge R710 Modules linked in: Pid: 698, comm: kworker/4:2 Tainted: G W 2.6.39-rc2+ #193 Call Trace: [] warn_slowpath_common+0x7a/0xb0 [] warn_slowpath_null+0x15/0x20 [] kref_get+0x2d/0x30 [] kobject_get+0x1a/0x30 [] get_device+0x14/0x20 [] scsi_request_fn+0x37/0x4a0 [] __blk_run_queue+0x6a/0x120 [] blk_delay_work+0x31/0x60 [] process_one_work+0x197/0x520 [] ? process_one_work+0x131/0x520 [] ? blk_insert_request+0xa0/0xa0 [] process_scheduled_works+0x2c/0x40 [] worker_thread+0x26e/0x330 [] ? manage_workers.clone.20+0x240/0x240 [] ? manage_workers.clone.20+0x240/0x240 [] kthread+0xa6/0xb0 [] kernel_thread_helper+0x4/0x10 [] ? finish_task_switch+0x6f/0x110 [] ? _raw_spin_unlock_irq+0x46/0x70 [] ? retint_restore_args+0x13/0x13 [] ? __init_kthread_worker+0x70/0x70 [] ? gs_change+0x13/0x13 ---[ end trace d1e6d87b12dd138f ]--- ------------[ cut here ]------------ WARNING: at lib/list_debug.c:47 __list_del_entry+0x63/0xd0() Hardware name: PowerEdge R710 list_del corruption, ffff8800c564d810->next is LIST_POISON1 (dead000000100100) Modules linked in: Pid: 698, comm: kworker/4:2 Tainted: G W 2.6.39-rc2+ #193 Call Trace: [] warn_slowpath_common+0x7a/0xb0 [] warn_slowpath_fmt+0x41/0x50 [] __list_del_entry+0x63/0xd0 [] list_del+0x11/0x40 [] scsi_device_dev_release_usercontext+0x4d/0x140 [] ? trace_hardirqs_on_caller+0x14d/0x190 [] ? scsi_device_cls_release+0x20/0x20 [] execute_in_process_context+0x86/0xa0 [] scsi_device_dev_release+0x17/0x20 [] device_release+0x22/0x90 [] ? retint_restore_args+0x13/0x13 [] kobject_release+0x45/0x90 [] ? kobject_del+0x40/0x40 [] kref_put+0x37/0x70 [] kobject_put+0x27/0x60 [] put_device+0x12/0x20 [] scsi_request_fn+0xb9/0x4a0 [] __blk_run_queue+0x6a/0x120 [] blk_delay_work+0x31/0x60 [] process_one_work+0x197/0x520 [] ? process_one_work+0x131/0x520 [] ? blk_insert_request+0xa0/0xa0 [] process_scheduled_works+0x2c/0x40 [] worker_thread+0x26e/0x330 [] ? manage_workers.clone.20+0x240/0x240 [] ? manage_workers.clone.20+0x240/0x240 [] kthread+0xa6/0xb0 [] kernel_thread_helper+0x4/0x10 [] ? finish_task_switch+0x6f/0x110 [] ? _raw_spin_unlock_irq+0x46/0x70 [] ? retint_restore_args+0x13/0x13 [] ? __init_kthread_worker+0x70/0x70 [] ? gs_change+0x13/0x13 ---[ end trace d1e6d87b12dd1390 ]--- ------------[ cut here ]------------ WARNING: at lib/list_debug.c:47 __list_del_entry+0x63/0xd0() Hardware name: PowerEdge R710 list_del corruption, ffff8800c564d820->next is LIST_POISON1 (dead000000100100) Modules linked in: Pid: 698, comm: kworker/4:2 Tainted: G W 2.6.39-rc2+ #193 Call Trace: [] warn_slowpath_common+0x7a/0xb0 [] warn_slowpath_fmt+0x41/0x50 [] __list_del_entry+0x63/0xd0 [] list_del+0x11/0x40 [] scsi_device_dev_release_usercontext+0x57/0x140 [] ? trace_hardirqs_on_caller+0x14d/0x190 [] ? scsi_device_cls_release+0x20/0x20 [] execute_in_process_context+0x86/0xa0 [] scsi_device_dev_release+0x17/0x20 [] device_release+0x22/0x90 [] ? retint_restore_args+0x13/0x13 [] kobject_release+0x45/0x90 [] ? kobject_del+0x40/0x40 [] kref_put+0x37/0x70 [] kobject_put+0x27/0x60 [] put_device+0x12/0x20 [] scsi_request_fn+0xb9/0x4a0 [] __blk_run_queue+0x6a/0x120 [] blk_delay_work+0x31/0x60 [] process_one_work+0x197/0x520 [] ? process_one_work+0x131/0x520 [] ? blk_insert_request+0xa0/0xa0 [] process_scheduled_works+0x2c/0x40 [] worker_thread+0x26e/0x330 [] ? manage_workers.clone.20+0x240/0x240 [] ? manage_workers.clone.20+0x240/0x240 [] kthread+0xa6/0xb0 [] kernel_thread_helper+0x4/0x10 [] ? finish_task_switch+0x6f/0x110 [] ? _raw_spin_unlock_irq+0x46/0x70 [] ? retint_restore_args+0x13/0x13 [] ? __init_kthread_worker+0x70/0x70 [] ? gs_change+0x13/0x13 ---[ end trace d1e6d87b12dd1391 ]--- ------------[ cut here ]------------ WARNING: at lib/list_debug.c:47 __list_del_entry+0x63/0xd0() Hardware name: PowerEdge R710 list_del corruption, ffff8800c564d890->next is LIST_POISON1 (dead000000100100) Modules linked in: Pid: 698, comm: kworker/4:2 Tainted: G W 2.6.39-rc2+ #193 Call Trace: [] warn_slowpath_common+0x7a/0xb0 [] warn_slowpath_fmt+0x41/0x50 [] __list_del_entry+0x63/0xd0 [] list_del+0x11/0x40 [] scsi_device_dev_release_usercontext+0x64/0x140 [] ? trace_hardirqs_on_caller+0x14d/0x190 [] ? scsi_device_cls_release+0x20/0x20 [] execute_in_process_context+0x86/0xa0 [] scsi_device_dev_release+0x17/0x20 [] device_release+0x22/0x90 [] ? retint_restore_args+0x13/0x13 [] kobject_release+0x45/0x90 [] ? kobject_del+0x40/0x40 [] kref_put+0x37/0x70 [] kobject_put+0x27/0x60 [] put_device+0x12/0x20 [] scsi_request_fn+0xb9/0x4a0 [] __blk_run_queue+0x6a/0x120 [] blk_delay_work+0x31/0x60 [] process_one_work+0x197/0x520 [] ? process_one_work+0x131/0x520 [] ? blk_insert_request+0xa0/0xa0 [] process_scheduled_works+0x2c/0x40 [] worker_thread+0x26e/0x330 [] ? manage_workers.clone.20+0x240/0x240 [] ? manage_workers.clone.20+0x240/0x240 [] kthread+0xa6/0xb0 [] kernel_thread_helper+0x4/0x10 [] ? finish_task_switch+0x6f/0x110 [] ? _raw_spin_unlock_irq+0x46/0x70 [] ? retint_restore_args+0x13/0x13 [] ? __init_kthread_worker+0x70/0x70 [] ? gs_change+0x13/0x13 ---[ end trace d1e6d87b12dd1392 ]--- scsi: killing requests for dead queue scsi: killing requests for dead queue scsi: killing requests for dead queue scsi: killing requests for dead queue scsi: killing requests for dead queue scsi: killing requests for dead queue scsi: killing requests for dead queue scsi: killing requests for dead queue scsi: killing requests for dead queue scsi: killing requests for dead queue scsi: killing requests for dead queue scsi: killing requests for dead queue scsi: killing requests for dead queue scsi: killing requests for dead queue scsi: killing requests for dead queue scsi: killing requests for dead queue BUG: unable to handle kernel NULL pointer dereference at 00000000000002bc IP: [] scsi_sysfs_device_initialize+0xd3/0x150 PGD 0 Oops: 0000 [#1] PREEMPT SMP last sysfs file: CPU 4 Modules linked in: Pid: 1, comm: swapper Tainted: G W 2.6.39-rc2+ #193 Dell Inc. PowerEdge R710/0N047H RIP: 0010:[] [] scsi_sysfs_device_initialize+0xd3/0x150 RSP: 0018:ffff8800c90a18c0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8800c564d800 RCX: 00000000ffffffff RDX: 0000000000000000 RSI: 000000000000002f RDI: 0000000000000001 RBP: ffff8800c90a18f0 R08: 000000000000fffc R09: 000000000000fffe R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800379a6c10 R13: 0000000000000000 R14: ffff8800c564d9b0 R15: ffff8800c564dc20 FS: 0000000000000000(0000) GS:ffff8800cb800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000000002bc CR3: 0000000001c33000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff8800c90a0000, task ffff8800c909e040) Stack: ffff8800c566f000 ffff8800c564d800 ffff8800c566f000 ffff8800c5640000 0000000000000000 ffff8800c566f028 ffff8800c90a1930 ffffffff8147a49e ffff8800c90a1930 0000000000000000 ffff8800c566f000 0000000000000000 Call Trace: [] scsi_alloc_sdev+0x1ee/0x290 [] scsi_probe_and_add_lun+0x3a8/0xc30 [] ? trace_hardirqs_on+0xd/0x10 [] ? anon_transport_dummy_function+0x10/0x10 [] ? mutex_unlock+0x9/0x10 [] ? attribute_container_add_device+0x6c/0x140 [] ? kobject_get+0x1a/0x30 [] ? scsi_alloc_target+0x2a1/0x2d0 [] ? kobject_del+0x40/0x40 [] __scsi_scan_target+0x102/0x770 [] ? sub_preempt_count+0xa9/0xe0 [] scsi_scan_channel+0x86/0xb0 [] scsi_scan_host_selected+0xf8/0x1a0 [] do_scsi_scan_host+0x89/0x90 [] scsi_scan_host+0x198/0x1f0 [] megasas_probe_one+0x127b/0x1535 [] pci_device_probe+0xf2/0x110 [] ? driver_sysfs_add+0x7a/0xb0 [] driver_probe_device+0x89/0x1a0 [] __driver_attach+0xa3/0xb0 [] ? driver_probe_device+0x1a0/0x1a0 [] bus_for_each_dev+0x5e/0x90 [] driver_attach+0x19/0x20 [] bus_add_driver+0xba/0x270 [] ? megaraid_init+0xbc/0xbc [] driver_register+0x6f/0x130 [] ? megaraid_init+0xbc/0xbc [] __pci_register_driver+0x61/0xe0 [] ? megaraid_init+0xbc/0xbc [] megasas_init+0x9c/0x1e6 [] do_one_initcall+0x3f/0x1a0 [] kernel_init+0xde/0x163 [] kernel_thread_helper+0x4/0x10 [] ? finish_task_switch+0x6f/0x110 [] ? _raw_spin_unlock_irq+0x46/0x70 [] ? retint_restore_args+0x13/0x13 [] ? start_kernel+0x4ca/0x4ca [] ? gs_change+0x13/0x13 Code: 89 83 20 04 00 00 48 c7 c6 0d a5 a1 81 48 8b 03 48 c7 83 78 06 00 00 60 38 cb 81 4c 89 ff 8b 90 24 02 00 00 31 c0 e8 0d 2c fe ff 0f b6 85 bc 02 00 00 4c 89 f7 88 83 e9 00 00 00 e8 07 9c fe RIP [] scsi_sysfs_device_initialize+0xd3/0x150 RSP CR2: 00000000000002bc ---[ end trace d1e6d87b12dd1393 ]--- swapper used greatest stack depth: 3576 bytes left Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: swapper Tainted: G D W 2.6.39-rc2+ #193 Call Trace: [] panic+0x96/0x1ab [] ? do_exit+0x7bd/0x900 [] ? _raw_write_lock_irq+0x7d/0x90 [] do_exit+0x83b/0x900 [] oops_end+0x97/0xd0 [] no_context+0xf0/0x260 [] ? mark_held_locks+0x6b/0xa0 [] __bad_area_nosemaphore+0x125/0x1f0 [] ? native_sched_clock+0x2e/0x80 [] ? do_page_fault+0x2bd/0x560 [] bad_area_nosemaphore+0xe/0x10 [] do_page_fault+0x42e/0x560 [] ? vsnprintf+0x471/0x610 [] ? trace_hardirqs_off_thunk+0x3a/0x3c [] page_fault+0x25/0x30 [] ? scsi_sysfs_device_initialize+0xd3/0x150 [] scsi_alloc_sdev+0x1ee/0x290 [] scsi_probe_and_add_lun+0x3a8/0xc30 [] ? trace_hardirqs_on+0xd/0x10 [] ? anon_transport_dummy_function+0x10/0x10 [] ? mutex_unlock+0x9/0x10 [] ? attribute_container_add_device+0x6c/0x140 [] ? kobject_get+0x1a/0x30 [] ? scsi_alloc_target+0x2a1/0x2d0 [] ? kobject_del+0x40/0x40 [] __scsi_scan_target+0x102/0x770 [] ? sub_preempt_count+0xa9/0xe0 [] scsi_scan_channel+0x86/0xb0 [] scsi_scan_host_selected+0xf8/0x1a0 [] do_scsi_scan_host+0x89/0x90 [] scsi_scan_host+0x198/0x1f0 [] megasas_probe_one+0x127b/0x1535 [] pci_device_probe+0xf2/0x110 [] ? driver_sysfs_add+0x7a/0xb0 [] driver_probe_device+0x89/0x1a0 [] __driver_attach+0xa3/0xb0 [] ? driver_probe_device+0x1a0/0x1a0 [] bus_for_each_dev+0x5e/0x90 [] driver_attach+0x19/0x20 [] bus_add_driver+0xba/0x270 [] ? megaraid_init+0xbc/0xbc [] driver_register+0x6f/0x130 [] ? megaraid_init+0xbc/0xbc [] __pci_register_driver+0x61/0xe0 [] ? megaraid_init+0xbc/0xbc [] megasas_init+0x9c/0x1e6 [] do_one_initcall+0x3f/0x1a0 [] kernel_init+0xde/0x163 [] kernel_thread_helper+0x4/0x10 [] ? finish_task_switch+0x6f/0x110 [] ? _raw_spin_unlock_irq+0x46/0x70 [] ? retint_restore_args+0x13/0x13 [] ? start_kernel+0x4ca/0x4ca [] ? gs_change+0x13/0x13