| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <alpine.DEB.2.00.1104201530430.13948@chino.kir.corp.google.com>
Date: Wed, 20 Apr 2011 16:12:36 -0700 (PDT)
From: David Rientjes <rientjes@...gle.com>
To: James Bottomley <James.Bottomley@...senpartnership.com>
cc: KOSAKI Motohiro <kosaki.motohiro@...fujitsu.com>,
Pekka Enberg <penberg@...nel.org>,
Christoph Lameter <cl@...ux.com>,
Michal Hocko <mhocko@...e.cz>,
Andrew Morton <akpm@...ux-foundation.org>,
Hugh Dickins <hughd@...gle.com>, linux-mm@...ck.org,
LKML <linux-kernel@...r.kernel.org>,
linux-parisc@...r.kernel.org, Ingo Molnar <mingo@...e.hu>,
x86 maintainers <x86@...nel.org>
Subject: Re: [PATCH v3] mm: make expand_downwards symmetrical to
expand_upwards
On Wed, 20 Apr 2011, James Bottomley wrote:
> > This is probably because the parisc's DISCONTIGMEM memory ranges don't
> > have bits set in N_NORMAL_MEMORY.
> >
> > diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
> > --- a/arch/parisc/mm/init.c
> > +++ b/arch/parisc/mm/init.c
> > @@ -266,8 +266,10 @@ static void __init setup_bootmem(void)
> > }
> > memset(pfnnid_map, 0xff, sizeof(pfnnid_map));
> >
> > - for (i = 0; i < npmem_ranges; i++)
> > + for (i = 0; i < npmem_ranges; i++) {
> > + node_set_state(i, N_NORMAL_MEMORY);
> > node_set_online(i);
> > + }
> > #endif
>
> Yes, this seems to be the missing piece that gets it to boot. We really
> need this in generic code, unless someone wants to run through all the
> other arch's doing it ...
>
Looking at all other architectures that allow ARCH_DISCONTIGMEM_ENABLE, we
already know x86 is fine, avr32 disables ARCH_DISCONTIGMEM_ENABLE entirely
because its code only brings online node 0, and tile already sets the bit
in N_NORMAL_MEMORY correctly when bringing a node online, probably because
it was introduced after the various node state masks were added in
7ea1530ab3fd back in October 2007.
So we're really only talking about alpha, ia64, m32r, m68k, and mips and
it only seems to matter when using CONFIG_SLUB, which isn't surprising
when greping for it:
$ grep -r N_NORMAL_MEMORY mm/*
mm/memcontrol.c: if (!node_state(node, N_NORMAL_MEMORY))
mm/memcontrol.c: if (!node_state(node, N_NORMAL_MEMORY))
mm/page_alloc.c: [N_NORMAL_MEMORY] = { { [0] = 1UL } },
mm/page_alloc.c: node_set_state(zone_to_nid(zone), N_NORMAL_MEMORY);
mm/slub.c: for_each_node_state(node, N_NORMAL_MEMORY) {
mm/slub.c: for_each_node_state(node, N_NORMAL_MEMORY) {
mm/slub.c: for_each_node_state(node, N_NORMAL_MEMORY) {
mm/slub.c: for_each_node_state(node, N_NORMAL_MEMORY) {
mm/slub.c: for_each_node_state(node, N_NORMAL_MEMORY) {
mm/slub.c: for_each_node_state(node, N_NORMAL_MEMORY) {
mm/slub.c: for_each_node_state(node, N_NORMAL_MEMORY) {
mm/slub.c: for_each_node_state(node, N_NORMAL_MEMORY) {
mm/slub.c: for_each_node_state(node, N_NORMAL_MEMORY) {
mm/slub.c: for_each_node_state(node, N_NORMAL_MEMORY)
Those memory controller occurrences only result in it passing a node id of
-1 to kmalloc_node() which means no specific node target, and that's fine
for DISCONTIGMEM since we don't care about any proximity between memory
ranges.
This should fix the remaining architectures so they can use CONFIG_SLUB,
but I hope it can be tested by the individual arch maintainers like you
did for parisc.
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -245,6 +245,7 @@ setup_memory_node(int nid, void *kernel_end)
bootmap_size, BOOTMEM_DEFAULT);
printk(" reserving pages %ld:%ld\n", bootmap_start, bootmap_start+PFN_UP(bootmap_size));
+ node_set_state(nid, N_NORMAL_MEMORY);
node_set_online(nid);
}
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -573,6 +573,8 @@ void __init find_memory(void)
map>>PAGE_SHIFT,
bdp->node_min_pfn,
bdp->node_low_pfn);
+ if (node_present_pages(node))
+ node_set_state(node, N_NORMAL_MEMORY);
}
efi_memmap_walk(filter_rsvd_memory, free_node_bootmem);
diff --git a/arch/m32r/kernel/setup.c b/arch/m32r/kernel/setup.c
--- a/arch/m32r/kernel/setup.c
+++ b/arch/m32r/kernel/setup.c
@@ -247,7 +247,9 @@ void __init setup_arch(char **cmdline_p)
#ifdef CONFIG_DISCONTIGMEM
nodes_clear(node_online_map);
+ node_set_state(0, N_NORMAL_MEMORY); /* always has memory */
node_set_online(0);
+ node_set_state(1, N_NORMAL_MEMORY); /* always has memory */
node_set_online(1);
#endif /* CONFIG_DISCONTIGMEM */
diff --git a/arch/m68k/mm/init_mm.c b/arch/m68k/mm/init_mm.c
--- a/arch/m68k/mm/init_mm.c
+++ b/arch/m68k/mm/init_mm.c
@@ -59,6 +59,8 @@ void __init m68k_setup_node(int node)
}
#endif
pg_data_map[node].bdata = bootmem_node_data + node;
+ if (node_present_pages(node))
+ node_set_state(node, N_NORMAL_MEMORY);
node_set_online(node);
}
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -471,6 +471,8 @@ void __init paging_init(void)
if (end_pfn > max_low_pfn)
max_low_pfn = end_pfn;
+ if (end_pfn > start_pfn)
+ node_set_state(node, N_NORMAL_MEMORY);
}
zones_size[ZONE_NORMAL] = max_low_pfn;
free_area_init_nodes(zones_size);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists