linux-kernel - Re: [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <62B5223C-AFC9-4DF6-B0BD-2678E082047D@niasdigital.com>
Date:	Thu, 21 Apr 2011 10:29:11 +1000
From:	Ben Nizette <bn@...sdigital.com>
To:	Linus Walleij <linus.walleij@...aro.org>
Cc:	Alan Cox <alan@...rguk.ukuu.org.uk>, linux-kernel@...r.kernel.org,
	Grant Likely <grant.likely@...retlab.ca>,
	Lee Jones <lee.jones@...aro.org>,
	linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 1/2] gpio: add pin biasing and drive mode to gpiolib

RESEND, sorry if you get this twice.  Crappy MUA..

On 20/04/2011, at 10:21 PM, Linus Walleij wrote:

> 2011/4/19 Ben Nizette <bn@...sdigital.com>:
>> On 18/04/2011, at 10:26 PM, Alan Cox wrote:
>> 
>>> The logical extension to that is to delete the gpio layer because the
>>> board code can do it ?
>> 
>> Well anything that is done once at startup, yes,
> 
> This patch is about biasing and drive modes. We need to alter
> these at runtime (from board code, indeed) due to the fact that
> when you go to sleep e.g. floating a pin yeilds better power
> characteristics.

This is actually an interesting case because floating pins yeild
/worse/ power characteristics (each transistor of the push-pull
is on a little bit and you get a path straight through) [1].  To
get good power performance you want to pull an input pin high or
low but which of those two directions depends on external
constraints, i.e. the board.  This is a case where the driver
should /not/ go playing with things it can't fully understand.

Perhaps one of the properties that a board can set in a gpio chip
driver is the suspend state and have suspend/resume hooks in the
gpio chip take care of setting things up on each side.

	--Ben.

[1] http://processors.wiki.ti.com/index.php/Optimizing_IO_Power_Consumption

> 
> Linus Walleij

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/