[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1303460491.28545.12.camel@marge.simson.net>
Date: Fri, 22 Apr 2011 10:21:31 +0200
From: Mike Galbraith <efault@....de>
To: Thomas Giesel <skoe@...ectbox.com>
Cc: linux-kernel@...r.kernel.org,
Peter Zijlstra <a.p.zijlstra@...llo.nl>
Subject: Re: rt scheduler may calculate wrong rt_time
On Thu, 2011-04-21 at 14:55 +0200, Thomas Giesel wrote:
> Friends of the scheduler,
>
> I found that the current (well, at least 2.6.38) scheduler calculates a
> wrong rt_time for realtime tasks in certain situations.
>
> Example scenario:
> - HZ = 1000, rt_runtime = 95 ms, rt_period = 100 ms (similar with other
> setups, but that's what I did)
> - a high priority rt task (A) gets packets from Ethernet about every 10
> ms
> - a low priority rt task (B) unfortunately runs for a longer time
> (here: endlessly :)
> - no other tasks running (i.e. about 5 ms idle left per period)
>
> When the runtime of the realtime tasks is exceeded (e.g. by (B)), they
> are throttled. During this time idle is scheduled. When in idle,
> tick_nohz_stop_sched_tick() will stop the scheduler tick, which causes
> update_rq_clock() _not_ to be called for a while. When a realtime task
> is woken up during this time (e.g. (A) by network traffic),
> update_rq_clock() is called from enqueue_task(). The task is not picked
> yet, because it is still throttled. After a while
> sched_rt_period_timer() unthrottles the realtime tasks and cpu_idle
> will call schedule().
>
> schedule() picks (A) which has been woken up a while ago.
> _pick_next_task_rt() sets exec_start to rq->clock_task. But this has
> been updated last time when the task was woken up, which could have
> been up to 5 ms ago in my example. So exec_start contains a time
> _before_ the task was actually started. As a result of this, rt_time is
> calculated too large which makes the rt tasks being throttled even
> earlier in the next period. This error may even increase from interval
> to interval, because the throttle-window (initially 5 ms) also
> increases.
>
> IMHO the best place to update clock_task would be to call a function
> from tick_nohz_restart_sched_tick(). But currently I don't see a
> suitable interface to the scheduler to do this. Currently I call
> update_rq_clock(rq) just before put_prev_task() in schedule(). This
> solves the issue and causes rt_runtime to be kept quite accurately.
> (Well, same result would be to remove "if (...)" in put_prev_task())
Hm. Does forcing a clock update if we're idle when we release the
throttle do the trick?
diff --git a/kernel/sched.c b/kernel/sched.c
index 8cb0a57..97245ef 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -464,7 +464,7 @@ struct rq {
u64 nohz_stamp;
unsigned char nohz_balance_kick;
#endif
- unsigned int skip_clock_update;
+ int skip_clock_update;
/* capture load from *all* tasks on this cpu: */
struct load_weight load;
@@ -650,7 +650,7 @@ static void update_rq_clock(struct rq *rq)
{
s64 delta;
- if (rq->skip_clock_update)
+ if (rq->skip_clock_update > 0)
return;
delta = sched_clock_cpu(cpu_of(rq)) - rq->clock;
@@ -4131,7 +4131,7 @@ static inline void schedule_debug(struct task_struct *prev)
static void put_prev_task(struct rq *rq, struct task_struct *prev)
{
- if (prev->on_rq)
+ if (prev->on_rq || rq->skip_clock_update < 0)
update_rq_clock(rq);
prev->sched_class->put_prev_task(rq, prev);
}
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 19ecb31..3276b94 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -572,8 +572,15 @@ static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun)
enqueue = 1;
}
- if (enqueue)
+ if (enqueue) {
+ /*
+ * Tag a forced clock update if we're coming out of idle
+ * so rq->clock_task will be updated when we schedule().
+ */
+ if (rq->curr == rq->idle)
+ rq->skip_clock_update = -1;
sched_rt_rq_enqueue(rt_rq);
+ }
raw_spin_unlock(&rq->lock);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists